Po zainstalowaniu urządznie mfc250c w debianie 13 ni edziała skaner
: 09 marca 2026, 13:22
zainstalowałem wszystko skryptem ze strony producenta jednakże
próbowałem przeinstalować stery ale nic z tego
Kod: Zaznacz cały
sudo scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
Kod: Zaznacz cały
sudo sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found possible USB scanner (vendor=0x04f9 [Brother], product=0x01fe [MFC-250C]) at libusb:001:004
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
pk28@mypc:~$