[+] Instalacja bumblebee
: 02 października 2013, 22:24
Witam,
mam problem z odpaleniem karty nvidia z bumblebee. Do tej pory zawsze mi się (prawie) ładnie wszystko instalowało. Wczoraj przeinstalowałem sobie Debiana Jessie z podstawową konfiguracją + mate. Doinstalowałem xorg-a i wziąłem się za nvidię. Niby wszystko się poprawnie instaluje, ale nie działa sterownik nvidii.
/var/log/Xorg.0.log
/etc/bumblebee/bumblebee.conf
Czy coś mi umknęło przy instalacji ?
mam problem z odpaleniem karty nvidia z bumblebee. Do tej pory zawsze mi się (prawie) ładnie wszystko instalowało. Wczoraj przeinstalowałem sobie Debiana Jessie z podstawową konfiguracją + mate. Doinstalowałem xorg-a i wziąłem się za nvidię. Niby wszystko się poprawnie instaluje, ale nie działa sterownik nvidii.
Kod: Zaznacz cały
ramone@easynote:~$ uname -r
3.10-3-amd64Kod: Zaznacz cały
ramone@easynote:~$ lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 540M] (rev ff)
02:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57785 Gigabit Ethernet PCIe (rev 10)
02:00.1 SD Host controller: Broadcom Corporation NetXtreme BCM57765 Memory Card Reader (rev 10)
02:00.2 System peripheral: Broadcom Corporation Device 16be (rev 10)
02:00.3 System peripheral: Broadcom Corporation Device 16bf (rev 10)
03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8192SE Wireless LAN Controller (rev 10)
05:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)
Kod: Zaznacz cały
[ 98.756]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 98.756] X Protocol Version 11, Revision 0
[ 98.756] Build Operating System: Linux 3.2.0-4-amd64 x86_64 Debian
[ 98.756] Current Operating System: Linux easynote 3.10-3-amd64 #1 SMP Debian 3.10.11-1 (2013-09-10) x86_64
[ 98.756] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.10-3-amd64 root=UUID=87bda92f-090b-44e7-908d-e0241e84ebb4 ro quiet
[ 98.756] Build Date: 12 September 2013 10:21:09AM
[ 98.756] xorg-server 2:1.12.4-6.2+b3 (amd64 Build Daemon (binet) <buildd-binet@buildd.debian.org>)
[ 98.756] Current version of pixman: 0.30.2
[ 98.756] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 98.756] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 98.757] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Oct 2 22:06:28 2013
[ 98.757] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 98.757] (==) No Layout section. Using the first Screen section.
[ 98.757] (==) No screen section available. Using defaults.
[ 98.757] (**) |-->Screen "Default Screen Section" (0)
[ 98.757] (**) | |-->Monitor "<default monitor>"
[ 98.758] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 98.758] (==) Automatically adding devices
[ 98.758] (==) Automatically enabling devices
[ 98.758] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 98.758] Entry deleted from font path.
[ 98.758] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 98.758] Entry deleted from font path.
