Polskie Forum Użytkowników Debiana

Polski portal użytkowników dystrybucji Debian GNU/Linux, dyskusje, artykuły, nowości, blog, porady, pomoc.
https://www.debian.pl/

Zamkni

https://www.debian.pl/viewtopic.php?t=26390

Strona 1 z 1

Zamknięte sterowniki ATI - zwalnianie obrazu, błędy glxinfo

: 07 marca 2012, 21:19
autor: gromiz
Cześć

Mam problem z ustawieniami karty graficznej AMD Radeon HD 6320. Jest to karta graficzna wbudowana w procesor AMD E-450. Zainstalowałem Debiana 6.0.4 (tego stabilnego). Po instalacji nie miałem standardowo ustawionej rozdzielczości dopasowanej do mojego wyświetlacza. Postanowiłem zainstalować sobie testowo sterowniki oryginalne AMD. Pobrałem ze strony sterownik: amd-driver-installer-12-1-x86.x86_64.run (na stronie wybrałem sterownik dla Radeon HD 6xxxM series). Instalacja przebiegła prawidłowo, rozdzielczość po restarcie w porządku, ale podczas przesuwania okien strasznie wszystko zwalnia. Chwytam okno, przesuwam i jego części pozostają. Przewijanie zawartości okien zwalnia. Ogólnie wszystko działa wolno. W jednym z tematów znalazłem informację, aby wpisać to:

Kod: Zaznacz cały

aticonfig --set-pcs-u32=DDX,EnableTearFreeDesktop,1
Niestety to nie pomogło.

Wersja jądra:

Kod: Zaznacz cały

Linux gromiz 2.6.32-5-amd64 #1 SMP Mon Jan 16 16:22:28 UTC 2012 x86_64 GNU/Linux
Architektura AMD64.

Polecenie:

Kod: Zaznacz cały

 lspci -n
wyświetla:

Kod: Zaznacz cały

00:00.0 0600: 1022:1510
00:01.0 0300: 1002:9806
00:01.1 0403: 1002:1314
00:04.0 0604: 1022:1512
00:11.0 0106: 1002:4391 (rev 40)
00:12.0 0c03: 1002:4397
00:12.2 0c03: 1002:4396
00:13.0 0c03: 1002:4397
00:13.2 0c03: 1002:4396
00:14.0 0c05: 1002:4385 (rev 42)
00:14.1 0101: 1002:439c (rev 40)
00:14.2 0403: 1002:4383 (rev 40)
00:14.3 0601: 1002:439d (rev 40)
00:14.4 0604: 1002:4384 (rev 40)
00:15.0 0604: 1002:43a0
00:15.1 0604: 1002:43a1
00:15.2 0604: 1002:43a2
00:15.3 0604: 1002:43a3
00:18.0 0600: 1022:1700 (rev 43)
00:18.1 0600: 1022:1701
00:18.2 0600: 1022:1702
00:18.3 0600: 1022:1703
00:18.4 0600: 1022:1704
00:18.5 0600: 1022:1718
00:18.6 0600: 1022:1716
00:18.7 0600: 1022:1719
04:00.0 ff00: 10ec:5289 (rev 01)
04:00.2 0200: 10ec:8168 (rev 0a)
05:00.0 0c03: 1b21:1042
06:00.0 0280: 168c:002b (rev 01)
Zawartość Xorg.0.log:

Kod: Zaznacz cały

X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.0.0-1-amd64 x86_64 Debian
Current Operating System: Linux gromiz 2.6.32-5-amd64 #1 SMP Mon Jan 16 16:22:28 UTC 2012 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=08315823-ffb9-4dd5-9e30-71c787d1c73d ro quiet
Build Date: 29 October 2011  06:58:14PM
xorg-server 2:1.7.7-14 (Julien Cristau <jcristau@debian.org>) 
Current version of pixman: 0.16.4
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar  7 20:40:11 2012
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) ServerLayout "aticonfig Layout"
(**) |-->Screen "aticonfig-Screen[0]-0" (0)
(**) |   |-->Monitor "aticonfig-Monitor[0]-0"
(**) |   |-->Device "aticonfig-Device[0]-0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
    Entry deleted from font path.
(==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
    built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x7c8a40
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 6.0
    X.Org XInput driver : 7.0
    X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:0:1:0) 1002:9806:1043:1437 ATI Technologies Inc rev 0, Mem @ 0xc0000000/268435456, 0xfeb00000/262144, I/O @ 0x0000f000/256
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded by default.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="Advanced Micro Devices, Inc."
    compiled for 6.9.0, module version = 1.0.0
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
    compiled for 1.4.99.906, module version = 8.93.4
    Module class: X.Org Video Driver
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    compiled for 1.4.99.906, module version = 8.93.4
(II) ATI Proprietary Linux Driver Version Identifier:8.93.4
(II) ATI Proprietary Linux Driver Release Identifier: 8.93                                 
(II) ATI Proprietary Linux Driver Build Date: Dec  5 2011 21:06:58
(II) Primary Device is: PCI 00@00:01:0
(WW) Falling back to old probe method for fglrx
(II) Loading PCS database from /etc/ati/amdpcsdb
(--) Chipset Supported AMD Graphics Processor (0x9806) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:1:1) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:1) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:21:3) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) fglrx(0): pEnt->device->identifier=0x24f7c60
(II) fglrx(0): === [xdl_x750_atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 0.1.0
    ABI class: X.Org Video Driver, version 6.0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS" "true"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB 
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
ukiDynamicMajor: failed to open /proc/ati/major
ukiDynamicMajor: failed to open /proc/ati/major
(==) fglrx(0): NoAccel = NO
(==) fglrx(0): ATI 2D Acceleration Architecture enabled
(--) fglrx(0): Chipset: "AMD Radeon HD 6320 Graphics" (Chipset = 0x9806)
(--) fglrx(0): (PciSubVendor = 0x1043, PciSubDevice = 0x1437)
(==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
(--) fglrx(0): MMIO registers at 0xfeb00000
(--) fglrx(0): I/O port at 0x0000f000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 1.1.0
    ABI class: X.Org Video Driver, version 6.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 12.36
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, AMD Technologies Inc. 
(II) fglrx(0): VESA VBE OEM Product: WRESTLER
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(--) fglrx(0): Video RAM: 393216 kByte, Type: DDR3
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(WW) fglrx(0): Hasn't establisted DRM connection
(II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x18000000)
(WW) fglrx(0): No DRM connection for driver fglrx.
(II) fglrx(0): RandR 1.2 support is enabled!
(II) fglrx(0): RandR 1.2 rotation support is enabled!
(==) fglrx(0): Center Mode is disabled 
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 1.7.7, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
(II) fglrx(0): Output DFP1 has no monitor section
(II) fglrx(0): Output CRT1 has no monitor section
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): Connected Display0: LVDS
(II) fglrx(0): Display0 EDID data ---------------------------
(II) fglrx(0): Manufacturer: CMO  Model: 1333  Serial#: 0
(II) fglrx(0): Year: 2010  Week: 32
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max Image Size [cm]: horiz.: 29  vert.: 16
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): No DPMS capabilities specified
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.584 redY: 0.349   greenX: 0.338 greenY: 0.574
(II) fglrx(0): blueX: 0.157 blueY: 0.126   whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 75.4 MHz   Image Size:  293 x 164 mm
