- Polskie Forum Użytkowników Debiana

daw!d · Post autor: **daw!d** » 09 listopada 2012, 12:29

Witam.
Mam kolejny problem z Debianem. Zainstalowałem środowisko graficzne LXDE, xorg też zainstalowany. GRUB chyba normalnie działa, ostatnie jego polecenie jakie widzę to

Kod: Zaznacz cały

Starting Gnome Display Manager: GDM

i po tym pojawia się czarny ekran. Nic wtedy nie da się zrobić, nie da przełączyć się między konsolami, pozostaje jedynie zrestartowanie komputera. Najśmieszniejsze jest to, że niekiedy środowisko graficzne uruchamia się prawidłowo, choć ostatnio coś już nie chce.

Kod: Zaznacz cały

uname -a
Linux debian 2.6.32-5-686 #1 SMP Sun Sep 23 09:49:36 UTC 2012 i686 GNU/Linux

Kod: Zaznacz cały

root@debian:~#dpkg --print-architecture
i386

Kod: Zaznacz cały

/var/log/Xorg.0.log

http://wklej.se/Xorg.0.log

Kod: Zaznacz cały

lspci-k
00:00.0Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Hostbridge (rev 03)
    Kernel driver in use: agpgart-intel
00:01.0PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge(rev 03)
00:02.0 CardBus bridge: Texas Instruments PCI1450 (rev03)
    Subsystem: IBM ThinkPad 600X/A21m/T20/T22
    Kernel driverin use: yenta_cardbus
00:02.1 CardBus bridge: Texas InstrumentsPCI1450 (rev 03)
    Subsystem: IBM ThinkPad600X/A21m/T20/T22
    Kernel driver in use: yenta_cardbus
00:03.0Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100(rev 09)
    Subsystem: Intel Corporation EtherExpress PRO/100+MiniPCI
    Kernel driver in use: e100
00:03.1 Serial controller:Xircom Mini-PCI V.90 56k Modem
    Subsystem: Intel CorporationDevice 2408
    Kernel driver in use: serial
00:05.0 Multimediaaudio controller: Cirrus Logic CS 4614/22/24/30 [CrystalClearSoundFusion Audio Accelerator] (rev 01)
    Subsystem: IBM ThinkPad600X/A20m
00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4ISA (rev 02)
00:07.1 IDE interface: Intel Corporation82371AB/EB/MB PIIX4 IDE (rev 01)
    Kernel driver in use:ata_piix
00:07.2 USB Controller: Intel Corporation 82371AB/EB/MBPIIX4 USB (rev 01)
    Kernel driver in use: uhci_hcd
00:07.3Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03)
01:00.0VGA compatible controller: S3 Inc. 86C270-294 Savage/IX-MV (rev11)
Subsystem: IBM ThinkPad T20/T22

Kod: Zaznacz cały

lspci-n
00:00.00600: 8086:7190 (rev 03)
00:01.0 0604: 8086:7191 (rev 03)
00:02.00607: 104c:ac1b (rev 03)
00:02.1 0607: 104c:ac1b (rev 03)
00:03.00200: 8086:1229 (rev 09)
00:03.1 0700: 115d:000c
00:05.0 0401:1013:6003 (rev 01)
00:07.0 0680: 8086:7110 (rev 02)
00:07.10101: 8086:7111 (rev 01)
00:07.2 0c03: 8086:7112 (rev 01)
00:07.30680: 8086:7113 (rev 03)
01:00.0 0300: 5333:8c12 (rev 11)

Reinstalowałem xorg, LXDE, próbowałem też zainstalować sterowniki do karty wg tego sposobu -> http://forum.dobreprogramy.pl/bledy-prz ... 22105.html ale nie wychodzi

Kod: Zaznacz cały

/pen# sh 4033-Savage_4.0.4_binary
4033-Savage_4.0.3_binary: 1: Syntax error: "(" unexpected

Z tego co zauważyłem w /var/log/Xorg.0.log to system chyba męczy się z ustawieniem rozdzielczości i z częstotliwością odświeżania, nie wiem czy tak ma być? Jak ustawić rozdzielczość monitora z konsoli?

Kod: Zaznacz cały

cat /etc/X11/xorg.conf
cat: /etc/X11/xorg.conf: No such file or directory
X -configure
Your xorg/conf file is /root/xorg.conf.new

Kod: Zaznacz cały

Cat /root/xorg.conf.new

Kod: Zaznacz cały

Section "ServerLayout"
    Identifier     "X.org Configured"
    Screen      0  "Screen0" 0 0
    InputDevice    "Mouse0" "CorePointer"
    InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
    ModulePath   "/usr/lib/xorg/modules"
    FontPath     "/usr/share/fonts/X11/misc"
    FontPath     "/usr/share/fonts/X11/cyrillic"
    FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
    FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
    FontPath     "/usr/share/fonts/X11/Type1"
    FontPath     "/usr/share/fonts/X11/100dpi"
    FontPath     "/usr/share/fonts/X11/75dpi"
    FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
    FontPath     "built-ins"
EndSection

Section "Module"
    Load  "glx"
    Load  "dri2"
    Load  "extmod"
    Load  "record"
    Load  "dbe"
    Load  "dri"
EndSection

Section "InputDevice"
    Identifier  "Keyboard0"
    Driver      "kbd"
EndSection

