Drukarka sieciowa, podłączona do sieci domowej (do routera) za pośrednictwem Wi-Fi.
Wszystko wskazuje na to, że po aktualizacji Wheezy do wersji 7.6, pojawił się błąd, identyczny błąd, znany mi z LMDE w wersji 201304 - drukarka działała, ale nie działał skaner.
Wyświetlane są identyczne komunikaty, jak w LMDE 201304 - obydwa w załączniku.
W tamtym czasie, próbowały rozgryźć ten temat Tęgie Głowy z Forum Mint, ale po wieelu przeróznych 'czarach" doszli do wnioslku, iż jest jakiś błąd w jądrze i nic z tym na obecną chwilę, nie da się zrobić - na kablu działało a barierą było pośrednictwo Wi-Fi.
W nowszej wersji LMDE 201404, ruszył w końcu skaner.
Panowie, co się dzieje z Debianem stable - to już druga niemiła niespodzianka, jaka mnie spotyka po aktualizacji do 7.6 (?)
HP C4780 - po aktualizacji Debiana do wersji 7.6, nie dzia
Na wstępie, bardzo Ci dziękuję, że zachciałeś mi pomóc.
Otóż, jeszcze w wersji 7.5 instalowałem za pomocą aplikacji "Drukowanie" poprzez 'dodaj drukarkę' i wszystko działało.
Obecnie w wersji 7.6, kiedy już nie chce skanować, usunąłem tę konfigurację i zainstalowałem za pomocą przeglądarki - http://localhost:631/
Niestety, ale poza zmieniona ikonką drukarki, NIC nie uległo zmianie i dalej jest to samo - uruchomienie 'prostego skanowania' kończy się zdjęcie z kamerki a 'xsane', komunikatem o błędzie (nieprawidłowy argument).
Podobnie, komunikatem o błędzie, kończy się kliknięcie 'właściwości' drukarki' (nie można zmienić wartości printer-resolution).
Przeglądałem swój wątek o takim samym problemie, z jakim się zetknąłem w LMDE (z 2013r) i wygląda to doprawdy na identyczny błąd - http://forum.linuxmint.pl/index.php?top ... 6#msg46396 - bowiem występują dokładnie te same objawy.
Teraz jestem poza domem, ale jak wrócę, to porównam efekty poleceń, tych sprzed roku (z LMDE) z obecnymi w Debian 7.6.
Otóż, jeszcze w wersji 7.5 instalowałem za pomocą aplikacji "Drukowanie" poprzez 'dodaj drukarkę' i wszystko działało.
Obecnie w wersji 7.6, kiedy już nie chce skanować, usunąłem tę konfigurację i zainstalowałem za pomocą przeglądarki - http://localhost:631/
Niestety, ale poza zmieniona ikonką drukarki, NIC nie uległo zmianie i dalej jest to samo - uruchomienie 'prostego skanowania' kończy się zdjęcie z kamerki a 'xsane', komunikatem o błędzie (nieprawidłowy argument).
Podobnie, komunikatem o błędzie, kończy się kliknięcie 'właściwości' drukarki' (nie można zmienić wartości printer-resolution).
Przeglądałem swój wątek o takim samym problemie, z jakim się zetknąłem w LMDE (z 2013r) i wygląda to doprawdy na identyczny błąd - http://forum.linuxmint.pl/index.php?top ... 6#msg46396 - bowiem występują dokładnie te same objawy.
Teraz jestem poza domem, ale jak wrócę, to porównam efekty poleceń, tych sprzed roku (z LMDE) z obecnymi w Debian 7.6.
Ja bym zaczął od tego:
Kod: Zaznacz cały
aptitude update
aptitude reinstall hplip hplip-data libsane-hpaio libhpmud0 libsnmp15Powyższe polecenia, nic nie zmieniły.
dmesg:
Ale gdzie tu jest jakaś mowa o drukarce/skanerze, tego nie wiem (nie mam pojęcia)
dmesg:
Kod: Zaznacz cały
[ 0.482793] mtrr: corrected configuration.
[ 0.483177] bio: create slab <bio-0> at 0
[ 0.483237] ACPI: Added _OSI(Module Device)
[ 0.483239] ACPI: Added _OSI(Processor Device)
[ 0.483240] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.483243] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.483696] ACPI: EC: Look up EC in DSDT
[ 0.486407] ACPI Warning: Incorrect checksum in table [TAMG] - 0xFD, should be 0xFC (20110623/tbutils-314)
[ 0.486886] ACPI: Interpreter enabled
[ 0.486890] ACPI: (supports S0 S3 S4 S5)
[ 0.486903] ACPI: Using IOAPIC for interrupt routing
[ 0.489274] ACPI: No dock devices found.
[ 0.489275] HEST: Table not found.
