Strona 1 z 2
Cmake błąd przy kompilacji kio sysinfo
: 11 sierpnia 2009, 04:08
autor: foreste
Mam problem skonfigurowaniu makefile przy użyciu cmake, cmake z repozytorium Squeeze i źródłowe ze strony cmake. Chyba działa ta z repozytorium.
Taki błąd mam:
Kod: Zaznacz cały
bartek@Shade:~/Desktop/sysinfo-2.0/build$ cmake .. -DCMAKE_INSTALL_PREFIX=`kde4-config --prefix`
CMake Error at CMakeLists.txt:7 (kde4_add_plugin):
Unknown CMake command "kde4_add_plugin".
CMake Warning (dev) in CMakeLists.txt:
No cmake_minimum_required command is present. A line of code such as
cmake_minimum_required(VERSION 2.6)
should be added at the top of the file. The version specified may be lower
if you wish to support older CMake versions for this project. For more
information run "cmake --help-policy CMP0000".
This warning is for project developers. Use -Wno-dev to suppress it.
-- Configuring incomplete, errors occurred!
bartek@Shade:~/Desktop/sysinfo-2.0/build$ cmake --help-policy CMP0000
cmake version 2.6-patch 4
aki sposób na to jest?
: 11 sierpnia 2009, 10:02
autor: kiko80
W pliku CMakeLists.txt na początku dodaj tą linię
Kod: Zaznacz cały
cmake_minimum_required(VERSION 2.6.0)
set(KDE_MIN_VERSION "4.00.82")
find_package(KDE4 REQUIRED)
include(KDE4Defaults)
include(MacroLibrary)
include(CheckIncludeFile)
add_definitions (${QT_DEFINITIONS} ${KDE4_DEFINITIONS})
include_directories(${CMAKE_SOURCE_DIR} ${CMAKE_BINARY_DIR} ${KDE4_INCLUDES}
${KDE4_INCLUDE_DIR} ${QT_INCLUDES})
: 11 sierpnia 2009, 13:57
autor: foreste
Cmake poszlo succes ;-)
ale przy make mam takie błędy
Kod: Zaznacz cały
bartek@Shade:~/Desktop/sysinfo-2.0$ make
/usr/bin/cmake -H/home/bartek/Desktop/sysinfo-2.0/src -B/home/bartek/Desktop/sysinfo-2.0 --check-build-system CMakeFiles/Makefile.cmake 0
/usr/bin/cmake -E cmake_progress_start /home/bartek/Desktop/sysinfo-2.0/CMakeFiles /home/bartek/Desktop/sysinfo-2.0/CMakeFiles/progress.make
make -f CMakeFiles/Makefile2 all
make[1]: Wejście do katalogu `/home/bartek/Desktop/sysinfo-2.0'
make -f CMakeFiles/kio_sysinfo_automoc.dir/build.make CMakeFiles/kio_sysinfo_automoc.dir/depend
make[2]: Wejście do katalogu `/home/bartek/Desktop/sysinfo-2.0'
cd /home/bartek/Desktop/sysinfo-2.0 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/bartek/Desktop/sysinfo-2.0/src /home/bartek/Desktop/sysinfo-2.0/src /home/bartek/Desktop/sysinfo-2.0 /home/bartek/Desktop/sysinfo-2.0 /home/bartek/Desktop/sysinfo-2.0/CMakeFiles/kio_sysinfo_automoc.dir/DependInfo.cmake --color=
make[2]: Opuszczenie katalogu `/home/bartek/Desktop/sysinfo-2.0'
make -f CMakeFiles/kio_sysinfo_automoc.dir/build.make CMakeFiles/kio_sysinfo_automoc.dir/build
make[2]: Wejście do katalogu `/home/bartek/Desktop/sysinfo-2.0'
/usr/bin/automoc4 /home/bartek/Desktop/sysinfo-2.0/kio_sysinfo_automoc.cpp /home/bartek/Desktop/sysinfo-2.0/src /home/bartek/Desktop/sysinfo-2.0 /usr/bin/moc-qt4 /usr/bin/cmake
make[2]: Opuszczenie katalogu `/home/bartek/Desktop/sysinfo-2.0'
/usr/bin/cmake -E cmake_progress_report /home/bartek/Desktop/sysinfo-2.0/CMakeFiles
[ 0%] Built target kio_sysinfo_automoc
make -f CMakeFiles/kio_sysinfo.dir/build.make CMakeFiles/kio_sysinfo.dir/depend
make[2]: Wejście do katalogu `/home/bartek/Desktop/sysinfo-2.0'
cd /home/bartek/Desktop/sysinfo-2.0 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/bartek/Desktop/sysinfo-2.0/src /home/bartek/Desktop/sysinfo-2.0/src /home/bartek/Desktop/sysinfo-2.0 /home/bartek/Desktop/sysinfo-2.0 /home/bartek/Desktop/sysinfo-2.0/CMakeFiles/kio_sysinfo.dir/DependInfo.cmake --color=
make[2]: Opuszczenie katalogu `/home/bartek/Desktop/sysinfo-2.0'
make -f CMakeFiles/kio_sysinfo.dir/build.make CMakeFiles/kio_sysinfo.dir/build
make[2]: Wejście do katalogu `/home/bartek/Desktop/sysinfo-2.0'
/usr/bin/cmake -E cmake_progress_report /home/bartek/Desktop/sysinfo-2.0/CMakeFiles 2
[ 25%] Building CXX object CMakeFiles/kio_sysinfo.dir/sysinfo.o
