Strona 1 z 2

Przrłączanie monitora fn+f5 i problem z wifi.

: 18 kwietnia 2014, 16:49
autor: mari6274
Jako, że to mój pierwszy post tutaj to witam wszystkich serdecznie :)

Potrzebuje pomocy w kwestii podłączenia zewnętrznego monitora do netbooka pod kontrolą Debian Wheezy 7.4 stable.
Netbook ma złącze wyjściowe d-sub, a karta grafiki to biedna intel GME945. Monitor ( a właściwie to telewizor ) ma wejście d-sub. I w zasadzie wszystko jest ok po podłączeniu. Wiadomo, że HD nie osiągnę, i że d-sub jest problematyczne. W każdym razie obraz się, wyświetla, można pracować.
Problemem jest to, że po połączeniu telewizora karta wifi netbooka się wylącza. Czym to jest spowodowane i co na to zaradzić? Karta wifi to broadcom-4312.

: 18 kwietnia 2014, 16:54
autor: Rafal_F
Po podłączeniu monitora, kiedy karta się wyłączy wykonaj dmesg i wklej tu wyniki.

: 18 kwietnia 2014, 18:04
autor: mari6274
Wynik dmesg:

Kod: Zaznacz cały

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.54-2
[    0.000000] Disabled fast string operations
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003f594000 (usable)
[    0.000000]  BIOS-e820: 000000003f594000 - 000000003f5bf000 (reserved)
[    0.000000]  BIOS-e820: 000000003f5bf000 - 000000003f66d000 (usable)
[    0.000000]  BIOS-e820: 000000003f66d000 - 000000003f6bf000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003f6bf000 - 000000003f6ee000 (usable)
[    0.000000]  BIOS-e820: 000000003f6ee000 - 000000003f6ff000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003f6ff000 - 000000003f700000 (usable)
[    0.000000]  BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Packard Bell     DOTS            /DOTS            , BIOS V1.16 12/18/2010
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x3f700 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FFF00000 mask 0FFF00000 write-protect
[    0.000000]   1 base 0FFFC0000 mask 0FFFE0000 uncachable
[    0.000000]   2 base 000000000 mask 0E0000000 write-back
[    0.000000]   3 base 020000000 mask 0E0000000 write-back
[    0.000000]   4 base 03F800000 mask 0FF800000 uncachable
[    0.000000]   5 base 03F700000 mask 0FFF00000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 base 000000000 mask 0FFFE0000 uncachable
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] initial memory mapped : 0 - 01a00000
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[    0.000000]  0000000000 - 0000200000 page 4k
[    0.000000]  0000200000 - 0037800000 page 2M
[    0.000000]  0037800000 - 00379fe000 page 4k
[    0.000000] kernel direct mapping tables up to 379fe000 @ 19f9000-1a00000
[    0.000000] RAMDISK: 36c8e000 - 3763f000
[    0.000000] ACPI: RSDP 000fe020 00024 (v02 ACRSYS)
[    0.000000] ACPI: XSDT 3f6fe120 00064 (v01 ACRSYS ACRPRDCT 00000001      01000013)
[    0.000000] ACPI: FACP 3f6fc000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: DSDT 3f6f0000 07244 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: FACS 3f688000 00040
[    0.000000] ACPI: SSDT 3f6fd000 004C4 (v02  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: HPET 3f6fb000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: APIC 3f6fa000 00068 (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: MCFG 3f6f9000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: ASF! 3f6f8000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: SLIC 3f6ef000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: BOOT 3f6ee000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 125MB HIGHMEM available.
[    0.000000] 889MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 379fe000
[    0.000000]   low ram: 0 - 379fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000379fe
[    0.000000]   HighMem  0x000379fe -> 0x0003f700
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[5] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0003f594
[    0.000000]     0: 0x0003f5bf -> 0x0003f66d
[    0.000000]     0: 0x0003f6bf -> 0x0003f6ee
[    0.000000]     0: 0x0003f6ff -> 0x0003f700
[    0.000000] On node 0 totalpages: 259585
[    0.000000] free_area_init_node: node 0, pgdat c1412740, node_mem_map f649e200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1748 pages used for memmap
[    0.000000]   Normal zone: 221994 pages, LIFO batch:31
[    0.000000]   HighMem zone: 251 pages used for memmap
[    0.000000]   HighMem zone: 31609 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f79da000 s33280 r0 d24064 u57344
[    0.000000] pcpu-alloc: s33280 r0 d24064 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257554
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=cc5a5250-50ee-42d4-b949-6ea0a2b01b33 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000379fe:0003f700)
[    0.000000] Memory: 1014112k/1039360k available (2855k kernel code, 24228k reserved, 1344k data, 420k init, 127440k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
[    0.000000]     pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
[    0.000000]     vmalloc : 0xf81fe000 - 0xff9fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf79fe000   ( 889 MB)
[    0.000000]       .init : 0xc141b000 - 0xc1484000   ( 420 kB)
[    0.000000]       .data : 0xc12c9ec0 - 0xc141a100   (1344 kB)
[    0.000000]       .text : 0xc1000000 - 0xc12c9ec0   (2855 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:512 16
[    0.000000] CPU 0 irqstacks, hard=f6006000 soft=f6008000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1662.217 MHz processor.
[    0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3324.43 BogoMIPS (lpj=6648868)
[    0.004015] pid_max: default: 32768 minimum: 301
[    0.004109] Security Framework initialized
[    0.004118] AppArmor: AppArmor disabled by boot time parameter
[    0.004156] Mount-cache hash table entries: 512
[    0.004409] Initializing cgroup subsys cpuacct
[    0.004422] Initializing cgroup subsys memory
[    0.004440] Initializing cgroup subsys devices
[    0.004446] Initializing cgroup subsys freezer
[    0.004451] Initializing cgroup subsys net_cls
[    0.004456] Initializing cgroup subsys blkio
[    0.004470] Initializing cgroup subsys perf_event
[    0.004524] Disabled fast string operations
[    0.004532] CPU: Physical Processor ID: 0
[    0.004536] CPU: Processor Core ID: 0
[    0.004542] mce: CPU supports 5 MCE banks
[    0.004556] CPU0: Thermal monitoring enabled (TM2)
[    0.004564] using mwait in idle threads.
[    0.005122] ACPI: Core revision 20110623
[    0.020106] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.020603] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.061707] CPU0: Intel(R) Atom(TM) CPU N280   @ 1.66GHz stepping 02
[    0.064003] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
[    0.064003] ... version:                3
[    0.064003] ... bit width:              40
[    0.064003] ... generic registers:      2
[    0.064003] ... value mask:             000000ffffffffff
[    0.064003] ... max period:             000000007fffffff
[    0.064003] ... fixed-purpose events:   3
[    0.064003] ... event mask:             0000000700000003
[    0.064003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.064003] CPU 1 irqstacks, hard=f60b4000 soft=f60b6000
[    0.064003] Booting Node   0, Processors  #1 Ok.
[    0.064003] smpboot cpu 1: start_ip = 9b000
[    0.008000] Initializing CPU#1
[    0.008000] Disabled fast string operations
[    0.152072] NMI watchdog enabled, takes one hw-pmu counter.
[    0.152148] Brought up 2 CPUs
[    0.152156] Total of 2 processors activated (6649.35 BogoMIPS).
[    0.152788] devtmpfs: initialized
[    0.152788] PM: Registering ACPI NVS region at 3f66d000 (335872 bytes)
[    0.152788] print_constraints: dummy: 
[    0.152788] NET: Registered protocol family 16
[    0.152816] ACPI: bus type pci registered
[    0.152994] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.153003] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.153008] PCI: Using MMCONFIG for extended config space
[    0.153013] PCI: Using configuration type 1 for base access
[    0.156222] bio: create slab <bio-0> at 0
[    0.156227] ACPI: Added _OSI(Module Device)
[    0.156227] ACPI: Added _OSI(Processor Device)
[    0.156227] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.156227] ACPI: Added _OSI(Processor Aggregator Device)
