jak dodac interfejs wlan - Atheos - Lenny 2.6.22-3-

[krewetki]

witam,
Jestem zielonym użytkownikiem Lenny (kolega postawił mi na laptopie).
Działało do aktualizacji, podczas której zdecydowałem się zaktualizować te z błędami o statusie "done". Wówczas stellarium zaczęło się ciąć (dowiedziałem się od niego, że problem z openGL) oraz - klu programu - nie działa sieciówka. widzę komunikat (KDE):

http://img135.imageshack.us/img135/3753 ... wp5.th.jpg

a kiedyś to wyglądało tak:

http://img213.imageshack.us/img213/543/ ... pl1.th.jpg

chyba nie muszę dodawać, że oczywiście pod Windows Cukierek mi działa, a ja Windows nie lubię i nie chce!

Poczytałem trochę forum (tak, zacząłem od faq i tipsów) i niestety nic mi nie pasuje, więc ośmielam się zapytać, tylko proszę o łopatologiczne odpowiedzi. Naprawdę, uprzedzając pytania podaje co następuje:

ifconfig (kiedyś miałem tu również wlan0, a teraz go nie ma)

Kod: Zaznacz cały

chameleon:~# ifconfig
eth0      Link encap:Ethernet  HWaddr 00:1e:8c:23:99:56 
UP BROADCAST MULTICAST  MTU:1500  Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
Interrupt:16 Base address:0xd400


lo        Link encap:Local Loopback
inet addr:127.0.0.1  Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING  MTU:16436  Metric:1
RX packets:62 errors:0 dropped:0 overruns:0 frame:0
TX packets:62 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:4192 (4.0 KiB)  TX bytes:4192 (4.0 KiB)

lspci

Kod: Zaznacz cały

chameleon:~# lspci
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 671MX
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS968 [MuTIOL Media IO] (rev 01)
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01)
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:05.0 IDE interface: Silicon Integrated Systems [SiS] SATA Controller / IDE mode (rev 03)
00:06.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge
00:07.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge
00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:0f.0 Audio device: Silicon Integrated Systems [SiS] Azalia Audio Controller
01:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon X2300
02:00.0 Ethernet controller: Atheros Communications, Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01)

zawartość pliku /etc/network/interfaces

Kod: Zaznacz cały

# The loopback network interface
auto lo
iface lo inet loopback

iface wlan0 inet dhcp
address 10.76.76.220
netmask 255.255.255.192
gateway 10.76.76.193
wireless-essid WiFi Zone - The Cloud

auto wlan0

zawartość /etc/apt/sources.list

Kod: Zaznacz cały

deb [url]http://security.debian.org/[/url] lenny/updates main contrib non-free
deb-src [url]http://security.debian.org/[/url] lenny/updates main contrib non-free
# Lenny:
deb [url]ftp://ftp.pl.debian.org/debian/[/url] lenny main non-free contrib
deb-src [url]ftp://ftp.pl.debian.org/debian/[/url] lenny main non-free contrib
# Sources from [url]www.apt-get.org[/url]
# Opera Browser - Production release
deb [url]http://deb.opera.com/opera/[/url] lenny non-free
# WineHQ - Debian 4.0 "Etch"
deb [url]http://wine.budgetdedicated.com/apt[/url] etch main
deb-src [url]http://wine.budgetdedicated.com/apt[/url] etch main
# Other sources
# Christian Marillat's Mult-Media Repository for Lenny
deb [url]http://www.debian-multimedia.org[/url] lenny main

może głupio, ale próbowałem tak

Kod: Zaznacz cały

chameleon:~# ifconfig wlan0
wlan0: error fetching interface information: Device not found
chameleon:~#

Jakoś mało mnie to dziwi. Tylko nie wiem co zrobić. Proszę o pomoc.

.

[pavbaranov]

Po co kompilujesz, jest paczka. HOWTO - znajdziesz na forum w odpowiednim dziale.
Twój problem, jest związany z tym, że po aktualizacji, prawdopodobnie zaktualizowałeś również jądro, a to nie ma madwifi. Trzeba je ponownie tam wrzucić np. używając (bo wygodrnie) programu module-assistant. Masz też w nowym (tj. 2.6.24) jądrze moduł ath5k, który obsługuje Atherosa (nie wiem, którego masz, ale może akurat tego). HOWTO jest na stronie ath5k.
Jeśli pozostawiłeś sobie stare jądro, to jeśli odpalisz debiana na starym jądrze, będziesz mieć wifi.

