Kod: Zaznacz cały
Bus 002 Device 003: ID 0c45:613e Microdia PC Camera (SN9C120)
Kod: Zaznacz cały
Using V4L2[1] v4l2_next: VIDIOC_DQBUF: EIO (s->pframe 0): Input/output error
[1] v4l2_next: VIDIOC_QBUF: Invalid argument
[1] Video device fatal error - Closing video device
[1] Closing video device /dev/video0
Kod: Zaznacz cały
szlejk@:~$ fswebcam -r 320x240 test.jpeg--- Opening /dev/video0...
Trying source module v4l2...
/dev/video0 opened.
No input was specified, using the first.
--- Capturing frame...
Timed out waiting for frame!
No frames captured.
Kod: Zaznacz cały
lsmod
dmesgKod: Zaznacz cały
szlejk@donga-server:~$ lsmodModule Size Used by
nfsd 194111 13
exportfs 2626 1 nfsd
nfs 207470 0
lockd 49481 2 nfsd,nfs
fscache 24718 1 nfs
nfs_acl 1695 2 nfsd,nfs
auth_rpcgss 25312 2 nfsd,nfs
sunrpc 135007 12 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
ext2 46277 1
vt1211 9756 0
hwmon_vid 1528 1 vt1211
loop 9777 0
firewire_sbp2 9663 0
firewire_core 31275 1 firewire_sbp2
crc_itu_t 1035 1 firewire_core
snd_via82xx 15256 0
gameport 6069 1 snd_via82xx
snd_ac97_codec 79152 1 snd_via82xx
ac97_bus 710 1 snd_ac97_codec
snd_mpu401_uart 4075 1 snd_via82xx
gspca_sonixj 14886 0
snd_pcm 47226 2 snd_via82xx,snd_ac97_codec
gspca_main 15775 1 gspca_sonixj
snd_rawmidi 12513 1 snd_mpu401_uart
snd_timer 12270 1 snd_pcm
snd_seq_device 3673 1 snd_rawmidi
videodev 25661 1 gspca_main
snd_page_alloc 5061 2 snd_via82xx,snd_pcm
snd 34431 7 snd_via82xx,snd_ac97_codec,snd_mpu401_uart,snd_pcm,snd_rawmidi,snd_timer,snd_seq_device
i2c_viapro 4423 0
v4l1_compat 10250 1 videodev
parport_pc 15799 0
shpchp 21200 0
evdev 5609 3
pcspkr 1207 0
serio_raw 2916 0
parport 22554 1 parport_pc
soundcore 3450 1 snd
i2c_core 12795 2 videodev,i2c_viapro
button 3598 0
processor 26343 1
pci_hotplug 18545 1 shpchp
ext3 94536 1
jbd 32449 1 ext3
mbcache 3762 2 ext2,ext3
usb_storage 31041 1
sd_mod 26029 5
crc_t10dif 1012 1 sd_mod
ata_generic 2247 0
fan 2586 0
pata_via 5709 2
uhci_hcd 16073 0
libata 115925 2 ata_generic,pata_via
thermal 9206 0
via_rhine 14651 0
ehci_hcd 28745 0
scsi_mod 105157 4 firewire_sbp2,usb_storage,sd_mod,libata
usbcore 99530 6 gspca_sonixj,gspca_main,usb_storage,uhci_hcd,ehci_hcd
thermal_sys 9378 3 processor,fan,thermal
mii 2714 1 via_rhine
nls_base 4541 1 usbcore
Kod: Zaznacz cały
szlejk@donga-server:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-48squeeze1) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Feb 25 01:04:36 UTC 2013
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000eff0000 (usable)
[ 0.000000] BIOS-e820: 000000000eff0000 - 000000000eff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000000eff3000 - 000000000f000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0xeff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF uncachable
[ 0.000000] F0000-F7FFF write-through
[ 0.000000] F8000-F8FFF uncachable
[ 0.000000] F9000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FF0000000 write-back
[ 0.000000] 1 base 00F000000 mask FFF000000 uncachable
[ 0.000000] 2 base 0E8000000 mask FF8000000 write-combining
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-000000000eff0000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 000ec00000 page 2M
[ 0.000000] 000ec00000 - 000eff0000 page 4k
[ 0.000000] kernel direct mapping tables up to eff0000 @ 7000-d000
[ 0.000000] RAMDISK: 0abe1000 - 0b433d28
[ 0.000000] ACPI: RSDP 000f88b0 00014 (v00 CN333 )
[ 0.000000] ACPI: RSDT 0eff3040 00028 (v01 CN333 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 0eff30c0 00074 (v01 CN333 AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 0eff3180 0413D (v01 CN333 AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 0eff0000 00040
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 239MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 0eff0000
[ 0.000000] low ram: 0 - 0eff0000
[ 0.000000] node 0 low ram: 00000000 - 0eff0000
