Polskie Forum Użytkowników Debiana

Polski portal użytkowników dystrybucji Debian GNU/Linux, dyskusje, artykuły, nowości, blog, porady, pomoc.
https://www.debian.pl/

Mysz a4tech si

https://www.debian.pl/viewtopic.php?t=27113

Strona 1 z 2

Mysz a4tech się zamraża

: 22 czerwca 2012, 11:13
autor: tearu
Mam problem z myszą a4tech-a x7, problem dotyczy typu myszy gdyż posiadam różne x7-emki i występuje we wszystkich przypadkach, nie jest to także podyktowane dystrybucją linuxa, problem występował zarówno na ubuntu/mint jak i opensuse a także pod fedorą, oraz problem nie występuję po podłączeniu innych myszy nie tylko standardowych ale też z większą ilością przycisków, no i oczywiście nie ma też problemów pod windowsem.

Teraz do rzeczy, jakiś czas po uruchomieniu systemu mysz się zawiesza (przestaje reagować na ruch czy przyciski), klawiatura nadal funkcjonuje a także jestem w stanie podłączyć dowolną inną posiadaną mysz i w spokoju z niej korzystać, natomiast przełożenie "zatrzymanej" myszy do innego portu usb nie naprawia problemu.
Dodatkowo np. pod ubuntu 12LTS niemalże natychmiastowo występuję ten problem, trochę wolniej pod mintem 12 i 13
pod najnowszym mintem debian edition problem niemalże nie występuję, a sam debian tj. mint 13 ;)

Teraz pytanie brzmi czy wiecie jak naprawić tego typu problem? Czy można i jak sprawdzić stan urządzeń wejścia pod debianem, i jeszcze co mogło by mi pomóc w diagnozowaniu tego typu problemów?

Proszę o pewną wyrozumiałość gdyż póki co operowałem na "idiot-proof" dystrybucjach linuxa gdzie mogłem wszystko wyklikać, które teą wymieniłem powyżej xD

: 22 czerwca 2012, 13:31
autor: Rafal_F
Nie wiem ile tych modeli jest, ale ja mam model Oscar X747 Brown Fire i nie potwierdzam problemu. Jeżeli w poprzedniej sesji X wystąpił problem to wklej tu zawartość pliku:

Kod: Zaznacz cały

/var/log/Xorg.0.log.old
Lub zaczekaj na wystąpienie problemu i wklej zawartość pliku:

Kod: Zaznacz cały

/var/log/Xorg.0.log

: 22 czerwca 2012, 13:36
autor: diabolic3
Mam tą samą mysz i ten sam problem. U mnie rozwiązaniem problemu było podłączenie jej przez śledzia usb na pci.

: 22 czerwca 2012, 14:14
autor: tearu
Szczerze myślałem o nieco innym rozwiązaniu niż śledź na usb pod PCI, chyba że faktycznie nie będzie innego wyjścia.
Osobiści myślałem że ma to związek z tym, że mysz jest jednocześnie rozpoznawana jako mysz i joystick.
Pod mintem działało odłączenie myszy przed rozruchem PC i podłączenie po zalogowaniu, ale nie na debianie xD

Po powrocie do domu skopiuje log z Xorg może to coś rozjaśni.

: 22 czerwca 2012, 17:53
autor: Bastian
Ja mam tą mysz i nie mam takiego problemu. /var/log/messages nic nie mówi?

: 24 czerwca 2012, 17:27
autor: diabolic3
Podaj model twojej płyty głównej, a na innych komputerach z Linuksem ten sam problem występuje?

: 25 czerwca 2012, 18:25
autor: tearu
No cóż, jak na złość mycha chodzi jak szalona już ładnych kilka godzin i rzecz jasna nic nie robiłem xD Więc napiszę jak coś się w końcu stanie.Model płyty podam jak zrobie upgrade distra do wersji testowej....... a chwile to jeszcze potrwa

: 25 czerwca 2012, 18:50
autor: diabolic3
http://debian.linux.pl/threads/21598-My ... mu-Squeeze w tym temacie opisywałem moje zmagania z tą myszką, możliwe że w razie czego coś ci to pomoże

: 26 czerwca 2012, 02:22
autor: tearu

Kod: Zaznacz cały

(II) config/udev: Adding input device A4TECH USB Device (/dev/input/event2)
(**) A4TECH USB Device: Applying InputClass "evdev keyboard catchall"
(**) A4TECH USB Device: always reports core events
(**) A4TECH USB Device: Device: "/dev/input/event2"
(II) A4TECH USB Device: Found 1 mouse buttons
(II) A4TECH USB Device: Found scroll wheel(s)
(II) A4TECH USB Device: Found relative axes
(II) A4TECH USB Device: Found absolute axes
(II) A4TECH USB Device: Found x and y absolute axes
(II) A4TECH USB Device: Found keys
(II) A4TECH USB Device: Configuring as mouse
(II) A4TECH USB Device: Configuring as keyboard
(**) A4TECH USB Device: YAxisMapping: buttons 4 and 5
(**) A4TECH USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "A4TECH USB Device" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(EE) A4TECH USB Device: failed to initialize for relative axes.
(WW) Device 'A4TECH USB Device' has 37 axes, only using first 36.
(II) A4TECH USB Device: initialized for absolute axes.
(II) config/udev: Adding input device A4TECH USB Device (/dev/input/js0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device A4TECH USB Device (/dev/input/event3)
(**) A4TECH USB Device: Applying InputClass "evdev pointer catchall"
(**) A4TECH USB Device: always reports core events
(**) A4TECH USB Device: Device: "/dev/input/event3"
(II) A4TECH USB Device: Found 20 mouse buttons
(II) A4TECH USB Device: Found scroll wheel(s)
(II) A4TECH USB Device: Found relative axes
(II) A4TECH USB Device: Found x and y relative axes
(II) A4TECH USB Device: Configuring as mouse
(**) A4TECH USB Device: YAxisMapping: buttons 4 and 5
(**) A4TECH USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "A4TECH USB Device" (type: MOUSE)
(II) A4TECH USB Device: initialized for relative axes.
(II) config/udev: Adding input device A4TECH USB Device (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event1)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) config/udev: Adding input device PC Speaker (/dev/input/event6)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event0)
(**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall"
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
Taki wycinek loga z Xorg. Żadnej myszy którą miałoby wykrywać jako macintosha nie posiadam podłączałem później labteka tylko ale wykryło go prawidłowo

Kod: Zaznacz cały

(II) config/udev: Adding input device Device Labtec Wireless Laser Mouse (/dev/input/event7)
(**) Device Labtec Wireless Laser Mouse: Applying InputClass "evdev pointer catchall"
(**) Device Labtec Wireless Laser Mouse: Applying InputClass "evdev keyboard catchall"
(**) Device Labtec Wireless Laser Mouse: always reports core events
(**) Device Labtec Wireless Laser Mouse: Device: "/dev/input/event7"
(II) Device Labtec Wireless Laser Mouse: Found 9 mouse buttons
(II) Device Labtec Wireless Laser Mouse: Found scroll wheel(s)
(II) Device Labtec Wireless Laser Mouse: Found relative axes
(II) Device Labtec Wireless Laser Mouse: Found x and y relative axes
(II) Device Labtec Wireless Laser Mouse: Found keys
(II) Device Labtec Wireless Laser Mouse: Configuring as mouse
(II) Device Labtec Wireless Laser Mouse: Configuring as keyboard
(**) Device Labtec Wireless Laser Mouse: YAxisMapping: buttons 4 and 5
(**) Device Labtec Wireless Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Device Labtec Wireless Laser Mouse" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) Device Labtec Wireless Laser Mouse: initialized for relative axes.
(II) config/udev: Adding input device Device Labtec Wireless Laser Mouse (/dev/input/mouse2)
(II) No input driver/identifier specified (ignoring)
w /var/messeges imo nie ma nic co by dla odmiany mogło na problem jakkolwiek wskazywać, ale zamieszczę bo się jeszcze nie znam xD

