Cmake b

foreste · Post autor: **foreste** » 11 sierpnia 2009, 04:08

Mam problem skonfigurowaniu makefile przy użyciu cmake, cmake z repozytorium Squeeze i źródłowe ze strony cmake. Chyba działa ta z repozytorium.

Taki błąd mam:

Kod: Zaznacz cały

bartek@Shade:~/Desktop/sysinfo-2.0/build$ cmake .. -DCMAKE_INSTALL_PREFIX=`kde4-config --prefix`
CMake Error at CMakeLists.txt:7 (kde4_add_plugin):                                              
  Unknown CMake command "kde4_add_plugin".                                                      


CMake Warning (dev) in CMakeLists.txt:
  No cmake_minimum_required command is present.  A line of code such as

    cmake_minimum_required(VERSION 2.6)

  should be added at the top of the file.  The version specified may be lower
  if you wish to support older CMake versions for this project.  For more
  information run "cmake --help-policy CMP0000".
This warning is for project developers.  Use -Wno-dev to suppress it.

-- Configuring incomplete, errors occurred!
bartek@Shade:~/Desktop/sysinfo-2.0/build$ cmake --help-policy CMP0000
cmake version 2.6-patch 4

Jaki sposób na to jest?

kiko80 · Post autor: **kiko80** » 11 sierpnia 2009, 10:02

W pliku CMakeLists.txt na początku dodaj tą linię

Kod: Zaznacz cały

cmake_minimum_required(VERSION 2.6.0)

set(KDE_MIN_VERSION "4.00.82")

find_package(KDE4 REQUIRED)
include(KDE4Defaults)
include(MacroLibrary)
include(CheckIncludeFile)

add_definitions (${QT_DEFINITIONS} ${KDE4_DEFINITIONS})

include_directories(${CMAKE_SOURCE_DIR} ${CMAKE_BINARY_DIR} ${KDE4_INCLUDES}
${KDE4_INCLUDE_DIR} ${QT_INCLUDES})

