Polski portal użytkowników dystrybucji Debian GNU/Linux, dyskusje, artykuły, nowości, blog, porady, pomoc.
https://www.debian.pl/
Kod: Zaznacz cały
dmesgKod: Zaznacz cały
dmesgKod: Zaznacz cały
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-35) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Jun 13 04:13:06 UTC 2011
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfffa000 (usable)
[ 0.000000] BIOS-e820: 00000000bfffa000 - 00000000c0000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0xbfffa max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0F5E00000 mask FFFE00000 uncachable
[ 0.000000] 1 base 0F6000000 mask FFE000000 uncachable
[ 0.000000] 2 base 0F8000000 mask FF8000000 uncachable
[ 0.000000] 3 base 000003000 mask FFFFFF000 uncachable
[ 0.000000] 4 base 000004000 mask FFFFFF000 uncachable
[ 0.000000] 5 base 000005000 mask FFFFFF000 uncachable
[ 0.000000] 6 base 000006000 mask FFFFFF000 uncachable
[ 0.000000] 7 base 000007000 mask FFFFFF000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00373fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 7000-d000
[ 0.000000] RAMDISK: 3779c000 - 37fefc13
[ 0.000000] Allocated new RAMDISK: 00100000 - 00953c13
[ 0.000000] Move RAMDISK from 000000003779c000 - 0000000037fefc12 to 00100000 - 00953c12
[ 0.000000] ACPI: RSDP 000f4f70 00014 (v00 COMPAQ)
[ 0.000000] ACPI: RSDT bfffa000 00030 (v01 COMPAQ P30 00000002 Ň? 0000162E)
[ 0.000000] ACPI: FACP bfffa040 00074 (v01 COMPAQ P30 00000002 Ň? 0000162E)
[ 0.000000] ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20090903/tbfadt-607)
[ 0.000000] ACPI Warning: Invalid length for Pm1bControlBlock: 32, using default 16 (20090903/tbfadt-607)
[ 0.000000] ACPI: DSDT bfffa240 03C33 (v01 COMPAQ DSDT 00000001 MSFT 0100000B)
[ 0.000000] ACPI: FACS bfffa0c0 00040
[ 0.000000] ACPI: APIC bfffa100 000AC (v01 COMPAQ 00000083 00000002 00000000)
[ 0.000000] ACPI: SPCR bfffa1c0 00050 (v01 COMPAQ SPCRRBSU 00000001 Ň? 0000162E)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2187MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000
[ 0.000000] node 0 low ram: 00000000 - 373fe000
[ 0.000000] node 0 bootmap 00009000 - 0000fe80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014c8bb4] TEXT DATA BSS ==> [0001000000 - 00014c8bb4]
[ 0.000000] #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
[ 0.000000] #5 [00014c9000 - 00014cf039] BRK ==> [00014c9000 - 00014cf039]
[ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
[ 0.000000] #7 [0000100000 - 0000953c13] NEW RAMDISK ==> [0000100000 - 0000953c13]
[ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
[ 0.000000] found SMP MP-table at [c00f4fd0] f4fd0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x000bfffa
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bfffa
[ 0.000000] On node 0 totalpages: 786329
[ 0.000000] free_area_init_node: node 0, pgdat c13b08a0, node_mem_map c14d1000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3967 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4376 pages used for memmap
[ 0.000000] HighMem zone: 555748 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x920
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-15
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[16])
[ 0.000000] IOAPIC[1]: apic_id 9, version 17, address 0xfec01000, GSI 16-31
[ 0.000000] ACPI: IOAPIC (id[0x0a] address[0xfec02000] gsi_base[32])
[ 0.000000] IOAPIC[2]: apic_id 10, version 17, address 0xfec02000, GSI 32-47
[ 0.000000] ACPI: IOAPIC (id[0x0b] address[0xfec03000] gsi_base[48])
[ 0.000000] IOAPIC[3]: apic_id 11, version 17, address 0xfec03000, GSI 48-63
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 64
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c3000000 s34328 r0 d23016 u524288
[ 0.000000] pcpu-alloc: s34328 r0 d23016 u524288 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780185
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=84d403d0-ac71-4ba1-ae3d-ea439e31b346 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000373fe:000bfffa)
[ 0.000000] Memory: 3104584k/3145704k available (2504k kernel code, 39376k reserved, 1313k data, 380k init, 2240496k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.000000] .init : 0xc13bb000 - 0xc141a000 ( 380 kB)
[ 0.000000] .data : 0xc1272001 - 0xc13ba4c0 (1313 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1272001 (2504 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2690.773 MHz processor.
