Polskie Forum Użytkowników Debiana

Witam. Tu zaczalem problem wczesniej http://debian.linux.pl/viewtopic.php?t= ... iew=newest

I nadal go mam, ale juz wiem, ze niestety taka wydajnosc bedzie jesli sie przestawi w biosie na tryb ide kontrolera sata. Wiec trzeba przejsc na sata (wtedy jest wydajnosc dobra). Ale mam problem z kernelem i obsluga ich10 i lilo. Sciagnalem patcha do ich10 (ponizej patch jaki znalazlem):

Kod: Zaznacz cały

Documentation/i2c/busses/i2c-i801 |    3 ++-
 drivers/i2c/busses/Kconfig        |    2 ++
 drivers/i2c/busses/i2c-i801.c     |   10 ++++++++--
 3 files changed, 12 insertions(+), 3 deletions(-)

diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
index 3bd9583..c31e029 100644
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -12,8 +12,9 @@ Supported adapters:
   * Intel 82801G (ICH7)
   * Intel 631xESB/632xESB (ESB2)
   * Intel 82801H (ICH8)
-  * Intel ICH9
+  * Intel 82801I (ICH9)
   * Intel Tolapai
+  * Intel ICH10
    Datasheets: Publicly available at the Intel website
 
 Authors: 
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index b61f56b..476b0bb 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -177,6 +177,8 @@ config I2C_I801
 	    ESB2
 	    ICH8
 	    ICH9
+	    Tolapai
+	    ICH10
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index aa91579..b0f771f 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -40,7 +40,9 @@
   82801G   (ICH7)       0x27da     32     hard     yes     yes     yes
   82801H   (ICH8)       0x283e     32     hard     yes     yes     yes
   82801I   (ICH9)       0x2930     32     hard     yes     yes     yes
-  Tolapai               0x5032     32     hard     yes     ?       ?
+  Tolapai               0x5032     32     hard     yes     yes     yes
+  ICH10                 0x3a30     32     hard     yes     yes     yes
+  ICH10                 0x3a60     32     hard     yes     yes     yes
 
   Features supported by this driver:
   Software PEC                     no
@@ -588,6 +590,8 @@ static struct pci_device_id i801_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_5) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_6) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TOLAPAI_1) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_4) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_5) },
 	{ 0, }
 };
 
@@ -608,10 +612,12 @@ static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id
 	case PCI_DEVICE_ID_INTEL_ESB2_17:
 	case PCI_DEVICE_ID_INTEL_ICH8_5:
 	case PCI_DEVICE_ID_INTEL_ICH9_6:
+	case PCI_DEVICE_ID_INTEL_TOLAPAI_1:
+	case PCI_DEVICE_ID_INTEL_ICH10_4:
+	case PCI_DEVICE_ID_INTEL_ICH10_5:
 		i801_features |= FEATURE_I2C_BLOCK_READ;
 		/* fall through */
 	case PCI_DEVICE_ID_INTEL_82801DB_3:
-	case PCI_DEVICE_ID_INTEL_TOLAPAI_1:
 		i801_features |= FEATURE_SMBUS_PEC;
 		i801_features |= FEATURE_BLOCK_BUFFER;
 		break;

Zapisalem to jaki plik intel.patch.

Daje komende:

Kod: Zaznacz cały

 patch -p1 < intel.patch

i mam taki komunikat:

Kod: Zaznacz cały

patching file Documentation/i2c/busses/i2c-i801
patching file drivers/i2c/busses/Kconfig
patching file drivers/i2c/busses/i2c-i801.c
Hunk #1 FAILED at 40.
Hunk #2 FAILED at 590.
Hunk #3 FAILED at 612.
3 out of 3 hunks FAILED -- saving rejects to file drivers/i2c/busses/i2c-i801.c.rej

Czyzbym cos popsul? Moze ktos posiada patch do ich10 z pliku i moglby go wyslac?

Dalej...

lilo, nie rozumiem dlaczego z jajkiem 2.6 sa takie problemy, z 2.4 nie mialem nigdy problemow.

Chodzi mi o przejscie z kontrolera hda na sda.

Robie to tak:

1. zmiana w biosie
2. knoppix wybotowany
3. mkdir /new
4. mount /dev/sda1 /new
5. chroot /new
6. edycja lilo.conf i fstab - odpowiednie wpisy zamienione z hda na sda
7. lilo
8. umount /dev/sda1
9. Restart Knoppiksa i start z dysku.

Czy ta kolejnosc jest dobrze? Przepraszam, ze pytam ale juz trace cpierliwosc do tej plyty gigabyte z ch10.

[Dodano: 2008-11-18, 15:48]

Przejrzałem ten plik i2c-i801.c, patch nie zrobil zadnych zmian w nim.

Jakas sugestia jak to powinno byc?

Polskie Forum Użytkowników Debiana

lilo problem - z hda na sda

lilo problem - z hda na sda