Polski portal użytkowników dystrybucji Debian GNU/Linux, dyskusje, artykuły, nowości, blog, porady, pomoc.
https://www.debian.pl/
Kod: Zaznacz cały
dzidzia:/home/dzidzia# lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 002: ID 03f0:171d Hewlett-Packard Wireless (Bluetooth + WLAN) Interface [Integrated Module]
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 046d:c521 Logitech, Inc. MX620 Laser Cordless Mouse
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 003: ID 064e:a110 Suyin Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Kod: Zaznacz cały
ode on CPU 1
[ 0.504049] Switched to high resolution mode on CPU 0
[ 0.596284] it is
[ 0.838671] Freeing initrd memory: 7028k freed
[ 0.841118] Simple Boot Flag at 0x35 set to 0x1
[ 0.612829] audit: initializing netlink socket (disabled)
[ 0.612845] type=2000 audit(1216451607.840:1): initialized
[ 0.613176] Total HugeTLB memory allocated, 0
[ 0.613251] VFS: Disk quotas dquot_6.5.1
[ 0.613272] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.613345] io scheduler noop registered
[ 0.613346] io scheduler anticipatory registered
[ 0.613347] io scheduler deadline registered
[ 0.613357] io scheduler cfq registered (default)
[ 0.613498] pci 0000:01:00.0: Boot video device
[ 0.613581] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.613607] assign_interrupt_mode Found MSI capability
[ 0.613632] Allocate Port Service[0000:00:01.:p cie00]
[ 0.613661] Allocate Port Service[0000:00:01.:p cie02]
[ 0.613690] Allocate Port Service[0000:00:01.:p cie03]
[ 0.613754] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.613797] assign_interrupt_mode Found MSI capability
[ 0.613840] Allocate Port Service[0000:00:1c.:p cie00]
[ 0.613867] Allocate Port Service[0000:00:1c.:p cie02]
[ 0.613894] Allocate Port Service[0000:00:1c.:p cie03]
[ 0.613985] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.614028] assign_interrupt_mode Found MSI capability
[ 0.614070] Allocate Port Service[0000:00:1c.1 :p cie00]
[ 0.614098] Allocate Port Service[0000:00:1c.1 :p cie02]
[ 0.614126] Allocate Port Service[0000:00:1c.1 :p cie03]
[ 0.614220] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 0.614262] assign_interrupt_mode Found MSI capability
[ 0.614304] Allocate Port Service[0000:00:1c.5 :p cie00]
[ 0.614334] Allocate Port Service[0000:00:1c.5 :p cie02]
[ 0.614362] Allocate Port Service[0000:00:1c.5 :p cie03]
[ 0.616426] Real Time Clock Driver v1.12ac
[ 0.616634] hpet_resources: 0xfed00000 is busy
[ 0.616672] Linux agpgart interface v0.103
[ 0.616674] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 0.616907] pnp: the driver 'serial' has been registered
[ 0.617582] brd: module loaded
[ 0.617634] input: Macintosh mouse button emulation as /class/input/input0
[ 0.617703] pnp: the driver 'i8042 kbd' has been registered
[ 0.617712] i8042 kbd 00:09: driver attached
[ 0.617734] pnp: the driver 'i8042 aux' has been registered
[ 0.617746] i8042 aux 00:0a: driver attached
[ 0.617768] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.888088] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.888093] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.908124] mice: PS/2 mouse device common for all mice
[ 0.908154] cpuidle: using governor ladder
[ 0.908155] cpuidle: using governor menu
[ 0.908421] TCP cubic registered
[ 0.908429] NET: Registered protocol family 1
[ 0.908436] NET: Registered protocol family 17
[ 0.908526] registered taskstats version 1
[ 0.908626] Freeing unused kernel memory: 372k freed
[ 0.938750] input: AT Translated Set 2 keyboard as /class/input/input1
[ 0.967221] ACPI: SSDT BFED69FE, 02BC (r1 HP 30CB 3000 INTL 20061109)
[ 0.967557] ACPI: SSDT BFED638F, 05EA (r1 HP 30CB 3001 INTL 20061109)
[ 0.969567] Monitor-Mwait will be used to enter C-1 state
[ 0.969569] Monitor-Mwait will be used to enter C-2 state
[ 0.969659] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 0.969691] ACPI: ACPI0007:00 is registered as cooling_device0
[ 0.969693] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.969988] ACPI: SSDT BFED6CBA, 00C8 (r1 HP 30CB 3000 INTL 20061109)
[ 0.970195] ACPI: SSDT BFED6979, 0085 (r1 HP 30CB 3000 INTL 20061109)
[ 0.734003] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 0.734029] ACPI: ACPI0007:01 is registered as cooling_device1
[ 0.734032] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.971116] Marking TSC unstable due to TSC halts in idle
[ 0.973824] ACPI Exception (thermal-0365): AE_BAD_DATA, No critical threshold [20070126]
[ 1.189567] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[ 1.189582] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 1.189585] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.189718] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.193637] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.193643] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 1.193653] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8404800
[ 1.210397] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 1.210490] usb usb1: configuration #1 chosen from 1 choice
[ 1.210508] hub 1-0:1.0: USB hub found
[ 1.210514] hub 1-0:1.0: 4 ports detected
[ 1.217308] USB Universal Host Controller Interface driver v3.0
[ 1.238148] No dock devices found.