[    0.159064] ACPI: EC: Look up EC in DSDT
[    0.162789] ACPI: Executed 1 blocks of module-level executable AML code
[    0.166878] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.167969] ACPI: SSDT 3f597c90 001F7 (v02  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.168730] ACPI: Dynamic OEM Table Load:
[    0.168739] ACPI: SSDT   (null) 001F7 (v02  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.169022] ACPI: SSDT 3f596e10 001C7 (v02  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.169725] ACPI: Dynamic OEM Table Load:
[    0.169733] ACPI: SSDT   (null) 001C7 (v02  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.192620] ACPI: SSDT 3f597f10 000D0 (v02  PmRef  Cpu1Ist 00003000 INTL 20051117)
[    0.193348] ACPI: Dynamic OEM Table Load:
[    0.193356] ACPI: SSDT   (null) 000D0 (v02  PmRef  Cpu1Ist 00003000 INTL 20051117)
[    0.193614] ACPI: SSDT 3f595f10 00083 (v02  PmRef  Cpu1Cst 00003000 INTL 20051117)
[    0.194319] ACPI: Dynamic OEM Table Load:
[    0.194326] ACPI: SSDT   (null) 00083 (v02  PmRef  Cpu1Cst 00003000 INTL 20051117)
[    0.216737] ACPI: Interpreter enabled
[    0.216752] ACPI: (supports S0 S3 S4 S5)
[    0.216808] ACPI: Using IOAPIC for interrupt routing
[    0.355695] ACPI: Power Resource [FN00] (on)
[    0.356495] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[    0.356952] ACPI: No dock devices found.
[    0.356960] HEST: Table not found.
[    0.356969] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.357968] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20110623/dsfield-143)
[    0.357985] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node f6040680), AE_ALREADY_EXISTS (20110623/psparse-536)
[    0.358005] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
[    0.358023] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.359721] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.359729] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xefff]
[    0.359736] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.359744] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff]
[    0.359775] pci 0000:00:00.0: [8086:27ac] type 0 class 0x000600
[    0.359843] pci 0000:00:02.0: [8086:27ae] type 0 class 0x000300
[    0.359860] pci 0000:00:02.0: reg 10: [mem 0x58280000-0x582fffff]
[    0.359871] pci 0000:00:02.0: reg 14: [io  0x60f0-0x60f7]
[    0.359882] pci 0000:00:02.0: reg 18: [mem 0x40000000-0x4fffffff pref]
[    0.359893] pci 0000:00:02.0: reg 1c: [mem 0x58300000-0x5833ffff]
[    0.359951] pci 0000:00:02.1: [8086:27a6] type 0 class 0x000380
[    0.359965] pci 0000:00:02.1: reg 10: [mem 0x58200000-0x5827ffff]
[    0.360103] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[    0.360133] pci 0000:00:1b.0: reg 10: [mem 0x58340000-0x58343fff 64bit]
[    0.360249] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.360297] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[    0.360416] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.360462] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
[    0.360580] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.360627] pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
[    0.360746] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.360791] pci 0000:00:1c.3: [8086:27d6] type 1 class 0x000604
[    0.360910] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.360957] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[    0.361020] pci 0000:00:1d.0: reg 20: [io  0x60a0-0x60bf]
[    0.361074] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[    0.361136] pci 0000:00:1d.1: reg 20: [io  0x6080-0x609f]
[    0.361191] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[    0.361253] pci 0000:00:1d.2: reg 20: [io  0x6060-0x607f]
[    0.361307] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[    0.361369] pci 0000:00:1d.3: reg 20: [io  0x6040-0x605f]
[    0.361437] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[    0.361467] pci 0000:00:1d.7: reg 10: [mem 0x58344400-0x583447ff]
[    0.361581] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.361617] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    0.361729] pci 0000:00:1f.0: [8086:27b9] type 0 class 0x000601
[    0.361856] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff2c (mask 0003)
[    0.361865] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007)
[    0.361943] pci 0000:00:1f.2: [8086:27c5] type 0 class 0x000106
[    0.361972] pci 0000:00:1f.2: reg 10: [io  0x60d8-0x60df]
[    0.361988] pci 0000:00:1f.2: reg 14: [io  0x60fc-0x60ff]
[    0.362004] pci 0000:00:1f.2: reg 18: [io  0x60d0-0x60d7]
[    0.362021] pci 0000:00:1f.2: reg 1c: [io  0x60f8-0x60fb]
[    0.362037] pci 0000:00:1f.2: reg 20: [io  0x6020-0x602f]
[    0.362054] pci 0000:00:1f.2: reg 24: [mem 0x58344000-0x583443ff]
[    0.362118] pci 0000:00:1f.2: PME# supported from D3hot
[    0.362152] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[    0.362232] pci 0000:00:1f.3: reg 20: [io  0x6000-0x601f]
[    0.362460] pci 0000:01:00.0: [14e4:4315] type 0 class 0x000280
[    0.362536] pci 0000:01:00.0: reg 10: [mem 0x57100000-0x57103fff 64bit]
[    0.362925] pci 0000:01:00.0: supports D1 D2
[    0.363106] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.363115] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    0.363124] pci 0000:00:1c.0:   bridge window [mem 0x57100000-0x581fffff]
[    0.363137] pci 0000:00:1c.0:   bridge window [mem 0x50000000-0x50ffffff 64bit pref]
[    0.363210] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[    0.363219] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.363228] pci 0000:00:1c.1:   bridge window [mem 0x56100000-0x570fffff]
[    0.363240] pci 0000:00:1c.1:   bridge window [mem 0x51000000-0x51ffffff 64bit pref]
[    0.363341] pci 0000:03:00.0: [1969:1062] type 0 class 0x000200
[    0.363379] pci 0000:03:00.0: reg 10: [mem 0x55000000-0x5503ffff 64bit]
[    0.363400] pci 0000:03:00.0: reg 18: [io  0x2000-0x207f]
[    0.363553] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.368056] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[    0.368065] pci 0000:00:1c.2:   bridge window [io  0x2000-0x3fff]
[    0.368074] pci 0000:00:1c.2:   bridge window [mem 0x55000000-0x560fffff]
[    0.368087] pci 0000:00:1c.2:   bridge window [mem 0x52000000-0x52ffffff 64bit pref]
[    0.368159] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[    0.368170] pci 0000:00:1c.3:   bridge window [io  0x1000-0x1fff]
[    0.368179] pci 0000:00:1c.3:   bridge window [mem 0x54000000-0x54ffffff]
[    0.368192] pci 0000:00:1c.3:   bridge window [mem 0x53000000-0x53ffffff 64bit pref]
[    0.368291] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[    0.368310] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.368317] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xefff] (subtractive decode)
[    0.368324] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.368331] pci 0000:00:1e.0:   bridge window [mem 0x40000000-0xfebfffff] (subtractive decode)
[    0.368370] pci_bus 0000:00: on NUMA node 0
[    0.368379] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.368745] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[    0.368931] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[    0.369070] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[    0.369209] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[    0.369523] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20110623/dsfield-143)
[    0.369539] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node f6040680), AE_ALREADY_EXISTS (20110623/psparse-536)
[    0.369566]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.369712] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20110623/dsfield-143)
[    0.369727] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node f6040680), AE_ALREADY_EXISTS (20110623/psparse-536)
[    0.369753]  pci0000:00: ACPI _OSC request failed (AE_ALREADY_EXISTS), returned control mask: 0x1d
