Polski portal użytkowników dystrybucji Debian GNU/Linux, dyskusje, artykuły, nowości, blog, porady, pomoc.
https://www.debian.pl/
Kod: Zaznacz cały
dmesgKod: Zaznacz cały
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000005fffc000 (usable)
[ 0.000000] BIOS-e820: 000000005fffc000 - 000000005ffff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000005ffff000 - 0000000060000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: System Manufacturer System Name/A7V8X-X, BIOS ASUS A7V8X-X ACPI BIOS Revision 1014 Beta 002 06/23/2005
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x5fffc max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 040000000 mask FE0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 base 0F8000000 mask FFC000000 write-combining
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01a00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037800000 page 2M
[ 0.000000] 0037800000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 19f9000-1a00000
[ 0.000000] RAMDISK: 36c86000 - 3763b000
[ 0.000000] ACPI: RSDP 000f5e20 00014 (v00 ASUS )
[ 0.000000] ACPI: RSDT 5fffc000 00030 (v01 ASUS A7V8X-X 42302E31 MSFT 31313031)
[ 0.000000] ACPI: FACP 5fffc0b2 00074 (v01 ASUS A7V8X-X 42302E31 MSFT 31313031)
[ 0.000000] ACPI: DSDT 5fffc126 02A13 (v01 ASUS A7V8X-X 00001000 MSFT 0100000B)
[ 0.000000] ACPI: FACS 5ffff000 00040
[ 0.000000] ACPI: BOOT 5fffc030 00028 (v01 ASUS A7V8X-X 42302E31 MSFT 31313031)
[ 0.000000] ACPI: APIC 5fffc058 0005A (v01 ASUS A7V8X-X 42302E31 MSFT 31313031)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 645MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x0005fffc
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0005fffc
[ 0.000000] On node 0 totalpages: 393099
[ 0.000000] free_area_init_node: node 0, pgdat c1412800, node_mem_map f6086200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221994 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1292 pages used for memmap
[ 0.000000] HighMem zone: 164082 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0xe408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 60000000 (gap: 60000000:9ec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f79e6000 s33280 r0 d24064 u57344
[ 0.000000] pcpu-alloc: s33280 r0 d24064 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 390027
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=293489e5-df2d-4f94-b81c-e8a252d324a5 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:0005fffc)
[ 0.000000] Memory: 1544040k/1572848k available (2858k kernel code, 28356k reserved, 1342k data, 420k init, 661496k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc141b000 - 0xc1484000 ( 420 kB)
[ 0.000000] .data : 0xc12ca980 - 0xc141a200 (1342 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12ca980 (2858 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=f5c06000 soft=f5c08000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2070.922 MHz processor.
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4141.84 BogoMIPS (lpj=8283688)
[ 0.004010] pid_max: default: 32768 minimum: 301
[ 0.004071] Security Framework initialized
[ 0.004084] AppArmor: AppArmor disabled by boot time parameter
[ 0.004105] Mount-cache hash table entries: 512
[ 0.004327] Initializing cgroup subsys cpuacct
[ 0.004334] Initializing cgroup subsys memory
[ 0.004349] Initializing cgroup subsys devices
[ 0.004353] Initializing cgroup subsys freezer
[ 0.004356] Initializing cgroup subsys net_cls
[ 0.004360] Initializing cgroup subsys blkio
[ 0.004369] Initializing cgroup subsys perf_event
[ 0.004413] mce: CPU supports 4 MCE banks
[ 0.004463] SMP alternatives: switching to UP code
[ 0.006748] Freeing SMP alternatives: 8k freed
[ 0.006756] ACPI: Core revision 20110623
[ 0.011150] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.012437] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.052141] CPU0: AMD Athlon(TM) XP 2600+ stepping 01
[ 0.056003] Performance Events: AMD PMU driver.
[ 0.056003] ... version: 0
[ 0.056003] ... bit width: 48
[ 0.056003] ... generic registers: 4
[ 0.056003] ... value mask: 0000ffffffffffff
[ 0.056003] ... max period: 00007fffffffffff
[ 0.056003] ... fixed-purpose events: 0
[ 0.056003] ... event mask: 000000000000000f
[ 0.056003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.056003] Brought up 1 CPUs
[ 0.056003] Total of 1 processors activated (4141.84 BogoMIPS).
[ 0.056003] devtmpfs: initialized
[ 0.056003] PM: Registering ACPI NVS region at 5ffff000 (4096 bytes)
[ 0.056003] print_constraints: dummy:
[ 0.056003] NET: Registered protocol family 16
[ 0.056003] ACPI: bus type pci registered
[ 0.056003] PCI: PCI BIOS revision 2.10 entry at 0xf1960, last bus=1
[ 0.056003] PCI: Using configuration type 1 for base access
[ 0.056321] bio: create slab <bio-0> at 0
[ 0.056436] ACPI: Added _OSI(Module Device)
[ 0.056439] ACPI: Added _OSI(Processor Device)
[ 0.056442] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.056445] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.057016] ACPI: EC: Look up EC in DSDT
[ 0.061634] ACPI: Interpreter enabled
[ 0.061647] ACPI: (supports S0 S1 S4 S5)
[ 0.061674] ACPI: Using IOAPIC for interrupt routing
[ 0.067458] ACPI: No dock devices found.
[ 0.067462] HEST: Table not found.