Kod: Zaznacz cały

Jun 24 10:48:16 Tearu-PC rsyslogd: [origin software="rsyslogd" swVersion="4.6.4" x-pid="1202" x-info="http://www.rsyslog.com"] rsyslogd was HUPed, type 'lightweight'.
Jun 24 10:51:32 Tearu-PC shutdown[2241]: shutting down for system reboot
Jun 24 10:51:35 Tearu-PC kernel: Kernel logging (proc) stopped.
Jun 24 10:51:35 Tearu-PC rsyslogd: [origin software="rsyslogd" swVersion="4.6.4" x-pid="1202" x-info="http://www.rsyslog.com"] exiting on signal 15.
Jun 25 17:46:22 Tearu-PC kernel: imklog 4.6.4, log source = /proc/kmsg started.
Jun 25 17:46:22 Tearu-PC rsyslogd: [origin software="rsyslogd" swVersion="4.6.4" x-pid="1337" x-info="http://www.rsyslog.com"] (re)start
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] Initializing cgroup subsys cpuset
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] Initializing cgroup subsys cpu
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-45) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun May 6 04:00:17 UTC 2012
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=bdc9f751-3691-45f6-9a8b-8c945028374d ro quiet
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] KERNEL supported cpus:
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000]   Intel GenuineIntel
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000]   AMD AuthenticAMD
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000]   Centaur CentaurHauls
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] BIOS-provided physical RAM map:
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000]  BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000]  BIOS-e820: 00000000000e3000 - 0000000000100000 (reserved)
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000]  BIOS-e820: 0000000000100000 - 00000000cffa0000 (usable)
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000]  BIOS-e820: 00000000cffa0000 - 00000000cffae000 (ACPI data)
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000]  BIOS-e820: 00000000cffae000 - 00000000cffe0000 (ACPI NVS)
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000]  BIOS-e820: 00000000cffe0000 - 00000000cffee000 (reserved)
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000]  BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000]  BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] DMI present.
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] last_pfn = 0xcffa0 max_arch_pfn = 0x400000000
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] Using GB pages for direct mapping
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] init_memory_mapping: 0000000000000000-00000000cffa0000
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] init_memory_mapping: 0000000100000000-0000000130000000
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] RAMDISK: 3770e000 - 37fef416
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] ACPI: RSDP 00000000000fb750 00014 (v00 ACPIAM)
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] ACPI: RSDT 00000000cffa0000 00048 (v01 051310 RSDT1641 20100513 MSFT 00000097)
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] ACPI: FACP 00000000cffa0200 00084 (v01 051310 FACP1641 20100513 MSFT 00000097)
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] ACPI: DSDT 00000000cffa0460 0AAE5 (v01  A1093 A1093000 00000000 INTL 20060113)
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] ACPI: FACS 00000000cffae000 00040
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] ACPI: APIC 00000000cffa0390 00090 (v01 051310 APIC1641 20100513 MSFT 00000097)
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] ACPI: MCFG 00000000cffa0420 0003C (v01 051310 OEMMCFG  20100513 MSFT 00000097)
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] ACPI: OEMB 00000000cffae040 00072 (v01 051310 OEMB1641 20100513 MSFT 00000097)
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] ACPI: SRAT 00000000cffaaf50 000D8 (v03 AMD    FAM_F_10 00000002 AMD  00000001)
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] ACPI: HPET 00000000cffab030 00038 (v01 051310 OEMHPET0 20100513 MSFT 00000097)
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] ACPI: INFO 00000000cffae0c0 00124 (v01 051310 AMDINFO  20100513 MSFT 00000097)
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] ACPI: NVHD 00000000cffae1f0 00284 (v01 051310  NVHDCP  20100513 MSFT 00000097)
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] ACPI: SSDT 00000000cffab070 003FC (v01 A M I  POWERNOW 00000001 AMD  00000001)
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] SRAT: PXM 0 -> APIC 2 -> Node 0
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] SRAT: Node 0 PXM 0 0-a0000
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] SRAT: Node 0 PXM 0 100000-d0000000
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] SRAT: Node 0 PXM 0 100000000-130000000
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] Bootmem setup node 0 0000000000000000-0000000130000000
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000]   NODE_DATA [0000000000015640 - 000000000001d63f]
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000]   bootmap [000000000001e000 -  0000000000043fff] pages 26
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] (9 early reservations) ==> bootmem [0000000000 - 0130000000]
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000]   #2 [0001000000 - 00016d95c4]    TEXT DATA BSS ==> [0001000000 - 00016d95c4]
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000]   #3 [003770e000 - 0037fef416]          RAMDISK ==> [003770e000 - 0037fef416]
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000]   #4 [000009ec00 - 0000100000]    BIOS reserved ==> [000009ec00 - 0000100000]
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000]   #5 [00016da000 - 00016da290]              BRK ==> [00016da000 - 00016da290]
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000]   #6 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000]   #7 [0000012000 - 0000013000]          PGTABLE ==> [0000012000 - 0000013000]
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000]   #8 [0000013000 - 0000015640]       MEMNODEMAP ==> [0000013000 - 0000015640]
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] Zone PFN ranges:
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000]   DMA      0x00000010 -> 0x00001000
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000]   DMA32    0x00001000 -> 0x00100000
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000]   Normal   0x00100000 -> 0x00130000
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] Movable zone start PFN for each node
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] early_node_map[3] active PFN ranges
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000]     0: 0x00000010 -> 0x0000009e
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000]     0: 0x00000100 -> 0x000cffa0
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000]     0: 0x00100000 -> 0x00130000
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] ACPI: PM-Timer IO Port: 0x508
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0])
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] IOAPIC[0]: apic_id 3, version 17, address 0xfec00000, GSI 0-23
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] Using ACPI (MADT) for SMP configuration information
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] SMP: Allowing 6 CPUs, 3 hotplug CPUs
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e3000
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] PM: Registered nosave memory: 00000000000e3000 - 0000000000100000
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] PM: Registered nosave memory: 00000000cffa0000 - 00000000cffae000
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] PM: Registered nosave memory: 00000000cffae000 - 00000000cffe0000
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] PM: Registered nosave memory: 00000000cffe0000 - 00000000cffee000
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] PM: Registered nosave memory: 00000000cffee000 - 00000000cfff0000
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] PM: Registered nosave memory: 00000000cfff0000 - 00000000d0000000
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fec00000
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000fff00000
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ec00000)
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] Booting paravirtualized kernel on bare hardware
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:6 nr_node_ids:1