(II) fglrx(0): h_active: 1366  h_sync: 1397  h_sync_end 1462 h_blank_end 1560 h_border: 0
(II) fglrx(0): v_active: 768  v_sync: 772  v_sync_end 784 v_blanking: 806 v_border: 0
(II) fglrx(0):  N133BGE-L41
(II) fglrx(0):  CMO
(II) fglrx(0):  N133BGE-L41
(II) fglrx(0): EDID (in hex):
(II) fglrx(0):     00ffffffffffff000daf331300000000
(II) fglrx(0):     20140103801d10780a98559559569328
(II) fglrx(0):     20505400000001010101010101010101
(II) fglrx(0):     010101010101781d56c2500026301f41
(II) fglrx(0):     4c0025a410000018000000fe004e3133
(II) fglrx(0):     334247452d4c34310a20000000fe0043
(II) fglrx(0):     4d4f20202020202020202020000000fe
(II) fglrx(0):     004e3133334247452d4c34310a20005e
(II) fglrx(0): End of Display0 EDID data --------------------
(II) fglrx(0): EDID for output LVDS
(II) fglrx(0): Manufacturer: CMO  Model: 1333  Serial#: 0
(II) fglrx(0): Year: 2010  Week: 32
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max Image Size [cm]: horiz.: 29  vert.: 16
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): No DPMS capabilities specified
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.584 redY: 0.349   greenX: 0.338 greenY: 0.574
(II) fglrx(0): blueX: 0.157 blueY: 0.126   whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 75.4 MHz   Image Size:  293 x 164 mm
(II) fglrx(0): h_active: 1366  h_sync: 1397  h_sync_end 1462 h_blank_end 1560 h_border: 0
(II) fglrx(0): v_active: 768  v_sync: 772  v_sync_end 784 v_blanking: 806 v_border: 0
(II) fglrx(0):  N133BGE-L41
(II) fglrx(0):  CMO
(II) fglrx(0):  N133BGE-L41
(II) fglrx(0): EDID (in hex):
(II) fglrx(0):     00ffffffffffff000daf331300000000
(II) fglrx(0):     20140103801d10780a98559559569328
(II) fglrx(0):     20505400000001010101010101010101
(II) fglrx(0):     010101010101781d56c2500026301f41
(II) fglrx(0):     4c0025a410000018000000fe004e3133
(II) fglrx(0):     334247452d4c34310a20000000fe0043
(II) fglrx(0):     4d4f20202020202020202020000000fe
(II) fglrx(0):     004e3133334247452d4c34310a20005e
(II) fglrx(0): EDID vendor "CMO", prod id 4915
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1366x768"x0.0   75.44  1366 1397 1462 1560  768 772 784 806 -hsync -vsync (48.4 kHz)
(II) fglrx(0): Printing probed modes for output LVDS
(II) fglrx(0): Modeline "1366x768"x60.0   75.44  1366 1397 1462 1560  768 772 784 806 -hsync -vsync (48.4 kHz)
(II) fglrx(0): Modeline "1360x768"x60.0   75.44  1360 1397 1462 1560  768 772 784 806 -hsync -vsync (48.4 kHz)
(II) fglrx(0): Modeline "1280x768"x60.0   75.44  1280 1397 1462 1560  768 772 784 806 -hsync -vsync (48.4 kHz)
(II) fglrx(0): Modeline "1280x720"x60.0   75.44  1280 1397 1462 1560  720 772 784 806 -hsync -vsync (48.4 kHz)
(II) fglrx(0): Modeline "1024x768"x60.0   75.44  1024 1397 1462 1560  768 772 784 806 -hsync -vsync (48.4 kHz)
(II) fglrx(0): Modeline "1024x600"x60.0   75.44  1024 1397 1462 1560  600 772 784 806 -hsync -vsync (48.4 kHz)
(II) fglrx(0): Modeline "800x600"x60.0   75.44  800 1397 1462 1560  600 772 784 806 -hsync -vsync (48.4 kHz)
(II) fglrx(0): Modeline "800x480"x60.0   75.44  800 1397 1462 1560  480 772 784 806 -hsync -vsync (48.4 kHz)
(II) fglrx(0): Modeline "640x480"x60.0   75.44  640 1397 1462 1560  480 772 784 806 -hsync -vsync (48.4 kHz)
(II) fglrx(0): EDID for output DFP1
(II) fglrx(0): EDID for output CRT1
(II) fglrx(0): Output LVDS connected
(II) fglrx(0): Output DFP1 disconnected
(II) fglrx(0): Output CRT1 disconnected
(II) fglrx(0): Using exact sizes for initial modes
(II) fglrx(0): Output LVDS using initial mode 1366x768
(II) fglrx(0): Display dimensions: (290, 160) mm
(II) fglrx(0): DPI set to (119, 121)
(II) fglrx(0): Adapter AMD Radeon HD 6320 Graphics has 2 configurable heads and 1 displays connected.
(==) fglrx(0):  PseudoColor visuals disabled
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) fglrx(0): NoDRI = NO
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(II) fglrx(0): Desktop Vsync is enabled.
(--) Depth 24 pixmap format is 32 bpp
(EE) fglrx(0): atiddxDriScreenInit failed, GPS not been initialized. 
(WW) fglrx(0): ***********************************************************
(WW) fglrx(0): * DRI initialization failed                               *
(WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible *
(WW) fglrx(0): * 2D and 3D acceleration disabled                         *
(WW) fglrx(0): ***********************************************************
(II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x10000000
(II) fglrx(0): FBMM initialized for area (0,0)-(1600,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1600,1600) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1600 x 6591
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(**) fglrx(0): DPMS enabled
