Witam
.
Ekran robi się czarny na chwilę, po czym wszystko wraca do normy. Wina pewnie leży gdzieś po stronie sterowników lub karty graficznej. Przed instalacją sterowników takiego problemu nie miałem.
Kod: Zaznacz cały
uname -a
Linux easy 3.2.0-4-amd64 #1 SMP Debian 3.2.35-2 x86_64 GNU/Linux
log Xorg
Kod: Zaznacz cały
[ 13.616] X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 13.616] X Protocol Version 11, Revision 0
[ 13.616] Build Operating System: Linux 3.2.0-4.drm-amd64 x86_64 Debian
[ 13.616] Current Operating System: Linux easy 3.2.0-4-amd64 #1 SMP Debian 3.2.35-2 x86_64
[ 13.616] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=98561119-097b-4b9f-bc6c-eaa69fa0356f ro quiet nomodeset
[ 13.616] Build Date: 29 November 2012 07:18:16PM
[ 13.616] xorg-server 2:1.12.4-4 (Julien Cristau <jcristau@debian.org>)
[ 13.616] Current version of pixman: 0.26.0
[ 13.616] Before reporting problems, check [URL]http://wiki.x.org[/URL]
to make sure that you have the latest version.
[ 13.616] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 13.616] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 30 22:40:13 2013
[ 13.639] (==) Using config file: "/etc/X11/xorg.conf"
[ 13.639] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 13.730] (==) ServerLayout "Layout0"
[ 13.730] (**) |-->Screen "Screen0" (0)
[ 13.730] (**) | |-->Monitor "Monitor0"
[ 13.730] (**) | |-->Device "Device0"
[ 13.730] (**) |-->Input Device "Keyboard0"
[ 13.730] (**) |-->Input Device "Mouse0"
[ 13.730] (==) Automatically adding devices
[ 13.730] (==) Automatically enabling devices
[ 13.780] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 13.780] Entry deleted from font path.
[ 13.801] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 13.801] Entry deleted from font path.
[ 13.801] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 13.801] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 13.801] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 13.801] (WW) Disabling Keyboard0
[ 13.801] (WW) Disabling Mouse0
[ 13.801] (II) Loader magic: 0x7f57c8734ae0
[ 13.801] (II) Module ABI versions:
[ 13.802] X.Org ANSI C Emulation: 0.4
[ 13.802] X.Org Video Driver: 12.1
[ 13.802] X.Org XInput driver : 16.0
[ 13.802] X.Org Server Extension : 6.0
[ 13.803] (--) PCI:*(0:1:0:0) 10de:0422:10b0:1401 rev 161, Mem @ 0xfd000000/16777216, 0xe0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000dc00/128, BIOS @ 0x????????/131072
[ 13.803] (II) Open ACPI successful (/var/run/acpid.socket)
[ 13.803] (II) LoadModule: "extmod"
[ 13.827] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 13.837] (II) Module extmod: vendor="X.Org Foundation"
[ 13.838] compiled for 1.12.4, module version = 1.0.0
[ 13.838] Module class: X.Org Server Extension
[ 13.838] ABI class: X.Org Server Extension, version 6.0
[ 13.838] (II) Loading extension SELinux
[ 13.838] (II) Loading extension MIT-SCREEN-SAVER
[ 13.838] (II) Loading extension XFree86-VidModeExtension
[ 13.838] (II) Loading extension XFree86-DGA
[ 13.838] (II) Loading extension DPMS
[ 13.838] (II) Loading extension XVideo
[ 13.838] (II) Loading extension XVideo-MotionCompensation
[ 13.838] (II) Loading extension X-Resource
[ 13.838] (II) LoadModule: "dbe"
[ 13.838] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 13.839] (II) Module dbe: vendor="X.Org Foundation"
[ 13.839] compiled for 1.12.4, module version = 1.0.0
[ 13.839] Module class: X.Org Server Extension
[ 13.839] ABI class: X.Org Server Extension, version 6.0
[ 13.839] (II) Loading extension DOUBLE-BUFFER
[ 13.839] (II) LoadModule: "glx"
[ 13.839] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 14.538] (II) Module glx: vendor="NVIDIA Corporation"