foreste · Post autor: **foreste** » 11 sierpnia 2009, 13:57

Cmake poszlo succes ;-)
ale przy make mam takie błędy

Kod: Zaznacz cały

bartek@Shade:~/Desktop/sysinfo-2.0$ make
/usr/bin/cmake -H/home/bartek/Desktop/sysinfo-2.0/src -B/home/bartek/Desktop/sysinfo-2.0 --check-build-system CMakeFiles/Makefile.cmake 0
/usr/bin/cmake -E cmake_progress_start /home/bartek/Desktop/sysinfo-2.0/CMakeFiles /home/bartek/Desktop/sysinfo-2.0/CMakeFiles/progress.make                                                                                                                                          
make -f CMakeFiles/Makefile2 all                                                                                                           
make[1]: Wejście do katalogu `/home/bartek/Desktop/sysinfo-2.0'                                                                            
make -f CMakeFiles/kio_sysinfo_automoc.dir/build.make CMakeFiles/kio_sysinfo_automoc.dir/depend                                            
make[2]: Wejście do katalogu `/home/bartek/Desktop/sysinfo-2.0'                                                                            
cd /home/bartek/Desktop/sysinfo-2.0 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/bartek/Desktop/sysinfo-2.0/src /home/bartek/Desktop/sysinfo-2.0/src /home/bartek/Desktop/sysinfo-2.0 /home/bartek/Desktop/sysinfo-2.0 /home/bartek/Desktop/sysinfo-2.0/CMakeFiles/kio_sysinfo_automoc.dir/DependInfo.cmake --color=                                                                                                
make[2]: Opuszczenie katalogu `/home/bartek/Desktop/sysinfo-2.0'                                                                           
make -f CMakeFiles/kio_sysinfo_automoc.dir/build.make CMakeFiles/kio_sysinfo_automoc.dir/build                                             
make[2]: Wejście do katalogu `/home/bartek/Desktop/sysinfo-2.0'                                                                            
/usr/bin/automoc4 /home/bartek/Desktop/sysinfo-2.0/kio_sysinfo_automoc.cpp /home/bartek/Desktop/sysinfo-2.0/src /home/bartek/Desktop/sysinfo-2.0 /usr/bin/moc-qt4 /usr/bin/cmake                                                                                                      
make[2]: Opuszczenie katalogu `/home/bartek/Desktop/sysinfo-2.0'                                                                           
/usr/bin/cmake -E cmake_progress_report /home/bartek/Desktop/sysinfo-2.0/CMakeFiles                                                        
[  0%] Built target kio_sysinfo_automoc                                                                                                    
make -f CMakeFiles/kio_sysinfo.dir/build.make CMakeFiles/kio_sysinfo.dir/depend                                                            
make[2]: Wejście do katalogu `/home/bartek/Desktop/sysinfo-2.0'                                                                            
cd /home/bartek/Desktop/sysinfo-2.0 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/bartek/Desktop/sysinfo-2.0/src /home/bartek/Desktop/sysinfo-2.0/src /home/bartek/Desktop/sysinfo-2.0 /home/bartek/Desktop/sysinfo-2.0 /home/bartek/Desktop/sysinfo-2.0/CMakeFiles/kio_sysinfo.dir/DependInfo.cmake --color=                                                                                                        
make[2]: Opuszczenie katalogu `/home/bartek/Desktop/sysinfo-2.0'                                                                           
make -f CMakeFiles/kio_sysinfo.dir/build.make CMakeFiles/kio_sysinfo.dir/build                                                             
make[2]: Wejście do katalogu `/home/bartek/Desktop/sysinfo-2.0'                                                                            
/usr/bin/cmake -E cmake_progress_report /home/bartek/Desktop/sysinfo-2.0/CMakeFiles 2                                                      
[ 25%] Building CXX object CMakeFiles/kio_sysinfo.dir/sysinfo.o                                                                            
/usr/bin/c++   -Dkio_sysinfo_EXPORTS -D_BSD_SOURCE -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -DQT_NO_STL -DQT_NO_CAST_TO_ASCII -D_REENTRANT -DKDE_DEPRECATED_WARNINGS -Wnon-virtual-dtor -Wno-long-long -ansi -Wundef -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -Wformat-security -fno-exceptions -fno-check-new -fno-common -Woverloaded-virtual -fno-threadsafe-statics -fvisibility=hidden -fvisibility-inlines-hidden -O2 -g -fPIC -I/home/bartek/Desktop/sysinfo-2.0 -I/home/bartek/Desktop/sysinfo-2.0/src -I/usr/include/KDE -I/usr/include/qt4/KDE -I/usr/include/qt4 -I/usr/include/qt4/phonon -I/usr/include/qt4/QtXmlPatterns -I/usr/include/qt4/QtWebKit -I/usr/include/qt4/QtHelp -I/usr/include/qt4/QtAssistant -I/usr/include/qt4/QtDBus -I/usr/include/qt4/QtTest -I/usr/include/qt4/QtUiTools -I/usr/include/qt4/QtScript -I/usr/include/qt4/QtSvg -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtSql -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtNetwork -I/usr/include/qt4/QtDesigner -I/usr/include/qt4/Qt3Support -I/usr/include/qt4/QtGui -I/usr/include/qt4/QtCore -I/usr/include/qt4/Qt -I/usr/share/qt4/mkspecs/default   -D_GNU_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o CMakeFiles/kio_sysinfo.dir/sysinfo.o -c /home/bartek/Desktop/sysinfo-2.0/src/sysinfo.cpp                                                                                                                           
In file included from /home/bartek/Desktop/sysinfo-2.0/src/sysinfo.cpp:51:                                                                 