[    0.369758] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.384082] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[    0.384247] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[    0.384402] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[    0.384556] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[    0.384710] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.384866] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.385023] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.385180] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.385447] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.385447] vgaarb: loaded
[    0.385447] vgaarb: bridge control possible 0000:00:02.0
[    0.385447] PCI: Using ACPI for IRQ routing
[    0.396490] PCI: pci_cache_line_size set to 64 bytes
[    0.396696] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    0.396702] reserve RAM buffer: 000000003f594000 - 000000003fffffff 
[    0.396709] reserve RAM buffer: 000000003f66d000 - 000000003fffffff 
[    0.396715] reserve RAM buffer: 000000003f6ee000 - 000000003fffffff 
[    0.396721] reserve RAM buffer: 000000003f700000 - 000000003fffffff 
[    0.397012] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.397025] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.397036] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.400177] Switching to clocksource hpet
[    0.404062] pnp: PnP ACPI init
[    0.404104] ACPI: bus type pnp registered
[    0.405010] pnp 00:00: [bus 00-ff]
[    0.405018] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.405024] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.405030] pnp 00:00: [io  0x0d00-0xefff window]
[    0.405036] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.405043] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.405049] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.405055] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.405061] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.405067] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.405073] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.405079] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.405085] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.405092] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.405098] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.405104] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.405110] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.405116] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.405133] pnp 00:00: [mem 0x40000000-0xfebfffff window]
[    0.405286] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.468364] pnp 00:01: [io  0x002e-0x002f]
[    0.468372] pnp 00:01: [io  0x004e-0x004f]
[    0.468377] pnp 00:01: [io  0x0068]
[    0.468383] pnp 00:01: [io  0x006c]
[    0.468388] pnp 00:01: [io  0x0200-0x020f]
[    0.468394] pnp 00:01: [io  0x164e-0x164f]
[    0.468399] pnp 00:01: [io  0x0061]
[    0.468404] pnp 00:01: [io  0x0070]
[    0.468409] pnp 00:01: [io  0x0080]
[    0.468414] pnp 00:01: [io  0x0092]
[    0.468419] pnp 00:01: [io  0x00b2-0x00b3]
[    0.468424] pnp 00:01: [io  0x0063]
[    0.468430] pnp 00:01: [io  0x0065]
[    0.468435] pnp 00:01: [io  0x0067]
[    0.468440] pnp 00:01: [io  0x0600-0x060f]
[    0.468445] pnp 00:01: [io  0x0610]
[    0.468451] pnp 00:01: [io  0x0800-0x080f]
[    0.468456] pnp 00:01: [io  0x0400-0x047f]
[    0.468461] pnp 00:01: [io  0x0500-0x053f]
[    0.468467] pnp 00:01: [io  0xff2c-0xff2f]
[    0.468473] pnp 00:01: [mem 0xe0000000-0xefffffff]
[    0.468479] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[    0.468484] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[    0.468490] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[    0.468496] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[    0.468502] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[    0.468508] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[    0.468556] pnp 00:01: disabling [io  0x164e-0x164f] because it overlaps 0000:00:1c.3 BAR 13 [io  0x1000-0x1fff]
[    0.468695] system 00:01: [io  0x0200-0x020f] has been reserved
[    0.468704] system 00:01: [io  0x0600-0x060f] has been reserved
[    0.468711] system 00:01: [io  0x0610] has been reserved
[    0.468718] system 00:01: [io  0x0800-0x080f] has been reserved
[    0.468725] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.468732] system 00:01: [io  0x0500-0x053f] has been reserved
[    0.468739] system 00:01: [io  0xff2c-0xff2f] has been reserved
[    0.468748] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    0.468756] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.468764] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.468771] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.468779] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.468787] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.468795] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.468803] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.468833] pnp 00:02: [io  0x0000-0x001f]
[    0.468839] pnp 00:02: [io  0x0081-0x0091]
[    0.468844] pnp 00:02: [io  0x0093-0x009f]
[    0.468850] pnp 00:02: [io  0x00c0-0x00df]
[    0.468856] pnp 00:02: [dma 4]
[    0.468932] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.469000] pnp 00:03: [io  0x0070-0x0077]
[    0.469082] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.469257] pnp 00:04: [irq 0 disabled]
[    0.469277] pnp 00:04: [irq 8]
[    0.469283] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[    0.469375] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.469408] pnp 00:05: [io  0x00f0]
[    0.469420] pnp 00:05: [irq 13]
[    0.469503] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.469534] pnp 00:06: [mem 0xff800000-0xffffffff]
[    0.469610] pnp 00:06: Plug and Play ACPI device, IDs INT0800 (active)
[    0.469681] pnp 00:07: [io  0x0060]
[    0.469687] pnp 00:07: [io  0x0064]
[    0.469699] pnp 00:07: [irq 1]
[    0.469777] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.469895] pnp 00:08: [irq 12]
[    0.469983] pnp 00:08: Plug and Play ACPI device, IDs SYN1b25 SYN1b00 SYN0002 PNP0f13 (active)
[    0.470677] pnp: PnP ACPI: found 9 devices
[    0.470683] ACPI: ACPI bus type pnp unregistered
[    0.470690] PnPBIOS: Disabled by ACPI PNP
[    0.512467] PCI: max bus depth: 1 pci_try_num: 2
[    0.512539] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.512548] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    0.512559] pci 0000:00:1c.0:   bridge window [mem 0x57100000-0x581fffff]
[    0.512569] pci 0000:00:1c.0:   bridge window [mem 0x50000000-0x50ffffff 64bit pref]
[    0.512582] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[    0.512589] pci 0000:00:1c.1:   bridge window [io  0x4000-0x4fff]
[    0.512599] pci 0000:00:1c.1:   bridge window [mem 0x56100000-0x570fffff]
[    0.512609] pci 0000:00:1c.1:   bridge window [mem 0x51000000-0x51ffffff 64bit pref]
[    0.512622] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[    0.512629] pci 0000:00:1c.2:   bridge window [io  0x2000-0x3fff]
[    0.512640] pci 0000:00:1c.2:   bridge window [mem 0x55000000-0x560fffff]
[    0.512649] pci 0000:00:1c.2:   bridge window [mem 0x52000000-0x52ffffff 64bit pref]
[    0.512661] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[    0.512669] pci 0000:00:1c.3:   bridge window [io  0x1000-0x1fff]
[    0.512679] pci 0000:00:1c.3:   bridge window [mem 0x54000000-0x54ffffff]
[    0.512688] pci 0000:00:1c.3:   bridge window [mem 0x53000000-0x53ffffff 64bit pref]
[    0.512701] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[    0.512756] pci 0000:00:1c.0: setting latency timer to 64
[    0.512769] pci 0000:00:1c.1: enabling device (0000 -> 0003)
[    0.512789] pci 0000:00:1c.1: setting latency timer to 64
[    0.512812] pci 0000:00:1c.2: setting latency timer to 64
[    0.512825] pci 0000:00:1c.3: enabling device (0000 -> 0003)
[    0.512844] pci 0000:00:1c.3: setting latency timer to 64
[    0.512858] pci 0000:00:1e.0: setting latency timer to 64
[    0.512866] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.512873] pci_bus 0000:00: resource 5 [io  0x0d00-0xefff]
[    0.512879] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.512886] pci_bus 0000:00: resource 7 [mem 0x40000000-0xfebfffff]
[    0.512892] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
[    0.512898] pci_bus 0000:01: resource 1 [mem 0x57100000-0x581fffff]
[    0.512905] pci_bus 0000:01: resource 2 [mem 0x50000000-0x50ffffff 64bit pref]