[ 0.067470] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.067564] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.067753] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.067758] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.067762] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.067765] pci_root PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff] (ignored)
[ 0.067769] pci_root PNP0A03:00: host bridge window [mem 0x60000000-0xfebfffff] (ignored)
[ 0.067793] pci 0000:00:00.0: [1106:3189] type 0 class 0x000600
[ 0.067805] pci 0000:00:00.0: reg 10: [mem 0xf8000000-0xfbffffff pref]
[ 0.067876] pci 0000:00:01.0: [1106:b168] type 1 class 0x000604
[ 0.067918] pci 0000:00:01.0: supports D1
[ 0.067950] pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03
[ 0.067990] pci 0000:00:10.0: reg 20: [io 0xd800-0xd81f]
[ 0.068041] pci 0000:00:10.0: supports D1 D2
[ 0.068045] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.068069] pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03
[ 0.068109] pci 0000:00:10.1: reg 20: [io 0xd400-0xd41f]
[ 0.068144] pci 0000:00:10.1: supports D1 D2
[ 0.068147] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.068168] pci 0000:00:10.2: [1106:3038] type 0 class 0x000c03
[ 0.068207] pci 0000:00:10.2: reg 20: [io 0xd000-0xd01f]
[ 0.068242] pci 0000:00:10.2: supports D1 D2
[ 0.068245] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.068267] pci 0000:00:10.3: [1106:3104] type 0 class 0x000c03
[ 0.068282] pci 0000:00:10.3: reg 10: [mem 0xed800000-0xed8000ff]
[ 0.068342] pci 0000:00:10.3: supports D1 D2
[ 0.068344] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.068369] pci 0000:00:11.0: [1106:3177] type 0 class 0x000601
[ 0.068424] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.068433] pci 0000:00:11.0: quirk: [io 0xe400-0xe47f] claimed by vt8235 PM
[ 0.068438] pci 0000:00:11.0: quirk: [io 0xe800-0xe80f] claimed by vt8235 SMB
[ 0.068478] pci 0000:00:11.1: [1106:0571] type 0 class 0x000101
[ 0.068520] pci 0000:00:11.1: reg 20: [io 0xb800-0xb80f]
[ 0.068578] pci 0000:00:11.5: [1106:3059] type 0 class 0x000401
[ 0.068593] pci 0000:00:11.5: reg 10: [io 0xe000-0xe0ff]
[ 0.068656] pci 0000:00:11.5: supports D1 D2
[ 0.068678] pci 0000:00:12.0: [1106:3065] type 0 class 0x000200
[ 0.068694] pci 0000:00:12.0: reg 10: [io 0xb400-0xb4ff]
[ 0.068704] pci 0000:00:12.0: reg 14: [mem 0xed000000-0xed0000ff]
[ 0.068759] pci 0000:00:12.0: supports D1 D2
[ 0.068762] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.068815] pci 0000:01:00.0: [10de:0110] type 0 class 0x000300
[ 0.068829] pci 0000:01:00.0: reg 10: [mem 0xee000000-0xeeffffff]
[ 0.068837] pci 0000:01:00.0: reg 14: [mem 0xf0000000-0xf7ffffff pref]
[ 0.068865] pci 0000:01:00.0: reg 30: [mem 0xefff0000-0xefffffff pref]
[ 0.068918] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.068925] pci 0000:00:01.0: bridge window [mem 0xee000000-0xefefffff]
[ 0.068930] pci 0000:00:01.0: bridge window [mem 0xeff00000-0xf7ffffff pref]
[ 0.068938] pci_bus 0000:00: on NUMA node 0
[ 0.068943] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.069199] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.069279] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.071095] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
[ 0.071172] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
[ 0.071245] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
[ 0.071316] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
[ 0.071396] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12)
[ 0.071515] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12)
[ 0.071593] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.071802] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.071806] vgaarb: loaded
[ 0.071808] vgaarb: bridge control possible 0000:01:00.0
[ 0.071885] PCI: Using ACPI for IRQ routing
[ 0.071890] PCI: pci_cache_line_size set to 32 bytes
[ 0.071937] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.071941] reserve RAM buffer: 000000005fffc000 - 000000005fffffff
[ 0.074993] pnp: PnP ACPI init
[ 0.075030] ACPI: bus type pnp registered
[ 0.075204] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.075209] pnp 00:00: [mem 0x000f0000-0x000fffff]
[ 0.075213] pnp 00:00: [mem 0x00100000-0x5fffffff]
[ 0.075216] pnp 00:00: [mem 0xfec00000-0xfec000ff]
[ 0.075219] pnp 00:00: [mem 0xfee00000-0xfee00fff]
[ 0.075306] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.075311] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.075315] system 00:00: [mem 0x00100000-0x5fffffff] could not be reserved
[ 0.075320] system 00:00: [mem 0xfec00000-0xfec000ff] could not be reserved
[ 0.075324] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.075330] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.075629] pnp 00:01: [bus 00-ff]
[ 0.075634] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.075638] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.075641] pnp 00:01: [io 0x0d00-0xffff window]
[ 0.075645] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 0.075648] pnp 00:01: [mem 0x000c8000-0x000dffff window]
[ 0.075651] pnp 00:01: [mem 0x60000000-0xfebfffff window]
[ 0.075722] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.075773] pnp 00:02: [io 0xe400-0xe47f]
[ 0.075777] pnp 00:02: [io 0xe800-0xe81f]
[ 0.075780] pnp 00:02: [mem 0xfff80000-0xffffffff]
[ 0.075783] pnp 00:02: [mem 0xffb80000-0xffbfffff]
[ 0.075842] system 00:02: [io 0xe400-0xe47f] has been reserved
[ 0.075847] system 00:02: [io 0xe800-0xe81f] could not be reserved
[ 0.075851] system 00:02: [mem 0xfff80000-0xffffffff] could not be reserved
[ 0.075855] system 00:02: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.075860] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.075894] pnp 00:03: [io 0x0010-0x001f]
[ 0.075898] pnp 00:03: [io 0x0022-0x002d]
[ 0.075901] pnp 00:03: [io 0x0030-0x003f]
[ 0.075904] pnp 00:03: [io 0x0044-0x005f]
[ 0.075907] pnp 00:03: [io 0x0062-0x0063]
[ 0.075910] pnp 00:03: [io 0x0065-0x006f]
[ 0.075913] pnp 00:03: [io 0x0074-0x007f]
[ 0.075916] pnp 00:03: [io 0x0091-0x0093]
[ 0.075918] pnp 00:03: [io 0x00a2-0x00bf]
[ 0.075921] pnp 00:03: [io 0x00e0-0x00ef]
[ 0.075924] pnp 00:03: [io 0x04d0-0x04d1]
[ 0.075983] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.076025] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.076110] pnp 00:04: [dma 4]
[ 0.076114] pnp 00:04: [io 0x0000-0x000f]
[ 0.076117] pnp 00:04: [io 0x0080-0x0090]
[ 0.076120] pnp 00:04: [io 0x0094-0x009f]
[ 0.076123] pnp 00:04: [io 0x00c0-0x00df]
[ 0.076170] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.076188] pnp 00:05: [io 0x0070-0x0073]
[ 0.076207] pnp 00:05: [irq 8]
[ 0.076251] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.076265] pnp 00:06: [io 0x0061]
[ 0.076308] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.076323] pnp 00:07: [io 0x00f0-0x00ff]
[ 0.076331] pnp 00:07: [irq 13]
[ 0.076376] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.076601] pnp 00:08: [io 0x03f2-0x03f5]
[ 0.076605] pnp 00:08: [io 0x03f7]
[ 0.076613] pnp 00:08: [irq 6]
[ 0.076616] pnp 00:08: [dma 2]
[ 0.076678] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.077267] pnp 00:09: [io 0x0378-0x037f]
[ 0.077274] pnp 00:09: [io 0x0778-0x077b]
[ 0.077282] pnp 00:09: [irq 7]
[ 0.077285] pnp 00:09: [dma 3]
[ 0.077369] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.077782] pnp 00:0a: [io 0x03f8-0x03ff]
[ 0.077791] pnp 00:0a: [irq 4]
[ 0.077871] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.078275] pnp 00:0b: [io 0x0060]
[ 0.078279] pnp 00:0b: [io 0x0064]
[ 0.078286] pnp 00:0b: [irq 1]