[ 1.242214] SCSI subsystem initialized
[ 1.250981] libata version 3.00 loaded.
[ 1.251226] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 1.251228] ricoh-mmc: Copyright(c) Philip Langdale
[ 1.267933] sdhci: Secure Digital Host Controller Interface driver
[ 1.267935] sdhci: Copyright(c) Pierre Ossman
[ 1.312492] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.312495] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.312496] usb usb1: Product: EHCI Host Controller
[ 1.312498] usb usb1: Manufacturer: Linux 2.6.25-2-amd64 ehci_hcd
[ 1.312499] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.312553] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 1.312566] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 1.312569] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.312613] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.316532] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.316538] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 1.316547] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8404c00
[ 1.332443] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 1.332516] usb usb2: configuration #1 chosen from 1 choice
[ 1.332533] hub 2-0:1.0: USB hub found
[ 1.332538] hub 2-0:1.0: 6 ports detected
[ 1.348745] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.348747] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.348748] usb usb2: Product: EHCI Host Controller
[ 1.348750] usb usb2: Manufacturer: Linux 2.6.25-2-amd64 ehci_hcd
[ 1.348751] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.199008] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
[ 1.199008] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 1.199008] PCI: Setting latency timer of device 0000:06:00.0 to 64
[ 1.199008] eth0: RTL8168b/8111b at 0xffffc20000644000, 00:1e:68:0d:2f:57, XID 38000000 IRQ 1275
[ 1.350263] ACPI: PCI Interrupt 0000:07:09.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 1.259077] hub 1-0:1.0: unable to enumerate USB device on port 4
[ 1.420724] firewire_ohci: Added fw-ohci device 0000:07:09.0, OHCI version 1.10
[ 1.420834] ricoh-mmc: Ricoh MMC controller found at 0000:07:09.2 [1180:0843] (rev 12)
[ 1.420845] ricoh-mmc: Controller is now disabled.
