Polskie Forum Użytkowników Debiana

Polski portal użytkowników dystrybucji Debian GNU/Linux, dyskusje, artykuły, nowości, blog, porady, pomoc.
https://www.debian.pl/

compiz-fusion na atiX300 i otwarte sterowniki

https://www.debian.pl/viewtopic.php?t=9488

Strona 1 z 1

compiz-fusion na atiX300 i otwarte sterowniki

: 01 września 2008, 15:55
autor: raggo82
Witam
Mój problem wygląda następująco: mam na Debianie Lenny i na otwartych sterownikach ati z grafiką X300 zainstalowanego compiza, który po kilku minutach zwiesza się i nic nie działa tzn. można ruszać tylko kursorem myszy.
Czy ktoś wie jak to naprawić?
Oto mój xorg conf:

Kod: Zaznacz cały

Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	RgbPath      "/etc/X11/rgb"
	ModulePath   "/usr/lib/xorg/modules"
	FontPath     "/usr/share/fonts/X11/misc"
	FontPath     "/usr/share/fonts/X11/cyrillic"
	FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
	FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
	FontPath     "/usr/share/fonts/X11/Type1"
	FontPath     "/usr/share/fonts/X11/100dpi"
	FontPath     "/usr/share/fonts/X11/75dpi"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load  "record"
	Load  "dri"
	Load  "dbe"
	Load  "GLcore"
	Load  "glx"
	Load  "xtrap"
	Load  "extmod"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
	Option      "XkbRules"  "xorg"
	Option      "XkbModel"  "pc105"
	Option      "XkbLayout" "pl"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	#DisplaySize	  300   230	# mm
	Identifier   "Monitor0"
	VendorName   "AOC"
	ModelName    "LM525"
 ### Comment all HorizSync and VertRefresh values to use DDC:
	HorizSync    30.0 - 63.0
	VertRefresh  55.0 - 75.0
	Option	    "DPMS"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: [i]: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"            	# [<bool>]
        #Option     "SWcursor"           	# [<bool>]
        #Option     "Dac6Bit"            	# [<bool>]
        #Option     "Dac8Bit"            	# [<bool>]
        #Option     "BusType"            	# [<str>]
        #Option     "CPPIOMode"          	# [<bool>]
        #Option     "CPusecTimeout"      	# [i]
        #Option     "AGPMode"            	# [i]
        #Option     "AGPFastWrite"       	# [<bool>]
        #Option     "AGPSize"            	# [i]
        #Option     "GARTSize"           	# [i]
        #Option     "RingSize"           	# [i]
        #Option     "BufferSize"         	# [i]
        #Option     "EnableDepthMoves"   	# [<bool>]
        #Option     "EnablePageFlip"     	# [<bool>]
        #Option     "NoBackBuffer"       	# [<bool>]
        #Option     "DMAForXv"           	# [<bool>]
        #Option     "FBTexPercent"       	# [i]
        #Option     "DepthBits"          	# [i]
        #Option     "PCIAPERSize"        	# [i]
        #Option     "AccelDFS"           	# [<bool>]
        #Option     "DDCMode"            	# [<bool>]
        #Option     "IgnoreEDID"         	# [<bool>]
        #Option     "DisplayPriority"    	# [<str>]
        #Option     "PanelSize"          	# [<str>]
        #Option     "ForceMinDotClock"   	# <freq>
        #Option     "ColorTiling"        	# [<bool>]
        #Option     "VideoKey"           	# [i]
        #Option     "RageTheatreCrystal" 	# [i]
        #Option     "RageTheatreTunerPort" 	# [i]
        #Option     "RageTheatreCompositePort" 	# [i]
        #Option     "RageTheatreSVideoPort" 	# [i]
        #Option     "TunerType"          	# [i]
        #Option     "RageTheatreMicrocPath" 	# <str>
        #Option     "RageTheatreMicrocType" 	# <str>
        #Option     "ScalerWidth"        	# [i]
        #Option     "RenderAccel"        	# [<bool>]
        #Option     "SubPixelOrder"      	# [<str>]
        #Option     "ShowCache"          	# [<bool>]
        #Option     "DynamicClocks"      	# [<bool>]
        #Option     "VGAAccess"          	# [<bool>]
        #Option     "ReverseDDC"         	# [<bool>]
        #Option     "LVDSProbePLL"       	# [<bool>]
        #Option     "AccelMethod"        	# <str>
        #Option     "DRI"                	# [<bool>]
        #Option     "ConnectorTable"     	# <str>
        #Option     "DefaultConnectorTable" 	# [<bool>]
        #Option     "DefaultTMDSPLL"     	# [<bool>]
        #Option     "TVDACLoadDetect"    	# [<bool>]
        #Option     "ForceTVOut"         	# [<bool>]
        #Option     "TVStandard"         	# <str>
        #Option     "IgnoreLidStatus"    	# [<bool>]
        #Option     "DefaultTVDACAdj"    	# [<bool>]
        #Option     "Int10"              	# [<bool>]
	Identifier  "Card0"
	Driver      "radeon"
	VendorName  "ATI Technologies Inc"
	BoardName   "RV370 5B60 [Radeon X300 (PCIE)]"
	BusID       "PCI:2:0:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection
i logi z xorg'a w załączniku
Z góry dziękuję za pomoc.

: 01 września 2008, 16:22
autor: maly
Spróbuj dodać wpisy w xorg.conf

http://debian.linux.pl/viewtopic.php?t=666

: 02 września 2008, 08:59
autor: raggo82
Witam dodałem te wpisy do xorg'a o których pisał Kaka w poscie wskazanym przez malego i dalej Lipa, dalej to samo czyli po kilku minutach wszystko pada :(
Czy ktoś wie co z tym zrobić?