(II) fglrx(0): Initialized in-driver Xinerama extension
(WW) fglrx(0): Textured Video not supported without DRI enabled.
(II) LoadModule: "glesx"
(II) Loading /usr/lib/xorg/modules/glesx.so
(II) Module glesx: vendor="X.Org Foundation"
    compiled for 1.4.99.906, module version = 1.0.0
(II) Loading extension GLESX
(II) fglrx(0): GLESX enableFlags = 576
(II) LoadModule: "amdxmm"
(II) Loading /usr/lib/xorg/modules/amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
    compiled for 1.4.99.906, module version = 2.0.0
(EE) fglrx(0): XMM failed to open CMMQS connection.(EE) fglrx(0): 
(EE) fglrx(0): XMM failed to initialize
(WW) fglrx(0): No XV video playback available
(II) fglrx(0): Enable composite support successfully
(WW) fglrx(0): Option "VendorName" is not used
(WW) fglrx(0): Option "ModelName" is not used
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using HW cursor of display infrastructure!
(II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
(II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
(II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
(II) fglrx(0): Framebuffer compression enabled: mcAddr=0xf009d7000 width=0x800 height=0x258
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: Screen 0 is not DRI capable
[glesx] __glESXExtensionInit: No GL ES2.0 capable screen found!
(II) fglrx(0): Setting screen physical size to 361 x 203
(II) config/udev: Adding input device Power Button (/dev/input/event5)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.7.6.901, module version = 2.3.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event5"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) config/udev: Adding input device Video Bus (/dev/input/event6)
(**) Video Bus: Applying InputClass "evdev keyboard catchall"
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) config/udev: Adding input device Power Button (/dev/input/event2)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) config/udev: Adding input device Lid Switch (/dev/input/event4)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Sleep Button (/dev/input/event3)
(**) Sleep Button: Applying InputClass "evdev keyboard catchall"
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event3"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event8)
(**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
(**) Logitech USB Optical Mouse: always reports core events
(**) Logitech USB Optical Mouse: Device: "/dev/input/event8"
(II) Logitech USB Optical Mouse: Found 3 mouse buttons
(II) Logitech USB Optical Mouse: Found scroll wheel(s)
(II) Logitech USB Optical Mouse: Found relative axes
(II) Logitech USB Optical Mouse: Found x and y relative axes
(II) Logitech USB Optical Mouse: Configuring as mouse
(**) Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE)
(II) Logitech USB Optical Mouse: initialized for relative axes.
(II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device ASUS USB2.0 WebCam (/dev/input/event9)
(**) ASUS USB2.0 WebCam: Applying InputClass "evdev keyboard catchall"
(**) ASUS USB2.0 WebCam: always reports core events
(**) ASUS USB2.0 WebCam: Device: "/dev/input/event9"
(II) ASUS USB2.0 WebCam: Found keys
(II) ASUS USB2.0 WebCam: Configuring as keyboard
(II) XINPUT: Adding extended input device "ASUS USB2.0 WebCam" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event1)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10)
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.7.6.901, module version = 1.2.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.2
(**) Option "Device" "/dev/input/event10"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
(II) Synaptics touchpad driver version 1.2.2
SynPS/2 Synaptics TouchPad no synaptics event device found
(**) Option "Device" "/dev/input/mouse2"
Query no Synaptics: 6003C8
(--) SynPS/2 Synaptics TouchPad: no supported touchpad found
(EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.
(EE) PreInit failed for input device "SynPS/2 Synaptics TouchPad"
(II) UnloadModule: "synaptics"
(II) config/udev: Adding input device PC Speaker (/dev/input/event7)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event0)
(**) Macintosh mouse button emulation: Applying InputClass "evdev pointer catchall"
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event12)
(**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
(**) ACPI Virtual Keyboard Device: always reports core events
(**) ACPI Virtual Keyboard Device: Device: "/dev/input/event12"
(II) ACPI Virtual Keyboard Device: Found keys
(II) ACPI Virtual Keyboard Device: Configuring as keyboard
(II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "pl"
(II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
Poza tym glxinfo wyświetla:

Kod: Zaznacz cały

name of display: :0.0
X Error of failed request:  BadRequest (invalid request code or no such operation)
  Major opcode of failed request:  139 (ATIFGLEXTENSION)
  Minor opcode of failed request:  66 ()
  Serial number of failed request:  13
  Current serial number in output stream:  13
Jeżeli zapomniałem coś podać, to proszę o informację.

: 07 marca 2012, 22:56
autor: fnmirk
Przedstaw jeszcze wyniki poleceń:

Kod: Zaznacz cały

dpkg -l | grep xorg
dpkg -l | grep firmware

: 07 marca 2012, 23:02
autor: button
Na pierwszy ogień proponuję odinstalować ten sterownik a następnie zainstalować wersję z repozytorium. Nie wiem jakiego Debiana używasz, ale w wersji stabilnej nie ma aktualnej wersji, trzeba instalować z wersji testowej. Po instalacji będziesz miał narzędzie amdcccle (w sumie teraz też masz, wiec zamiast od razu odinstalowywać, możesz się najpierw nim pobawić). Tam możesz się pobawić ustawieniami, wyłączenie Tear Free Desktop może przyspieszyć pulpit (przynajmniej u mnie przyspiesza).

: 08 marca 2012, 10:46
autor: gromiz

Kod: Zaznacz cały

dpkg -l | grep xorg

ii  xorg                                 1:7.5+8+squeeze1                   X.Org X Window System
ii  xorg-docs-core                       1:1.5-1                            Core documentation for the X.org X Window System
ii  xserver-xorg                         1:7.5+8+squeeze1                   the X.Org X server
ii  xserver-xorg-core                    2:1.7.7-14                         Xorg X server - core server
ii  xserver-xorg-input-all               1:7.5+8+squeeze1                   the X.Org X server -- input driver metapackage
ii  xserver-xorg-input-evdev             1:2.3.2-6                          X.Org X server -- evdev input driver
ii  xserver-xorg-input-synaptics         1.2.2-2                            Synaptics TouchPad driver for X.Org server
ii  xserver-xorg-input-wacom             0.10.5+20100416-1                  X.Org X server -- Wacom input driver
ii  xserver-xorg-video-all               1:7.5+8+squeeze1                   the X.Org X server -- output driver metapackage
ii  xserver-xorg-video-apm               1:1.2.2-2                          X.Org X server -- APM display driver
ii  xserver-xorg-video-ark               1:0.7.2-2                          X.Org X server -- ark display driver
ii  xserver-xorg-video-ati               1:6.13.1-2+squeeze1                X.Org X server -- AMD/ATI display driver wrapper
ii  xserver-xorg-video-chips             1:1.2.3-1                          X.Org X server -- Chips display driver
ii  xserver-xorg-video-cirrus            1:1.3.2-2+squeeze1                 X.Org X server -- Cirrus display driver
ii  xserver-xorg-video-fbdev             1:0.4.2-2                          X.Org X server -- fbdev display driver
ii  xserver-xorg-video-i128              1:1.3.3-2                          X.Org X server -- i128 display driver
ii  xserver-xorg-video-intel             2:2.13.0-6                         X.Org X server -- Intel i8xx, i9xx display driver
ii  xserver-xorg-video-mach64            6.8.2-3                            X.Org X server -- ATI Mach64 display driver
ii  xserver-xorg-video-mga               1:1.4.11.dfsg-4+squeeze1           X.Org X server -- MGA display driver
ii  xserver-xorg-video-neomagic          1:1.2.4-3                          X.Org X server -- Neomagic display driver
ii  xserver-xorg-video-nouveau           1:0.0.15+git20100329+7858345-5     X.Org X server -- Nouveau display driver (experimental)
ii  xserver-xorg-video-nv                1:2.1.17-3                         X.Org X server -- NV display driver
ii  xserver-xorg-video-openchrome        1:0.2.904+svn842-2                 X.Org X server -- VIA display driver
ii  xserver-xorg-video-r128              6.8.1-3                            X.Org X server -- ATI r128 display driver
ii  xserver-xorg-video-radeon            1:6.13.1-2+squeeze1                X.Org X server -- AMD/ATI Radeon display driver
ii  xserver-xorg-video-rendition         1:4.2.3-3                          X.Org X server -- Rendition display driver
ii  xserver-xorg-video-s3                1:0.6.3-2                          X.Org X server -- legacy S3 display driver
ii  xserver-xorg-video-s3virge           1:1.10.4-2                         X.Org X server -- S3 ViRGE display driver
ii  xserver-xorg-video-savage            1:2.3.1-2                          X.Org X server -- Savage display driver
ii  xserver-xorg-video-siliconmotion     1:1.7.3-2                          X.Org X server -- SiliconMotion display driver
ii  xserver-xorg-video-sis               1:0.10.3-1                         X.Org X server -- SiS display driver
ii  xserver-xorg-video-sisusb            1:0.9.3-2                          X.Org X server -- SiS USB display driver
ii  xserver-xorg-video-tdfx              1:1.4.3-2                          X.Org X server -- tdfx display driver
ii  xserver-xorg-video-trident           1:1.3.3-2                          X.Org X server -- Trident display driver
ii  xserver-xorg-video-tseng             1:1.2.3-2+squeeze1                 X.Org X server -- Tseng display driver
ii  xserver-xorg-video-vesa              1:2.3.0-3                          X.Org X server -- VESA display driver
ii  xserver-xorg-video-vmware            1:11.0.1-2                         X.Org X server -- VMware display driver
ii  xserver-xorg-video-voodoo            1:1.2.3-2                          X.Org X server -- Voodoo display driver
Polecenie:

Kod: Zaznacz cały

dpkg -l | grep firmware
nie wyświetla nic.

Wersja Debiana 6.0.4.

A jak nazywa się ta opcja po polsku w tym programie amdcccle? Przestawiałem tam opcję eliminacja zniekształceń, ale to nic nie pomagało. Ogólnie instalacja sterowników ze strony AMD nie jest zalecana? Lepiej instalować starsze z wersji testowej? W jaki sposób mogę to zrobić, ale zaznaczam, nie chcę całej wersji testowej, ponieważ z 4 dni temu instalowałem na tym laptopie tą wersje, to od razu podczas ładowania jądra powstawała sieczka na ekranie i nie wiem czym było to spowodowane. Tak więc, wolę unikać wersji testowej na tym laptopie. Chyba że wybrane elementy, ale jak to zrobić?

: 08 marca 2012, 11:47
autor: fnmirk
&quot pisze:Polecenie:

Kod: Zaznacz cały

dpkg -l | grep firmware
nie wyświetla nic.
Masz rozwiązanie. Przeszukaj repozytorium:

Kod: Zaznacz cały

apt-cache search firmware
http://www.debian.org/distrib/packages

Zainstaluj odpowiedni pakiet firmware.
Odinstaluj otwarte sterowniki związane z Twoją kartą z listy:

Kod: Zaznacz cały

dpkg -l | grep xorg

: 08 marca 2012, 14:13
autor: gromiz
Nazwa tego firmware ma być związana z ATI/AMD? Przeszukałem u mnie i nie mam nic związanego z tą kartą graficzną w repozytorium.

Może muszę dodać jakiś wpis w pliku /etc/apt/srouces.list, abym miał do tego dostęp? Obecnie w tym pliku mam wpisane:

Kod: Zaznacz cały

#~~~~~~Squeeze~~~~~~#
deb http://ftp.pl.debian.org/debian/ squeeze main non-free contrib
deb-src http://ftp.pl.debian.org/debian/ squeeze main non-free contrib
deb http://security.debian.org/ squeeze/updates main contrib non-free
deb-src http://security.debian.org/ squeeze/updates main contrib non-free
deb http://ftp.pl.debian.org/debian/ squeeze-updates main non-free contrib
deb-src http://ftp.pl.debian.org/debian/ squeeze-updates main non-free contrib

#~~~~~~Backports_Squeeze~~~~~~#
deb http://backports.debian.org/debian-backports squeeze-backports main contrib non-free

#~~~~~~Debian-multimedia~~~~~~#
deb http://www.debian-multimedia.org squeeze main non-free
deb-src http://www.debian-multimedia.org squeeze main non-free

: 08 marca 2012, 14:57
autor: fnmirk
Musisz zainstalować nowszą wersję jądra. W pakietach z backports są informacje o wsparciu dla kart z serii HD 6300.

