Oto informacje:
Kod: Zaznacz cały
mozart@debianisko:~$ uname -a
Linux debianisko 3.2.0-4-amd64 #1 SMP Debian 3.2.46-1 x86_64 GNU/Linux
Kod: Zaznacz cały
mozart@debianisko:~$ dpkg --print-architecture
amd64
Kod: Zaznacz cały
mozart@debianisko:~$ lspci -k
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02)
Subsystem: Giga-byte Technology Device 5000
00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02)
Kernel driver in use: pcieport
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
Subsystem: Giga-byte Technology Device 5004
Kernel driver in use: uhci_hcd
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
Subsystem: Giga-byte Technology Device 5004
Kernel driver in use: uhci_hcd
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
Subsystem: Giga-byte Technology Device 5004
Kernel driver in use: uhci_hcd
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
Subsystem: Giga-byte Technology Device 5006
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
Subsystem: Giga-byte Technology Device a002
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
Kernel driver in use: pcieport
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02)
Kernel driver in use: pcieport
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02)
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
Subsystem: Giga-byte Technology Device 5004
Kernel driver in use: uhci_hcd
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
Subsystem: Giga-byte Technology Device 5004
Kernel driver in use: uhci_hcd
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
Subsystem: Giga-byte Technology Device 5004
Kernel driver in use: uhci_hcd
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
Subsystem: Giga-byte Technology Device 5006
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IB (ICH9) LPC Interface Controller (rev 02)
Subsystem: Giga-byte Technology Device 5001
00:1f.2 IDE interface: Intel Corporation 82801IB (ICH9) 2 port SATA Controller [IDE mode] (rev 02)
Subsystem: Giga-byte Technology Device b002
Kernel driver in use: ata_piix
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
Subsystem: Giga-byte Technology Device 5001
Kernel driver in use: i801_smbus
00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA Controller [IDE mode] (rev 02)
Subsystem: Giga-byte Technology Device b002
Kernel driver in use: ata_piix
01:00.0 VGA compatible controller: NVIDIA Corporation GF114 [GeForce GTX 560 SE] (rev a1)
Subsystem: CardExpert Technology Device 0401
Kernel driver in use: nvidia
01:00.1 Audio device: NVIDIA Corporation GF114 HDMI Audio Controller (rev a1)
Subsystem: CardExpert Technology Device 0401
Kernel driver in use: snd_hda_intel
03:00.0 IDE interface: JMicron Technology Corp. JMB368 IDE controller
Subsystem: Giga-byte Technology Device b000
Kernel driver in use: pata_jmicron
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
Subsystem: Giga-byte Technology GA-EP45-DS5/GA-EG45M-DS2H Motherboard
Kernel driver in use: r8169
05:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
Subsystem: Giga-byte Technology GA-EP45-DS5/GA-EG45M-DS2H Motherboard
Kernel driver in use: firewire_ohci
Kod: Zaznacz cały
mozart@debianisko:~$ lspci -n
00:00.0 0600: 8086:29c0 (rev 02)
00:01.0 0604: 8086:29c1 (rev 02)
00:1a.0 0c03: 8086:2937 (rev 02)
00:1a.1 0c03: 8086:2938 (rev 02)
00:1a.2 0c03: 8086:2939 (rev 02)
00:1a.7 0c03: 8086:293c (rev 02)
00:1b.0 0403: 8086:293e (rev 02)
00:1c.0 0604: 8086:2940 (rev 02)
00:1c.4 0604: 8086:2948 (rev 02)
00:1c.5 0604: 8086:294a (rev 02)
00:1d.0 0c03: 8086:2934 (rev 02)
00:1d.1 0c03: 8086:2935 (rev 02)
00:1d.2 0c03: 8086:2936 (rev 02)
00:1d.7 0c03: 8086:293a (rev 02)
00:1e.0 0604: 8086:244e (rev 92)
00:1f.0 0601: 8086:2918 (rev 02)
00:1f.2 0101: 8086:2921 (rev 02)
00:1f.3 0c05: 8086:2930 (rev 02)
00:1f.5 0101: 8086:2926 (rev 02)
01:00.0 0300: 10de:1208 (rev a1)
01:00.1 0403: 10de:0e0c (rev a1)
03:00.0 0101: 197b:2368
04:00.0 0200: 10ec:8168 (rev 01)
05:07.0 0c00: 104c:8024
Tutaj zawartość pliku /var/log/Xorg.0.log:
Kod: Zaznacz cały
[ 13.645]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 13.645] X Protocol Version 11, Revision 0
[ 13.645] Build Operating System: Linux 3.2.0-4-amd64 x86_64 Debian
[ 13.645] Current Operating System: Linux debianisko 3.2.0-4-amd64 #1 SMP Debian 3.2.46-1 x86_64
[ 13.645] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=86edba85-d771-45c4-a542-2b0ccd9e8799 ro quiet
[ 13.645] Build Date: 17 April 2013 10:22:47AM
[ 13.645] xorg-server 2:1.12.4-6 (Julien Cristau <jcristau@debian.org>)
[ 13.645] Current version of pixman: 0.26.0
[ 13.645] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 13.645] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 13.645] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 1 11:13:04 2013
[ 13.682] (==) Using config file: "/etc/X11/xorg.conf"
[ 13.682] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 13.760] (==) ServerLayout "Layout0"
[ 13.760] (**) |-->Screen "Screen0" (0)
[ 13.760] (**) | |-->Monitor "Monitor0"
[ 13.760] (**) | |-->Device "Device0"
[ 13.760] (**) |-->Input Device "Keyboard0"
[ 13.760] (**) |-->Input Device "Mouse0"
[ 13.760] (==) Automatically adding devices
[ 13.760] (==) Automatically enabling devices
[ 13.823] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 13.823] Entry deleted from font path.
[ 13.823] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 13.823] Entry deleted from font path.
[ 13.823] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 13.823] Entry deleted from font path.
[ 13.823] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[ 13.823] Entry deleted from font path.
[ 13.823] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 13.823] Entry deleted from font path.
[ 13.823] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 13.823] Entry deleted from font path.
[ 13.823] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 13.823] Entry deleted from font path.
[ 13.823] (==) FontPath set to:
/usr/share/fonts/X11/misc,
built-ins
[ 13.823] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 13.823] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 13.823] (WW) Disabling Keyboard0
[ 13.823] (WW) Disabling Mouse0
[ 13.823] (II) Loader magic: 0x7f5559d65ae0
[ 13.823] (II) Module ABI versions:
[ 13.823] X.Org ANSI C Emulation: 0.4
[ 13.823] X.Org Video Driver: 12.1
[ 13.823] X.Org XInput driver : 16.0
[ 13.823] X.Org Server Extension : 6.0
[ 13.824] (--) PCI:*(0:1:0:0) 10de:1208:10b0:0401 rev 161, Mem @ 0xf0000000/33554432, 0xe0000000/134217728, 0xe8000000/67108864, I/O @ 0x0000a000/128, BIOS @ 0x????????/524288
[ 13.824] (II) Open ACPI successful (/var/run/acpid.socket)
[ 13.825] (II) LoadModule: "extmod"
[ 13.882] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 13.901] (II) Module extmod: vendor="X.Org Foundation"
[ 13.901] compiled for 1.12.4, module version = 1.0.0
[ 13.901] Module class: X.Org Server Extension
[ 13.901] ABI class: X.Org Server Extension, version 6.0
[ 13.901] (II) Loading extension SELinux
[ 13.901] (II) Loading extension MIT-SCREEN-SAVER
[ 13.901] (II) Loading extension XFree86-VidModeExtension
[ 13.901] (II) Loading extension XFree86-DGA
[ 13.901] (II) Loading extension DPMS
[ 13.901] (II) Loading extension XVideo
[ 13.901] (II) Loading extension XVideo-MotionCompensation
[ 13.901] (II) Loading extension X-Resource
[ 13.901] (II) LoadModule: "dbe"
[ 13.901] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 13.901] (II) Module dbe: vendor="X.Org Foundation"
[ 13.901] compiled for 1.12.4, module version = 1.0.0
[ 13.901] Module class: X.Org Server Extension
[ 13.901] ABI class: X.Org Server Extension, version 6.0
[ 13.901] (II) Loading extension DOUBLE-BUFFER
[ 13.901] (II) LoadModule: "glx"
[ 13.902] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 15.009] (II) Module glx: vendor="NVIDIA Corporation"
[ 15.009] compiled for 4.0.2, module version = 1.0.0
[ 15.009] Module class: X.Org Server Extension
[ 15.009] (II) NVIDIA GLX Module 304.88 Wed Mar 27 14:46:57 PDT 2013
[ 15.009] (II) Loading extension GLX