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] PERCPU: Embedded 30 pages/cpu @ffff880005400000 s90328 r8192 d24360 u262144
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] pcpu-alloc: s90328 r8192 d24360 u262144 alloc=1*2097152
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - - 
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1031237
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] Policy zone: Normal
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=bdc9f751-3691-45f6-9a8b-8c945028374d ro quiet
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] Initializing CPU#0
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] Checking aperture...
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] No AGP bridge found
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] Node 0: aperture @ 9536000000 size 32 MB
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] Aperture beyond 4GB. Ignoring.
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] Your BIOS doesn't leave a aperture memory hole
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] Please enable the IOMMU option in the BIOS setup
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] This costs you 64 MB of RAM
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] Memory: 4051268k/4980736k available (3083k kernel code, 787272k absent, 142196k reserved, 2048k data, 592k init)
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] Hierarchical RCU implementation.
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] NR_IRQS:4352 nr_irqs:456
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] Console: colour VGA+ 80x25
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] console [tty0] enabled
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] Fast TSC calibration using PIT
Jun 25 17:46:22 Tearu-PC kernel: [    0.000000] Detected 2414.919 MHz processor.
Jun 25 17:46:22 Tearu-PC kernel: [    0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4829.83 BogoMIPS (lpj=9659664)
Jun 25 17:46:22 Tearu-PC kernel: [    0.008021] Security Framework initialized
Jun 25 17:46:22 Tearu-PC kernel: [    0.008026] SELinux:  Disabled at boot.
Jun 25 17:46:22 Tearu-PC kernel: [    0.008292] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Jun 25 17:46:22 Tearu-PC kernel: [    0.013106] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Jun 25 17:46:22 Tearu-PC kernel: [    0.013709] Mount-cache hash table entries: 256
Jun 25 17:46:22 Tearu-PC kernel: [    0.013823] Initializing cgroup subsys ns
Jun 25 17:46:22 Tearu-PC kernel: [    0.013826] Initializing cgroup subsys cpuacct
Jun 25 17:46:22 Tearu-PC kernel: [    0.013830] Initializing cgroup subsys devices
Jun 25 17:46:22 Tearu-PC kernel: [    0.013832] Initializing cgroup subsys freezer
Jun 25 17:46:22 Tearu-PC kernel: [    0.013833] Initializing cgroup subsys net_cls
Jun 25 17:46:22 Tearu-PC kernel: [    0.013851] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Jun 25 17:46:22 Tearu-PC kernel: [    0.013853] CPU: L2 Cache: 512K (64 bytes/line)
Jun 25 17:46:22 Tearu-PC kernel: [    0.013855] CPU 0/0x0 -> Node 0
Jun 25 17:46:22 Tearu-PC kernel: [    0.013869] CPU: Physical Processor ID: 0
Jun 25 17:46:22 Tearu-PC kernel: [    0.013871] CPU: Processor Core ID: 0
Jun 25 17:46:22 Tearu-PC kernel: [    0.013873] mce: CPU supports 6 MCE banks
Jun 25 17:46:22 Tearu-PC kernel: [    0.013882] Performance Events: AMD PMU driver.
Jun 25 17:46:22 Tearu-PC kernel: [    0.013885] ... version:                0
Jun 25 17:46:22 Tearu-PC kernel: [    0.013887] ... bit width:              48
Jun 25 17:46:22 Tearu-PC kernel: [    0.013888] ... generic registers:      4
Jun 25 17:46:22 Tearu-PC kernel: [    0.013889] ... value mask:             0000ffffffffffff
Jun 25 17:46:22 Tearu-PC kernel: [    0.013891] ... max period:             00007fffffffffff
Jun 25 17:46:22 Tearu-PC kernel: [    0.013892] ... fixed-purpose events:   0
Jun 25 17:46:22 Tearu-PC kernel: [    0.013893] ... event mask:             000000000000000f
Jun 25 17:46:22 Tearu-PC kernel: [    0.014540] ACPI: Core revision 20090903
Jun 25 17:46:22 Tearu-PC kernel: [    0.024869] Setting APIC routing to flat
Jun 25 17:46:22 Tearu-PC kernel: [    0.025343] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Jun 25 17:46:22 Tearu-PC kernel: [    0.065042] CPU0: AMD Phenom(tm) 8450 Triple-Core Processor stepping 03
Jun 25 17:46:22 Tearu-PC kernel: [    0.068001] Booting processor 1 APIC 0x1 ip 0x6000
Jun 25 17:46:22 Tearu-PC kernel: [    0.012000] Initializing CPU#1
Jun 25 17:46:22 Tearu-PC kernel: [    0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Jun 25 17:46:22 Tearu-PC kernel: [    0.012000] CPU: L2 Cache: 512K (64 bytes/line)
Jun 25 17:46:22 Tearu-PC kernel: [    0.012000] CPU 1/0x1 -> Node 0
Jun 25 17:46:22 Tearu-PC kernel: [    0.012000] CPU: Physical Processor ID: 0
Jun 25 17:46:22 Tearu-PC kernel: [    0.012000] CPU: Processor Core ID: 1
Jun 25 17:46:22 Tearu-PC kernel: [    0.152117] CPU1: AMD Phenom(tm) 8450 Triple-Core Processor stepping 03
Jun 25 17:46:22 Tearu-PC kernel: [    0.152128] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Jun 25 17:46:22 Tearu-PC kernel: [    0.156059] Booting processor 2 APIC 0x2 ip 0x6000
Jun 25 17:46:22 Tearu-PC kernel: [    0.012000] Initializing CPU#2
Jun 25 17:46:22 Tearu-PC kernel: [    0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Jun 25 17:46:22 Tearu-PC kernel: [    0.012000] CPU: L2 Cache: 512K (64 bytes/line)
Jun 25 17:46:22 Tearu-PC kernel: [    0.012000] CPU 2/0x2 -> Node 0
Jun 25 17:46:22 Tearu-PC kernel: [    0.012000] CPU: Physical Processor ID: 0
Jun 25 17:46:22 Tearu-PC kernel: [    0.012000] CPU: Processor Core ID: 2
Jun 25 17:46:22 Tearu-PC kernel: [    0.244070] CPU2: AMD Phenom(tm) 8450 Triple-Core Processor stepping 03
Jun 25 17:46:22 Tearu-PC kernel: [    0.244079] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Jun 25 17:46:22 Tearu-PC kernel: [    0.248012] Brought up 3 CPUs
Jun 25 17:46:22 Tearu-PC kernel: [    0.248014] Total of 3 processors activated (14490.07 BogoMIPS).
Jun 25 17:46:22 Tearu-PC kernel: [    0.249070] devtmpfs: initialized
Jun 25 17:46:22 Tearu-PC kernel: [    0.252384] regulator: core version 0.5
Jun 25 17:46:22 Tearu-PC kernel: [    0.252384] NET: Registered protocol family 16
Jun 25 17:46:22 Tearu-PC kernel: [    0.252384] TOM: 00000000d0000000 aka 3328M
Jun 25 17:46:22 Tearu-PC kernel: [    0.252384] TOM2: 0000000130000000 aka 4864M
Jun 25 17:46:22 Tearu-PC kernel: [    0.252384] ACPI: bus type pci registered
Jun 25 17:46:22 Tearu-PC kernel: [    0.252384] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Jun 25 17:46:22 Tearu-PC kernel: [    0.252384] PCI: Not using MMCONFIG.
Jun 25 17:46:22 Tearu-PC kernel: [    0.252384] PCI: Using configuration type 1 for base access
Jun 25 17:46:22 Tearu-PC kernel: [    0.252384] PCI: Using configuration type 1 for extended access
Jun 25 17:46:22 Tearu-PC kernel: [    0.252500] bio: create slab <bio-0> at 0
Jun 25 17:46:22 Tearu-PC kernel: [    0.261306] ACPI: Executed 1 blocks of module-level executable AML code
Jun 25 17:46:22 Tearu-PC kernel: [    0.270943] ACPI: Interpreter enabled
Jun 25 17:46:22 Tearu-PC kernel: [    0.270946] ACPI: (supports S0 S1 S3 S4 S5)
Jun 25 17:46:22 Tearu-PC kernel: [    0.270968] ACPI: Using IOAPIC for interrupt routing
Jun 25 17:46:22 Tearu-PC kernel: [    0.271027] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Jun 25 17:46:22 Tearu-PC kernel: [    0.280467] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
Jun 25 17:46:22 Tearu-PC kernel: [    0.288797] PCI: Using MMCONFIG at e0000000 - efffffff
Jun 25 17:46:22 Tearu-PC kernel: [    0.306274] ACPI Warning: Incorrect checksum in table [OEMB] - 5B, should be 4E (20090903/tbutils-314)
Jun 25 17:46:22 Tearu-PC kernel: [    0.306518] ACPI: No dock devices found.
Jun 25 17:46:22 Tearu-PC kernel: [    0.306952] ACPI: PCI Root Bridge [PCI0] (0000:00)
Jun 25 17:46:22 Tearu-PC kernel: [    0.307327] pci 0000:00:01.1: PME# supported from D3hot D3cold
Jun 25 17:46:22 Tearu-PC kernel: [    0.307332] pci 0000:00:01.1: PME# disabled
Jun 25 17:46:22 Tearu-PC kernel: [    0.307546] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
Jun 25 17:46:22 Tearu-PC kernel: [    0.307549] pci 0000:00:02.0: PME# disabled
Jun 25 17:46:22 Tearu-PC kernel: [    0.307606] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
Jun 25 17:46:22 Tearu-PC kernel: [    0.307609] pci 0000:00:02.1: PME# disabled
