Polskie Forum Użytkowników Debiana

Polski portal użytkowników dystrybucji Debian GNU/Linux, dyskusje, artykuły, nowości, blog, porady, pomoc.
https://www.debian.pl/

Samoistny reset komputera po róznym czasie - Lenny

https://www.debian.pl/viewtopic.php?t=16936

Strona 1 z 4

Samoistny reset komputera po róznym czasie - Lenny

: 01 stycznia 2010, 20:37
autor: shadow193
Co pewien czas samoistnie resetuje mi się komputer, ale mam tak tylko pod systemem Linux, tzn. miałem tak na Kubuntu 8.04 i teraz mam tak na Debianie 5.0.

Pod Windowsem mi się to nie zdarza.

Macie jakieś propozycje? Co może być powodem?

: 01 stycznia 2010, 20:42
autor: darkwater
Bez logów i dokładniejszego opisu okoliczności w jakich się restartuje, niewiele da się powiedzieć.

: 01 stycznia 2010, 20:47
autor: shadow193
Zauważyłem, że resetuje się zazwyczaj gdy przeglądam internet lub słucham muzyki.
Tak jakby zachodziło jakieś przeciążenie, ale to mało prawdopodobne, na Windowsie robię 100 rzeczy i nic się nie wyłącza.

Tutaj dołączam parę informacji:

Kod: Zaznacz cały

uname -a
Linux shad0w193alfa1pl 2.6.26-2-686 #1 SMP Wed Aug 19 06:06:52 UTC 2009 i686 GNU/Linux

Kod: Zaznacz cały

dpkg --print-architecture
i386

Kod: Zaznacz cały

lspci -k
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 03)
	Kernel driver in use: agpgart-intel
	Kernel modules: intel-agp
00:01.0 PCI bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE Host-to-AGP Bridge (rev 03)
	Kernel modules: shpchp
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 02)
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 02)
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 02)
	Kernel driver in use: uhci_hcd
	Kernel modules: uhci-hcd
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 02)
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 82)
	Kernel modules: shpchp
00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge (rev 02)
	Kernel modules: iTCO_wdt, intel-rng
00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 02)
	Kernel driver in use: PIIX_IDE
	Kernel modules: piix
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 02)
	Kernel driver in use: i801_smbus
	Kernel modules: i2c-i801
01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (rev 01)
	Kernel modules: radeonfb
01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (Secondary) (rev 01)
02:0a.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
	Kernel driver in use: EMU10K1_Audigy
	Kernel modules: snd-emu10k1
02:0a.1 Input device controller: Creative Labs SB Live! Game Port (rev 07)
	Kernel driver in use: Emu10k1_gameport
	Kernel modules: emu10k1-gp
02:0b.0 Communication controller: Conexant HSF 56k Data/Fax/Voice/Spkp (w/Handset) Modem (WorldW SmartDAA) (rev 01)
02:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
	Kernel driver in use: 8139too
	Kernel modules: 8139too, 8139cp

: 01 stycznia 2010, 20:55
autor: mysza-j
A w logach nic się nie pojawia ?

: 01 stycznia 2010, 20:58
autor: shadow193
A jak odczytać logi?
Przepraszam, ale jestem zielony.

: 01 stycznia 2010, 21:32
autor: darkwater

Kod: Zaznacz cały

cat /var/log/messages
cat /var/log/kern.log

: 01 stycznia 2010, 21:40
autor: shadow193
cat /var/log/messages:

Kod: Zaznacz cały

Jan  1 21:06:07 shad0w193alfa1pl kernel: [    1.576304] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    1.581513] brd: module loaded
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    1.581823] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    1.581829] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    1.582406] serio: i8042 KBD port at 0x60,0x64 irq 1
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    1.582817] mice: PS/2 mouse device common for all mice
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    1.583190] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    1.583218] rtc0: alarms up to one month
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    1.583356] cpuidle: using governor ladder
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    1.583362] cpuidle: using governor menu
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    1.583375] No iBFT detected.
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    1.584200] TCP cubic registered
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    1.584207] NET: Registered protocol family 17
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    1.584223] Using IPI No-Shortcut mode
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    1.584666] registered taskstats version 1
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    1.584898] rtc_cmos 00:02: setting system clock to 2010-01-01 21:05:46 UTC (1262379946)
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    1.585304] Freeing unused kernel memory: 244k freed
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    1.602550] input: AT Translated Set 2 keyboard as /class/input/input0
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    1.779934] ACPI: ACPI0007:00 is registered as cooling_device0
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    2.982427] usbcore: registered new interface driver usbfs
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    2.982481] usbcore: registered new interface driver hub
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    2.982579] usbcore: registered new device driver usb
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    2.998515] USB Universal Host Controller Interface driver v3.0
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    2.998594] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    2.998623] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    2.998860] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    2.998912] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000b800
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    2.999078] usb usb1: configuration #1 chosen from 1 choice
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    2.999136] hub 1-0:1.0: USB hub found
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    2.999154] hub 1-0:1.0: 2 ports detected
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.079957] Uniform Multi-Platform E-IDE driver
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.079968] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.100274] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.100283] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.100289] usb usb1: Product: UHCI Host Controller
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.100292] usb usb1: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.100296] usb usb1: SerialNumber: 0000:00:1d.0
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.100420] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.100445] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.100516] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.100562] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b000
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.100717] usb usb2: configuration #1 chosen from 1 choice
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.100784] hub 2-0:1.0: USB hub found
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.100802] hub 2-0:1.0: 2 ports detected
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.183784] 8139too Fast Ethernet driver 0.9.28
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.204245] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.204253] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.204258] usb usb2: Product: UHCI Host Controller
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.204262] usb usb2: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.204266] usb usb2: SerialNumber: 0000:00:1d.1
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.204369] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.204395] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.204460] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.204503] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.204663] usb usb3: configuration #1 chosen from 1 choice
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.204727] hub 3-0:1.0: USB hub found
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.204748] hub 3-0:1.0: 2 ports detected
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.253056] Floppy drive(s): fd0 is 1.44M
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.271927] FDC 0 is a post-1991 82077
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.308248] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.308257] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.308262] usb usb3: Product: UHCI Host Controller