[    0.512912] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
[    0.512918] pci_bus 0000:02: resource 1 [mem 0x56100000-0x570fffff]
[    0.512925] pci_bus 0000:02: resource 2 [mem 0x51000000-0x51ffffff 64bit pref]
[    0.512931] pci_bus 0000:03: resource 0 [io  0x2000-0x3fff]
[    0.512937] pci_bus 0000:03: resource 1 [mem 0x55000000-0x560fffff]
[    0.512944] pci_bus 0000:03: resource 2 [mem 0x52000000-0x52ffffff 64bit pref]
[    0.512950] pci_bus 0000:04: resource 0 [io  0x1000-0x1fff]
[    0.512957] pci_bus 0000:04: resource 1 [mem 0x54000000-0x54ffffff]
[    0.512963] pci_bus 0000:04: resource 2 [mem 0x53000000-0x53ffffff 64bit pref]
[    0.512970] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    0.512976] pci_bus 0000:05: resource 5 [io  0x0d00-0xefff]
[    0.512982] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    0.512989] pci_bus 0000:05: resource 7 [mem 0x40000000-0xfebfffff]
[    0.513136] NET: Registered protocol family 2
[    0.513287] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.513930] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.514850] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.515284] TCP: Hash tables configured (established 131072 bind 65536)
[    0.515291] TCP reno registered
[    0.515301] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.515320] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.515591] NET: Registered protocol family 1
[    0.515632] pci 0000:00:02.0: Boot video device
[    0.515997] PCI: CLS 0 bytes, default 64
[    0.516174] Unpacking initramfs...
[    1.012243] Freeing initrd memory: 9924k freed
[    1.021463] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[    1.021471] Simple Boot Flag at 0x44 set to 0x1
[    1.022532] audit: initializing netlink socket (disabled)
[    1.022561] type=2000 audit(1397837465.016:1): initialized
[    1.050770] highmem bounce pool size: 64 pages
[    1.050781] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.051533] VFS: Disk quotas dquot_6.5.2
[    1.051606] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.051753] msgmni has been set to 1751
[    1.052181] alg: No test for stdrng (krng)
[    1.052267] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.052275] io scheduler noop registered
[    1.052279] io scheduler deadline registered
[    1.052316] io scheduler cfq registered (default)
[    1.052515] pcieport 0000:00:1c.0: setting latency timer to 64
[    1.052592] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    1.052724] pcieport 0000:00:1c.1: setting latency timer to 64
[    1.052792] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    1.052927] pcieport 0000:00:1c.2: setting latency timer to 64
[    1.052992] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[    1.053113] pcieport 0000:00:1c.3: setting latency timer to 64
[    1.053178] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[    1.053376] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.053440] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.053445] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    1.053909] acpiphp: Slot [1] registered
[    1.053949] acpiphp_glue: sibling found, but _SUN doesn't match!
[    1.053992] acpiphp_glue: sibling found, but _SUN doesn't match!
[    1.054028] acpiphp_glue: sibling found, but _SUN doesn't match!
[    1.054404] intel_idle: MWAIT substates: 0x20220
[    1.054422] intel_idle: v0.4 model 0x1C
[    1.054427] intel_idle: lapic_timer_reliable_states 0x2
[    1.054433] Marking TSC unstable due to TSC halts in idle states deeper than C2
[    1.054510] ERST: Table is not found!
[    1.054514] GHES: HEST is not enabled!
[    1.054548] isapnp: Scanning for PnP cards...
[    1.408533] isapnp: No Plug & Play device found
[    1.408711] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.412929] Linux agpgart interface v0.103
[    1.413183] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[    1.413473] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[    1.413698] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    1.413963] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x40000000
[    1.414344] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[    1.434026] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.434042] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.434401] mousedev: PS/2 mouse device common for all mice
[    1.436348] rtc_cmos 00:03: RTC can wake from S4
[    1.436577] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    1.436622] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.436747] cpuidle: using governor ladder
[    1.436882] cpuidle: using governor menu
[    1.437444] TCP cubic registered
[    1.437565] NET: Registered protocol family 10
[    1.438845] Mobile IPv6
[    1.438854] NET: Registered protocol family 17
[    1.438865] Registering the dns_resolver key type
[    1.438906] Using IPI No-Shortcut mode
[    1.439238] PM: Hibernation image not present or could not be loaded.
[    1.439267] registered taskstats version 1
[    1.440108] rtc_cmos 00:03: setting system clock to 2014-04-18 16:11:05 UTC (1397837465)
[    1.440270] Initializing network drop monitor service
[    1.440564] Freeing unused kernel memory: 420k freed
[    1.440955] Write protecting the kernel text: 2856k
[    1.441038] Write protecting the kernel read-only data: 1084k
[    1.441044] NX-protecting the kernel data: 3288k
[    1.454577] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.471686] udevd[49]: starting version 175
[    1.545831] atl1c 0000:03:00.0: setting latency timer to 64
[    1.551734] thermal LNXTHERM:00: registered as thermal_zone0
[    1.551745] ACPI: Thermal Zone [THRM] (27 C)
[    1.566304] ACPI: Fan [FAN] (on)
[    1.585661] b43-pci-bridge 0000:01:00.0: setting latency timer to 64
[    1.604218] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x16, vendor 0x4243)
[    1.604246] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0F, vendor 0x4243)
[    1.604272] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x0A, vendor 0x4243)
[    1.604297] ssb: Core 3 found: PCI-E (cc 0x820, rev 0x09, vendor 0x4243)
[    1.645935] atl1c 0000:03:00.0: version 1.0.1.0-NAPI
[    1.684274] ssb: Sonics Silicon Backplane found on PCI device 0000:01:00.0
[    1.714232] usbcore: registered new interface driver usbfs
[    1.714314] usbcore: registered new interface driver hub
[    1.719599] usbcore: registered new device driver usb
[    1.721121] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.721217] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.721228] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.721295] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.721350] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    1.721371] ehci_hcd 0000:00:1d.7: debug port 1
[    1.725275] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    1.725677] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x58344400
[    1.740098] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.740214] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.740225] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.740233] usb usb1: Product: EHCI Host Controller
[    1.740241] usb usb1: Manufacturer: Linux 3.2.0-4-686-pae ehci_hcd
[    1.740248] usb usb1: SerialNumber: 0000:00:1d.7
[    1.740667] hub 1-0:1.0: USB hub found
[    1.740686] hub 1-0:1.0: 8 ports detected
[    1.742052] uhci_hcd: USB Universal Host Controller Interface driver
[    1.749466] SCSI subsystem initialized
[    1.753955] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.753968] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.754003] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.754061] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000060a0
[    1.754187] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.754197] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.754205] usb usb2: Product: UHCI Host Controller
[    1.754212] usb usb2: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[    1.754219] usb usb2: SerialNumber: 0000:00:1d.0
[    1.754650] hub 2-0:1.0: USB hub found
[    1.754669] hub 2-0:1.0: 2 ports detected