/usr/include/hal/libhal.h:34:23: error: dbus/dbus.h: Nie ma takiego pliku ani katalogu                                                     
In file included from /home/bartek/Desktop/sysinfo-2.0/src/sysinfo.cpp:51:                                                                 
/usr/include/hal/libhal.h:88: error: ‘DBUS_TYPE_INVALID’ was not declared in this scope                                                    
/usr/include/hal/libhal.h:91: error: ‘DBUS_TYPE_INT32’ was not declared in this scope                                                      
/usr/include/hal/libhal.h:94: error: ‘DBUS_TYPE_UINT64’ was not declared in this scope                                                     
/usr/include/hal/libhal.h:97: error: ‘DBUS_TYPE_DOUBLE’ was not declared in this scope                                                     
/usr/include/hal/libhal.h:100: error: ‘DBUS_TYPE_BOOLEAN’ was not declared in this scope                                                   
/usr/include/hal/libhal.h:103: error: ‘DBUS_TYPE_STRING’ was not declared in this scope                                                    
/usr/include/hal/libhal.h:106: error: ‘DBUS_TYPE_STRING’ was not declared in this scope                                                    
/usr/include/hal/libhal.h:124: error: ‘DBusConnection’ has not been declared                                                               
/usr/include/hal/libhal.h:185: error: ‘dbus_bool_t’ has not been declared                                                                  
/usr/include/hal/libhal.h:186: error: ‘dbus_bool_t’ has not been declared                                                                  
/usr/include/hal/libhal.h:292: error: ‘dbus_bool_t’ does not name a type                                                                   
/usr/include/hal/libhal.h:295: error: ‘dbus_bool_t’ does not name a type                                                                   
/usr/include/hal/libhal.h:298: error: expected constructor, destructor, or type conversion before ‘*’ token                                
/usr/include/hal/libhal.h:301: error: ‘dbus_bool_t’ does not name a type                                                                   
/usr/include/hal/libhal.h:307: error: ‘dbus_bool_t’ does not name a type                                                                   
/usr/include/hal/libhal.h:310: error: ‘dbus_bool_t’ does not name a type                                                                   
/usr/include/hal/libhal.h:313: error: ‘dbus_bool_t’ does not name a type                                                                   
/usr/include/hal/libhal.h:316: error: ‘dbus_bool_t’ does not name a type                                                                   
/usr/include/hal/libhal.h:319: error: ‘dbus_bool_t’ does not name a type                                                                   
/usr/include/hal/libhal.h:322: error: ‘dbus_bool_t’ does not name a type                                                                   
/usr/include/hal/libhal.h:325: error: ‘dbus_bool_t’ does not name a type                                                                   
/usr/include/hal/libhal.h:328: error: ‘dbus_bool_t’ does not name a type                                                                   
/usr/include/hal/libhal.h:331: error: ‘dbus_bool_t’ does not name a type                                                                   
/usr/include/hal/libhal.h:334: error: ‘dbus_bool_t’ does not name a type                                                                   
/usr/include/hal/libhal.h:337: error: ‘dbus_bool_t’ does not name a type                                                                   
/usr/include/hal/libhal.h:340: error: ‘dbus_bool_t’ does not name a type                                                                   
/usr/include/hal/libhal.h:343: error: ‘dbus_bool_t’ does not name a type                                                                   
/usr/include/hal/libhal.h:346: error: ‘dbus_bool_t’ does not name a type                                                                   
/usr/include/hal/libhal.h:349: error: ‘dbus_bool_t’ does not name a type                                                                   
/usr/include/hal/libhal.h:352: error: ‘DBusError’ was not declared in this scope                                                           
/usr/include/hal/libhal.h:352: error: ‘error’ was not declared in this scope                                                               
/usr/include/hal/libhal.h:355: error: ‘DBusError’ has not been declared                                                                    
/usr/include/hal/libhal.h:358: error: ‘dbus_bool_t’ does not name a type                                                                   
/usr/include/hal/libhal.h:361: error: ‘dbus_bool_t’ does not name a type                                                                   
/usr/include/hal/libhal.h:364: error: ‘dbus_bool_t’ does not name a type                                                                   
/usr/include/hal/libhal.h:373: error: ‘DBusError’ has not been declared                                                                    
/usr/include/hal/libhal.h:376: error: ‘dbus_int32_t’ does not name a type                                                                  
/usr/include/hal/libhal.h:382: error: ‘dbus_uint64_t’ does not name a type                                                                 
/usr/include/hal/libhal.h:391: error: ‘DBusError’ has not been declared                                                                    