[ 0.000000] node 0 bootmap 00002000 - 00003e00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 000eff0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014ced2c] TEXT DATA BSS ==> [0001000000 - 00014ced2c]
[ 0.000000] #4 [000abe1000 - 000b433d28] RAMDISK ==> [000abe1000 - 000b433d28]
[ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #6 [00014cf000 - 00014d50ae] BRK ==> [00014cf000 - 00014d50ae]
[ 0.000000] #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
[ 0.000000] #8 [0000002000 - 0000004000] BOOTMAP ==> [0000002000 - 0000004000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0000eff0
[ 0.000000] HighMem 0x0000eff0 -> 0x0000eff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0000eff0
[ 0.000000] On node 0 totalpages: 61327
[ 0.000000] free_area_init_node: node 0, pgdat c13b6900, node_mem_map c14d7000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3967 pages, LIFO batch:0
[ 0.000000] Normal zone: 448 pages used for memmap
[ 0.000000] Normal zone: 56880 pages, LIFO batch:15
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] No local APIC present or hardware disabled
[ 0.000000] APIC: disable apic facility
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at f000000 (gap: f000000:f0ff0000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s34360 r0 d22984 u4194304
[ 0.000000] pcpu-alloc: s34360 r0 d22984 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60847
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=89d06e05-2590-416b-a777-748c3287b0dd ro quiet
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 229336k/245696k available (2509k kernel code, 15704k reserved, 1331k data, 380k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xcf7f0000 - 0xff3fe000 ( 764 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xceff0000 ( 239 MB)
[ 0.000000] .init : 0xc13c1000 - 0xc1420000 ( 380 kB)
[ 0.000000] .data : 0xc12735eb - 0xc13c0504 (1331 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12735eb (2509 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1000.042 MHz processor.
[ 0.008010] Calibrating delay loop (skipped), value calculated using timer frequency.. 2000.08 BogoMIPS (lpj=4000168)
[ 0.008073] Security Framework initialized
[ 0.008095] SELinux: Disabled at boot.
[ 0.008118] Mount-cache hash table entries: 512
[ 0.008462] Initializing cgroup subsys ns
[ 0.008473] Initializing cgroup subsys cpuacct
[ 0.008487] Initializing cgroup subsys devices
[ 0.008497] Initializing cgroup subsys freezer
[ 0.008505] Initializing cgroup subsys net_cls
[ 0.008564] CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
[ 0.008574] CPU: L2 Cache: 64K (32 bytes/line)
[ 0.008614] Performance Events:
[ 0.008626] Checking 'hlt' instruction... OK.
[ 0.024593] SMP alternatives: switching to UP code
[ 0.037983] Freeing SMP alternatives: 13k freed
[ 0.038051] ACPI: Core revision 20090903
[ 0.047982] ACPI: setting ELCR to 0200 (from 1e00)
[ 0.049362] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.049371] weird, boot CPU (#0) not listed by the BIOS.
[ 0.049378] SMP motherboard not detected.
[ 0.049386] Local APIC not detected. Using dummy APIC emulation.
[ 0.049393] SMP disabled
[ 0.050012] Brought up 1 CPUs
[ 0.050025] Total of 1 processors activated (2000.08 BogoMIPS).
[ 0.050068] CPU0 attaching NULL sched-domain.
[ 0.050512] devtmpfs: initialized
[ 0.051853] regulator: core version 0.5
[ 0.052067] NET: Registered protocol family 16
[ 0.052334] ACPI: bus type pci registered
[ 0.053943] PCI: PCI BIOS revision 2.10 entry at 0xfa800, last bus=1
[ 0.053952] PCI: Using configuration type 1 for base access
[ 0.055184] bio: create slab <bio-0> at 0
[ 0.056844] ACPI: EC: Look up EC in DSDT
[ 0.071942] ACPI: Interpreter enabled
[ 0.071955] ACPI: (supports S0 S1 S4 S5)
[ 0.072055] ACPI: Using PIC for interrupt routing
[ 0.085462] ACPI: No dock devices found.