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.308266] usb usb3: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.308270] usb usb3: SerialNumber: 0000:00:1d.2
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.308436] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.308469] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.308544] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.312488] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe6100000
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.340067] usb 1-2: new low speed USB device using uhci_hcd and address 2
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.352053] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.352224] usb usb4: configuration #1 chosen from 1 choice
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.352284] hub 4-0:1.0: USB hub found
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.352302] hub 4-0:1.0: 6 ports detected
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.456269] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.456277] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.456282] usb usb4: Product: EHCI Host Controller
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.456285] usb usb4: Manufacturer: Linux 2.6.26-2-686 ehci_hcd
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.456289] usb usb4: SerialNumber: 0000:00:1d.7
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.461325] ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 17 (level, low) -> IRQ 17
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.462233] eth0: RealTek RTL8139 at 0xac00, 00:11:2f:8d:33:14, IRQ 17
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.463048] ICH4: IDE controller (0x8086:0x24cb rev 0x02) at  PCI slot 0000:00:1f.1
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.463068] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.463087] ICH4: not 100% native mode: will probe irqs later
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.463106]     ide0: BM-DMA at 0xf000-0xf007
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.463122]     ide1: BM-DMA at 0xf008-0xf00f
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.477318] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    3.976193] hdb: ST3320620A, ATA DISK drive
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    4.032559] hdb: UDMA/100 mode selected
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    4.328023] usb 4-4: new high speed USB device using ehci_hcd and address 4
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    4.461545] usb 4-4: configuration #1 chosen from 1 choice
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    4.461942] hub 4-4:1.0: USB hub found
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    4.462335] hub 4-4:1.0: 4 ports detected
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    4.568242] usb 4-4: New USB device found, idVendor=05e3, idProduct=0606
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    4.568249] usb 4-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    4.568253] usb 4-4: Product: USB2.0 Hub
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    4.768192] hdc: HL-DT-ST GCE-8320B, ATAPI CD/DVD-ROM drive
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    4.808024] usb 1-2: new low speed USB device using uhci_hcd and address 3
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    4.960004] usb 1-2: configuration #1 chosen from 1 choice
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    4.995269] usb 1-2: New USB device found, idVendor=09da, idProduct=000e
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    4.995277] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    4.995282] usb 1-2: Product: PS/2+USB Mouse
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    4.995285] usb 1-2: Manufacturer: A4Tech
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    5.232024] usb 2-1: new full speed USB device using uhci_hcd and address 2
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    5.392006] usb 2-1: configuration #1 chosen from 1 choice
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    5.446642] usb 2-1: New USB device found, idVendor=1110, idProduct=9031
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    5.446642] usb 2-1: New USB device strings: Mfr=0, Product=2, SerialNumber=3
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    5.446642] usb 2-1: Product: ADSL-USB Modem
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    5.446642] usb 2-1: SerialNumber: 0015569427B1
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    5.552284] hdd: HL-DT-ST DVDRAM GSA-H10N, ATAPI CD/DVD-ROM drive
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    5.608213] hdc: MWDMA2 mode selected
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    5.609069] hdd: UDMA/33 mode selected
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    5.609559] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    5.611038] ide1 at 0x170-0x177,0x376 on irq 15
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    5.619760] No dock devices found.
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    5.637410] SCSI subsystem initialized
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    5.656632] usb 4-4.1: new full speed USB device using ehci_hcd and address 5