[ 15.009] (II) LoadModule: "record"
[ 15.009] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 15.021] (II) Module record: vendor="X.Org Foundation"
[ 15.021] compiled for 1.12.4, module version = 1.13.0
[ 15.021] Module class: X.Org Server Extension
[ 15.021] ABI class: X.Org Server Extension, version 6.0
[ 15.021] (II) Loading extension RECORD
[ 15.021] (II) LoadModule: "dri"
[ 15.021] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 15.029] (II) Module dri: vendor="X.Org Foundation"
[ 15.029] compiled for 1.12.4, module version = 1.0.0
[ 15.029] ABI class: X.Org Server Extension, version 6.0
[ 15.029] (II) Loading extension XFree86-DRI
[ 15.029] (II) LoadModule: "dri2"
[ 15.029] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 15.030] (II) Module dri2: vendor="X.Org Foundation"
[ 15.030] compiled for 1.12.4, module version = 1.2.0
[ 15.030] ABI class: X.Org Server Extension, version 6.0
[ 15.030] (II) Loading extension DRI2
[ 15.030] (II) LoadModule: "nvidia"
[ 15.030] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 15.091] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 15.091] compiled for 4.0.2, module version = 1.0.0
[ 15.091] Module class: X.Org Video Driver
[ 15.109] (II) NVIDIA dlloader X Driver 304.88 Wed Mar 27 14:28:14 PDT 2013
[ 15.109] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 15.112] (++) using VT number 7
[ 15.126] (II) Loading sub module "fb"
[ 15.126] (II) LoadModule: "fb"
[ 15.126] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 15.143] (II) Module fb: vendor="X.Org Foundation"
[ 15.143] compiled for 1.12.4, module version = 1.0.0
[ 15.143] ABI class: X.Org ANSI C Emulation, version 0.4
[ 15.143] (II) Loading sub module "wfb"
[ 15.143] (II) LoadModule: "wfb"
[ 15.143] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 15.150] (II) Module wfb: vendor="X.Org Foundation"
[ 15.150] compiled for 1.12.4, module version = 1.0.0
[ 15.150] ABI class: X.Org ANSI C Emulation, version 0.4
[ 15.150] (II) Loading sub module "ramdac"
[ 15.150] (II) LoadModule: "ramdac"
[ 15.150] (II) Module "ramdac" already built-in
[ 15.165] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 15.165] (==) NVIDIA(0): RGB weight 888
[ 15.165] (==) NVIDIA(0): Default visual is TrueColor
[ 15.165] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 15.165] (**) NVIDIA(0): Enabling 2D acceleration
[ 15.832] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[ 15.846] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 560 SE (GF114) at PCI:1:0:0 (GPU-0)
[ 15.846] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 15.846] (--) NVIDIA(0): VideoBIOS: 70.24.45.00.00
[ 15.846] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 15.846] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 15.850] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 560 SE at PCI:1:0:0
[ 15.850] (--) NVIDIA(0): CRT-0
[ 15.850] (--) NVIDIA(0): CRT-1 (connected)
[ 15.850] (--) NVIDIA(0): DFP-0
[ 15.850] (--) NVIDIA(0): DFP-1
[ 15.850] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 15.850] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[ 15.850] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[ 15.850] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 15.850] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[ 15.850] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 15.850] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 15.850] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
[ 15.850] (**) NVIDIA(0): all display devices.)
[ 15.851] (==) NVIDIA(0):
[ 15.851] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 15.851] (==) NVIDIA(0): will be used as the requested mode.
[ 15.851] (==) NVIDIA(0):
[ 15.851] (II) NVIDIA(0): Validated MetaModes:
[ 15.851] (II) NVIDIA(0): "CRT-1:nvidia-auto-select"
[ 15.851] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 15.876] (WW) NVIDIA(0): Unable to get display device CRT-1's EDID; cannot compute DPI
[ 15.876] (WW) NVIDIA(0): from CRT-1's EDID.
