Strona 1 z 1
[+] Montowanie dysku zewnętrznego przez USB
: 06 września 2010, 13:28
autor: cooleq
Witam.
Raczej prosty problem, ale nie mogę sobie poradzić. Muszę skopiować zawartość dysku, przed oddaniem go do naprawy, a nie mogę go podłączyć ponieważ nie widzi go jako urządzenia sda.
Polecenie:
Kod: Zaznacz cały
Heimdall:/# lsusb
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 004: ID 1058:1110 Western Digital Technologies, Inc.
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Mam 4 dyski więc sprawdzam kolejny podłączony na usb:
Kod: Zaznacz cały
Heimdall:/# fdisk /dev/sda5
Unable to open /dev/sda5
Sprawdzam hal:
Kod: Zaznacz cały
Heimdall:/# invoke-rc.d hal start
Starting Hardware abstraction layer: hald/usr/sbin/hald already running.
Niby wszystko w porządku tylko, że się nie podłącza jako sda, za to jest na liście urządzeń usb.
Jakieś pomysły?
: 06 września 2010, 13:53
autor: fnmirk
" pisze:nie mogę go podłączyć ponieważ nie widzi go jako urządzenia sda.
A dlaczego się uparłeś, że musi być widoczny jako sda?
Podepnij dysk i przedstaw wynik polecenia:
: 06 września 2010, 15:09
autor: cooleq
Tak szukałem bo tak wyczytałem, że się dyski usb rozpoznaje.
Proszę:
Kod: Zaznacz cały
[1;50r[0;10m[4l[?7h[?25h[?0c[39;49m[39;49m[0;10m[H[J[0;10;7m GNU nano 2.0.7 File: dead.letter [48;79H[ Nowy plik ]
[49d^G[0;10m Pomoc[49;29H[0;10;7m^O[0;10m Zapisz[49;57H[0;10;7m^R[0;10m Wczytaj plik[49;85H[0;10;7m^Y[0;10m Poprz.str.[49;113H[0;10;7m^K[0;10m Wytnij[49;141H[0;10;7m^C[0;10m Bież.poz.
[50d[0;10;7m^X[0;10m Wyjdź[50;29H[0;10;7m^J[0;10m Wyjustuj[50;57H[0;10;7m^W[0;10m Wyszukaj[50;85H[0;10;7m^V[0;10m Nast.str.[50;113H[0;10;7m^U[0;10m UnCut Text[50;141H[0;10;7m^T[0;10m Pisownia
[3d[49d[J[50;169H[50;1H
[240027.196814] disk 0, o:1, dev:sda4
[240027.196814] disk 1, o:1, dev:sdb4
[240027.196814] disk 2, o:1, dev:sdc4
[240027.196814] disk 3, o:1, dev:sdd4
[363424.332886] usb 2-1.3: new high speed USB device using ehci_hcd and address 3
[363424.427626] usb 2-1.3: configuration #1 chosen from 1 choice
[363424.427626] usb 2-1.3: New USB device found, idVendor=1058, idProduct=1110
[363424.427626] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[363424.427626] usb 2-1.3: Product: My Book 1110
[363424.427626] usb 2-1.3: Manufacturer: Western Digital
[363424.427626] usb 2-1.3: SerialNumber: 574341563534323231343335
[363424.753910] Initializing USB Mass Storage driver...
[363424.753910] scsi4 : SCSI emulation for USB Mass Storage devices
[363424.759729] usb-storage: device found at 3
[363424.759729] usb-storage: waiting for device to settle before scanning
[363424.753910] usbcore: registered new interface driver usb-storage
[363424.753910] USB Mass Storage support registered.