Section "InputDevice"
    Identifier  "Mouse0"
    Driver      "mouse"
    Option        "Protocol" "auto"
    Option        "Device" "/dev/input/mice"
    Option        "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
    Identifier   "Monitor0"
    VendorName   "Monitor Vendor"
    ModelName    "Monitor Model"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"                # [<bool>]
        #Option     "AccelMethod"            # <str>
        #Option     "HWCursor"               # [<bool>]
        #Option     "SWCursor"               # [<bool>]
        #Option     "ShadowFB"               # [<bool>]
        #Option     "Rotate"                 # [<str>]
        #Option     "UseBIOS"                # [<bool>]
        #Option     "LCDClock"               # <freq>
        #Option     "ShadowStatus"           # [<bool>]
        #Option     "CrtOnly"                # [<bool>]
        #Option     "TvOn"                   # [<bool>]
        #Option     "PAL"                    # [<bool>]
        #Option     "ForceInit"              # [<bool>]
        #Option     "Overlay"                # [<str>]
        #Option     "TransparencyKey"        # [<str>]
        #Option     "ForceInit"              # [<bool>]
        #Option     "DisableXVMC"            # [<bool>]
        #Option     "DisableTile"            # [<bool>]
        #Option     "DisableCOB"             # [<bool>]
        #Option     "BCIforXv"               # [<bool>]
        #Option     "DVI"                    # [<bool>]
        #Option     "IgnoreEDID"             # [<bool>]
        #Option     "BusType"                # [<str>]
        #Option     "DmaType"                # [<str>]
        #Option     "DmaMode"                # [<str>]
        #Option     "AGPMode"                # <i>
        #Option     "AGPSize"                # <i>
        #Option     "DRI"                    # [<bool>]
        #Option     "AGPforXv"               # [<bool>]
    Identifier  "Card0"
    Driver      "savage"
    VendorName  "S3 Inc."
    BoardName   "86C270-294 Savage/IX-MV"
    BusID       "PCI:1:0:0"
EndSection

Section "Screen"
    Identifier "Screen0"
    Device     "Card0"
    Monitor    "Monitor0"
    SubSection "Display"
        Viewport   0 0
        Depth     1
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     4
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     8
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     15
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     16
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

Edycja:
Dobrze,, zainstalowałem sterowniki karty, przez modconf dodałem je do jądra. Rekonfigurowałem xorg, ale dalej to samo. Jedynie zmieniła się rozdzielczość ekranu.
Tutaj /var/log/Xorg.0.log
http://wklej.se/xorg12233123

Kod: Zaznacz cały

lspci -k 00:00.0 Host bridge: Intel Corporation440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
    Kernel driver inuse: agpgart-intel
00:01.0 PCI bridge: Intel Corporation440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
00:02.0 CardBusbridge: Texas Instruments PCI1450 (rev 03)
    Subsystem: IBMThinkPad 600X/A21m/T20/T22
    Kernel driver in use:yenta_cardbus
00:02.1 CardBus bridge: Texas Instruments PCI1450(rev 03)
    Subsystem: IBM ThinkPad 600X/A21m/T20/T22
    Kerneldriver in use: yenta_cardbus
00:03.0 Ethernet controller: IntelCorporation 82557/8/9/0/1 Ethernet Pro 100 (rev 09)
    Subsystem:Intel Corporation EtherExpress PRO/100+ MiniPCI
    Kernel driver inuse: e100
00:03.1 Serial controller: Xircom Mini-PCI V.90 56kModem
    Subsystem: Intel Corporation Device 2408
    Kernel driverin use: serial
00:05.0 Multimedia audio controller: Cirrus LogicCS 4614/22/24/30 [CrystalClear SoundFusion Audio Accelerator] (rev01)
    Subsystem: IBM ThinkPad 600X/A20m
00:07.0 Bridge: IntelCorporation 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDEinterface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
    Kerneldriver in use: ata_piix
00:07.2 USB Controller: Intel Corporation82371AB/EB/MB PIIX4 USB (rev 01)
    Kernel driver in use:uhci_hcd
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4ACPI (rev 03)
01:00.0 VGA compatible controller: S3 Inc.86C270-294 Savage/IX-MV (rev 11)
    Subsystem: IBM ThinkPadT20/T22
Kernel driver in use: savagefb

Po wpisaniu startx przechodzi do środowiska graficznego, a po wylogowaniu w konsoli widać:

Kod: Zaznacz cały

Using system configdirectory /usr/share/X11/xorg.conf.d
error setting MTRR (base=0xf2000000, size=0x05000000, type=1) Invalid argument (22)
[10e] 320 x200, 70Hz
[111] 640 x 480, 60Hz, 72Hz, 75Hz, 85Hz, 100Hz
[114] 800 x 600, 60Hz, 72Hz, 75Hz, 85Hz, 100Hz
[117] 1024 x 768, 60Hz, 70Hz, 75Hz, 85Hz, 43Hz, 100Hz
[11a] 1280 x 1024,  60Hz, 75Hz, 85Hz, 43Hz 
[11d] 640 x 400, 70Hz
[122] 1600 x 1200, 48Hz, 60Hz, 75Hz, 85Hz
[133] 320 x 240, 72Hz
[13c] 1400 x 1050, 60Hz, 75Hz
[143] 400 x 300, 72Hz
[153] 512 x 384, 70Hz
[173] 720 x 480, 75Hz
[178] 720 x 576, 75Hz
SELinux: Disabled on system, not enabling in Xserver
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:           Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
 >                        Ignoring extra symbols
Errors from xkbcomp ale not fatal to the X server
 
waiting for X server to shut down error setting MTRR (base = 0xf0000000, size=0x00800000, type = 1) Invakud argument (22)
error setting MTRR (base = 0xf2000000, size = 0x05000000, type = 1) Invalid argument (22)

I zaczyna pojawiać się komenda

Kod: Zaznacz cały

end_request: I/0 error, dev fd0, sector 0
Buffer I/0 error on device fd0, logical block 0

I ciągle pojawia się nowa, że nie można nawet nic wpisać w konsolę.