[ 0.078333] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.078948] pnp 00:0c: [io 0x0200-0x0207]
[ 0.079008] pnp 00:0c: Plug and Play ACPI device, IDs PNPb02f (active)
[ 0.079038] pnp 00:0d: [io 0x002e-0x002f]
[ 0.079042] pnp 00:0d: [io 0x0290-0x0297]
[ 0.079045] pnp 00:0d: [io 0x0370-0x0375]
[ 0.079106] system 00:0d: [io 0x0290-0x0297] has been reserved
[ 0.079111] system 00:0d: [io 0x0370-0x0375] has been reserved
[ 0.079115] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.079138] pnp: PnP ACPI: found 14 devices
[ 0.079140] ACPI: ACPI bus type pnp unregistered
[ 0.079145] PnPBIOS: Disabled by ACPI PNP
[ 0.116750] Switching to clocksource acpi_pm
[ 0.116786] PCI: max bus depth: 1 pci_try_num: 2
[ 0.116812] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.116822] pci 0000:00:01.0: bridge window [mem 0xee000000-0xefefffff]
[ 0.116827] pci 0000:00:01.0: bridge window [mem 0xeff00000-0xf7ffffff pref]
[ 0.116848] pci 0000:00:01.0: setting latency timer to 64
[ 0.116854] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.116857] pci_bus 0000:00: resource 1 [mem 0x00000000-0x3ffffffff]
[ 0.116861] pci_bus 0000:01: resource 1 [mem 0xee000000-0xefefffff]
[ 0.116865] pci_bus 0000:01: resource 2 [mem 0xeff00000-0xf7ffffff pref]
[ 0.116956] NET: Registered protocol family 2
[ 0.119776] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.119776] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.121572] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.122559] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.122564] TCP reno registered
[ 0.122572] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.122602] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.122789] NET: Registered protocol family 1
[ 0.122815] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.122987] pci 0000:01:00.0: Boot video device
[ 0.122992] PCI: CLS 32 bytes, default 32
[ 0.123096] Unpacking initramfs...
[ 0.462614] Freeing initrd memory: 9940k freed
[ 0.479448] Simple Boot Flag at 0x3a set to 0x1
[ 0.480113] audit: initializing netlink socket (disabled)
[ 0.480137] type=2000 audit(1419683915.480:1): initialized
[ 0.496880] highmem bounce pool size: 64 pages
[ 0.496889] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.497428] VFS: Disk quotas dquot_6.5.2
[ 0.497469] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.497569] msgmni has been set to 1743
[ 0.497805] alg: No test for stdrng (krng)
[ 0.497848] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.497853] io scheduler noop registered
[ 0.497856] io scheduler deadline registered
[ 0.497866] io scheduler cfq registered (default)
[ 0.498010] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.498043] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.498047] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.498417] ERST: Table is not found!
[ 0.498420] GHES: HEST is not enabled!
[ 0.498438] isapnp: Scanning for PnP cards...
[ 0.851730] isapnp: No Plug & Play device found
[ 0.851840] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.872097] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.892724] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.892975] Linux agpgart interface v0.103
[ 0.893141] agpgart: Detected VIA KT400/KT400A/KT600 chipset
[ 0.897254] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[ 0.897420] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.897424] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.898195] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.898367] mousedev: PS/2 mouse device common for all mice
[ 0.898438] rtc_cmos 00:05: RTC can wake from S4
[ 0.898585] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.898634] rtc0: alarms up to one month, 242 bytes nvram
[ 0.898652] cpuidle: using governor ladder
[ 0.898655] cpuidle: using governor menu
[ 0.898972] TCP cubic registered
[ 0.899004] NET: Registered protocol family 10
[ 0.899695] Mobile IPv6
[ 0.899700] NET: Registered protocol family 17
[ 0.899707] Registering the dns_resolver key type
[ 0.899750] Using IPI No-Shortcut mode
[ 0.899907] PM: Hibernation image not present or could not be loaded.
[ 0.899924] registered taskstats version 1
[ 0.900464] rtc_cmos 00:05: setting system clock to 2014-12-27 12:38:36 UTC (1419683916)
[ 0.900520] Initializing network drop monitor service
[ 0.900697] Freeing unused kernel memory: 420k freed
[ 0.901407] Write protecting the kernel text: 2860k
[ 0.901448] Write protecting the kernel read-only data: 1084k
[ 0.917969] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.932322] udevd[44]: starting version 175
[ 1.054783] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[ 1.055577] via-rhine 0000:00:12.0: eth0: VIA Rhine II at 0x1b400, 00:0c:6e:15:e6:58, IRQ 23
[ 1.056332] via-rhine 0000:00:12.0: eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1
[ 1.086880] Floppy drive(s): fd0 is 1.44M
[ 1.092515] usbcore: registered new interface driver usbfs
[ 1.092558] usbcore: registered new interface driver hub
[ 1.111430] usbcore: registered new device driver usb
[ 1.112343] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.119050] ehci_hcd 0000:00:10.3: EHCI Host Controller
[ 1.119104] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
[ 1.119199] ehci_hcd 0000:00:10.3: irq 21, io mem 0xed800000
[ 1.124129] SCSI subsystem initialized
[ 1.136110] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00
[ 1.136179] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.136184] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.136187] usb usb1: Product: EHCI Host Controller
[ 1.136190] usb usb1: Manufacturer: Linux 3.2.0-4-686-pae ehci_hcd
[ 1.136193] usb usb1: SerialNumber: 0000:00:10.3
[ 1.136413] hub 1-0:1.0: USB hub found
[ 1.136422] hub 1-0:1.0: 6 ports detected
[ 1.137185] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.137280] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 1.137303] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 1.137340] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d800
[ 1.137414] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.137418] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.137422] usb usb2: Product: UHCI Host Controller
[ 1.137425] usb usb2: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[ 1.137428] usb usb2: SerialNumber: 0000:00:10.0
[ 1.142578] hub 2-0:1.0: USB hub found
[ 1.142592] hub 2-0:1.0: 2 ports detected
[ 1.142735] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 1.142751] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 1.142787] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d400
[ 1.142849] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.142853] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.142857] usb usb3: Product: UHCI Host Controller
[ 1.142859] usb usb3: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[ 1.142862] usb usb3: SerialNumber: 0000:00:10.1
[ 1.143045] hub 3-0:1.0: USB hub found
[ 1.143052] hub 3-0:1.0: 2 ports detected
[ 1.143144] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 1.143155] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 1.143178] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d000
[ 1.143228] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.143233] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.143236] usb usb4: Product: UHCI Host Controller
[ 1.143239] usb usb4: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[ 1.143242] usb usb4: SerialNumber: 0000:00:10.2
[ 1.143401] hub 4-0:1.0: USB hub found
[ 1.143407] hub 4-0:1.0: 2 ports detected
[ 1.147940] FDC 0 is a post-1991 82077
[ 1.148118] libata version 3.00 loaded.