[ 1.423597] ahci 0000:00:1f.2: version 3.0
[ 1.423630] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 1.423779] Uniform Multi-Platform E-IDE driver
[ 1.423780] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1.495463] hub 2-0:1.0: unable to enumerate USB device on port 3
[ 1.734895] usb 2-4: new high speed USB device using ehci_hcd and address 3
[ 1.479136] firewire_core: created device fw0: GUID 00241b00dd23b000, S400
[ 1.520416] usb 2-4: configuration #1 chosen from 1 choice
[ 1.521798] usb 2-4: New USB device found, idVendor=064e, idProduct=a110
[ 1.521800] usb 2-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 1.521802] usb 2-4: Product: HP Webcam
[ 1.521803] usb 2-4: Manufacturer: SuYin
[ 1.521804] usb 2-4: SerialNumber: CN0314-MI02-VH-R03.01.01
[ 1.592021] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 1.592023] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
[ 1.592028] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 1.592263] scsi0 : ahci
[ 1.592333] scsi1 : ahci
[ 1.592403] scsi2 : ahci
[ 1.592476] ata1: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404100 irq 1274
[ 1.592479] ata2: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404180 irq 1274
[ 1.592481] ata3: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404200 irq 1274
[ 2.749604] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.611341] ata1.00: ATA-8: Hitachi HTS542525K9SA00, BBFOC32P, max UDMA/100
[ 1.611343] ata1.00: 488397168 sectors, multi 16: LBA48
[ 1.612312] ata1.00: configured for UDMA/100
[ 3.060952] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.535997] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.620843] ata3.00: ATA-8: Hitachi HTS542525K9SA00, BBFOC32P, max UDMA/100
[ 1.620843] ata3.00: 488397168 sectors, multi 16: LBA48
[ 1.620928] ata3.00: configured for UDMA/100
[ 1.620928] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54252 BBFO PQ: 0 ANSI: 5
[ 1.620928] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54252 BBFO PQ: 0 ANSI: 5
[ 3.538033] sdhci: SDHCI controller found at 0000:07:09.1 [1180:0822] (rev 22)
[ 3.538051] ACPI: PCI Interrupt 0000:07:09.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 3.538066] sdhc0:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 3.538102] mmc0: SDHCI at 0xf8100800 irq 21 DMA
[ 3.538754] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 3.538761] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 3.538764] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.538804] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 3.538834] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[ 3.538918] usb usb3: configuration #1 chosen from 1 choice
[ 3.538936] hub 3-0:1.0: USB hub found
[ 3.538941] hub 3-0:1.0: 2 ports detected
[ 3.553790] Driver 'sd' needs updating - please use bus_type methods
[ 3.553854] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 3.553869] sd 0:0:0:0: [sda] Write Protect is off
[ 3.553871] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.553898] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.553953] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[ 3.553968] sd 0:0:0:0: [sda] Write Protect is off
[ 3.553970] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.553996] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.553998] sda: sda1 sda2 < sda5 sda6 sda7 >
[ 1.665131] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.665131] sd 2:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
[ 1.665131] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.665131] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.665131] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.665131] sd 2:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
[ 1.665131] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.665131] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.665131] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.665131] sdb: sdb1
[ 1.683533] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 3.639959] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.639961] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.639963] usb usb3: Product: UHCI Host Controller
[ 3.639964] usb usb3: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd
[ 3.639965] usb usb3: SerialNumber: 0000:00:1a.0
[ 3.639995] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 3.640002] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 3.640005] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 3.640043] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 3.640069] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[ 3.640148] usb usb4: configuration #1 chosen from 1 choice
[ 3.640166] hub 4-0:1.0: USB hub found
[ 3.640170] hub 4-0:1.0: 2 ports detected
[ 3.742268] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.742270] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.742272] usb usb4: Product: UHCI Host Controller
[ 3.742273] usb usb4: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd
[ 3.742275] usb usb4: SerialNumber: 0000:00:1a.1
[ 3.742309] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 3.742317] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 3.742321] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.742363] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 3.742390] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
[ 3.742474] usb usb5: configuration #1 chosen from 1 choice
[ 3.742491] hub 5-0:1.0: USB hub found
[ 3.742496] hub 5-0:1.0: 2 ports detected
[ 3.844879] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.844881] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.844882] usb usb5: Product: UHCI Host Controller
[ 3.844883] usb usb5: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd
[ 3.844885] usb usb5: SerialNumber: 0000:00:1d.0
[ 3.844907] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 3.844913] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 3.844916] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.844946] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 3.844977] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
[ 3.845057] usb usb6: configuration #1 chosen from 1 choice
[ 3.845071] hub 6-0:1.0: USB hub found
[ 3.845075] hub 6-0:1.0: 2 ports detected
[ 3.952699] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.952701] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.952702] usb usb6: Product: UHCI Host Controller
[ 3.952704] usb usb6: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd
[ 3.952705] usb usb6: SerialNumber: 0000:00:1d.1
[ 3.952727] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 3.952733] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 3.952735] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.952766] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 3.952792] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
[ 3.952868] usb usb7: configuration #1 chosen from 1 choice
[ 3.952882] hub 7-0:1.0: USB hub found
[ 3.952886] hub 7-0:1.0: 2 ports detected
[ 1.881247] usb 4-2: new low speed USB device using uhci_hcd and address 2
[ 4.055450] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.055452] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.055454] usb usb7: Product: UHCI Host Controller
[ 4.055455] usb usb7: Manufacturer: Linux 2.6.25-2-amd64 uhci_hcd
[ 4.055456] usb usb7: SerialNumber: 0000:00:1d.2
[ 1.889712] ICH8M: IDE controller (0x8086:0x2850 rev 0x03) at PCI slot 0000:00:1f.1
[ 1.889712] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
[ 1.889712] ICH8M: not 100% native mode: will probe irqs later
[ 1.889712] ide0: BM-DMA at 0x18a0-0x18a7, BIOS settings: hda :D MA, hdb:PIO
[ 1.889712] ide1: BM-DMA at 0x18a8-0x18af, BIOS settings: hdc:PIO, hdd:PIO
[ 1.889712] Probing IDE interface ide0...