Co to za błąd?

Kod: Zaznacz cały

Error setting MTRR

Proszę o pomoc

Post autor: **Yampress** » 10 listopada 2012, 13:20

Musisz chyba skopiować ten plik /root/xorg.conf.new do /etc/x11 i zmieinć jego nazwę na xorg.conf

daw!d · Post autor: **daw!d** » 10 listopada 2012, 13:48

Zrobiłem tak jak napisałeś, po restarcie załadowały się Xy. Ale jak wyłączyłem komputer i włączyłem znowu jest czarny ekran.

Zauważyłem, że jak zrestartuję komputer poleceniem:

Kod: Zaznacz cały

shutdown -r now

to xy się wczytają, ale jak wyłączę ponownie tym samy poleceniem to przy następnym włączeniu jest czarny ekran. I o co tu chodzi?

Post autor: **Yampress** » 10 listopada 2012, 15:51

Spróbuj usunąć z pomoca programu modconf ten sterownik.
Wedługg jakiego przepisu instalowałeś ten sterownik?

daw!d · Post autor: **daw!d** » 10 listopada 2012, 17:17

Nie mogę teraz znaleźć tej strony. Myślisz, że jest zły, albo źle zainstalowany? Nie da rady odinstalować tego sterownika bo jest używany...

Jeszcze dodałem plik rc.conf według tego sposobu:
https://bbs.archlinux.org/viewtopic.php?id=64039

I teraz ACPI się ładuje: http://wklej.se/xorglog1
ale za to:

Kod: Zaznacz cały

(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
 (WW) Disabling Mouse0
 (WW) Disabling Keyboard0

Nie wiem czy dobrze kombinuję, jak źle to mogę usunąć ten plik rc.conf.

Post autor: **Yampress** » 10 listopada 2012, 20:30

Czy Debian to Arch Linux?
NIE.
Tam pewne rzeczy inaczej się konfiguruje i tutaj inaczej. Tu plik rc.conf swojej mocy nie ma i nie jest używany do jakiejkolwiek konfiguracji.