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    5.723768] hdb: max request size: 512KiB
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    5.752728] usb 4-4.1: configuration #1 chosen from 1 choice
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    5.753244] usb 4-4.1: New USB device found, idVendor=1019, idProduct=0c55
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    5.753251] usb 4-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    5.753257] usb 4-4.1: Product: USB Storage Device
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    5.753260] usb 4-4.1: Manufacturer: ICneric 
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    5.753263] usb 4-4.1: SerialNumber: 0AEC305000001A000
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    5.766827] hdb: 625142448 sectors (320072 MB) w/16384KiB Cache, CHS=38913/255/63
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    5.791209] hdb: cache flushes supported
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    5.791307]  hdb: hdb1 hdb2 < hdb5 hdb6<6>Initializing USB Mass Storage driver...
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    5.851864]  hdb7 hdb8 >
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    5.863009] hdc: ATAPI 40X CD-ROM CD-R/RW drive, 8192kB Cache
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    5.863021] Uniform CD-ROM driver Revision: 3.20
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    5.866531] hdd: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    5.952356] usb 4-4.3: new high speed USB device using ehci_hcd and address 6
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    6.053110] usb 4-4.3: configuration #1 chosen from 1 choice
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    6.053571] usb 4-4.3: New USB device found, idVendor=13fe, idProduct=1f23
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    6.053578] usb 4-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    6.053582] usb 4-4.3: Product: STORE N GO
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    6.053585] usb 4-4.3: Manufacturer: Verbatim
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    6.053587] usb 4-4.3: SerialNumber: 078710E30476
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    6.252358] usb 4-4.4: new full speed USB device using ehci_hcd and address 7
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    6.345718] usb 4-4.4: configuration #1 chosen from 1 choice
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    6.346175] usb 4-4.4: New USB device found, idVendor=0ac8, idProduct=303b
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    6.346182] usb 4-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    6.346187] usb 4-4.4: Product: PC Camera
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    6.346190] usb 4-4.4: Manufacturer: Vimicro Corp.
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    6.346285] usbcore: registered new interface driver hiddev
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    6.347186] scsi0 : SCSI emulation for USB Mass Storage devices
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    6.347552] scsi1 : SCSI emulation for USB Mass Storage devices
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    6.347737] usbcore: registered new interface driver usb-storage
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    6.347747] USB Mass Storage support registered.
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    6.360847] input: A4Tech PS/2+USB Mouse as /class/input/input1
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    6.372164] input,hidraw0: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:1d.0-2
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    6.372210] usbcore: registered new interface driver usbhid
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    6.372217] usbhid: v2.6:USB HID core driver
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    6.708101] PM: Starting manual resume from disk
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    6.767585] kjournald starting.  Commit interval 5 seconds
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    6.767616] EXT3-fs: mounted filesystem with ordered data mode.
Jan  1 21:06:07 shad0w193alfa1pl kernel: [    8.261084] udevd version 125 started
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   10.579086] Linux agpgart interface v0.103
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   10.600102] agpgart: Detected an Intel 830M Chipset.
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   10.604101] agpgart: AGP aperture is 64M @ 0xe0000000
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   10.615031] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   10.625994] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   10.955349] input: Power Button (FF) as /class/input/input2
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   10.987608] ACPI: Power Button (FF) [PWRF]
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   10.987745] input: Power Button (CM) as /class/input/input3
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   11.012149] ACPI: Power Button (CM) [PWRB]
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   11.353605] scsi 1:0:0:0: Direct-Access     Verbatim STORE N GO       5.00 PQ: 0 ANSI: 0 CCS