Jun 25 17:46:22 Tearu-PC kernel: [    0.307663] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
Jun 25 17:46:22 Tearu-PC kernel: [    0.307666] pci 0000:00:04.0: PME# disabled
Jun 25 17:46:22 Tearu-PC kernel: [    0.307723] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
Jun 25 17:46:22 Tearu-PC kernel: [    0.307725] pci 0000:00:04.1: PME# disabled
Jun 25 17:46:22 Tearu-PC kernel: [    0.307934] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
Jun 25 17:46:22 Tearu-PC kernel: [    0.307938] pci 0000:00:0a.0: PME# disabled
Jun 25 17:46:22 Tearu-PC kernel: [    0.308243] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
Jun 25 17:46:22 Tearu-PC kernel: [    0.308250] pci 0000:00:10.0: PME# disabled
Jun 25 17:46:22 Tearu-PC kernel: [    0.308581] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
Jun 25 17:46:22 Tearu-PC kernel: [    0.308589] pci 0000:00:12.0: PME# disabled
Jun 25 17:46:22 Tearu-PC kernel: [    0.308797] pci 0000:00:08.0: transparent bridge
Jun 25 17:46:22 Tearu-PC kernel: [    0.334042] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
Jun 25 17:46:22 Tearu-PC kernel: [    0.334311] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *15
Jun 25 17:46:22 Tearu-PC kernel: [    0.334575] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
Jun 25 17:46:22 Tearu-PC kernel: [    0.334842] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
Jun 25 17:46:22 Tearu-PC kernel: [    0.335111] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *10
Jun 25 17:46:22 Tearu-PC kernel: [    0.335379] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *10
Jun 25 17:46:22 Tearu-PC kernel: [    0.335643] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled.
Jun 25 17:46:22 Tearu-PC kernel: [    0.335909] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled.
Jun 25 17:46:22 Tearu-PC kernel: [    0.336183] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled.
Jun 25 17:46:22 Tearu-PC kernel: [    0.336460] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled.
Jun 25 17:46:22 Tearu-PC kernel: [    0.336736] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled.
Jun 25 17:46:22 Tearu-PC kernel: [    0.337013] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.
Jun 25 17:46:22 Tearu-PC kernel: [    0.337293] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *11
Jun 25 17:46:22 Tearu-PC kernel: [    0.337568] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.
Jun 25 17:46:22 Tearu-PC kernel: [    0.337844] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.
Jun 25 17:46:22 Tearu-PC kernel: [    0.338121] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.
Jun 25 17:46:22 Tearu-PC kernel: [    0.338397] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *0, disabled.
Jun 25 17:46:22 Tearu-PC kernel: [    0.338673] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.
Jun 25 17:46:22 Tearu-PC kernel: [    0.338950] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
Jun 25 17:46:22 Tearu-PC kernel: [    0.339227] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
Jun 25 17:46:22 Tearu-PC kernel: [    0.339502] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *0, disabled.
Jun 25 17:46:22 Tearu-PC kernel: [    0.339779] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
Jun 25 17:46:22 Tearu-PC kernel: [    0.340061] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
Jun 25 17:46:22 Tearu-PC kernel: [    0.340336] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
Jun 25 17:46:22 Tearu-PC kernel: [    0.340613] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.
Jun 25 17:46:22 Tearu-PC kernel: [    0.340893] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
Jun 25 17:46:22 Tearu-PC kernel: [    0.341169] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
Jun 25 17:46:22 Tearu-PC kernel: [    0.341447] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
Jun 25 17:46:22 Tearu-PC kernel: [    0.341726] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
Jun 25 17:46:22 Tearu-PC kernel: [    0.342007] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
Jun 25 17:46:22 Tearu-PC kernel: [    0.342284] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
Jun 25 17:46:22 Tearu-PC kernel: [    0.342561] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
Jun 25 17:46:22 Tearu-PC kernel: [    0.342838] ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0, disabled.
Jun 25 17:46:22 Tearu-PC kernel: [    0.343114] ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0, disabled.
Jun 25 17:46:22 Tearu-PC kernel: [    0.343391] ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0, disabled.
Jun 25 17:46:22 Tearu-PC kernel: [    0.343668] ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0, disabled.
Jun 25 17:46:22 Tearu-PC kernel: [    0.343949] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *15
Jun 25 17:46:22 Tearu-PC kernel: [    0.344229] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
Jun 25 17:46:22 Tearu-PC kernel: [    0.344497] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11
Jun 25 17:46:22 Tearu-PC kernel: [    0.344763] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled.
Jun 25 17:46:22 Tearu-PC kernel: [    0.345029] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *0, disabled.
Jun 25 17:46:22 Tearu-PC kernel: [    0.345301] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
Jun 25 17:46:22 Tearu-PC kernel: [    0.345570] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *15
Jun 25 17:46:22 Tearu-PC kernel: [    0.345840] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
Jun 25 17:46:22 Tearu-PC kernel: [    0.346152] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
Jun 25 17:46:22 Tearu-PC kernel: [    0.346423] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *10
Jun 25 17:46:22 Tearu-PC kernel: [    0.346693] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *10
Jun 25 17:46:22 Tearu-PC kernel: [    0.346812] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
Jun 25 17:46:22 Tearu-PC kernel: [    0.346815] vgaarb: loaded
Jun 25 17:46:22 Tearu-PC kernel: [    0.346829] PCI: Using ACPI for IRQ routing
Jun 25 17:46:22 Tearu-PC kernel: [    0.346829] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Jun 25 17:46:22 Tearu-PC kernel: [    0.346829] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
Jun 25 17:46:22 Tearu-PC kernel: [    0.346829] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
Jun 25 17:46:22 Tearu-PC kernel: [    0.356036] Switching to clocksource tsc
Jun 25 17:46:22 Tearu-PC kernel: [    0.356824] pnp: PnP ACPI init
Jun 25 17:46:22 Tearu-PC kernel: [    0.356836] ACPI: bus type pnp registered
Jun 25 17:46:22 Tearu-PC kernel: [    0.360706] pnp 00:06: io resource (0x900-0x97f) overlaps 0000:00:01.0 BAR 0 (0x900-0x9ff), disabling
Jun 25 17:46:22 Tearu-PC kernel: [    0.360709] pnp 00:06: io resource (0x980-0x9ff) overlaps 0000:00:01.0 BAR 0 (0x900-0x9ff), disabling
Jun 25 17:46:22 Tearu-PC kernel: [    0.366627] pnp: PnP ACPI: found 15 devices
Jun 25 17:46:22 Tearu-PC kernel: [    0.366629] ACPI: ACPI bus type pnp unregistered
Jun 25 17:46:22 Tearu-PC kernel: [    0.366640] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
Jun 25 17:46:22 Tearu-PC kernel: [    0.366642] system 00:06: ioport range 0x800-0x80f has been reserved
Jun 25 17:46:22 Tearu-PC kernel: [    0.366645] system 00:06: ioport range 0x500-0x57f has been reserved
Jun 25 17:46:22 Tearu-PC kernel: [    0.366647] system 00:06: ioport range 0x580-0x5ff has been reserved
Jun 25 17:46:22 Tearu-PC kernel: [    0.366649] system 00:06: ioport range 0x800-0x87f could not be reserved
Jun 25 17:46:22 Tearu-PC kernel: [    0.366652] system 00:06: ioport range 0x880-0x8ff has been reserved
Jun 25 17:46:22 Tearu-PC kernel: [    0.366654] system 00:06: ioport range 0xd00-0xd7f has been reserved
Jun 25 17:46:22 Tearu-PC kernel: [    0.366657] system 00:06: ioport range 0xd80-0xdff has been reserved
Jun 25 17:46:22 Tearu-PC kernel: [    0.366660] system 00:06: iomem range 0xfed04000-0xfed04fff has been reserved
Jun 25 17:46:22 Tearu-PC kernel: [    0.366663] system 00:06: iomem range 0xfee01000-0xfeefffff has been reserved
Jun 25 17:46:22 Tearu-PC kernel: [    0.366668] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
Jun 25 17:46:22 Tearu-PC kernel: [    0.366671] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
Jun 25 17:46:22 Tearu-PC kernel: [    0.366677] system 00:0b: ioport range 0x230-0x23f has been reserved
Jun 25 17:46:22 Tearu-PC kernel: [    0.366680] system 00:0b: ioport range 0x290-0x29f has been reserved
