Strona 1 z 1

[+] Karta dźwiękowa widziana przez system, jednak dźwięku nie ma

: 01 lutego 2014, 20:57
autor: Armur
Witam

To mój pierwszy post, gdyż dopiero zaczynam swoją "przygodę" z Debianem, tak więc witam wszystkich i z góry przepraszam za pytania które będę zadawał ;) .
Znając życie, niektórzy uznają iż zadaję głupie pytania, jednak system ten jest dla mnie nowością, więc nie wszystko jest w nim dla mnie takie oczywiste ;) .

Zainstalowałem dystrybucję opisywaną jako Live DVD, wersja 64 bit z nakładką graficzną KDE.
Część problemów rozwiązałem czytając opisy na forach, jednak pozostał jeden na którym utknąłem.
Jest wiele opisów na ten temat, jednak dla każdego proponowane są inne rozwiązania spersonalizowane pod niego, więc nie mam koncepcji co dalej robić.
Zwracam się wiec o pomoc do Was :) .

Po instalacji praktycznie wykryło mi cały sprzęt, jednka problem mam z kartą dźwiękową.
Już przy starcie systemu ALSA wyświetla jakieś błędy.

Zakładam iż osobie lub osobom zainteresowanym udzieleniem mi pomocy będą potrzebne wyniki wydancyh w konsoli poleceń, wkleję więc kilka które pojawiały się w postach innych osób z podobnymi problemami.


cat /proc/asound/cards
0 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xf7c00000 irq 40

cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.24.

aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC887-VD Analog [ALC887-VD Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 1: ALC887-VD Digital [ALC887-VD Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
Nie wiem czy to da jakiś obraz na temat mojej karty, jeśli jednak potrzebne są jakieś dodatkowe informacje proszę, a zastosuję się do instrukcji.

: 01 lutego 2014, 21:04
autor: Rafal_F
Uruchom:

Kod: Zaznacz cały

alsamixer
I pobaw się suwakami, sprawdź też czy nic nie jest wyciszone (klawisz m).

Jak nie zadziała, to uzupełnij informacje o wyniki skryptu z punktu 8.: threads/12771-Zakładając-temat-przeczyt ... #post81406

I dodaj do tego wyniki:

Kod: Zaznacz cały

dmesg

: 01 lutego 2014, 21:14
autor: Armur
Po wejściu do miksera miałem tylko suwak MASTER.
Nacisnąłem F6 w celu wybrania karty.
Były tam:

Kod: Zaznacz cały

- default
0 HDA Intel PCH[/QUOTE]
Po wybraniu tej Intela wyrzuciło mnie z komunikatem:
[quote]cannot load mixer controls: Zły argument
dmesg