[ 14.538] compiled for 4.0.2, module version = 1.0.0
[ 14.538] Module class: X.Org Server Extension
[ 14.538] (II) NVIDIA GLX Module 310.32 Mon Jan 14 15:02:04 PST 2013
[ 14.538] (II) Loading extension GLX
[ 14.538] (II) LoadModule: "record"
[ 14.538] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 14.551] (II) Module record: vendor="X.Org Foundation"
[ 14.551] compiled for 1.12.4, module version = 1.13.0
[ 14.551] Module class: X.Org Server Extension
[ 14.551] ABI class: X.Org Server Extension, version 6.0
[ 14.551] (II) Loading extension RECORD
[ 14.551] (II) LoadModule: "dri"
[ 14.551] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 14.559] (II) Module dri: vendor="X.Org Foundation"
[ 14.559] compiled for 1.12.4, module version = 1.0.0
[ 14.559] ABI class: X.Org Server Extension, version 6.0
[ 14.559] (II) Loading extension XFree86-DRI
[ 14.559] (II) LoadModule: "dri2"
[ 14.560] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 14.560] (II) Module dri2: vendor="X.Org Foundation"
[ 14.560] compiled for 1.12.4, module version = 1.2.0
[ 14.560] ABI class: X.Org Server Extension, version 6.0
[ 14.560] (II) Loading extension DRI2
[ 14.560] (II) LoadModule: "nvidia"
[ 14.561] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 14.661] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 14.661] compiled for 4.0.2, module version = 1.0.0
[ 14.661] Module class: X.Org Video Driver
[ 14.668] (II) NVIDIA dlloader X Driver 310.32 Mon Jan 14 14:42:46 PST 2013
[ 14.668] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 14.669] (++) using VT number 7
[ 14.678] (II) Loading sub module "wfb"
[ 14.678] (II) LoadModule: "wfb"
[ 14.678] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 14.692] (II) Module wfb: vendor="X.Org Foundation"
[ 14.692] compiled for 1.12.4, module version = 1.0.0
[ 14.692] ABI class: X.Org ANSI C Emulation, version 0.4
[ 14.692] (II) Loading sub module "ramdac"
[ 14.692] (II) LoadModule: "ramdac"
[ 14.692] (II) Module "ramdac" already built-in
[ 14.695] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 14.695] (==) NVIDIA(0): RGB weight 888
[ 14.695] (==) NVIDIA(0): Default visual is TrueColor
[ 14.695] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 14.697] (**) NVIDIA(0): Enabling 2D acceleration
[ 15.857] (II) NVIDIA(GPU-0): Display (LG Electronics L1919S (CRT-1)) does not support
[ 15.857] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
[ 15.858] (II) NVIDIA(0): NVIDIA GPU GeForce 8400 GS (G86) at PCI:1:0:0 (GPU-0)
[ 15.858] (--) NVIDIA(0): Memory: 524288 kBytes
[ 15.858] (--) NVIDIA(0): VideoBIOS: 60.86.65.00.00
[ 15.858] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 15.861] (--) NVIDIA(0): Valid display device(s) on GeForce 8400 GS at PCI:1:0:0
[ 15.861] (--) NVIDIA(0): CRT-0
[ 15.861] (--) NVIDIA(0): LG Electronics L1919S (CRT-1) (connected)
[ 15.861] (--) NVIDIA(0): DFP-0
[ 15.861] (--) NVIDIA(0): DFP-1
[ 15.861] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 15.861] (--) NVIDIA(0): LG Electronics L1919S (CRT-1): 400.0 MHz maximum pixel clock
[ 15.861] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[ 15.861] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 15.861] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[ 15.861] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 15.861] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 15.861] (**) NVIDIA(0): device LG Electronics L1919S (CRT-1) (Using EDID
[ 15.862] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 15.864] (==) NVIDIA(0):
[ 15.864] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 15.864] (==) NVIDIA(0): will be used as the requested mode.