[ 0.085732] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.085858] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe8000000-0xefffffff]
[ 0.086329] pci 0000:00:01.0: supports D1
[ 0.086425] pci 0000:00:0f.0: reg 20 io port: [0xe000-0xe00f]
[ 0.086542] pci 0000:00:10.0: reg 20 io port: [0xe100-0xe11f]
[ 0.086591] pci 0000:00:10.0: supports D1 D2
[ 0.086600] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.086612] pci 0000:00:10.0: PME# disabled
[ 0.086684] pci 0000:00:10.1: reg 20 io port: [0xe200-0xe21f]
[ 0.086733] pci 0000:00:10.1: supports D1 D2
[ 0.086742] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.086753] pci 0000:00:10.1: PME# disabled
[ 0.086827] pci 0000:00:10.2: reg 20 io port: [0xe300-0xe31f]
[ 0.086876] pci 0000:00:10.2: supports D1 D2
[ 0.086884] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.086896] pci 0000:00:10.2: PME# disabled
[ 0.086969] pci 0000:00:10.3: reg 20 io port: [0xe400-0xe41f]
[ 0.087018] pci 0000:00:10.3: supports D1 D2
[ 0.087026] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.087038] pci 0000:00:10.3: PME# disabled
[ 0.087091] pci 0000:00:10.4: reg 10 32bit mmio: [0xf6000000-0xf60000ff]
[ 0.087160] pci 0000:00:10.4: supports D1 D2
[ 0.087169] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.087181] pci 0000:00:10.4: PME# disabled
[ 0.087269] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.087365] pci 0000:00:11.5: reg 10 io port: [0xe500-0xe5ff]
[ 0.087437] pci 0000:00:11.5: supports D1 D2
[ 0.087493] pci 0000:00:12.0: reg 10 io port: [0xe600-0xe6ff]
[ 0.087510] pci 0000:00:12.0: reg 14 32bit mmio: [0xf6001000-0xf60010ff]
[ 0.087576] pci 0000:00:12.0: supports D1 D2
[ 0.087584] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.087596] pci 0000:00:12.0: PME# disabled
[ 0.087683] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xf0000000-0xf3ffffff]
[ 0.087701] pci 0000:01:00.0: reg 14 32bit mmio: [0xf4000000-0xf4ffffff]
[ 0.087734] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[ 0.087778] pci 0000:01:00.0: supports D1 D2
[ 0.087844] pci 0000:00:01.0: bridge 32bit mmio: [0xf4000000-0xf5ffffff]
[ 0.087859] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf0000000-0xf3ffffff]
[ 0.087878] pci_bus 0000:00: on NUMA node 0
[ 0.087900] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.173848] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12)
[ 0.174331] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 *12)
[ 0.174817] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12)
[ 0.175245] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.175661] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.176092] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.176491] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.176887] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.177234] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.177244] vgaarb: loaded
[ 0.177489] PCI: Using ACPI for IRQ routing
[ 0.177922] Switching to clocksource tsc
[ 0.180001] pnp: PnP ACPI init
[ 0.180001] ACPI: bus type pnp registered
[ 0.188825] pnp: PnP ACPI: found 11 devices
[ 0.188835] ACPI: ACPI bus type pnp unregistered
[ 0.188847] PnPBIOS: Disabled by ACPI PNP
[ 0.188884] system 00:00: iomem range 0xd0000-0xd3fff has been reserved
[ 0.188898] system 00:00: iomem range 0xda000-0xdbfff has been reserved
[ 0.188911] system 00:00: iomem range 0xf0000-0xfbfff could not be reserved
[ 0.188925] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 0.188939] system 00:00: iomem range 0xeff0000-0xeffffff could not be reserved
[ 0.188954] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.188967] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.188981] system 00:00: iomem range 0x100000-0xefeffff could not be reserved
[ 0.188995] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.189009] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved
[ 0.189035] system 00:02: ioport range 0x400-0x47f has been reserved
[ 0.189048] system 00:02: ioport range 0x500-0x50f has been reserved
[ 0.189070] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
[ 0.189083] system 00:03: ioport range 0x800-0x87f has been reserved