/usr/bin/c++ -Dkio_sysinfo_EXPORTS -D_BSD_SOURCE -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -DQT_NO_STL -DQT_NO_CAST_TO_ASCII -D_REENTRANT -DKDE_DEPRECATED_WARNINGS -Wnon-virtual-dtor -Wno-long-long -ansi -Wundef -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -Wformat-security -fno-exceptions -fno-check-new -fno-common -Woverloaded-virtual -fno-threadsafe-statics -fvisibility=hidden -fvisibility-inlines-hidden -O2 -g -fPIC -I/home/bartek/Desktop/sysinfo-2.0 -I/home/bartek/Desktop/sysinfo-2.0/src -I/usr/include/KDE -I/usr/include/qt4/KDE -I/usr/include/qt4 -I/usr/include/qt4/phonon -I/usr/include/qt4/QtXmlPatterns -I/usr/include/qt4/QtWebKit -I/usr/include/qt4/QtHelp -I/usr/include/qt4/QtAssistant -I/usr/include/qt4/QtDBus -I/usr/include/qt4/QtTest -I/usr/include/qt4/QtUiTools -I/usr/include/qt4/QtScript -I/usr/include/qt4/QtSvg -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtSql -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtNetwork -I/usr/include/qt4/QtDesigner -I/usr/include/qt4/Qt3Support -I/usr/include/qt4/QtGui -I/usr/include/qt4/QtCore -I/usr/include/qt4/Qt -I/usr/share/qt4/mkspecs/default -D_GNU_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o CMakeFiles/kio_sysinfo.dir/sysinfo.o -c /home/bartek/Desktop/sysinfo-2.0/src/sysinfo.cpp
In file included from /home/bartek/Desktop/sysinfo-2.0/src/sysinfo.cpp:51:
/usr/include/hal/libhal.h:34:23: error: dbus/dbus.h: Nie ma takiego pliku ani katalogu
In file included from /home/bartek/Desktop/sysinfo-2.0/src/sysinfo.cpp:51:
/usr/include/hal/libhal.h:88: error: ‘DBUS_TYPE_INVALID’ was not declared in this scope
/usr/include/hal/libhal.h:91: error: ‘DBUS_TYPE_INT32’ was not declared in this scope
/usr/include/hal/libhal.h:94: error: ‘DBUS_TYPE_UINT64’ was not declared in this scope
/usr/include/hal/libhal.h:97: error: ‘DBUS_TYPE_DOUBLE’ was not declared in this scope
/usr/include/hal/libhal.h:100: error: ‘DBUS_TYPE_BOOLEAN’ was not declared in this scope
/usr/include/hal/libhal.h:103: error: ‘DBUS_TYPE_STRING’ was not declared in this scope
/usr/include/hal/libhal.h:106: error: ‘DBUS_TYPE_STRING’ was not declared in this scope
/usr/include/hal/libhal.h:124: error: ‘DBusConnection’ has not been declared
/usr/include/hal/libhal.h:185: error: ‘dbus_bool_t’ has not been declared
/usr/include/hal/libhal.h:186: error: ‘dbus_bool_t’ has not been declared
/usr/include/hal/libhal.h:292: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:295: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:298: error: expected constructor, destructor, or type conversion before ‘*’ token
/usr/include/hal/libhal.h:301: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:307: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:310: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:313: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:316: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:319: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:322: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:325: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:328: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:331: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:334: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:337: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:340: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:343: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:346: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:349: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:352: error: ‘DBusError’ was not declared in this scope
/usr/include/hal/libhal.h:352: error: ‘error’ was not declared in this scope
/usr/include/hal/libhal.h:355: error: ‘DBusError’ has not been declared
/usr/include/hal/libhal.h:358: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:361: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:364: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:373: error: ‘DBusError’ has not been declared
/usr/include/hal/libhal.h:376: error: ‘dbus_int32_t’ does not name a type
/usr/include/hal/libhal.h:382: error: ‘dbus_uint64_t’ does not name a type
/usr/include/hal/libhal.h:391: error: ‘DBusError’ has not been declared
/usr/include/hal/libhal.h:394: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:403: error: ‘DBusError’ has not been declared