[ 0.008010] Calibrating delay loop (skipped), value calculated using timer frequency.. 5381.54 BogoMIPS (lpj=10763092)
[ 0.008035] Security Framework initialized
[ 0.008045] SELinux: Disabled at boot.
[ 0.008057] Mount-cache hash table entries: 512
[ 0.008291] Initializing cgroup subsys ns
[ 0.008297] Initializing cgroup subsys cpuacct
[ 0.008303] Initializing cgroup subsys devices
[ 0.008308] Initializing cgroup subsys freezer
[ 0.008311] Initializing cgroup subsys net_cls
[ 0.008348] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.008352] CPU: L2 cache: 512K
[ 0.008354] CPU: L3 cache: 2048K
[ 0.008358] CPU: Physical Processor ID: 2
[ 0.008360] CPU: Processor Core ID: 0
[ 0.008365] mce: CPU supports 4 MCE banks
[ 0.008379] CPU0: Thermal monitoring enabled (TM1)
[ 0.008398] Performance Events: no PMU driver, software events only.
[ 0.008407] Checking 'hlt' instruction... OK.
[ 0.025491] ACPI: Core revision 20090903
[ 0.033065] Enabling APIC mode: Flat. Using 4 I/O APICs
[ 0.033894] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.073576] CPU0: Intel(R) Xeon(TM) MP CPU 2.70GHz stepping 06
[ 0.076001] Booting processor 1 APIC 0x6 ip 0x6000
[ 0.012000] Initializing CPU#1
[ 0.012000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.012000] CPU: L2 cache: 512K
[ 0.012000] CPU: L3 cache: 2048K
[ 0.012000] CPU: Physical Processor ID: 3
[ 0.012000] CPU: Processor Core ID: 0
[ 0.012000] CPU1: Thermal monitoring enabled (TM1)
[ 0.160108] CPU1: Intel(R) Xeon(TM) MP CPU 2.70GHz stepping 06
[ 0.160121] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.164277] Booting processor 2 APIC 0x5 ip 0x6000
[ 0.012000] Initializing CPU#2
[ 0.012000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.012000] CPU: L2 cache: 512K
[ 0.012000] CPU: L3 cache: 2048K
[ 0.012000] CPU: Physical Processor ID: 2
[ 0.012000] CPU: Processor Core ID: 0
[ 0.012000] CPU2: Thermal monitoring enabled (TM1)
[ 0.252130] CPU2: Intel(R) Xeon(TM) MP CPU 2.70GHz stepping 06
[ 0.252144] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.256281] Booting processor 3 APIC 0x7 ip 0x6000
[ 0.012000] Initializing CPU#3
[ 0.012000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.012000] CPU: L2 cache: 512K
[ 0.012000] CPU: L3 cache: 2048K
[ 0.012000] CPU: Physical Processor ID: 3
[ 0.012000] CPU: Processor Core ID: 0
[ 0.012000] CPU3: Thermal monitoring enabled (TM1)
[ 0.344115] CPU3: Intel(R) Xeon(TM) MP CPU 2.70GHz stepping 06
[ 0.344126] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.348120] Brought up 4 CPUs
[ 0.348125] Total of 4 processors activated (21530.28 BogoMIPS).