[ 15.864] (==) NVIDIA(0):
[ 15.865] (II) NVIDIA(0): Validated MetaModes:
[ 15.865] (II) NVIDIA(0): "CRT-1:nvidia-auto-select"
[ 15.865] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
[ 15.884] (--) NVIDIA(0): DPI set to (85, 86); computed from "UseEdidDpi" X config
[ 15.884] (--) NVIDIA(0): option
[ 15.884] (--) Depth 24 pixmap format is 32 bpp
[ 15.885] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 15.900] (II) NVIDIA(0): Setting mode "CRT-1:nvidia-auto-select"
[ 15.950] (II) Loading extension NV-GLX
[ 16.008] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 16.008] (==) NVIDIA(0): Backing store disabled
[ 16.008] (==) NVIDIA(0): Silken mouse enabled
[ 16.009] (**) NVIDIA(0): DPMS enabled
[ 16.078] (II) Loading extension NV-CONTROL
[ 16.091] (II) Loading extension XINERAMA
[ 16.091] (II) Loading sub module "dri2"
[ 16.091] (II) LoadModule: "dri2"
[ 16.091] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 16.091] (II) Module dri2: vendor="X.Org Foundation"
[ 16.091] compiled for 1.12.4, module version = 1.2.0
[ 16.091] ABI class: X.Org Server Extension, version 6.0
[ 16.091] (II) NVIDIA(0): [DRI2] Setup complete
[ 16.092] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 16.092] (--) RandR disabled
[ 16.092] (II) Initializing built-in extension Generic Event Extension
[ 16.092] (II) Initializing built-in extension SHAPE
[ 16.092] (II) Initializing built-in extension MIT-SHM
[ 16.092] (II) Initializing built-in extension XInputExtension
[ 16.092] (II) Initializing built-in extension XTEST
[ 16.092] (II) Initializing built-in extension BIG-REQUESTS
[ 16.092] (II) Initializing built-in extension SYNC
[ 16.092] (II) Initializing built-in extension XKEYBOARD
[ 16.092] (II) Initializing built-in extension XC-MISC
[ 16.092] (II) Initializing built-in extension SECURITY
[ 16.092] (II) Initializing built-in extension XINERAMA
[ 16.092] (II) Initializing built-in extension XFIXES
[ 16.092] (II) Initializing built-in extension RENDER
[ 16.092] (II) Initializing built-in extension RANDR
[ 16.092] (II) Initializing built-in extension COMPOSITE
[ 16.092] (II) Initializing built-in extension DAMAGE
[ 16.092] (II) SELinux: Disabled on system
[ 16.095] (II) Initializing extension GLX
[ 16.584] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 16.584] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.585] (II) LoadModule: "evdev"
[ 16.585] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 16.604] (II) Module evdev: vendor="X.Org Foundation"
[ 16.604] compiled for 1.12.1, module version = 2.7.0
[ 16.604] Module class: X.Org XInput Driver
[ 16.604] ABI class: X.Org XInput driver, version 16.0
[ 16.604] (II) Using input driver 'evdev' for 'Power Button'
[ 16.604] (**) Power Button: always reports core events
[ 16.604] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 16.604] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 16.604] (--) evdev: Power Button: Found keys
[ 16.604] (II) evdev: Power Button: Configuring as keyboard
[ 16.604] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 16.604] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 16.604] (**) Option "xkb_rules" "evdev"
[ 16.604] (**) Option "xkb_model" "pc105"
[ 16.604] (**) Option "xkb_layout" "pl"
[ 16.732] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 16.732] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.732] (II) Using input driver 'evdev' for 'Power Button'
[ 16.732] (**) Power Button: always reports core events
[ 16.732] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 16.732] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 16.732] (--) evdev: Power Button: Found keys
[ 16.732] (II) evdev: Power Button: Configuring as keyboard
[ 16.732] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 16.732] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 16.732] (**) Option "xkb_rules" "evdev"
[ 16.732] (**) Option "xkb_model" "pc105"
[ 16.732] (**) Option "xkb_layout" "pl"
[ 16.733] (II) config/udev: Adding input device zc3xx (/dev/input/event5)
[ 16.733] (**) zc3xx: Applying InputClass "evdev keyboard catchall"
[ 16.733] (II) Using input driver 'evdev' for 'zc3xx'
[ 16.733] (**) zc3xx: always reports core events
[ 16.733] (**) evdev: zc3xx: Device: "/dev/input/event5"
[ 16.733] (--) evdev: zc3xx: Vendor 0xac8 Product 0x305b
[ 16.733] (--) evdev: zc3xx: Found keys
[ 16.733] (II) evdev: zc3xx: Configuring as keyboard
[ 16.733] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/input/input5/event5"
[ 16.733] (II) XINPUT: Adding extended input device "zc3xx" (type: KEYBOARD, id 8)
[ 16.733] (**) Option "xkb_rules" "evdev"
[ 16.733] (**) Option "xkb_model" "pc105"
[ 16.733] (**) Option "xkb_layout" "pl"
[ 16.734] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3)
[ 16.734] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 16.734] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 16.734] (**) Logitech USB Receiver: always reports core events
[ 16.734] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event3"
[ 16.734] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52e
[ 16.734] (--) evdev: Logitech USB Receiver: Found keys
[ 16.734] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 16.734] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input3/event3"
[ 16.735] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
[ 16.735] (**) Option "xkb_rules" "evdev"
[ 16.735] (**) Option "xkb_model" "pc105"
[ 16.735] (**) Option "xkb_layout" "pl"
[ 16.736] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event4)
[ 16.736] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 16.736] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 16.736] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 16.736] (**) Logitech USB Receiver: always reports core events
[ 16.736] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event4"
[ 16.736] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52e
[ 16.736] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 16.736] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 16.736] (--) evdev: Logitech USB Receiver: Found relative axes
[ 16.736] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 16.736] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 16.736] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 16.736] (--) evdev: Logitech USB Receiver: Found keys
[ 16.736] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 16.736] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 16.736] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 16.736] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 16.736] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 16.736] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input4/event4"
[ 16.736] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 10)
[ 16.736] (**) Option "xkb_rules" "evdev"
[ 16.736] (**) Option "xkb_model" "pc105"
[ 16.736] (**) Option "xkb_layout" "pl"
[ 16.737] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 16.737] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 16.737] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 16.737] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 16.737] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 16.737] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 16.737] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 16.738] (II) No input driver specified, ignoring this device.