[ 1.978249] usb 4-2: configuration #1 chosen from 1 choice
[ 1.988895] usb 4-2: New USB device found, idVendor=046d, idProduct=c521
[ 1.988897] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.988899] usb 4-2: Product: USB Receiver
[ 1.988900] usb 4-2: Manufacturer: Logitech
[ 2.072900] usb 6-1: new full speed USB device using uhci_hcd and address 2
[ 2.105607] usb 6-1: configuration #1 chosen from 1 choice
[ 2.107268] usb 6-1: New USB device found, idVendor=08ff, idProduct=2580
[ 2.107270] usb 6-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.107272] usb 6-1: Product: Fingerprint Sensor
[ 4.690318] usbcore: registered new interface driver hiddev
[ 2.235059] input: Logitech USB Receiver as /class/input/input2
[ 2.244246] input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.1-2
[ 2.272377] input: Logitech USB Receiver as /class/input/input3
[ 2.282468] input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.1-2
[ 2.282479] usbcore: registered new interface driver usbhid
[ 2.282481] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 2.302735] hda: TOSHIBA DVDW/HD SD-L802B, ATAPI CD/DVD-ROM drive
[ 2.582041] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 2.583179] hda: MWDMA2 mode selected
[ 2.585007] Probing IDE interface ide1...
[ 3.052435] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 3.074946] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 8192kB Cache
[ 3.074950] Uniform CD-ROM driver Revision: 3.20
[ 3.325559] PM: Starting manual resume from disk
[ 3.379227] kjournald starting. Commit interval 5 seconds
[ 3.379235] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.933913] input: Power Button (FF) as /class/input/input4
[ 7.980620] ACPI: Power Button (FF) [PWRF]
[ 7.980669] input: Power Button (CM) as /class/input/input5
[ 8.044632] ACPI: Power Button (CM) [PWRB]
[ 8.044678] input: Sleep Button (CM) as /class/input/input6
[ 8.108621] ACPI: Sleep Button (CM) [SLPB]
[ 8.108667] input: Lid Switch as /class/input/input7
[ 8.142320] ACPI: Lid Switch [LID]
[ 5.621056] ACPI: Battery Slot [BAT0] (battery present)
[ 8.248347] ACPI: AC Adapter [ACAD] (on-line)
[ 5.624071] ACPI: WMI: Mapper loaded
[ 5.675379] ACPI: device:06 is registered as cooling_device2
[ 5.675474] input: Video Bus as /class/input/input8
[ 5.718926] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 5.719368] input: Video Bus as /class/input/input9
[ 5.774974] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 8.427789] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 8.427855] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[ 8.427889] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.816082] input: PC Speaker as /class/input/input10
[ 5.938451] ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 19 (level, low) -> IRQ 19
[ 8.582189] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for Linux, 1.2.23ks
[ 8.582192] iwl4965: Copyright(c) 2003-2007 Intel Corporation
[ 8.582245] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 8.582252] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 8.582270] iwl4965: Detected Intel Wireless WiFi Link 4965AGN
[ 8.629274] iwl4965: Tunable channels: 13 802.11bg, 19 802.11a channels
[ 8.631147] phy0: Selected rate control algorithm 'iwl-4965-rs'
[ 8.740301] ACPI: PCI interrupt for device 0000:02:00.0 disabled
[ 6.180292] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 6.180316] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 6.545201] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
[ 6.585462] input: SynPS/2 Synaptics TouchPad as /class/input/input11
[ 7.125167] Adding 2554292k swap on /dev/sda6. Priority:-1 extents:1 across:2554292k
[ 7.283012] EXT3 FS on sda5, internal journal
[ 8.022621] loop: module loaded
[ 8.529968] kjournald starting. Commit interval 5 seconds
[ 8.530091] EXT3 FS on sda7, internal journal
[ 8.530091] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.616160] fuse init (API version 7.9)
