[+] Problemy po własnej kompilacji jajka
: 26 lutego 2010, 10:29
Witam,
Coś mnie naszło żeby sobie zaktualizować jajo (do 2.6.33), tak z nudów. Wszystko ładnie się skompilowało, zainstalowało ale po wyborze systemu z gruba:
Może to być przyczyną tego, że podczas instalacji systemu miałem podłączony dysk przez przejściówkę (IDE-USB)? Przy kompilacji nawet wyświetlał jakieś błędy, że nie może sprawdzić jego rozmiaru czy coś w tym stylu.
/etc/fstab:
/boot/grub/grub.conf:
Debian: Sid
System plików: Ext4.
Coś mnie naszło żeby sobie zaktualizować jajo (do 2.6.33), tak z nudów. Wszystko ładnie się skompilowało, zainstalowało ale po wyborze systemu z gruba:
Kod: Zaznacz cały
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)/etc/fstab:
Kod: Zaznacz cały
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda2 during installation
UUID=2a640c9b-f683-46bc-a8e1-2e83d266d95c / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=28da6f6f-e05a-4299-9405-2c6f2ee3c4ab none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto 0 0
/dev/sdb1 /media/usb0 auto rw,user,noauto 0 0Kod: Zaznacz cały
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
insmod ext2
set root=(hd0,2)
search --no-floppy --fs-uuid --set 2a640c9b-f683-46bc-a8e1-2e83d266d95c
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root=(hd0,2)
search --no-floppy --fs-uuid --set 2a640c9b-f683-46bc-a8e1-2e83d266d95c
set locale_dir=($root)/boot/grub/locale
set lang=pl
insmod gettext
set timeout=5
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
insmod ext2
set root=(hd0,2)
search --no-floppy --fs-uuid --set 2a640c9b-f683-46bc-a8e1-2e83d266d95c
insmod png
if background_image /usr/share/images/desktop-base/moreblue-orbit-grub.png ; then
set color_normal=black/black
set color_highlight=magenta/black
else
set menu_color_normal=cyan/blue
set menu_color_highlight=white/blue
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry "Debian GNU/Linux, with Linux 2.6.33" {
insmod ext2
set root=(hd0,2)
search --no-floppy --fs-uuid --set 2a640c9b-f683-46bc-a8e1-2e83d266d95c
echo Loading Linux 2.6.33 ...
linux /boot/vmlinuz-2.6.33 root=/dev/sda2 ro quiet
}
menuentry "Debian GNU/Linux, with Linux 2.6.33 (recovery mode)" {
insmod ext2
set root=(hd0,2)
search --no-floppy --fs-uuid --set 2a640c9b-f683-46bc-a8e1-2e83d266d95c
echo Loading Linux 2.6.33 ...
linux /boot/vmlinuz-2.6.33 root=/dev/sda2 ro single
}
menuentry "Debian GNU/Linux, with Linux 2.6.32-trunk-amd64" {
insmod ext2
set root=(hd0,2)
search --no-floppy --fs-uuid --set 2a640c9b-f683-46bc-a8e1-2e83d266d95c
echo Loading Linux 2.6.32-trunk-amd64 ...
linux /boot/vmlinuz-2.6.32-trunk-amd64 root=UUID=2a640c9b-f683-46bc-a8e1-2e83d266d95c ro quiet
echo Loading initial ramdisk ...
initrd /boot/initrd.img-2.6.32-trunk-amd64
}
menuentry "Debian GNU/Linux, with Linux 2.6.32-trunk-amd64 (recovery mode)" {
insmod ext2
set root=(hd0,2)
search --no-floppy --fs-uuid --set 2a640c9b-f683-46bc-a8e1-2e83d266d95c
echo Loading Linux 2.6.32-trunk-amd64 ...
linux /boot/vmlinuz-2.6.32-trunk-amd64 root=UUID=2a640c9b-f683-46bc-a8e1-2e83d266d95c ro single
echo Loading initial ramdisk ...
initrd /boot/initrd.img-2.6.32-trunk-amd64
}
menuentry "Debian GNU/Linux, with Linux 2.6.32-2-amd64" {
insmod ext2
set root=(hd0,2)
search --no-floppy --fs-uuid --set 2a640c9b-f683-46bc-a8e1-2e83d266d95c
echo Loading Linux 2.6.32-2-amd64 ...
linux /boot/vmlinuz-2.6.32-2-amd64 root=UUID=2a640c9b-f683-46bc-a8e1-2e83d266d95c ro quiet
echo Loading initial ramdisk ...
initrd /boot/initrd.img-2.6.32-2-amd64
}
menuentry "Debian GNU/Linux, with Linux 2.6.32-2-amd64 (recovery mode)" {
insmod ext2
set root=(hd0,2)
search --no-floppy --fs-uuid --set 2a640c9b-f683-46bc-a8e1-2e83d266d95c
echo Loading Linux 2.6.32-2-amd64 ...
linux /boot/vmlinuz-2.6.32-2-amd64 root=UUID=2a640c9b-f683-46bc-a8e1-2e83d266d95c ro single
echo Loading initial ramdisk ...
initrd /boot/initrd.img-2.6.32-2-amd64
}
menuentry "Debian GNU/Linux, with Linux 2.6.30-2-amd64" {
insmod ext2
set root=(hd0,2)
search --no-floppy --fs-uuid --set 2a640c9b-f683-46bc-a8e1-2e83d266d95c
echo Loading Linux 2.6.30-2-amd64 ...
linux /boot/vmlinuz-2.6.30-2-amd64 root=UUID=2a640c9b-f683-46bc-a8e1-2e83d266d95c ro quiet
echo Loading initial ramdisk ...
initrd /boot/initrd.img-2.6.30-2-amd64
}
menuentry "Debian GNU/Linux, with Linux 2.6.30-2-amd64 (recovery mode)" {
insmod ext2
set root=(hd0,2)
search --no-floppy --fs-uuid --set 2a640c9b-f683-46bc-a8e1-2e83d266d95c
echo Loading Linux 2.6.30-2-amd64 ...
linux /boot/vmlinuz-2.6.30-2-amd64 root=UUID=2a640c9b-f683-46bc-a8e1-2e83d266d95c ro single
echo Loading initial ramdisk ...
initrd /boot/initrd.img-2.6.30-2-amd64
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows (on /dev/sda1)" {
insmod ntfs
set root=(hd0,1)
search --no-floppy --fs-uuid --set 283036f93036cd96
drivemap -s (hd0) ${root}
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###System plików: Ext4.