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   11.357598] scsi 0:0:0:0: Direct-Access     IC       USB Storage-CFC  322E PQ: 0 ANSI: 0 CCS
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   11.358592] scsi 0:0:0:1: Direct-Access     IC       USB Storage-SMC  322E PQ: 0 ANSI: 0 CCS
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   11.359611] scsi 0:0:0:2: Direct-Access     IC       USB Storage-MMC  322E PQ: 0 ANSI: 0 CCS
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   11.360726] scsi 0:0:0:3: Direct-Access     IC       USB Storage-MSC  322E PQ: 0 ANSI: 0 CCS
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   12.474722] NET: Registered protocol family 8
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   12.474728] NET: Registered protocol family 20
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   12.551535] [ueagle-atm] driver ueagle 1.4 loaded
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   12.551577] usb 2-1: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X9031) Rev (0X200B): Eagle III
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   12.660065] usb 2-1: reset full speed USB device using uhci_hcd and address 2
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   12.742907] intel_rng: FWH not detected
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   12.871941] usb 2-1: [ueagle-atm] using iso mode
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   12.872319] usb 2-1: [ueagle-atm] (re)booting started
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   12.873855] usbcore: registered new interface driver ueagle-atm
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   13.069103] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   13.123937] input: PC Speaker as /class/input/input4
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   13.296003] Linux video capture interface: v2.00
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   13.354044] zc0301: V4L2 driver for ZC0301[P] Image Processor and Control Chip v1:1.10
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   13.354116] usb 4-4.4: ZC0301[P] Image Processor and Control Chip detected (vid/pid 0x0AC8:0x303B)
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   13.464458] usb 4-4.4: PB-0330 image sensor detected
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   13.561177] gameport: EMU10K1 is pci0000:02:0a.1/gameport0, io 0xa400, speed 903kHz
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   13.744499] usb 4-4.4: Initialization succeeded
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   13.744576] usb 4-4.4: V4L2 device registered as /dev/video0
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   13.744617] usbcore: registered new interface driver zc0301
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   13.913219] parport_pc 00:08: reported by Plug and Play ACPI
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   13.913326] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   14.110518] gameport: NS558 PnP Gameport is pnp00:0a/gameport0, io 0x201, speed 806kHz
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   14.328058] firmware: requesting ueagle-atm/DSPep.bin
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   14.799727] Driver 'sd' needs updating - please use bus_type methods
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   14.800505] sd 1:0:0:0: [sda] 7827456 512-byte hardware sectors (4008 MB)
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   14.801284] sd 1:0:0:0: [sda] Write Protect is off
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   14.804105] sd 1:0:0:0: [sda] 7827456 512-byte hardware sectors (4008 MB)
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   14.804755] sd 1:0:0:0: [sda] Write Protect is off
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   14.804842]  sda: sda1
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   14.805875] sd 1:0:0:0: [sda] Attached SCSI removable disk
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   14.807665] sd 0:0:0:0: [sdb] Attached SCSI removable disk
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   14.809425] sd 0:0:0:1: [sdc] Attached SCSI removable disk
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   14.811195] sd 0:0:0:2: [sdd] Attached SCSI removable disk
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   14.813035] sd 0:0:0:3: [sde] Attached SCSI removable disk
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   16.200836] usb 2-1: [ueagle-atm] ATU-R firmware version : 44e2ea17
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   16.200847] firmware: requesting ueagle-atm/CMVep.bin.v2
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   16.207143] ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 22
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   16.620637] usb 2-1: [Ueagle-atm] requesting firmware ueagle-atm/CMVep.bin.v2 failed, try to get older cmvs
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   16.620647] firmware: requesting ueagle-atm/CMVep.bin
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   16.769648] usb 2-1: [Ueagle-atm] use deprecated cmvs version, please update your firmware
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   16.816848] usb 2-1: [ueagle-atm] modem started, waiting synchronization...
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   17.423946] Adding 3903752k swap on /dev/hdb7.  Priority:-1 extents:1 across:3903752k
