Polskie Forum Użytkowników Debiana

Witam. Mam laptopa Dell C600 z karta ati. Mam stery ati i jest akceleracja ale rozdzielczosc jest bardzo niska i obraz posrany ze nie mozna nic robic. Srodowisko graficzne xfce4 i w ustawieniach nie ma zadnej rozdzielczosci i nie mozna nic zmienic. Na sterach vesa mam dobra rozdzielczosc i moge zmieniac na jaka chce i jest w opcjach xfce ale wiadomo ze akceleracji nie ma i np ciezko ogladac film bo skacze. Jak zmienic rozdzielczosc na tych sterownikach? Pozdrawiam.

Kod: Zaznacz cały

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	FontPath	"/usr/share/fonts/X11/misc"
	FontPath	"/usr/X11R6/lib/X11/fonts/misc"
	FontPath	"/usr/share/fonts/X11/cyrillic"
	FontPath	"/usr/X11R6/lib/X11/fonts/cyrillic"
	FontPath	"/usr/share/fonts/X11/100dpi/:unscaled"
	FontPath	"/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/share/fonts/X11/75dpi/:unscaled"
	FontPath	"/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/share/fonts/X11/Type1"
	FontPath	"/usr/X11R6/lib/X11/fonts/Type1"
	FontPath	"/usr/share/fonts/X11/100dpi"
	FontPath	"/usr/X11R6/lib/X11/fonts/100dpi"
	FontPath	"/usr/share/fonts/X11/75dpi"
	FontPath	"/usr/X11R6/lib/X11/fonts/75dpi"
	# path to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load	"i2c"
	Load	"bitmap"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"vbe"
	Load	"synaptics"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"pl"
EndSection

Section "InputDevice"
	Identifier	"Synaptics Mouse"
	Driver		"Synaptics"
	Option		"Device"		"/dev/psaux"
	Option		"Protocol"		"PS/2"
	Option		"LeftEdge"		"1700"
	Option		"RightEdge"		"5300"
	Option		"TopEdge"		"1700"
	Option		"BottomEdge"		"4200"
	Option		"FingerLow"		"25"
	Option		"FingerHigh"		"30"
	Option		"MaxTapTime"		"180"
	Option		"MaxTapMove"		"220"
	Option		"VertScrollDelta"	"100"
	Option		"MinSpeed"		"0.09"
	Option		"MaxSpeed"		"0.18"
	Option		"AccelFactor"		"0.0015"
	Option		"SHMConfig"		"on"
EndSection

Section "Device"
	Identifier	"ATI Technologies Inc Rage Mobility M3 AGP 2x"
	Driver		"ati"
	BusID		"PCI:1:0:0"
EndSection

Section "Monitor"
	Identifier	"Generic Monitor"
	Option		"DPMS"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI Technologies Inc Rage Mobility M3 AGP 2x"
	Monitor		"Generic Monitor"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Synaptics Mouse"	"CorePointer"
EndSection

Section "DRI"
	Mode	0666
EndSection

A jaką chcesz mieć rozdziałke?

Chce miec 1024x768 i pod vesa albo wczesniej na windowsie tak jest a na ati jest jakas nizsza i mam po srodku pasek i ciezko cos w ogole robic.

dopisz do każdej (na początku) lini:

Kod: Zaznacz cały

"1024x768" "800x600" "640x480"

rozdzielczość która chcesz ustawić, oczywiście w znacznikach " "

Tak to u mnie wygląda:

Kod: Zaznacz cały

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI Technologies Inc RV280 [Radeon 9200 SE]"
	Monitor		"LR762"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
EndSection

mulat pisze:dopisz do każdej (na początku) lini:

Kod: Zaznacz cały

"1024x768" "800x600" "640x480"

rozdzielczość która chcesz ustawić, oczywiście w znacznikach " "

Tak to u mnie wygląda:

Kod: Zaznacz cały

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI Technologies Inc RV280 [Radeon 9200 SE]"
	Monitor		"LR762"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480"
	EndSubSection
EndSection

Jak sie uzywa glembi kolorow "24" to wystarczy chyba dodac tylko do ostatniej linijki rozdzielczosc, na ktorej nam zalezy (w sensie do SubSection "Display" Depth 24.

Jak widac w moim xorg.conf mialem dopisane rozdzielczosci i nic to nie dalo.
Jednak znalazlem rozwiazanie

Do xorg.conf w sekcji monitor musialem dopisac parametry odswiezania monitora.

Kod: Zaznacz cały

Section "Monitor"
	Identifier	"Generic Monitor"
	HorizSync	31-68
	VertRefresh	50-85
	Option		"DPMS"
EndSection

Polskie Forum Użytkowników Debiana

Stery ati jest akceleracja nie moge zmienic rozdzielczosci

Stery ati jest akceleracja nie moge zmienic rozdzielczosci