daw!d · Post autor: **daw!d** » 11 listopada 2012, 13:23

Aha.
Dodałem do xorg.conf

Kod: Zaznacz cały

Section "ServerFlags"
Option "AllowEmptyInput" "no"
EndSection

teraz Xorg.0.log wygląda tak http://wklej.se/xorglog12345

Kod: Zaznacz cały

X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-5-amd64 i686 Debian
Current Operating System: Linux debian 2.6.32-5-686 #1 SMP Sun Sep 23 09:49:36 UTC 2012 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=34c75907-6607-4fc1-9e65-f4cab55004d4 ro quiet
Build Date: 30 October 2011  08:56:49PM
xorg-server 2:1.7.7-14 (Julien Cristau <jcristau@debian.org>)
Current version of pixman: 0.16.4
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 10 23:15:20 2012
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "AllowEmptyInput" "no"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
        /usr/share/fonts/X11/misc,
        /usr/share/fonts/X11/cyrillic,
        /usr/share/fonts/X11/100dpi/:unscaled,
        /usr/share/fonts/X11/75dpi/:unscaled,
        /usr/share/fonts/X11/Type1,
        /usr/share/fonts/X11/100dpi,
        /usr/share/fonts/X11/75dpi,
        /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
        built-ins,
        /usr/share/fonts/X11/misc,
        /usr/share/fonts/X11/cyrillic,
        /usr/share/fonts/X11/100dpi/:unscaled,
        /usr/share/fonts/X11/75dpi/:unscaled,
        /usr/share/fonts/X11/Type1,
        /usr/share/fonts/X11/100dpi,
        /usr/share/fonts/X11/75dpi,
        /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
        built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) Loader magic: 0x81ecce0
(II) Module ABI versions:
        X.Org ANSI C Emulation: 0.4
        X.Org Video Driver: 6.0
        X.Org XInput driver : 7.0
        X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:1:0:0) 5333:8c12:1014:017f S3 Inc. 86C270-294 Savage/IX-MV rev 17, Mem @ 0xf0000000/134217728, BIOS @ 0x????????/65536
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
        compiled for 1.7.7, module version = 1.0.0
        ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
        compiled for 1.7.7, module version = 1.1.0
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
        compiled for 1.7.7, module version = 1.13.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
        compiled for 1.7.7, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
        compiled for 1.7.7, module version = 1.0.0
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
        compiled for 1.7.7, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "savage"
(II) Loading /usr/lib/xorg/modules/drivers/savage_drv.so
(II) Module savage: vendor="X.Org Foundation"
        compiled for 1.7.6.901, module version = 2.3.1
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "mouse"
(WW) Warning, couldn't open module mouse
(II) UnloadModule: "mouse"
(EE) Failed to load module "mouse" (module does not exist, 0)
(II) LoadModule: "kbd"
(WW) Warning, couldn't open module kbd
(II) UnloadModule: "kbd"
(EE) Failed to load module "kbd" (module does not exist, 0)
(II) SAVAGE: driver (version 2.3.1) for S3 Savage chipsets: Savage4,
        Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX,
        Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133,
        Twister PN133, Twister KN133, SuperSavage/MX 128, SuperSavage/MX 64,
        SuperSavage/MX 64C, SuperSavage/IX 128, SuperSavage/IX 128,
        SuperSavage/IX 64, SuperSavage/IX 64, SuperSavage/IXC 64,
        SuperSavage/IXC 64, ProSavage DDR, ProSavage DDR-K
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
        compiled for 1.7.7, module version = 0.1.0
        ABI class: X.Org Video Driver, version 6.0
(==) SAVAGE(0): Depth 16, (--) framebuffer bpp 16
(==) SAVAGE(0): RGB weight 565
(==) SAVAGE(0): Default visual is TrueColor
(II) SAVAGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) SAVAGE(0): Using XAA acceleration architecture
(==) SAVAGE(0): Using HW cursor
(==) SAVAGE(0): Using video BIOS to set modes
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
        compiled for 1.7.7, module version = 1.1.0
        ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
        compiled for 1.7.7, module version = 1.0.0
        ABI class: X.Org Video Driver, version 6.0
(II) SAVAGE(0): initializing int10
(II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
(II) SAVAGE(0): VESA BIOS detected
(II) SAVAGE(0): VESA VBE Version 2.0
(II) SAVAGE(0): VESA VBE Total Mem: 8192 kB
(II) SAVAGE(0): VESA VBE OEM: S3 Incorporated. M7 BIOS
(II) SAVAGE(0): VESA VBE OEM Software Rev: 1.0
(II) SAVAGE(0): VESA VBE OEM Vendor: S3 Incorporated.
(II) SAVAGE(0): VESA VBE OEM Product: VBE 2.0
(II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 1.1
(--) SAVAGE(0): Chip: id 8c12, "Savage/IX-MV"
(--) SAVAGE(0): Engine: "MobileSavage"
(--) SAVAGE(0): AGP card detected
(==) SAVAGE(0): Using AGP DMA
(II) SAVAGE(0): Savage3D/MX/IX does not support command DMA.
(==) SAVAGE(0): Will try only vertex DMA mode
(==) SAVAGE(0): Using AGP 1x mode
(==) SAVAGE(0): Using 16 MB AGP aperture
(==) SAVAGE(0): Using gamma correction (1.0, 1.0, 1.0)
(--) SAVAGE(0): probed videoram:  8192k
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(--) SAVAGE(0): No DDC signal
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) SAVAGE(0): I2C bus "I2C bus" initialized.
(II) SAVAGE(0): I2C device "I2C bus:ddc2" registered at address 0xA0.
(--) SAVAGE(0): Detected current MCLK value of 83.045 MHz
(--) SAVAGE(0): 1024x768 TFT LCD panel detected and active
(--) SAVAGE(0): - Limiting video mode to 1024x768
(--) SAVAGE(0): Found 13 modes at this depth:
    [10e] 320 x 200, 70Hz
    [111] 640 x 480, 60Hz, 72Hz, 75Hz, 85Hz, 100Hz
    [114] 800 x 600, 60Hz, 72Hz, 75Hz, 85Hz, 100Hz
    [117] 1024 x 768, 60Hz, 70Hz, 75Hz, 85Hz, 43Hz, 100Hz
    [11a] 1280 x 1024, 60Hz, 75Hz, 85Hz, 43Hz
    [11d] 640 x 400, 70Hz
    [122] 1600 x 1200, 48Hz, 60Hz, 75Hz, 85Hz
    [133] 320 x 240, 72Hz
    [13c] 1400 x 1050, 60Hz, 75Hz
    [143] 400 x 300, 72Hz