: 08 marca 2012, 21:03
autor: gromiz
Z instalacją nowego jądra jest niestety problem. Otrzymuje taki błąd:

Kod: Zaznacz cały

apt-get install linux-image-3.2.0-0.bpo.1-amd64
Czytanie list pakietów... Gotowe
Budowanie drzewa zależności       
Odczyt informacji o stanie... Gotowe
Nie udało się zainstalować niektórych pakietów. Może to oznaczać,
że zażądano niemożliwej sytuacji lub używasz dystrybucji niestabilnej,
w której niektóre pakiety nie zostały jeszcze utworzone lub przeniesione
z katalogu Incoming ("Przychodzące").
Następujące informacje mogą pomóc rozwiązać sytuację:

Następujące pakiety mają niespełnione zależności:
 linux-image-3.2.0-0.bpo.1-amd64 : Wymaga: linux-base (>= 3~) ale 2.6.32-41 ma zostać zainstalowany
                                   Poleca: firmware-linux-free (>= 3~) ale nie zostanie zainstalowany
                                   Psuje: initramfs-tools (< 0.99~) ale 0.98.8 ma zostać zainstalowany
E: Pakiety są uszkodzone
Z tego co widzę mogę tylko instalować wersję 3.2, ale skąd otrzymać linux-base w wersji większej niż 3.0? W repozytorium nie jest dostępne.

Edycja:
Jądro już zainstalowałem. Okazało się, że używając apt-get jądro się nie instalowało. Użyłem aptitude i instalacja przebiegła poprawnie, instalując zależności. Nie wiem dlaczego apt-get tych zależności nie znajdował. Ważne, że jądro już jest. Teraz dalej będę walczył ze sterownikami ATI.

Edycja2:
Po instalacji jądra 3.2 przeinstalowałem ponownie sterowniki ATI z tego pliku, który pobrałem kilka dni temu z serwera AMD. Po instalacji wykonałem polecenie:

Kod: Zaznacz cały

aticonfig --initial
oraz zrestartowałem system. Działa bez problemu. Smużenie okien, spowalnianie znikło. Glxinfo wyświetla informacje. W ustawieniach amdcccle pokazało się więcej ustawień itp. Działa wszystko świetnie, ale został jeden mankament.

Wcześniej zainstalowałem na jądrze 2.6 pakiet laptop-mode-tools. Automatycznie zmieniał mi jasność ekranu na 50% podczas uruchamiania. Wpisywał do tego pliku odpowiednią wartość:

Kod: Zaznacz cały

/proc/acpi/video/VGA/LCDD/brightness
Obecnie ten plik na nowym jądrze znikł (pewnie dlatego, że nie ładują się już sterowniki otwarte). Nie ma nigdzie możliwości wpisywania nowej wartości jasności. Jak można to ustawić obecnie?

Ogólnie bardzo dziękuję za pomoc. Wszystkie porady pomogły i jest świetnie. Mam jeszcze problem z kwestią dźwięku, ale to już w innym temacie zadam pytanie jutro.

: 09 marca 2012, 01:50
autor: fnmirk
&quot pisze:Wcześniej zainstalowałem na jądrze 2.6 pakiet laptop-mode-tools. Automatycznie zmieniał mi jasność ekranu na 50% podczas uruchamiania. Wpisywał do tego pliku odpowiednią wartość:
Można spróbować zainstalować pakiet z wersji testowej.
http://packages.debian.org/search?keywo ... lla-search
Strefa czasowa UTC+02:00
Strona 1 z 1

Technologię dostarcza phpBB® Forum Software © phpBB Limited

Polski pakiet językowy dostarcza phpBB.pl