[ 98.758] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 98.758] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 98.758] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 98.758] (II) Loader magic: 0x7fb272ab9b20
[ 98.758] (II) Module ABI versions:
[ 98.758] X.Org ANSI C Emulation: 0.4
[ 98.758] X.Org Video Driver: 12.1
[ 98.758] X.Org XInput driver : 16.0
[ 98.758] X.Org Server Extension : 6.0
[ 98.759] (--) PCI:*(0:0:2:0) 8086:0116:1025:0511 rev 9, Mem @ 0xd1400000/4194304, 0xc0000000/268435456, I/O @ 0x00004000/64
[ 98.760] (II) Open ACPI successful (/var/run/acpid.socket)
[ 98.760] (II) LoadModule: "extmod"
[ 98.760] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 98.761] (II) Module extmod: vendor="X.Org Foundation"
[ 98.761] compiled for 1.12.4, module version = 1.0.0
[ 98.761] Module class: X.Org Server Extension
[ 98.761] ABI class: X.Org Server Extension, version 6.0
[ 98.761] (II) Loading extension SELinux
[ 98.761] (II) Loading extension MIT-SCREEN-SAVER
[ 98.761] (II) Loading extension XFree86-VidModeExtension
[ 98.761] (II) Loading extension XFree86-DGA
[ 98.761] (II) Loading extension DPMS
[ 98.761] (II) Loading extension XVideo
[ 98.761] (II) Loading extension XVideo-MotionCompensation
[ 98.761] (II) Loading extension X-Resource
[ 98.761] (II) LoadModule: "dbe"
[ 98.761] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 98.761] (II) Module dbe: vendor="X.Org Foundation"
[ 98.761] compiled for 1.12.4, module version = 1.0.0
[ 98.761] Module class: X.Org Server Extension
[ 98.761] ABI class: X.Org Server Extension, version 6.0
[ 98.761] (II) Loading extension DOUBLE-BUFFER
[ 98.761] (II) LoadModule: "glx"
[ 98.762] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 98.762] (II) Module glx: vendor="X.Org Foundation"
[ 98.762] compiled for 1.12.4, module version = 1.0.0
[ 98.762] ABI class: X.Org Server Extension, version 6.0
[ 98.762] (==) AIGLX enabled
[ 98.762] (II) Loading extension GLX
[ 98.762] (II) LoadModule: "record"
[ 98.762] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 98.762] (II) Module record: vendor="X.Org Foundation"
[ 98.762] compiled for 1.12.4, module version = 1.13.0
[ 98.762] Module class: X.Org Server Extension
[ 98.762] ABI class: X.Org Server Extension, version 6.0
[ 98.763] (II) Loading extension RECORD
[ 98.763] (II) LoadModule: "dri"
[ 98.763] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 98.763] (II) Module dri: vendor="X.Org Foundation"
[ 98.763] compiled for 1.12.4, module version = 1.0.0
[ 98.763] ABI class: X.Org Server Extension, version 6.0
[ 98.763] (II) Loading extension XFree86-DRI
[ 98.763] (II) LoadModule: "dri2"
[ 98.763] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 98.763] (II) Module dri2: vendor="X.Org Foundation"
[ 98.763] compiled for 1.12.4, module version = 1.2.0
[ 98.763] ABI class: X.Org Server Extension, version 6.0
[ 98.764] (II) Loading extension DRI2
[ 98.764] (==) Matched intel as autoconfigured driver 0
[ 98.764] (==) Matched vesa as autoconfigured driver 1
[ 98.764] (==) Matched fbdev as autoconfigured driver 2
[ 98.764] (==) Assigned the driver to the xf86ConfigLayout
[ 98.764] (II) LoadModule: "intel"
[ 98.764] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 98.764] (II) Module intel: vendor="X.Org Foundation"
[ 98.764] compiled for 1.12.4, module version = 2.21.15
[ 98.764] Module class: X.Org Video Driver
[ 98.764] ABI class: X.Org Video Driver, version 12.1
[ 98.764] (II) LoadModule: "vesa"
[ 98.765] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 98.765] (II) Module vesa: vendor="X.Org Foundation"
[ 98.765] compiled for 1.12.4, module version = 2.3.3
[ 98.765] Module class: X.Org Video Driver
[ 98.765] ABI class: X.Org Video Driver, version 12.1
[ 98.765] (II) LoadModule: "fbdev"
[ 98.765] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 98.765] (II) Module fbdev: vendor="X.Org Foundation"
[ 98.765] compiled for 1.12.4, module version = 0.4.3
[ 98.765] Module class: X.Org Video Driver
[ 98.766] ABI class: X.Org Video Driver, version 12.1
[ 98.766] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 98.766] (II) VESA: driver for VESA chipsets: vesa
[ 98.766] (II) FBDEV: driver for framebuffer: fbdev
[ 98.766] (++) using VT number 7
[ 98.767] drmOpenDevice: node name is /dev/dri/card0
[ 98.767] drmOpenDevice: open result is 8, (OK)
[ 98.767] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 98.767] drmOpenDevice: node name is /dev/dri/card0
[ 98.767] drmOpenDevice: open result is 8, (OK)
[ 98.767] drmOpenByBusid: drmOpenMinor returns 8
[ 98.767] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 98.767] (WW) Falling back to old probe method for vesa
[ 98.767] (WW) Falling back to old probe method for fbdev
[ 98.767] (II) Loading sub module "fbdevhw"