[ 0.350420] CPU0 attaching sched-domain:
[ 0.350427] domain 0: span 0,2 level SIBLING
[ 0.350431] groups: 0 (cpu_power = 589) 2 (cpu_power = 589)
[ 0.350439] domain 1: span 0,2 level MC
[ 0.350443] groups: 0,2 (cpu_power = 1178)
[ 0.350449] domain 2: span 0-3 level CPU
[ 0.350452] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
[ 0.350464] CPU1 attaching sched-domain:
[ 0.350466] domain 0: span 1,3 level SIBLING
[ 0.350470] groups: 1 (cpu_power = 589) 3 (cpu_power = 589)
[ 0.350477] domain 1: span 1,3 level MC
[ 0.350481] groups: 1,3 (cpu_power = 1178)
[ 0.350486] domain 2: span 0-3 level CPU
[ 0.350490] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
[ 0.350499] CPU2 attaching sched-domain:
[ 0.350502] domain 0: span 0,2 level SIBLING
[ 0.350505] groups: 2 (cpu_power = 589) 0 (cpu_power = 589)
[ 0.350513] domain 1: span 0,2 level MC
[ 0.350516] groups: 0,2 (cpu_power = 1178)
[ 0.350522] domain 2: span 0-3 level CPU
[ 0.350525] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
[ 0.350534] CPU3 attaching sched-domain:
[ 0.350537] domain 0: span 1,3 level SIBLING
[ 0.350540] groups: 3 (cpu_power = 589) 1 (cpu_power = 589)
[ 0.350548] domain 1: span 1,3 level MC
[ 0.350551] groups: 1,3 (cpu_power = 1178)
[ 0.350557] domain 2: span 0-3 level CPU
[ 0.350560] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
[ 0.350846] devtmpfs: initialized
[ 0.350846] regulator: core version 0.5
[ 0.352033] NET: Registered protocol family 16
[ 0.352159] ACPI: bus type pci registered
[ 0.365656] PCI: PCI BIOS revision 2.10 entry at 0xf0094, last bus=9
[ 0.365659] PCI: Using configuration type 1 for base access
[ 0.365711] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.365714] mtrr: probably your BIOS does not setup all CPUs.
[ 0.365716] mtrr: corrected configuration.
[ 0.366130] bio: create slab <bio-0> at 0
[ 0.366130] ACPI: EC: Look up EC in DSDT
[ 0.373877] ACPI: Interpreter enabled
[ 0.373881] ACPI: (supports S0 S4 S5)
[ 0.373902] ACPI: Using IOAPIC for interrupt routing
[ 0.379535] ACPI: No dock devices found.
[ 0.380083] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.380247] pci 0000:00:03.0: reg 10 32bit mmio: [0xf6000000-0xf6ffffff]
[ 0.380257] pci 0000:00:03.0: reg 14 io port: [0x2400-0x24ff]
[ 0.380266] pci 0000:00:03.0: reg 18 32bit mmio: [0xf5ff0000-0xf5ff0fff]
[ 0.380292] pci 0000:00:03.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.380316] pci 0000:00:03.0: supports D1 D2
[ 0.380356] pci 0000:00:04.0: reg 10 io port: [0x1800-0x18ff]
[ 0.380365] pci 0000:00:04.0: reg 14 32bit mmio: [0xf5fe0000-0xf5fe01ff]
[ 0.380453] pci 0000:00:04.2: reg 10 io port: [0x2800-0x28ff]
[ 0.380463] pci 0000:00:04.2: reg 14 32bit mmio: [0xf5fd0000-0xf5fd07ff]
[ 0.380473] pci 0000:00:04.2: reg 18 32bit mmio: [0xf5fc0000-0xf5fc1fff]
[ 0.380482] pci 0000:00:04.2: reg 1c 32bit mmio: [0xf5f00000-0xf5f7ffff]