[ 0.189096] system 00:03: ioport range 0x880-0x8ff has been reserved
[ 0.224355] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.224366] pci 0000:00:01.0: IO window: disabled
[ 0.224381] pci 0000:00:01.0: MEM window: 0xf4000000-0xf5ffffff
[ 0.224395] pci 0000:00:01.0: PREFETCH window: 0xf0000000-0xf3ffffff
[ 0.224425] pci 0000:00:01.0: setting latency timer to 64
[ 0.224441] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.224452] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.224466] pci_bus 0000:01: resource 1 mem: [0xf4000000-0xf5ffffff]
[ 0.224478] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf3ffffff]
[ 0.224590] NET: Registered protocol family 2
[ 0.224885] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.225878] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.226149] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.226401] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.226410] TCP reno registered
[ 0.226723] NET: Registered protocol family 1
[ 0.226813] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.228036] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 0.228047] PCI: setting IRQ 11 as level-triggered
[ 0.228064] pci 0000:00:10.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 0.228094] pci 0000:00:10.0: PCI INT A disabled
[ 0.228125] pci 0000:00:10.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 0.228151] pci 0000:00:10.1: PCI INT A disabled
[ 0.229147] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 12
[ 0.229156] PCI: setting IRQ 12 as level-triggered
[ 0.229171] pci 0000:00:10.2: PCI INT B -> Link[LNKB] -> GSI 12 (level, low) -> IRQ 12
[ 0.229199] pci 0000:00:10.2: PCI INT B disabled
[ 0.229227] pci 0000:00:10.3: PCI INT B -> Link[LNKB] -> GSI 12 (level, low) -> IRQ 12
[ 0.229253] pci 0000:00:10.3: PCI INT B disabled
[ 0.230268] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 0.230277] PCI: setting IRQ 10 as level-triggered
[ 0.230293] pci 0000:00:10.4: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 0.230362] pci 0000:00:10.4: PCI INT C disabled
[ 0.230378] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
[ 0.230404] pci 0000:01:00.0: Boot video device
[ 0.230558] Unpacking initramfs...
[ 1.301888] Freeing initrd memory: 8523k freed
[ 1.346228] audit: initializing netlink socket (disabled)
[ 1.346266] type=2000 audit(1362685696.344:1): initialized
[ 1.359719] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.365403] VFS: Disk quotas dquot_6.5.2
[ 1.365627] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.365871] msgmni has been set to 465
[ 1.366541] alg: No test for stdrng (krng)
[ 1.366655] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.366666] io scheduler noop registered
[ 1.366674] io scheduler anticipatory registered
[ 1.366682] io scheduler deadline registered
[ 1.366819] io scheduler cfq registered (default)
[ 1.367327] isapnp: Scanning for PnP cards...
[ 1.721570] isapnp: No Plug & Play device found
[ 1.726003] Linux agpgart interface v0.103
[ 1.726389] agpgart: Detected VIA PM800/PN800/PM880/PN880 chipset
[ 1.734879] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
[ 1.734955] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.735121] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.735327] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.736083] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.736337] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.736784] PNP: No PS/2 controller found. Probing ports directly.
[ 1.988148] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.988433] mice: PS/2 mouse device common for all mice
[ 1.988559] rtc_cmos 00:05: RTC can wake from S4
[ 1.988686] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.988737] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 1.988785] cpuidle: using governor ladder
[ 1.988792] cpuidle: using governor menu
[ 1.988806] No iBFT detected.
[ 1.990242] TCP cubic registered
[ 1.990769] NET: Registered protocol family 10
[ 1.993568] Mobile IPv6
[ 1.993580] NET: Registered protocol family 17
[ 1.993642] Using IPI No-Shortcut mode
[ 1.993925] PM: Resume from disk failed.