/usr/include/hal/libhal.h:406: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:413: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:420: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:427: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:434: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:441: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:448: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:455: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:462: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:469: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:478: error: ‘DBusError’ has not been declared
/usr/include/hal/libhal.h:485: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:489: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:493: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:497: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:501: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:505: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:509: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:519: error: ‘DBusError’ has not been declared
/usr/include/hal/libhal.h:522: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:544: error: ‘dbus_int32_t’ does not name a type
/usr/include/hal/libhal.h:547: error: ‘dbus_uint64_t’ does not name a type
/usr/include/hal/libhal.h:553: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:580: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:595: error: ‘dbus_int32_t’ does not name a type
/usr/include/hal/libhal.h:598: error: ‘dbus_uint64_t’ does not name a type
/usr/include/hal/libhal.h:604: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:621: error: ‘DBusError’ has not been declared
/usr/include/hal/libhal.h:627: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:636: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:641: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:647: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:660: error: ‘DBusError’ has not been declared
/usr/include/hal/libhal.h:663: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:671: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:680: error: ‘DBusError’ has not been declared
/usr/include/hal/libhal.h:685: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:691: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:696: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:701: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:708: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:712: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:716: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:721: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:728: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:735: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:737: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:740: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:747: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:753: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:759: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:764: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:771: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:781: error: ‘DBusError’ has not been declared
/home/bartek/Desktop/sysinfo-2.0/src/sysinfo.cpp: In member function ‘virtual void kio_sysinfoProtocol::get(const KUrl&)’:
/home/bartek/Desktop/sysinfo-2.0/src/sysinfo.cpp:286: warning: comparison between signed and unsigned integer expressions
/home/bartek/Desktop/sysinfo-2.0/src/sysinfo.cpp: At global scope:
/home/bartek/Desktop/sysinfo-2.0/src/sysinfo.cpp:596: warning: unused parameter ‘name’
make[2]: *** [CMakeFiles/kio_sysinfo.dir/sysinfo.o] Błąd 1
make[2]: Opuszczenie katalogu `/home/bartek/Desktop/sysinfo-2.0'
make[1]: *** [CMakeFiles/kio_sysinfo.dir/all] Błąd 2
make[1]: Opuszczenie katalogu `/home/bartek/Desktop/sysinfo-2.0'
make: *** [all] Błąd 2
co mi brakuje tzn pakiet ?.
: 11 sierpnia 2009, 14:35
autor: tomii
Może libdbus-dev?
: 11 sierpnia 2009, 14:48
autor: foreste
tomii pisze:Może libdbus-dev?
Akurat to mam ale wraz błędy są :-? .
: 11 sierpnia 2009, 14:53
autor: tomii
Według
tego plik dbus.h jest w pakiecie libdbus-1-dev, zobacz w programie, czy ścieżka do niego jest poprawna.
A configure nie wymagało podania jakiś ścieżek?
: 11 sierpnia 2009, 16:21
autor: foreste
Po cmake nie ma ./configure, od razu jest make i make install.