[ 16.738] (II) This device may have been added with another device file.
[ 16.738] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 16.738] (II) No input driver specified, ignoring this device.
[ 16.738] (II) This device may have been added with another device file.
[ 16.818] (II) NVIDIA(GPU-0): Display (LG Electronics L1919S (CRT-1)) does not support
[ 16.818] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
[ 16.818] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 16.818] (**) NVIDIA(0): device LG Electronics L1919S (CRT-1) (Using EDID
[ 16.818] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 22.681] (II) NVIDIA(GPU-0): Display (LG Electronics L1919S (CRT-1)) does not support
[ 22.681] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
[ 22.681] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 22.681] (**) NVIDIA(0): device LG Electronics L1919S (CRT-1) (Using EDID
[ 22.681] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 27.134] (II) NVIDIA(GPU-0): Display (LG Electronics L1919S (CRT-1)) does not support
[ 27.134] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
[ 27.134] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 27.134] (**) NVIDIA(0): device LG Electronics L1919S (CRT-1) (Using EDID
[ 27.134] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 30.886] (II) NVIDIA(GPU-0): Display (LG Electronics L1919S (CRT-1)) does not support
[ 30.886] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
[ 30.886] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 30.886] (**) NVIDIA(0): device LG Electronics L1919S (CRT-1) (Using EDID
[ 30.886] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
dmesg
Kod: Zaznacz cały
[ 0.205662] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0290 (mask 0007)[ 0.205714] pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101
[ 0.205730] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.205742] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.205753] pci 0000:00:1f.1: reg 18: [io 0x08f0-0x08f7]
[ 0.205765] pci 0000:00:1f.1: reg 1c: [io 0x08f8-0x08fb]
[ 0.205776] pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf]
[ 0.205823] pci 0000:00:1f.2: [8086:27c0] type 0 class 0x000101
[ 0.205840] pci 0000:00:1f.2: reg 10: [io 0xc400-0xc407]
[ 0.205851] pci 0000:00:1f.2: reg 14: [io 0xc080-0xc083]
[ 0.205861] pci 0000:00:1f.2: reg 18: [io 0xc000-0xc007]
[ 0.205871] pci 0000:00:1f.2: reg 1c: [io 0xbc00-0xbc03]
[ 0.205881] pci 0000:00:1f.2: reg 20: [io 0xb880-0xb88f]
[ 0.205923] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.205946] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[ 0.206004] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.206100] pci 0000:01:00.0: [10de:0422] type 0 class 0x000300
[ 0.206114] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
[ 0.206129] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.206143] pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
[ 0.206153] pci 0000:01:00.0: reg 24: [io 0xdc00-0xdc7f]
[ 0.206164] pci 0000:01:00.0: reg 30: [mem 0xfeae0000-0xfeafffff pref]
[ 0.206233] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.206239] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.206244] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff]
[ 0.206250] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.206300] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[ 0.206388] pci 0000:02:00.0: [10ec:8136] type 0 class 0x000200
[ 0.206410] pci 0000:02:00.0: reg 10: [io 0xe800-0xe8ff]
[ 0.206446] pci 0000:02:00.0: reg 18: [mem 0xfebff000-0xfebfffff 64bit]
[ 0.206487] pci 0000:02:00.0: reg 30: [mem 0xfebc0000-0xfebdffff pref]
[ 0.206578] pci 0000:02:00.0: supports D1 D2
[ 0.206581] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.206611] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.206624] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.206630] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.206635] pci 0000:00:1c.1: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.206714] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.206727] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.206731] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.206735] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.206740] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.206744] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
[ 0.206767] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.207015] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.207169] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.207251] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.207355] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.207362] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.207365] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.219347] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.219453] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.219556] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.219661] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.219763] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.219866] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.219971] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.220094] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.220280] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.220280] vgaarb: loaded
[ 0.220280] vgaarb: bridge control possible 0000:01:00.0
[ 0.220280] PCI: Using ACPI for IRQ routing
[ 0.221890] PCI: pci_cache_line_size set to 64 bytes
[ 0.221982] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.221987] reserve RAM buffer: 00000000dff90000 - 00000000dfffffff