[ 1.993956] registered taskstats version 1
[ 1.994641] rtc_cmos 00:05: setting system clock to 2013-03-07 19:48:17 UTC (1362685697)
[ 1.994839] Initalizing network drop monitor service
[ 1.994940] Freeing unused kernel memory: 380k freed
[ 1.996919] Write protecting the kernel text: 2512k
[ 1.997013] Write protecting the kernel read-only data: 924k
[ 2.068324] udev[46]: starting version 164
[ 2.727741] usbcore: registered new interface driver usbfs
[ 2.728521] usbcore: registered new interface driver hub
[ 2.729243] usbcore: registered new device driver usb
[ 2.747545] SCSI subsystem initialized
[ 2.761590] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.761692] ehci_hcd 0000:00:10.4: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 2.761747] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 2.761820] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[ 2.761927] ehci_hcd 0000:00:10.4: irq 10, io mem 0xf6000000
[ 2.769515] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 2.772165] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 2.772281] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.772292] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.772303] usb usb1: Product: EHCI Host Controller
[ 2.772312] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
[ 2.772321] usb usb1: SerialNumber: 0000:00:10.4
[ 2.772905] usb usb1: configuration #1 chosen from 1 choice
[ 2.773144] hub 1-0:1.0: USB hub found
[ 2.773186] hub 1-0:1.0: 8 ports detected
[ 2.773494] via-rhine 0000:00:12.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 2.784654] ACPI Error (psargs-0359): [RBYT] Namespace lookup failure, AE_NOT_FOUND
[ 2.784679] ACPI Error (psparse-0537): Method parse/execution failed [\RTMP] (Node ce81ad38), AE_NOT_FOUND
[ 2.784799] ACPI Error (psparse-0537): Method parse/execution failed [\_TZ_.THRM._TMP] (Node ce81ae70), AE_NOT_FOUND
[ 2.788179] eth0: VIA Rhine II at 0x1e600, 00:80:64:5e:b3:61, IRQ 11.
[ 2.788904] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[ 2.894904] libata version 3.00 loaded.
[ 2.912473] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.912687] uhci_hcd 0000:00:10.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 2.912720] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 2.912767] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 2.912825] uhci_hcd 0000:00:10.0: irq 11, io base 0x0000e100
[ 2.913013] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.913025] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.913035] usb usb2: Product: UHCI Host Controller
[ 2.913044] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 2.913053] usb usb2: SerialNumber: 0000:00:10.0
[ 2.913678] usb usb2: configuration #1 chosen from 1 choice
[ 2.913916] hub 2-0:1.0: USB hub found
[ 2.913954] hub 2-0:1.0: 2 ports detected
[ 2.914140] uhci_hcd 0000:00:10.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 2.914168] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 2.914219] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 2.914267] uhci_hcd 0000:00:10.1: irq 11, io base 0x0000e200
[ 2.914434] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.914445] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.914455] usb usb3: Product: UHCI Host Controller
[ 2.914464] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 2.914473] usb usb3: SerialNumber: 0000:00:10.1
[ 2.927398] usb usb3: configuration #1 chosen from 1 choice
[ 2.927815] hub 3-0:1.0: USB hub found
[ 2.927863] hub 3-0:1.0: 2 ports detected
[ 2.928169] uhci_hcd 0000:00:10.2: PCI INT B -> Link[LNKB] -> GSI 12 (level, low) -> IRQ 12
[ 2.928200] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 2.928231] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 2.928283] uhci_hcd 0000:00:10.2: irq 12, io base 0x0000e300
[ 2.928459] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.928471] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.928481] usb usb4: Product: UHCI Host Controller
[ 2.928490] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 2.928499] usb usb4: SerialNumber: 0000:00:10.2
[ 2.929931] usb usb4: configuration #1 chosen from 1 choice
[ 2.930329] hub 4-0:1.0: USB hub found
[ 2.930371] hub 4-0:1.0: 2 ports detected
[ 2.930568] uhci_hcd 0000:00:10.3: PCI INT B -> Link[LNKB] -> GSI 12 (level, low) -> IRQ 12
[ 2.930603] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 2.930633] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 2.930683] uhci_hcd 0000:00:10.3: irq 12, io base 0x0000e400
[ 2.930855] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.930866] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.930877] usb usb5: Product: UHCI Host Controller
[ 2.930885] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd
[ 2.930894] usb usb5: SerialNumber: 0000:00:10.3
[ 2.944146] usb usb5: configuration #1 chosen from 1 choice
[ 2.944544] hub 5-0:1.0: USB hub found
[ 2.944584] hub 5-0:1.0: 2 ports detected
[ 2.964835] pata_via 0000:00:0f.0: version 0.3.4
[ 2.964885] pata_via 0000:00:0f.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 2.964900] pata_via 0000:00:0f.0: VIA VLink IRQ fixup, from 255 to 11
[ 2.968836] fan PNP0C0B:00: registered as cooling_device0
[ 2.968868] ACPI: Fan [FAN] (on)
[ 2.970744] scsi0 : pata_via
[ 2.972529] scsi1 : pata_via
[ 2.981482] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14
[ 2.981498] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15
[ 3.084076] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 3.144459] ata1.00: CFA: CF CARD 4GB, Ver6.04K, max UDMA/133
[ 3.144473] ata1.00: 7806960 sectors, multi 1: LBA48
[ 3.144531] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 3.152327] ata1.00: configured for UDMA/33
[ 3.152650] scsi 0:0:0:0: Direct-Access ATA CF CARD 4GB Ver6 PQ: 0 ANSI: 5
[ 3.153515] ata2: port disabled. ignoring.