[tydell]

ściągasz paczke ze strony madwifi, rozpakowujesz i wchodzisz do rozpakowanego katalogu
instalujesz wg info zawartego w pliku INSTALL, czli po kolei wpisujesz w terminalu jako root

Kod: Zaznacz cały

./configure

Kod: Zaznacz cały

make

Kod: Zaznacz cały

make install

tak to chyba leciało
potem ładujesz moduł do jądra czyli dajesz polecenie

Kod: Zaznacz cały

modprobe ath_pci

, wtedy doda Ci bezprzewodówke, z reguły wlan0

jeżeli nie ma interfejsu ath0 to w zalezności co chcesz na nim zrobic dajesz odpowiednio

Kod: Zaznacz cały

To create an access point, use:

  wlanconfig ath0 create wlandev wifi0 wlanmode ap

To create an access point and a station, use:

  wlanconfig ath0 create wlandev wifi0 wlanmode ap
  wlanconfig ath1 create wlandev wifi0 wlanmode sta nosbeacon

To create APs that share a single MAC address, use the -bssid flag when
creating the VAPs:

  wlanconfig ath0 create wlandev wifi0 wlanmode ap -bssid
  wlanconfig ath1 create wlandev wifi0 wlanmode ap -bssid

Finally, to destroy a VAP, issue the command:

  wlanconfig ath0 destroy

i tylko tyle, zeby atheros dzialal na madwifi to tylko 3 polecenia, a to wszytsko w readme i w pliku install jakie znajduja sie w sciagnietej paczce

powodzenia

[ulek]

Ja instalowałem tą kartę na Etchu ale nie uważam, że środowisko Lennego jest bardzije kłopotliwe. Wszystkich zainteresowanych odsyłam na moją stronę, gdzie zamieściłem proces instalacji "krok po kroku".

http://ulek.ovh.org/index.php?show=weblog&id=11

Zapraszam i pozdrawiam.

[krewetki]

Zrobilem wszystko zgodnie z howto@forum + readme czyli:

Kod: Zaznacz cały

chameleon:~# m-a prepare
chameleon:~# m-a a-i madwifi
chameleon:~# modprobe ath_pci

Ciekawe dla mnie bylo to:

Kod: Zaznacz cały

chameleon:~# echo ath_pci >> /etc/modules
chameleon:~#

Czy nie powinno czegos wyrzucic?

W kazdym razie na koniec:

Kod: Zaznacz cały

chameleon:~# wlanconfig ath0 create wlandev wifi0 wlanmode ap
wlanconfig: ioctl: No such device
chameleon:~#

Co to znaczy?

Dodam, ze w iksach widze to:

czyli mam modemowe, kablowe a radiowego nie.
i co teraz?

btw1: czy jesli chce sie polaczyc z ktoryms z dostepnych AP (workstation do sieci, nic poza tym, nie chce by moj laptop byl APkiem) to dobrze robie

Kod: Zaznacz cały

wlanconfig ath0 create wlandev wifi0 wlanmode ap

Czy powinienem cos innego?

Twój problem, jest związany z tym, że po aktualizacji, prawdopodobnie zaktualizowałeś również jądro, a to nie ma madwifi.

btw2: miales racje - na starym jadrze wifi dziala. ale w nowym jadrze modul jest. jak zapewne sie domyslasz probowalem go zaladowac przy pomocy module-assistant i cukierek...
Dodam jeszcze, ze ani madwifi ani ath5k nie moge uruchomic. stare jadro dziala na podpietych sterownikach windowsowych. nie ukrywam, ze bardzo zalezy mi na linuksowych, bo potrzebuje skorzystac z aircracka (oczywiscie w celach naukowo-badawczych ;P), a pierwszym krokiem jest tzw. tryb nasluchu.