Kod: Zaznacz cały

[    0.000000] Initializing cgroup subsys cpuset                                                                                                                                                           
[    0.000000] Initializing cgroup subsys cpu                                                                                                                                                              
[    0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.51-1                                                                  
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=5eea4715-1e59-44f0-97e5-fecccc96d2b8 ro initrd=/install/initrd.gz quiet                                                      
[    0.000000] BIOS-provided physical RAM map:                                                                                                                                                             
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)                                                                                                                                    
[    0.000000]  BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)                                                                                                                                  
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)                                                                                                                                  
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000020000000 (usable)                                                                                                                                    
[    0.000000]  BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)                                                                                                                                  
[    0.000000]  BIOS-e820: 0000000020200000 - 0000000040004000 (usable)                                                                                                                                    
[    0.000000]  BIOS-e820: 0000000040004000 - 0000000040005000 (reserved)                                                                                                                                  
[    0.000000]  BIOS-e820: 0000000040005000 - 00000000bdbf9000 (usable)                                                                                                                                    
[    0.000000]  BIOS-e820: 00000000bdbf9000 - 00000000bdf16000 (reserved)                                                                                                                                  
[    0.000000]  BIOS-e820: 00000000bdf16000 - 00000000bdf17000 (ACPI data)                                                                                                                                 
[    0.000000]  BIOS-e820: 00000000bdf17000 - 00000000be039000 (ACPI NVS)                                                                                                                                  
[    0.000000]  BIOS-e820: 00000000be039000 - 00000000be61a000 (reserved)                                                                                                                                  
[    0.000000]  BIOS-e820: 00000000be61a000 - 00000000be61b000 (usable)                                                                                                                                    
[    0.000000]  BIOS-e820: 00000000be61b000 - 00000000be65e000 (ACPI NVS)                                                                                                                                  
[    0.000000]  BIOS-e820: 00000000be65e000 - 00000000bedc7000 (usable)                                                                                                                                    
[    0.000000]  BIOS-e820: 00000000bedc7000 - 00000000befdc000 (reserved)                                                                                                                                  
[    0.000000]  BIOS-e820: 00000000befdc000 - 00000000bf000000 (usable)
[    0.000000]  BIOS-e820: 00000000bf800000 - 00000000dfa00000 (reserved)
[    0.000000]  BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 000000011f600000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./H61M-S2PV REV 2.2, BIOS FB 02/25/2013
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x11f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 100000000 mask FE0000000 write-back
[    0.000000]   2 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   3 base 0BF800000 mask FFF800000 uncachable
[    0.000000]   4 base 11F800000 mask FFF800000 uncachable
[    0.000000]   5 base 11F600000 mask FFFE00000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xbf000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000fd720] fd720
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-00000000bf000000
[    0.000000]  0000000000 - 00bf000000 page 2M
[    0.000000] kernel direct mapping tables up to bf000000 @ 1fffc000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-000000011f600000
[    0.000000]  0100000000 - 011f600000 page 2M
[    0.000000] kernel direct mapping tables up to 11f600000 @ beffe000-bf000000
[    0.000000] RAMDISK: 36a70000 - 37530000
[    0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 00000000be01b070 0005C (v01 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: FACP 00000000be024738 000F4 (v04 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 00000000be01b160 095D4 (v02 ALASKA    A M I 00000012 INTL 20051117)
[    0.000000] ACPI: FACS 00000000be037f80 00040
[    0.000000] ACPI: APIC 00000000be024830 00062 (v03 ALASKA    A M I 01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 00000000be024898 0003C (v01 ALASKA    A M I 01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000be0248d8 00038 (v01 ALASKA    A M I 01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 00000000be024910 00495 (v01 IdeRef IdeTable 00001000 INTL 20091112)
[    0.000000] ACPI: SSDT 00000000be024da8 009AA (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 00000000be025758 00A92 (v01  PmRef    CpuPm 00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000011f600000
[    0.000000] Initmem setup node 0 0000000000000000-000000011f600000
[    0.000000]   NODE_DATA [000000011f5fb000 - 000000011f5fffff]
[    0.000000]  [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011b400000-ffff88011e5fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x0011f600
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[8] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009e
[    0.000000]     0: 0x00000100 -> 0x00020000
[    0.000000]     0: 0x00020200 -> 0x00040004
[    0.000000]     0: 0x00040005 -> 0x000bdbf9
[    0.000000]     0: 0x000be61a -> 0x000be61b
[    0.000000]     0: 0x000be65e -> 0x000bedc7
[    0.000000]     0: 0x000befdc -> 0x000bf000
[    0.000000]     0: 0x00100000 -> 0x0011f600
[    0.000000] On node 0 totalpages: 907028
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3921 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 760254 pages, LIFO batch:31
[    0.000000]   Normal zone: 1757 pages used for memmap
[    0.000000]   Normal zone: 126755 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[    0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
[    0.000000] PM: Registered nosave memory: 00000000bdbf9000 - 00000000bdf16000
[    0.000000] PM: Registered nosave memory: 00000000bdf16000 - 00000000bdf17000
[    0.000000] PM: Registered nosave memory: 00000000bdf17000 - 00000000be039000
[    0.000000] PM: Registered nosave memory: 00000000be039000 - 00000000be61a000
[    0.000000] PM: Registered nosave memory: 00000000be61b000 - 00000000be65e000
[    0.000000] PM: Registered nosave memory: 00000000bedc7000 - 00000000befdc000
[    0.000000] PM: Registered nosave memory: 00000000bf000000 - 00000000bf800000
[    0.000000] PM: Registered nosave memory: 00000000bf800000 - 00000000dfa00000
[    0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
[    0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[    0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
[    0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
[    0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[    0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at dfa00000 (gap: dfa00000:18600000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011f200000 s82944 r8192 d23552 u1048576
[    0.000000] pcpu-alloc: s82944 r8192 d23552 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 890930