Jun 25 17:46:22 Tearu-PC kernel: [    0.366684] system 00:0b: ioport range 0xa00-0xa0f has been reserved
Jun 25 17:46:22 Tearu-PC kernel: [    0.366686] system 00:0b: ioport range 0xa10-0xa1f has been reserved
Jun 25 17:46:22 Tearu-PC kernel: [    0.366690] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
Jun 25 17:46:22 Tearu-PC kernel: [    0.366695] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
Jun 25 17:46:22 Tearu-PC kernel: [    0.366697] system 00:0e: iomem range 0xc0000-0xcffff could not be reserved
Jun 25 17:46:22 Tearu-PC kernel: [    0.366702] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
Jun 25 17:46:22 Tearu-PC kernel: [    0.366705] system 00:0e: iomem range 0x100000-0xcfffffff could not be reserved
Jun 25 17:46:22 Tearu-PC kernel: [    0.366708] system 00:0e: iomem range 0xfec00000-0xffffffff could not be reserved
Jun 25 17:46:22 Tearu-PC kernel: [    0.371427] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01
Jun 25 17:46:22 Tearu-PC kernel: [    0.371430] pci 0000:00:08.0:   IO window: 0xd000-0xdfff
Jun 25 17:46:22 Tearu-PC kernel: [    0.371433] pci 0000:00:08.0:   MEM window: disabled
Jun 25 17:46:22 Tearu-PC kernel: [    0.371435] pci 0000:00:08.0:   PREFETCH window: disabled
Jun 25 17:46:22 Tearu-PC kernel: [    0.371439] pci 0000:00:10.0: PCI bridge, secondary bus 0000:02
Jun 25 17:46:22 Tearu-PC kernel: [    0.371444] pci 0000:00:10.0:   IO window: 0xe000-0xefff
Jun 25 17:46:22 Tearu-PC kernel: [    0.371453] pci 0000:00:10.0:   MEM window: 0xfeb00000-0xfebfffff
Jun 25 17:46:22 Tearu-PC kernel: [    0.371461] pci 0000:00:10.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
Jun 25 17:46:22 Tearu-PC kernel: [    0.371473] pci 0000:00:12.0: PCI bridge, secondary bus 0000:03
Jun 25 17:46:22 Tearu-PC kernel: [    0.371475] pci 0000:00:12.0:   IO window: disabled
Jun 25 17:46:22 Tearu-PC kernel: [    0.371484] pci 0000:00:12.0:   MEM window: disabled
Jun 25 17:46:22 Tearu-PC kernel: [    0.371491] pci 0000:00:12.0:   PREFETCH window: disabled
Jun 25 17:46:22 Tearu-PC kernel: [    0.371918] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19
Jun 25 17:46:22 Tearu-PC kernel: [    0.371933] pci 0000:00:10.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19
Jun 25 17:46:22 Tearu-PC kernel: [    0.372309] ACPI: PCI Interrupt Link [LN2A] enabled at IRQ 18
Jun 25 17:46:22 Tearu-PC kernel: [    0.372322] pci 0000:00:12.0: PCI INT A -> Link[LN2A] -> GSI 18 (level, low) -> IRQ 18
Jun 25 17:46:22 Tearu-PC kernel: [    0.372376] NET: Registered protocol family 2
Jun 25 17:46:22 Tearu-PC kernel: [    0.372534] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
Jun 25 17:46:22 Tearu-PC kernel: [    0.373746] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
Jun 25 17:46:22 Tearu-PC kernel: [    0.376402] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Jun 25 17:46:22 Tearu-PC kernel: [    0.376732] TCP: Hash tables configured (established 524288 bind 65536)
Jun 25 17:46:22 Tearu-PC kernel: [    0.376734] TCP reno registered
Jun 25 17:46:22 Tearu-PC kernel: [    0.376830] NET: Registered protocol family 1
Jun 25 17:46:22 Tearu-PC kernel: [    0.377312] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
Jun 25 17:46:22 Tearu-PC kernel: [    0.377328] pci 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
Jun 25 17:46:22 Tearu-PC kernel: [    0.495958] pci 0000:00:02.0: PCI INT A disabled
Jun 25 17:46:22 Tearu-PC kernel: [    0.496324] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
Jun 25 17:46:22 Tearu-PC kernel: [    0.496334] pci 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
Jun 25 17:46:22 Tearu-PC kernel: [    0.496355] pci 0000:00:02.1: PCI INT B disabled
Jun 25 17:46:22 Tearu-PC kernel: [    0.496715] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 21
Jun 25 17:46:22 Tearu-PC kernel: [    0.496726] pci 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 21 (level, low) -> IRQ 21
Jun 25 17:46:22 Tearu-PC kernel: [    0.571959] pci 0000:00:04.0: PCI INT A disabled
Jun 25 17:46:22 Tearu-PC kernel: [    0.572317] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 20
Jun 25 17:46:22 Tearu-PC kernel: [    0.572330] pci 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 20 (level, low) -> IRQ 20
Jun 25 17:46:22 Tearu-PC kernel: [    0.572346] pci 0000:00:04.1: PCI INT B disabled
Jun 25 17:46:22 Tearu-PC kernel: [    0.572443] pci 0000:00:08.0: Enabling HT MSI Mapping
Jun 25 17:46:22 Tearu-PC kernel: [    0.572541] pci 0000:00:09.0: Enabling HT MSI Mapping
Jun 25 17:46:22 Tearu-PC kernel: [    0.572646] pci 0000:00:0a.0: Enabling HT MSI Mapping
Jun 25 17:46:22 Tearu-PC kernel: [    0.572817] Unpacking initramfs...
Jun 25 17:46:22 Tearu-PC kernel: [    0.748833] Freeing initrd memory: 9093k freed
Jun 25 17:46:22 Tearu-PC kernel: [    0.752370] PCI-DMA: Disabling AGP.
Jun 25 17:46:22 Tearu-PC kernel: [    0.752452] PCI-DMA: aperture base @ 20000000 size 65536 KB
Jun 25 17:46:22 Tearu-PC kernel: [    0.752453] PCI-DMA: using GART IOMMU.
Jun 25 17:46:22 Tearu-PC kernel: [    0.752456] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
Jun 25 17:46:22 Tearu-PC kernel: [    0.754102] audit: initializing netlink socket (disabled)
Jun 25 17:46:22 Tearu-PC kernel: [    0.754112] type=2000 audit(1340646376.751:1): initialized
Jun 25 17:46:22 Tearu-PC kernel: [    0.756811] HugeTLB registered 2 MB page size, pre-allocated 0 pages
Jun 25 17:46:22 Tearu-PC kernel: [    0.758227] VFS: Disk quotas dquot_6.5.2
Jun 25 17:46:22 Tearu-PC kernel: [    0.758272] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Jun 25 17:46:22 Tearu-PC kernel: [    0.758339] msgmni has been set to 7930
Jun 25 17:46:22 Tearu-PC kernel: [    0.758530] alg: No test for stdrng (krng)
Jun 25 17:46:22 Tearu-PC kernel: [    0.758575] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Jun 25 17:46:22 Tearu-PC kernel: [    0.758578] io scheduler noop registered
Jun 25 17:46:22 Tearu-PC kernel: [    0.758579] io scheduler anticipatory registered
Jun 25 17:46:22 Tearu-PC kernel: [    0.758581] io scheduler deadline registered
Jun 25 17:46:22 Tearu-PC kernel: [    0.758631] io scheduler cfq registered (default)
Jun 25 17:46:22 Tearu-PC kernel: [    0.760855] Linux agpgart interface v0.103
Jun 25 17:46:22 Tearu-PC kernel: [    0.760888] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Jun 25 17:46:22 Tearu-PC kernel: [    0.760974] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jun 25 17:46:22 Tearu-PC kernel: [    0.761284] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jun 25 17:46:22 Tearu-PC kernel: [    0.761406] input: Macintosh mouse button emulation as /devices/virtual/input/input0
Jun 25 17:46:22 Tearu-PC kernel: [    0.761455] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
Jun 25 17:46:22 Tearu-PC kernel: [    0.761456] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
Jun 25 17:46:22 Tearu-PC kernel: [    0.761592] serio: i8042 KBD port at 0x60,0x64 irq 1
Jun 25 17:46:22 Tearu-PC kernel: [    0.761654] mice: PS/2 mouse device common for all mice
Jun 25 17:46:22 Tearu-PC kernel: [    0.761691] rtc_cmos 00:08: RTC can wake from S4
Jun 25 17:46:22 Tearu-PC kernel: [    0.761715] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
Jun 25 17:46:22 Tearu-PC kernel: [    0.761777] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
Jun 25 17:46:22 Tearu-PC kernel: [    0.761786] cpuidle: using governor ladder
Jun 25 17:46:22 Tearu-PC kernel: [    0.761788] cpuidle: using governor menu
Jun 25 17:46:22 Tearu-PC kernel: [    0.761792] No iBFT detected.
Jun 25 17:46:22 Tearu-PC kernel: [    0.762105] TCP cubic registered
Jun 25 17:46:22 Tearu-PC kernel: [    0.762215] NET: Registered protocol family 10
Jun 25 17:46:22 Tearu-PC kernel: [    0.762940] Mobile IPv6
Jun 25 17:46:22 Tearu-PC kernel: [    0.762942] NET: Registered protocol family 17
Jun 25 17:46:22 Tearu-PC kernel: [    0.763011] registered taskstats version 1
Jun 25 17:46:22 Tearu-PC kernel: [    0.763488] rtc_cmos 00:08: setting system clock to 2012-06-25 17:46:17 UTC (1340646377)
Jun 25 17:46:22 Tearu-PC kernel: [    0.763530] Initalizing network drop monitor service
Jun 25 17:46:22 Tearu-PC kernel: [    0.763554] Freeing unused kernel memory: 592k freed
Jun 25 17:46:22 Tearu-PC kernel: [    0.763705] Write protecting the kernel read-only data: 4240k
Jun 25 17:46:22 Tearu-PC kernel: [    0.776678] udev[92]: starting version 164
Jun 25 17:46:22 Tearu-PC kernel: [    0.779103] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Jun 25 17:46:22 Tearu-PC kernel: [    0.837970] usbcore: registered new interface driver usbfs