[tydell]

ja normalnie zainstalowałem stery madwifi wg readme które zawiera, czyli to co podałem wyżej i działa
bez żadnego madwifi prepare itd

[krewetki]

ok, zainstalowalem z instalki - wersja:
#define RELEASE_VERSION "0.9.4"

caly kod z kompilacji i instalacji wyglada tak:

Kod: Zaznacz cały

chameleon:~# lspci
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 671MX
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS968 [MuTIOL Media IO] (rev 01)
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01)
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:05.0 IDE interface: Silicon Integrated Systems [SiS] SATA Controller / IDE mode (rev 03)
00:06.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge
00:07.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge
00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:0f.0 Audio device: Silicon Integrated Systems [SiS] Azalia Audio Controller
01:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon X2300
02:00.0 Ethernet controller: Atheros Communications, Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01)
chameleon:~# rmmod ath_pci
chameleon:~# rmmod ndiswrapper
ERROR: Module ndiswrapper does not exist in /proc/modules
chameleon:~# depmod -ea
chameleon:~# cd /var/tmp/madwifi_instalka
chameleon:/var/tmp/madwifi_instalka# make
Checking requirements... ok.
Checking kernel configuration... ok.
make -C /lib/modules/2.6.24-1-486/build SUBDIRS=/var/tmp/madwifi_instalka modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.24-1-486'
  CC [M]  /var/tmp/madwifi_instalka/ath/if_ath.o
  CC [M]  /var/tmp/madwifi_instalka/ath/if_ath_pci.o
  LD [M]  /var/tmp/madwifi_instalka/ath/ath_pci.o
  CC [M]  /var/tmp/madwifi_instalka/ath_hal/ah_os.o
  HOSTCC  /var/tmp/madwifi_instalka/ath_hal/uudecode
  UUDECODE /var/tmp/madwifi_instalka/ath_hal/i386-elf.hal.o
  LD [M]  /var/tmp/madwifi_instalka/ath_hal/ath_hal.o
  CC [M]  /var/tmp/madwifi_instalka/ath_rate/amrr/amrr.o
  LD [M]  /var/tmp/madwifi_instalka/ath_rate/amrr/ath_rate_amrr.o
  CC [M]  /var/tmp/madwifi_instalka/ath_rate/minstrel/minstrel.o
  LD [M]  /var/tmp/madwifi_instalka/ath_rate/minstrel/ath_rate_minstrel.o
  CC [M]  /var/tmp/madwifi_instalka/ath_rate/onoe/onoe.o
  LD [M]  /var/tmp/madwifi_instalka/ath_rate/onoe/ath_rate_onoe.o
  CC [M]  /var/tmp/madwifi_instalka/ath_rate/sample/sample.o
  LD [M]  /var/tmp/madwifi_instalka/ath_rate/sample/ath_rate_sample.o
  CC [M]  /var/tmp/madwifi_instalka/net80211/if_media.o
  CC [M]  /var/tmp/madwifi_instalka/net80211/ieee80211.o
  CC [M]  /var/tmp/madwifi_instalka/net80211/ieee80211_beacon.o
  CC [M]  /var/tmp/madwifi_instalka/net80211/ieee80211_crypto.o
  CC [M]  /var/tmp/madwifi_instalka/net80211/ieee80211_crypto_none.o
  CC [M]  /var/tmp/madwifi_instalka/net80211/ieee80211_input.o
  CC [M]  /var/tmp/madwifi_instalka/net80211/ieee80211_node.o
  CC [M]  /var/tmp/madwifi_instalka/net80211/ieee80211_output.o
  CC [M]  /var/tmp/madwifi_instalka/net80211/ieee80211_power.o
  CC [M]  /var/tmp/madwifi_instalka/net80211/ieee80211_proto.o
  CC [M]  /var/tmp/madwifi_instalka/net80211/ieee80211_scan.o
  CC [M]  /var/tmp/madwifi_instalka/net80211/ieee80211_wireless.o
  CC [M]  /var/tmp/madwifi_instalka/net80211/ieee80211_linux.o