[363429.758097] usb-storage: device scan complete
[363429.758948] scsi 4:0:0:0: Direct-Access WD My Book 1110 1032 PQ: 0 ANSI: 4
[363429.759769] scsi 4:0:0:1: CD-ROM WD Virtual CD 1110 1032 PQ: 0 ANSI: 4
[363429.760479] scsi 4:0:0:2: Enclosure WD SES Device 1032 PQ: 0 ANSI: 4
[363429.768396] sd 4:0:0:0: [sde] 1952151552 512-byte hardware sectors (999502 MB)
[363429.770225] sd 4:0:0:0: [sde] Write Protect is off
[363429.770225] sd 4:0:0:0: [sde] Mode Sense: 23 00 10 00
[363429.770225] sd 4:0:0:0: [sde] Assuming drive cache: write through
[363429.771579] sd 4:0:0:0: [sde] 1952151552 512-byte hardware sectors (999502 MB)
[363429.773348] sd 4:0:0:0: [sde] Write Protect is off
[363429.773348] sd 4:0:0:0: [sde] Mode Sense: 23 00 10 00
[363429.773348] sd 4:0:0:0: [sde] Assuming drive cache: write through
[363429.773348] sde: sde1
[363437.356094] sd 4:0:0:0: [sde] Attached SCSI disk
[363437.356094] sd 4:0:0:0: Attached scsi generic sg5 type 0
[363437.359242] sr1: scsi3-mmc drive: 51x/51x caddy
[363437.359358] sr 4:0:0:1: Attached scsi CD-ROM sr1
[363437.359424] sr 4:0:0:1: Attached scsi generic sg6 type 5
[363437.360055] scsi 4:0:0:2: Attached scsi generic sg7 type 13
[363437.506226] Driver 'ses' needs updating - please use bus_type methods
[363437.506226] ses 4:0:0:2: Attached Enclosure device
[364673.053777] usb 2-1.3: USB disconnect, address 3
[364687.009530] usb 2-1.3: new high speed USB device using ehci_hcd and address 4
[364687.103532] usb 2-1.3: configuration #1 chosen from 1 choice
[364687.105282] scsi5 : SCSI emulation for USB Mass Storage devices
[364687.105282] usb-storage: device found at 4
[364687.105282] usb-storage: waiting for device to settle before scanning
[364687.105282] usb 2-1.3: New USB device found, idVendor=1058, idProduct=1110
[364687.105282] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[364687.105282] usb 2-1.3: Product: My Book 1110
[364687.105282] usb 2-1.3: Manufacturer: Western Digital
[364687.105282] usb 2-1.3: SerialNumber: 574341563534323231343335
[364692.111434] usb-storage: device scan complete
[364692.112140] scsi 5:0:0:0: Direct-Access WD My Book 1110 1032 PQ: 0 ANSI: 4
[364692.112854] scsi 5:0:0:1: CD-ROM WD Virtual CD 1110 1032 PQ: 0 ANSI: 4
[364692.113445] scsi 5:0:0:2: Enclosure WD SES Device 1032 PQ: 0 ANSI: 4
[364692.114979] sd 5:0:0:0: [sde] 1952151552 512-byte hardware sectors (999502 MB)
[364692.116791] sd 5:0:0:0: [sde] Write Protect is off
[364692.116791] sd 5:0:0:0: [sde] Mode Sense: 23 00 10 00
[364692.116791] sd 5:0:0:0: [sde] Assuming drive cache: write through
[364692.117778] sd 5:0:0:0: [sde] 1952151552 512-byte hardware sectors (999502 MB)
[364692.123995] sd 5:0:0:0: [sde] Write Protect is off
[364692.123995] sd 5:0:0:0: [sde] Mode Sense: 23 00 10 00
[364692.123995] sd 5:0:0:0: [sde] Assuming drive cache: write through
[364692.123995] sde: sde1
[364699.661179] sd 5:0:0:0: [sde] Attached SCSI disk
[364699.661179] sd 5:0:0:0: Attached scsi generic sg5 type 0
[364699.671752] sr1: scsi3-mmc drive: 51x/51x caddy
[364699.671752] sr 5:0:0:1: Attached scsi CD-ROM sr1
[364699.671752] sr 5:0:0:1: Attached scsi generic sg6 type 5
[364699.671752] ses 5:0:0:2: Attached Enclosure device
[364699.671752] ses 5:0:0:2: Attached scsi generic sg7 type 13
[365299.011804] usb 2-1.3: USB disconnect, address 4
[365334.346920] usb 2-1.3: new high speed USB device using ehci_hcd and address 5
[365334.440738] usb 2-1.3: configuration #1 chosen from 1 choice
[365334.450025] scsi6 : SCSI emulation for USB Mass Storage devices
[365334.455013] usb-storage: device found at 5
[365334.455013] usb-storage: waiting for device to settle before scanning
[365334.450025] usb 2-1.3: New USB device found, idVendor=1058, idProduct=1110
[365334.450025] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[365334.450025] usb 2-1.3: Product: My Book 1110
[365334.450025] usb 2-1.3: Manufacturer: Western Digital