[ 0.489277] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.489314] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.489387] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.489388] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.489390] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.489391] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.489393] pci_root PNP0A03:00: host bridge window [mem 0xfed40000-0xfed44fff]
[ 0.489394] pci_root PNP0A03:00: host bridge window [mem 0xdfa00000-0xfebfffff]
[ 0.489402] pci 0000:00:00.0: [8086:0100] type 0 class 0x000600
[ 0.489429] pci 0000:00:02.0: [8086:0102] type 0 class 0x000300
[ 0.489437] pci 0000:00:02.0: reg 10: [mem 0xfb800000-0xfbbfffff 64bit]
[ 0.489442] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.489445] pci 0000:00:02.0: reg 20: [io 0xff00-0xff3f]
[ 0.489489] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[ 0.489510] pci 0000:00:16.0: reg 10: [mem 0xfbfff000-0xfbfff00f 64bit]
[ 0.489579] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.489609] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[ 0.489628] pci 0000:00:1a.0: reg 10: [mem 0xfbffe000-0xfbffe3ff]
[ 0.489712] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.489735] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[ 0.489748] pci 0000:00:1b.0: reg 10: [mem 0xfbff4000-0xfbff7fff 64bit]
[ 0.489811] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.489831] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[ 0.489904] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.489928] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
[ 0.490001] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.490031] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[ 0.490050] pci 0000:00:1d.0: reg 10: [mem 0xfbffd000-0xfbffd3ff]
[ 0.490134] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.490152] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.490209] pci 0000:00:1f.0: [8086:1c5c] type 0 class 0x000601
[ 0.490325] pci 0000:00:1f.2: [8086:1c02] type 0 class 0x000106
[ 0.490341] pci 0000:00:1f.2: reg 10: [io 0xfe00-0xfe07]
[ 0.490348] pci 0000:00:1f.2: reg 14: [io 0xfd00-0xfd03]
[ 0.490354] pci 0000:00:1f.2: reg 18: [io 0xfc00-0xfc07]
[ 0.490361] pci 0000:00:1f.2: reg 1c: [io 0xfb00-0xfb03]
[ 0.490367] pci 0000:00:1f.2: reg 20: [io 0xfa00-0xfa1f]
[ 0.490374] pci 0000:00:1f.2: reg 24: [mem 0xfbffc000-0xfbffc7ff]
[ 0.490414] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.490429] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[ 0.490442] pci 0000:00:1f.3: reg 10: [mem 0xfbffb000-0xfbffb0ff 64bit]
[ 0.490461] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
[ 0.490545] pci 0000:01:00.0: [10ec:8168] type 0 class 0x000200
[ 0.490563] pci 0000:01:00.0: reg 10: [io 0xee00-0xeeff]
[ 0.490595] pci 0000:01:00.0: reg 18: [mem 0xfbdff000-0xfbdfffff 64bit pref]
[ 0.490615] pci 0000:01:00.0: reg 20: [mem 0xfbdf8000-0xfbdfbfff 64bit pref]
[ 0.490703] pci 0000:01:00.0: supports D1 D2
[ 0.490704] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.494778] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.494783] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.494793] pci 0000:00:1c.0: bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref]
[ 0.494878] pci 0000:02:00.0: [1b73:1009] type 0 class 0x000c03
[ 0.494902] pci 0000:02:00.0: reg 10: [mem 0xfbee0000-0xfbeeffff 64bit]
[ 0.494921] pci 0000:02:00.0: reg 18: [mem 0xfbeff000-0xfbefffff 64bit]
[ 0.494940] pci 0000:02:00.0: reg 20: [mem 0xfbefe000-0xfbefefff 64bit]
[ 0.495018] pci 0000:02:00.0: supports D1
[ 0.495019] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.502746] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.502753] pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.502830] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.502850] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.502852] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.502854] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.502855] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.502857] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[ 0.502858] pci 0000:00:1e.0: bridge window [mem 0xdfa00000-0xfebfffff] (subtractive decode)
[ 0.502873] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.503015] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.503041] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.503088] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.503090] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.503091] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.507352] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.507384] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.507413] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[ 0.507443] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.507473] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.507503] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.507534] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[ 0.507563] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.507630] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.507635] vgaarb: loaded
[ 0.507636] vgaarb: bridge control possible 0000:00:02.0
[ 0.507662] PCI: Using ACPI for IRQ routing