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=5eea4715-1e59-44f0-97e5-fecccc96d2b8 ro initrd=/install/initrd.gz quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3491100k/4708352k available (3426k kernel code, 1080240k absent, 137012k reserved, 3312k data, 576k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:33024 nr_irqs:512 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.004000] Detected 3093.142 MHz processor.
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6186.28 BogoMIPS (lpj=12372568)
[    0.000005] pid_max: default: 32768 minimum: 301
[    0.000032] Security Framework initialized
[    0.000035] AppArmor: AppArmor disabled by boot time parameter
[    0.000220] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.001299] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.001787] Mount-cache hash table entries: 256
[    0.001867] Initializing cgroup subsys cpuacct
[    0.001869] Initializing cgroup subsys memory
[    0.001876] Initializing cgroup subsys devices
[    0.001878] Initializing cgroup subsys freezer
[    0.001879] Initializing cgroup subsys net_cls
[    0.001881] Initializing cgroup subsys blkio
[    0.001885] Initializing cgroup subsys perf_event
[    0.001909] CPU: Physical Processor ID: 0
[    0.001909] CPU: Processor Core ID: 0
[    0.001913] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.001914] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.001916] mce: CPU supports 7 MCE banks
[    0.001926] CPU0: Thermal monitoring enabled (TM1)
[    0.001931] using mwait in idle threads.
[    0.002256] ACPI: Core revision 20110623
[    0.006584] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.046261] CPU0: Intel(R) Pentium(R) CPU G2120 @ 3.10GHz stepping 09
[    0.152347] Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
[    0.152353] ... version:                3
[    0.152354] ... bit width:              48
[    0.152355] ... generic registers:      8
[    0.152356] ... value mask:             0000ffffffffffff
[    0.152357] ... max period:             000000007fffffff
[    0.152358] ... fixed-purpose events:   3
[    0.152358] ... event mask:             00000007000000ff
[    0.152453] NMI watchdog enabled, takes one hw-pmu counter.
[    0.152532] Booting Node   0, Processors  #1 Ok.
[    0.152534] smpboot cpu 1: start_ip = 99000
[    0.260448] NMI watchdog enabled, takes one hw-pmu counter.
[    0.260470] Brought up 2 CPUs
[    0.260472] Total of 2 processors activated (12372.19 BogoMIPS).
[    0.261692] devtmpfs: initialized
[    0.263766] PM: Registering ACPI NVS region at bdf17000 (1187840 bytes)
[    0.263789] PM: Registering ACPI NVS region at be61b000 (274432 bytes)
[    0.263890] print_constraints: dummy: 
[    0.263927] NET: Registered protocol family 16
[    0.263984] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.263986] ACPI: bus type pci registered
[    0.264031] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.264033] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.269774] PCI: Using configuration type 1 for base access
[    0.270215] bio: create slab <bio-0> at 0
[    0.270275] ACPI: Added _OSI(Module Device)
[    0.270277] ACPI: Added _OSI(Processor Device)
[    0.270278] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.270279] ACPI: Added _OSI(Processor Aggregator Device)
[    0.271255] ACPI: EC: Look up EC in DSDT
[    0.272472] ACPI: Executed 1 blocks of module-level executable AML code
[    0.284664] ACPI: SSDT 00000000bdebe018 0083B (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.284913] ACPI: Dynamic OEM Table Load:
[    0.284915] ACPI: SSDT           (null) 0083B (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
[    0.296533] ACPI: SSDT 00000000bdebfa98 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.296806] ACPI: Dynamic OEM Table Load:
[    0.296807] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20051117)
[    0.308423] ACPI: SSDT 00000000bdebdd98 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.308664] ACPI: Dynamic OEM Table Load:
[    0.308665] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20051117)
[    0.320636] ACPI: Interpreter enabled
[    0.320640] ACPI: (supports S0 S3 S4 S5)
[    0.320656] ACPI: Using IOAPIC for interrupt routing
[    0.325566] ACPI: Power Resource [FN00] (off)
[    0.325625] ACPI: Power Resource [FN01] (off)
[    0.325681] ACPI: Power Resource [FN02] (off)
[    0.325737] ACPI: Power Resource [FN03] (off)
[    0.325793] ACPI: Power Resource [FN04] (off)
[    0.326102] ACPI: No dock devices found.
[    0.326103] HEST: Table not found.
[    0.326106] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.326352] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.326712] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.326713] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.326715] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.326716] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[    0.326718] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[    0.326719] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[    0.326721] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[    0.326722] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[    0.326723] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[    0.326725] pci_root PNP0A08:00: host bridge window [mem 0xdfa00000-0xfeafffff]
[    0.326734] pci 0000:00:00.0: [8086:0150] type 0 class 0x000600
[    0.326763] pci 0000:00:02.0: [8086:0152] type 0 class 0x000300
[    0.326772] pci 0000:00:02.0: reg 10: [mem 0xf7800000-0xf7bfffff 64bit]
[    0.326777] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.326781] pci 0000:00:02.0: reg 20: [io  0xf000-0xf03f]
[    0.326827] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[    0.326848] pci 0000:00:16.0: reg 10: [mem 0xf7c09000-0xf7c0900f 64bit]
[    0.326919] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.326950] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[    0.326969] pci 0000:00:1a.0: reg 10: [mem 0xf7c07000-0xf7c073ff]
[    0.327053] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.327076] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[    0.327090] pci 0000:00:1b.0: reg 10: [mem 0xf7c00000-0xf7c03fff 64bit]
[    0.327152] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.327172] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[    0.327247] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.327273] pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604
[    0.327347] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.327369] pci 0000:00:1c.5: [8086:244e] type 1 class 0x000604
[    0.327443] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.327472] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[    0.327491] pci 0000:00:1d.0: reg 10: [mem 0xf7c06000-0xf7c063ff]
[    0.327575] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.327598] pci 0000:00:1f.0: [8086:1c5c] type 0 class 0x000601
[    0.327712] pci 0000:00:1f.2: [8086:1c00] type 0 class 0x000101
[    0.327725] pci 0000:00:1f.2: reg 10: [io  0xf110-0xf117]
[    0.327731] pci 0000:00:1f.2: reg 14: [io  0xf100-0xf103]
[    0.327738] pci 0000:00:1f.2: reg 18: [io  0xf0f0-0xf0f7]
[    0.327745] pci 0000:00:1f.2: reg 1c: [io  0xf0e0-0xf0e3]
[    0.327751] pci 0000:00:1f.2: reg 20: [io  0xf0d0-0xf0df]
[    0.327758] pci 0000:00:1f.2: reg 24: [io  0xf0c0-0xf0cf]
[    0.327799] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[    0.327812] pci 0000:00:1f.3: reg 10: [mem 0xf7c05000-0xf7c050ff 64bit]
[    0.327831] pci 0000:00:1f.3: reg 20: [io  0xf040-0xf05f]
[    0.327861] pci 0000:00:1f.5: [8086:1c08] type 0 class 0x000101
[    0.327874] pci 0000:00:1f.5: reg 10: [io  0xf0b0-0xf0b7]
[    0.327881] pci 0000:00:1f.5: reg 14: [io  0xf0a0-0xf0a3]
[    0.327887] pci 0000:00:1f.5: reg 18: [io  0xf090-0xf097]
[    0.327894] pci 0000:00:1f.5: reg 1c: [io  0xf080-0xf083]
[    0.327900] pci 0000:00:1f.5: reg 20: [io  0xf070-0xf07f]
[    0.327907] pci 0000:00:1f.5: reg 24: [io  0xf060-0xf06f]
[    0.327985] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.328033] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[    0.328036] pci 0000:00:1c.4:   bridge window [io  0xe000-0xefff]
[    0.328043] pci 0000:00:1c.4:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.328105] pci 0000:03:00.0: [8086:244e] type 1 class 0x000604
[    0.328253] pci 0000:03:00.0: supports D1 D2
[    0.328254] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.328283] pci 0000:00:1c.5: PCI bridge to [bus 03-04] (subtractive decode)