    [153] 512 x 384, 70Hz
    [173] 720 x 480, 75Hz
    [178] 720 x 576, 75Hz
(II) SAVAGE(0): Monitor0: Using hsync range of 31.50-47.82 kHz
(II) SAVAGE(0): Monitor0: Using vrefresh range of 56.00-59.92 Hz
(II) SAVAGE(0): Monitor0: Using maximum pixel clock of 63.50 MHz
(II) SAVAGE(0): Estimated virtual size for aspect ratio 1.3333 is 1024x768
(II) SAVAGE(0): Clock range:  10.00 to 250.00 MHz
(--) SAVAGE(0): Chose mode 117 at 60Hz.
(II) SAVAGE(0): Not using mode "1024x768_60.00" (mode clock too high)
(--) SAVAGE(0): No suitable BIOS mode found for 640x350 85Hz.
(II) SAVAGE(0): Not using default mode "640x350" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 320x175 85Hz.
(II) SAVAGE(0): Not using default mode "320x175" (no mode of this name)
(--) SAVAGE(0): Chose mode 11d at 70Hz.
(II) SAVAGE(0): Not using default mode "640x400" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 10e at 70Hz.
(II) SAVAGE(0): Not using default mode "320x200" (vrefresh out of range)
(--) SAVAGE(0): No suitable BIOS mode found for 720x400 85Hz.
(II) SAVAGE(0): Not using default mode "720x400" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 360x200 85Hz.
(II) SAVAGE(0): Not using default mode "360x200" (no mode of this name)
(--) SAVAGE(0): Chose mode 111 at
 60Hz.
(--) SAVAGE(0): Chose mode 133 at 72Hz.
(--) SAVAGE(0): Chose mode 111 at 72Hz.
(II) SAVAGE(0): Not using default mode "640x480" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 133 at 72Hz.
(II) SAVAGE(0): Not using default mode "320x240" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 111 at 75Hz.
(II) SAVAGE(0): Not using default mode "640x480" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 133 at 72Hz.
(II) SAVAGE(0): Not using default mode "320x240" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 111 at 85Hz.
(II) SAVAGE(0): Not using default mode "640x480" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 133 at 72Hz.
(II) SAVAGE(0): Not using default mode "320x240" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 114 at 60Hz.
(--) SAVAGE(0): Chose mode 143 at 72Hz.
(--) SAVAGE(0): Chose mode 114 at 60Hz.
(--) SAVAGE(0): Chose mode 143 at 72Hz.
(--) SAVAGE(0): Chose mode 114 at 72Hz.
(II) SAVAGE(0): Not using default mode "800x600" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 143 at 72Hz.
(II) SAVAGE(0): Not using default mode "400x300" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 114 at 75Hz.
(II) SAVAGE(0): Not using default mode "800x600" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 143 at 72Hz.
(II) SAVAGE(0): Not using default mode "400x300" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 114 at 85Hz.
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(--) SAVAGE(0): Chose mode 143 at 72Hz.
(II) SAVAGE(0): Not using default mode "400x300" (hsync out of range)
(--) SAVAGE(0): Chose mode 117 at 85Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 153 at 70Hz.
(II) SAVAGE(0): Not using default mode "512x384" (vrefresh out of range)
(--) SAVAGE(0): Chose mode 117 at 60Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(--) SAVAGE(0): Chose mode 153 at 70Hz.
(II) SAVAGE(0): Not using default mode "512x384" (hsync out of range)
(--) SAVAGE(0): Chose mode 117 at 70Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(--) SAVAGE(0): Chose mode 153 at 70Hz.
(II) SAVAGE(0): Not using default mode "512x384" (hsync out of range)
(--) SAVAGE(0): Chose mode 117 at 75Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(--) SAVAGE(0): Chose mode 153 at 70Hz.
(II) SAVAGE(0): Not using default mode "512x384" (hsync out of range)
(--) SAVAGE(0): Chose mode 117 at 85Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(--) SAVAGE(0): Chose mode 153 at 70Hz.
(II) SAVAGE(0): Not using default mode "512x384" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1152x864" (width too large for virtual size)
(--) SAVAGE(0): No suitable BIOS mode found for 576x432 75Hz.
(II) SAVAGE(0): Not using default mode "576x432" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1280x960" (width too large for virtual size)
(--) SAVAGE(0): Chose mode 111 at 60Hz.
(II) SAVAGE(0): Not using default mode "640x480" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1280x960" (width too large for virtual size)
(--) SAVAGE(0): Chose mode 111 at 85Hz.
(II) SAVAGE(0): Not using default mode "640x480" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1280x1024" (width too large for virtual size)
(--) SAVAGE(0): No suitable BIOS mode found for 640x512 60Hz.
(II) SAVAGE(0): Not using default mode "640x512" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1280x1024" (width too large for virtual size)
(--) SAVAGE(0): No suitable BIOS mode found for 640x512 75Hz.
(II) SAVAGE(0): Not using default mode "640x512" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1280x1024" (width too large for virtual size)
(--) SAVAGE(0): No suitable BIOS mode found for 640x512 85Hz.
(II) SAVAGE(0): Not using default mode "640x512" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1600x1200" (width too large for virtual size)
(--) SAVAGE(0): Chose mode 114 at 60Hz.
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (width too large for virtual size)
(--) SAVAGE(0): Chose mode 114 at 60Hz.
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (width too large for virtual size)
(--) SAVAGE(0): Chose mode 114 at 72Hz.
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (width too large for virtual size)
(--) SAVAGE(0): Chose mode 114 at 75Hz.
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (width too large for virtual size)
(--) SAVAGE(0): Chose mode 114 at 85Hz.
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1792x1344" (width too large for virtual size)
(--) SAVAGE(0): No suitable BIOS mode found for 896x672 60Hz.
(II) SAVAGE(0): Not using default mode "896x672" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1792x1344" (width too large for virtual size)
(--) SAVAGE(0): No suitable BIOS mode found for 896x672 75Hz.