[ 0.509119] PCI: pci_cache_line_size set to 64 bytes
[ 0.509160] reserve RAM buffer: 000000000009dc00 - 000000000009ffff
[ 0.509161] reserve RAM buffer: 00000000daf40000 - 00000000dbffffff
[ 0.509163] reserve RAM buffer: 000000011fe00000 - 000000011fffffff
[ 0.509234] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.509238] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.511245] Switching to clocksource hpet
[ 0.512459] pnp: PnP ACPI init
[ 0.512468] ACPI: bus type pnp registered
[ 0.512514] pnp 00:00: [bus 00-3f]
[ 0.512516] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.512517] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.512518] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.512521] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.512522] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.512524] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.512525] pnp 00:00: [mem 0xdfa00000-0xfebfffff window]
[ 0.512551] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.512607] pnp 00:01: [io 0x0010-0x001f]
[ 0.512608] pnp 00:01: [io 0x0022-0x003f]
[ 0.512609] pnp 00:01: [io 0x0044-0x004d]
[ 0.512610] pnp 00:01: [io 0x0050-0x005f]
[ 0.512611] pnp 00:01: [io 0x0062-0x0063]
[ 0.512612] pnp 00:01: [io 0x0065-0x006f]
[ 0.512614] pnp 00:01: [io 0x0074-0x007f]
[ 0.512615] pnp 00:01: [io 0x0091-0x0093]
[ 0.512616] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.512617] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.512618] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.512619] pnp 00:01: [io 0x0290-0x029f]
[ 0.512620] pnp 00:01: [io 0x0800-0x0805]
[ 0.512621] pnp 00:01: [io 0x0290-0x0294]
[ 0.512622] pnp 00:01: [io 0x0880-0x088f]
[ 0.512651] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.512653] system 00:01: [io 0x0290-0x029f] has been reserved
[ 0.512654] system 00:01: [io 0x0800-0x0805] has been reserved
[ 0.512656] system 00:01: [io 0x0290-0x0294] has been reserved
[ 0.512658] system 00:01: [io 0x0880-0x088f] has been reserved
[ 0.512660] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.512668] pnp 00:02: [dma 4]
[ 0.512669] pnp 00:02: [io 0x0000-0x000f]
[ 0.512670] pnp 00:02: [io 0x0080-0x0090]
[ 0.512671] pnp 00:02: [io 0x0094-0x009f]
[ 0.512672] pnp 00:02: [io 0x00c0-0x00df]
[ 0.512688] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.512721] pnp 00:03: [irq 0 disabled]
[ 0.512727] pnp 00:03: [irq 8]
[ 0.512728] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.512746] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.512763] pnp 00:04: [io 0x0070-0x0073]
[ 0.512781] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.512786] pnp 00:05: [io 0x0061]
[ 0.512805] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.512811] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.512815] pnp 00:06: [irq 13]
[ 0.512832] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.512919] pnp 00:07: [io 0x0400-0x04cf]
[ 0.512920] pnp 00:07: [io 0x04d2-0x04ff]
[ 0.512945] system 00:07: [io 0x0400-0x04cf] has been reserved
[ 0.512947] system 00:07: [io 0x04d2-0x04ff] has been reserved
[ 0.512949] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.512957] pnp 00:08: [io 0x1000-0x107f]
[ 0.512958] pnp 00:08: [io 0x1080-0x10ff]
[ 0.512959] pnp 00:08: [io 0x1100-0x117f]
[ 0.512960] pnp 00:08: [io 0x1180-0x11ff]
[ 0.512985] system 00:08: [io 0x1000-0x107f] has been reserved
[ 0.512986] system 00:08: [io 0x1080-0x10ff] has been reserved
[ 0.512988] system 00:08: [io 0x1100-0x117f] has been reserved
[ 0.512989] system 00:08: [io 0x1180-0x11ff] has been reserved
[ 0.512991] system 00:08: Plug and Play ACPI device, IDs ICD0001 PNP0c02 (active)
[ 0.513114] pnp 00:09: [io 0x0454-0x0457]
[ 0.513143] system 00:09: [io 0x0454-0x0457] has been reserved
[ 0.513145] system 00:09: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.513157] pnp 00:0a: [mem 0xf4000000-0xf7ffffff]
[ 0.513186] system 00:0a: [mem 0xf4000000-0xf7ffffff] has been reserved
[ 0.513188] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.513321] pnp 00:0b: [mem 0x000d0a00-0x000d3fff]
[ 0.513322] pnp 00:0b: [mem 0x000f0000-0x000f7fff]
[ 0.513323] pnp 00:0b: [mem 0x000f8000-0x000fbfff]
[ 0.513325] pnp 00:0b: [mem 0x000fc000-0x000fffff]
[ 0.513326] pnp 00:0b: [mem 0xdaf40000-0xdafbffff]
[ 0.513327] pnp 00:0b: [mem 0x00000000-0x0009ffff]
[ 0.513328] pnp 00:0b: [mem 0x00100000-0xdaf3ffff]
[ 0.513329] pnp 00:0b: [mem 0xdafc0000-0xdaffffff]
[ 0.513331] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
[ 0.513332] pnp 00:0b: [mem 0xfed10000-0xfed1dfff]
[ 0.513333] pnp 00:0b: [mem 0xfed20000-0xfed8ffff]
[ 0.513334] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
[ 0.513335] pnp 00:0b: [mem 0xffb00000-0xffb7ffff]
[ 0.513336] pnp 00:0b: [mem 0xfff00000-0xffffffff]
[ 0.513337] pnp 00:0b: [mem 0x000e0000-0x000effff]
[ 0.513339] pnp 00:0b: [mem 0x20000000-0x201fffff]
[ 0.513340] pnp 00:0b: [mem 0x40000000-0x400fffff]
[ 0.513341] pnp 00:0b: [mem 0xdb000000-0xdf9fffff]
[ 0.513376] system 00:0b: [mem 0x000d0a00-0x000d3fff] has been reserved
[ 0.513378] system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.513380] system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.513381] system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.513383] system 00:0b: [mem 0xdaf40000-0xdafbffff] could not be reserved