  CC [M]  /var/tmp/madwifi_instalka/net80211/ieee80211_monitor.o
  CC [M]  /var/tmp/madwifi_instalka/net80211/ieee80211_rate.o
  CC [M]  /var/tmp/madwifi_instalka/net80211/ieee80211_acl.o
  CC [M]  /var/tmp/madwifi_instalka/net80211/ieee80211_crypto_ccmp.o
  CC [M]  /var/tmp/madwifi_instalka/net80211/ieee80211_scan_ap.o
  CC [M]  /var/tmp/madwifi_instalka/net80211/ieee80211_scan_sta.o
  CC [M]  /var/tmp/madwifi_instalka/net80211/ieee80211_crypto_tkip.o
  CC [M]  /var/tmp/madwifi_instalka/net80211/ieee80211_crypto_wep.o
  CC [M]  /var/tmp/madwifi_instalka/net80211/ieee80211_xauth.o
  LD [M]  /var/tmp/madwifi_instalka/net80211/wlan.o
  LD [M]  /var/tmp/madwifi_instalka/net80211/wlan_wep.o
  LD [M]  /var/tmp/madwifi_instalka/net80211/wlan_tkip.o
  LD [M]  /var/tmp/madwifi_instalka/net80211/wlan_ccmp.o
  LD [M]  /var/tmp/madwifi_instalka/net80211/wlan_acl.o
  LD [M]  /var/tmp/madwifi_instalka/net80211/wlan_xauth.o
  LD [M]  /var/tmp/madwifi_instalka/net80211/wlan_scan_sta.o
  LD [M]  /var/tmp/madwifi_instalka/net80211/wlan_scan_ap.o
  Building modules, stage 2.
  MODPOST 14 modules
  CC      /var/tmp/madwifi_instalka/ath/ath_pci.mod.o
  LD [M]  /var/tmp/madwifi_instalka/ath/ath_pci.ko
  CC      /var/tmp/madwifi_instalka/ath_hal/ath_hal.mod.o
  LD [M]  /var/tmp/madwifi_instalka/ath_hal/ath_hal.ko
  CC      /var/tmp/madwifi_instalka/ath_rate/amrr/ath_rate_amrr.mod.o
  LD [M]  /var/tmp/madwifi_instalka/ath_rate/amrr/ath_rate_amrr.ko
  CC      /var/tmp/madwifi_instalka/ath_rate/minstrel/ath_rate_minstrel.mod.o
  LD [M]  /var/tmp/madwifi_instalka/ath_rate/minstrel/ath_rate_minstrel.ko
  CC      /var/tmp/madwifi_instalka/ath_rate/onoe/ath_rate_onoe.mod.o
  LD [M]  /var/tmp/madwifi_instalka/ath_rate/onoe/ath_rate_onoe.ko
  CC      /var/tmp/madwifi_instalka/ath_rate/sample/ath_rate_sample.mod.o
  LD [M]  /var/tmp/madwifi_instalka/ath_rate/sample/ath_rate_sample.ko
  CC      /var/tmp/madwifi_instalka/net80211/wlan.mod.o
  LD [M]  /var/tmp/madwifi_instalka/net80211/wlan.ko
  CC      /var/tmp/madwifi_instalka/net80211/wlan_acl.mod.o
  LD [M]  /var/tmp/madwifi_instalka/net80211/wlan_acl.ko
  CC      /var/tmp/madwifi_instalka/net80211/wlan_ccmp.mod.o
  LD [M]  /var/tmp/madwifi_instalka/net80211/wlan_ccmp.ko
  CC      /var/tmp/madwifi_instalka/net80211/wlan_scan_ap.mod.o
  LD [M]  /var/tmp/madwifi_instalka/net80211/wlan_scan_ap.ko
  CC      /var/tmp/madwifi_instalka/net80211/wlan_scan_sta.mod.o
  LD [M]  /var/tmp/madwifi_instalka/net80211/wlan_scan_sta.ko
  CC      /var/tmp/madwifi_instalka/net80211/wlan_tkip.mod.o
  LD [M]  /var/tmp/madwifi_instalka/net80211/wlan_tkip.ko
  CC      /var/tmp/madwifi_instalka/net80211/wlan_wep.mod.o
  LD [M]  /var/tmp/madwifi_instalka/net80211/wlan_wep.ko
  CC      /var/tmp/madwifi_instalka/net80211/wlan_xauth.mod.o
  LD [M]  /var/tmp/madwifi_instalka/net80211/wlan_xauth.ko
make[1]: Leaving directory `/usr/src/linux-headers-2.6.24-1-486'
make -C ./tools  all || exit 1
make[1]: Entering directory `/var/tmp/madwifi_instalka/tools'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/var/tmp/madwifi_instalka/tools'
chameleon:/var/tmp/madwifi_instalka# make install
sh scripts/find-madwifi-modules.sh 2.6.24-1-486 