[ 0.380503] pci 0000:00:04.2: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[ 0.380528] pci 0000:00:04.2: PME# supported from D0 D3hot D3cold
[ 0.380534] pci 0000:00:04.2: PME# disabled
[ 0.380638] pci 0000:00:0f.1: reg 10 io port: [0x1f0-0x1f7]
[ 0.380646] pci 0000:00:0f.1: reg 14 io port: [0x3f4-0x3f7]
[ 0.380655] pci 0000:00:0f.1: reg 18 io port: [0x170-0x177]
[ 0.380663] pci 0000:00:0f.1: reg 1c io port: [0x374-0x377]
[ 0.380672] pci 0000:00:0f.1: reg 20 io port: [0x2000-0x200f]
[ 0.380713] pci 0000:00:0f.2: reg 10 32bit mmio: [0xf5ef0000-0xf5ef0fff]
[ 0.381055] pci_bus 0000:00: on NUMA node 0
[ 0.381061] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.382738] ACPI: PCI Root Bridge [PCI1] (0000:01)
[ 0.382822] pci 0000:01:03.0: reg 10 64bit mmio: [0xf7ec0000-0xf7efffff]
[ 0.382830] pci 0000:01:03.0: reg 18 io port: [0x3000-0x30ff]
[ 0.382842] pci 0000:01:03.0: reg 1c 64bit mmio pref: [0xf7df0000-0xf7df3fff]
[ 0.382854] pci 0000:01:03.0: reg 30 32bit mmio pref: [0x000000-0x003fff]
[ 0.382880] pci 0000:01:03.0: supports D1
[ 0.382923] pci_bus 0000:01: on NUMA node 0
[ 0.382928] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
[ 0.383369] ACPI: PCI Root Bridge [PCI2] (0000:02)
[ 0.383452] pci 0000:02:01.0: reg 10 64bit mmio: [0xf7ff0000-0xf7ffffff]
[ 0.383479] pci 0000:02:01.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[ 0.383506] pci 0000:02:01.0: PME# supported from D3hot D3cold
[ 0.383512] pci 0000:02:01.0: PME# disabled
[ 0.383569] pci 0000:02:02.0: reg 10 64bit mmio: [0xf7fe0000-0xf7feffff]
[ 0.383595] pci 0000:02:02.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[ 0.383623] pci 0000:02:02.0: PME# supported from D3hot D3cold
[ 0.383628] pci 0000:02:02.0: PME# disabled
[ 0.383673] pci_bus 0000:02: on NUMA node 0
[ 0.383678] ACPI: PCI Interrupt Routing Table [\_SB_.PCI2._PRT]
[ 0.384103] ACPI: PCI Root Bridge [PCI3] (0000:03)
[ 0.384171] pci_bus 0000:03: on NUMA node 0
[ 0.384175] ACPI: PCI Interrupt Routing Table [\_SB_.PCI3._PRT]
[ 0.384545] ACPI: PCI Root Bridge [PCI4] (0000:06)
[ 0.384614] pci_bus 0000:06: on NUMA node 0
[ 0.384619] ACPI: PCI Interrupt Routing Table [\_SB_.PCI4._PRT]
[ 0.384864] ACPI: PCI Interrupt Link [IUSB] (IRQs 4 5 *7 10 11 15)
[ 0.385029] ACPI: PCI Interrupt Link [IN16] (IRQs 4 5 7 10 11 15) *3
[ 0.385192] ACPI: PCI Interrupt Link [IN17] (IRQs 4 *5 7 10 11 15)
[ 0.385356] ACPI: PCI Interrupt Link [IN18] (IRQs 4 5 7 10 11 15) *0, disabled.
[ 0.385518] ACPI: PCI Interrupt Link [IN19] (IRQs 4 5 7 10 11 15) *0, disabled.
[ 0.385681] ACPI: PCI Interrupt Link [IN20] (IRQs 4 5 7 10 11 15) *0, disabled.
[ 0.385844] ACPI: PCI Interrupt Link [IN21] (IRQs 4 5 7 10 11 15) *0, disabled.
[ 0.386007] ACPI: PCI Interrupt Link [IN22] (IRQs 4 5 7 10 11 15) *0, disabled.
[ 0.386174] ACPI: PCI Interrupt Link [IN23] (IRQs 4 5 7 10 11 *15)
[ 0.386337] ACPI: PCI Interrupt Link [IN24] (IRQs 4 5 7 10 11 15) *0, disabled.
