Środowisko graficzne nie zawsze się uruchamia, czarny ekran
: 09 listopada 2012, 12:29
Witam.
Mam kolejny problem z Debianem. Zainstalowałem środowisko graficzne LXDE, xorg też zainstalowany. GRUB chyba normalnie działa, ostatnie jego polecenie jakie widzę to
i po tym pojawia się czarny ekran. Nic wtedy nie da się zrobić, nie da przełączyć się między konsolami, pozostaje jedynie zrestartowanie komputera. Najśmieszniejsze jest to, że niekiedy środowisko graficzne uruchamia się prawidłowo, choć ostatnio coś już nie chce.
http://wklej.se/Xorg.0.log
Reinstalowałem xorg, LXDE, próbowałem też zainstalować sterowniki do karty wg tego sposobu -> http://forum.dobreprogramy.pl/bledy-prz ... 22105.html ale nie wychodzi
Z tego co zauważyłem w /var/log/Xorg.0.log to system chyba męczy się z ustawieniem rozdzielczości i z częstotliwością odświeżania, nie wiem czy tak ma być? Jak ustawić rozdzielczość monitora z konsoli?
Edycja:
Dobrze,, zainstalowałem sterowniki karty, przez modconf dodałem je do jądra. Rekonfigurowałem xorg, ale dalej to samo. Jedynie zmieniła się rozdzielczość ekranu.
Tutaj /var/log/Xorg.0.log
http://wklej.se/xorg12233123
Po wpisaniu startx przechodzi do środowiska graficznego, a po wylogowaniu w konsoli widać:
I zaczyna pojawiać się komenda
I ciągle pojawia się nowa, że nie można nawet nic wpisać w konsolę.
Co to za błąd?
Proszę o pomoc
Mam kolejny problem z Debianem. Zainstalowałem środowisko graficzne LXDE, xorg też zainstalowany. GRUB chyba normalnie działa, ostatnie jego polecenie jakie widzę to
Kod: Zaznacz cały
Starting Gnome Display Manager: GDMKod: Zaznacz cały
uname -a
Linux debian 2.6.32-5-686 #1 SMP Sun Sep 23 09:49:36 UTC 2012 i686 GNU/LinuxKod: Zaznacz cały
root@debian:~#dpkg --print-architecture
i386Kod: Zaznacz cały
/var/log/Xorg.0.logKod: Zaznacz cały
lspci-k
00:00.0Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Hostbridge (rev 03)
Kernel driver in use: agpgart-intel
00:01.0PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge(rev 03)
00:02.0 CardBus bridge: Texas Instruments PCI1450 (rev03)
Subsystem: IBM ThinkPad 600X/A21m/T20/T22
Kernel driverin use: yenta_cardbus
00:02.1 CardBus bridge: Texas InstrumentsPCI1450 (rev 03)
Subsystem: IBM ThinkPad600X/A21m/T20/T22
Kernel driver in use: yenta_cardbus
00:03.0Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100(rev 09)
Subsystem: Intel Corporation EtherExpress PRO/100+MiniPCI
Kernel driver in use: e100
00:03.1 Serial controller:Xircom Mini-PCI V.90 56k Modem
Subsystem: Intel CorporationDevice 2408
Kernel driver in use: serial
00:05.0 Multimediaaudio controller: Cirrus Logic CS 4614/22/24/30 [CrystalClearSoundFusion Audio Accelerator] (rev 01)
Subsystem: IBM ThinkPad600X/A20m
00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4ISA (rev 02)
00:07.1 IDE interface: Intel Corporation82371AB/EB/MB PIIX4 IDE (rev 01)
Kernel driver in use:ata_piix
00:07.2 USB Controller: Intel Corporation 82371AB/EB/MBPIIX4 USB (rev 01)
Kernel driver in use: uhci_hcd
00:07.3Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03)
01:00.0VGA compatible controller: S3 Inc. 86C270-294 Savage/IX-MV (rev11)
Subsystem: IBM ThinkPad T20/T22Kod: Zaznacz cały
lspci-n
00:00.00600: 8086:7190 (rev 03)
00:01.0 0604: 8086:7191 (rev 03)
00:02.00607: 104c:ac1b (rev 03)
00:02.1 0607: 104c:ac1b (rev 03)
00:03.00200: 8086:1229 (rev 09)
00:03.1 0700: 115d:000c
00:05.0 0401:1013:6003 (rev 01)
00:07.0 0680: 8086:7110 (rev 02)
00:07.10101: 8086:7111 (rev 01)
00:07.2 0c03: 8086:7112 (rev 01)
00:07.30680: 8086:7113 (rev 03)
01:00.0 0300: 5333:8c12 (rev 11)Reinstalowałem xorg, LXDE, próbowałem też zainstalować sterowniki do karty wg tego sposobu -> http://forum.dobreprogramy.pl/bledy-prz ... 22105.html ale nie wychodzi
Kod: Zaznacz cały
/pen# sh 4033-Savage_4.0.4_binary
4033-Savage_4.0.3_binary: 1: Syntax error: "(" unexpectedKod: Zaznacz cały
cat /etc/X11/xorg.conf
cat: /etc/X11/xorg.conf: No such file or directory
X -configure
Your xorg/conf file is /root/xorg.conf.newKod: Zaznacz cały
Cat /root/xorg.conf.new
Kod: Zaznacz cały
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "built-ins"
EndSection
Section "Module"
Load "glx"
Load "dri2"
Load "extmod"
Load "record"
Load "dbe"
Load "dri"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # <str>
#Option "HWCursor" # [<bool>]
#Option "SWCursor" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "Rotate" # [<str>]
#Option "UseBIOS" # [<bool>]
#Option "LCDClock" # <freq>
#Option "ShadowStatus" # [<bool>]
#Option "CrtOnly" # [<bool>]
#Option "TvOn" # [<bool>]
#Option "PAL" # [<bool>]
#Option "ForceInit" # [<bool>]
#Option "Overlay" # [<str>]
#Option "TransparencyKey" # [<str>]
#Option "ForceInit" # [<bool>]
#Option "DisableXVMC" # [<bool>]
#Option "DisableTile" # [<bool>]
#Option "DisableCOB" # [<bool>]
#Option "BCIforXv" # [<bool>]
#Option "DVI" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "BusType" # [<str>]
#Option "DmaType" # [<str>]
#Option "DmaMode" # [<str>]
#Option "AGPMode" # <i>
#Option "AGPSize" # <i>
#Option "DRI" # [<bool>]
#Option "AGPforXv" # [<bool>]
Identifier "Card0"
Driver "savage"
VendorName "S3 Inc."