[ 10.193397] r8169: eth0: link up
[ 10.193403] r8169: eth0: link up
[ 13.863435] pnp: the driver 'parport_pc' has been registered
[ 13.864376] lp: driver loaded but no devices found
[ 13.959882] ppdev: user-space parallel port driver
[ 14.383074] NET: Registered protocol family 10
[ 14.383482] lo: Disabled Privacy Extensions
[ 19.202599] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 17.707399] Bluetooth: Core ver 2.11
[ 17.707815] NET: Registered protocol family 31
[ 17.707819] Bluetooth: HCI device and connection manager initialized
[ 17.707822] Bluetooth: HCI socket layer initialized
[ 21.145145] Bluetooth: L2CAP ver 2.9
[ 21.145149] Bluetooth: L2CAP socket layer initialized
[ 17.826714] Bluetooth: RFCOMM socket layer initialized
[ 17.826734] Bluetooth: RFCOMM TTY layer initialized
[ 17.826739] Bluetooth: RFCOMM ver 1.8
[ 18.003081] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 18.003197] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 40100102, writing 40100106)
[ 18.065554] iwl4965: iwlwifi-4965-1.ucode firmware file req failed: Reason -2
[ 18.065554] iwl4965: Could not read microcode: -2
[ 18.065554] ACPI: PCI interrupt for device 0000:02:00.0 disabled
[ 21.021051] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 21.021164] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100102, writing 40100106)
[ 21.029812] iwl4965: iwlwifi-4965-1.ucode firmware file req failed: Reason -2
[ 21.029824] iwl4965: Could not read microcode: -2
[ 21.029902] ACPI: PCI interrupt for device 0000:02:00.0 disabled
[ 21.094302] nvidia: module license 'NVIDIA' taints kernel.
[ 21.348021] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 21.348039] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 21.348164] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 173.14.09 Wed Jun 4 23:40:50 PDT 2008
[ 35.047454] CPU0 attaching NULL sched-domain.
[ 35.047464] CPU1 attaching NULL sched-domain.
[ 35.061893] CPU0 attaching sched-domain:
[ 35.061901] domain 0: span 00000003
[ 35.061906] groups: 00000001 00000002
[ 35.061912] domain 1: span 00000003
[ 35.061916] groups: 00000003
[ 35.061922] CPU1 attaching sched-domain:
[ 35.061927] domain 0: span 00000003
[ 35.061932] groups: 00000002 00000001
[ 35.061942] domain 1: span 00000003
[ 35.061948] groups: 00000003
[ 40.150671] eth0: no IPv6 routers present
[ 40.539955] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 40.540063] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100102, writing 40100106)
[ 40.551580] iwl4965: iwlwifi-4965-1.ucode firmware file req failed: Reason -2
[ 40.551590] iwl4965: Could not read microcode: -2
[ 40.551712] ACPI: PCI interrupt for device 0000:02:00.0 disabled
[ 54.785511] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 54.785623] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100102, writing 40100106)
[ 54.794402] iwl4965: iwlwifi-4965-1.ucode firmware file req failed: Reason -2
[ 54.794413] iwl4965: Could not read microcode: -2
[ 54.794491] ACPI: PCI interrupt for device 0000:02:00.0 disabled
[ 69.867420] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 69.867535] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100102, writing 40100106)
[ 69.878576] iwl4965: iwlwifi-4965-1.ucode firmware file req failed: Reason -2
[ 69.878580] iwl4965: Could not read microcode: -2
[ 69.878638] ACPI: PCI interrupt for device 0000:02:00.0 disabled
[ 83.991651] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 83.991765] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100102, writing 40100106)
[ 84.003205] iwl4965: iwlwifi-4965-1.ucode firmware file req failed: Reason -2
[ 84.003216] iwl4965: Could not read microcode: -2
[ 84.003294] ACPI: PCI interrupt for device 0000:02:00.0 disabled
[ 92.037272] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 92.037386] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100102, writing 40100106)