[ 0.222211] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.222219] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.222226] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.228198] Switching to clocksource hpet
[ 0.231544] pnp: PnP ACPI init
[ 0.231578] ACPI: bus type pnp registered
[ 0.231757] pnp 00:00: [bus 00-ff]
[ 0.231762] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.231766] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.231771] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.231778] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.231782] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.231785] pnp 00:00: [mem 0xe0000000-0xffffffff window]
[ 0.231883] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.231906] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.231994] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.232000] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.232080] pnp 00:02: [dma 4]
[ 0.232085] pnp 00:02: [io 0x0000-0x000f]
[ 0.232088] pnp 00:02: [io 0x0081-0x0083]
[ 0.232091] pnp 00:02: [io 0x0087]
[ 0.232094] pnp 00:02: [io 0x0089-0x008b]
[ 0.232097] pnp 00:02: [io 0x008f]
[ 0.232100] pnp 00:02: [io 0x00c0-0x00df]
[ 0.232154] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.232179] pnp 00:03: [io 0x0070-0x0071]
[ 0.232194] pnp 00:03: [irq 8]
[ 0.232248] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.232270] pnp 00:04: [io 0x0061]
[ 0.232322] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.232342] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.232351] pnp 00:05: [irq 13]
[ 0.232406] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.232754] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
[ 0.232759] pnp 00:06: [io 0x0c00-0x0c0f]
[ 0.232762] pnp 00:06: [io 0x0290-0x029f]
[ 0.232765] pnp 00:06: [io 0x0a20-0x0a2f]
[ 0.232769] pnp 00:06: [io 0x0a30-0x0a3f]
[ 0.232860] system 00:06: [io 0x0c00-0x0c0f] has been reserved
[ 0.232865] system 00:06: [io 0x0290-0x029f] has been reserved
[ 0.232870] system 00:06: [io 0x0a20-0x0a2f] has been reserved
[ 0.232874] system 00:06: [io 0x0a30-0x0a3f] has been reserved
[ 0.232880] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.233055] pnp 00:07: [io 0x0010-0x001f]
[ 0.233059] pnp 00:07: [io 0x0022-0x003f]
[ 0.233063] pnp 00:07: [io 0x0044-0x005f]
[ 0.233066] pnp 00:07: [io 0x0062-0x0063]
[ 0.233069] pnp 00:07: [io 0x0065-0x006f]
[ 0.233073] pnp 00:07: [io 0x0072-0x007f]
[ 0.233076] pnp 00:07: [io 0x0080]
[ 0.233079] pnp 00:07: [io 0x0084-0x0086]
[ 0.233082] pnp 00:07: [io 0x0088]
[ 0.233087] pnp 00:07: [io 0x008c-0x008e]
[ 0.233091] pnp 00:07: [io 0x0090-0x009f]
[ 0.233094] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.233097] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.233100] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.233104] pnp 00:07: [io 0x0800-0x087f]
[ 0.233107] pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
[ 0.233111] pnp 00:07: [io 0x0480-0x04bf]
[ 0.233115] pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
[ 0.233118] pnp 00:07: [mem 0xfed20000-0xfed8ffff]
[ 0.233217] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.233223] system 00:07: [io 0x0800-0x087f] has been reserved
[ 0.233227] system 00:07: [io 0x0480-0x04bf] has been reserved
[ 0.233233] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.233237] system 00:07: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.233243] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.233386] pnp 00:08: [mem 0xfed00000-0xfed003ff]
[ 0.233457] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.233563] pnp 00:09: [mem 0xffb00000-0xffbfffff]
[ 0.233568] pnp 00:09: [mem 0xfff00000-0xffffffff]
[ 0.233627] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.233719] pnp 00:0a: [mem 0xffc00000-0xffefffff]
[ 0.233804] system 00:0a: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.233810] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.234038] pnp 00:0b: [io 0x0060]
[ 0.234042] pnp 00:0b: [io 0x0064]
[ 0.234046] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
[ 0.234049] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
[ 0.234138] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.234144] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.234149] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.235595] pnp 00:0c: [io 0x03f8-0x03ff]
[ 0.235605] pnp 00:0c: [irq 4]
[ 0.235609] pnp 00:0c: [dma 0 disabled]
[ 0.235756] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.235828] pnp 00:0d: [mem 0xf0000000-0xf3ffffff]
[ 0.235914] system 00:0d: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.235920] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.236285] pnp 00:0e: [mem 0x00000000-0x0009ffff]
[ 0.236290] pnp 00:0e: [mem 0x000c0000-0x000cffff]
[ 0.236293] pnp 00:0e: [mem 0x000e0000-0x000fffff]
[ 0.236297] pnp 00:0e: [mem 0x00100000-0xdfffffff]
[ 0.236301] pnp 00:0e: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.236403] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.236409] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.236414] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.236419] system 00:0e: [mem 0x00100000-0xdfffffff] could not be reserved
[ 0.236424] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.236714] pnp: PnP ACPI: found 15 devices
[ 0.236717] ACPI: ACPI bus type pnp unregistered
[ 0.246076] PCI: max bus depth: 1 pci_try_num: 2
[ 0.246122] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf4000000-0xf41fffff 64bit pref]
[ 0.246129] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf4200000-0xf43fffff]