[ 1.149748] pata_via 0000:00:11.1: version 0.3.4
[ 1.149772] pata_via 0000:00:11.1: can't derive routing for PCI INT A
[ 1.154673] scsi0 : pata_via
[ 1.158401] scsi1 : pata_via
[ 1.159075] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xb800 irq 14
[ 1.159080] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xb808 irq 15
[ 1.324524] ata1.00: native sectors (78165359) is smaller than sectors (78165360)
[ 1.324534] ata1.00: ATA-5: ST340823A, 3.39, max UDMA/100
[ 1.324538] ata1.00: 78165360 sectors, multi 16: LBA
[ 1.340365] ata1.00: configured for UDMA/100
[ 1.340578] scsi 0:0:0:0: Direct-Access ATA ST340823A 3.39 PQ: 0 ANSI: 5
[ 1.507168] Refined TSC clocksource calibration: 2071.022 MHz.
[ 1.507176] Switching to clocksource tsc
[ 1.512332] ata2.01: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL11, max UDMA/33
[ 1.528189] ata2.01: configured for UDMA/33
[ 1.536975] scsi 1:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL11 PQ: 0 ANSI: 5
[ 1.552061] sd 0:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 1.552142] sd 0:0:0:0: [sda] Write Protect is off
[ 1.552147] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.552181] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.559320] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.559328] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.559996] sr 1:0:1:0: Attached scsi CD-ROM sr0
[ 1.643895] sda: sda1 sda2 < sda5 >
[ 1.644634] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.653921] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.654637] sr 1:0:1:0: Attached scsi generic sg1 type 5
[ 1.744032] usb 2-2: new low-speed USB device number 2 using uhci_hcd
[ 1.912279] usb 2-2: New USB device found, idVendor=15ca, idProduct=00c3
[ 1.912285] usb 2-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 1.912289] usb 2-2: Product: USB Optical Mouse
[ 1.944537] input: USB Optical Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input1
[ 1.944858] generic-usb 0003:15CA:00C3.0001: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:10.0-2/input0
[ 1.945166] usbcore: registered new interface driver usbhid
[ 1.945170] usbhid: USB HID core driver
[ 2.156058] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[ 2.355569] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.368680] usb 3-2: New USB device found, idVendor=03f0, idProduct=0604
[ 2.368687] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.368691] usb 3-2: Product: DeskJet 840C
[ 2.368694] usb 3-2: Manufacturer: Hewlett-Packard
[ 2.368697] usb 3-2: SerialNumber: CN0BF1P2XJKV
[ 5.230496] udevd[291]: starting version 175
[ 5.775232] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 5.775244] ACPI: Power Button [PWRB]
[ 5.775362] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 5.775367] ACPI: Power Button [PWRF]
[ 6.443733] NET: Registered protocol family 23
[ 6.527705] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.900369] gameport gameport0: NS558 PnP Gameport is pnp00:0c/gameport0, io 0x200, speed 1169kHz
[ 7.008432] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 7.030776] [drm] Initialized drm 1.1.0 20060810
[ 7.153141] parport_pc 00:09: reported by Plug and Play ACPI
[ 7.153218] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 7.370569] wmi: Mapper loaded
[ 7.612959] [drm] nouveau 0000:01:00.0: Detected an NV10 generation card (0x011000b2)
[ 7.613680] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
[ 7.641843] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 7.641847] [drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN
[ 7.642695] [drm] nouveau 0000:01:00.0: BMP BIOS found
[ 7.642698] [drm] nouveau 0000:01:00.0: BMP version 5.20
[ 7.642703] [drm] nouveau 0000:01:00.0: Bios version 03.11.01.24
[ 7.642708] [drm] nouveau 0000:01:00.0: No useful DCB data in VBIOS
[ 7.643933] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
[ 7.645865] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xAAD2
[ 7.645885] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xB1AE
[ 7.645893] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xAAED
[ 7.645912] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xB155
[ 7.645921] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xAB80
[ 7.645926] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xACC2
[ 7.645948] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xABA5
[ 7.663170] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 7 at offset 0xAC5D
[ 7.664143] [TTM] Zone kernel: Available graphics memory: 446456 kiB
[ 7.664149] [TTM] Zone highmem: Available graphics memory: 777204 kiB
[ 7.664152] [TTM] Initializing pool allocator
[ 7.664161] [TTM] Initializing DMA pool allocator
[ 7.664184] [drm] nouveau 0000:01:00.0: Detected 32MiB VRAM (SDRAM)
[ 7.666356] agpgart-via 0000:00:00.0: AGP 2.0 bridge
[ 7.666380] agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode
[ 7.666428] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
[ 7.666433] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
[ 7.666551] [drm] nouveau 0000:01:00.0: Saving VGA fonts
[ 7.705958] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 7.705964] [drm] No driver support for vblank timestamp query.