[ 0.386500] ACPI: PCI Interrupt Link [IN25] (IRQs 4 5 7 10 11 15) *0, disabled.
[ 0.386663] ACPI: PCI Interrupt Link [IN26] (IRQs 4 5 7 10 11 15) *0, disabled.
[ 0.386826] ACPI: PCI Interrupt Link [IN27] (IRQs 4 5 7 10 11 15) *0, disabled.
[ 0.386993] ACPI: PCI Interrupt Link [IN28] (IRQs 4 5 7 10 11 15) *0, disabled.
[ 0.387157] ACPI: PCI Interrupt Link [IN29] (IRQs 4 5 7 10 11 15) *0, disabled.
[ 0.387320] ACPI: PCI Interrupt Link [IN30] (IRQs 4 5 7 *10 11 15)
[ 0.387483] ACPI: PCI Interrupt Link [IN31] (IRQs 4 5 7 10 *11 15)
[ 0.387646] ACPI: PCI Interrupt Link [IN32] (IRQs 4 5 7 10 11 15) *0, disabled.
[ 0.387810] ACPI: PCI Interrupt Link [IN33] (IRQs 4 5 7 10 11 15) *0, disabled.
[ 0.387974] ACPI: PCI Interrupt Link [IN34] (IRQs 4 5 7 10 11 15) *0, disabled.
[ 0.388136] vgaarb: device added: PCI:0000:00:03.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.388153] vgaarb: loaded
[ 0.388178] PCI: Using ACPI for IRQ routing
[ 0.388419] Switching to clocksource tsc
[ 0.390021] pnp: PnP ACPI init
[ 0.390055] ACPI: bus type pnp registered
[ 0.394249] pnp: PnP ACPI: found 13 devices
[ 0.394253] ACPI: ACPI bus type pnp unregistered
[ 0.394257] PnPBIOS: Disabled by ACPI PNP
[ 0.394273] system 00:01: ioport range 0xf50-0xf58 has been reserved
[ 0.394278] system 00:01: ioport range 0x408-0x40f has been reserved
[ 0.394282] system 00:01: ioport range 0x900-0x903 has been reserved
[ 0.394287] system 00:01: ioport range 0x910-0x911 has been reserved
[ 0.394291] system 00:01: ioport range 0x920-0x923 has been reserved
[ 0.394295] system 00:01: ioport range 0x930-0x937 has been reserved
[ 0.394299] system 00:01: ioport range 0x940-0x947 has been reserved
[ 0.394303] system 00:01: ioport range 0x950-0x957 has been reserved
[ 0.394308] system 00:01: ioport range 0xc06-0xc08 has been reserved
[ 0.394312] system 00:01: ioport range 0xc14-0xc14 has been reserved
[ 0.394316] system 00:01: ioport range 0xc49-0xc4a has been reserved
[ 0.394320] system 00:01: ioport range 0xc50-0xc52 has been reserved
[ 0.394324] system 00:01: ioport range 0xc6c-0xc6f has been reserved
[ 0.394329] system 00:01: ioport range 0x230-0x233 has been reserved
[ 0.394333] system 00:01: ioport range 0x260-0x267 has been reserved
[ 0.394337] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.394341] system 00:01: ioport range 0x700-0x70f has been reserved
[ 0.394346] system 00:01: ioport range 0x800-0x81f has been reserved
[ 0.394350] system 00:01: ioport range 0xc80-0xc83 has been reserved
[ 0.394354] system 00:01: ioport range 0xcd4-0xcd7 has been reserved
[ 0.394359] system 00:01: ioport range 0xcf9-0xcf9 could not be reserved
[ 0.429329] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.429333] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.429337] pci_bus 0000:01: resource 0 io: [0x00-0xffff]
[ 0.429341] pci_bus 0000:01: resource 1 mem: [0x000000-0xffffffff]
[ 0.429345] pci_bus 0000:02: resource 0 io: [0x00-0xffff]
[ 0.429349] pci_bus 0000:02: resource 1 mem: [0x000000-0xffffffff]
[ 0.429353] pci_bus 0000:03: resource 0 io: [0x00-0xffff]
[ 0.429356] pci_bus 0000:03: resource 1 mem: [0x000000-0xffffffff]
[ 0.429360] pci_bus 0000:06: resource 0 io: [0x00-0xffff]
[ 0.429364] pci_bus 0000:06: resource 1 mem: [0x000000-0xffffffff]
[ 0.429410] NET: Registered protocol family 2
[ 0.429556] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.430044] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.430690] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.431061] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.431064] TCP reno registered
[ 0.431245] NET: Registered protocol family 1
[ 0.431279] pci 0000:00:03.0: Boot video device
[ 0.447588] Unpacking initramfs...