[    1.754932] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.754944] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.754976] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.755062] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00006080
[    1.755179] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.755190] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.755198] usb usb3: Product: UHCI Host Controller
[    1.755205] usb usb3: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[    1.755212] usb usb3: SerialNumber: 0000:00:1d.1
[    1.755633] hub 3-0:1.0: USB hub found
[    1.755651] hub 3-0:1.0: 2 ports detected
[    1.755913] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.755924] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.755954] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.756089] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006060
[    1.756207] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.756217] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.756225] usb usb4: Product: UHCI Host Controller
[    1.756232] usb usb4: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[    1.756239] usb usb4: SerialNumber: 0000:00:1d.2
[    1.758940] hub 4-0:1.0: USB hub found
[    1.758959] hub 4-0:1.0: 2 ports detected
[    1.759241] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    1.759253] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.759283] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.759374] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006040
[    1.759493] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.759503] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.759511] usb usb5: Product: UHCI Host Controller
[    1.759519] usb usb5: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[    1.759526] usb usb5: SerialNumber: 0000:00:1d.3
[    1.759954] hub 5-0:1.0: USB hub found
[    1.759973] hub 5-0:1.0: 2 ports detected
[    1.770968] libata version 3.00 loaded.
[    1.773752] ahci 0000:00:1f.2: version 3.0
[    1.773889] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[    1.774065] ahci: SSS flag set, parallel bus scan disabled
[    1.774125] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
[    1.774139] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part 
[    1.774153] ahci 0000:00:1f.2: setting latency timer to 64
[    1.776454] scsi0 : ahci
[    1.776837] scsi1 : ahci
[    1.777120] scsi2 : ahci
[    1.777419] scsi3 : ahci
[    1.778205] ata1: SATA max UDMA/133 abar m1024@0x58344000 port 0x58344100 irq 44
[    1.778215] ata2: DUMMY
[    1.778224] ata3: SATA max UDMA/133 abar m1024@0x58344000 port 0x58344200 irq 44
[    1.778232] ata4: DUMMY
[    2.052142] usb 1-2: new high-speed USB device number 2 using ehci_hcd
[    2.096089] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.097965] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.145121] ata1.00: ATA-8: WDC WD2500BEVT-00ZCT0, 11.01A11, max UDMA/133
[    2.145145] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.148074] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    2.148386] ata1.00: configured for UDMA/133
[    2.148805] scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500BEVT-0 11.0 PQ: 0 ANSI: 5
[    2.224765] usb 1-2: New USB device found, idVendor=064e, idProduct=a102
[    2.224779] usb 1-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    2.224800] usb 1-2: Product: WebCam
[    2.224806] usb 1-2: Manufacturer: SuYin
[    2.224811] usb 1-2: SerialNumber: CN0316-S30C-OV061-VA-R02.02.02
[    2.468151] ata3: SATA link down (SStatus 0 SControl 300)
[    2.479946] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    2.480230] sd 0:0:0:0: [sda] Write Protect is off
[    2.480241] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.480344] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.581264]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[    2.582971] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.587609] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.571721] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[    5.503103] udevd[330]: starting version 175
[    6.072594] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    6.072612] ACPI: Power Button [PWRB]
[    6.072849] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    6.072945] ACPI: Lid Switch [LID0]
[    6.073186] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[    6.073204] ACPI: Sleep Button [SLPB]
[    6.073497] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    6.073513] ACPI: Power Button [PWRF]
[    6.130776] ACPI: Requesting acpi_cpufreq
[    6.276824] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    6.374832] [drm] Initialized drm 1.1.0 20060810
[    6.436915] acpi device:27: registered as cooling_device3
[    6.437281] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    6.437462] ACPI: Video Device [OVGA] (multi-head: yes  rom: yes  post: no)
[    6.442980] wmi: Mapper loaded
[    6.555638] intel_rng: FWH not detected
[    6.592586] iTCO_vendor_support: vendor-support=0
[    6.980792] cfg80211: Calling CRDA to update world regulatory domain
[    7.237229] ACPI: Battery Slot [BAT0] (battery present)
[    7.364229] ACPI: AC Adapter [AC] (off-line)
[    7.461784] acer_wmi: Acer Laptop ACPI-WMI Extras
[    7.481999] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[    7.482284] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0460)
[    7.482474] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    7.490662] leds_ss4200: no LED devices found
[    7.566996] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04773/0xa40000/0xa0000
[    7.569125] i915 0000:00:02.0: setting latency timer to 64
[    7.620526] acer_wmi: Function bitmap for Communication Device: 0x1
[    7.620542] acer_wmi: Brightness must be controlled by generic video driver
[    7.642605] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    7.642615] [drm] Driver supports precise vblank timestamp query.
[    7.642760] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem :o wns=io+mem
[    7.672796] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[    7.673336] fixme: max PWM is zero.
[    7.732644] b43-phy0: Broadcom 4312 WLAN found (core revision 15)
[    7.941769] [drm] initialized overlay support
[    7.962261] fbcon: inteldrmfb (fb0) is primary device
[    8.095167] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    8.097070] Registered led device: b43-phy0::tx
[    8.097153] Registered led device: b43-phy0::rx
[    8.097241] Registered led device: b43-phy0::radio
[    8.097296] Broadcom 43xx driver loaded [ Features: PMNLS ]
[    8.195755] Linux media interface: v0.10
[    8.212627] Linux video capture interface: v2.00
[    8.342709] Console: switching to colour frame buffer device 128x37
[    8.350092] fb0: inteldrmfb frame buffer device
[    8.350097] drm: registered panic notifier
[    8.350125] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    8.350342] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[    8.350409] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[    8.375677] uvcvideo: Found UVC 1.00 device WebCam (064e:a102)
[    8.392943] input: WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/input/input8
[    8.393194] usbcore: registered new interface driver uvcvideo
[    8.393201] USB Video Class driver (1.1.1)
[    8.440232] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[    8.443914] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    8.444292] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[    8.806705] cfg80211: World regulatory domain updated:
[    8.806714] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    8.806722] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.806728] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    8.806735] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    8.806741] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.806747] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.813212] EXT4-fs (sda7): re-mounted. Opts: (null)
[   12.101545] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[   12.269659] loop: module loaded
[   15.657151] RPC: Registered named UNIX socket transport module.
[   15.657161] RPC: Registered udp transport module.
[   15.657167] RPC: Registered tcp transport module.