WARNING:
It seems that there are modules left from previous MadWifi installations.
If you are unistalling the MadWifi modules please press "r" to remove them.
If you are installing new MadWifi modules, you should consider removing those
already installed, or else you may experience problems during operation.
Remove old modules?

[l]ist, [r]emove, [i]gnore or e[x]it (l,r,i,[x]) ? 
r
for i in ath/ ath_hal/ ath_rate/ net80211/; do \
		make -C $i install || exit 1; \
	done
make[1]: Entering directory `/var/tmp/madwifi_instalka/ath'
test -d //lib/modules/2.6.24-1-486/net || mkdir -p //lib/modules/2.6.24-1-486/net
install ath_pci.ko //lib/modules/2.6.24-1-486/net
make[1]: Leaving directory `/var/tmp/madwifi_instalka/ath'
make[1]: Entering directory `/var/tmp/madwifi_instalka/ath_hal'
test -d //lib/modules/2.6.24-1-486/net || mkdir -p //lib/modules/2.6.24-1-486/net
install ath_hal.ko //lib/modules/2.6.24-1-486/net
make[1]: Leaving directory `/var/tmp/madwifi_instalka/ath_hal'
make[1]: Entering directory `/var/tmp/madwifi_instalka/ath_rate'
for i in amrr/ onoe/ sample/ minstrel/; do \
		make -C $i install || exit 1; \
	done
make[2]: Entering directory `/var/tmp/madwifi_instalka/ath_rate/amrr'
test -d //lib/modules/2.6.24-1-486/net || mkdir -p //lib/modules/2.6.24-1-486/net
install ath_rate_amrr.ko //lib/modules/2.6.24-1-486/net
make[2]: Leaving directory `/var/tmp/madwifi_instalka/ath_rate/amrr'
make[2]: Entering directory `/var/tmp/madwifi_instalka/ath_rate/onoe'
test -d //lib/modules/2.6.24-1-486/net || mkdir -p //lib/modules/2.6.24-1-486/net
install ath_rate_onoe.ko //lib/modules/2.6.24-1-486/net
make[2]: Leaving directory `/var/tmp/madwifi_instalka/ath_rate/onoe'
make[2]: Entering directory `/var/tmp/madwifi_instalka/ath_rate/sample'
test -d //lib/modules/2.6.24-1-486/net || mkdir -p //lib/modules/2.6.24-1-486/net
install ath_rate_sample.ko //lib/modules/2.6.24-1-486/net
make[2]: Leaving directory `/var/tmp/madwifi_instalka/ath_rate/sample'
make[2]: Entering directory `/var/tmp/madwifi_instalka/ath_rate/minstrel'
test -d //lib/modules/2.6.24-1-486/net || mkdir -p //lib/modules/2.6.24-1-486/net
cp ath_rate_minstrel.ko //lib/modules/2.6.24-1-486/net
make[2]: Leaving directory `/var/tmp/madwifi_instalka/ath_rate/minstrel'
make[1]: Leaving directory `/var/tmp/madwifi_instalka/ath_rate'
make[1]: Entering directory `/var/tmp/madwifi_instalka/net80211'
test -d //lib/modules/2.6.24-1-486/net || mkdir -p //lib/modules/2.6.24-1-486/net
for i in wlan.o wlan_wep.o wlan_tkip.o wlan_ccmp.o wlan_acl.o wlan_xauth.o wlan_scan_sta.o wlan_scan_ap.o; do \
		f=`basename $i .o`; \
		install $f.ko //lib/modules/2.6.24-1-486/net; \
	done
make[1]: Leaving directory `/var/tmp/madwifi_instalka/net80211'
(export KMODPATH=/lib/modules/2.6.24-1-486/net; /sbin/depmod -ae 2.6.24-1-486)
make -C ./tools  install || exit 1
make[1]: Entering directory `/var/tmp/madwifi_instalka/tools'
install -d /usr/local/bin
for i in athstats 80211stats athkey athchans athctrl athdebug 80211debug wlanconfig ath_info; do \
		install $i /usr/local/bin/$i; \
		strip /usr/local/bin/$i; \
	done
install -d /usr/local/man/man8
install -m 0644 man/*.8 /usr/local/man/man8
make[1]: Leaving directory `/var/tmp/madwifi_instalka/tools'
chameleon:/var/tmp/madwifi_instalka# make install
sh scripts/find-madwifi-modules.sh 2.6.24-1-486 

WARNING:
It seems that there are modules left from previous MadWifi installations.
If you are unistalling the MadWifi modules please press "r" to remove them.
If you are installing new MadWifi modules, you should consider removing those
already installed, or else you may experience problems during operation.
Remove old modules?