[ 0.775470] Freeing initrd memory: 8527k freed
[ 0.786718] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.787105] audit: initializing netlink socket (disabled)
[ 0.787131] type=2000 audit(1315052489.783:1): initialized
[ 0.790496] highmem bounce pool size: 64 pages
[ 0.790504] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.792942] VFS: Disk quotas dquot_6.5.2
[ 0.793023] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.793136] msgmni has been set to 1706
[ 0.793597] alg: No test for stdrng (krng)
[ 0.793676] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.793681] io scheduler noop registered
[ 0.793684] io scheduler anticipatory registered
[ 0.793686] io scheduler deadline registered
[ 0.793736] io scheduler cfq registered (default)
[ 0.793958] isapnp: Scanning for PnP cards...
[ 1.104642] isapnp: No Plug & Play device found
[ 1.106570] Linux agpgart interface v0.103
[ 1.106824] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.106944] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.107365] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.107605] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[ 1.109293] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.109303] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.109469] mice: PS/2 mouse device common for all mice
[ 1.109564] rtc_cmos rtc_cmos: RTC can wake from S4
[ 1.109617] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 1.109653] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 1.109667] cpuidle: using governor ladder
[ 1.109670] cpuidle: using governor menu
[ 1.109676] No iBFT detected.
[ 1.110276] TCP cubic registered
[ 1.110437] NET: Registered protocol family 10
[ 1.111646] Mobile IPv6
[ 1.111650] NET: Registered protocol family 17
[ 1.111672] Using IPI No-Shortcut mode
[ 1.111787] PM: Resume from disk failed.
[ 1.111803] registered taskstats version 1
[ 1.112183] rtc_cmos rtc_cmos: setting system clock to 2011-09-03 12:21:31 UTC (1315052491)
[ 1.112220] Initalizing network drop monitor service
[ 1.112260] Freeing unused kernel memory: 380k freed
[ 1.112683] Write protecting the kernel text: 2508k
[ 1.112721] Write protecting the kernel read-only data: 904k
[ 1.138272] udev[76]: starting version 164
[ 1.155744] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.232845] SCSI subsystem initialized
[ 1.247497] Floppy drive(s): fd0 is 1.44M
[ 1.249233] tg3.c:v3.102 (September 1, 2009)
[ 1.249291] tg3 0000:02:01.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31
[ 1.269146] usbcore: registered new interface driver usbfs
[ 1.269204] usbcore: registered new interface driver hub
[ 1.269652] usbcore: registered new device driver usb
[ 1.275005] HP CISS Driver (v 3.6.20)
[ 1.275508] cciss 0000:01:03.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30
[ 1.278594] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.278608] ACPI: Thermal Zone [THM0] (8 C)
[ 1.288346] eth0: Tigon3 [partno(NA) rev 1002] (PCIX:100MHz:64-bit) MAC address 00:12:79:d6:fb:af
[ 1.288352] eth0: attached PHY is 5703 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 1.288356] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.288359] eth0: dma_rwctrl[769c4000] dma_mask[64-bit]
[ 1.288390] tg3 0000:02:02.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.306742] libata version 3.00 loaded.