[ 7.706054] [drm] nouveau 0000:01:00.0: 0 available performance level(s)
[ 7.706060] [drm] nouveau 0000:01:00.0: c: core 174MHz memory 286MHz
[ 7.707634] [drm] nouveau 0000:01:00.0: 0xB3C6: Parsing digital output script table
[ 7.759493] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x48000, bo f7059600
[ 7.759754] fbcon: nouveaufb (fb0) is primary device
[ 7.773971] Console: switching to colour frame buffer device 160x64
[ 7.775393] fb0: nouveaufb frame buffer device
[ 7.775396] drm: registered panic notifier
[ 7.775406] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
[ 7.824071] snd_via82xx 0000:00:11.5: setting latency timer to 64
[ 8.338359] codec_read: codec 0 is not valid [0xfe0000]
[ 8.344605] codec_read: codec 0 is not valid [0xfe0000]
[ 8.350783] codec_read: codec 0 is not valid [0xfe0000]
[ 8.356855] codec_read: codec 0 is not valid [0xfe0000]
[ 9.556694] usblp0: Disabling reads from problematic bidirectional printer
[ 9.567997] usblp0: USB Unidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0604
[ 9.568478] usbcore: registered new interface driver usblp
[ 11.292222] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 11.670972] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 11.905060] loop: module loaded
[ 13.619713] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 15.161700] RPC: Registered named UNIX socket transport module.
[ 15.161707] RPC: Registered udp transport module.
[ 15.161710] RPC: Registered tcp transport module.
[ 15.161712] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 15.237705] FS-Cache: Loaded
[ 15.334099] FS-Cache: Netfs 'nfs' registered for caching
[ 15.354707] Installing knfsd (copyright (C) 1996 [EMAIL="okir@monad.swb.de"]okir@monad.swb.de[/EMAIL]).
[ 17.739394] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input5
[ 20.459892] Bluetooth: Core ver 2.16
[ 20.459942] NET: Registered protocol family 31
[ 20.459945] Bluetooth: HCI device and connection manager initialized
[ 20.459951] Bluetooth: HCI socket layer initialized
[ 20.459954] Bluetooth: L2CAP socket layer initialized
[ 20.460872] Bluetooth: SCO socket layer initialized
[ 20.503447] Bluetooth: RFCOMM TTY layer initialized
[ 20.503467] Bluetooth: RFCOMM socket layer initialized
[ 20.503470] Bluetooth: RFCOMM ver 1.11
[ 20.659730] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.659736] Bluetooth: BNEP filters: protocol multicast
[ 20.772962] lp0: using parport0 (interrupt-driven).
[ 20.788765] ppdev: user-space parallel port driver
[ 24.526907] usblp0: removed
[ 24.553073] usblp0: Disabling reads from problematic bidirectional printer
[ 24.573627] usblp0: USB Unidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0604
[ 28.669541] via-rhine 0000:00:12.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 40.064035] eth0: no IPv6 routers present
[ 340.432017] usb 2-1: new low-speed USB device number 3 using uhci_hcd
[ 340.552014] usb 2-1: device descriptor read/64, error -71
[ 340.776065] usb 2-1: device descriptor read/64, error -71
[ 340.992014] usb 2-1: new low-speed USB device number 4 using uhci_hcd
[ 341.112012] usb 2-1: device descriptor read/64, error -71
[ 341.336038] usb 2-1: device descriptor read/64, error -71
[ 341.552014] usb 2-1: new low-speed USB device number 5 using uhci_hcd
[ 341.960023] usb 2-1: device not accepting address 5, error -71
[ 342.072021] usb 2-1: new low-speed USB device number 6 using uhci_hcd
[ 342.480050] usb 2-1: device not accepting address 6, error -71
[ 342.480082] hub 2-0:1.0: unable to enumerate USB device on port 1
[ 343.432042] usb 1-1: new high-speed USB device number 5 using ehci_hcd
[ 343.564911] usb 1-1: New USB device found, idVendor=0fce, idProduct=0161
[ 343.564916] usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[ 343.564919] usb 1-1: Product: MT11i
[ 343.564922] usb 1-1: Manufacturer: Sony
[ 343.564924] usb 1-1: SerialNumber: BX90300U76
[ 425.772595] usb 1-1: USB disconnect, device number 5
[ 429.612050] hub 1-0:1.0: over-current condition on port 1
[ 429.820022] hub 1-0:1.0: over-current condition on port 2
[ 430.028042] hub 1-0:1.0: over-current condition on port 1
[ 430.236056] hub 2-0:1.0: over-current condition on port 1
[ 430.444019] hub 2-0:1.0: over-current condition on port 2
[ 430.444029] usb 2-2: USB disconnect, device number 2
[ 432.176018] usb 2-2: new low-speed USB device number 7 using uhci_hcd
[ 432.344515] usb 2-2: New USB device found, idVendor=15ca, idProduct=00c3
[ 432.344522] usb 2-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 432.344526] usb 2-2: Product: USB Optical Mouse
[ 432.363328] input: USB Optical Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input6
[ 432.363776] generic-usb 0003:15CA:00C3.0002: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:10.0-2/input0
[ 2324.244046] floppy0: disk absent or changed during operation
[ 2324.244056] end_request: I/O error, dev fd0, sector 0
[ 2324.244066] Buffer I/O error on device fd0, logical block 0
[ 2324.244177] floppy0: disk absent or changed during operation
[ 2324.244182] end_request: I/O error, dev fd0, sector 0
[ 2324.244186] Buffer I/O error on device fd0, logical block 0
[ 2324.258582] sr 1:0:1:0: [sr0] Device not ready
[ 2324.258588] sr 1:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2324.258593] sr 1:0:1:0: [sr0] Sense Key : Not Ready [current]
[ 2324.258599] sr 1:0:1:0: [sr0] Add. Sense: Medium not present
[ 2324.258608] sr 1:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 2324.258618] end_request: I/O error, dev sr0, sector 0
[ 2324.258625] Buffer I/O error on device sr0, logical block 0
[ 2324.258631] Buffer I/O error on device sr0, logical block 1
[ 2324.258634] Buffer I/O error on device sr0, logical block 2
[ 2324.258637] Buffer I/O error on device sr0, logical block 3
[ 2324.258640] Buffer I/O error on device sr0, logical block 4
[ 2324.258643] Buffer I/O error on device sr0, logical block 5
[ 2324.258647] Buffer I/O error on device sr0, logical block 6