[ 0.513385] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.513386] system 00:0b: [mem 0x00100000-0xdaf3ffff] could not be reserved
[ 0.513388] system 00:0b: [mem 0xdafc0000-0xdaffffff] has been reserved
[ 0.513390] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.513391] system 00:0b: [mem 0xfed10000-0xfed1dfff] has been reserved
[ 0.513393] system 00:0b: [mem 0xfed20000-0xfed8ffff] could not be reserved
[ 0.513395] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.513397] system 00:0b: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.513398] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.513400] system 00:0b: [mem 0x000e0000-0x000effff] has been reserved
[ 0.513402] system 00:0b: [mem 0x20000000-0x201fffff] could not be reserved
[ 0.513404] system 00:0b: [mem 0x40000000-0x400fffff] could not be reserved
[ 0.513406] system 00:0b: [mem 0xdb000000-0xdf9fffff] could not be reserved
[ 0.513407] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.513419] pnp 00:0c: [mem 0xffb80000-0xffbfffff]
[ 0.513442] pnp 00:0c: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.513445] pnp: PnP ACPI: found 13 devices
[ 0.513446] ACPI: ACPI bus type pnp unregistered
[ 0.519337] PCI: max bus depth: 1 pci_try_num: 2
[ 0.519359] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.519361] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.519367] pci 0000:00:1c.0: bridge window [mem 0xfbd00000-0xfbdfffff 64bit pref]
[ 0.519373] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.519377] pci 0000:00:1c.1: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.519384] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[ 0.519406] pci 0000:00:1c.0: setting latency timer to 64
[ 0.519417] pci 0000:00:1c.1: setting latency timer to 64
[ 0.519423] pci 0000:00:1e.0: setting latency timer to 64
[ 0.519426] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.519427] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.519428] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.519430] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.519431] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.519432] pci_bus 0000:00: resource 9 [mem 0xdfa00000-0xfebfffff]
[ 0.519434] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.519435] pci_bus 0000:01: resource 2 [mem 0xfbd00000-0xfbdfffff 64bit pref]
[ 0.519437] pci_bus 0000:02: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 0.519438] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 0.519439] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 0.519440] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.519442] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.519443] pci_bus 0000:03: resource 8 [mem 0xfed40000-0xfed44fff]
[ 0.519444] pci_bus 0000:03: resource 9 [mem 0xdfa00000-0xfebfffff]
[ 0.519492] NET: Registered protocol family 2
[ 0.519578] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.520092] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.521118] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.521244] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.521246] TCP reno registered
[ 0.521251] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.521264] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.521352] NET: Registered protocol family 1
[ 0.521580] pci 0000:00:02.0: BIOS left Intel GPU interrupts enabled; disabling
[ 0.521679] pci 0000:00:02.0: Boot video device
[ 0.551193] PCI: CLS 4 bytes, default 64
[ 0.551238] Unpacking initramfs...
[ 0.698831] Freeing initrd memory: 10248k freed
[ 0.699760] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.699763] Placing 64MB software IO TLB between ffff8800d6f3e000 - ffff8800daf3e000
[ 0.699765] software IO TLB at phys 0xd6f3e000 - 0xdaf3e000
[ 0.700132] audit: initializing netlink socket (disabled)
[ 0.700139] type=2000 audit(1406988839.548:1): initialized
[ 0.710537] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.710944] VFS: Disk quotas dquot_6.5.2
[ 0.710964] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.711012] msgmni has been set to 7761
[ 0.711107] alg: No test for stdrng (krng)
[ 0.711127] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.711129] io scheduler noop registered
[ 0.711130] io scheduler deadline registered
[ 0.711143] io scheduler cfq registered (default)
[ 0.711283] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.711296] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.711297] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.711492] intel_idle: MWAIT substates: 0x1120
[ 0.711493] intel_idle: v0.4 model 0x2A
[ 0.711493] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.711514] ERST: Table is not found!
[ 0.711515] GHES: HEST is not enabled!
[ 0.711551] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.850408] Linux agpgart interface v0.103
[ 0.850452] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[ 0.850489] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 0.851091] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 0.851177] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 0.851256] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.884318] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?