(II) SAVAGE(0): Not using default mode "896x672" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1856x1392" (width too large for virtual size)
(--) SAVAGE(0): No suitable BIOS mode found for 928x696 60Hz.
(II) SAVAGE(0): Not using default mode "928x696" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1856x1392" (width too large for virtual size)
(--) SAVAGE(0): No suitable BIOS mode found for 928x696 75Hz.
(II) SAVAGE(0): Not using default mode "928x696" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1920x1440" (width too large for virtual size)
(--) SAVAGE(0): No suitable BIOS mode found for 960x720 60Hz.
(II) SAVAGE(0): Not using default mode "960x720" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1920x1440" (width too large for virtual size)
(--) SAVAGE(0): No suitable BIOS mode found for 960x720 75Hz.
(II) SAVAGE(0): Not using default mode "960x720" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 832x624 74Hz.
(II) SAVAGE(0): Not using default mode "832x624" (no mode of this name)
(--) SAVAGE(0): No suitable BIOS mode found for 416x312 74Hz.
(II) SAVAGE(0): Not using default mode "416x312" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1152x864" (width too large for virtual size)
(--) SAVAGE(0): No suitable BIOS mode found for 576x432 60Hz.
(II) SAVAGE(0): Not using default mode "576x432" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1152x864" (width too large for virtual size)
(--) SAVAGE(0): No suitable BIOS mode found for 576x432 70Hz.
(II) SAVAGE(0): Not using default mode "576x432" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1152x864" (width too large for virtual size)
(--) SAVAGE(0): No suitable BIOS mode found for 576x432 74Hz.
(II) SAVAGE(0): Not using default mode "576x432" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1152x864" (width too large for virtual size)
(--) SAVAGE(0): No suitable BIOS mode found for 576x432 85Hz.
(II) SAVAGE(0): Not using default mode "576x432" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1152x864" (width too large for virtual size)
(--) SAVAGE(0): No suitable BIOS mode found for 576x432 85Hz.
(II) SAVAGE(0): Not using default mode "576x432" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1152x864" (width too large for virtual size)
(--) SAVAGE(0): No suitable BIOS mode found for 576x432 100Hz.
(II) SAVAGE(0): Not using default mode "576x432" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1360x768" (width too large for virtual size)
(--) SAVAGE(0): No suitable BIOS mode found for 680x384 59Hz.
(II) SAVAGE(0): Not using default mode "680x384" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1360x768" (width too large for virtual size)
(--) SAVAGE(0): No suitable BIOS mode found for 680x384 59Hz.
(II) SAVAGE(0): Not using default mode "680x384" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1400x1050" (width too large for virtual size)
(--) SAVAGE(0): No suitable BIOS mode found for 700x525 59Hz.
(II) SAVAGE(0): Not using default mode "700x525" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1400x1050" (width too large for virtual size)
(--) SAVAGE(0): No suitable BIOS mode found for 700x525 70Hz.
(II) SAVAGE(0): Not using default mode "700x525" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1400x1050" (width too large for virtual size)
(--) SAVAGE(0): No suitable BIOS mode found for 700x525 74Hz.
(II) SAVAGE(0): Not using default mode "700x525" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1400x1050" (width too large for virtual size)
(--) SAVAGE(0): No suitable BIOS mode found for 700x525 85Hz.
(II) SAVAGE(0): Not using default mode "700x525" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1440x900" (width too large for virtual size)
(--) SAVAGE(0): No suitable BIOS mode found for 720x450 59Hz.
(II) SAVAGE(0): Not using default mode "720x450" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1600x1024" (width too large for virtual size)
(--) SAVAGE(0): No suitable BIOS mode found for 800x512 60Hz.
(II) SAVAGE(0): Not using default mode "800x512" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1680x1050" (width too large for virtual size)
(--) SAVAGE(0): No suitable BIOS mode found for 840x525 59Hz.
(II) SAVAGE(0): Not using default mode "840x525" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1680x1050" (width too large for virtual size)
(--) SAVAGE(0): No
 suitable BIOS mode found for 840x525 60Hz.
(II) SAVAGE(0): Not using default mode "840x525" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1680x1050" (width too large for virtual size)
(--) SAVAGE(0): No suitable BIOS mode found for 840x525 69Hz.
(II) SAVAGE(0): Not using default mode "840x525" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1680x1050" (width too large for virtual size)
(--) SAVAGE(0): No suitable BIOS mode found for 840x525 74Hz.
(II) SAVAGE(0): Not using default mode "840x525" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1680x1050" (width too large for virtual size)
(--) SAVAGE(0): No suitable BIOS mode found for 840x525 85Hz.
(II) SAVAGE(0): Not using default mode "840x525" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1920x1080" (width too large for virtual size)
(--) SAVAGE(0): No suitable BIOS mode found for 960x540 59Hz.
(II) SAVAGE(0): Not using default mode "960x540" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1920x1200" (width too large for virtual size)
(--) SAVAGE(0): No suitable BIOS mode found for 960x600 59Hz.
(II) SAVAGE(0): Not using default mode "960x600" (no mode of this name)
(II) SAVAGE(0): Not using default mode "1920x1440" (width too large for virtual size)
(--) SAVAGE(0): No suitable BIOS mode found for 960x720 85Hz.
(II) SAVAGE(0): Not using default mode "960x720" (no mode of this name)
(II) SAVAGE(0): Not using default mode "2048x1536" (width too large for virtual size)
(--) SAVAGE(0): Chose mode 117 at 60Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(II) SAVAGE(0): Not using default mode "2048x1536" (width too large for virtual size)
