Po kompilacja jądra 3.9.2 nie można uruchomić gnome - czarny ekran
: 23 maja 2013, 21:10
Witam.
Próbuję kompilować jądro do wersji 3.9.2. Niby wszystko poszło bez błędów, ale nie mogę wystartować gnome. Po wpisaniu:
pojawia się tylko czarny ekran.
Opcje jadra dla sekcji grafiki:



Zaznaczenie opcji:
powoduje, że system się ładuje (ale jest czarny ekran i nic nie widać). Problem ten można rozwiązać przez dodanie opcji:
w grub.cfg.
Ma ktoś jakieś pomysły gdzie jest problem? Dlaczego nie uruchamia się gnome? Na standardowym jądrze wszystko działa poprawnie.
Próbuję kompilować jądro do wersji 3.9.2. Niby wszystko poszło bez błędów, ale nie mogę wystartować gnome. Po wpisaniu:
Kod: Zaznacz cały
startx
Kod: Zaznacz cały
lspci | grep VGA
Kod: Zaznacz cały
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
Kod: Zaznacz cały
cat /var/log/Xorg.0.log | grep intel
Kod: Zaznacz cały
[ 41.036] (II) LoadModule: "intel"
[ 41.036] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 41.066] (II) Module intel: vendor="X.Org Foundation"
[ 41.066] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
[ 41.074] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 41.074] (==) intel(0): RGB weight 888
[ 41.074] (==) intel(0): Default visual is TrueColor
[ 41.074] (II) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
[ 41.074] (--) intel(0): Chipset: "Ivybridge Mobile (GT2)"
[ 41.074] (**) intel(0): Relaxed fencing enabled
[ 41.074] (**) intel(0): Wait on SwapBuffers? enabled
[ 41.074] (**) intel(0): Triple buffering? enabled
[ 41.074] (**) intel(0): Framebuffer tiled
[ 41.074] (**) intel(0): Pixmaps tiled
[ 41.074] (**) intel(0): 3D buffers tiled
[ 41.075] (**) intel(0): SwapBuffers wait enabled
[ 41.075] (==) intel(0): video overlay key set to 0x101fe
[ 41.075] (II) intel(0): Output LVDS1 using monitor section Monitor0
[ 41.075] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 41.075] (II) intel(0): Output VGA1 has no monitor section
[ 41.076] (II) intel(0): Output HDMI1 has no monitor section
[ 41.124] (II) intel(0): Output DP1 has no monitor section
[ 41.124] (II) intel(0): EDID for output LVDS1
[ 41.124] (II) intel(0): Manufacturer: LGD Model: 33a Serial#: 0
[ 41.124] (II) intel(0): Year: 2011 Week: 0
[ 41.124] (II) intel(0): EDID Version: 1.3
[ 41.124] (II) intel(0): Digital Display Input
[ 41.124] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 41.124] (II) intel(0): Gamma: 2.20
[ 41.124] (II) intel(0): No DPMS capabilities specified
[ 41.124] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 41.124] (II) intel(0): First detailed timing is preferred mode
[ 41.124] (II) intel(0): redX: 0.618 redY: 0.369 greenX: 0.355 greenY: 0.603
[ 41.124] (II) intel(0): blueX: 0.151 blueY: 0.103 whiteX: 0.313 whiteY: 0.329
[ 41.124] (II) intel(0): Manufacturer's mask: 0
[ 41.124] (II) intel(0): Supported detailed timing:
[ 41.124] (II) intel(0): clock: 70.0 MHz Image Size: 344 x 194 mm
[ 41.124] (II) intel(0): h_active: 1366 h_sync: 1402 h_sync_end 1450 h_blank_end 1492 h_border: 0
[ 41.124] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 776 v_blanking: 782 v_border: 0
[ 41.124] (II) intel(0): LG Display
[ 41.124] (II) intel(0): LP156WH4-TLN1
[ 41.124] (II) intel(0): EDID (in hex):
[ 41.124] (II) intel(0): 00ffffffffffff0030e43a0300000000
[ 41.124] (II) intel(0): 00150103802213780a61d59e5e5b9a26
[ 41.124] (II) intel(0): 1a505400000001010101010101010101
[ 41.124] (II) intel(0): 010101010101581b567e50000e302430
[ 41.125] (II) intel(0): 350058c2100000190000000000000000
[ 41.125] (II) intel(0): 00000000000000000000000000fe004c
[ 41.125] (II) intel(0): 4720446973706c61790a2020000000fe
[ 41.125] (II) intel(0): 004c503135365748342d544c4e310083
[ 41.125] (II) intel(0): EDID vendor "LGD", prod id 826
[ 41.125] (II) intel(0): Printing DDC gathered Modelines:
[ 41.125] (II) intel(0): Modeline "1366x768"x0.0 70.00 1366 1402 1450 1492 768 771 776 782 -hsync -vsync (46.9 kHz eP)