Jun 25 17:46:22 Tearu-PC kernel: [    0.838041] usbcore: registered new interface driver hub
Jun 25 17:46:22 Tearu-PC kernel: [    0.838155] usbcore: registered new device driver usb
Jun 25 17:46:22 Tearu-PC kernel: [    0.846927] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jun 25 17:46:22 Tearu-PC kernel: [    0.847192] SCSI subsystem initialized
Jun 25 17:46:22 Tearu-PC kernel: [    0.858571] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
Jun 25 17:46:22 Tearu-PC kernel: [    0.858606] ehci_hcd 0000:00:02.1: EHCI Host Controller
Jun 25 17:46:22 Tearu-PC kernel: [    0.858638] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
Jun 25 17:46:22 Tearu-PC kernel: [    0.858669] ehci_hcd 0000:00:02.1: debug port 1
Jun 25 17:46:22 Tearu-PC kernel: [    0.858696] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfea7fc00
Jun 25 17:46:22 Tearu-PC kernel: [    0.864028] Floppy drive(s): fd0 is 1.44M
Jun 25 17:46:22 Tearu-PC kernel: [    0.867832] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
Jun 25 17:46:22 Tearu-PC kernel: [    0.867852] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Jun 25 17:46:22 Tearu-PC kernel: [    0.867854] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 25 17:46:22 Tearu-PC kernel: [    0.867856] usb usb1: Product: EHCI Host Controller
Jun 25 17:46:22 Tearu-PC kernel: [    0.867858] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
Jun 25 17:46:22 Tearu-PC kernel: [    0.867859] usb usb1: SerialNumber: 0000:00:02.1
Jun 25 17:46:22 Tearu-PC kernel: [    0.867930] usb usb1: configuration #1 chosen from 1 choice
Jun 25 17:46:22 Tearu-PC kernel: [    0.867956] hub 1-0:1.0: USB hub found
Jun 25 17:46:22 Tearu-PC kernel: [    0.867963] hub 1-0:1.0: 6 ports detected
Jun 25 17:46:22 Tearu-PC kernel: [    0.868045] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
Jun 25 17:46:22 Tearu-PC kernel: [    0.868466] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
Jun 25 17:46:22 Tearu-PC kernel: [    0.868471] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
Jun 25 17:46:22 Tearu-PC kernel: [    0.883451] FDC 0 is a post-1991 82077
Jun 25 17:46:22 Tearu-PC kernel: [    0.933104] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:23:54:c4:5b:6c
Jun 25 17:46:22 Tearu-PC kernel: [    0.933108] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3
Jun 25 17:46:22 Tearu-PC kernel: [    0.933541] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 22
Jun 25 17:46:22 Tearu-PC kernel: [    0.933545] ahci 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 22 (level, low) -> IRQ 22
Jun 25 17:46:22 Tearu-PC kernel: [    0.933648] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0xf impl IDE mode
Jun 25 17:46:22 Tearu-PC kernel: [    0.933652] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio boh 
Jun 25 17:46:22 Tearu-PC kernel: [    0.933888] scsi0 : ahci
Jun 25 17:46:22 Tearu-PC kernel: [    0.933985] scsi1 : ahci
Jun 25 17:46:22 Tearu-PC kernel: [    0.934035] scsi2 : ahci
Jun 25 17:46:22 Tearu-PC kernel: [    0.934084] scsi3 : ahci
Jun 25 17:46:22 Tearu-PC kernel: [    0.934131] scsi4 : ahci
Jun 25 17:46:22 Tearu-PC kernel: [    0.934177] scsi5 : ahci
Jun 25 17:46:22 Tearu-PC kernel: [    0.934302] ata1: SATA max UDMA/133 abar m8192@0xfea7a000 port 0xfea7a100 irq 26
Jun 25 17:46:22 Tearu-PC kernel: [    0.934305] ata2: SATA max UDMA/133 abar m8192@0xfea7a000 port 0xfea7a180 irq 26
Jun 25 17:46:22 Tearu-PC kernel: [    0.934308] ata3: SATA max UDMA/133 abar m8192@0xfea7a000 port 0xfea7a200 irq 26
Jun 25 17:46:22 Tearu-PC kernel: [    0.934312] ata4: SATA max UDMA/133 abar m8192@0xfea7a000 port 0xfea7a280 irq 26
Jun 25 17:46:22 Tearu-PC kernel: [    0.934314] ata5: DUMMY
Jun 25 17:46:22 Tearu-PC kernel: [    0.934316] ata6: DUMMY
Jun 25 17:46:22 Tearu-PC kernel: [    0.934614] scsi6 : pata_amd
Jun 25 17:46:22 Tearu-PC kernel: [    0.934662] scsi7 : pata_amd
Jun 25 17:46:22 Tearu-PC kernel: [    0.935737] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
Jun 25 17:46:22 Tearu-PC kernel: [    0.935741] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
Jun 25 17:46:22 Tearu-PC kernel: [    0.935834] ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 20 (level, low) -> IRQ 20
Jun 25 17:46:22 Tearu-PC kernel: [    0.935851] ehci_hcd 0000:00:04.1: EHCI Host Controller
Jun 25 17:46:22 Tearu-PC kernel: [    0.935920] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
Jun 25 17:46:22 Tearu-PC kernel: [    0.935945] ehci_hcd 0000:00:04.1: debug port 1
Jun 25 17:46:22 Tearu-PC kernel: [    0.935966] ehci_hcd 0000:00:04.1: irq 20, io mem 0xfea7f800
Jun 25 17:46:22 Tearu-PC kernel: [    0.947831] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
Jun 25 17:46:22 Tearu-PC kernel: [    0.947849] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Jun 25 17:46:22 Tearu-PC kernel: [    0.947851] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 25 17:46:22 Tearu-PC kernel: [    0.947853] usb usb2: Product: EHCI Host Controller
Jun 25 17:46:22 Tearu-PC kernel: [    0.947855] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
Jun 25 17:46:22 Tearu-PC kernel: [    0.947857] usb usb2: SerialNumber: 0000:00:04.1
Jun 25 17:46:22 Tearu-PC kernel: [    0.947932] usb usb2: configuration #1 chosen from 1 choice
Jun 25 17:46:22 Tearu-PC kernel: [    0.947958] hub 2-0:1.0: USB hub found
Jun 25 17:46:22 Tearu-PC kernel: [    0.947964] hub 2-0:1.0: 6 ports detected
Jun 25 17:46:22 Tearu-PC kernel: [    0.961350] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Jun 25 17:46:22 Tearu-PC kernel: [    0.961394] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
Jun 25 17:46:22 Tearu-PC kernel: [    0.961418] ohci_hcd 0000:00:02.0: OHCI Host Controller
Jun 25 17:46:22 Tearu-PC kernel: [    0.961428] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
Jun 25 17:46:22 Tearu-PC kernel: [    0.961451] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfea7e000
Jun 25 17:46:22 Tearu-PC kernel: [    1.017840] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Jun 25 17:46:22 Tearu-PC kernel: [    1.017843] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 25 17:46:22 Tearu-PC kernel: [    1.017845] usb usb3: Product: OHCI Host Controller
Jun 25 17:46:22 Tearu-PC kernel: [    1.017847] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
Jun 25 17:46:22 Tearu-PC kernel: [    1.017849] usb usb3: SerialNumber: 0000:00:02.0
Jun 25 17:46:22 Tearu-PC kernel: [    1.017911] usb usb3: configuration #1 chosen from 1 choice
Jun 25 17:46:22 Tearu-PC kernel: [    1.017936] hub 3-0:1.0: USB hub found
Jun 25 17:46:22 Tearu-PC kernel: [    1.017944] hub 3-0:1.0: 6 ports detected
Jun 25 17:46:22 Tearu-PC kernel: [    1.018028] ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 21 (level, low) -> IRQ 21
Jun 25 17:46:22 Tearu-PC kernel: [    1.018048] ohci_hcd 0000:00:04.0: OHCI Host Controller
Jun 25 17:46:22 Tearu-PC kernel: [    1.018058] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
Jun 25 17:46:22 Tearu-PC kernel: [    1.018082] ohci_hcd 0000:00:04.0: irq 21, io mem 0xfea7d000
Jun 25 17:46:22 Tearu-PC kernel: [    1.066032] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Jun 25 17:46:22 Tearu-PC kernel: [    1.066034] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun 25 17:46:22 Tearu-PC kernel: [    1.066036] usb usb4: Product: OHCI Host Controller
Jun 25 17:46:22 Tearu-PC kernel: [    1.066038] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
Jun 25 17:46:22 Tearu-PC kernel: [    1.066040] usb usb4: SerialNumber: 0000:00:04.0
Jun 25 17:46:22 Tearu-PC kernel: [    1.066091] usb usb4: configuration #1 chosen from 1 choice
Jun 25 17:46:22 Tearu-PC kernel: [    1.066111] hub 4-0:1.0: USB hub found
Jun 25 17:46:22 Tearu-PC kernel: [    1.066117] hub 4-0:1.0: 6 ports detected
Jun 25 17:46:22 Tearu-PC kernel: [    1.200029] ata2: SATA link down (SStatus 0 SControl 300)
Jun 25 17:46:22 Tearu-PC kernel: [    1.288015] usb 1-4: new high speed USB device using ehci_hcd and address 3
Jun 25 17:46:22 Tearu-PC kernel: [    1.364012] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jun 25 17:46:22 Tearu-PC kernel: [    1.364025] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jun 25 17:46:22 Tearu-PC kernel: [    1.364350] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jun 25 17:46:22 Tearu-PC kernel: [    1.364715] ata3.00: ATA-8: ST2000DL003-9VT166, CC3C, max UDMA/133
Jun 25 17:46:22 Tearu-PC kernel: [    1.364718] ata3.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
Jun 25 17:46:22 Tearu-PC kernel: [    1.365071] ata1.00: ATA-8: ST3500418AS, CC38, max UDMA/133