[ 2324.258650] Buffer I/O error on device sr0, logical block 7
[ 2324.258691] sr 1:0:1:0: [sr0] unaligned transfer
[ 2324.258709] sr 1:0:1:0: [sr0] unaligned transfer
[ 2324.258726] sr 1:0:1:0: [sr0] unaligned transfer
[ 2324.258742] sr 1:0:1:0: [sr0] unaligned transfer
[ 2324.258758] sr 1:0:1:0: [sr0] unaligned transfer
[ 2324.258774] sr 1:0:1:0: [sr0] unaligned transfer
[ 2324.258790] sr 1:0:1:0: [sr0] unaligned transfer
[ 2324.258806] sr 1:0:1:0: [sr0] unaligned transfer
[ 2325.540820] floppy0: disk absent or changed during operation
[ 2325.540830] end_request: I/O error, dev fd0, sector 0
[ 2325.540900] floppy0: disk absent or changed during operation
[ 2325.540905] end_request: I/O error, dev fd0, sector 0
[ 2325.553315] sr 1:0:1:0: [sr0] Device not ready
[ 2325.553321] sr 1:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2325.553326] sr 1:0:1:0: [sr0] Sense Key : Not Ready [current]
[ 2325.553332] sr 1:0:1:0: [sr0] Add. Sense: Medium not present
[ 2325.553341] sr 1:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 2325.553352] end_request: I/O error, dev sr0, sector 0
[ 2325.553401] sr 1:0:1:0: [sr0] unaligned transfer
[ 2325.553419] sr 1:0:1:0: [sr0] unaligned transfer
[ 2325.553436] sr 1:0:1:0: [sr0] unaligned transfer
[ 2325.553452] sr 1:0:1:0: [sr0] unaligned transfer
[ 2325.553467] sr 1:0:1:0: [sr0] unaligned transfer
[ 2325.553483] sr 1:0:1:0: [sr0] unaligned transfer
[ 2325.553499] sr 1:0:1:0: [sr0] unaligned transfer
[ 2325.553515] sr 1:0:1:0: [sr0] unaligned transfer
[ 2372.368044] floppy0: disk absent or changed during operation
[ 2372.368054] end_request: I/O error, dev fd0, sector 0
[ 2372.368061] quiet_error: 58 callbacks suppressed
[ 2372.368065] Buffer I/O error on device fd0, logical block 0
[ 2372.368133] floppy0: disk absent or changed during operation
[ 2372.368138] end_request: I/O error, dev fd0, sector 0
[ 2372.368141] Buffer I/O error on device fd0, logical block 0
[ 2372.382412] sr 1:0:1:0: [sr0] Device not ready
[ 2372.382418] sr 1:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2372.382423] sr 1:0:1:0: [sr0] Sense Key : Not Ready [current]
[ 2372.382429] sr 1:0:1:0: [sr0] Add. Sense: Medium not present
[ 2372.382438] sr 1:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 2372.382449] end_request: I/O error, dev sr0, sector 0
[ 2372.382455] Buffer I/O error on device sr0, logical block 0
[ 2372.382460] Buffer I/O error on device sr0, logical block 1
[ 2372.382463] Buffer I/O error on device sr0, logical block 2
[ 2372.382466] Buffer I/O error on device sr0, logical block 3
[ 2372.382469] Buffer I/O error on device sr0, logical block 4
[ 2372.382473] Buffer I/O error on device sr0, logical block 5
[ 2372.382476] Buffer I/O error on device sr0, logical block 6
[ 2372.382479] Buffer I/O error on device sr0, logical block 7
[ 2372.382517] sr 1:0:1:0: [sr0] unaligned transfer
[ 2372.382535] sr 1:0:1:0: [sr0] unaligned transfer
[ 2372.382551] sr 1:0:1:0: [sr0] unaligned transfer
[ 2372.382567] sr 1:0:1:0: [sr0] unaligned transfer
[ 2372.382583] sr 1:0:1:0: [sr0] unaligned transfer
[ 2372.382598] sr 1:0:1:0: [sr0] unaligned transfer
[ 2372.382613] sr 1:0:1:0: [sr0] unaligned transfer
[ 2372.382629] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.252619] floppy0: disk absent or changed during operation
[ 2373.252629] end_request: I/O error, dev fd0, sector 0
[ 2373.252697] floppy0: disk absent or changed during operation
[ 2373.252701] end_request: I/O error, dev fd0, sector 0
[ 2373.265848] sr 1:0:1:0: [sr0] Device not ready
[ 2373.265855] sr 1:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2373.265860] sr 1:0:1:0: [sr0] Sense Key : Not Ready [current]
[ 2373.265866] sr 1:0:1:0: [sr0] Add. Sense: Medium not present
[ 2373.265875] sr 1:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 2373.265885] end_request: I/O error, dev sr0, sector 0
[ 2373.265932] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.265949] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.265966] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.265981] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.265997] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.266012] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.266028] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.266043] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.460466] floppy0: disk absent or changed during operation
[ 2373.460476] end_request: I/O error, dev fd0, sector 0
[ 2373.460544] floppy0: disk absent or changed during operation
[ 2373.460549] end_request: I/O error, dev fd0, sector 0
[ 2373.473690] sr 1:0:1:0: [sr0] Device not ready
[ 2373.473697] sr 1:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2373.473702] sr 1:0:1:0: [sr0] Sense Key : Not Ready [current]
[ 2373.473708] sr 1:0:1:0: [sr0] Add. Sense: Medium not present
[ 2373.473717] sr 1:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 2373.473728] end_request: I/O error, dev sr0, sector 0
[ 2373.473774] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.473792] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.473808] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.473824] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.473839] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.473855] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.473870] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.473886] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.620434] floppy0: disk absent or changed during operation
[ 2373.620443] end_request: I/O error, dev fd0, sector 0
[ 2373.620511] floppy0: disk absent or changed during operation
[ 2373.620515] end_request: I/O error, dev fd0, sector 0
[ 2373.633653] sr 1:0:1:0: [sr0] Device not ready
[ 2373.633660] sr 1:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2373.633665] sr 1:0:1:0: [sr0] Sense Key : Not Ready [current]
[ 2373.633670] sr 1:0:1:0: [sr0] Add. Sense: Medium not present