[l]ist, [r]emove, [i]gnore or e[x]it (l,r,i,[x]) ? 
i
for i in ath/ ath_hal/ ath_rate/ net80211/; do \
		make -C $i install || exit 1; \
	done
make[1]: Entering directory `/var/tmp/madwifi_instalka/ath'
test -d //lib/modules/2.6.24-1-486/net || mkdir -p //lib/modules/2.6.24-1-486/net
install ath_pci.ko //lib/modules/2.6.24-1-486/net
make[1]: Leaving directory `/var/tmp/madwifi_instalka/ath'
make[1]: Entering directory `/var/tmp/madwifi_instalka/ath_hal'
test -d //lib/modules/2.6.24-1-486/net || mkdir -p //lib/modules/2.6.24-1-486/net
install ath_hal.ko //lib/modules/2.6.24-1-486/net
make[1]: Leaving directory `/var/tmp/madwifi_instalka/ath_hal'
make[1]: Entering directory `/var/tmp/madwifi_instalka/ath_rate'
for i in amrr/ onoe/ sample/ minstrel/; do \
		make -C $i install || exit 1; \
	done
make[2]: Entering directory `/var/tmp/madwifi_instalka/ath_rate/amrr'
test -d //lib/modules/2.6.24-1-486/net || mkdir -p //lib/modules/2.6.24-1-486/net
install ath_rate_amrr.ko //lib/modules/2.6.24-1-486/net
make[2]: Leaving directory `/var/tmp/madwifi_instalka/ath_rate/amrr'
make[2]: Entering directory `/var/tmp/madwifi_instalka/ath_rate/onoe'
test -d //lib/modules/2.6.24-1-486/net || mkdir -p //lib/modules/2.6.24-1-486/net
install ath_rate_onoe.ko //lib/modules/2.6.24-1-486/net
make[2]: Leaving directory `/var/tmp/madwifi_instalka/ath_rate/onoe'
make[2]: Entering directory `/var/tmp/madwifi_instalka/ath_rate/sample'
test -d //lib/modules/2.6.24-1-486/net || mkdir -p //lib/modules/2.6.24-1-486/net
install ath_rate_sample.ko //lib/modules/2.6.24-1-486/net
make[2]: Leaving directory `/var/tmp/madwifi_instalka/ath_rate/sample'
make[2]: Entering directory `/var/tmp/madwifi_instalka/ath_rate/minstrel'
test -d //lib/modules/2.6.24-1-486/net || mkdir -p //lib/modules/2.6.24-1-486/net
cp ath_rate_minstrel.ko //lib/modules/2.6.24-1-486/net
make[2]: Leaving directory `/var/tmp/madwifi_instalka/ath_rate/minstrel'
make[1]: Leaving directory `/var/tmp/madwifi_instalka/ath_rate'
make[1]: Entering directory `/var/tmp/madwifi_instalka/net80211'
test -d //lib/modules/2.6.24-1-486/net || mkdir -p //lib/modules/2.6.24-1-486/net
for i in wlan.o wlan_wep.o wlan_tkip.o wlan_ccmp.o wlan_acl.o wlan_xauth.o wlan_scan_sta.o wlan_scan_ap.o; do \
		f=`basename $i .o`; \
		install $f.ko //lib/modules/2.6.24-1-486/net; \
	done
make[1]: Leaving directory `/var/tmp/madwifi_instalka/net80211'
(export KMODPATH=/lib/modules/2.6.24-1-486/net; /sbin/depmod -ae 2.6.24-1-486)
make -C ./tools  install || exit 1
make[1]: Entering directory `/var/tmp/madwifi_instalka/tools'
install -d /usr/local/bin
for i in athstats 80211stats athkey athchans athctrl athdebug 80211debug wlanconfig ath_info; do \
		install $i /usr/local/bin/$i; \
		strip /usr/local/bin/$i; \
	done
install -d /usr/local/man/man8
install -m 0644 man/*.8 /usr/local/man/man8
make[1]: Leaving directory `/var/tmp/madwifi_instalka/tools'
chameleon:/var/tmp/madwifi_instalka# modprobe ath_pci
chameleon:/var/tmp/madwifi_instalka# modinfo ath_pci
filename:       /lib/modules/2.6.24-1-486/net/ath_pci.ko
license:        Dual BSD/GPL
version:        0.9.4
description:    Support for Atheros 802.11 wireless LAN cards.
author:         Errno Consulting, Sam Leffler
srcversion:     95EC89B6884FCEE1B4EED63
alias:          pci:v0000168Cd00009013sv*sd*bc*sc*i*
alias:          pci:v0000168Cd0000001Dsv*sd*bc*sc*i*
alias:          pci:v0000168Cd0000001Csv*sd*bc*sc*i*
alias:          pci:v0000168Cd0000001Bsv*sd*bc*sc*i*
alias:          pci:v0000168Cd0000001Asv*sd*bc*sc*i*
alias:          pci:v0000168Cd00000019sv*sd*bc*sc*i*
alias:          pci:v0000168Cd00000018sv*sd*bc*sc*i*
alias:          pci:v0000168Cd00000017sv*sd*bc*sc*i*
alias:          pci:v0000168Cd00000016sv*sd*bc*sc*i*
alias:          pci:v0000168Cd00000015sv*sd*bc*sc*i*
alias:          pci:v0000168Cd0000101Asv*sd*bc*sc*i*
alias:          pci:v0000168Cd00001014sv*sd*bc*sc*i*
alias:          pci:v000010B7d00000013sv*sd*bc*sc*i*
alias:          pci:v0000A727d00000013sv*sd*bc*sc*i*
alias:          pci:v0000168Cd00000013sv*sd*bc*sc*i*
alias:          pci:v0000168Cd00000012sv*sd*bc*sc*i*
alias:          pci:v0000168Cd00000007sv*sd*bc*sc*i*
depends:        ath_hal,wlan
vermagic:       2.6.24-1-486 mod_unload 486 
parm:           countrycode:Override default country code (int)
parm:           outdoor:Enable/disable outdoor use (int)
parm:           xchanmode:Enable/disable extended channel mode (int)
parm:           rfkill:Enable/disable RFKILL capability (int)
parm:           autocreate:Create ath device in [sta|ap|wds|adhoc|ahdemo|monitor] mode. defaults to sta, use 'none' to disable (charp)
parm:           ratectl:Rate control algorithm [amrr|minstrel|onoe|sample], defaults to 'sample' (charp)
parm:           ath_debug:Load-time debug output enable (int)
chameleon:/var/tmp/madwifi_instalka# lspci
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 671MX
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS968 [MuTIOL Media IO] (rev 01)
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01)
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:05.0 IDE interface: Silicon Integrated Systems [SiS] SATA Controller / IDE mode (rev 03)
00:06.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge
00:07.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge
00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:0f.0 Audio device: Silicon Integrated Systems [SiS] Azalia Audio Controller
01:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon X2300
02:00.0 Ethernet controller: Atheros Communications, Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01)
chameleon:/var/tmp/madwifi_instalka# iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