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   17.706017] EXT3 FS on hdb6, internal journal
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   18.329966] loop: module loaded
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   18.844067] kjournald starting.  Commit interval 5 seconds
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   18.844322] EXT3 FS on hdb8, internal journal
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   18.844333] EXT3-fs: mounted filesystem with ordered data mode.
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   19.778608] PPP generic driver version 2.4.2
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   19.947156] NET: Registered protocol family 10
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   19.947959] lo: Disabled Privacy Extensions
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   21.820432] usb 2-1: [ueagle-atm] modem synchronization failed (may be try other cmv/dsp)
Jan  1 21:06:07 shad0w193alfa1pl kernel: [   21.820442] usb 2-1: [ueagle-atm] (re)booting started
Jan  1 21:06:07 shad0w193alfa1pl rsyslogd: [origin software="rsyslogd" swVersion="3.18.6" x-pid="2531" x-info="http://www.rsyslog.com"] restart
Jan  1 21:06:08 shad0w193alfa1pl kernel: [   23.232125] firmware: requesting ueagle-atm/DSPep.bin
Jan  1 21:06:08 shad0w193alfa1pl kernel: [   23.413168] lp0: using parport0 (interrupt-driven).
Jan  1 21:06:08 shad0w193alfa1pl kernel: [   23.442237] ppdev: user-space parallel port driver
Jan  1 21:06:08 shad0w193alfa1pl kernel: [   23.548877] usb 2-1: [ueagle-atm] ATU-R firmware version : 44e2ea17
Jan  1 21:06:08 shad0w193alfa1pl kernel: [   23.548877] firmware: requesting ueagle-atm/CMVep.bin.v2
Jan  1 21:06:08 shad0w193alfa1pl kernel: [   23.567585] usb 2-1: [Ueagle-atm] requesting firmware ueagle-atm/CMVep.bin.v2 failed, try to get older cmvs
Jan  1 21:06:08 shad0w193alfa1pl kernel: [   23.567599] firmware: requesting ueagle-atm/CMVep.bin
Jan  1 21:06:08 shad0w193alfa1pl kernel: [   23.598496] usb 2-1: [Ueagle-atm] use deprecated cmvs version, please update your firmware
Jan  1 21:06:08 shad0w193alfa1pl kernel: [   23.639913] usb 2-1: [ueagle-atm] modem started, waiting synchronization...
Jan  1 21:06:10 shad0w193alfa1pl dhcdbd: Started up.
Jan  1 21:06:12 shad0w193alfa1pl kernel: [   27.261538] eth0: link down
Jan  1 21:06:12 shad0w193alfa1pl kernel: [   27.262581] ADDRCONF(NETDEV_UP): eth0: link is not ready
Jan  1 21:06:14 shad0w193alfa1pl kernel: [   29.487150] [drm] Initialized drm 1.1.0 20060810
Jan  1 21:06:14 shad0w193alfa1pl kernel: [   29.497827] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Jan  1 21:06:14 shad0w193alfa1pl kernel: [   29.498128] [drm] Initialized radeon 1.29.0 20080528 on minor 0
Jan  1 21:06:15 shad0w193alfa1pl kernel: [   30.091103] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
Jan  1 21:06:15 shad0w193alfa1pl kernel: [   30.091145] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
Jan  1 21:06:15 shad0w193alfa1pl kernel: [   30.091179] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
Jan  1 21:06:15 shad0w193alfa1pl kernel: [   30.472518] [drm] Setting GART location based on new memory map
Jan  1 21:06:15 shad0w193alfa1pl kernel: [   30.472518] [drm] Loading R200 Microcode
Jan  1 21:06:15 shad0w193alfa1pl kernel: [   30.472518] [drm] writeback test succeeded in 1 usecs
Jan  1 21:06:21 shad0w193alfa1pl kernel: [   36.676114] usb 2-1: [ueagle-atm] modem operational
Jan  1 21:06:35 shad0w193alfa1pl pppd[2190]: LCP: timeout sending Config-Requests
Jan  1 21:06:35 shad0w193alfa1pl pppd[2190]: Connection terminated.
Jan  1 21:06:35 shad0w193alfa1pl pppd[2190]: Modem hangup
Jan  1 21:06:39 shad0w193alfa1pl pppd[2190]: Using interface ppp0
Jan  1 21:06:39 shad0w193alfa1pl pppd[2190]: Connect: ppp0 <--> 0.35
Jan  1 21:06:43 shad0w193alfa1pl pppd[2190]: CHAP authentication succeeded
Jan  1 21:06:43 shad0w193alfa1pl pppd[2190]: CHAP authentication succeeded
Jan  1 21:06:43 shad0w193alfa1pl kernel: [   58.549340] PPP BSD Compression module registered
Jan  1 21:06:43 shad0w193alfa1pl kernel: [   58.735414] PPP Deflate Compression module registered
Jan  1 21:06:43 shad0w193alfa1pl pppd[2190]: local  IP address 79.185.4.127
Jan  1 21:06:43 shad0w193alfa1pl pppd[2190]: remote IP address 213.25.2.173
Jan  1 21:06:43 shad0w193alfa1pl pppd[2190]: primary   DNS address 194.204.159.1
Jan  1 21:06:43 shad0w193alfa1pl pppd[2190]: secondary DNS address 194.204.152.34
Jan  1 21:14:12 shad0w193alfa1pl kernel: [  507.567881] UDF-fs: No VRS found

: 01 stycznia 2010, 22:05
autor: darkwater
Chodziło o logi zaraz po niespodziewanym restarcie, tzn zaraz po ponownym uruchomieniu.

: 01 stycznia 2010, 22:37
autor: shadow193
Po następnym restarcie dam loga.

: 01 stycznia 2010, 22:55
autor: fnmirk
Interesuje mnie wynik poleceń:

Kod: Zaznacz cały

ls -l /etc/rc0.d
ls -l /etc/rc1.d
ls -l /etc/rc2.d
ls -l /etc/rc3.d
ls -l /etc/rc4.d
ls -l /etc/rc5.d
ls -l /etc/rc6.d
ls -l /etc/rcS.d
Dlaczego, miałem już podobną sytuację przy wersji stabilnej Debiana. Powodem była zła kolejność uruchamiania usług i programów. Nie pamiętam już co zmieniałem ale było to jakieś odwołanie do crona, powiązane z wyłączaniem komputera.
Strefa czasowa UTC+02:00
Strona 1 z 4

Technologię dostarcza phpBB® Forum Software © phpBB Limited

Polski pakiet językowy dostarcza phpBB.pl