Jun 25 17:46:22 Tearu-PC kernel: [    1.365073] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
Jun 25 17:46:22 Tearu-PC kernel: [    1.365515] ata3.00: configured for UDMA/133
Jun 25 17:46:22 Tearu-PC kernel: [    1.366304] ata1.00: configured for UDMA/133
Jun 25 17:46:22 Tearu-PC kernel: [    1.366419] scsi 0:0:0:0: Direct-Access     ATA      ST3500418AS      CC38 PQ: 0 ANSI: 5
Jun 25 17:46:22 Tearu-PC kernel: [    1.366624] scsi 2:0:0:0: Direct-Access     ATA      ST2000DL003-9VT1 CC3C PQ: 0 ANSI: 5
Jun 25 17:46:22 Tearu-PC kernel: [    1.367803] ata4.00: ATAPI: HL-DT-ST DVDRAM GH22NS40, NL02, max UDMA/100
Jun 25 17:46:22 Tearu-PC kernel: [    1.371647] ata4.00: configured for UDMA/100
Jun 25 17:46:22 Tearu-PC kernel: [    1.380247] scsi 3:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH22NS40  NL02 PQ: 0 ANSI: 5
Jun 25 17:46:22 Tearu-PC kernel: [    1.386865] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
Jun 25 17:46:22 Tearu-PC kernel: [    1.386906] sd 0:0:0:0: [sda] Write Protect is off
Jun 25 17:46:22 Tearu-PC kernel: [    1.386924] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 25 17:46:22 Tearu-PC kernel: [    1.387022]  sda:
Jun 25 17:46:22 Tearu-PC kernel: [    1.387950] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
Jun 25 17:46:22 Tearu-PC kernel: [    1.387953] sd 2:0:0:0: [sdb] 4096-byte physical blocks
Jun 25 17:46:22 Tearu-PC kernel: [    1.387992] sd 2:0:0:0: [sdb] Write Protect is off
Jun 25 17:46:22 Tearu-PC kernel: [    1.388074] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 25 17:46:22 Tearu-PC kernel: [    1.388240]  sdb: sda1 sda2 sda3 sda4 < sda5 sda6 >
Jun 25 17:46:22 Tearu-PC kernel: [    1.414168] sd 0:0:0:0: [sda] Attached SCSI disk
Jun 25 17:46:22 Tearu-PC kernel: [    1.431641]  sdb1 sdb2 sdb3 sdb4
Jun 25 17:46:22 Tearu-PC kernel: [    1.431911] sd 2:0:0:0: [sdb] Attached SCSI disk
Jun 25 17:46:22 Tearu-PC kernel: [    1.455391] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Jun 25 17:46:22 Tearu-PC kernel: [    1.455394] Uniform CD-ROM driver Revision: 3.20
Jun 25 17:46:22 Tearu-PC kernel: [    1.458655] sd 0:0:0:0: Attached scsi generic sg0 type 0
Jun 25 17:46:22 Tearu-PC kernel: [    1.458684] sd 2:0:0:0: Attached scsi generic sg1 type 0
Jun 25 17:46:22 Tearu-PC kernel: [    1.458706] sr 3:0:0:0: Attached scsi generic sg2 type 5
Jun 25 17:46:22 Tearu-PC kernel: [    1.490744] usb 1-4: New USB device found, idVendor=054c, idProduct=01bd
Jun 25 17:46:22 Tearu-PC kernel: [    1.490747] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jun 25 17:46:22 Tearu-PC kernel: [    1.490750] usb 1-4: Product: Silicon Media R/W
Jun 25 17:46:22 Tearu-PC kernel: [    1.490751] usb 1-4: Manufacturer: Sony
Jun 25 17:46:22 Tearu-PC kernel: [    1.490753] usb 1-4: SerialNumber: 000000077A69
Jun 25 17:46:22 Tearu-PC kernel: [    1.490823] usb 1-4: configuration #1 chosen from 1 choice
Jun 25 17:46:22 Tearu-PC kernel: [    1.496212] Initializing USB Mass Storage driver...
Jun 25 17:46:22 Tearu-PC kernel: [    1.496316] scsi8 : SCSI emulation for USB Mass Storage devices
Jun 25 17:46:22 Tearu-PC kernel: [    1.496410] usbcore: registered new interface driver usb-storage
Jun 25 17:46:22 Tearu-PC kernel: [    1.496413] USB Mass Storage support registered.
Jun 25 17:46:22 Tearu-PC kernel: [    1.796023] usb 3-1: new full speed USB device using ohci_hcd and address 2
Jun 25 17:46:22 Tearu-PC kernel: [    1.909833] PM: Starting manual resume from disk
Jun 25 17:46:22 Tearu-PC kernel: [    1.969581] EXT4-fs (sda3): mounted filesystem with ordered data mode
Jun 25 17:46:22 Tearu-PC kernel: [    2.008885] usb 3-1: New USB device found, idVendor=09da, idProduct=9033
Jun 25 17:46:22 Tearu-PC kernel: [    2.008888] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jun 25 17:46:22 Tearu-PC kernel: [    2.008891] usb 3-1: Product: USB Device
Jun 25 17:46:22 Tearu-PC kernel: [    2.008892] usb 3-1: Manufacturer: A4TECH
Jun 25 17:46:22 Tearu-PC kernel: [    2.008976] usb 3-1: configuration #1 chosen from 1 choice
Jun 25 17:46:22 Tearu-PC kernel: [    2.019377] usbcore: registered new interface driver hiddev
Jun 25 17:46:22 Tearu-PC kernel: [    2.024201] input: A4TECH USB Device as /devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1:1.0/input/input2
Jun 25 17:46:22 Tearu-PC kernel: [    2.024286] generic-usb 0003:09DA:9033.0001: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:02.0-1/input0
Jun 25 17:46:22 Tearu-PC kernel: [    2.030078] input: A4TECH USB Device as /devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1:1.1/input/input3
Jun 25 17:46:22 Tearu-PC kernel: [    2.030135] generic-usb 0003:09DA:9033.0002: input,hidraw1: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:02.0-1/input1
Jun 25 17:46:22 Tearu-PC kernel: [    2.030154] usbcore: registered new interface driver usbhid
Jun 25 17:46:22 Tearu-PC kernel: [    2.030157] usbhid: v2.6:USB HID core driver
Jun 25 17:46:22 Tearu-PC kernel: [    2.120683] usb 2-2: new high speed USB device using ehci_hcd and address 2
Jun 25 17:46:22 Tearu-PC kernel: [    2.255656] usb 2-2: New USB device found, idVendor=04e8, idProduct=6881
Jun 25 17:46:22 Tearu-PC kernel: [    2.255659] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jun 25 17:46:22 Tearu-PC kernel: [    2.255661] usb 2-2: Product: Samsung Android USB Device
Jun 25 17:46:22 Tearu-PC kernel: [    2.255663] usb 2-2: Manufacturer: SAMSUNG Electronics Co., Ltd.
Jun 25 17:46:22 Tearu-PC kernel: [    2.255665] usb 2-2: SerialNumber: S56601a74ae6a
Jun 25 17:46:22 Tearu-PC kernel: [    2.255739] usb 2-2: configuration #1 chosen from 1 choice
Jun 25 17:46:22 Tearu-PC kernel: [    2.942574] udev[583]: starting version 164
Jun 25 17:46:22 Tearu-PC kernel: [    3.144153] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
Jun 25 17:46:22 Tearu-PC kernel: [    3.144160] ACPI: Power Button [PWRB]
Jun 25 17:46:22 Tearu-PC kernel: [    3.144224] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
Jun 25 17:46:22 Tearu-PC kernel: [    3.144227] ACPI: Power Button [PWRF]
Jun 25 17:46:22 Tearu-PC kernel: [    3.155168] processor LNXCPU:00: registered as cooling_device0
Jun 25 17:46:22 Tearu-PC kernel: [    3.155200] processor LNXCPU:01: registered as cooling_device1
Jun 25 17:46:22 Tearu-PC kernel: [    3.155248] processor LNXCPU:02: registered as cooling_device2
Jun 25 17:46:22 Tearu-PC kernel: [    3.249286] input: PC Speaker as /devices/platform/pcspkr/input/input6
Jun 25 17:46:22 Tearu-PC kernel: [    3.262218] ACPI: WMI: Mapper loaded
Jun 25 17:46:22 Tearu-PC kernel: [    3.953036] [drm] Initialized drm 1.1.0 20060810
Jun 25 17:46:22 Tearu-PC kernel: [    3.953632] i2c i2c-0: nForce2 SMBus adapter at 0x600
Jun 25 17:46:22 Tearu-PC kernel: [    3.953667] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Jun 25 17:46:22 Tearu-PC kernel: [    3.960114] EDAC MC: Ver: 2.1.0 May  6 2012
Jun 25 17:46:22 Tearu-PC kernel: [    4.084828] EDAC amd64_edac:  Ver: 3.2.0 May  6 2012
Jun 25 17:46:22 Tearu-PC kernel: [    4.084901] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
Jun 25 17:46:22 Tearu-PC kernel: [    4.084909] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Jun 25 17:46:22 Tearu-PC kernel: [    4.084910]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
Jun 25 17:46:22 Tearu-PC kernel: [    4.084911]  (Note that use of the override may cause unknown side effects.)
Jun 25 17:46:22 Tearu-PC kernel: [    4.084927] amd64_edac: probe of 0000:00:18.2 failed with error -22
Jun 25 17:46:22 Tearu-PC kernel: [    4.087066] parport_pc 00:05: reported by Plug and Play ACPI
Jun 25 17:46:22 Tearu-PC kernel: [    4.087211] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Jun 25 17:46:22 Tearu-PC kernel: [    4.258911] [drm] radeon kernel modesetting enabled.
Jun 25 17:46:22 Tearu-PC kernel: [    4.259864] usbcore: registered new interface driver cdc_ether
Jun 25 17:46:22 Tearu-PC kernel: [    4.259968] radeon 0000:02:00.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19
Jun 25 17:46:22 Tearu-PC kernel: [    4.261989] [drm] radeon: Initializing kernel modesetting.
Jun 25 17:46:22 Tearu-PC kernel: [    4.262116] [drm] register mmio base: 0xFEBE0000
Jun 25 17:46:22 Tearu-PC kernel: [    4.262118] [drm] register mmio size: 65536
Jun 25 17:46:22 Tearu-PC kernel: [    4.266752] ATOM BIOS: 11X
Jun 25 17:46:22 Tearu-PC kernel: [    4.266763] [drm] Clocks initialized !
Jun 25 17:46:22 Tearu-PC kernel: [    4.267561] [drm] Detected VRAM RAM=256M, BAR=256M