[ 98.767] (II) LoadModule: "fbdevhw"
[ 98.767] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 98.767] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 98.767] compiled for 1.12.4, module version = 0.0.2
[ 98.767] ABI class: X.Org Video Driver, version 12.1
[ 98.768] drmOpenDevice: node name is /dev/dri/card0
[ 98.768] drmOpenDevice: open result is 9, (OK)
[ 98.768] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 98.768] drmOpenDevice: node name is /dev/dri/card0
[ 98.768] drmOpenDevice: open result is 9, (OK)
[ 98.768] drmOpenByBusid: drmOpenMinor returns 9
[ 98.768] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 98.768] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 98.768] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 98.768] (==) intel(0): RGB weight 888
[ 98.768] (==) intel(0): Default visual is TrueColor
[ 98.768] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000
[ 98.768] (**) intel(0): Relaxed fencing enabled
[ 98.768] (**) intel(0): Wait on SwapBuffers? enabled
[ 98.768] (**) intel(0): Triple buffering? enabled
[ 98.768] (**) intel(0): Framebuffer tiled
[ 98.768] (**) intel(0): Pixmaps tiled
[ 98.768] (**) intel(0): 3D buffers tiled
[ 98.768] (**) intel(0): SwapBuffers wait enabled
[ 98.768] (==) intel(0): video overlay key set to 0x101fe
[ 98.768] (II) intel(0): Output LVDS1 has no monitor section
[ 98.868] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 98.869] (II) intel(0): Output VGA1 has no monitor section
[ 98.870] (II) intel(0): Output HDMI1 has no monitor section
[ 98.870] (II) intel(0): Output DP1 has no monitor section
[ 98.870] (II) intel(0): EDID for output LVDS1
[ 98.870] (II) intel(0): Manufacturer: AUO Model: 26ec Serial#: 0
[ 98.870] (II) intel(0): Year: 2009 Week: 1
[ 98.870] (II) intel(0): EDID Version: 1.3
[ 98.870] (II) intel(0): Digital Display Input
[ 98.870] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 98.870] (II) intel(0): Gamma: 2.20
[ 98.870] (II) intel(0): No DPMS capabilities specified
[ 98.870] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 98.870] (II) intel(0): First detailed timing is preferred mode
[ 98.870] (II) intel(0): redX: 0.577 redY: 0.333 greenX: 0.333 greenY: 0.554
[ 98.870] (II) intel(0): blueX: 0.161 blueY: 0.144 whiteX: 0.313 whiteY: 0.329
[ 98.870] (II) intel(0): Manufacturer's mask: 0
[ 98.870] (II) intel(0): Supported detailed timing:
[ 98.870] (II) intel(0): clock: 71.8 MHz Image Size: 344 x 193 mm
[ 98.870] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0
[ 98.870] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 784 v_border: 0
[ 98.870] (II) intel(0): Unknown vendor-specific block f
[ 98.870] (II) intel(0): AUO
[ 98.870] (II) intel(0): B156XW02 V6
[ 98.870] (II) intel(0): EDID (in hex):
[ 98.870] (II) intel(0): 00ffffffffffff0006afec2600000000
[ 98.870] (II) intel(0): 01130103802213780ad7759355558d29
[ 98.870] (II) intel(0): 24505400000001010101010101010101
[ 98.870] (II) intel(0): 0101010101010c1c56a0500010303020
[ 98.871] (II) intel(0): 360058c1100000180000000f00000000
[ 98.871] (II) intel(0): 00000000000000000020000000fe0041
[ 98.871] (II) intel(0): 554f0a202020202020202020000000fe
[ 98.871] (II) intel(0): 004231353658573032205636200a0065
[ 98.871] (II) intel(0): EDID vendor "AUO", prod id 9964
[ 98.871] (II) intel(0): Printing DDC gathered Modelines:
[ 98.871] (II) intel(0): Modeline "1366x768"x0.0 71.80 1366 1414 1446 1526 768 771 777 784 -hsync -vsync (47.1 kHz eP)
[ 98.871] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 98.871] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 98.871] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 98.871] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 98.871] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 98.871] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 98.871] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 98.871] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 98.871] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 98.871] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 98.871] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 98.871] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 98.871] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 98.871] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 98.871] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 98.871] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 98.871] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 98.871] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 98.871] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 98.871] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 98.871] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 98.871] (II) intel(0): Printing probed modes for output LVDS1