BoardName "86C270-294 Savage/IX-MV"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSectionDobrze,, zainstalowałem sterowniki karty, przez modconf dodałem je do jądra. Rekonfigurowałem xorg, ale dalej to samo. Jedynie zmieniła się rozdzielczość ekranu.
Tutaj /var/log/Xorg.0.log
http://wklej.se/xorg12233123
Kod: Zaznacz cały
lspci -k 00:00.0 Host bridge: Intel Corporation440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
Kernel driver inuse: agpgart-intel
00:01.0 PCI bridge: Intel Corporation440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
00:02.0 CardBusbridge: Texas Instruments PCI1450 (rev 03)
Subsystem: IBMThinkPad 600X/A21m/T20/T22
Kernel driver in use:yenta_cardbus
00:02.1 CardBus bridge: Texas Instruments PCI1450(rev 03)
Subsystem: IBM ThinkPad 600X/A21m/T20/T22
Kerneldriver in use: yenta_cardbus
00:03.0 Ethernet controller: IntelCorporation 82557/8/9/0/1 Ethernet Pro 100 (rev 09)
Subsystem:Intel Corporation EtherExpress PRO/100+ MiniPCI
Kernel driver inuse: e100
00:03.1 Serial controller: Xircom Mini-PCI V.90 56kModem
Subsystem: Intel Corporation Device 2408
Kernel driverin use: serial
00:05.0 Multimedia audio controller: Cirrus LogicCS 4614/22/24/30 [CrystalClear SoundFusion Audio Accelerator] (rev01)
Subsystem: IBM ThinkPad 600X/A20m
00:07.0 Bridge: IntelCorporation 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDEinterface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
Kerneldriver in use: ata_piix
00:07.2 USB Controller: Intel Corporation82371AB/EB/MB PIIX4 USB (rev 01)
Kernel driver in use:uhci_hcd
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4ACPI (rev 03)
01:00.0 VGA compatible controller: S3 Inc.86C270-294 Savage/IX-MV (rev 11)
Subsystem: IBM ThinkPadT20/T22
Kernel driver in use: savagefbKod: Zaznacz cały
Using system configdirectory /usr/share/X11/xorg.conf.d
error setting MTRR (base=0xf2000000, size=0x05000000, type=1) Invalid argument (22)
[10e] 320 x200, 70Hz
[111] 640 x 480, 60Hz, 72Hz, 75Hz, 85Hz, 100Hz
[114] 800 x 600, 60Hz, 72Hz, 75Hz, 85Hz, 100Hz
[117] 1024 x 768, 60Hz, 70Hz, 75Hz, 85Hz, 43Hz, 100Hz
[11a] 1280 x 1024, 60Hz, 75Hz, 85Hz, 43Hz
[11d] 640 x 400, 70Hz
[122] 1600 x 1200, 48Hz, 60Hz, 75Hz, 85Hz
[133] 320 x 240, 72Hz
[13c] 1400 x 1050, 60Hz, 75Hz
[143] 400 x 300, 72Hz
[153] 512 x 384, 70Hz
[173] 720 x 480, 75Hz
[178] 720 x 576, 75Hz
SELinux: Disabled on system, not enabling in Xserver
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp ale not fatal to the X server
waiting for X server to shut down error setting MTRR (base = 0xf0000000, size=0x00800000, type = 1) Invakud argument (22)
error setting MTRR (base = 0xf2000000, size = 0x05000000, type = 1) Invalid argument (22)Kod: Zaznacz cały
end_request: I/0 error, dev fd0, sector 0
Buffer I/0 error on device fd0, logical block 0Co to za błąd?
Kod: Zaznacz cały
Error setting MTRR