Jun 25 17:46:22 Tearu-PC kernel: [    4.267565] [drm] RAM width 256bits DDR
Jun 25 17:46:22 Tearu-PC kernel: [    4.267661] [TTM] Zone  kernel: Available graphics memory: 2030478 kiB.
Jun 25 17:46:22 Tearu-PC kernel: [    4.267679] [drm] radeon: 256M of VRAM memory ready
Jun 25 17:46:22 Tearu-PC kernel: [    4.267681] [drm] radeon: 512M of GTT memory ready.
Jun 25 17:46:22 Tearu-PC kernel: [    4.267735] radeon 0000:02:00.0: radeon: using MSI.
Jun 25 17:46:22 Tearu-PC kernel: [    4.267761] [drm] radeon: irq initialized.
Jun 25 17:46:22 Tearu-PC kernel: [    4.267764] [drm] GART: num cpu pages 131072, num gpu pages 131072
Jun 25 17:46:22 Tearu-PC kernel: [    4.268213] [drm] Loading RV670 Microcode
Jun 25 17:46:22 Tearu-PC kernel: [    4.268216] platform radeon_cp.0: firmware: requesting radeon/RV670_pfp.bin
Jun 25 17:46:22 Tearu-PC kernel: [    4.275970] usb0: register 'rndis_host' at usb-0000:00:04.1-2, RNDIS device, e2:65:cd:66:37:93
Jun 25 17:46:22 Tearu-PC kernel: [    4.275993] usbcore: registered new interface driver rndis_host
Jun 25 17:46:22 Tearu-PC kernel: [    4.321634] cfg80211: Using static regulatory domain info
Jun 25 17:46:22 Tearu-PC kernel: [    4.321637] cfg80211: Regulatory domain: US
Jun 25 17:46:22 Tearu-PC kernel: [    4.321639]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jun 25 17:46:22 Tearu-PC kernel: [    4.321641]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
Jun 25 17:46:22 Tearu-PC kernel: [    4.321644]     (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Jun 25 17:46:22 Tearu-PC kernel: [    4.321646]     (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Jun 25 17:46:22 Tearu-PC kernel: [    4.321648]     (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Jun 25 17:46:22 Tearu-PC kernel: [    4.321650]     (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Jun 25 17:46:22 Tearu-PC kernel: [    4.321652]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
Jun 25 17:46:22 Tearu-PC kernel: [    4.321750] cfg80211: Calling CRDA for country: US
Jun 25 17:46:22 Tearu-PC kernel: [    4.346386] usbcore: registered new interface driver rndis_wlan
Jun 25 17:46:22 Tearu-PC kernel: [    4.401161] radeon 0000:02:00.0: ffff88012eb50600 unpin not necessary
Jun 25 17:46:22 Tearu-PC kernel: [    4.401164] radeon 0000:02:00.0: ffff88012eb50600 unpin not necessary
Jun 25 17:46:22 Tearu-PC kernel: [    4.401178] [drm] Enabling audio support
Jun 25 17:46:22 Tearu-PC kernel: [    4.401258] [drm] Default TV standard: PAL
Jun 25 17:46:22 Tearu-PC kernel: [    4.401308] [drm] Radeon Display Connectors
Jun 25 17:46:22 Tearu-PC kernel: [    4.401309] [drm] Connector 0:
Jun 25 17:46:22 Tearu-PC kernel: [    4.401311] [drm]   DVI-I
Jun 25 17:46:22 Tearu-PC kernel: [    4.401312] [drm]   HPD1
Jun 25 17:46:22 Tearu-PC kernel: [    4.401314] [drm]   DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
Jun 25 17:46:22 Tearu-PC kernel: [    4.401315] [drm]   Encoders:
Jun 25 17:46:22 Tearu-PC kernel: [    4.401317] [drm]     DFP1: INTERNAL_KLDSCP_TMDS1
Jun 25 17:46:22 Tearu-PC kernel: [    4.401318] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
Jun 25 17:46:22 Tearu-PC kernel: [    4.401320] [drm] Connector 1:
Jun 25 17:46:22 Tearu-PC kernel: [    4.401321] [drm]   DIN
Jun 25 17:46:22 Tearu-PC kernel: [    4.401321] [drm]   Encoders:
Jun 25 17:46:22 Tearu-PC kernel: [    4.401323] [drm]     TV1: INTERNAL_KLDSCP_DAC2
Jun 25 17:46:22 Tearu-PC kernel: [    4.401324] [drm] Connector 2:
Jun 25 17:46:22 Tearu-PC kernel: [    4.401325] [drm]   DVI-I
Jun 25 17:46:22 Tearu-PC kernel: [    4.401326] [drm]   HPD2
Jun 25 17:46:22 Tearu-PC kernel: [    4.401328] [drm]   DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
Jun 25 17:46:22 Tearu-PC kernel: [    4.401329] [drm]   Encoders:
Jun 25 17:46:22 Tearu-PC kernel: [    4.401331] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
Jun 25 17:46:22 Tearu-PC kernel: [    4.401332] [drm]     DFP2: INTERNAL_LVTM1
Jun 25 17:46:22 Tearu-PC kernel: [    4.425493] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 17
Jun 25 17:46:22 Tearu-PC kernel: [    4.425509] CA0106 0000:01:07.0: PCI INT A -> Link[LNKB] -> GSI 17 (level, low) -> IRQ 17
Jun 25 17:46:22 Tearu-PC kernel: [    4.425536] snd-ca0106: Model 100a Rev 00000000 Serial 100a1102
Jun 25 17:46:22 Tearu-PC kernel: [    4.551203] [drm] fb mappable at 0xD0040000
Jun 25 17:46:22 Tearu-PC kernel: [    4.551205] [drm] vram apper at 0xD0000000
Jun 25 17:46:22 Tearu-PC kernel: [    4.551207] [drm] size 5299200
Jun 25 17:46:22 Tearu-PC kernel: [    4.551208] [drm] fb depth is 24
Jun 25 17:46:22 Tearu-PC kernel: [    4.551210] [drm]    pitch is 5888
Jun 25 17:46:22 Tearu-PC kernel: [    4.564458] Console: switching to colour frame buffer device 180x56
Jun 25 17:46:22 Tearu-PC kernel: [    4.568700] fb0: radeondrmfb frame buffer device
Jun 25 17:46:22 Tearu-PC kernel: [    4.568702] registered panic notifier
Jun 25 17:46:22 Tearu-PC kernel: [    4.568706] [drm] Initialized radeon 2.0.0 20080528 for 0000:02:00.0 on minor 0
Jun 25 17:46:22 Tearu-PC kernel: [    4.569181] ACPI: PCI Interrupt Link [LN0B] enabled at IRQ 16
Jun 25 17:46:22 Tearu-PC kernel: [    4.569197] HDA Intel 0000:02:00.1: PCI INT B -> Link[LN0B] -> GSI 16 (level, low) -> IRQ 16
Jun 25 17:46:22 Tearu-PC kernel: [    4.965652] Adding 3772408k swap on /dev/sda6.  Priority:-1 extents:1 across:3772408k 
Jun 25 17:46:22 Tearu-PC kernel: [    5.197463] loop: module loaded
Jun 25 17:46:23 Tearu-PC kernel: [    6.506558] scsi 8:0:0:0: Direct-Access     Sony     USB   HS-CF Card 3.95 PQ: 0 ANSI: 0
Jun 25 17:46:23 Tearu-PC kernel: [    6.510299] scsi 8:0:0:1: Direct-Access     Sony     USB   HS-SM Card 3.95 PQ: 0 ANSI: 0
Jun 25 17:46:23 Tearu-PC kernel: [    6.514300] scsi 8:0:0:2: Direct-Access     Sony     USB   HS-MS Card 3.95 PQ: 0 ANSI: 0
Jun 25 17:46:23 Tearu-PC kernel: [    6.517549] scsi 8:0:0:3: Direct-Access     Sony     USB   HS-SD Card 3.95 PQ: 0 ANSI: 0
Jun 25 17:46:23 Tearu-PC kernel: [    6.517902] sd 8:0:0:0: Attached scsi generic sg3 type 0
Jun 25 17:46:23 Tearu-PC kernel: [    6.518014] sd 8:0:0:1: Attached scsi generic sg4 type 0
Jun 25 17:46:23 Tearu-PC kernel: [    6.518398] sd 8:0:0:2: Attached scsi generic sg5 type 0
Jun 25 17:46:23 Tearu-PC kernel: [    6.518592] sd 8:0:0:3: Attached scsi generic sg6 type 0
Jun 25 17:46:23 Tearu-PC kernel: [    6.619933] sd 8:0:0:0: [sdc] Attached SCSI removable disk
Jun 25 17:46:23 Tearu-PC kernel: [    6.624679] sd 8:0:0:2: [sde] Attached SCSI removable disk
Jun 25 17:46:23 Tearu-PC kernel: [    6.628919] sd 8:0:0:3: [sdf] Attached SCSI removable disk
Jun 25 17:46:23 Tearu-PC kernel: [    6.633420] sd 8:0:0:1: [sdd] Attached SCSI removable disk
Jun 25 17:51:25 Tearu-PC rsyslogd: [origin software="rsyslogd" swVersion="4.6.4" x-pid="1337" x-info="http://www.rsyslog.com"] rsyslogd was HUPed, type 'lightweight'.
Jun 25 18:27:51 Tearu-PC kernel: [ 2494.848012] usb 4-5: new low speed USB device using ohci_hcd and address 2
Jun 25 18:27:51 Tearu-PC kernel: [ 2495.063048] usb 4-5: New USB device found, idVendor=046e, idProduct=5533
Jun 25 18:27:51 Tearu-PC kernel: [ 2495.063052] usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jun 25 18:27:51 Tearu-PC kernel: [ 2495.063055] usb 4-5: Product: Labtec Wireless Laser Mouse
Jun 25 18:27:51 Tearu-PC kernel: [ 2495.063056] usb 4-5: Manufacturer: Device
Jun 25 18:27:51 Tearu-PC kernel: [ 2495.063144] usb 4-5: configuration #1 chosen from 1 choice
Jun 25 18:27:51 Tearu-PC kernel: [ 2495.076278] input: Device Labtec Wireless Laser Mouse as /devices/pci0000:00/0000:00:04.0/usb4/4-5/4-5:1.0/input/input7
Jun 25 18:27:51 Tearu-PC kernel: [ 2495.076370] generic-usb 0003:046E:5533.0003: input,hidraw2: USB HID v1.10 Mouse [Device Labtec Wireless Laser Mouse] on usb-0000:00:04.0-5/input0
To na tyle logów narazie.

Podczepiony temat przeczytałem, ale nadal brak idei. Mysz pozostawiona na dłuższy czas samopas nie ma problemów, za to podczas wykonywania jakichś czynności dopiero ma, np, podczas pisania posta przenosiłem treść loga do przeglądarki za pomocą myszy i właśnie wtedy mysz się zamroziła.

Muszę to jeszcze raz rano przeczytać może będę mądrzejszy jak sie z tym prześpie xD

: 26 czerwca 2012, 18:13
autor: Rafal_F
Niepotrzebnie wyciąłeś czas z logów xorga. Ta informacja o myszce macintosha pojawia się na początku działania xorga, czy po pewnym czasie (kiedy mysz przestaje reagować)?
Daj jeszcze log /var/log/dmesg
Strefa czasowa UTC+02:00
Strona 1 z 2

Technologię dostarcza phpBB® Forum Software © phpBB Limited

Polski pakiet językowy dostarcza phpBB.pl