[ 2373.633680] sr 1:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 2373.633690] end_request: I/O error, dev sr0, sector 0
[ 2373.633736] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.633753] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.633769] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.633785] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.633800] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.633816] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.633831] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.633846] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.781602] floppy0: disk absent or changed during operation
[ 2373.781612] end_request: I/O error, dev fd0, sector 0
[ 2373.781680] floppy0: disk absent or changed during operation
[ 2373.781684] end_request: I/O error, dev fd0, sector 0
[ 2373.794895] sr 1:0:1:0: [sr0] Device not ready
[ 2373.794901] sr 1:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2373.794906] sr 1:0:1:0: [sr0] Sense Key : Not Ready [current]
[ 2373.794911] sr 1:0:1:0: [sr0] Add. Sense: Medium not present
[ 2373.794921] sr 1:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 2373.794931] end_request: I/O error, dev sr0, sector 0
[ 2373.795251] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.795277] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.795295] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.795311] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.795326] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.795342] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.795357] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.795373] sr 1:0:1:0: [sr0] unaligned transfer
[ 2387.812048] floppy0: disk absent or changed during operation
[ 2387.812058] end_request: I/O error, dev fd0, sector 0
[ 2387.812065] quiet_error: 160 callbacks suppressed
[ 2387.812069] Buffer I/O error on device fd0, logical block 0
[ 2387.812139] floppy0: disk absent or changed during operation
[ 2387.812144] end_request: I/O error, dev fd0, sector 0
[ 2387.812147] Buffer I/O error on device fd0, logical block 0
[ 2387.826416] sr 1:0:1:0: [sr0] Device not ready
[ 2387.826423] sr 1:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2387.826428] sr 1:0:1:0: [sr0] Sense Key : Not Ready [current]
[ 2387.826433] sr 1:0:1:0: [sr0] Add. Sense: Medium not present
[ 2387.826442] sr 1:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 2387.826452] end_request: I/O error, dev sr0, sector 0
[ 2387.826459] Buffer I/O error on device sr0, logical block 0
[ 2387.826464] Buffer I/O error on device sr0, logical block 1
[ 2387.826467] Buffer I/O error on device sr0, logical block 2
[ 2387.826471] Buffer I/O error on device sr0, logical block 3
[ 2387.826474] Buffer I/O error on device sr0, logical block 4
[ 2387.826477] Buffer I/O error on device sr0, logical block 5
[ 2387.826480] Buffer I/O error on device sr0, logical block 6
[ 2387.826483] Buffer I/O error on device sr0, logical block 7
[ 2387.826524] sr 1:0:1:0: [sr0] unaligned transfer
[ 2387.826542] sr 1:0:1:0: [sr0] unaligned transfer
[ 2387.826559] sr 1:0:1:0: [sr0] unaligned transfer
[ 2387.826575] sr 1:0:1:0: [sr0] unaligned transfer
[ 2387.826591] sr 1:0:1:0: [sr0] unaligned transfer
[ 2387.826606] sr 1:0:1:0: [sr0] unaligned transfer
[ 2387.826622] sr 1:0:1:0: [sr0] unaligned transfer
[ 2387.826638] sr 1:0:1:0: [sr0] unaligned transfer
[ 2388.331170] floppy0: disk absent or changed during operation
[ 2388.331180] end_request: I/O error, dev fd0, sector 0
[ 2388.331250] floppy0: disk absent or changed during operation
[ 2388.331255] end_request: I/O error, dev fd0, sector 0
[ 2388.344843] sr 1:0:1:0: [sr0] Device not ready
[ 2388.344849] sr 1:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2388.344854] sr 1:0:1:0: [sr0] Sense Key : Not Ready [current]
[ 2388.344860] sr 1:0:1:0: [sr0] Add. Sense: Medium not present
[ 2388.344869] sr 1:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 2388.344879] end_request: I/O error, dev sr0, sector 0
[ 2388.344964] sr 1:0:1:0: [sr0] unaligned transfer
[ 2388.344984] sr 1:0:1:0: [sr0] unaligned transfer
[ 2388.345002] sr 1:0:1:0: [sr0] unaligned transfer
[ 2388.345018] sr 1:0:1:0: [sr0] unaligned transfer
[ 2388.345034] sr 1:0:1:0: [sr0] unaligned transfer
[ 2388.345050] sr 1:0:1:0: [sr0] unaligned transfer
[ 2388.345066] sr 1:0:1:0: [sr0] unaligned transfer
[ 2388.345082] sr 1:0:1:0: [sr0] unaligned transfer
[ 2449.632029] floppy0: disk absent or changed during operation
[ 2449.632039] end_request: I/O error, dev fd0, sector 0
[ 2449.632046] quiet_error: 58 callbacks suppressed
[ 2449.632050] Buffer I/O error on device fd0, logical block 0
[ 2449.632117] floppy0: disk absent or changed during operation
[ 2449.632122] end_request: I/O error, dev fd0, sector 0
[ 2449.632126] Buffer I/O error on device fd0, logical block 0
[ 2449.646419] sr 1:0:1:0: [sr0] Device not ready
[ 2449.646425] sr 1:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2449.646430] sr 1:0:1:0: [sr0] Sense Key : Not Ready [current]
[ 2449.646436] sr 1:0:1:0: [sr0] Add. Sense: Medium not present
[ 2449.646445] sr 1:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 2449.646456] end_request: I/O error, dev sr0, sector 0
[ 2449.646462] Buffer I/O error on device sr0, logical block 0
[ 2449.646467] Buffer I/O error on device sr0, logical block 1
[ 2449.646470] Buffer I/O error on device sr0, logical block 2
[ 2449.646474] Buffer I/O error on device sr0, logical block 3
[ 2449.646477] Buffer I/O error on device sr0, logical block 4
[ 2449.646480] Buffer I/O error on device sr0, logical block 5
[ 2449.646483] Buffer I/O error on device sr0, logical block 6
[ 2449.646486] Buffer I/O error on device sr0, logical block 7
[ 2449.646524] sr 1:0:1:0: [sr0] unaligned transfer
[ 2449.646542] sr 1:0:1:0: [sr0] unaligned transfer
[ 2449.646558] sr 1:0:1:0: [sr0] unaligned transfer
[ 2449.646574] sr 1:0:1:0: [sr0] unaligned transfer