[    0.328292] pci 0000:00:1c.5:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.328294] pci 0000:00:1c.5:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.328295] pci 0000:00:1c.5:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.328297] pci 0000:00:1c.5:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[    0.328298] pci 0000:00:1c.5:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.328300] pci 0000:00:1c.5:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.328301] pci 0000:00:1c.5:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[    0.328303] pci 0000:00:1c.5:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[    0.328304] pci 0000:00:1c.5:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[    0.328309] pci 0000:00:1c.5:   bridge window [mem 0xdfa00000-0xfeafffff] (subtractive decode)
[    0.328454] pci 0000:03:00.0: PCI bridge to [bus 04-04] (subtractive decode)
[    0.328479] pci 0000:03:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[    0.328480] pci 0000:03:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[    0.328482] pci 0000:03:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[    0.328483] pci 0000:03:00.0:   bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[    0.328485] pci 0000:03:00.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.328487] pci 0000:03:00.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.328488] pci 0000:03:00.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.328490] pci 0000:03:00.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[    0.328491] pci 0000:03:00.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.328493] pci 0000:03:00.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.328494] pci 0000:03:00.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[    0.328496] pci 0000:03:00.0:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[    0.328497] pci 0000:03:00.0:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[    0.328499] pci 0000:03:00.0:   bridge window [mem 0xdfa00000-0xfeafffff] (subtractive decode)
[    0.328526] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.328651] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.328682] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[    0.328709] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[    0.328816]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.328969]  pci0000:00: ACPI _OSC control (0x18) granted
[    0.331990] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.332025] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.332057] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.332090] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.332121] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.332154] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.332186] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.332218] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.332286] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.332290] vgaarb: loaded
[    0.332291] vgaarb: bridge control possible 0000:00:02.0
[    0.332319] PCI: Using ACPI for IRQ routing
[    0.333744] PCI: pci_cache_line_size set to 64 bytes
[    0.333786] reserve RAM buffer: 000000000009ec00 - 000000000009ffff 
[    0.333788] reserve RAM buffer: 0000000040004000 - 0000000043ffffff 
[    0.333789] reserve RAM buffer: 00000000bdbf9000 - 00000000bfffffff 
[    0.333791] reserve RAM buffer: 00000000be61b000 - 00000000bfffffff 
[    0.333793] reserve RAM buffer: 00000000bedc7000 - 00000000bfffffff 
[    0.333794] reserve RAM buffer: 00000000bf000000 - 00000000bfffffff 
[    0.333796] reserve RAM buffer: 000000011f600000 - 000000011fffffff 
[    0.333869] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.333873] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.335883] Switching to clocksource hpet
[    0.337042] pnp: PnP ACPI init
[    0.337051] ACPI: bus type pnp registered
[    0.337240] pnp 00:00: [bus 00-3e]
[    0.337242] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.337243] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.337244] pnp 00:00: [io  0x0d00-0xffff window]
[    0.337245] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.337247] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.337248] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.337249] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.337250] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.337252] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.337253] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.337254] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.337255] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.337257] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.337258] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.337259] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.337261] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.337262] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.337263] pnp 00:00: [mem 0xdfa00000-0xfeafffff window]
[    0.337265] pnp 00:00: [mem 0x00010000-0x0001ffff window]
[    0.337302] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.337320] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[    0.337344] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.337346] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.337354] pnp 00:02: [io  0x0000-0x001f]
[    0.337355] pnp 00:02: [io  0x0081-0x0091]
[    0.337356] pnp 00:02: [io  0x0093-0x009f]
[    0.337357] pnp 00:02: [io  0x00c0-0x00df]
[    0.337359] pnp 00:02: [dma 4]
[    0.337374] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.337379] pnp 00:03: [mem 0xff000000-0xffffffff]
[    0.337392] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[    0.337445] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[    0.337461] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.337468] pnp 00:05: [io  0x002e-0x002f]
[    0.337469] pnp 00:05: [io  0x004e-0x004f]
[    0.337470] pnp 00:05: [io  0x0061]
[    0.337471] pnp 00:05: [io  0x0063]
[    0.337472] pnp 00:05: [io  0x0065]
[    0.337473] pnp 00:05: [io  0x0067]
[    0.337474] pnp 00:05: [io  0x0070]
[    0.337475] pnp 00:05: [io  0x0080]
[    0.337476] pnp 00:05: [io  0x0092]
[    0.337477] pnp 00:05: [io  0x00b2-0x00b3]
[    0.337478] pnp 00:05: [io  0x0680-0x069f]
[    0.337479] pnp 00:05: [io  0x0200-0x020f]
[    0.337480] pnp 00:05: [io  0xffff]
[    0.337481] pnp 00:05: [io  0xffff]
[    0.337482] pnp 00:05: [io  0x0400-0x0453]
[    0.337483] pnp 00:05: [io  0x0458-0x047f]
[    0.337484] pnp 00:05: [io  0x0500-0x057f]
[    0.337511] system 00:05: [io  0x0680-0x069f] has been reserved
[    0.337512] system 00:05: [io  0x0200-0x020f] has been reserved
[    0.337514] system 00:05: [io  0xffff] has been reserved
[    0.337515] system 00:05: [io  0xffff] has been reserved
[    0.337517] system 00:05: [io  0x0400-0x0453] has been reserved
[    0.337518] system 00:05: [io  0x0458-0x047f] has been reserved
[    0.337520] system 00:05: [io  0x0500-0x057f] has been reserved
[    0.337521] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.337527] pnp 00:06: [io  0x0070-0x0077]
[    0.337533] pnp 00:06: [irq 8]
[    0.337548] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.337566] pnp 00:07: [io  0x0454-0x0457]
[    0.337590] system 00:07: [io  0x0454-0x0457] has been reserved
[    0.337592] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.337666] pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
[    0.337667] pnp 00:08: [io  0x0a00-0x0a0f]
[    0.337668] pnp 00:08: [io  0x0a30-0x0a3f]
[    0.337669] pnp 00:08: [io  0x0a20-0x0a2f]
[    0.337693] system 00:08: [io  0x0a00-0x0a0f] has been reserved
[    0.337695] system 00:08: [io  0x0a30-0x0a3f] has been reserved
[    0.337696] system 00:08: [io  0x0a20-0x0a2f] has been reserved
[    0.337698] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.337908] pnp 00:09: [io  0x03f8-0x03ff]
[    0.337912] pnp 00:09: [irq 4]
[    0.337913] pnp 00:09: [dma 0 disabled]
[    0.337952] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.338231] pnp 00:0a: [io  0x0378-0x037f]
[    0.338232] pnp 00:0a: [io  0x0778-0x077f]
[    0.338236] pnp 00:0a: [irq 5]
[    0.338237] pnp 00:0a: [dma 3]
[    0.338353] pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.338367] pnp 00:0b: [io  0x0010-0x001f]
[    0.338368] pnp 00:0b: [io  0x0022-0x003f]
[    0.338369] pnp 00:0b: [io  0x0044-0x005f]
[    0.338370] pnp 00:0b: [io  0x0062-0x0063]
[    0.338371] pnp 00:0b: [io  0x0065-0x006f]
[    0.338372] pnp 00:0b: [io  0x0072-0x007f]
[    0.338373] pnp 00:0b: [io  0x0080]
[    0.338375] pnp 00:0b: [io  0x0084-0x0086]
[    0.338376] pnp 00:0b: [io  0x0088]
[    0.338377] pnp 00:0b: [io  0x008c-0x008e]
[    0.338378] pnp 00:0b: [io  0x0090-0x009f]
[    0.338379] pnp 00:0b: [io  0x00a2-0x00bf]
[    0.338380] pnp 00:0b: [io  0x00e0-0x00ef]
[    0.338381] pnp 00:0b: [io  0x04d0-0x04d1]
[    0.338407] system 00:0b: [io  0x04d0-0x04d1] has been reserved
[    0.338409] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.338415] pnp 00:0c: [io  0x00f0-0x00ff]
[    0.338419] pnp 00:0c: [irq 13]