[   15.657173] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   15.713757] FS-Cache: Loaded
[   15.784161] FS-Cache: Netfs 'nfs' registered for caching
[   15.812056] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   18.321677] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12
[   20.734408] Bluetooth: Core ver 2.16
[   20.734476] NET: Registered protocol family 31
[   20.734564] Bluetooth: HCI device and connection manager initialized
[   20.734576] Bluetooth: HCI socket layer initialized
[   20.734583] Bluetooth: L2CAP socket layer initialized
[   20.735790] Bluetooth: SCO socket layer initialized
[   20.756282] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   20.756291] Bluetooth: BNEP filters: protocol multicast
[   20.758438] Bluetooth: RFCOMM TTY layer initialized
[   20.758455] Bluetooth: RFCOMM socket layer initialized
[   20.758462] Bluetooth: RFCOMM ver 1.11
[   22.007600] lp: driver loaded but no devices found
[   22.080108] ppdev: user-space parallel port driver
[   25.055987] b43 ssb0:0: firmware: agent loaded b43/ucode15.fw into memory
[   25.110609] b43 ssb0:0: firmware: agent loaded b43/lp0initvals15.fw into memory
[   25.400434] b43 ssb0:0: firmware: agent loaded b43/lp0bsinitvals15.fw into memory
[   25.544155] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23)
[   31.105734] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   31.133497] atl1c 0000:03:00.0: irq 46 for MSI/MSI-X
[   31.192913] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   34.076249] wlan0: authenticate with d0:15:4a:f9:ab:52 (try 1)
[   34.078536] wlan0: authenticated
[   34.100249] wlan0: associate with d0:15:4a:f9:ab:52 (try 1)
[   34.103728] wlan0: RX AssocResp from d0:15:4a:f9:ab:52 (capab=0x431 status=0 aid=1)
[   34.103741] wlan0: associated
[   34.106292] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   34.106568] cfg80211: Calling CRDA for country: PL
[   34.124399] cfg80211: Regulatory domain changed to country: PL
[   34.124409] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   34.124418] cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   34.124426] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   34.124434] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   34.124442] cfg80211:     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[   44.728043] wlan0: no IPv6 routers present
[ 2461.182996] wlan0: deauthenticating from d0:15:4a:f9:ab:52 by local choice (reason=3)
[ 2461.237060] cfg80211: Calling CRDA to update world regulatory domain
[ 2461.300956] cfg80211: World regulatory domain updated:
[ 2461.300967] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2461.300978] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2461.300988] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2461.300998] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2461.301007] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2461.301017] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2463.435975] PM: Syncing filesystems ... done.
[ 2463.437547] PM: Preparing system for mem sleep
[ 2463.524458] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 2463.540250] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 2463.556171] PM: Entering mem sleep
[ 2463.556275] Suspending console(s) (use no_console_suspend to debug)
[ 2463.556743] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 2463.588596] sd 0:0:0:0: [sda] Stopping disk
[ 2463.916221] PM: suspend of devices complete after 359.685 msecs
[ 2463.932375] ehci_hcd 0000:00:1d.7: wake-up capability enabled by ACPI
[ 2463.948319] uhci_hcd 0000:00:1d.1: wake-up capability enabled by ACPI
[ 2463.948404] uhci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[ 2463.948482] PM: late suspend of devices complete after 32.249 msecs
[ 2463.948533] ACPI: Preparing to enter system sleep state S3
[ 2463.948681] PM: Saving platform NVS memory
[ 2463.950284] Disabling non-boot CPUs ...
[ 2464.052136] CPU 1 is now offline
[ 2464.053109] ACPI: Low-level resume complete
[ 2464.053109] PM: Restoring platform NVS memory
[ 2464.053109] Enabling non-boot CPUs ...
[ 2464.053109] Booting Node 0 Processor 1 APIC 0x1
[ 2464.053109] smpboot cpu 1: start_ip = 9b000
[ 2463.951932] Initializing CPU#1
[ 2463.951932] Calibrating delay loop (skipped) already calibrated this CPU
[ 2463.951932] Disabled fast string operations
[ 2464.065610] NMI watchdog enabled, takes one hw-pmu counter.
[ 2464.068173] CPU1 is up
[ 2464.069002] ACPI: Waking up from system sleep state S3
[ 2464.069667] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[ 2464.069757] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI
[ 2464.069924] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI
[ 2464.070561] PM: early resume of devices complete after 1.420 msecs
[ 2464.070684] i915 0000:00:02.0: setting latency timer to 64
[ 2464.070951] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 2464.071026] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 2464.071124] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2464.071158] usb usb2: root hub lost power or was reset
[ 2464.071188] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2464.071220] usb usb3: root hub lost power or was reset
[ 2464.071246] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2464.071278] usb usb4: root hub lost power or was reset
[ 2464.071304] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2464.071336] usb usb5: root hub lost power or was reset
[ 2464.071365] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2464.071415] pci 0000:00:1e.0: setting latency timer to 64
[ 2464.071442] ahci 0000:00:1f.2: setting latency timer to 64
[ 2464.072784] sd 0:0:0:0: [sda] Starting disk
[ 2464.312131] usb 1-2: reset high-speed USB device number 2 using ehci_hcd
[ 2464.388122] ata3: SATA link down (SStatus 0 SControl 300)
[ 2467.188149] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2467.204279] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2467.211450] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 2467.211764] ata1.00: configured for UDMA/133
[ 2467.288489] PM: resume of devices complete after 3217.882 msecs
[ 2467.288684] PM: Finishing wakeup.
[ 2467.288688] Restarting tasks ... done.
[ 2467.299789] video LNXVIDEO:00: Restoring backlight state
[ 2468.960325] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23)
[ 2474.505423] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2474.513480] atl1c 0000:03:00.0: irq 46 for MSI/MSI-X
[ 2474.573009] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2477.529341] wlan0: authenticate with d0:15:4a:f9:ab:52 (try 1)
[ 2477.532770] wlan0: authenticated
[ 2477.537471] wlan0: associate with d0:15:4a:f9:ab:52 (try 1)
[ 2477.540826] wlan0: RX AssocResp from d0:15:4a:f9:ab:52 (capab=0x431 status=0 aid=1)
[ 2477.540839] wlan0: associated
[ 2477.542755] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 2477.542946] cfg80211: Calling CRDA for country: PL
[ 2477.588604] cfg80211: Regulatory domain changed to country: PL
[ 2477.588614] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2477.588624] cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 2477.588633] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 2477.588641] cfg80211:     (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 2477.588650] cfg80211:     (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 2488.144161] wlan0: no IPv6 routers present
[ 5725.244367] composite sync not supported
[ 5725.244380] composite sync not supported
[ 5735.436373] wlan0: deauthenticating from d0:15:4a:f9:ab:52 by local choice (reason=3)
[ 5735.444305] cfg80211: Calling CRDA to update world regulatory domain
[ 5736.088650] composite sync not supported
[ 5736.088666] composite sync not supported
[ 5736.509160] [drm] Changing LVDS panel from (-hsync, -vsync) to (+hsync, +vsync)
[ 5737.022264] cfg80211: World regulatory domain updated:
[ 5737.022274] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 5737.022284] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5737.022293] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5737.022302] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5737.022311] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5737.022320] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