[ 0.884320] i8042: If AUX port is really absent please use the 'i8042.noaux' option
[ 1.133301] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.133388] mousedev: PS/2 mouse device common for all mice
[ 1.133420] rtc_cmos 00:04: RTC can wake from S4
[ 1.133511] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.133536] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.133589] cpuidle: using governor ladder
[ 1.133647] cpuidle: using governor menu
[ 1.133763] TCP cubic registered
[ 1.133848] NET: Registered protocol family 10
[ 1.134232] Mobile IPv6
[ 1.134233] NET: Registered protocol family 17
[ 1.134236] Registering the dns_resolver key type
[ 1.134330] PM: Hibernation image not present or could not be loaded.
[ 1.134338] registered taskstats version 1
[ 1.134726] rtc_cmos 00:04: setting system clock to 2014-08-02 14:14:00 UTC (1406988840)
[ 1.134751] Initializing network drop monitor service
[ 1.135421] Freeing unused kernel memory: 580k freed
[ 1.135475] Write protecting the kernel read-only data: 6144k
[ 1.137072] Freeing unused kernel memory: 648k freed
[ 1.138679] Freeing unused kernel memory: 688k freed
[ 1.145844] udevd[56]: starting version 175
[ 1.160562] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.160622] r8169 0000:01:00.0: setting latency timer to 64
[ 1.160704] r8169 0000:01:00.0: irq 40 for MSI/MSI-X
[ 1.161067] r8169 0000:01:00.0: eth0: RTL8168evl/8111evl at 0xffffc9000061e000, 50:e5:49:49:14:5f, XID 0c900800 IRQ 40
[ 1.161070] r8169 0000:01:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.163443] usbcore: registered new interface driver usbfs
[ 1.163463] usbcore: registered new interface driver hub
[ 1.166755] usbcore: registered new device driver usb
[ 1.167266] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.167308] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.167312] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.167334] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.167360] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.168960] SCSI subsystem initialized
[ 1.169993] xhci_hcd 0000:02:00.0: setting latency timer to 64
[ 1.169997] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.170007] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[ 1.170466] xhci_hcd 0000:02:00.0: irq 41 for MSI/MSI-X
[ 1.170472] xhci_hcd 0000:02:00.0: irq 42 for MSI/MSI-X
[ 1.170478] xhci_hcd 0000:02:00.0: irq 43 for MSI/MSI-X
[ 1.170483] xhci_hcd 0000:02:00.0: irq 44 for MSI/MSI-X
[ 1.170489] xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
[ 1.170683] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.170686] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.170688] usb usb2: Product: xHCI Host Controller
[ 1.170689] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
[ 1.170691] usb usb2: SerialNumber: 0000:02:00.0
[ 1.170824] xHCI xhci_add_endpoint called for root hub
[ 1.170826] xHCI xhci_check_bandwidth called for root hub
[ 1.170854] hub 2-0:1.0: USB hub found
[ 1.170862] hub 2-0:1.0: 2 ports detected
[ 1.170924] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.170930] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
[ 1.170950] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.170952] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.170954] usb usb3: Product: xHCI Host Controller
[ 1.170955] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
[ 1.170957] usb usb3: SerialNumber: 0000:02:00.0
[ 1.171026] xHCI xhci_add_endpoint called for root hub
[ 1.171028] xHCI xhci_check_bandwidth called for root hub
[ 1.171054] hub 3-0:1.0: USB hub found
[ 1.171062] hub 3-0:1.0: 2 ports detected
[ 1.171245] ehci_hcd 0000:00:1a.0: cache line size of 4 is not supported
[ 1.171793] ehci_hcd 0000:00:1a.0: irq 18, io mem 0xfbffe000
[ 1.176546] libata version 3.00 loaded.
[ 1.185159] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.185195] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.185198] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.185200] usb usb1: Product: EHCI Host Controller
[ 1.185201] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 1.185203] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.185353] hub 1-0:1.0: USB hub found
[ 1.185358] hub 1-0:1.0: 2 ports detected
[ 1.185453] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.185456] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.185463] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 1.185483] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.189344] ehci_hcd 0000:00:1d.0: cache line size of 4 is not supported
[ 1.189362] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbffd000
[ 1.205001] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.205040] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.205043] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.205046] usb usb4: Product: EHCI Host Controller
[ 1.205049] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 1.205051] usb usb4: SerialNumber: 0000:00:1d.0
[ 1.205199] hub 4-0:1.0: USB hub found
[ 1.205203] hub 4-0:1.0: 2 ports detected
[ 1.205255] ahci 0000:00:1f.2: version 3.0
[ 1.205316] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
[ 1.205341] ahci: SSS flag set, parallel bus scan disabled
[ 1.220974] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x23 impl SATA mode
[ 1.220980] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems apst
[ 1.220986] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.237273] scsi0 : ahci
[ 1.237381] scsi1 : ahci
[ 1.237429] scsi2 : ahci
[ 1.237475] scsi3 : ahci
[ 1.237519] scsi4 : ahci
[ 1.237563] scsi5 : ahci
[ 1.237667] ata1: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc100 irq 46
[ 1.237669] ata2: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc180 irq 46
[ 1.237670] ata3: DUMMY
[ 1.237671] ata4: DUMMY
[ 1.237672] ata5: DUMMY
[ 1.237673] ata6: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc380 irq 46
[ 1.480107] usb 2-2: new full-speed USB device number 2 using xhci_hcd
[ 1.497171] usb 2-2: New USB device found, idVendor=0ac8, idProduct=305b
[ 1.497175] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.497178] usb 2-2: Product: PC Camera
[ 1.497180] usb 2-2: Manufacturer: Vimicro Corp.