[    0.338434] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.338586] pnp 00:0d: [mem 0xfed1c000-0xfed1ffff]
[    0.338587] pnp 00:0d: [mem 0xfed10000-0xfed17fff]
[    0.338588] pnp 00:0d: [mem 0xfed18000-0xfed18fff]
[    0.338589] pnp 00:0d: [mem 0xfed19000-0xfed19fff]
[    0.338590] pnp 00:0d: [mem 0xf8000000-0xfbffffff]
[    0.338592] pnp 00:0d: [mem 0xfed20000-0xfed3ffff]
[    0.338593] pnp 00:0d: [mem 0xfed90000-0xfed93fff]
[    0.338594] pnp 00:0d: [mem 0xfed45000-0xfed8ffff]
[    0.338595] pnp 00:0d: [mem 0xff000000-0xffffffff]
[    0.338596] pnp 00:0d: [mem 0xfee00000-0xfeefffff]
[    0.338598] pnp 00:0d: [mem 0xdfa00000-0xdfa00fff]
[    0.338635] system 00:0d: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.338637] system 00:0d: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.338638] system 00:0d: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.338640] system 00:0d: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.338642] system 00:0d: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.338644] system 00:0d: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.338646] system 00:0d: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.338648] system 00:0d: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.338649] system 00:0d: [mem 0xff000000-0xffffffff] has been reserved
[    0.338651] system 00:0d: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.338653] system 00:0d: [mem 0xdfa00000-0xdfa00fff] has been reserved
[    0.338654] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.338750] pnp 00:0e: [mem 0x20000000-0x201fffff]
[    0.338751] pnp 00:0e: [mem 0x40004000-0x40004fff]
[    0.338789] system 00:0e: [mem 0x20000000-0x201fffff] has been reserved
[    0.338791] system 00:0e: [mem 0x40004000-0x40004fff] has been reserved
[    0.338793] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.338807] pnp: PnP ACPI: found 15 devices
[    0.338808] ACPI: ACPI bus type pnp unregistered
[    0.344715] PCI: max bus depth: 2 pci_try_num: 3
[    0.344752] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[    0.344762] pci 0000:00:1c.4: PCI bridge to [bus 02-02]
[    0.344764] pci 0000:00:1c.4:   bridge window [io  0xe000-0xefff]
[    0.344770] pci 0000:00:1c.4:   bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.344776] pci 0000:03:00.0: PCI bridge to [bus 04-04]
[    0.344797] pci 0000:00:1c.5: PCI bridge to [bus 03-04]
[    0.344818] pci 0000:00:1c.0: setting latency timer to 64
[    0.344823] pci 0000:00:1c.4: enabling device (0000 -> 0003)
[    0.344828] pci 0000:00:1c.4: setting latency timer to 64
[    0.344836] pci 0000:00:1c.5: setting latency timer to 64
[    0.344848] pci 0000:03:00.0: setting latency timer to 64
[    0.344852] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.344853] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.344854] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.344856] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.344857] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.344858] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.344860] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[    0.344861] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[    0.344862] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[    0.344864] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff]
[    0.344865] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.344867] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[    0.344868] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
[    0.344869] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
[    0.344870] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[    0.344872] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.344873] pci_bus 0000:03: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.344874] pci_bus 0000:03: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.344876] pci_bus 0000:03: resource 10 [mem 0x000dc000-0x000dffff]
[    0.344877] pci_bus 0000:03: resource 11 [mem 0x000e0000-0x000e3fff]
[    0.344878] pci_bus 0000:03: resource 12 [mem 0x000e4000-0x000e7fff]
[    0.344880] pci_bus 0000:03: resource 13 [mem 0xdfa00000-0xfeafffff]
[    0.344881] pci_bus 0000:04: resource 8 [io  0x0000-0x0cf7]
[    0.344882] pci_bus 0000:04: resource 9 [io  0x0d00-0xffff]
[    0.344884] pci_bus 0000:04: resource 10 [mem 0x000a0000-0x000bffff]
[    0.344885] pci_bus 0000:04: resource 11 [mem 0x000d0000-0x000d3fff]
[    0.344886] pci_bus 0000:04: resource 12 [mem 0x000d4000-0x000d7fff]
[    0.344887] pci_bus 0000:04: resource 13 [mem 0x000d8000-0x000dbfff]
[    0.344889] pci_bus 0000:04: resource 14 [mem 0x000dc000-0x000dffff]
[    0.344890] pci_bus 0000:04: resource 15 [mem 0x000e0000-0x000e3fff]
[    0.344891] pci_bus 0000:04: resource 16 [mem 0x000e4000-0x000e7fff]
[    0.344893] pci_bus 0000:04: resource 17 [mem 0xdfa00000-0xfeafffff]
[    0.344931] NET: Registered protocol family 2
[    0.345012] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.345575] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.347465] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.347709] TCP: Hash tables configured (established 524288 bind 65536)
[    0.347711] TCP reno registered
[    0.347718] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.347738] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.347827] NET: Registered protocol family 1
[    0.347838] pci 0000:00:02.0: Boot video device
[    0.387898] PCI: CLS 64 bytes, default 64
[    0.387950] Unpacking initramfs...
[    0.549679] Freeing initrd memory: 11008k freed
[    0.550982] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.550985] Placing 64MB software IO TLB between ffff8800b9bf9000 - ffff8800bdbf9000
[    0.550986] software IO TLB at phys 0xb9bf9000 - 0xbdbf9000
[    0.551265] audit: initializing netlink socket (disabled)
[    0.551273] type=2000 audit(1391284730.424:1): initialized
[    0.562546] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.562923] VFS: Disk quotas dquot_6.5.2
[    0.562942] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.562989] msgmni has been set to 6840
[    0.563088] alg: No test for stdrng (krng)
[    0.563106] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.563108] io scheduler noop registered
[    0.563110] io scheduler deadline registered
[    0.563121] io scheduler cfq registered (default)
[    0.563261] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.563275] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.563277] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.563546] intel_idle: MWAIT substates: 0x1120
[    0.563547] intel_idle: v0.4 model 0x3A
[    0.563548] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.563576] ERST: Table is not found!
[    0.563577] GHES: HEST is not enabled!
[    0.563611] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.584011] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.644335] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.644557] Linux agpgart interface v0.103
[    0.644605] agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset
[    0.644668] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    0.645283] agpgart-intel 0000:00:00.0: detected 524288K stolen memory
[    0.645367] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[    0.645446] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.645818] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.645822] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.645897] mousedev: PS/2 mouse device common for all mice
[    0.645928] rtc_cmos 00:06: RTC can wake from S4
[    0.646016] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    0.646041] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.646069] cpuidle: using governor ladder
[    0.646096] cpuidle: using governor menu
[    0.646205] TCP cubic registered
[    0.646280] NET: Registered protocol family 10
[    0.646551] Mobile IPv6
[    0.646553] NET: Registered protocol family 17
[    0.646555] Registering the dns_resolver key type
[    0.646701] PM: Hibernation image not present or could not be loaded.
[    0.646708] registered taskstats version 1
[    0.647028] rtc_cmos 00:06: setting system clock to 2014-02-01 19:58:51 UTC (1391284731)
[    0.647077] Initializing network drop monitor service
[    0.647742] Freeing unused kernel memory: 576k freed
[    0.647796] Write protecting the kernel read-only data: 6144k
[    0.649332] Freeing unused kernel memory: 652k freed
[    0.650882] Freeing unused kernel memory: 688k freed
[    0.718082] udevd[51]: starting version 175
[    0.730626] SCSI subsystem initialized
[    0.740663] usbcore: registered new interface driver usbfs
[    0.740680] usbcore: registered new interface driver hub
[    0.750384] libata version 3.00 loaded.
[    0.750619] ata_piix 0000:00:1f.2: version 2.13