[ 0.246135] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf4400000-0xf45fffff 64bit pref]
[ 0.246142] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.246147] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.246152] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.246158] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff]
[ 0.246163] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.246170] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[ 0.246175] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.246181] pci 0000:00:1c.0: bridge window [mem 0xf4200000-0xf43fffff]
[ 0.246187] pci 0000:00:1c.0: bridge window [mem 0xf4400000-0xf45fffff 64bit pref]
[ 0.246196] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.246200] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.246207] pci 0000:00:1c.1: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.246213] pci 0000:00:1c.1: bridge window [mem 0xf4000000-0xf41fffff 64bit pref]
[ 0.246221] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[ 0.246257] pci 0000:00:01.0: setting latency timer to 64
[ 0.246266] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.246274] pci 0000:00:1c.0: setting latency timer to 64
[ 0.246291] pci 0000:00:1c.1: setting latency timer to 64
[ 0.246300] pci 0000:00:1e.0: setting latency timer to 64
[ 0.246305] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.246309] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.246312] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.246316] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.246319] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xffffffff]
[ 0.246323] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.246326] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfeafffff]
[ 0.246330] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.246333] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.246337] pci_bus 0000:03: resource 1 [mem 0xf4200000-0xf43fffff]
[ 0.246340] pci_bus 0000:03: resource 2 [mem 0xf4400000-0xf45fffff 64bit pref]
[ 0.246344] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.246347] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.246351] pci_bus 0000:02: resource 2 [mem 0xf4000000-0xf41fffff 64bit pref]
[ 0.246355] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.246358] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.246361] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.246365] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.246368] pci_bus 0000:04: resource 8 [mem 0xe0000000-0xffffffff]
[ 0.246475] NET: Registered protocol family 2
[ 0.246737] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.249069] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.252706] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.253140] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.253145] TCP reno registered
[ 0.253175] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.253216] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.253423] NET: Registered protocol family 1
[ 0.253643] pci 0000:01:00.0: Boot video device
[ 0.253653] PCI: CLS 32 bytes, default 64
[ 0.253742] Unpacking initramfs...
[ 0.617201] Freeing initrd memory: 10148k freed
[ 0.622010] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.622018] Placing 64MB software IO TLB between ffff8800dbf8e000 - ffff8800dff8e000
[ 0.622021] software IO TLB at phys 0xdbf8e000 - 0xdff8e000
[ 0.622730] audit: initializing netlink socket (disabled)
[ 0.622751] type=2000 audit(1359581999.616:1): initialized
[ 0.642467] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.643572] VFS: Disk quotas dquot_6.5.2
[ 0.643623] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.643743] msgmni has been set to 7927
[ 0.644019] alg: No test for stdrng (krng)
[ 0.644073] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.644079] io scheduler noop registered
[ 0.644082] io scheduler deadline registered
[ 0.644108] io scheduler cfq registered (default)
[ 0.644249] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.644297] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.644383] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.644431] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.644521] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.644568] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.644717] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.644776] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.644779] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.645323] ERST: Table is not found!
[ 0.645326] GHES: HEST is not enabled!
[ 0.645427] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.665855] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.720735] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.721172] Linux agpgart interface v0.103
[ 0.721575] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.721990] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.722002] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.722255] mousedev: PS/2 mouse device common for all mice
[ 0.722330] rtc_cmos 00:03: RTC can wake from S4
[ 0.722492] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.722524] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.722547] cpuidle: using governor ladder
[ 0.722550] cpuidle: using governor menu
[ 0.722864] TCP cubic registered
[ 0.722933] NET: Registered protocol family 10
[ 0.723707] Mobile IPv6
[ 0.723712] NET: Registered protocol family 17
[ 0.723719] Registering the dns_resolver key type
[ 0.723962] PM: Hibernation image not present or could not be loaded.