[ 1.497343] usb 2-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.607693] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.695405] Refined TSC clocksource calibration: 3292.521 MHz.
[ 1.695411] Switching to clocksource tsc
[ 1.727304] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.739283] ata1.00: ATA-8: OCZ-VERTEX3, 2.15, max UDMA/133
[ 1.739288] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.739640] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.739644] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.739942] hub 1-1:1.0: USB hub found
[ 1.739972] hub 1-1:1.0: 4 ports detected
[ 1.749225] ata1.00: configured for UDMA/133
[ 1.749448] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX3 2.15 PQ: 0 ANSI: 5
[ 1.850905] usb 4-1: new high-speed USB device number 2 using ehci_hcd
[ 1.982847] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.982852] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.983163] hub 4-1:1.0: USB hub found
[ 1.983368] hub 4-1:1.0: 6 ports detected
[ 2.054367] usb 1-1.1: new full-speed USB device number 3 using ehci_hcd
[ 2.148772] usb 1-1.1: New USB device found, idVendor=09da, idProduct=8090
[ 2.148774] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.148776] usb 1-1.1: Product: USB Full Speed
[ 2.148777] usb 1-1.1: Manufacturer: A4Tech
[ 2.171735] input: A4Tech USB Full Speed as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input0
[ 2.171918] generic-usb 0003:09DA:8090.0001: input,hidraw0: USB HID v1.11 Mouse [A4Tech USB Full Speed] on usb-0000:00:1a.0-1.1/input0
[ 2.174064] input: A4Tech USB Full Speed as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input1
[ 2.174276] generic-usb 0003:09DA:8090.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [A4Tech USB Full Speed] on usb-0000:00:1a.0-1.1/input1
[ 2.174287] usbcore: registered new interface driver usbhid
[ 2.174288] usbhid: USB HID core driver
[ 2.217836] usb 1-1.2: new low-speed USB device number 4 using ehci_hcd
[ 2.237644] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.241524] ata2.00: ATAPI: TSSTcorp CDDVDW SN-208BB, SB01, max UDMA/100
[ 2.243987] ata2.00: configured for UDMA/100
[ 2.249877] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SN-208BB SB01 PQ: 0 ANSI: 5
[ 2.315396] usb 1-1.2: New USB device found, idVendor=1c4f, idProduct=0002
[ 2.315401] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.315404] usb 1-1.2: Product: USB Keykoard
[ 2.315406] usb 1-1.2: Manufacturer: SIGMACH1P
[ 2.318390] input: SIGMACH1P USB Keykoard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input2
[ 2.318483] generic-usb 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Keyboard [SIGMACH1P USB Keykoard] on usb-0000:00:1a.0-1.2/input0
[ 2.321264] input: SIGMACH1P USB Keykoard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input3
[ 2.321363] generic-usb 0003:1C4F:0002.0004: input,hidraw3: USB HID v1.10 Device [SIGMACH1P USB Keykoard] on usb-0000:00:1a.0-1.2/input1
[ 2.568571] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.572248] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 2.572313] sd 0:0:0:0: [sda] Write Protect is off
[ 2.572315] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.572333] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.573249] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
[ 2.574080] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.575170] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.575265] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.577596] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.577601] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.577770] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.132253] PM: Starting manual resume from disk
[ 3.132255] PM: Hibernation image partition 8:8 present
[ 3.132256] PM: Looking for hibernation image.
[ 3.132490] PM: Image not found (code -22)
[ 3.132494] PM: Hibernation image not present or could not be loaded.
[ 3.138696] EXT4-fs (sda6): mounted filesystem with writeback data mode. Opts: data=writeback
[ 3.356851] udevd[367]: starting version 175
[ 3.395087] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 3.395093] ACPI: Power Button [PWRB]
[ 3.395173] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 3.395176] ACPI: Power Button [PWRF]
[ 3.395581] ACPI: Requesting acpi_cpufreq
[ 3.411763] [drm] Initialized drm 1.1.0 20060810
[ 3.420025] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 3.424481] i915 0000:00:02.0: setting latency timer to 64
[ 3.424500] iTCO_vendor_support: vendor-support=0
[ 3.425515] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 3.425583] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 3.444780] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[ 3.444783] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 3.445000] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[ 3.445007] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 3.445009] [drm] Driver supports precise vblank timestamp query.