[ 92.048802] iwl4965: iwlwifi-4965-1.ucode firmware file req failed: Reason -2
[ 92.048813] iwl4965: Could not read microcode: -2
[ 92.048889] ACPI: PCI interrupt for device 0000:02:00.0 disabled
[ 106.318706] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 106.318822] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100102, writing 40100106)
[ 106.330317] iwl4965: iwlwifi-4965-1.ucode firmware file req failed: Reason -2
[ 106.330329] iwl4965: Could not read microcode: -2
[ 106.330406] ACPI: PCI interrupt for device 0000:02:00.0 disabled
[ 120.620132] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 120.620249] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100102, writing 40100106)
[ 120.631803] iwl4965: iwlwifi-4965-1.ucode firmware file req failed: Reason -2
[ 120.631814] iwl4965: Could not read microcode: -2
[ 120.631934] ACPI: PCI interrupt for device 0000:02:00.0 disabled
[ 184.505521] hub 2-0:1.0: unable to enumerate USB device on port 6
[ 184.710722] usb 7-2: new full speed USB device using uhci_hcd and address 2
[ 184.853834] usb 7-2: configuration #1 chosen from 1 choice
[ 184.854845] usb 7-2: New USB device found, idVendor=03f0, idProduct=171d
[ 184.854855] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 184.854860] usb 7-2: Product: HP Integrated Module
[ 184.854864] usb 7-2: Manufacturer: Broadcom Corp
[ 184.970802] Bluetooth: HCI USB driver ver 2.9
[ 184.972379] usbcore: registered new interface driver hci_usb
[ 222.418318] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 222.418433] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100102, writing 40100106)
[ 222.429793] iwl4965: iwlwifi-4965-1.ucode firmware file req failed: Reason -2
[ 222.429804] iwl4965: Could not read microcode: -2
[ 222.429880] ACPI: PCI interrupt for device 0000:02:00.0 disabled
Kod: Zaznacz cały
dzidzia:/home/dzidzia# lspci -v
07:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) (prog-if 10)
Subsystem: Hewlett-Packard Company Device 30cc
Flags: bus master, medium devsel, latency 32, IRQ 20
Memory at f8100000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [dc] Power Management version 2
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci
07:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
Subsystem: Hewlett-Packard Company Device 30cc
Flags: bus master, medium devsel, latency 32, IRQ 21
Memory at f8100800 (32-bit, non-prefetchable) [size=200]
Capabilities: [80] Power Management version 2
Kernel driver in use: sdhci
Kernel modules: sdhci
07:09.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
Subsystem: Hewlett-Packard Company Device 30cc
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at f8100c00 (32-bit, non-prefetchable) [size=200]
Capabilities: [80] Power Management version 2
Kernel driver in use: ricoh-mmc
Kernel modules: ricoh_mmc
07:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
Subsystem: Hewlett-Packard Company Device 30cc
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at f8101000 (32-bit, non-prefetchable) [size=200]
Capabilities: [80] Power Management version 2
07:09.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff) (prog-if ff)
!!! Unknown header type 7f
Kod: Zaznacz cały
fdisk -lKod: Zaznacz cały
/dev/sdxKod: Zaznacz cały
mkdir /media/cardKod: Zaznacz cały
mount /dev/sdx1 /media/cardKod: Zaznacz cały
/media/cardKod: Zaznacz cały
dzidzia:/home/dzidzia# fdisk -l
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x2bdc2bdc
Device Boot Start End Blocks Id System
/dev/sda1 * 1 3242 26041333+ 7 HPFS/NTFS
/dev/sda2 3243 30401 218154667+ 5 Extended
/dev/sda5 3243 5825 20747916 83 Linux
/dev/sda6 5826 6143 2554303+ 82 Linux swap / Solaris
/dev/sda7 6144 30401 194852353+ 83 Linux
Disk /dev/sdb: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xafc37ae2
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 30401 244196001 7 HPFS/NTFS