[ Dodano: 2008-09-04, 09:02 ]

Dołączam także mojego "nowego" xorga, w którym dalej wystepuje ten problem a także logi z xorga w załączniku, prosze o pomoc bo jestem w kropce :(

Kod: Zaznacz cały

Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
	Option 		"AIGLX"	"true" # sterownik wolny
EndSection

Section "Files"
	RgbPath      "/etc/X11/rgb"
	ModulePath   "/usr/lib/xorg/modules"
	FontPath     "/usr/share/fonts/X11/misc"
	FontPath     "/usr/share/fonts/X11/cyrillic"
	FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
	FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
	FontPath     "/usr/share/fonts/X11/Type1"
	FontPath     "/usr/share/fonts/X11/100dpi"
	FontPath     "/usr/share/fonts/X11/75dpi"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load  "record"
	Load  "dri"
	Load  "dbe"
	Load  "GLcore"
	Load  "glx"
	Load  "xtrap"
	Load  "extmod"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
	Option      "XkbRules"  "xorg"
	Option      "XkbModel"  "pc105"
	Option      "XkbLayout" "pl"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	#DisplaySize	  300   230	# mm
	Identifier   "Monitor0"
	VendorName   "AOC"
	ModelName    "LM525"
 ### Comment all HorizSync and VertRefresh values to use DDC:
	HorizSync    30.0 - 63.0
	VertRefresh  55.0 - 75.0
	Option	    "DPMS"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: [i]: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"            	# [<bool>]
        #Option     "SWcursor"           	# [<bool>]
        #Option     "Dac6Bit"            	# [<bool>]
        #Option     "Dac8Bit"            	# [<bool>]
        #Option     "BusType"            	# [<str>]
        #Option     "CPPIOMode"          	# [<bool>]
        #Option     "CPusecTimeout"      	# [i]
        #Option     "AGPMode"            	# [i]
        #Option     "AGPFastWrite"       	# [<bool>]
        #Option     "AGPSize"            	# [i]
        #Option     "GARTSize"           	# [i]
        #Option     "RingSize"           	# [i]
        #Option     "BufferSize"         	# [i]
        #Option     "EnableDepthMoves"   	# [<bool>]
        #Option     "EnablePageFlip"     	# [<bool>]
        #Option     "NoBackBuffer"       	# [<bool>]
        #Option     "DMAForXv"           	# [<bool>]
        #Option     "FBTexPercent"       	# [i]
        #Option     "DepthBits"          	# [i]
        #Option     "PCIAPERSize"        	# [i]
        #Option     "AccelDFS"           	# [<bool>]
        #Option     "DDCMode"            	# [<bool>]
        #Option     "IgnoreEDID"         	# [<bool>]
        #Option     "DisplayPriority"    	# [<str>]
        #Option     "PanelSize"          	# [<str>]
        #Option     "ForceMinDotClock"   	# <freq>
        #Option     "ColorTiling"        	# [<bool>]
        #Option     "VideoKey"           	# [i]
        #Option     "RageTheatreCrystal" 	# [i]
        #Option     "RageTheatreTunerPort" 	# [i]
        #Option     "RageTheatreCompositePort" 	# [i]
        #Option     "RageTheatreSVideoPort" 	# [i]
        #Option     "TunerType"          	# [i]
        #Option     "RageTheatreMicrocPath" 	# <str>
        #Option     "RageTheatreMicrocType" 	# <str>
        #Option     "ScalerWidth"        	# [i]
        #Option     "RenderAccel"        	# [<bool>]
        #Option     "SubPixelOrder"      	# [<str>]
        #Option     "ShowCache"          	# [<bool>]
        #Option     "DynamicClocks"      	# [<bool>]
        #Option     "VGAAccess"          	# [<bool>]
        #Option     "ReverseDDC"         	# [<bool>]
        #Option     "LVDSProbePLL"       	# [<bool>]
        #Option     "AccelMethod"        	# <str>
        #Option     "DRI"                	# [<bool>]
        #Option     "ConnectorTable"     	# <str>
        #Option     "DefaultConnectorTable" 	# [<bool>]
        #Option     "DefaultTMDSPLL"     	# [<bool>]
        #Option     "TVDACLoadDetect"    	# [<bool>]
        #Option     "ForceTVOut"         	# [<bool>]
        #Option     "TVStandard"         	# <str>
        #Option     "IgnoreLidStatus"    	# [<bool>]
        #Option     "DefaultTVDACAdj"    	# [<bool>]
        #Option     "Int10"              	# [<bool>]
	Identifier  "Card0"
	Driver      "radeon"
	VendorName  "ATI Technologies Inc"
	BoardName   "RV370 5B60 [Radeon X300 (PCIE)]"
	BusID       "PCI:2:0:0"
	#Option 		"AddARGBGLXVisuals" "On"
	Option          "XAANoOffscreenPixmaps"	"true" # ati
	Option          "RenderAccel" 	"true"				#ati
	Option 		"backingstore"	"true"			#ati

EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "DRI"
	Mode	0666
EndSection

#sterowniki wolne
Section "Extensions"
	Option 	"Composite"	"Enable"
	Option 	"RENDER"	"Enable" 
EndSection
Strefa czasowa UTC+02:00
Strona 1 z 1

Technologię dostarcza phpBB® Forum Software © phpBB Limited

Polski pakiet językowy dostarcza phpBB.pl