[ 41.125] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 41.125] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 41.125] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 41.125] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 41.125] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 41.125] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 41.125] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 41.125] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 41.125] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 41.125] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 41.125] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 41.125] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 41.125] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 41.125] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 41.125] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 41.125] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 41.125] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 41.125] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 41.125] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 41.125] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 41.125] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 41.126] (II) intel(0): Printing probed modes for output LVDS1
[ 41.126] (II) intel(0): Modeline "1366x768"x60.0 70.00 1366 1402 1450 1492 768 771 776 782 -hsync -vsync (46.9 kHz eP)
[ 41.126] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d)
[ 41.126] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d)
[ 41.126] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 41.126] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 41.126] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 41.126] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 41.126] (II) intel(0): EDID for output VGA1
[ 41.126] (II) intel(0): EDID for output HDMI1
[ 41.176] (II) intel(0): EDID for output DP1
[ 41.176] (II) intel(0): Output LVDS1 connected
[ 41.176] (II) intel(0): Output VGA1 disconnected
[ 41.176] (II) intel(0): Output HDMI1 disconnected
[ 41.176] (II) intel(0): Output DP1 disconnected
[ 41.176] (II) intel(0): Using exact sizes for initial modes
[ 41.176] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 41.176] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 41.176] (II) intel(0): Kernel page flipping support detected, enabling
[ 41.176] (**) intel(0): Display dimensions: (340, 190) mm
[ 41.176] (**) intel(0): DPI set to (102, 102)
[ 41.202] (II) intel(0): [DRI2] Setup complete
[ 41.202] (II) intel(0): [DRI2] DRI driver: i965
[ 41.202] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 41.205] (==) intel(0): Backing store disabled
[ 41.205] (==) intel(0): Silken mouse enabled
[ 41.205] (II) intel(0): Initializing HW Cursor
[ 41.205] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 41.207] (==) intel(0): DPMS enabled
[ 41.207] (==) intel(0): Intel XvMC decoder enabled
[ 41.207] (II) intel(0): Set up textured video
[ 41.207] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 41.207] (II) intel(0): direct rendering: DRI2 Enabled
[ 41.207] (==) intel(0): hotplug detection: "enabled"
[ 41.422] (II) intel(0): Setting screen physical size to 361 x 203
[ 41.985] (II) intel(0): EDID vendor "LGD", prod id 826
[ 41.985] (II) intel(0): Printing DDC gathered Modelines:
[ 41.985] (II) intel(0): Modeline "1366x768"x0.0 70.00 1366 1402 1450 1492 768 771 776 782 -hsync -vsync (46.9 kHz eP)
[ 45.361] (II) intel(0): EDID vendor "LGD", prod id 826
[ 45.362] (II) intel(0): Printing DDC gathered Modelines:
[ 45.362] (II) intel(0): Modeline "1366x768"x0.0 70.00 1366 1402 1450 1492 768 771 776 782 -hsync -vsync (46.9 kHz eP)
[ 58.770] (II) intel(0): EDID vendor "LGD", prod id 826
[ 58.770] (II) intel(0): Printing DDC gathered Modelines:
[ 58.770] (II) intel(0): Modeline "1366x768"x0.0 70.00 1366 1402 1450 1492 768 771 776 782 -hsync -vsync (46.9 kHz eP)
[ 60.385] (II) intel(0): EDID vendor "LGD", prod id 826
[ 60.385] (II) intel(0): Printing DDC gathered Modelines:
[ 60.385] (II) intel(0): Modeline "1366x768"x0.0 70.00 1366 1402 1450 1492 768 771 776 782 -hsync -vsync (46.9 kHz eP)
[ 61.997] (II) intel(0): EDID vendor "LGD", prod id 826
[ 61.997] (II) intel(0): Printing DDC gathered Modelines:
[ 61.997] (II) intel(0): Modeline "1366x768"x0.0 70.00 1366 1402 1450 1492 768 771 776 782 -hsync -vsync (46.9 kHz eP)



Zaznaczenie opcji:
Kod: Zaznacz cały
[*]Enable modesetting on intel by default
Kod: Zaznacz cały
nomodeset[/I] lub [I]i915.modeset=0
Ma ktoś jakieś pomysły gdzie jest problem? Dlaczego nie uruchamia się gnome? Na standardowym jądrze wszystko działa poprawnie.