[ 98.871] (II) intel(0): Modeline "1366x768"x60.0 71.80 1366 1414 1446 1526 768 771 777 784 -hsync -vsync (47.1 kHz eP)
[ 98.871] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d)
[ 98.871] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d)
[ 98.871] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 98.871] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 98.871] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 98.872] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 98.873] (II) intel(0): EDID for output VGA1
[ 98.873] (II) intel(0): EDID for output HDMI1
[ 98.873] (II) intel(0): EDID for output DP1
[ 98.873] (II) intel(0): Output LVDS1 connected
[ 98.873] (II) intel(0): Output VGA1 disconnected
[ 98.873] (II) intel(0): Output HDMI1 disconnected
[ 98.873] (II) intel(0): Output DP1 disconnected
[ 98.873] (II) intel(0): Using exact sizes for initial modes
[ 98.874] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 98.874] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 98.874] (II) intel(0): Kernel page flipping support detected, enabling
[ 98.874] (**) intel(0): Display dimensions: (340, 190) mm
[ 98.874] (**) intel(0): DPI set to (102, 102)
[ 98.874] (II) Loading sub module "fb"
[ 98.874] (II) LoadModule: "fb"
[ 98.874] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 98.874] (II) Module fb: vendor="X.Org Foundation"
[ 98.874] compiled for 1.12.4, module version = 1.0.0
[ 98.874] ABI class: X.Org ANSI C Emulation, version 0.4
[ 98.874] (II) Loading sub module "dri2"
[ 98.874] (II) LoadModule: "dri2"
[ 98.874] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 98.874] (II) Module dri2: vendor="X.Org Foundation"
[ 98.874] compiled for 1.12.4, module version = 1.2.0
[ 98.874] ABI class: X.Org Server Extension, version 6.0
[ 98.875] (II) UnloadModule: "vesa"
[ 98.875] (II) Unloading vesa
[ 98.875] (II) UnloadModule: "fbdev"
[ 98.875] (II) Unloading fbdev
[ 98.875] (II) UnloadSubModule: "fbdevhw"
[ 98.875] (II) Unloading fbdevhw
[ 98.875] (==) Depth 24 pixmap format is 32 bpp
[ 98.875] (II) intel(0): [DRI2] Setup complete
[ 98.875] (II) intel(0): [DRI2] DRI driver: i965
[ 98.875] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 98.877] (II) UXA(0): Driver registered support for the following operations:
[ 98.877] (II) solid
[ 98.877] (II) copy
[ 98.877] (II) composite (RENDER acceleration)
[ 98.877] (II) put_image
[ 98.877] (II) get_image
[ 98.877] (==) intel(0): Backing store disabled
[ 98.877] (==) intel(0): Silken mouse enabled
[ 98.877] (II) intel(0): Initializing HW Cursor
[ 98.877] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 98.878] (==) intel(0): DPMS enabled
[ 98.878] (==) intel(0): Intel XvMC decoder enabled
[ 98.878] (II) intel(0): Set up textured video
[ 98.879] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 98.879] (II) intel(0): direct rendering: DRI2 Enabled
[ 98.879] (==) intel(0): hotplug detection: "enabled"
[ 98.904] (--) RandR disabled
[ 98.904] (II) Initializing built-in extension Generic Event Extension
[ 98.904] (II) Initializing built-in extension SHAPE
[ 98.904] (II) Initializing built-in extension MIT-SHM
[ 98.904] (II) Initializing built-in extension XInputExtension
[ 98.904] (II) Initializing built-in extension XTEST
[ 98.904] (II) Initializing built-in extension BIG-REQUESTS
[ 98.904] (II) Initializing built-in extension SYNC
[ 98.904] (II) Initializing built-in extension XKEYBOARD
[ 98.904] (II) Initializing built-in extension XC-MISC
[ 98.904] (II) Initializing built-in extension SECURITY
[ 98.904] (II) Initializing built-in extension XINERAMA
[ 98.904] (II) Initializing built-in extension XFIXES
[ 98.904] (II) Initializing built-in extension RENDER
[ 98.904] (II) Initializing built-in extension RANDR
[ 98.904] (II) Initializing built-in extension COMPOSITE
[ 98.904] (II) Initializing built-in extension DAMAGE
[ 98.904] (II) SELinux: Disabled on system
[ 98.924] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 98.924] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 98.924] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 98.925] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 98.925] (II) AIGLX: Loaded and initialized i965
[ 98.925] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 98.925] (II) intel(0): Setting screen physical size to 361 x 203
[ 98.997] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 98.997] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 98.997] (II) LoadModule: "evdev"
[ 98.997] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 98.998] (II) Module evdev: vendor="X.Org Foundation"
[ 98.998] compiled for 1.12.4, module version = 2.8.1
[ 98.998] Module class: X.Org XInput Driver