[ 3.445051] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem :o wns=io+mem
[ 3.445232] Linux media interface: v0.10
[ 3.447640] Linux video capture interface: v2.00
[ 3.448770] gspca_main: v2.14.0 registered
[ 3.450100] gspca_main: zc3xx-2.14.0 probing 0ac8:305b
[ 3.479072] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 3.701908] fbcon: inteldrmfb (fb0) is primary device
[ 3.880987] Console: switching to colour frame buffer device 240x67
[ 3.890384] fb0: inteldrmfb frame buffer device
[ 3.890386] drm: registered panic notifier
[ 3.890430] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.890744] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 3.890770] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 4.442868] HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0
[ 4.443057] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 4.514772] input: zc3xx as /devices/pci0000:00/0000:00:1c.1/0000:02:00.0/usb2/2-2/input/input8
[ 4.514931] usbcore: registered new interface driver zc3xx
[ 4.894960] Adding 691196k swap on /dev/sda8. Priority:-1 extents:1 across:691196k SS
[ 4.909235] EXT4-fs (sda6): re-mounted. Opts: discard
[ 4.931641] loop: module loaded
[ 5.296564] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 5.488150] r8169 0000:01:00.0: firmware: agent loaded rtl_nic/rtl8168e-3.fw into memory
[ 5.567803] r8169 0000:01:00.0: eth0: link down
[ 5.567811] r8169 0000:01:00.0: eth0: link down
[ 5.568212] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.633266] RPC: Registered named UNIX socket transport module.
[ 5.633271] RPC: Registered udp transport module.
[ 5.633274] RPC: Registered tcp transport module.
[ 5.633277] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 5.638478] FS-Cache: Loaded
[ 5.646702] FS-Cache: Netfs 'nfs' registered for caching
[ 5.652006] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 6.103564] lp: driver loaded but no devices found
[ 6.105670] ppdev: user-space parallel port driver
[ 7.823702] r8169 0000:01:00.0: eth0: link up
[ 7.824097] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 17.866789] eth0: no IPv6 routers present
[ 270.987898] usb 2-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 276.928119] usb 2-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
hsurim@H61N-USB3:~$ Zainstaluj pakiet: hplip-gui i tam w preferencjach spróbuj dodać swoją drukarkę i skanować stamtąd.
Pokaż wyniki:
Pokaż wyniki:
Kod: Zaznacz cały
hp-scan -ldebug
hp-check -rtKod: Zaznacz cały
hsurim@H61N-USB3:~$ hp-scan -ldebug
HP Linux Imaging and Printing System (ver. 3.12.6)
Scan Utility ver. 2.2
Copyright (c) 2001-14 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
hp-scan[5273]: debug: getDeviceUri(None, None, ['hpaio'], {'scan-type': (<built-in function gt>, 0)}, , True)
hp-scan[5273]: debug: Mode=0
hp-scan[5273]: debug: Device URI socket://10.0.0.6:9100 is invalid/unknown
hp-scan[5273]: debug: Exception: 4 (Unknown/invalid device-uri field)
hp-scan[5273]: debug: {}
error: No device selected/specified or that supports this functionality.
hsurim@H61N-USB3:~$ Kod: Zaznacz cały
hsurim@H61N-USB3:~$ hp-check -rt
HP Linux Imaging and Printing System (ver. 3.12.6)
Dependency/Version Check Utility ver. 15
Copyright (c) 2001-14 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to
determine if the proper dependencies are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built
HPLIP supplied tarball has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and
run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
Saving output in log file: /home/hsurim/hp-check.log
Initializing. Please wait...
warning: debian-7.6 version is not supported. Using debian-6.0.5 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 3.2.0-4-amd64 #1 SMP Debian 3.2.60-1+deb7u3 GNU/Linux
Host: H61N-USB3
Proc: 3.2.0-4-amd64 #1 SMP Debian 3.2.60-1+deb7u3 GNU/Linux
Distribution: debian 7.6
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.12.6
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for debian distro 7.6 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.12.6
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip-doc/HTML
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.12.6
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: Nie ma takiego pliku ani katalogu
Current contents of '~/.hplip/hplip.conf' file:
[last_used]
device_uri = "hp:/net/Photosmart_C4700_series?zc=HPB9F340-3"
printer_name =
working_dir = .