[ 0.723980] registered taskstats version 1
[ 0.724776] rtc_cmos 00:03: setting system clock to 2013-01-30 21:40:00 UTC (1359582000)
[ 0.724854] Initializing network drop monitor service
[ 0.726805] Freeing unused kernel memory: 576k freed
[ 0.727017] Write protecting the kernel read-only data: 6144k
[ 0.730957] Freeing unused kernel memory: 660k freed
[ 0.735170] Freeing unused kernel memory: 680k freed
[ 0.755021] udevd[49]: starting version 175
[ 0.816415] usbcore: registered new interface driver usbfs
[ 0.816460] usbcore: registered new interface driver hub
[ 0.823841] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.823914] r8169 0000:02:00.0: setting latency timer to 64
[ 0.830576] usbcore: registered new device driver usb
[ 0.831334] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.831404] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.831409] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.831449] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.831495] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.831508] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.834354] SCSI subsystem initialized
[ 0.835402] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.835437] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9ffbc00
[ 0.838403] r8169 0000:02:00.0: irq 43 for MSI/MSI-X
[ 0.839128] r8169 0000:02:00.0: eth0: RTL8101e at 0xffffc90000640000, 90:e6:ba:c9:3f:e5, XID 94200000 IRQ 43
[ 0.839716] libata version 3.00 loaded.
[ 0.852746] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.856049] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.856100] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.856105] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.856109] usb usb1: Product: EHCI Host Controller
[ 0.856112] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 0.856115] usb usb1: SerialNumber: 0000:00:1d.7
[ 0.856350] hub 1-0:1.0: USB hub found
[ 0.856359] hub 1-0:1.0: 8 ports detected
[ 0.856789] ata_piix 0000:00:1f.1: version 2.13
[ 0.856875] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.876918] scsi0 : ata_piix
[ 0.883174] scsi1 : ata_piix
[ 0.885964] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.885970] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.886057] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.886131] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.886749] scsi2 : ata_piix
[ 0.887019] scsi3 : ata_piix
[ 0.889786] ata3: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xb880 irq 19
[ 0.889790] ata4: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq 19
[ 0.889853] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.889861] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.889881] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.889919] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c480
[ 0.889987] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.889992] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.889995] usb usb2: Product: UHCI Host Controller
[ 0.889998] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 0.890001] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.890305] hub 2-0:1.0: USB hub found
[ 0.890316] hub 2-0:1.0: 2 ports detected
[ 0.890455] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.890460] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.890473] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.890508] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c800
[ 0.890566] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.890571] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.890574] usb usb3: Product: UHCI Host Controller
[ 0.890577] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 0.890580] usb usb3: SerialNumber: 0000:00:1d.1
[ 0.890807] hub 3-0:1.0: USB hub found
[ 0.890817] hub 3-0:1.0: 2 ports detected
[ 0.890960] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.890965] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.890988] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.891041] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c880
[ 0.891104] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.891108] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.891112] usb usb4: Product: UHCI Host Controller
[ 0.891115] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 0.891118] usb usb4: SerialNumber: 0000:00:1d.2
[ 0.891332] hub 4-0:1.0: USB hub found
[ 0.891341] hub 4-0:1.0: 2 ports detected
[ 0.891465] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.891470] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.891482] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.891529] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000cc00
[ 0.891586] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.891591] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.891594] usb usb5: Product: UHCI Host Controller
[ 0.891597] usb usb5: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 0.891600] usb usb5: SerialNumber: 0000:00:1d.3
[ 0.891785] hub 5-0:1.0: USB hub found
[ 0.891794] hub 5-0:1.0: 2 ports detected
[ 1.056322] ata1.00: ATAPI: TSSTcorpCD/DVDW SH-S182D, SB04, max UDMA/33
[ 1.072188] ata1.00: configured for UDMA/33
[ 1.073636] scsi 0:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S182D SB04 PQ: 0 ANSI: 5
[ 1.086954] ata3.00: ATA-7: WDC WD1600AAJS-00PSA0, 05.06H05, max UDMA/133
[ 1.086961] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.100876] ata3.00: configured for UDMA/133
[ 1.101027] scsi 2:0:0:0: Direct-Access ATA WDC WD1600AAJS-0 05.0 PQ: 0 ANSI: 5
[ 1.109962] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.110061] sd 2:0:0:0: [sda] Write Protect is off
[ 1.110066] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.110107] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.126956] sda: sda1 sda2 < sda5 sda6 >
[ 1.127751] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.131225] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.131308] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.133681] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.133688] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.134089] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.524035] usb 2-1: new full-speed USB device number 2 using uhci_hcd
[ 1.620031] Refined TSC clocksource calibration: 2799.999 MHz.