[    0.750637] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.751844] usbcore: registered new device driver usb
[    0.752107] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.763390] ACPI: Fan [FAN0] (off)
[    0.763414] ACPI: Fan [FAN1] (off)
[    0.763436] ACPI: Fan [FAN2] (off)
[    0.763455] ACPI: Fan [FAN3] (off)
[    0.763553] ACPI: Fan [FAN4] (off)
[    0.780094] thermal LNXTHERM:00: registered as thermal_zone0
[    0.780096] ACPI: Thermal Zone [TZ00] (28 C)
[    0.780209] thermal LNXTHERM:01: registered as thermal_zone1
[    0.780210] ACPI: Thermal Zone [TZ01] (30 C)
[    0.903810] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.903994] scsi0 : ata_piix
[    0.904055] scsi1 : ata_piix
[    0.904165] ata1: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 19
[    0.904169] ata2: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 19
[    0.904188] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    1.059748] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
[    1.059773] ata_piix 0000:00:1f.5: setting latency timer to 64
[    1.059901] scsi2 : ata_piix
[    1.059937] scsi3 : ata_piix
[    1.060017] ata3: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 19
[    1.060019] ata4: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 19
[    1.060055] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.060058] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    1.060076] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.060096] ehci_hcd 0000:00:1a.0: debug port 2
[    1.063970] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    1.063980] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7c07000
[    1.079736] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.079782] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.079783] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.079785] usb usb1: Product: EHCI Host Controller
[    1.079786] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[    1.079787] usb usb1: SerialNumber: 0000:00:1a.0
[    1.079920] hub 1-0:1.0: USB hub found
[    1.079925] hub 1-0:1.0: 2 ports detected
[    1.079987] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.079990] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    1.079994] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.080012] ehci_hcd 0000:00:1d.0: debug port 2
[    1.083895] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    1.083907] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7c06000
[    1.099734] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.099776] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.099778] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.099779] usb usb2: Product: EHCI Host Controller
[    1.099780] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[    1.099781] usb usb2: SerialNumber: 0000:00:1d.0
[    1.099915] hub 2-0:1.0: USB hub found
[    1.099919] hub 2-0:1.0: 2 ports detected
[    1.391671] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    1.524092] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    1.524096] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.524358] hub 1-1:1.0: USB hub found
[    1.524451] hub 1-1:1.0: 4 ports detected
[    1.547636] Refined TSC clocksource calibration: 3092.971 MHz.
[    1.547642] Switching to clocksource tsc
[    1.635621] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[    1.767909] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    1.767914] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.768203] hub 2-1:1.0: USB hub found
[    1.768270] hub 2-1:1.0: 6 ports detected
[    1.839633] usb 1-1.1: new low-speed USB device number 3 using ehci_hcd
[    1.937120] usb 1-1.1: New USB device found, idVendor=413c, idProduct=2107
[    1.937125] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.937128] usb 1-1.1: Product: Dell USB Entry Keyboard
[    1.937130] usb 1-1.1: Manufacturer: DELL
[    2.039604] usb 2-1.5: new high-speed USB device number 3 using ehci_hcd
[    2.148948] usb 2-1.5: New USB device found, idVendor=1b75, idProduct=3072
[    2.148953] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.148955] usb 2-1.5: Product: 802.11 n WLAN
[    2.148957] usb 2-1.5: Manufacturer: Ralink
[    2.148959] usb 2-1.5: SerialNumber: 1.0
[    2.219563] usb 2-1.6: new full-speed USB device number 4 using ehci_hcd
[    2.259475] ata1.01: failed to resume link (SControl 0)
[    2.267470] ata2.01: failed to resume link (SControl 0)
[    2.313785] usb 2-1.6: New USB device found, idVendor=09da, idProduct=0080
[    2.313790] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.313793] usb 2-1.6: Product: USB Mouse
[    2.313795] usb 2-1.6: Manufacturer: A4Tech
[    2.415505] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 330)
[    2.415516] ata1.01: SATA link down (SStatus 0 SControl 0)
[    2.423520] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 330)
[    2.423540] ata2.01: SATA link down (SStatus 0 SControl 0)
[    2.423553] ata2.01: link offline, clearing class 3 to NONE
[    2.424084] ata1.00: ATA-8: WDC WD10EZEX-00RKKA0, 80.00A80, max UDMA/133
[    2.424089] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.431675] ata2.00: ATAPI: TSSTcorp CDDVDW SH-224DB, SB00, max UDMA/100
[    2.432079] ata1.00: configured for UDMA/133
[    2.432247] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10EZEX-00R 80.0 PQ: 0 ANSI: 5
[    2.447669] ata2.00: configured for UDMA/100
[    2.450251] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-224DB  SB00 PQ: 0 ANSI: 5
[    2.454181] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    2.454183] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.454207] sd 0:0:0:0: [sda] Write Protect is off
[    2.454208] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.454218] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.455085] input: DELL Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input0
[    2.455157] generic-usb 0003:413C:2107.0001: input,hidraw0: USB HID v1.10 Keyboard [DELL Dell USB Entry Keyboard] on usb-0000:00:1a.0-1.1/input0
[    2.456583] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.456609] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.456726] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input1
[    2.456767] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.456846] generic-usb 0003:09DA:0080.0002: input,hidraw1: USB HID v1.11 Mouse [A4Tech USB Mouse] on usb-0000:00:1d.0-1.6/input0
[    2.456857] usbcore: registered new interface driver usbhid
[    2.456858] usbhid: USB HID core driver
[    2.501218]  sda: sda1 sda2 < sda5 > sda3 sda4
[    2.501893] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.503765] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.503798] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    3.073868] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    4.125111] udevd[369]: starting version 175
[    4.303983] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    4.303988] ACPI: Power Button [PWRB]
[    4.304028] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    4.304030] ACPI: Power Button [PWRF]
[    4.305044] ACPI: Requesting acpi_cpufreq
[    4.405282] iTCO_vendor_support: vendor-support=0
[    4.405838] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[    4.405893] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[    4.467921] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    4.528454] parport_pc 00:0a: reported by Plug and Play ACPI
[    4.528514] parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP,TRISTATE]
[    4.601128] ACPI: resource 0000:00:1f.3 [io  0xf040-0xf05f] conflicts with ACPI region SMBI [io 0xf040-0xf04f]
[    4.601130] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.626351] snd_hda_intel 0000:00:1b.0: irq 40 for MSI/MSI-X
[    4.626372] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[    4.629135] [drm] Initialized drm 1.1.0 20060810
[    4.807033] i915 0000:00:02.0: setting latency timer to 64
[    4.836253] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[    4.836254] [drm] MTRR allocation failed.  Graphics performance may suffer.
[    4.836383] i915 0000:00:02.0: irq 41 for MSI/MSI-X
[    4.836387] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    4.836388] [drm] Driver supports precise vblank timestamp query.
[    4.836925] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem :o wns=io+mem
[    4.873542] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[    5.113689] fbcon: inteldrmfb (fb0) is primary device
[    5.213616] cfg80211: Calling CRDA to update world regulatory domain
[    5.293608] Console: switching to colour frame buffer device 180x56
[    5.297101] fb0: inteldrmfb frame buffer device
[    5.297102] drm: registered panic notifier
[    5.307146] acpi device:4d: registered as cooling_device7