/usr/include/hal/libhal.h:394: error: ‘dbus_bool_t’ does not name a type                                                                   
/usr/include/hal/libhal.h:403: error: ‘DBusError’ has not been declared                                                                    
/usr/include/hal/libhal.h:406: error: ‘dbus_bool_t’ does not name a type                                                                   
/usr/include/hal/libhal.h:413: error: ‘dbus_bool_t’ does not name a type                                                                   
/usr/include/hal/libhal.h:420: error: ‘dbus_bool_t’ does not name a type                                                                   
/usr/include/hal/libhal.h:427: error: ‘dbus_bool_t’ does not name a type                                                                   
/usr/include/hal/libhal.h:434: error: ‘dbus_bool_t’ does not name a type                                                                   
/usr/include/hal/libhal.h:441: error: ‘dbus_bool_t’ does not name a type                                                                   
/usr/include/hal/libhal.h:448: error: ‘dbus_bool_t’ does not name a type                                                                   
/usr/include/hal/libhal.h:455: error: ‘dbus_bool_t’ does not name a type                                                                   
/usr/include/hal/libhal.h:462: error: ‘dbus_bool_t’ does not name a type                                                                   
/usr/include/hal/libhal.h:469: error: ‘dbus_bool_t’ does not name a type                                                                   
/usr/include/hal/libhal.h:478: error: ‘DBusError’ has not been declared                                                                    
/usr/include/hal/libhal.h:485: error: ‘dbus_bool_t’ does not name a type                                                                   
/usr/include/hal/libhal.h:489: error: ‘dbus_bool_t’ does not name a type                                                                   
/usr/include/hal/libhal.h:493: error: ‘dbus_bool_t’ does not name a type                                                                   
/usr/include/hal/libhal.h:497: error: ‘dbus_bool_t’ does not name a type                                                                   
/usr/include/hal/libhal.h:501: error: ‘dbus_bool_t’ does not name a type                                                                   
/usr/include/hal/libhal.h:505: error: ‘dbus_bool_t’ does not name a type                                                                   
/usr/include/hal/libhal.h:509: error: ‘dbus_bool_t’ does not name a type                                                                   
/usr/include/hal/libhal.h:519: error: ‘DBusError’ has not been declared
/usr/include/hal/libhal.h:522: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:544: error: ‘dbus_int32_t’ does not name a type
/usr/include/hal/libhal.h:547: error: ‘dbus_uint64_t’ does not name a type
/usr/include/hal/libhal.h:553: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:580: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:595: error: ‘dbus_int32_t’ does not name a type
/usr/include/hal/libhal.h:598: error: ‘dbus_uint64_t’ does not name a type
/usr/include/hal/libhal.h:604: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:621: error: ‘DBusError’ has not been declared
/usr/include/hal/libhal.h:627: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:636: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:641: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:647: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:660: error: ‘DBusError’ has not been declared
/usr/include/hal/libhal.h:663: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:671: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:680: error: ‘DBusError’ has not been declared
/usr/include/hal/libhal.h:685: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:691: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:696: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:701: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:708: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:712: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:716: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:721: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:728: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:735: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:737: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:740: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:747: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:753: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:759: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:764: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:771: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:781: error: ‘DBusError’ has not been declared
/home/bartek/Desktop/sysinfo-2.0/src/sysinfo.cpp: In member function ‘virtual void kio_sysinfoProtocol::get(const KUrl&)’:
/home/bartek/Desktop/sysinfo-2.0/src/sysinfo.cpp:286: warning: comparison between signed and unsigned integer expressions
/home/bartek/Desktop/sysinfo-2.0/src/sysinfo.cpp: At global scope:
/home/bartek/Desktop/sysinfo-2.0/src/sysinfo.cpp:596: warning: unused parameter ‘name’
make[2]: *** [CMakeFiles/kio_sysinfo.dir/sysinfo.o] Błąd 1
make[2]: Opuszczenie katalogu `/home/bartek/Desktop/sysinfo-2.0'
make[1]: *** [CMakeFiles/kio_sysinfo.dir/all] Błąd 2
make[1]: Opuszczenie katalogu `/home/bartek/Desktop/sysinfo-2.0'
make: *** [all] Błąd 2