[ 98.998] ABI class: X.Org XInput driver, version 16.0
[ 98.998] (II) Using input driver 'evdev' for 'Power Button'
[ 98.998] (**) Power Button: always reports core events
[ 98.998] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 98.998] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 98.998] (--) evdev: Power Button: Found keys
[ 98.998] (II) evdev: Power Button: Configuring as keyboard
[ 98.998] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[ 98.998] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 98.998] (**) Option "xkb_rules" "evdev"
[ 98.998] (**) Option "xkb_model" "pc105"
[ 98.998] (**) Option "xkb_layout" "pl"
[ 99.042] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
[ 99.042] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 99.042] (II) Using input driver 'evdev' for 'Video Bus'
[ 99.042] (**) Video Bus: always reports core events
[ 99.042] (**) evdev: Video Bus: Device: "/dev/input/event14"
[ 99.042] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 99.042] (--) evdev: Video Bus: Found keys
[ 99.042] (II) evdev: Video Bus: Configuring as keyboard
[ 99.042] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input14/event14"
[ 99.042] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 99.042] (**) Option "xkb_rules" "evdev"
[ 99.042] (**) Option "xkb_model" "pc105"
[ 99.042] (**) Option "xkb_layout" "pl"
[ 99.043] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 99.043] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 99.043] (II) Using input driver 'evdev' for 'Power Button'
[ 99.043] (**) Power Button: always reports core events
[ 99.043] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 99.043] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 99.043] (--) evdev: Power Button: Found keys
[ 99.043] (II) evdev: Power Button: Configuring as keyboard
[ 99.043] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input2/event2"
[ 99.043] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 99.043] (**) Option "xkb_rules" "evdev"
[ 99.043] (**) Option "xkb_model" "pc105"
[ 99.043] (**) Option "xkb_layout" "pl"
[ 99.044] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 99.044] (II) No input driver specified, ignoring this device.
[ 99.044] (II) This device may have been added with another device file.
[ 99.045] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 99.045] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 99.045] (II) Using input driver 'evdev' for 'Sleep Button'
[ 99.045] (**) Sleep Button: always reports core events
[ 99.045] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[ 99.045] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 99.045] (--) evdev: Sleep Button: Found keys
[ 99.045] (II) evdev: Sleep Button: Configuring as keyboard
[ 99.045] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0E:00/input/input4/event4"
[ 99.045] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 99.045] (**) Option "xkb_rules" "evdev"
[ 99.045] (**) Option "xkb_model" "pc105"
[ 99.045] (**) Option "xkb_layout" "pl"
[ 99.046] (II) config/udev: Adding input device Video Bus (/dev/input/event15)
[ 99.046] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 99.046] (II) Using input driver 'evdev' for 'Video Bus'
[ 99.046] (**) Video Bus: always reports core events
[ 99.046] (**) evdev: Video Bus: Device: "/dev/input/event15"
[ 99.046] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 99.046] (--) evdev: Video Bus: Found keys
[ 99.046] (II) evdev: Video Bus: Configuring as keyboard
[ 99.046] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:35/LNXVIDEO:01/input/input15/event15"
[ 99.046] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 10)
[ 99.046] (**) Option "xkb_rules" "evdev"
[ 99.046] (**) Option "xkb_model" "pc105"
[ 99.046] (**) Option "xkb_layout" "pl"
[ 99.047] (II) config/udev: Adding input device 1.3M HD WebCam (/dev/input/event13)
[ 99.047] (**) 1.3M HD WebCam: Applying InputClass "evdev keyboard catchall"
[ 99.048] (II) Using input driver 'evdev' for '1.3M HD WebCam'
[ 99.048] (**) 1.3M HD WebCam: always reports core events
[ 99.048] (**) evdev: 1.3M HD WebCam: Device: "/dev/input/event13"
[ 99.048] (--) evdev: 1.3M HD WebCam: Vendor 0x4f2 Product 0xb23d
[ 99.048] (--) evdev: 1.3M HD WebCam: Found keys
[ 99.048] (II) evdev: 1.3M HD WebCam: Configuring as keyboard
[ 99.048] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input13/event13"
[ 99.048] (II) XINPUT: Adding extended input device "1.3M HD WebCam" (type: KEYBOARD, id 11)
[ 99.048] (**) Option "xkb_rules" "evdev"
[ 99.048] (**) Option "xkb_model" "pc105"
[ 99.048] (**) Option "xkb_layout" "pl"
[ 99.049] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[ 99.049] (II) No input driver specified, ignoring this device.