[    5.307286] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[    5.307323] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    5.307335] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    5.394955] usb 2-1.5: reset high-speed USB device number 3 using ehci_hcd
[    5.537630] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    5.538090] Registered led device: rt2800usb-phy0::radio
[    5.538110] Registered led device: rt2800usb-phy0::assoc
[    5.538129] Registered led device: rt2800usb-phy0::quality
[    5.538161] usbcore: registered new interface driver rt2800usb
[    5.657479] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[    5.657564] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[    5.657717] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[    5.705009] cfg80211: World regulatory domain updated:
[    5.705012] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    5.705014] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    5.705016] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    5.705017] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    5.705019] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    5.705021] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.594465] EXT4-fs (sda3): re-mounted. Opts: (null)
[    6.758820] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[    6.905551] device-mapper: uevent: version 1.0.3
[    6.905867] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [EMAIL="dm-devel@redhat.com"]dm-devel@redhat.com[/EMAIL]
[   13.622090] loop: module loaded
[   14.415669] RPC: Registered named UNIX socket transport module.
[   14.415673] RPC: Registered udp transport module.
[   14.415675] RPC: Registered tcp transport module.
[   14.415677] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   14.438568] FS-Cache: Loaded
[   14.460874] FS-Cache: Netfs 'nfs' registered for caching
[   14.472145] Installing knfsd (copyright (C) 1996 [EMAIL="okir@monad.swb.de"]okir@monad.swb.de[/EMAIL]).
[   14.694820] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   14.699533] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   14.704049] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   14.708484] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   14.713071] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   14.717608] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   14.722148] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   14.726586] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   14.731042] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   14.735584] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   14.739998] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   14.744356] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   14.750584] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   14.757538] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   14.764971] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   14.769304] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   14.773595] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   14.777676] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   14.781822] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   14.785971] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   14.790111] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   14.794361] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   14.798507] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   14.802693] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   14.806837] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   14.810962] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   14.816606] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   14.822167] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   14.828230] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   14.834437] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   14.841123] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   14.847766] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   14.855328] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   14.862368] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   14.867219] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   14.871989] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   14.876821] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   16.364509] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input6
[   16.554268] rt2800usb 2-1.5:1.0: firmware: agent loaded rt2870.bin into memory
[   16.802859] Bluetooth: Core ver 2.16
[   16.802882] NET: Registered protocol family 31
[   16.802883] Bluetooth: HCI device and connection manager initialized
[   16.802885] Bluetooth: HCI socket layer initialized
[   16.802886] Bluetooth: L2CAP socket layer initialized
[   16.802889] Bluetooth: SCO socket layer initialized
[   16.820847] Bluetooth: RFCOMM TTY layer initialized
[   16.820850] Bluetooth: RFCOMM socket layer initialized
[   16.820852] Bluetooth: RFCOMM ver 1.11
[   16.831373] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   16.831375] Bluetooth: BNEP filters: protocol multicast
[   16.868660] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   17.315442] lp0: using parport0 (interrupt-driven).
[   17.400674] ppdev: user-space parallel port driver
[   18.997186] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[   19.528591] wlan0: authenticate with d8:6c:e9:57:53:f2 (try 1)
[   19.531232] wlan0: authenticated
[   19.547711] wlan0: associate with d8:6c:e9:57:53:f2 (try 1)
[   19.550618] wlan0: RX AssocResp from d8:6c:e9:57:53:f2 (capab=0x411 status=0 aid=2)
[   19.550620] wlan0: associated
[   19.575492] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   30.657182] wlan0: no IPv6 routers present
[   48.048618] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   48.243298] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   48.249560] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   48.281562] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   48.329735] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   48.345896] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   48.361809] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   48.437608] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   48.505549] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[   48.517592] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[  114.654787] nepomukservices[3911]: segfault at 0 ip           (null) sp 00007fffcaf39c68 error 14 in nepomukservicestub[400000+7000]
[  165.688992] nepomukservices[4284]: segfault at 0 ip           (null) sp 00007fff477acf68 error 14 in nepomukservicestub[400000+7000]
[  191.094417] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[  191.096539] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[  191.102015] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[  191.133909] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[  191.181880] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[  191.198311] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[  191.214222] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[  191.238244] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[  191.306085] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[  191.321930] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[  242.291711] nepomukservices[4651]: segfault at 0 ip           (null) sp 00007fff503220e8 error 14 in nepomukservicestub[400000+7000]
[  469.342727] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[  491.712621] snd_hda_intel 0000:00:1b.0: irq 40 for MSI/MSI-X
[  491.712652] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[  491.777148] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[  491.777208] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[  491.777353] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[  491.824198] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[  491.833655] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[  491.839401] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[  491.871395] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[  491.919362] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[  491.936150] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[  491.952025] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[  491.979389] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[  515.178930] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[ 4046.535281] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[ 4056.980884] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume)
[ 4269.860411] hda_codec: num_steps = 0 for NID=0xc (ctl = Front Playback Volume
)