(--) SAVAGE(0): Chose mode 117 at 75Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(II) SAVAGE(0): Not using default mode "2048x1536" (width too large for virtual size)
(--) SAVAGE(0): Chose mode 117 at 85Hz.
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(--) SAVAGE(0): Chose mode 117 at 60Hz.
(--) SAVAGE(0): Chose mode 117 at 60Hz.
(--) SAVAGE(0): Chose mode 114 at 60Hz.
(--) SAVAGE(0): Chose mode 114 at 60Hz.
(--) SAVAGE(0): Chose mode 111 at 60Hz.
(--) SAVAGE(0): Chose mode 143 at 72Hz.
(--) SAVAGE(0): Chose mode 143 at 72Hz.
(--) SAVAGE(0): Chose mode 133 at 72Hz.
(--) SAVAGE(0): Virtual size is 1024x768 (pitch 1024)
(**) SAVAGE(0): *Driver mode "1024x768": 56.0 MHz, 47.3 kHz, 59.9 Hz
(II) SAVAGE(0): Modeline "1024x768"x59.9   56.00  1024 1072 1104 1184  768 771 775 790 +hsync -vsync (47.3 kHz)
(**) SAVAGE(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) SAVAGE(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(**) SAVAGE(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) SAVAGE(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(**) SAVAGE(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) SAVAGE(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(**) SAVAGE(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
(II) SAVAGE(0): Modeline "400x300"x60.3   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz)
(**) SAVAGE(0): *Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
(II) SAVAGE(0): Modeline "400x300"x56.3   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz)
(**) SAVAGE(0): *Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(II) SAVAGE(0): Modeline "320x240"x60.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz)
(==) SAVAGE(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
        compiled for 1.7.7, module version = 1.0.0
        ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
        compiled for 1.7.7, module version = 1.2.1
        ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) SAVAGE(0): initializing int10
(II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
(II) SAVAGE(0): VESA BIOS detected
(II) SAVAGE(0): VESA VBE Version 2.0
(II) SAVAGE(0): VESA VBE Total Mem: 8192 kB
(II) SAVAGE(0): VESA VBE OEM: S3 Incorporated. M7 BIOS
(II) SAVAGE(0): VESA VBE OEM Software Rev: 1.0
(II) SAVAGE(0): VESA VBE OEM Vendor: S3 Incorporated.
(II) SAVAGE(0): VESA VBE OEM Product: VBE 2.0
(II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 1.1
(II) SAVAGE(0): 4740 kB of Videoram needed for 3D; 8192 kB of Videoram available
(II) SAVAGE(0): Sufficient Videoram available for 3D
(II) SAVAGE(0): [drm] bpp: 16 depth: 16
(II) SAVAGE(0): [drm] Sarea 2200+284: 2484
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] loaded kernel module for "savage" driver.
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) SAVAGE(0): [drm] Using the DRM lock SAREA also for drawables.
(II) SAVAGE(0): [drm] framebuffer handle = 0xf0000000
(II) SAVAGE(0): [drm] added 1 reserved context for kernel
(II) SAVAGE(0): X context handle = 0x1
(II) SAVAGE(0): [drm] installed DRM signal handler
(II) SAVAGE(0): [agp] Mode 0x1f000201 [AGP 0x8086/0x7190; Card 0x5333/0x8c12]
(II) SAVAGE(0): [agp] 16384 kB allocated with handle 0x00000001
(II) SAVAGE(0): [agp] DMA buffers handle = 0xf8000000
(II) SAVAGE(0): [agp] agpTextures handle = 0xf8200000
(II) SAVAGE(0): [drm] aperture handle = 0xf0000000
(II) SAVAGE(0): [drm] Enabling ShadowStatus for DRI.
(II) SAVAGE(0): [drm] Status handle = 0x0ef9b000
(II) SAVAGE(0): [drm] Status page mapped at 0xb184f000
(II) SAVAGE(0): [drm] Added 32 65536 byte DMA buffers
(II) SAVAGE(0): [dri] visual configs initialized
(**) SAVAGE(0): DRI is enabled
(--) SAVAGE(0): Chose mode 117 at 60Hz.
(II) SAVAGE(0): virtualX:1024,virtualY:768
(II) SAVAGE(0): bpp:16,tiledwidthBytes:2048,tiledBufferSize:1572864
(II) SAVAGE(0): bpp:16,widthBytes:2048,BufferSize:1572864
(II) SAVAGE(0): videoRambytes:0x00800000
(II) SAVAGE(0): textureSize:0x0015f000
(II) SAVAGE(0): textureSize:0x0015f000
(II) SAVAGE(0): textureOffset:0x00680000
(II) SAVAGE(0): depthOffset:0x00500000,depthPitch:2048
(II) SAVAGE(0): backOffset:0x00380000,backPitch:2048
(II) SAVAGE(0): Reserved back buffer at offset 0x380000
(II) SAVAGE(0): Reserved depth buffer at offset 0x500000
(II) SAVAGE(0): Reserved 1404 kb for textures at offset 0x680000
(II) SAVAGE(0): Using 1023 lines for offscreen memory.
(II) SAVAGE(0): Using XFree86 Acceleration Architecture (XAA)
        Screen to screen bit blits
        Solid filled rectangles
        8x8 mono pattern filled rectangles
        Indirect CPU to Screen color expansion
        Solid Lines
        Image Writes
        Setting up tile and stipple cache:
                28 128x128 slots
                7 256x256 slots
(==) SAVAGE(0): Backing store disabled
(==) SAVAGE(0): DPMS enabled
(II) SAVAGE(0): [DRI] installation complete
(II) SAVAGE(0): [junkers]pSAVAGEDRIServer:
(II) SAVAGE(0): [junkers]       reserved_map_agpstart:0x00000000
(II) SAVAGE(0): [junkers]       reserved_map_idx:0x00000000
(II) SAVAGE(0): [junkers]       sarea_priv_offset:0x00000000
(II) SAVAGE(0): [junkers]       chipset:0x00000000
(II) SAVAGE(0): [junkers]       sgram:0x00000000
(II) SAVAGE(0): [junkers]       frontbufferSize:0x00180000
(II) SAVAGE(0): [junkers]       frontOffset:0x00000000
(II) SAVAGE(0): [junkers]       frontPitch:0x00000800
(II) SAVAGE(0): [junkers]       backbufferSize:0x00180000
(II) SAVAGE(0): [junkers]       backOffset:0x00380000
(II) SAVAGE(0): [junkers]       backPitch:0x00000800
(II) SAVAGE(0): [junkers]       depthbufferSize:0x00180000
(II) SAVAGE(0): [junkers]       depthOffset:0x00500000
(II) SAVAGE(0): [junkers]       depthPitch:0x00000800
(II) SAVAGE(0): [junkers]       textureOffset:0x00680000
(II) SAVAGE(0): [junkers]       textureSize:0x0015f000
(II) SAVAGE(0): [junkers]       textureSize:0x0015f000
(II) SAVAGE(0): [junkers]       logTextureGranularity:0x00000000
(II) SAVAGE(0): [junkers]       agp:handle:0x00000001
(II) SAVAGE(0): [junkers]       agp :o ffset:0x01000000
(II) SAVAGE(0): [junkers]       agp:size:0x01000000