[ 99.049] (II) This device may have been added with another device file.
[ 99.049] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[ 99.049] (II) No input driver specified, ignoring this device.
[ 99.049] (II) This device may have been added with another device file.
[ 99.050] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[ 99.050] (II) No input driver specified, ignoring this device.
[ 99.050] (II) This device may have been added with another device file.
[ 99.050] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
[ 99.050] (II) No input driver specified, ignoring this device.
[ 99.050] (II) This device may have been added with another device file.
[ 99.051] (II) config/udev: Adding input device A4Tech RF USB Mouse (/dev/input/event1)
[ 99.051] (**) A4Tech RF USB Mouse: Applying InputClass "evdev pointer catchall"
[ 99.051] (II) Using input driver 'evdev' for 'A4Tech RF USB Mouse'
[ 99.051] (**) A4Tech RF USB Mouse: always reports core events
[ 99.051] (**) evdev: A4Tech RF USB Mouse: Device: "/dev/input/event1"
[ 99.051] (--) evdev: A4Tech RF USB Mouse: Vendor 0x9da Product 0x1e
[ 99.051] (--) evdev: A4Tech RF USB Mouse: Found 12 mouse buttons
[ 99.051] (--) evdev: A4Tech RF USB Mouse: Found scroll wheel(s)
[ 99.051] (--) evdev: A4Tech RF USB Mouse: Found relative axes
[ 99.051] (--) evdev: A4Tech RF USB Mouse: Found x and y relative axes
[ 99.051] (II) evdev: A4Tech RF USB Mouse: Configuring as mouse
[ 99.051] (II) evdev: A4Tech RF USB Mouse: Adding scrollwheel support
[ 99.051] (**) evdev: A4Tech RF USB Mouse: YAxisMapping: buttons 4 and 5
[ 99.051] (**) evdev: A4Tech RF USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 99.051] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input1/event1"
[ 99.051] (II) XINPUT: Adding extended input device "A4Tech RF USB Mouse" (type: MOUSE, id 12)
[ 99.051] (II) evdev: A4Tech RF USB Mouse: initialized for relative axes.
[ 99.052] (**) A4Tech RF USB Mouse: (accel) keeping acceleration scheme 1
[ 99.052] (**) A4Tech RF USB Mouse: (accel) acceleration profile 0
[ 99.052] (**) A4Tech RF USB Mouse: (accel) acceleration factor: 2.000
[ 99.052] (**) A4Tech RF USB Mouse: (accel) acceleration threshold: 4
[ 99.052] (II) config/udev: Adding input device A4Tech RF USB Mouse (/dev/input/mouse0)
[ 99.052] (II) No input driver specified, ignoring this device.
[ 99.052] (II) This device may have been added with another device file.