cat /proc/asound/cards

Kod: Zaznacz cały

0 [PCH            ]: HDA-Intel - HDA Intel PCH
 HDA Intel PCH at 0xf7c00000 irq 40

cat /proc/asound/modules

Kod: Zaznacz cały

 0 snd_hda_intel

cat /proc/asound/version

Kod: Zaznacz cały

Advanced Linux Sound Architecture Driver Version 1.0.24.

: 01 lutego 2014, 21:39
autor: Rafal_F
OK, tak do niczego nie dojdziemy, uzupełnij informacje (punkty 1,2,3,4 i wyniki skryptu z punktu 8.): threads/12771-Zakładając-temat-przeczyt ... #post81406

: 01 lutego 2014, 21:52
autor: Armur
uname -a

Kod: Zaznacz cały

Linux KOMPUTER 3.2.0-4-amd64 #1 SMP Debian 3.2.51-1 x86_64 GNU/Linux 

dpkg --print-architecture

Kod: Zaznacz cały

amd64 
lspci -k

Kod: Zaznacz cały

00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller (rev 09)                                                                                                     
        Subsystem: Giga-byte Technology Device 5000                                                                                                                                                        
        Kernel driver in use: agpgart-intel                                                                                                                                                                
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller (rev 09)                                                                                   
        Subsystem: Giga-byte Technology Device d000                                                                                                                                                        
        Kernel driver in use: i915                                                                                                                                                                         
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)                                                                                         
        Subsystem: Giga-byte Technology Device 1c3a
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
        Subsystem: Giga-byte Technology Device 5006
        Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
        Subsystem: Giga-byte Technology Device a002
        Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
        Kernel driver in use: pcieport
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5)
        Kernel driver in use: pcieport
00:1c.5 PCI bridge: Intel Corporation 82801 PCI Bridge (rev b5)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
        Subsystem: Giga-byte Technology Device 5006
        Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge: Intel Corporation H61 Express Chipset Family LPC Controller (rev 05)
        Subsystem: Giga-byte Technology Device 5001
00:1f.2 IDE interface: Intel Corporation 6 Series/C200 Series Chipset Family 4 port SATA IDE Controller (rev 05)
        Subsystem: Giga-byte Technology Device b005
        Kernel driver in use: ata_piix
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
        Subsystem: Giga-byte Technology Device 5001
00:1f.5 IDE interface: Intel Corporation 6 Series/C200 Series Chipset Family 2 port SATA IDE Controller (rev 05)
        Subsystem: Giga-byte Technology Device b002
        Kernel driver in use: ata_piix
03:00.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 41)
lspci -n

Kod: Zaznacz cały

00:00.0 0600: 8086:0150 (rev 09)
00:02.0 0300: 8086:0152 (rev 09)
00:16.0 0780: 8086:1c3a (rev 04)
00:1a.0 0c03: 8086:1c2d (rev 05)
00:1b.0 0403: 8086:1c20 (rev 05)
00:1c.0 0604: 8086:1c10 (rev b5)
00:1c.4 0604: 8086:1c18 (rev b5)
00:1c.5 0604: 8086:244e (rev b5)
00:1d.0 0c03: 8086:1c26 (rev 05)
00:1f.0 0601: 8086:1c5c (rev 05)
00:1f.2 0101: 8086:1c00 (rev 05)
00:1f.3 0c05: 8086:1c22 (rev 05)
00:1f.5 0101: 8086:1c08 (rev 05)
03:00.0 0604: 8086:244e (rev 41)
Wynik wykonania skryptu z punktu 8:
http://www.alsa-project.org/db/?f=49238 ... e54df7ce15

: 01 lutego 2014, 22:12
autor: Rafal_F
Spróbujmy tak: edytuj plik:

Kod: Zaznacz cały

/etc/modprobe.d/alsa-base.conf
Dopisz tam taką linijkę:

Kod: Zaznacz cały

options snd-hda-intel model=generic
Zrób reboot i sprawdź w alsamixer.

: 01 lutego 2014, 22:35
autor: Armur
Pomogło :) .

Dobrze główkuję iż nie był ładowany moduł odpowiedzialny za tą kartę?

Jeśli to nie tajemnica, to po czym przeglądając zamieszczone przeze mnie wyniki pleceń, udało się zorientować czego może brakować (może się czegoś nauczę i przy nowym komputerze nie będę już zawracał głowy ;) )?

: 02 lutego 2014, 02:19
autor: Rafal_F
Moduł był ładowany:

Kod: Zaznacz cały

00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
        Subsystem: Giga-byte Technology Device a002
 [b]Kernel driver in use: snd_hda_intel[/b]
ale ze złymi parametrami.

Rozwiązanie znalazłem w google: https://www.google.pl/search?client=ope ... el=suggest (2-gi link).

Problem dotyczy kart opartych na chipsecie: ALC887.

: 02 lutego 2014, 12:37
autor: Armur
Bardzo dziękuję za pomoc i informacje :) .
Pozdrawiam.