[ 3.193982] sd 0:0:0:0: [sda] 7806960 512-byte logical blocks: (3.99 GB/3.72 GiB)
[ 3.194137] sd 0:0:0:0: [sda] Write Protect is off
[ 3.194149] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.194215] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.194666] sda: sda1 sda2 < sda5 >
[ 3.200394] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.218033] usb 1-1: New USB device found, idVendor=090c, idProduct=1000
[ 3.218048] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.218060] usb 1-1: Product: USB Flash Disk
[ 3.218068] usb 1-1: Manufacturer: General
[ 3.218076] usb 1-1: SerialNumber: 0421QQ0000002056
[ 3.218419] usb 1-1: configuration #1 chosen from 1 choice
[ 3.265942] Initializing USB Mass Storage driver...
[ 3.266318] scsi2 : SCSI emulation for USB Mass Storage devices
[ 3.267177] usbcore: registered new interface driver usb-storage
[ 3.267190] USB Mass Storage support registered.
[ 3.270573] usb-storage: device found at 2
[ 3.270583] usb-storage: waiting for device to settle before scanning
[ 3.427589] PM: Starting manual resume from disk
[ 3.427606] PM: Resume from partition 8:5
[ 3.427612] PM: Checking hibernation image.
[ 3.428709] PM: Error -22 checking image file
[ 3.428717] PM: Resume from disk failed.
[ 3.503990] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 3.504003] EXT3-fs: write access will be enabled during recovery.
[ 3.640078] usb 2-2: new full speed USB device using uhci_hcd and address 2
[ 3.796868] usb 2-2: New USB device found, idVendor=0c45, idProduct=613e
[ 3.796883] usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.796894] usb 2-2: Product: USB camera
[ 3.797277] usb 2-2: configuration #1 chosen from 1 choice
[ 8.268376] usb-storage: device scan complete
[ 8.269090] scsi 2:0:0:0: Direct-Access General USB Flash Disk 1100 PQ: 0 ANSI: 4
[ 8.273938] sd 2:0:0:0: [sdb] 31494144 512-byte logical blocks: (16.1 GB/15.0 GiB)
[ 8.274684] sd 2:0:0:0: [sdb] Write Protect is off
[ 8.274701] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 8.274711] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 8.277547] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 8.277625] sdb: sdb1
[ 8.281187] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 8.281266] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 32.504110] kjournald starting. Commit interval 5 seconds
[ 32.504156] EXT3-fs: sda1: orphan cleanup on readonly fs
[ 32.504177] ext3_orphan_cleanup: deleting unreferenced inode 8132
[ 32.504315] EXT3-fs: sda1: 1 orphan inode deleted
[ 32.504322] EXT3-fs: recovery complete.
[ 33.175667] EXT3-fs: mounted filesystem with ordered data mode.
[ 33.760146] udev[273]: starting version 164
[ 34.408322] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 34.473919] udev[326]: renamed network interface eth0 to eth1
[ 34.734452] Marking TSC unstable due to TSC halts in idle
[ 34.734781] processor LNXCPU:00: registered as cooling_device1
[ 34.743317] Switching to clocksource acpi_pm
[ 34.793782] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 34.793809] ACPI: Power Button [PWRB]
[ 34.794030] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 34.794055] ACPI: Sleep Button [SLPB]
[ 34.794304] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 34.794319] ACPI: Power Button [PWRF]
[ 34.953310] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 35.012972] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 35.031006] parport_pc 00:0a: reported by Plug and Play ACPI
[ 35.031051] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 35.161038] Linux video capture interface: v2.00
[ 35.216744] gspca: main v2.7.0 registered
[ 35.286333] gspca: probing 0c45:613e
[ 35.292552] sonixj: Sonix chip id: 12
[ 35.303658] gspca: probe ok
[ 35.303720] usbcore: registered new interface driver sonixj
[ 35.303731] sonixj: registered
[ 35.307301] Error: Driver 'pcspkr' is already registered, aborting...