[ 99.053] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 99.053] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 99.053] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 99.053] (**) AT Translated Set 2 keyboard: always reports core events
[ 99.053] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 99.053] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 99.053] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 99.053] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 99.053] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 99.053] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 99.053] (**) Option "xkb_rules" "evdev"
[ 99.053] (**) Option "xkb_model" "pc105"
[ 99.053] (**) Option "xkb_layout" "pl"
[ 99.054] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event16)
[ 99.054] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 99.054] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 99.054] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 99.054] (II) LoadModule: "synaptics"
[ 99.055] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 99.055] (II) Module synaptics: vendor="X.Org Foundation"
[ 99.055] compiled for 1.12.4, module version = 1.7.1
[ 99.055] Module class: X.Org XInput Driver
[ 99.055] ABI class: X.Org XInput driver, version 16.0
[ 99.055] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 99.055] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 99.055] (**) Option "Device" "/dev/input/event16"
[ 99.160] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 99.160] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5774 (res 56)
[ 99.160] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5022 (res 105)
[ 99.160] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 99.160] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 99.160] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 99.160] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 99.160] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 99.160] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 99.224] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input16/event16"
[ 99.224] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[ 99.224] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 99.224] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 99.224] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.036
[ 99.224] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 99.224] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 99.224] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 99.224] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 99.225] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 99.225] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 99.225] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 99.226] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 99.226] (II) No input driver specified, ignoring this device.
[ 99.226] (II) This device may have been added with another device file.
[ 99.226] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event7)
[ 99.226] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 99.226] (II) Using input driver 'evdev' for 'Acer WMI hotkeys'
[ 99.226] (**) Acer WMI hotkeys: always reports core events
[ 99.226] (**) evdev: Acer WMI hotkeys: Device: "/dev/input/event7"
[ 99.227] (--) evdev: Acer WMI hotkeys: Vendor 0 Product 0
[ 99.227] (--) evdev: Acer WMI hotkeys: Found keys
[ 99.227] (II) evdev: Acer WMI hotkeys: Configuring as keyboard
[ 99.227] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7"
[ 99.227] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 15)
[ 99.227] (**) Option "xkb_rules" "evdev"
[ 99.227] (**) Option "xkb_model" "pc105"
[ 99.227] (**) Option "xkb_layout" "pl"
[ 99.228] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event8)
[ 99.228] (II) No input driver specified, ignoring this device.
[ 99.228] (II) This device may have been added with another device file.
[ 99.228] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0)
[ 99.228] (II) No input driver specified, ignoring this device.
[ 99.228] (II) This device may have been added with another device file.
[ 104.318] (II) intel(0): EDID vendor "AUO", prod id 9964
[ 104.318] (II) intel(0): Printing DDC gathered Modelines:
[ 104.318] (II) intel(0): Modeline "1366x768"x0.0 71.80 1366 1414 1446 1526 768 771 777 784 -hsync -vsync (47.1 kHz eP)
[ 104.321] (II) intel(0): EDID vendor "AUO", prod id 9964
[ 104.321] (II) intel(0): Printing DDC gathered Modelines:
[ 104.321] (II) intel(0): Modeline "1366x768"x0.0 71.80 1366 1414 1446 1526 768 771 777 784 -hsync -vsync (47.1 kHz eP)
[ 104.324] (II) intel(0): EDID vendor "AUO", prod id 9964
[ 104.324] (II) intel(0): Printing DDC gathered Modelines:
[ 104.324] (II) intel(0): Modeline "1366x768"x0.0 71.80 1366 1414 1446 1526 768 771 777 784 -hsync -vsync (47.1 kHz eP)
[ 104.326] (II) intel(0): EDID vendor "AUO", prod id 9964
[ 104.326] (II) intel(0): Printing DDC gathered Modelines:
[ 104.326] (II) intel(0): Modeline "1366x768"x0.0 71.80 1366 1414 1446 1526 768 771 777 784 -hsync -vsync (47.1 kHz eP)
[ 104.507] (II) intel(0): EDID vendor "AUO", prod id 9964
[ 104.507] (II) intel(0): Printing DDC gathered Modelines:
[ 104.507] (II) intel(0): Modeline "1366x768"x0.0 71.80 1366 1414 1446 1526 768 771 777 784 -hsync -vsync (47.1 kHz eP)Kod: Zaznacz cały
# Configuration file for Bumblebee. Values should **not** be put between quotes
## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false
# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
# bbswitch - new in BB 3, recommended if available
# switcheroo - vga_switcheroo method, use at your own risk
# none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods
## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-current
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia
## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau
Czy coś mi umknęło przy instalacji ?