[ 1.620040] Switching to clocksource tsc
[ 1.654091] PM: Starting manual resume from disk
[ 1.654097] PM: Hibernation image partition 8:5 present
[ 1.654100] PM: Looking for hibernation image.
[ 1.654422] PM: Image not found (code -22)
[ 1.654425] PM: Hibernation image not present or could not be loaded.
[ 1.682307] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.717987] usb 2-1: New USB device found, idVendor=0ac8, idProduct=305b
[ 1.717993] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.717997] usb 2-1: Product: PC Camera
[ 1.718000] usb 2-1: Manufacturer: Vimicro Corp.
[ 1.960027] usb 2-2: new full-speed USB device number 3 using uhci_hcd
[ 2.142988] usb 2-2: New USB device found, idVendor=046d, idProduct=c52e
[ 2.142994] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.142998] usb 2-2: Product: USB Receiver
[ 2.143001] usb 2-2: Manufacturer: Logitech
[ 3.046655] udevd[313]: starting version 175
[ 3.713138] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 3.713148] ACPI: Power Button [PWRB]
[ 3.713258] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 3.713264] ACPI: Power Button [PWRF]
[ 4.037055] intel_rng: FWH not detected
[ 4.064177] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 4.137884] iTCO_vendor_support: vendor-support=0
[ 4.147514] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 4.147662] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
[ 4.147763] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.157948] leds_ss4200: no LED devices found
[ 4.190198] [drm] Initialized drm 1.1.0 20060810
[ 4.268844] wmi: Mapper loaded
[ 4.466898] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 4.466937] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 4.578342] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input3
[ 4.578522] generic-usb 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-2/input0
[ 4.581760] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input4
[ 4.582499] generic-usb 0003:046D:C52E.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2/input1
[ 4.582806] usbcore: registered new interface driver usbhid
[ 4.582811] usbhid: USB HID core driver
[ 4.768310] Linux media interface: v0.10
[ 4.965993] Linux video capture interface: v2.00
[ 4.986676] gspca_main: v2.14.0 registered
[ 5.001184] gspca_main: zc3xx-2.14.0 probing 0ac8:305b
[ 5.254596] nvidia: module license 'NVIDIA' taints kernel.
[ 5.254602] Disabling lock debugging due to kernel taint
[ 5.551428] nvidia 0000:01:00.0: setting latency timer to 64
[ 5.551438] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none :o wns=io+mem
[ 5.551751] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 310.32 Mon Jan 14 14:41:13 PST 2013
[ 6.225112] input: zc3xx as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/input/input5
[ 6.226784] usbcore: registered new interface driver zc3xx
[ 7.033715] Adding 248828k swap on /dev/sda5. Priority:-1 extents:1 across:248828k
[ 7.057840] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 7.396063] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 7.530663] loop: module loaded
[ 8.409153] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 9.376587] RPC: Registered named UNIX socket transport module.
[ 9.376592] RPC: Registered udp transport module.
[ 9.376595] RPC: Registered tcp transport module.
[ 9.376599] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 9.408130] FS-Cache: Loaded
[ 9.440586] FS-Cache: Netfs 'nfs' registered for caching
[ 9.454037] Installing knfsd (copyright (C) 1996 [EMAIL="okir@monad.swb.de"]okir@monad.swb.de[/EMAIL]).
[ 12.809044] Bluetooth: Core ver 2.16
[ 12.809084] NET: Registered protocol family 31
[ 12.809088] Bluetooth: HCI device and connection manager initialized
[ 12.809092] Bluetooth: HCI socket layer initialized
[ 12.809096] Bluetooth: L2CAP socket layer initialized
[ 12.809362] Bluetooth: SCO socket layer initialized
[ 12.820936] Bluetooth: RFCOMM TTY layer initialized
[ 12.820947] Bluetooth: RFCOMM socket layer initialized
[ 12.820951] Bluetooth: RFCOMM ver 1.11
[ 12.996198] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 12.996204] Bluetooth: BNEP filters: protocol multicast
[ 13.220323] r8169 0000:02:00.0: eth0: link down
[ 13.220334] r8169 0000:02:00.0: eth0: link down
[ 13.221158] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.805673] r8169 0000:02:00.0: eth0: link up
[ 14.806270] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 15.736819] NVRM: GPU at 0000:01:00: GPU-b79dde26-9896-89a0-743b-e515fcd16fb1
[ 25.808009] eth0: no IPv6 routers present