Strona 1 z 3
Niedziałające połączenie bluetooth
: 31 października 2012, 21:11
autor: poogi
Witam!
Mam pewien problem, otóż nie działa mi w komputerze bluetooth.
Kod: Zaznacz cały
lsusb
Bus 003 Device 003: ID 0cf3:3002 Atheros Communications, Inc. AR3011 Bluetooth
Kod: Zaznacz cały
uname -a
Linux pogi 3.2.0-4-amd64 #1 SMP Debian 3.2.32-1 x86_64 GNU/Linux
Polecenie:
daje wynik:
a potem pojawia się znak zachęty. Szukałem trochę z pomocą Google, ale wszystkie próby zakończone fiaskiem.
Może miał ktoś podobny problem i byłby w stanie pomóc, dodam jeszcze, że przy uruchamianiu widnieje komunikat:
W logu dmsg znalazłem coś takiego:
Kod: Zaznacz cały
[ 7.733841] Bluetooth: Firmware load driver init. Version:1.0[ 7.747952] Bluetooth: Generic Bluetooth USB driver ver 0.6.1
[ 7.779801] Bluetooth: Error loading firmware
[ 7.779885] ath3k: probe of 3-1.3:1.0 failed with error -5
: 01 listopada 2012, 08:07
autor: ilin
Kod: Zaznacz cały
ilin@debian:~$ aptitude show firmware-atheros
Pakiet: firmware-atheros
Nowy: tak
Stan: niezainstalowany
Multi-Arch: foreign
Wersja: 0.36
Priorytet: opcjonalny
Sekcja: non-free/kernel
Opiekun: Debian Kernel Team <debian-kernel@lists.debian.org>
Architektura: all
Rozmiar rozpakowanego: 733 k
Sugeruje: initramfs-tools, linux-image
Udostępnia: firmware-atheros
Opis: Binary firmware for Atheros wireless cards
This package contains the binary firmware for USB wireless network and Bluetooth cards
supported by the ar9170, ath3k or ath9k_htc drivers.
Contents:
* Atheros AR3012 rev 1.2.0.1 patch (ar3k/AthrBT_0x01020001.dfu)
* Atheros AR3012 rev 1.2.2.0 patch (ar3k/AthrBT_0x01020200.dfu)
* Atheros AR3012 rev 1.2.0.1 config (ar3k/ramps_0x01020001_26.dfu)
* Atheros AR3012 rev 1.2.2.0 26 MHz config (ar3k/ramps_0x01020200_26.dfu)
* Atheros AR3012 rev 1.2.2.0 40 MHz config (ar3k/ramps_0x01020200_40.dfu)
* Atheros AR7010 rev 1.0 firmware (ar7010.fw)
* Atheros AR7010 rev 1.1 firmware (ar7010_1_1.fw)
* Atheros AR9170 firmware (ar9170.fw)
* Atheros AR9271 firmware (ar9271.fw)
* Atheros AR3011 firmware (ath3k-1.fw)
* Atheros AR7010 firmware, version 1.3 (htc_7010.fw)
* Atheros AR9271 firmware, version 1.3 (htc_9271.fw)
Strona internetowa: http://git.kernel.org/?p=linux/kernel/git/firmware/linux-firmware.git
: 01 listopada 2012, 10:53
autor: poogi
Tak tylko mój bluetooth to AR3011 którego ta paczka nie posiada.
: 01 listopada 2012, 11:16
autor: ilin
Mój wzrok już nie jest najlepszy ale chyba się nie mylę do logu co wkleiłem.
: 01 listopada 2012, 11:57
autor: poogi
Po zainstalowaniu nowy problem:
Kod: Zaznacz cały
Bluetooth: Can't change to loading configuration err
[ 12.837519] ath3k: probe of 3-1.3:1.0 failed with error -110
[ 12.837600] usbcore: registered new interface driver ath3k
[ 17.853823] Bluetooth: Can't change to loading configuration err
: 01 listopada 2012, 13:25
autor: ilin
Możesz tego loga dać więcej?
Może coś ważnego wyciąłeś co pomoże rozwiązać problem.
Pokaż jeszcze:
: 01 listopada 2012, 13:36
autor: poogi
Kod: Zaznacz cały
rc blueman 1.23-1 amd64 Graphical bluetooth managerii bluetooth 4.99-2 all Bluetooth support
ii bluez 4.99-2 amd64 Bluetooth tools and daemons
ii bluez-alsa:amd64 4.99-2 amd64 Bluetooth ALSA support
ii bluez-cups 4.99-2 amd64 Bluetooth printer driver for CUPS
ii bluez-dbg 4.99-2 amd64 Bluetooth tools and daemons (with debugging symbols)
ii bluez-firmware 1.2-3 all Firmware for Bluetooth devices
ii bluez-gstreamer 4.99-2 amd64 Bluetooth GStreamer support
ii bluez-tools 0.1.38+git662e-3 amd64 Set of tools to manage Bluetooth devices for linux
ii bluez-utils 4.99-2 all Transitional package
ii libbluetooth3:amd64 4.99-2 amd64 Library to use the BlueZ Linux Bluetooth stack
ii libbluetooth3-dbg 4.99-2 amd64 Library to use the BlueZ Linux Bluetooth stack with debugging symbols
: 01 listopada 2012, 13:48
autor: ilin
Daj na jakiegoś wkleja całe
bo po tym fragmenciku trudno coś sądzić.
: 01 listopada 2012, 13:52
autor: poogi
: 01 listopada 2012, 15:28
autor: ilin
Ty masz dalej:
Czy zrobiłeś restart komputera po zainstalowaniu tego pakietu?