[365334.450025] usb 2-1.3: SerialNumber: 574341563534323231343335
[365339.465426] usb-storage: device scan complete
[365339.465426] scsi 6:0:0:0: Direct-Access WD My Book 1110 1032 PQ: 0 ANSI: 4
[365339.466268] scsi 6:0:0:1: CD-ROM WD Virtual CD 1110 1032 PQ: 0 ANSI: 4
[365339.466965] scsi 6:0:0:2: Enclosure WD SES Device 1032 PQ: 0 ANSI: 4
[365339.470318] sd 6:0:0:0: [sde] 1952151552 512-byte hardware sectors (999502 MB)
[365339.472061] sd 6:0:0:0: [sde] Write Protect is off
[365339.472061] sd 6:0:0:0: [sde] Mode Sense: 23 00 10 00
[365339.472061] sd 6:0:0:0: [sde] Assuming drive cache: write through
[365339.473005] sd 6:0:0:0: [sde] 1952151552 512-byte hardware sectors (999502 MB)
[365339.475089] sd 6:0:0:0: [sde] Write Protect is off
[365339.475089] sd 6:0:0:0: [sde] Mode Sense: 23 00 10 00
[365339.475089] sd 6:0:0:0: [sde] Assuming drive cache: write through
[365339.475089] sde: sde1
[365339.500441] sd 6:0:0:0: [sde] Attached SCSI disk
[365339.500512] sd 6:0:0:0: Attached scsi generic sg5 type 0
[365339.504973] sr1: scsi3-mmc drive: 51x/51x caddy
[365339.504973] sr 6:0:0:1: Attached scsi CD-ROM sr1
[365339.504973] sr 6:0:0:1: Attached scsi generic sg6 type 5
[365339.504973] ses 6:0:0:2: Attached Enclosure device
[365339.504973] ses 6:0:0:2: Attached scsi generic sg7 type 13
Czyli mam go podłączyć np.
?
: 06 września 2010, 16:43
autor: ryba84
Z dmesg wynika, że Twój dysk to sde. Czyli:
Pokaż jeszcze co pokazuje
po podłączeniu dysku.
: 07 września 2010, 11:43
autor: cooleq
Kod: Zaznacz cały
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00065c15
Device Boot Start End Blocks Id System
/dev/sda1 1 30 240943+ fd Linux raid autodetect
/dev/sda2 3648 4255 4883760 82 Linux swap / Solaris
/dev/sda3 4256 60801 454205745 fd Linux raid autodetect
/dev/sda4 31 3647 29053552+ fd Linux raid autodetect
Partition table entries are not in disk order
Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0007c0fe
Device Boot Start End Blocks Id System
/dev/sdb1 1 30 240943+ fd Linux raid autodetect
/dev/sdb2 3648 4255 4883760 82 Linux swap / Solaris
/dev/sdb3 4256 60801 454205745 fd Linux raid autodetect
/dev/sdb4 31 3647 29053552+ fd Linux raid autodetect
Partition table entries are not in disk order
Disk /dev/sdc: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00090b5f
Device Boot Start End Blocks Id System
/dev/sdc1 1 30 240943+ fd Linux raid autodetect
/dev/sdc2 3648 4255 4883760 82 Linux swap / Solaris
/dev/sdc3 4256 60801 454205745 fd Linux raid autodetect
/dev/sdc4 31 3647 29053552+ fd Linux raid autodetect
Partition table entries are not in disk order
Disk /dev/sdd: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000a7775
Device Boot Start End Blocks Id System
/dev/sdd1 1 30 240943+ fd Linux raid autodetect
/dev/sdd2 3648 4255 4883760 82 Linux swap / Solaris
/dev/sdd3 4256 60801 454205745 fd Linux raid autodetect
/dev/sdd4 31 3647 29053552+ fd Linux raid autodetect
Partition table entries are not in disk order
Disk /dev/md0: 246 MB, 246611968 bytes
2 heads, 4 sectors/track, 60208 cylinders
Units = cylinders of 8 * 512 = 4096 bytes
Disk identifier: 0x00000000
Disk /dev/md0 doesn't contain a valid partition table
Disk /dev/md2: 1395.3 GB, 1395319701504 bytes
2 heads, 4 sectors/track, 340654224 cylinders
Units = cylinders of 8 * 512 = 4096 bytes
Disk identifier: 0x00000000
Disk /dev/md2 doesn't contain a valid partition table
Disk /dev/md1: 89.2 GB, 89252167680 bytes
2 heads, 4 sectors/track, 21790080 cylinders
Units = cylinders of 8 * 512 = 4096 bytes
Disk identifier: 0x00000000
Disk /dev/md1 doesn't contain a valid partition table
Disk /dev/sde: 999.5 GB, 999501594624 bytes
255 heads, 63 sectors/track, 121515 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0002ae3f
Device Boot Start End Blocks Id System
/dev/sde1 1 121516 976074752 7 HPFS/NTFS
No faktycznie masz rację. Jeszcze tylko inny system plików i hula. Dziękować!