: 11 sierpnia 2009, 16:39
autor: kiko80
foreste pisze:/usr/include/hal/libhal.h:34:23: error: dbus/dbus.h: Nie ma takiego pliku ani katalogu
tu leży problem lecz pomimo zainstalowania wszystkiego co miało dbus-dev hal-dev nadal nie chce ruszyć.
Make już jako root.
: 11 sierpnia 2009, 16:46
autor: tomii
Dziwne, w pliku libhal.h jest:
a poprawnie, przynajmniej w moim systemie to:
: 11 sierpnia 2009, 17:21
autor: foreste
Poprawiłem u siebie i teraz mi wyświetla błędy takie:
Kod: Zaznacz cały
Shade:/home/bartek/Desktop/sysinfo-2.0# make
/usr/bin/cmake -H/home/bartek/Desktop/sysinfo-2.0/src -B/home/bartek/Desktop/sysinfo-2.0 --check-build-system CMakeFiles/Makefile.cmake 0
/usr/bin/cmake -E cmake_progress_start /home/bartek/Desktop/sysinfo-2.0/CMakeFiles /home/bartek/Desktop/sysinfo-2.0/CMakeFiles/progress.make
make -f CMakeFiles/Makefile2 all
make[1]: Wejście do katalogu `/home/bartek/Desktop/sysinfo-2.0'
make -f CMakeFiles/kio_sysinfo_automoc.dir/build.make CMakeFiles/kio_sysinfo_automoc.dir/depend
make[2]: Wejście do katalogu `/home/bartek/Desktop/sysinfo-2.0'
cd /home/bartek/Desktop/sysinfo-2.0 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/bartek/Desktop/sysinfo-2.0/src /home/bartek/Desktop/sysinfo-2.0/src /home/bartek/Desktop/sysinfo-2.0 /home/bartek/Desktop/sysinfo-2.0 /home/bartek/Desktop/sysinfo-2.0/CMakeFiles/kio_sysinfo_automoc.dir/DependInfo.cmake --color=
make[2]: Opuszczenie katalogu `/home/bartek/Desktop/sysinfo-2.0'
make -f CMakeFiles/kio_sysinfo_automoc.dir/build.make CMakeFiles/kio_sysinfo_automoc.dir/build
make[2]: Wejście do katalogu `/home/bartek/Desktop/sysinfo-2.0'
/usr/bin/automoc4 /home/bartek/Desktop/sysinfo-2.0/kio_sysinfo_automoc.cpp /home/bartek/Desktop/sysinfo-2.0/src /home/bartek/Desktop/sysinfo-2.0 /usr/bin/moc-qt4 /usr/bin/cmake
make[2]: Opuszczenie katalogu `/home/bartek/Desktop/sysinfo-2.0'
/usr/bin/cmake -E cmake_progress_report /home/bartek/Desktop/sysinfo-2.0/CMakeFiles
[ 0%] Built target kio_sysinfo_automoc
make -f CMakeFiles/kio_sysinfo.dir/build.make CMakeFiles/kio_sysinfo.dir/depend
make[2]: Wejście do katalogu `/home/bartek/Desktop/sysinfo-2.0'
cd /home/bartek/Desktop/sysinfo-2.0 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/bartek/Desktop/sysinfo-2.0/src /home/bartek/Desktop/sysinfo-2.0/src /home/bartek/Desktop/sysinfo-2.0 /home/bartek/Desktop/sysinfo-2.0 /home/bartek/Desktop/sysinfo-2.0/CMakeFiles/kio_sysinfo.dir/DependInfo.cmake --color=
make[2]: Opuszczenie katalogu `/home/bartek/Desktop/sysinfo-2.0'
make -f CMakeFiles/kio_sysinfo.dir/build.make CMakeFiles/kio_sysinfo.dir/build
make[2]: Wejście do katalogu `/home/bartek/Desktop/sysinfo-2.0'
/usr/bin/cmake -E cmake_progress_report /home/bartek/Desktop/sysinfo-2.0/CMakeFiles 2
[ 25%] Building CXX object CMakeFiles/kio_sysinfo.dir/sysinfo.o
/usr/bin/c++ -Dkio_sysinfo_EXPORTS -D_BSD_SOURCE -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -DQT_NO_STL -DQT_NO_CAST_TO_ASCII -D_REENTRANT -DKDE_DEPRECATED_WARNINGS -Wnon-virtual-dtor -Wno-long-long -ansi -Wundef -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -Wformat-security -fno-exceptions -fno-check-new -fno-common -Woverloaded-virtual -fno-threadsafe-statics -fvisibility=hidden -fvisibility-inlines-hidden -O2 -g -fPIC -I/home/bartek/Desktop/sysinfo-2.0 -I/home/bartek/Desktop/sysinfo-2.0/src -I/usr/include/KDE -I/usr/include/qt4/KDE -I/usr/include/qt4 -I/usr/include/qt4/phonon -I/usr/include/qt4/QtXmlPatterns -I/usr/include/qt4/QtWebKit -I/usr/include/qt4/QtHelp -I/usr/include/qt4/QtAssistant -I/usr/include/qt4/QtDBus -I/usr/include/qt4/QtTest -I/usr/include/qt4/QtUiTools -I/usr/include/qt4/QtScript -I/usr/include/qt4/QtSvg -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtSql -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtNetwork -I/usr/include/qt4/QtDesigner -I/usr/include/qt4/Qt3Support -I/usr/include/qt4/QtGui -I/usr/include/qt4/QtCore -I/usr/include/qt4/Qt -I/usr/share/qt4/mkspecs/default -D_GNU_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o CMakeFiles/kio_sysinfo.dir/sysinfo.o -c /home/bartek/Desktop/sysinfo-2.0/src/sysinfo.cpp
In file included from /usr/include/hal/libhal.h:34,
from /home/bartek/Desktop/sysinfo-2.0/src/sysinfo.cpp:51:
/usr/include/dbus-1.0/dbus/dbus.h:29:33: error: dbus/dbus-arch-deps.h: Nie ma takiego pliku ani katalogu
/usr/include/dbus-1.0/dbus/dbus.h:30:31: error: dbus/dbus-address.h: Nie ma takiego pliku ani katalogu
/usr/include/dbus-1.0/dbus/dbus.h:31:27: error: dbus/dbus-bus.h: Nie ma takiego pliku ani katalogu
/usr/include/dbus-1.0/dbus/dbus.h:32:34: error: dbus/dbus-connection.h: Nie ma takiego pliku ani katalogu
/usr/include/dbus-1.0/dbus/dbus.h:33:30: error: dbus/dbus-errors.h: Nie ma takiego pliku ani katalogu
/usr/include/dbus-1.0/dbus/dbus.h:34:30: error: dbus/dbus-macros.h: Nie ma takiego pliku ani katalogu
/usr/include/dbus-1.0/dbus/dbus.h:35:31: error: dbus/dbus-message.h: Nie ma takiego pliku ani katalogu
/usr/include/dbus-1.0/dbus/dbus.h:36:28: error: dbus/dbus-misc.h: Nie ma takiego pliku ani katalogu
/usr/include/dbus-1.0/dbus/dbus.h:37:36: error: dbus/dbus-pending-call.h: Nie ma takiego pliku ani katalogu
/usr/include/dbus-1.0/dbus/dbus.h:38:32: error: dbus/dbus-protocol.h: Nie ma takiego pliku ani katalogu
/usr/include/dbus-1.0/dbus/dbus.h:39:30: error: dbus/dbus-server.h: Nie ma takiego pliku ani katalogu
/usr/include/dbus-1.0/dbus/dbus.h:40:30: error: dbus/dbus-shared.h: Nie ma takiego pliku ani katalogu
/usr/include/dbus-1.0/dbus/dbus.h:41:33: error: dbus/dbus-signature.h: Nie ma takiego pliku ani katalogu
/usr/include/dbus-1.0/dbus/dbus.h:42:31: error: dbus/dbus-threads.h: Nie ma takiego pliku ani katalogu
/usr/include/dbus-1.0/dbus/dbus.h:43:29: error: dbus/dbus-types.h: Nie ma takiego pliku ani katalogu
In file included from /home/bartek/Desktop/sysinfo-2.0/src/sysinfo.cpp:51:
/usr/include/hal/libhal.h:88: error: ‘DBUS_TYPE_INVALID’ was not declared in this scope
/usr/include/hal/libhal.h:91: error: ‘DBUS_TYPE_INT32’ was not declared in this scope
/usr/include/hal/libhal.h:94: error: ‘DBUS_TYPE_UINT64’ was not declared in this scope
/usr/include/hal/libhal.h:97: error: ‘DBUS_TYPE_DOUBLE’ was not declared in this scope
/usr/include/hal/libhal.h:100: error: ‘DBUS_TYPE_BOOLEAN’ was not declared in this scope
/usr/include/hal/libhal.h:103: error: ‘DBUS_TYPE_STRING’ was not declared in this scope
/usr/include/hal/libhal.h:106: error: ‘DBUS_TYPE_STRING’ was not declared in this scope
/usr/include/hal/libhal.h:124: error: ‘DBusConnection’ has not been declared
/usr/include/hal/libhal.h:185: error: ‘dbus_bool_t’ has not been declared
/usr/include/hal/libhal.h:186: error: ‘dbus_bool_t’ has not been declared
/usr/include/hal/libhal.h:292: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:295: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:298: error: expected constructor, destructor, or type conversion before ‘*’ token
/usr/include/hal/libhal.h:301: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:307: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:310: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:313: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:316: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:319: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:322: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:325: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:328: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:331: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:334: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:337: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:340: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:343: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:346: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:349: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:352: error: ‘DBusError’ was not declared in this scope
/usr/include/hal/libhal.h:352: error: ‘error’ was not declared in this scope
/usr/include/hal/libhal.h:355: error: ‘DBusError’ has not been declared
/usr/include/hal/libhal.h:358: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:361: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:364: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:373: error: ‘DBusError’ has not been declared
/usr/include/hal/libhal.h:376: error: ‘dbus_int32_t’ does not name a type
/usr/include/hal/libhal.h:382: error: ‘dbus_uint64_t’ does not name a type
/usr/include/hal/libhal.h:391: error: ‘DBusError’ has not been declared