[ 35.406507] VIA 82xx Audio 0000:00:11.5: PCI INT C -> Link[LNKC] -> GSI 10 (level, low) -> IRQ 10
[ 35.406676] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[ 36.402895] Adding 210936k swap on /dev/sda5. Priority:-1 extents:1 across:210936k
[ 36.561909] EXT3 FS on sda1, internal journal
[ 36.873996] loop: module loaded
[ 36.917570] vt1211: Found VT1211 chip at 0x6000, revision 2
[ 37.210675] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
[ 37.839716] RPC: Registered udp transport module.
[ 37.839728] RPC: Registered tcp transport module.
[ 37.839736] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 37.928806] Slow work thread pool: Starting up
[ 37.928966] Slow work thread pool: Ready
[ 37.929212] FS-Cache: Loaded
[ 38.066753] FS-Cache: Netfs 'nfs' registered for caching
[ 38.161895] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 38.283725] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 41.312249] svc: failed to register lockdv1 RPC service (errno 97).
[ 41.320337] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 41.324749] NFSD: starting 90-second grace period
[ 48.700100] eth1: no IPv6 routers present
Kod: Zaznacz cały
crw-rw-rw- 1 root video 81, 0 03-10 15:00 /dev/video0
Kod: Zaznacz cały
szlejk@donga-server:~$ sudo motion -n
[0] Processing thread 0 - config file /etc/motion/motion.conf
[0] Motion 3.2.12 Started
[0] ffmpeg LIBAVCODEC_BUILD 3412993 LIBAVFORMAT_BUILD 3415808
[0] Thread 1 is from /etc/motion/motion.conf
[1] Thread 1 started
[1] cap.driver: "sonixj"
[1] cap.card: "USB camera"
[1] cap.bus_info: "usb-0000:00:10.0-2"
[1] cap.capabilities=0x05000001
[1] - VIDEO_CAPTURE
[1] - READWRITE
[1] - STREAMING
[1] Config palette index 8 (YU12) doesn't work.
[0] motion-httpd/3.2.12 running, accepting connections
[0] motion-httpd: waiting for data on port TCP 8080
[1] Supported palettes:
[1] 0: JPEG (JPEG)
[1] Selected palette JPEG
[1] Test palette JPEG (320x240)
[1] Using palette JPEG (320x240) bytesperlines 320 sizeimage 29390 colorspace 00000007
[1] found control 0x00980900, "Brightness", range 0,65535
[1] "Brightness", default 32768, current 32768
[1] found control 0x00980901, "Contrast", range 0,127
[1] "Contrast", default 63, current 63
[1] found control 0x00980902, "Saturation", range 0,40
[1] "Saturation", default 25, current 25
[1] found control 0x0098090e, "Red Balance", range 24,40
[1] "Red Balance", default 32, current 32
[1] found control 0x0098090f, "Blue Balance", range 24,40
[1] "Blue Balance", default 32, current 32
[1] found control 0x00980910, "Gamma", range 0,40
[1] "Gamma", default 20, current 20
[1] found control 0x00980912, "Auto Gain", range 0,1
[1] "Auto Gain", default 1, current 1
[1] mmap information:
[1] frames=4
[1] 0 length=32768
[1] 1 length=32768
[1] 2 length=32768
[1] 3 length=32768
[1] Using V4L2
[1] Resizing pre_capture buffer to 1 items
[1] v4l2_next: VIDIOC_DQBUF: EIO (s->pframe 0): Input/output error
[1] v4l2_next: VIDIOC_QBUF: Invalid argument
[1] v4l2_next: VIDIOC_QBUF: Invalid argument
[1] v4l2_next: VIDIOC_QBUF: Invalid argument
[1] v4l2_next: VIDIOC_QBUF: Invalid argument
[1] Error capturing first image
[1] Started stream webcam server in port 8081
[1] v4l2_next: VIDIOC_QBUF: Invalid argument
[1] Video device fatal error - Closing video device
[1] Closing video device /dev/video0
[1] Retrying until successful connection with camera