chameleon:/var/tmp/madwifi_instalka# wlanconfig ath0 create wlandev wifi0 wlanmode ap 
wlanconfig: ioctl: No such device
chameleon:/var/tmp/madwifi_instalka#

po prostu nie wiem co dalej.
nie rozumiem, dlaczego nie mam ath0 lub wifi0
dodam, ze na starszym jadrze tez nie moge tego zainstalowac madwifi ani ath5k wiec jade na windowsowych.
czy ktokolwiek wogole wie co zrobic dalej? wiem, ze problem jest moze nietypowy, ale wierze, ze sa tutaj specjalisci. gdyby bylo inaczej, to poszukalbym na forum dody-elektrody

[ Dodano: 2008-05-17, 20:47 ]
sterownik chyba poprawnie zainstalowany bo:

Kod: Zaznacz cały

chameleon:# lspci
02:00.0 Ethernet controller: Atheros Communications, Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01)

[ Dodano: 2008-05-17, 20:55 ]
sterowniki zainstalowalem, ale nie moge postawic interfejsu.

przy starcie widze cos takiego:

Kod: Zaznacz cały

ath0: ERROR while gettin interface flags: No such device

wersja sterownika 0.9.4 a moja karta:

Kod: Zaznacz cały

chameleon:~# lspci
02:00.0 Ethernet controller: Atheros Communications, Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01)
chameleon:~#

czy ktos wie jak ten interfejs wlan0 albo ath0 postawic? jak bylo a jak jest widac w skrinszotach powyzej.
prosze o pomoc.