(II) SAVAGE(0): [junkers]       agp:map:0x00000000
(II) SAVAGE(0): [junkers]       registers:handle:0xf1000000
(II) SAVAGE(0): [junkers]       registers :o ffset:0x00000000
(II) SAVAGE(0): [junkers]       registers:size:0x00080000
(II) SAVAGE(0): [junkers]       registers:map:0x00000000
(II) SAVAGE(0): [junkers]       status:handle:0x0ef9b000
(II) SAVAGE(0): [junkers]       status :o ffset:0x00000000
(II) SAVAGE(0): [junkers]       status:size:0x00001000
(II) SAVAGE(0): [junkers]       status:map:0xb184f000
(II) SAVAGE(0): [junkers]       agpTextures:handle:0xf8200000
(II) SAVAGE(0): [junkers]       agpTextures :o ffset:0x00200000
(II) SAVAGE(0): [junkers]       agpTextures:size:0x00e00000
(II) SAVAGE(0): [junkers]       apgTextures:map:0x00000000
(II) SAVAGE(0): [junkers]       logAgpTextureGranularity:0x00000000
(II) SAVAGE(0): [junkers]       cmdDma:handle:0x00000000
(II) SAVAGE(0): [junkers]       cmdDma :o ffset:0x00000000
(II) SAVAGE(0): [junkers]       cmdDma:size:0x00000000
(II) SAVAGE(0): [junkers]       cmdDma:map:0x00000000
(II) SAVAGE(0): [junkers]pSAVAGEDRI:
(II) SAVAGE(0): [junkers]       chipset:0x00000002
(II) SAVAGE(0): [junkers]       width:0x00000400
(II) SAVAGE(0): [junkers]       height:0x00000300
(II) SAVAGE(0): [junkers]       mem:0x00800000
(II) SAVAGE(0): [junkers]       cpp:2
(II) SAVAGE(0): [junkers]       zpp:2
(II) SAVAGE(0): [junkers]       agpMode:1
(II) SAVAGE(0): [junkers]       bufferSize:65536
(II) SAVAGE(0): [junkers]       frontbufferSize:0x00180000
(II)
 SAVAGE(0): [junkers]   frontOffset:0x00000000
(II) SAVAGE(0): [junkers]       backbufferSize:0x00180000
(II) SAVAGE(0): [junkers]       backOffset:0x00380000
(II) SAVAGE(0): [junkers]       depthbufferSize:0x00180000
(II) SAVAGE(0): [junkers]       depthOffset:0x00500000
(II) SAVAGE(0): [junkers]       textureOffset:0x00680000
(II) SAVAGE(0): [junkers]       textureSize:0x00140000
(II) SAVAGE(0): [junkers]       logTextureGranularity:0x00000011
(II) SAVAGE(0): [junkers]       agpTextureHandle:0xf8200000
(II) SAVAGE(0): [junkers]       agpTextureSize:0x00e00000
(II) SAVAGE(0): [junkers]       logAgpTextureGranularity:0x00000014
(II) SAVAGE(0): [junkers]       apertureHandle:0xf0000000
(II) SAVAGE(0): [junkers]       apertureSize:0x05000000
(II) SAVAGE(0): [junkers]       aperturePitch:0x00002000
(II) SAVAGE(0): [junkers]       statusHandle:0x0ef9b000
(II) SAVAGE(0): [junkers]       statusSize:0x00001000
(II) SAVAGE(0): [junkers]       sarea_priv_offset:0x00000898
(II) SAVAGE(0): Direct rendering enabled
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: Loaded and initialized /usr/lib/dri/savage_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) LoadModule: "mouse"
(WW) Warning, couldn't open module mouse
(II) UnloadModule: "mouse"
(EE) Failed to load module "mouse" (module does not exist, 0)
(EE) No input driver matching `mouse'
(II) LoadModule: "kbd"
(WW) Warning, couldn't open module kbd
(II) UnloadModule: "kbd"
(EE) Failed to load module "kbd" (module does not exist, 0)
(EE) No input driver matching `kbd'
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
        compiled for 1.7.6.901, module version = 2.3.2
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) config/udev: Adding input device Video Bus (/dev/input/event6)
(**) Video Bus: Applying InputClass "evdev keyboard catchall"
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) config/udev: Adding input device Lid Switch (/dev/input/event1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Sleep Button (/dev/input/event2)
(**) Sleep Button: Applying InputClass "evdev keyboard catchall"
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event2"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event5)
(**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
(**) TPPS/2 IBM TrackPoint: always reports core events
(**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event5"
(II) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
(II) TPPS/2 IBM TrackPoint: Found relative axes
(II) TPPS/2 IBM TrackPoint: Found x and y relative axes
(II) TPPS/2 IBM TrackPoint: Configuring as mouse
(**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
(**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
(II) TPPS/2 IBM TrackPoint: initialized for relative axes.
(II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device PC Speaker (/dev/input/event4)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event7)
(**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
(**) ThinkPad Extra Buttons: always reports core events
(**) ThinkPad Extra Buttons: Device: "/dev/input/event7"
(II) ThinkPad Extra Buttons: Found keys
(II) ThinkPad Extra Buttons: Configuring as keyboard
(II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event8)
(**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
(**) ACPI Virtual Keyboard Device: always reports core events
(**) ACPI Virtual Keyboard Device: Device: "/dev/input/event8"
(II) ACPI Virtual Keyboard Device: Found keys
(II) ACPI Virtual Keyboard Device: Configuring as keyboard
(II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"

Jak te błędy usunąć?

Jeszcze zapomniałem dodać, że w grubie podczas ładowania wyświetla się:

Kod: Zaznacz cały

Waiting fot /dev to be fully populated...
IBM system detected: this module may corrupt your serial eeprom! Refusing to load module

Error: Driver 'pcspkr' is already registered,aborting
image download error

fnmirk · Post autor: **fnmirk** » 11 listopada 2012, 17:08

daw!d, zamykam temat do czasu aż przejrzysz odpowiedni temat w dziale dla początkujących. Nie ma sensu tłumaczyć kolejny już raz tego samego.
W jakim celu używasz pliku xorg.conf, przejrzyj:
http://debian.linux.pl/threads/5676-Prz ... -napiszesz!
http://debian.linux.pl/threads/441-X.Or ... 0#post2800
http://debian.linux.pl/threads/12771-Za ... #post81406
Jak zapoznasz się z opisem i zrozumiesz dlaczego należy przeszukać wcześniej forum, napisz do mnie to temat otworzę.

Środowisko graficzne nie zawsze się uruchamia, czarny ekran