: 18 kwietnia 2014, 18:21
autor: Rafal_F
Wklej jeszcze wyniki:

Kod: Zaznacz cały

lspci -k
lspci -n
iwconfig
I sprawdź jeszcze końcówkę /var/log/syslog.

: 18 kwietnia 2014, 18:38
autor: mari6274
Sprawdzałem lscpi gdy próbowałem postawić wlan, lecz system nie znajdywał wtedy broadcoma.

Mniej więcej w tym momencie podłączałem monitor.

Kod: Zaznacz cały

Apr 18 17:22:25 debian NetworkManager[2612]: <warn> nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted
Apr 18 17:22:35 debian dbus[2379]: [system] Activating service name='org.freedesktop.PackageKit' (using servicehelper)
Apr 18 17:22:36 debian dbus[2379]: [system] Successfully activated service 'org.freedesktop.PackageKit'
Apr 18 17:27:44 debian anacron[5076]: Anacron 2.3 started on 2014-04-18
Apr 18 17:27:44 debian anacron[5076]: Normal exit (0 jobs run)
Apr 18 17:28:31 debian NetworkManager[2612]: <warn> nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted
Apr 18 17:32:25 debian NetworkManager[2612]: <warn> nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted
Apr 18 17:32:43 debian dbus[2379]: [system] Activating service name='org.freedesktop.PackageKit' (using servicehelper)
Apr 18 17:32:44 debian dbus[2379]: [system] Successfully activated service 'org.freedesktop.PackageKit'
Apr 18 17:41:25 debian NetworkManager[2612]: <warn> nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted
Apr 18 17:41:33 debian wpa_supplicant[3265]: wlan0: WPA: Group rekeying completed with d0:15:4a:f9:ab:52 [GTK=TKIP]
Apr 18 17:51:07 debian NetworkManager[2612]: <warn> nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted
Apr 18 17:52:12 debian kernel: [ 5725.244367] composite sync not supported
Apr 18 17:52:12 debian kernel: [ 5725.244380] composite sync not supported
Apr 18 17:52:22 debian kernel: [ 5735.436373] wlan0: deauthenticating from d0:15:4a:f9:ab:52 by local choice (reason=3)
Apr 18 17:52:22 debian kernel: [ 5735.444305] cfg80211: Calling CRDA to update world regulatory domain
Apr 18 17:52:22 debian wpa_supplicant[3265]: wlan0: CTRL-EVENT-DISCONNECTED bssid=d0:15:4a:f9:ab:52 reason=3
Apr 18 17:52:22 debian dhclient: receive_packet failed on wlan0: Network is down
Apr 18 17:52:23 debian avahi-daemon[2565]: Interface wlan0.IPv6 no longer relevant for mDNS.
Apr 18 17:52:23 debian avahi-daemon[2565]: Leaving mDNS multicast group on interface wlan0.IPv6 with address fe80::226:5eff:fe29:1b45.
Apr 18 17:52:23 debian avahi-daemon[2565]: Interface wlan0.IPv4 no longer relevant for mDNS.
Apr 18 17:52:23 debian avahi-daemon[2565]: Leaving mDNS multicast group on interface wlan0.IPv4 with address 192.168.1.13.
Apr 18 17:52:23 debian avahi-daemon[2565]: Withdrawing address record for fe80::226:5eff:fe29:1b45 on wlan0.
Apr 18 17:52:23 debian kernel: [ 5736.088650] composite sync not supported
Apr 18 17:52:23 debian kernel: [ 5736.088666] composite sync not supported
Apr 18 17:52:23 debian NetworkManager[2612]: <info> radio killswitch /sys/devices/pci0000:00/0000:00:1c.0/0000:01:00.0/ssb0:0/ieee80211/phy0/rfkill1 disappeared
Apr 18 17:52:23 debian NetworkManager[2612]:    SCPlugin-Ifupdown: devices removed (path: /sys/devices/pci0000:00/0000:00:1c.0/0000:01:00.0/ssb0:0/net/wlan0, iface: wlan0)
Apr 18 17:52:23 debian NetworkManager[2612]: <info> (wlan0): now unmanaged
Apr 18 17:52:23 debian NetworkManager[2612]: <info> (wlan0): device state change: activated -> unmanaged (reason 'removed') [100 10 36]
Apr 18 17:52:23 debian avahi-daemon[2565]: Withdrawing address record for 192.168.1.13 on wlan0.
Apr 18 17:52:23 debian avahi-daemon[2565]: Withdrawing workstation service for wlan0.
Apr 18 17:52:23 debian kernel: [ 5736.509160] [drm] Changing LVDS panel from (-hsync, -vsync) to (+hsync, +vsync)
Apr 18 17:52:23 debian NetworkManager[2612]: <info> (wlan0): deactivating device (reason 'removed') [36]
Apr 18 17:52:23 debian wpa_supplicant[3265]: wlan0: Failed to initiate AP scan
Apr 18 17:52:23 debian kernel: [ 5737.022264] cfg80211: World regulatory domain updated:
Apr 18 17:52:23 debian kernel: [ 5737.022274] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Apr 18 17:52:23 debian kernel: [ 5737.022284] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr 18 17:52:23 debian kernel: [ 5737.022293] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Apr 18 17:52:23 debian kernel: [ 5737.022302] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Apr 18 17:52:23 debian kernel: [ 5737.022311] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr 18 17:52:23 debian kernel: [ 5737.022320] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Apr 18 17:52:23 debian NetworkManager[2612]: <info> (wlan0): canceled DHCP transaction, DHCP client pid 4624
Apr 18 17:52:24 debian NetworkManager[2612]: <warn> (3) failed to find interface name for index
Apr 18 17:52:24 debian NetworkManager[2612]: nm_system_iface_flush_routes: assertion `iface != NULL' failed
Apr 18 17:52:24 debian NetworkManager[2612]: <warn> (3) failed to find interface name for index
Apr 18 17:52:24 debian NetworkManager[2612]: <info> (wlan0): cleaning up...
Apr 18 17:52:24 debian NetworkManager[2612]: <warn> (3) failed to find interface name for index
Apr 18 17:52:24 debian NetworkManager[2612]: (nm-system.c:685):nm_system_iface_get_flags: runtime check failed: (iface != NULL)
Apr 18 17:52:24 debian NetworkManager[2612]: <error> [1397836344.133349] [nm-system.c:687] nm_system_iface_get_flags(): (unknown): failed to get interface link object
Apr 18 17:52:24 debian dbus[2379]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
Apr 18 17:52:24 debian wpa_supplicant[3265]: Could not read interface wlan0 flags: No such device
Apr 18 17:52:24 debian dbus[2379]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Apr 18 17:53:49 debian kernel: [ 5822.323839] [drm] Changing LVDS panel from (+hsync, +vsync) to (-hsync, -vsync)
Apr 18 17:54:53 debian anacron[5802]: Anacron 2.3 started on 2014-04-18
Apr 18 17:54:53 debian anacron[5802]: Normal exit (0 jobs run)
Apr 18 17:55:55 debian named[2402]: error (network unreachable) resolving 'www.mozilla.org/A/IN': 2001:503:c27::2:30#53
Apr 18 17:55:55 debian named[2402]: error (network unreachable) resolving 'www.mozilla.org/A/IN': 2001:7fd::1#53
Apr 18 17:55:55 debian named[2402]: error (network unreachable) resolving './NS/IN': 192.36.148.17#53
Apr 18 17:55:55 debian named[2402]: error (network unreachable) resolving './NS/IN': 199.7.83.42#53
Apr 18 17:55:55 debian named[2402]: error (network unreachable) resolving 'www.mozilla.org/A/IN': 192.36.148.17#53
Apr 18 17:55:55 debian named[2402]: error (network unreachable) resolving 'www.mozilla.org/A/IN': 199.7.83.42#53
.
.
.
.
.