[ 15.876] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 15.876] (--) Depth 24 pixmap format is 32 bpp
[ 15.876] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 15.876] (II) NVIDIA: access.
[ 15.882] (II) NVIDIA(0): Setting mode "CRT-1:nvidia-auto-select"
[ 15.915] (II) NVIDIA(0): Built-in logo is bigger than the screen.
[ 15.915] (II) Loading extension NV-GLX
[ 16.014] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 16.014] (==) NVIDIA(0): Backing store disabled
[ 16.014] (==) NVIDIA(0): Silken mouse enabled
[ 16.014] (**) NVIDIA(0): DPMS enabled
[ 16.032] (II) Loading extension NV-CONTROL
[ 16.032] (II) Loading extension XINERAMA
[ 16.032] (II) Loading sub module "dri2"
[ 16.032] (II) LoadModule: "dri2"
[ 16.032] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 16.032] (II) Module dri2: vendor="X.Org Foundation"
[ 16.032] compiled for 1.12.4, module version = 1.2.0
[ 16.032] ABI class: X.Org Server Extension, version 6.0
[ 16.032] (II) NVIDIA(0): [DRI2] Setup complete
[ 16.032] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 16.032] (--) RandR disabled
[ 16.032] (II) Initializing built-in extension Generic Event Extension
[ 16.032] (II) Initializing built-in extension SHAPE
[ 16.032] (II) Initializing built-in extension MIT-SHM
[ 16.032] (II) Initializing built-in extension XInputExtension
[ 16.032] (II) Initializing built-in extension XTEST
[ 16.032] (II) Initializing built-in extension BIG-REQUESTS
[ 16.032] (II) Initializing built-in extension SYNC
[ 16.032] (II) Initializing built-in extension XKEYBOARD
[ 16.032] (II) Initializing built-in extension XC-MISC
[ 16.032] (II) Initializing built-in extension SECURITY
[ 16.032] (II) Initializing built-in extension XINERAMA
[ 16.032] (II) Initializing built-in extension XFIXES
[ 16.032] (II) Initializing built-in extension RENDER
[ 16.032] (II) Initializing built-in extension RANDR
[ 16.032] (II) Initializing built-in extension COMPOSITE
[ 16.032] (II) Initializing built-in extension DAMAGE
[ 16.032] (II) SELinux: Disabled on system
[ 16.034] (II) Initializing extension GLX
[ 16.469] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 16.469] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.469] (II) LoadModule: "evdev"
[ 16.469] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 16.485] (II) Module evdev: vendor="X.Org Foundation"
[ 16.485] compiled for 1.12.1, module version = 2.7.0
[ 16.485] Module class: X.Org XInput Driver
[ 16.485] ABI class: X.Org XInput driver, version 16.0
[ 16.485] (II) Using input driver 'evdev' for 'Power Button'
[ 16.485] (**) Power Button: always reports core events
[ 16.485] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 16.485] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 16.485] (--) evdev: Power Button: Found keys
[ 16.485] (II) evdev: Power Button: Configuring as keyboard
[ 16.485] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 16.485] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 16.485] (**) Option "xkb_rules" "evdev"
[ 16.485] (**) Option "xkb_model" "pc105"
[ 16.485] (**) Option "xkb_layout" "pl"
[ 16.503] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 16.503] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.503] (II) Using input driver 'evdev' for 'Power Button'
[ 16.503] (**) Power Button: always reports core events
[ 16.503] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 16.503] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 16.503] (--) evdev: Power Button: Found keys
[ 16.503] (II) evdev: Power Button: Configuring as keyboard
[ 16.503] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3"
[ 16.503] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 16.503] (**) Option "xkb_rules" "evdev"
[ 16.503] (**) Option "xkb_model" "pc105"
[ 16.503] (**) Option "xkb_layout" "pl"
[ 16.504] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event5)
[ 16.504] (II) No input driver specified, ignoring this device.
[ 16.504] (II) This device may have been added with another device file.
[ 16.504] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event6)
[ 16.504] (II) No input driver specified, ignoring this device.
[ 16.504] (II) This device may have been added with another device file.