[ 2449.646589] sr 1:0:1:0: [sr0] unaligned transfer
[ 2449.646604] sr 1:0:1:0: [sr0] unaligned transfer
[ 2449.646620] sr 1:0:1:0: [sr0] unaligned transfer
[ 2449.646635] sr 1:0:1:0: [sr0] unaligned transfer
[ 2451.015679] floppy0: disk absent or changed during operation
[ 2451.015689] end_request: I/O error, dev fd0, sector 0
[ 2451.015756] floppy0: disk absent or changed during operation
[ 2451.015760] end_request: I/O error, dev fd0, sector 0
[ 2451.029277] sr 1:0:1:0: [sr0] Device not ready
[ 2451.029284] sr 1:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2451.029289] sr 1:0:1:0: [sr0] Sense Key : Not Ready [current]
[ 2451.029295] sr 1:0:1:0: [sr0] Add. Sense: Medium not present
[ 2451.029303] sr 1:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 2451.029314] end_request: I/O error, dev sr0, sector 0
[ 2451.029360] sr 1:0:1:0: [sr0] unaligned transfer
[ 2451.029378] sr 1:0:1:0: [sr0] unaligned transfer
[ 2451.029393] sr 1:0:1:0: [sr0] unaligned transfer
[ 2451.029408] sr 1:0:1:0: [sr0] unaligned transfer
[ 2451.029424] sr 1:0:1:0: [sr0] unaligned transfer
[ 2451.029438] sr 1:0:1:0: [sr0] unaligned transfer
[ 2451.029453] sr 1:0:1:0: [sr0] unaligned transfer
[ 2451.029469] sr 1:0:1:0: [sr0] unaligned transfer
[ 2509.944027] floppy0: disk absent or changed during operation
[ 2509.944037] end_request: I/O error, dev fd0, sector 0
[ 2509.944044] quiet_error: 58 callbacks suppressed
[ 2509.944048] Buffer I/O error on device fd0, logical block 0
[ 2509.944116] floppy0: disk absent or changed during operation
[ 2509.944120] end_request: I/O error, dev fd0, sector 0
[ 2509.944124] Buffer I/O error on device fd0, logical block 0
[ 2509.958402] sr 1:0:1:0: [sr0] Device not ready
[ 2509.958408] sr 1:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2509.958413] sr 1:0:1:0: [sr0] Sense Key : Not Ready [current]
[ 2509.958419] sr 1:0:1:0: [sr0] Add. Sense: Medium not present
[ 2509.958428] sr 1:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 2509.958438] end_request: I/O error, dev sr0, sector 0
[ 2509.958445] Buffer I/O error on device sr0, logical block 0
[ 2509.958450] Buffer I/O error on device sr0, logical block 1
[ 2509.958453] Buffer I/O error on device sr0, logical block 2
[ 2509.958457] Buffer I/O error on device sr0, logical block 3
[ 2509.958460] Buffer I/O error on device sr0, logical block 4
[ 2509.958463] Buffer I/O error on device sr0, logical block 5
[ 2509.958467] Buffer I/O error on device sr0, logical block 6
[ 2509.958470] Buffer I/O error on device sr0, logical block 7
[ 2509.958510] sr 1:0:1:0: [sr0] unaligned transfer
[ 2509.958527] sr 1:0:1:0: [sr0] unaligned transfer
[ 2509.958544] sr 1:0:1:0: [sr0] unaligned transfer
[ 2509.958560] sr 1:0:1:0: [sr0] unaligned transfer
[ 2509.958575] sr 1:0:1:0: [sr0] unaligned transfer
[ 2509.958591] sr 1:0:1:0: [sr0] unaligned transfer
[ 2509.958606] sr 1:0:1:0: [sr0] unaligned transfer
[ 2509.958621] sr 1:0:1:0: [sr0] unaligned transfer
[ 2592.752782] sr 1:0:1:0: [sr0] Device not ready
[ 2592.752789] sr 1:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2592.752794] sr 1:0:1:0: [sr0] Sense Key : Not Ready [current]
[ 2592.752799] sr 1:0:1:0: [sr0] Add. Sense: Medium not present
[ 2592.752809] sr 1:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 2592.752819] end_request: I/O error, dev sr0, sector 0
[ 2592.752825] quiet_error: 24 callbacks suppressed
[ 2592.752829] Buffer I/O error on device sr0, logical block 0
[ 2592.752834] Buffer I/O error on device sr0, logical block 1
[ 2592.752837] Buffer I/O error on device sr0, logical block 2
[ 2592.752840] Buffer I/O error on device sr0, logical block 3
[ 2592.752844] Buffer I/O error on device sr0, logical block 4
[ 2592.752847] Buffer I/O error on device sr0, logical block 5
[ 2592.752850] Buffer I/O error on device sr0, logical block 6
[ 2592.752853] Buffer I/O error on device sr0, logical block 7
[ 2592.752858] Buffer I/O error on device sr0, logical block 8
[ 2592.752862] Buffer I/O error on device sr0, logical block 9
[ 2592.752901] sr 1:0:1:0: [sr0] unaligned transfer
[ 2592.752920] sr 1:0:1:0: [sr0] unaligned transfer
[ 2592.752938] sr 1:0:1:0: [sr0] unaligned transfer
[ 2592.752954] sr 1:0:1:0: [sr0] unaligned transfer
[ 2592.752971] sr 1:0:1:0: [sr0] unaligned transfer
[ 2592.752987] sr 1:0:1:0: [sr0] unaligned transfer
[ 2592.753004] sr 1:0:1:0: [sr0] unaligned transfer
[ 2592.753020] sr 1:0:1:0: [sr0] unaligned transfer
[ 2692.367459] ISO 9660 Extensions: Microsoft Joliet Level 1
[ 2692.408198] ISOFS: changing to secondary root
[ 2793.466851] VFS: busy inodes on changed media or resized disk sr0
[ 2798.043301] iso9660: Corrupted directory entry in block 0 of inode 1792
[ 2798.043318] iso9660: Corrupted directory entry in block 0 of inode 1792
[ 3569.456584] iso9660: Corrupted directory entry in block 0 of inode 1792
[ 3569.655226] iso9660: Corrupted directory entry in block 0 of inode 1792
[ 3569.656267] iso9660: Corrupted directory entry in block 0 of inode 1792
[ 3569.656322] iso9660: Corrupted directory entry in block 0 of inode 1792
[ 3569.656540] iso9660: Corrupted directory entry in block 0 of inode 1792
[ 3569.656578] iso9660: Corrupted directory entry in block 0 of inode 1792
[ 3569.656624] iso9660: Corrupted directory entry in block 0 of inode 1792Kod: Zaznacz cały
cat /etc/fstabMasz jakąś nie pierwszej świeżości płytę w napędzie CD/DVD?
[ 3569.656578] iso9660: Corrupted directory entry in block 0 of inode 1792 [ 3569.656624] iso9660: Corrupted directory entry in block 0 of inode 1792
Kod: Zaznacz cały
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=293489e5-df2d-4f94-b81c-e8a252d324a5 / ext4 errors=remount-ro 0 1
# /home was on /dev/sda5 during installation
UUID=8857a901-eea0-4d2b-b46d-f14d8fd54b9f /home ext4 defaults 0 2
/dev/fd0 /media/floppy0 auto rw,user,noauto 0 0Kod: Zaznacz cały
/dev/fd0 /media/floppy0 auto rw,user,noauto 0 0Kod: Zaznacz cały
su -c 'update-initramfs -u'