[ 1.307501] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.311416] scsi0 : pata_serverworks
[ 1.311709] scsi1 : pata_serverworks
[ 1.311866] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x2000 irq 14
[ 1.311872] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x2008 irq 15
[ 1.313514] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.313896] ACPI: PCI Interrupt Link [IUSB] enabled at IRQ 11
[ 1.313907] ohci_hcd 0000:00:0f.2: PCI INT A -> Link[IUSB] -> GSI 11 (level, low) -> IRQ 11
[ 1.313928] ohci_hcd 0000:00:0f.2: OHCI Host Controller
[ 1.313960] ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1
[ 1.313989] ohci_hcd 0000:00:0f.2: irq 11, io mem 0xf5ef0000
[ 1.335084] eth1: Tigon3 [partno(NA) rev 1002] (PCIX:100MHz:64-bit) MAC address 00:12:79:d6:fb:b0
[ 1.335089] eth1: attached PHY is 5703 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 1.335094] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.335098] eth1: dma_rwctrl[769c4000] dma_mask[64-bit]
[ 1.339453] IRQ 30/cciss0: IRQF_DISABLED is not guaranteed on shared IRQs
[ 1.339488] cciss0: <0xb178> at PCI 0000:01:03.0 IRQ 30 using DAC
[ 1.342488] cciss/c0d0: p1 p2 < p5 >
[ 1.370535] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.370541] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.370545] usb usb1: Product: OHCI Host Controller
[ 1.370548] usb usb1: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
[ 1.370551] usb usb1: SerialNumber: 0000:00:0f.2
[ 1.370679] usb usb1: configuration #1 chosen from 1 choice
[ 1.370742] hub 1-0:1.0: USB hub found
[ 1.370762] hub 1-0:1.0: 4 ports detected
[ 1.588649] ata1.00: ATAPI: COMPAQ CD-ROM SN-124, N104, max PIO4
[ 1.604416] ata1.00: configured for PIO4
[ 1.605082] scsi 0:0:0:0: CD-ROM COMPAQ CD-ROM SN-124 N104 PQ: 0 ANSI: 5
[ 1.704022] usb 1-3: new full speed USB device using ohci_hcd and address 2
[ 1.779783] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 1.779788] Uniform CD-ROM driver Revision: 3.20
[ 1.779965] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.788015] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.884546] usb 1-3: New USB device found, idVendor=041e, idProduct=4052
[ 1.884551] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.884555] usb 1-3: Product: Creative Live! Cam Vista IM
[ 1.884558] usb 1-3: Manufacturer:
[ 1.884677] usb 1-3: configuration #1 chosen from 1 choice
[ 4.264102] floppy0: no floppy controllers found
[ 4.329576] PM: Starting manual resume from disk
[ 4.329581] PM: Resume from partition 104:5
[ 4.329584] PM: Checking hibernation image.
[ 4.329775] PM: Error -22 checking image file
[ 4.329778] PM: Resume from disk failed.
[ 4.351343] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 4.351347] EXT3-fs: write access will be enabled during recovery.
[ 8.931742] kjournald starting. Commit interval 5 seconds
[ 8.931762] EXT3-fs: recovery complete.
[ 8.932070] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.728702] udev[313]: starting version 164
[ 11.043780] processor LNXCPU:04: registered as cooling_device0
[ 11.043858] processor LNXCPU:05: registered as cooling_device1
[ 11.043937] processor LNXCPU:06: registered as cooling_device2
[ 11.044016] processor LNXCPU:07: registered as cooling_device3
[ 11.047725] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 11.049704] hpilo 0000:00:04.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 11.060539] hpwdt 0000:00:04.0: This server does not have an iLO2 ASIC.
[ 11.063250] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 11.063332] ACPI: Power Button [PWRF]
[ 11.080510] Floppy drive(s): fd0 is 1.44M
[ 11.193061] piix4_smbus 0000:00:0f.0: SMBus Host Controller at 0x700, revision 0
[ 11.614623] Error: Driver 'pcspkr' is already registered, aborting...