[ 16.504] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event7)
[ 16.504] (II) No input driver specified, ignoring this device.
[ 16.504] (II) This device may have been added with another device file.
[ 16.505] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event8)
[ 16.505] (II) No input driver specified, ignoring this device.
[ 16.505] (II) This device may have been added with another device file.
[ 16.505] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event1)
[ 16.505] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 16.505] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 16.505] (**) Logitech USB Optical Mouse: always reports core events
[ 16.505] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event1"
[ 16.505] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05b
[ 16.505] (--) evdev: Logitech USB Optical Mouse: Found 12 mouse buttons
[ 16.505] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[ 16.505] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[ 16.505] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[ 16.505] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[ 16.505] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[ 16.505] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 16.505] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 16.505] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input1/event1"
[ 16.505] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 8)
[ 16.505] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[ 16.505] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 16.505] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 16.505] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 16.505] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 16.506] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 16.506] (II) No input driver specified, ignoring this device.
[ 16.506] (II) This device may have been added with another device file.
[ 16.506] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 16.506] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 16.506] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 16.506] (**) AT Translated Set 2 keyboard: always reports core events
[ 16.506] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 16.506] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 16.506] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 16.506] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 16.506] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 16.506] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 16.506] (**) Option "xkb_rules" "evdev"
[ 16.506] (**) Option "xkb_model" "pc105"
[ 16.506] (**) Option "xkb_layout" "pl"
[ 16.506] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 16.506] (II) No input driver specified, ignoring this device.
[ 16.506] (II) This device may have been added with another device file.
[ 16.552] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[ 16.552] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 16.552] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
[ 16.552] (**) NVIDIA(0): all display devices.)
[ 19.471] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[ 19.471] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 19.471] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
[ 19.471] (**) NVIDIA(0): all display devices.)
[ 30.331] (WW) NVIDIA(GPU-0): The EDID read for display device CRT-1 is invalid: the
[ 30.332] (WW) NVIDIA(GPU-0): checksum for EDID version 1 is invalid.
[ 30.332] (--) NVIDIA(GPU-0):
[ 30.332] (--) NVIDIA(GPU-0): Raw EDID bytes:
[ 30.332] (--) NVIDIA(GPU-0):
[ 30.332] (--) NVIDIA(GPU-0): 00 ff ff ff ff ff ff 00 13 2d 56 11 37 31 46 44
[ 30.332] (--) NVIDIA(GPU-0): 23 0a 01 02 68 20 18 7e ea bb b9 a3 52 46 98 24
[ 30.332] (--) NVIDIA(GPU-0): 03 48 4c ff ff 80 31 59 45 59 61 59 81 8f a9 45
[ 30.332] (--) NVIDIA(GPU-0): 01 01 01 01 01 01 ea 24 24 20 60 41 00 28 30 30
[ 30.332] (--) NVIDIA(GPU-0): 60 13 00 32 e6 10 00 00 1e 00 00 00 fd 00 32 a0
[ 30.332] (--) NVIDIA(GPU-0): 87 55 ff 00 0a 20 20 20 20 20 20 00 00 00 fc 00
[ 30.332] (--) NVIDIA(GPU-0): 53 2f 4d 20 37 35 35 35 44 46 0a 20 20 20 00 00
[ 30.332] (--) NVIDIA(GPU-0): 00 ff 00 48 4a 46 4e 39 30 30 32 32 32 0a 10 20
[ 30.332] (--) NVIDIA(GPU-0):
[ 30.332] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 30.332] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 30.332] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 30.332] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 30.332] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 30.332] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 30.332] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 30.332] (--) NVIDIA(GPU-0): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 30.332] (--) NVIDIA(GPU-0):
[ 30.332] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 30.332] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
[ 30.332] (**) NVIDIA(0): all display devices.)
[ 31.616] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[ 31.616] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 31.616] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
[ 31.616] (**) NVIDIA(0): all display devices.)
[ 33.318] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[ 33.318] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 33.318] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
[ 33.318] (**) NVIDIA(0): all display devices.)
Odnośnie sposobu z edycją xorg.conf, oraz nvidia-settings, odpada bo w nvidia-settings największą rozdzielczością jaką posiadam do wyboru to 640x480.