: 18 października 2009, 17:00
Dołączam się do pytania Kesyi. Mam nokię 6030 i również nie działa mi połączenie kablem USB. Sytuację mam chyba identyczną, system widzi kabel ale podłączonej komórki nie.
Kod: Zaznacz cały
# lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 6547:0232 Arkmicro Technologies Inc. ARK3116 Serial
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubKod: Zaznacz cały
# dmesg | tail -n50
[ 1673.202211] usb 1-1: Product: DataTraveler 2.0
[ 1673.202214] usb 1-1: Manufacturer: Kingston
[ 1673.202217] usb 1-1: SerialNumber: 00137299805EF981C62408CE
[ 1673.202334] usb 1-1: configuration #1 chosen from 1 choice
[ 1673.203137] scsi3 : SCSI emulation for USB Mass Storage devices
[ 1673.203292] usb-storage: device found at 4
[ 1673.203297] usb-storage: waiting for device to settle before scanning
[ 1678.200236] usb-storage: device scan complete
[ 1678.200700] scsi 3:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
[ 1678.202836] sd 3:0:0:0: [sdc] 15654848 512-byte hardware sectors: (8.01 GB/7.46 GiB)
[ 1678.203315] sd 3:0:0:0: [sdc] Write Protect is off
[ 1678.203323] sd 3:0:0:0: [sdc] Mode Sense: 16 07 09 51
[ 1678.203327] sd 3:0:0:0: [sdc] Assuming drive cache: write through
[ 1678.206132] sd 3:0:0:0: [sdc] Assuming drive cache: write through
[ 1678.206143] sdc: sdc1
[ 1678.208060] sd 3:0:0:0: [sdc] Attached SCSI removable disk
[ 1687.716020] usb 2-2: new full speed USB device using uhci_hcd and address 3
[ 1687.879022] usb 2-2: New USB device found, idVendor=6547, idProduct=0232
[ 1687.879028] usb 2-2: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 1687.879032] usb 2-2: Product: USB-UART Controller
[ 1687.879035] usb 2-2: Manufacturer: ArkMicroChips
[ 1687.879149] usb 2-2: configuration #1 chosen from 1 choice
[ 1687.883881] ark3116 2-2:1.0: ark3116 converter detected
[ 1687.913147] usb 2-2: ark3116 converter now attached to ttyUSB0
[ 2348.570777] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 2370.776821] FAT: Filesystem panic (dev sdc1)
[ 2370.776827] fat_free_clusters: deleting FAT entry beyond EOF
[ 2370.776832] File system has been set read-only
[ 2476.337473] usb 1-1: USB disconnect, address 4
[ 2489.300111] usb 1-1: new high speed USB device using ehci_hcd and address 6
[ 2489.434171] usb 1-1: New USB device found, idVendor=0951, idProduct=1607
[ 2489.434177] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2489.434181] usb 1-1: Product: DataTraveler 2.0
[ 2489.434184] usb 1-1: Manufacturer: Kingston
[ 2489.434187] usb 1-1: SerialNumber: 00137299805EF981C62408CE
[ 2489.434311] usb 1-1: configuration #1 chosen from 1 choice
[ 2489.435124] scsi4 : SCSI emulation for USB Mass Storage devices
[ 2489.435494] usb-storage: device found at 6
[ 2489.435499] usb-storage: waiting for device to settle before scanning
[ 2494.432210] usb-storage: device scan complete
[ 2494.432672] scsi 4:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
[ 2494.438427] sd 4:0:0:0: [sdd] 15654848 512-byte hardware sectors: (8.01 GB/7.46 GiB)
[ 2494.438921] sd 4:0:0:0: [sdd] Write Protect is off
[ 2494.438928] sd 4:0:0:0: [sdd] Mode Sense: 16 07 09 51
[ 2494.438933] sd 4:0:0:0: [sdd] Assuming drive cache: write through
[ 2494.442149] sd 4:0:0:0: [sdd] Assuming drive cache: write through
[ 2494.442161] sdd: sdd1
[ 2494.443026] sd 4:0:0:0: [sdd] Attached SCSI removable disk
[ 2499.541526] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 3063.620354] usb 1-1: USB disconnect, address 6