[ 11.711351] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input3
[ 11.725501] Linux video capture interface: v2.00
[ 11.729376] gspca: main v2.7.0 registered
[ 11.731691] gspca: probing 041e:4052
[ 11.966712] ov519: I2C synced in 0 attempt(s)
[ 11.966716] ov519: starting OV7xx0 configuration
[ 12.002710] ov519: Sensor is an OV7670
[ 14.096108] floppy0: no floppy controllers found
[ 14.190790] Floppy drive(s): fd0 is 1.44M
[ 14.573839] gspca: probe ok
[ 14.573890] usbcore: registered new interface driver ov519
[ 14.573897] ov519: registered
[ 17.204123] floppy0: no floppy controllers found
[ 17.583170] Adding 2927608k swap on /dev/cciss/c0d0p5. Priority:-1 extents:1 across:2927608k
[ 17.793096] EXT3 FS on cciss/c0d0p1, internal journal
[ 17.926077] loop: module loaded
[ 18.837062] tg3 0000:02:01.0: firmware: requesting tigon/tg3_tso.bin
[ 19.131466] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.735261] tg3: eth0: Link is up at 100 Mbps, full duplex.
[ 20.735266] tg3: eth0: Flow control is on for TX and on for RX.
[ 20.735526] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 21.146337] vboxdrv: Found 4 processor cores.
[ 21.146797] vboxdrv: fAsync=0 offMin=0xc58 offMax=0x2e4e
[ 21.147180] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 21.147186] vboxdrv: Successfully loaded version 4.1.2 (interface 0x00190000).
[ 21.411458] vboxpci: IOMMU not found (not compiled)
[ 31.384012] eth0: no IPv6 routers present
[/QUOTE]
lspci -k
[quote]00:00.0 Host bridge: Broadcom CMIC-WS Host Bridge (GC-LE chipset) (rev 13)
00:00.1 Host bridge: Broadcom CMIC-WS Host Bridge (GC-LE chipset)
00:00.2 Host bridge: Broadcom CMIC-LE
00:03.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
Subsystem: Compaq Computer Corporation Proliant Rage XL
00:04.0 System peripheral: Compaq Computer Corporation Integrated Lights Out Controller (rev 01)
Subsystem: Compaq Computer Corporation Device b206
00:04.2 System peripheral: Compaq Computer Corporation Integrated Lights Out Processor (rev 01)
Subsystem: Compaq Computer Corporation Device b206
Kernel driver in use: hpilo
00:0f.0 ISA bridge: Broadcom CSB5 South Bridge (rev 93)
Subsystem: Broadcom CSB5 South Bridge
Kernel driver in use: piix4_smbus
00:0f.1 IDE interface: Broadcom CSB5 IDE Controller (rev 93)
Subsystem: Broadcom CSB5 IDE Controller
Kernel driver in use: pata_serverworks
00:0f.2 USB Controller: Broadcom OSB4/CSB5 OHCI USB Controller (rev 05)
Subsystem: Broadcom OSB4/CSB5 OHCI USB Controller
Kernel driver in use: ohci_hcd
00:0f.3 Host bridge: Broadcom CSB5 LPC bridge
Subsystem: Broadcom Device 0230
00:10.0 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 05)
00:10.2 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 05)
00:11.0 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 05)
00:11.2 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 05)
01:03.0 RAID bus controller: Compaq Computer Corporation Smart Array 5i/532 (rev 01)
Subsystem: Compaq Computer Corporation Smart Array 5i
Kernel driver in use: cciss
02:01.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5703X Gigabit Ethernet (rev 02)
Subsystem: Compaq Computer Corporation NC7781 Gigabit Server Adapter (PCI-X, 10,100,1000-T)
Kernel driver in use: tg3
02:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5703X Gigabit Ethernet (rev 02)
Subsystem: Compaq Computer Corporation NC7781 Gigabit Server Adapter (PCI-X, 10,100,1000-T)
Kernel driver in use: tg3
Kod: Zaznacz cały
fsck /dev/cciss/c0d0