: 18 kwietnia 2014, 19:07
autor: Rafal_F
A przed podłączeniem znajdował? Karta jest albo pod PCI, albo USB. Wklej tu mimo wszytko wyniki tamtych poleceń i do tego dodaj:

Kod: Zaznacz cały

lsusb

: 18 kwietnia 2014, 19:19
autor: mari6274
Ta karta Broadcoma jest urządzeniem PCI. Przed chwilą spostrzegłem, że przestaje być wykrywana nie podczas podłączenia monitora a podczas przełączania trybu wyświetlania skrótem fn+F5.

lspci -k

Kod: Zaznacz cały

00:00.0 Host bridge: Intel Corporation Mobile 945GSE Express Memory Controller Hub (rev 03)
    Subsystem: Acer Incorporated [ALI] Device 0241
    Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GSE Express Integrated Graphics Controller (rev 03)
    Subsystem: Acer Incorporated [ALI] Device 0241
    Kernel driver in use: i915
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
    Subsystem: Acer Incorporated [ALI] Device 0241
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02)
    Subsystem: Acer Incorporated [ALI] Device 0241
    Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02)
    Kernel driver in use: pcieport
00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 02)
    Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 3 (rev 02)
    Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 02)
    Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 02)
    Subsystem: Acer Incorporated [ALI] Device 0241
    Kernel driver in use: uhci_hcd
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 02)
    Subsystem: Acer Incorporated [ALI] Device 0241
    Kernel driver in use: uhci_hcd
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 02)
    Subsystem: Acer Incorporated [ALI] Device 0241
    Kernel driver in use: uhci_hcd
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 02)
    Subsystem: Acer Incorporated [ALI] Device 0241
    Kernel driver in use: uhci_hcd
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 02)
    Subsystem: Acer Incorporated [ALI] Device 0241
    Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
    Subsystem: Acer Incorporated [ALI] Device 0241
00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [AHCI mode] (rev 02)
    Subsystem: Acer Incorporated [ALI] Device 0241
    Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02)
    Subsystem: Acer Incorporated [ALI] Device 0241
    Kernel driver in use: i801_smbus
03:00.0 Ethernet controller: Atheros Communications Inc. AR8132 Fast Ethernet (rev c0)
    Subsystem: Acer Incorporated [ALI] Device 0241
    Kernel driver in use: atl1c
lspci -n

Kod: Zaznacz cały

00:00.0 0600: 8086:27ac (rev 03)
00:02.0 0300: 8086:27ae (rev 03)
00:02.1 0380: 8086:27a6 (rev 03)
00:1b.0 0403: 8086:27d8 (rev 02)
00:1c.0 0604: 8086:27d0 (rev 02)
00:1c.1 0604: 8086:27d2 (rev 02)
00:1c.2 0604: 8086:27d4 (rev 02)
00:1c.3 0604: 8086:27d6 (rev 02)
00:1d.0 0c03: 8086:27c8 (rev 02)
00:1d.1 0c03: 8086:27c9 (rev 02)
00:1d.2 0c03: 8086:27ca (rev 02)
00:1d.3 0c03: 8086:27cb (rev 02)
00:1d.7 0c03: 8086:27cc (rev 02)
00:1e.0 0604: 8086:2448 (rev e2)
00:1f.0 0601: 8086:27b9 (rev 02)
00:1f.2 0106: 8086:27c5 (rev 02)
00:1f.3 0c05: 8086:27da (rev 02)
03:00.0 0200: 1969:1062 (rev c0)
iwconfig nie możliwy do wykonania ze względu na rzekomy brak rozszerzeń.

: 18 kwietnia 2014, 19:31
autor: Rafal_F
A co pokazuje:

Kod: Zaznacz cały

rfkill list
po zniknięciu karty? Jak nie masz pakietu rfkill to go zainstaluj.

: 18 kwietnia 2014, 19:44
autor: mari6274
Okazuje się, że w jakiś sposób wini skrót fn-f5

rfkill list z działającym wifi:

Kod: Zaznacz cały

0: acer-wireless: Wireless LAN
    Soft blocked: no
    Hard blocked: no
1: phy0: Wireless LAN
    Soft blocked: no
    Hard blocked: no

i z nie działającym

Kod: Zaznacz cały

0: acer-wireless: Wireless LAN
    Soft blocked: no
    Hard blocked: no

: 18 kwietnia 2014, 20:14
autor: Rafal_F
Dołóż większy (wcześniejszy) log z /var/log/syslog. I napisz jaki to laptop.