/usr/include/hal/libhal.h:394: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:403: error: ‘DBusError’ has not been declared
/usr/include/hal/libhal.h:406: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:413: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:420: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:427: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:434: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:441: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:448: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:455: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:462: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:469: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:478: error: ‘DBusError’ has not been declared
/usr/include/hal/libhal.h:485: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:489: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:493: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:497: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:501: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:505: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:509: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:519: error: ‘DBusError’ has not been declared
/usr/include/hal/libhal.h:522: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:544: error: ‘dbus_int32_t’ does not name a type
/usr/include/hal/libhal.h:547: error: ‘dbus_uint64_t’ does not name a type
/usr/include/hal/libhal.h:553: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:580: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:595: error: ‘dbus_int32_t’ does not name a type
/usr/include/hal/libhal.h:598: error: ‘dbus_uint64_t’ does not name a type
/usr/include/hal/libhal.h:604: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:621: error: ‘DBusError’ has not been declared
/usr/include/hal/libhal.h:627: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:636: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:641: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:647: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:660: error: ‘DBusError’ has not been declared
/usr/include/hal/libhal.h:663: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:671: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:680: error: ‘DBusError’ has not been declared
/usr/include/hal/libhal.h:685: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:691: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:696: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:701: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:708: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:712: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:716: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:721: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:728: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:735: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:737: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:740: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:747: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:753: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:759: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:764: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:771: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:781: error: ‘DBusError’ has not been declared
/home/bartek/Desktop/sysinfo-2.0/src/sysinfo.cpp: In member function ‘virtual void kio_sysinfoProtocol::get(const KUrl&)’:
/home/bartek/Desktop/sysinfo-2.0/src/sysinfo.cpp:286: warning: comparison between signed and unsigned integer expressions
/home/bartek/Desktop/sysinfo-2.0/src/sysinfo.cpp: At global scope:
/home/bartek/Desktop/sysinfo-2.0/src/sysinfo.cpp:596: warning: unused parameter ‘name’
make[2]: *** [CMakeFiles/kio_sysinfo.dir/sysinfo.o] Błąd 1
make[2]: Opuszczenie katalogu `/home/bartek/Desktop/sysinfo-2.0'
make[1]: *** [CMakeFiles/kio_sysinfo.dir/all] Błąd 2
make[1]: Opuszczenie katalogu `/home/bartek/Desktop/sysinfo-2.0'
make: *** [all] Błąd 2
Shade:/home/bartek/Desktop/sysinfo-2.0#
Jak to teraz rozważać, a może ktoś mi to zrobi u siebie dam paczkę z kio sysinfo 2.0?