[settings]
systray_visible = 0
systray_messages = 0
[commands]
scan = /usr/bin/simple-scan %SANE_URI%
[refresh]
rate = 30
enable = false
type = 1
[polling]
enable = false
interval = 5
device_list =
[fax]
voice_phone =
email_address =
[upgrade]
notify_upgrade = false
last_upgraded_time = 1406983785.33203
pending_upgrade_time = 0
[installation]
date_time = 02.08.2014 14:53:05
version = 3.12.6
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
--------------------------
| External Dependencies |
--------------------------
gs Ghostscript REQUIRED 7.05 9.05 OK -
network Network-wget OPTIONAL - 1.13.4 OK -
error: dbus DBus REQUIRED - 1.6.8 MISSING 'DBUS may not be installed or not running'
scanimage Shell-Scanning OPTIONAL 1.0 1.0.22 OK -
policykit Admin-Policy-framework OPTIONAL - 0.105 OK -
xsane SANE-GUI OPTIONAL 0.9 0.998 OK -
error: cups CUPS REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running'
-------------------------
| General Dependencies |
-------------------------
reportlab Python-PDF-Lib OPTIONAL 2.0 2.5 OK -
error: libcrypto OpenSSL-Crypto-Lib REQUIRED - 1.0.1 MISSING 'libcrypto needs to be installed'
pil Python-Image-Lib OPTIONAL - 1.1.7 OK -
pyqt4-dbus PyQt4-DBUS REQUIRED 4.0 4.9.3 OK -
error: libjpeg JPEG-Lib REQUIRED - - MISSING 'libjpeg needs to be installed'
libpthread POSIX-Threads-Lib REQUIRED - 2.13 OK -
python-dbus Python-DBUS REQUIRED 0.80.0 1.1.1 OK -
error: cups-ddk CUPS-DDK OPTIONAL - - MISSING 'cups-ddk needs to be installed'
error: python-devel Python-SDK REQUIRED 2.2 2.7.3 MISSING 'python-devel needs to be installed'
pyqt4 Python-Qt4 REQUIRED 4.0 4.9.3 OK -
error: cups-devel CUPS-SDK REQUIRED - - MISSING 'cups-devel needs to be installed'
error: sane-devel SANE-SDK REQUIRED - - MISSING 'sane-devel needs to be installed'
error: libusb USB-Lib REQUIRED - 1.0 MISSING 'libusb needs to be installed'
sane Scan-Lib REQUIRED - - OK -
error: cups-image CUPS-Image-Lib REQUIRED - - MISSING 'cups-image needs to be installed'
error: libnetsnmp-devel SNMP-Networking-SDK REQUIRED 5.0.9 5.4.3 MISSING 'libnetsnmp-devel needs to be installed'
python-xml Python-XML-Lib REQUIRED - 2.1.0 OK -
python-notify Desktop-notifications OPTIONAL - - OK -
----------------------
| Python Extentions |
----------------------
cupsext CUPS-Extension REQUIRED - 3.12.6 OK -
pcardext PhotoCard-Extension REQUIRED - 3.12.6 OK -
hpmudext IO-Extension REQUIRED - 3.12.6 OK -
-----------------------
| Scan Configuration |
-----------------------
hpaio HPLIP-SANE-Backend REQUIRED - 3.12.6 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.12.6 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
device `v4l:/dev/video0' is a Noname PC Camera virtual device
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
No devices found.
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
HP_Photosmart_C4700_series
--------------------------
Type: Unknown
Device URI: socket://10.0.0.6:9100
PPD: /etc/cups/ppd/HP_Photosmart_C4700_series.ppd
PPD Description: HP Photosmart c4700 Series, hpcups 3.12.6
Printer status: printer HP_Photosmart_C4700_series is idle. enabled since pią, 1 sie 2014, 18:53:38
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
--------------
| PERMISSION |
--------------
error: groups user-groups Required - - MISSING ['lp', 'lpadmin']
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
error: 'libdbus-1-dev' package is missing/incompatible
error: 'libcups2' package is missing/incompatible
error: 'libssl-dev' package is missing/incompatible
error: 'libjpeg62-dev' package is missing/incompatible
error: 'python-dev' package is missing/incompatible
error: 'libcups2-dev' package is missing/incompatible
error: 'cups-bsd' package is missing/incompatible
error: 'cups-client' package is missing/incompatible
error: 'libsane-dev' package is missing/incompatible
error: 'libusb-1.0.0-dev' package is missing/incompatible
error: 'libcupsimage2' package is missing/incompatible
error: 'libcupsimage2-dev' package is missing/incompatible
error: 'libsnmp-dev' package is missing/incompatible
Missing Optional Dependencies
-----------------------------
error: 'cups-ddk' package is missing/incompatible
Total Errors: 16
Total Warnings: 0
Re-run 'hp-check --fix' command to prompt and fix the issues.
Done.
hsurim@H61N-USB3:~$ Uruchamiam: hp-check --fix
==============================
Po uruchomieniu hp-check --fix, była sugestia połączenia do jakiejś grupy, ale nic to nie dało/zmieniło.
- Załączniki
-
Jesteś dodany do grupy lp? Co pokazuje:
Kod: Zaznacz cały
groupsKod: Zaznacz cały
hsurim@H61N-USB3:~$ groups
hsurim cdrom floppy audio dip video plugdev scanner netdev
hsurim@H61N-USB3:~$ Ale jeszcze dla wszystkiego, zainstaluję system od nowa, tyle że spróbuję z XFCE z poradnika
Dlaczego nie postąpiłeś zgodnie z sugestią? Nie należysz do grupy lp. Jako root:
Kod: Zaznacz cały
usermod -aG lp hsurim