Toshiba P75 brak Wi-Fi karta Intel Corporation Dual Band Wireless-AC 7260

Wszystko związane z jądrem systemowym, sterownikami, sprzętem itp.
Awatar użytkownika
neo86
Beginner
Posty: 285
Rejestracja: 16 października 2013, 00:03
Lokalizacja: Opolskie

[solved] Toshiba P75 brak Wi-Fi karta Intel Corporation Dual Band Wireless-AC 7260

Post autor: neo86 »

Witam!

W sprzęcie wymienionym w stopce nie działa mi karta Wi-Fi choć jest wykrywana...:

Kod: Zaznacz cały

Network controller: Intel Corporation Wireless 7260 (rev 73)
    Subsystem: Intel Corporation Dual Band Wireless-AC 7260
    Flags: fast devsel, IRQ 18
    Memory at b1000000 (64-bit, non-prefetchable) [size=8K]
    Capabilities: [c8] Power Management version 3
    Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
    Capabilities: [40] Express Endpoint, MSI 00
    Capabilities: [100] Advanced Error Reporting
    Capabilities: [140] Device Serial Number fc-f8-ae-ff-ff-47-21-56
    Capabilities: [14c] Latency Tolerance Reporting
    Capabilities: [154] Vendor Specific Information: ID=cafe Rev=1 Len=014 <?>

Kod: Zaznacz cały

root@toshiba:/home/neo86# lspci | grep -i wireless
01:00.0 Network controller: Intel Corporation Wireless 7260 (rev 73)
Sprawdzałem na kernelu oryginalnym 3.2.x z Wheezego oraz z Backportów na 3.14.x

Z internetu korzystam przez kabel ale działające Wi-Fi przydało by się mieć :D

Nakierujecie mnie na rozwiązanie problemu?
Awatar użytkownika
Menel
Member
Posty: 1117
Rejestracja: 24 sierpnia 2013, 19:58
Lokalizacja: doktor informoparalityki

Post autor: Menel »

jak to świeży sprzęt to zainteresuj się testingiem albo sidem..(przynajmniej przez jakiś czas)

https://packages.debian.org/jessie/firmware-iwlwifi

z tego co widać firmware-iwlwifi z wheezego nie obsługuje Twojej karty
Awatar użytkownika
neo86
Beginner
Posty: 285
Rejestracja: 16 października 2013, 00:03
Lokalizacja: Opolskie

Post autor: neo86 »

TUTAJ znalazłem plik firmware do tej karty: http://wireless.kernel.org/en/users/Dri ... 15.8.0.tgz
Intel® Dual Band Wireless-AC 7260,
Intel® Dual Band Wireless-N 7260,
Intel® Wireless-N 7260,
Intel® Dual Band Wireless-AC 7260 for Desktop
Zainstalowałem komendą:

Kod: Zaznacz cały

cp iwlwifi-*.ucode /lib/firmware
pojawiła się rubryka sieci bezprzewodowe ale nic nie wykrywa i nic nie łączy... a wciskanie klawisza FN+F12 (tak tu w tym laptopie jest to odpowiedzialne za Wi-Fi) nic nie daje tak to wygląda: http://s25.postimg.org/6x5ul315b/wifi.png
Awatar użytkownika
Menel
Member
Posty: 1117
Rejestracja: 24 sierpnia 2013, 19:58
Lokalizacja: doktor informoparalityki

Post autor: Menel »

pokaż ifconfig -a

pisze, że masz wyłączoną przełącznikiem sprzętowym czyli poszukaj guzika ;)
Awatar użytkownika
Rafal_F
Moderator
Posty: 2350
Rejestracja: 29 sierpnia 2008, 16:45

Post autor: Rafal_F »

Pokaż:

Kod: Zaznacz cały

lspci -k
dmesg
Awatar użytkownika
neo86
Beginner
Posty: 285
Rejestracja: 16 października 2013, 00:03
Lokalizacja: Opolskie

Post autor: neo86 »

Menelu. Klikałem na klawisz odpowiedzialny za Wi-Fi i nic... tu masz swoją prośbę o komendę:

Kod: Zaznacz cały

root@toshiba:/home/neo86# ifconfig -a
eth0      Link encap:Ethernet  HWaddr c4:54:44:03:7a:78  
          inet addr:192.168.0.23  Bcast:192.168.0.255  Mask:255.255.255.0
          inet6 addr: fe80::c654:44ff:fe03:7a78/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1924 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1778 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:1919991 (1.8 MiB)  TX bytes:346266 (338.1 KiB)
          Interrupt:19 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:8 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:1104 (1.0 KiB)  TX bytes:1104 (1.0 KiB)

wlan0     Link encap:Ethernet  HWaddr fc:f8:ae:47:21:56  
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
A tu dla Rafała (całego dmesg nie było sensu wklejać ale fragment z Wi-Fi wydaje się być ok :

Kod: Zaznacz cały

[    5.670562] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
[    5.670614] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[    5.671130] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
a tu reszta:

Kod: Zaznacz cały

root@toshiba:/home/neo86# lspci -k
00:00.0 Host bridge: Intel Corporation Haswell DRAM Controller (rev 06)
    Subsystem: Toshiba America Info Systems Device fa72
00:02.0 VGA compatible controller: Intel Corporation Haswell Integrated Graphics Controller (rev 06)
    Subsystem: Toshiba America Info Systems Device fa72
    Kernel driver in use: i915
00:03.0 Audio device: Intel Corporation Haswell HD Audio Controller (rev 06)
    Subsystem: Toshiba America Info Systems Device fa72
    Kernel driver in use: snd_hda_intel
00:14.0 USB controller: Intel Corporation Lynx Point USB xHCI Host Controller (rev 04)
    Subsystem: Toshiba America Info Systems Device fa72
    Kernel driver in use: xhci_hcd
00:16.0 Communication controller: Intel Corporation Lynx Point MEI Controller #1 (rev 04)
    Subsystem: Toshiba America Info Systems Device fa72
    Kernel driver in use: mei_me
00:1a.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #2 (rev 04)
    Subsystem: Toshiba America Info Systems Device fa72
    Kernel driver in use: ehci-pci
00:1b.0 Audio device: Intel Corporation Lynx Point High Definition Audio Controller (rev 04)
    Subsystem: Toshiba America Info Systems Device fa72
    Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port #3 (rev d4)
    Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port #4 (rev d4)
    Kernel driver in use: pcieport
00:1c.4 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port #5 (rev d4)
    Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #1 (rev 04)
    Subsystem: Toshiba America Info Systems Device fa72
    Kernel driver in use: ehci-pci
00:1f.0 ISA bridge: Intel Corporation Lynx Point LPC Controller (rev 04)
    Subsystem: Toshiba America Info Systems Device fa72
    Kernel driver in use: lpc_ich
00:1f.2 SATA controller: Intel Corporation Lynx Point 6-port SATA Controller 1 [AHCI mode] (rev 04)
    Subsystem: Toshiba America Info Systems Device fa72
    Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation Lynx Point SMBus Controller (rev 04)
    Subsystem: Toshiba America Info Systems Device fa72
01:00.0 Network controller: Intel Corporation Wireless 7260 (rev 73)
    Subsystem: Intel Corporation Dual Band Wireless-AC 7260
    Kernel driver in use: iwlwifi
07:00.0 Ethernet controller: Atheros Communications Inc. AR8161 Gigabit Ethernet (rev 10)
    Subsystem: Toshiba America Info Systems Device fa72
    Kernel driver in use: alx
08:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)
    Subsystem: Toshiba America Info Systems Device fa72
    Kernel driver in use: rtsx_pci
A może to Network-Manager ma jakiś problem emocjonalno-egzystencjonalny?

WCID też widzi Wi-Fi jako wyłączone... no to klops... jak straci się gwarancja laptopa (muszę czekać 2 lata ?!) to mu wewnątrz wymienię kartę Wi-Fi na coś bardziej zjadliwego no chyba, że wymyślą działający sterownik... tym czasem będę majstrował w internetach na kablu a jak zajdzie potrzeba Wi-Fi to kupię jakąś na USB... bo tak to widzę klapa jest...
Awatar użytkownika
Menel
Member
Posty: 1117
Rejestracja: 24 sierpnia 2013, 19:58
Lokalizacja: doktor informoparalityki

Post autor: Menel »

patrzyłeś w efi/biosie ta kartę czy jest załączona? interfejs wstawałeś z konsoli?
Awatar użytkownika
neo86
Beginner
Posty: 285
Rejestracja: 16 października 2013, 00:03
Lokalizacja: Opolskie

Post autor: neo86 »

W tym Biosie co na tej maszynie jest to nie ma nic z kartą Wi-Fi... ale fizycznie ona jest bo przez otwory wentylacyjne obudowy ją widzę... jak straci się gwarancja czym prędzej wymienię na coś innego bo widzę to będzie problem...
Awatar użytkownika
Menel
Member
Posty: 1117
Rejestracja: 24 sierpnia 2013, 19:58
Lokalizacja: doktor informoparalityki

Post autor: Menel »

no fizycznie musi być skoro system ją widzi;>

próbowałeś wstawać interfejs?

Kod: Zaznacz cały

ifconfig wlan0 up
pokaż ifconfig jeszcze
Awatar użytkownika
neo86
Beginner
Posty: 285
Rejestracja: 16 października 2013, 00:03
Lokalizacja: Opolskie

Post autor: neo86 »

ifconfig:

Kod: Zaznacz cały

root@toshiba:/home/neo86# ifconfig
eth0      Link encap:Ethernet  HWaddr c4:54:44:03:7a:78  
          inet addr:192.168.0.23  Bcast:192.168.0.255  Mask:255.255.255.0
          inet6 addr: fe80::c654:44ff:fe03:7a78/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:172567 errors:0 dropped:0 overruns:0 frame:0
          TX packets:109639 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:230217145 (219.5 MiB)  TX bytes:15301137 (14.5 MiB)
          Interrupt:19 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:8 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:1104 (1.0 KiB)  TX bytes:1104 (1.0 KiB)
natomiast

ifconfig wlan0 up

Kod: Zaznacz cały

root@toshiba:/home/neo86# ifconfig wlan0 up
SIOCSIFFLAGS: Operation not possible due to RF-kill
chyba podaruję sobie na razie Wi-Fi... używam kabla więc nie ma problemu a najwyżej za jakiś czas na USB jakąś użyję :/ a po 2 latach wymienię z wnętrza...
ODPOWIEDZ