co mi brakuje tzn pakiet ?.

tomii · Post autor: **tomii** » 11 sierpnia 2009, 14:35

Może libdbus-dev?

foreste · Post autor: **foreste** » 11 sierpnia 2009, 14:48

tomii pisze:Może libdbus-dev?

Akurat to mam ale wraz błędy są :-? .

tomii · Post autor: **tomii** » 11 sierpnia 2009, 14:53

Według tego plik dbus.h jest w pakiecie libdbus-1-dev, zobacz w programie, czy ścieżka do niego jest poprawna. A configure nie wymagało podania jakiś ścieżek?

foreste · Post autor: **foreste** » 11 sierpnia 2009, 16:21

Po cmake nie ma ./configure, od razu jest make i make install.

kiko80 · Post autor: **kiko80** » 11 sierpnia 2009, 16:39

foreste pisze:/usr/include/hal/libhal.h:34:23: error: dbus/dbus.h: Nie ma takiego pliku ani katalogu

tu leży problem lecz pomimo zainstalowania wszystkiego co miało dbus-dev hal-dev nadal nie chce ruszyć.

Make już jako root.

tomii · Post autor: **tomii** » 11 sierpnia 2009, 16:46

Dziwne, w pliku libhal.h jest:

Kod: Zaznacz cały

include <dbus/dbus.h>

a poprawnie, przynajmniej w moim systemie to:

Kod: Zaznacz cały

include <dbus-1.0/dbus/dbus.h>

foreste · Post autor: **foreste** » 11 sierpnia 2009, 17:21

Poprawiłem u siebie i teraz mi wyświetla błędy takie:

Kod: Zaznacz cały

Shade:/home/bartek/Desktop/sysinfo-2.0# make                                                
/usr/bin/cmake -H/home/bartek/Desktop/sysinfo-2.0/src -B/home/bartek/Desktop/sysinfo-2.0 --check-build-system CMakeFiles/Makefile.cmake 0                                               
/usr/bin/cmake -E cmake_progress_start /home/bartek/Desktop/sysinfo-2.0/CMakeFiles /home/bartek/Desktop/sysinfo-2.0/CMakeFiles/progress.make                                            
make -f CMakeFiles/Makefile2 all                                                            
make[1]: Wejście do katalogu `/home/bartek/Desktop/sysinfo-2.0'                             
make -f CMakeFiles/kio_sysinfo_automoc.dir/build.make CMakeFiles/kio_sysinfo_automoc.dir/depend                                                                                         
make[2]: Wejście do katalogu `/home/bartek/Desktop/sysinfo-2.0'                             
cd /home/bartek/Desktop/sysinfo-2.0 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/bartek/Desktop/sysinfo-2.0/src /home/bartek/Desktop/sysinfo-2.0/src /home/bartek/Desktop/sysinfo-2.0 /home/bartek/Desktop/sysinfo-2.0 /home/bartek/Desktop/sysinfo-2.0/CMakeFiles/kio_sysinfo_automoc.dir/DependInfo.cmake --color=                                               
make[2]: Opuszczenie katalogu `/home/bartek/Desktop/sysinfo-2.0'                            
make -f CMakeFiles/kio_sysinfo_automoc.dir/build.make CMakeFiles/kio_sysinfo_automoc.dir/build                                                                                          
make[2]: Wejście do katalogu `/home/bartek/Desktop/sysinfo-2.0'                             
/usr/bin/automoc4 /home/bartek/Desktop/sysinfo-2.0/kio_sysinfo_automoc.cpp /home/bartek/Desktop/sysinfo-2.0/src /home/bartek/Desktop/sysinfo-2.0 /usr/bin/moc-qt4 /usr/bin/cmake        
make[2]: Opuszczenie katalogu `/home/bartek/Desktop/sysinfo-2.0'                            
/usr/bin/cmake -E cmake_progress_report /home/bartek/Desktop/sysinfo-2.0/CMakeFiles         
[  0%] Built target kio_sysinfo_automoc                                                     
make -f CMakeFiles/kio_sysinfo.dir/build.make CMakeFiles/kio_sysinfo.dir/depend             
make[2]: Wejście do katalogu `/home/bartek/Desktop/sysinfo-2.0'                             
cd /home/bartek/Desktop/sysinfo-2.0 && /usr/bin/cmake -E cmake_depends "Unix Makefiles" /home/bartek/Desktop/sysinfo-2.0/src /home/bartek/Desktop/sysinfo-2.0/src /home/bartek/Desktop/sysinfo-2.0 /home/bartek/Desktop/sysinfo-2.0 /home/bartek/Desktop/sysinfo-2.0/CMakeFiles/kio_sysinfo.dir/DependInfo.cmake --color=                                                       
make[2]: Opuszczenie katalogu `/home/bartek/Desktop/sysinfo-2.0'                            
make -f CMakeFiles/kio_sysinfo.dir/build.make CMakeFiles/kio_sysinfo.dir/build              
make[2]: Wejście do katalogu `/home/bartek/Desktop/sysinfo-2.0'                             
/usr/bin/cmake -E cmake_progress_report /home/bartek/Desktop/sysinfo-2.0/CMakeFiles 2       
[ 25%] Building CXX object CMakeFiles/kio_sysinfo.dir/sysinfo.o                             
/usr/bin/c++   -Dkio_sysinfo_EXPORTS -D_BSD_SOURCE -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -DQT_NO_STL -DQT_NO_CAST_TO_ASCII -D_REENTRANT -DKDE_DEPRECATED_WARNINGS -Wnon-virtual-dtor -Wno-long-long -ansi -Wundef -Wcast-align -Wchar-subscripts -Wall -W -Wpointer-arith -Wformat-security -fno-exceptions -fno-check-new -fno-common -Woverloaded-virtual -fno-threadsafe-statics -fvisibility=hidden -fvisibility-inlines-hidden -O2 -g -fPIC -I/home/bartek/Desktop/sysinfo-2.0 -I/home/bartek/Desktop/sysinfo-2.0/src -I/usr/include/KDE -I/usr/include/qt4/KDE -I/usr/include/qt4 -I/usr/include/qt4/phonon -I/usr/include/qt4/QtXmlPatterns -I/usr/include/qt4/QtWebKit -I/usr/include/qt4/QtHelp -I/usr/include/qt4/QtAssistant -I/usr/include/qt4/QtDBus -I/usr/include/qt4/QtTest -I/usr/include/qt4/QtUiTools -I/usr/include/qt4/QtScript -I/usr/include/qt4/QtSvg -I/usr/include/qt4/QtXml -I/usr/include/qt4/QtSql -I/usr/include/qt4/QtOpenGL -I/usr/include/qt4/QtNetwork -I/usr/include/qt4/QtDesigner -I/usr/include/qt4/Qt3Support -I/usr/include/qt4/QtGui -I/usr/include/qt4/QtCore -I/usr/include/qt4/Qt -I/usr/share/qt4/mkspecs/default   -D_GNU_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o CMakeFiles/kio_sysinfo.dir/sysinfo.o -c /home/bartek/Desktop/sysinfo-2.0/src/sysinfo.cpp                     
In file included from /usr/include/hal/libhal.h:34,                                         
                 from /home/bartek/Desktop/sysinfo-2.0/src/sysinfo.cpp:51:                  
/usr/include/dbus-1.0/dbus/dbus.h:29:33: error: dbus/dbus-arch-deps.h: Nie ma takiego pliku ani katalogu                                                                                
/usr/include/dbus-1.0/dbus/dbus.h:30:31: error: dbus/dbus-address.h: Nie ma takiego pliku ani katalogu                                                                                  
/usr/include/dbus-1.0/dbus/dbus.h:31:27: error: dbus/dbus-bus.h: Nie ma takiego pliku ani katalogu                                                                                      
/usr/include/dbus-1.0/dbus/dbus.h:32:34: error: dbus/dbus-connection.h: Nie ma takiego pliku ani katalogu                                                                               
/usr/include/dbus-1.0/dbus/dbus.h:33:30: error: dbus/dbus-errors.h: Nie ma takiego pliku ani katalogu                                                                                   
/usr/include/dbus-1.0/dbus/dbus.h:34:30: error: dbus/dbus-macros.h: Nie ma takiego pliku ani katalogu                                                                                   
/usr/include/dbus-1.0/dbus/dbus.h:35:31: error: dbus/dbus-message.h: Nie ma takiego pliku ani katalogu                                                                                  
/usr/include/dbus-1.0/dbus/dbus.h:36:28: error: dbus/dbus-misc.h: Nie ma takiego pliku ani katalogu                                                                                     
/usr/include/dbus-1.0/dbus/dbus.h:37:36: error: dbus/dbus-pending-call.h: Nie ma takiego pliku ani katalogu                                                                             
/usr/include/dbus-1.0/dbus/dbus.h:38:32: error: dbus/dbus-protocol.h: Nie ma takiego pliku ani katalogu                                                                                 
/usr/include/dbus-1.0/dbus/dbus.h:39:30: error: dbus/dbus-server.h: Nie ma takiego pliku ani katalogu                                                                                   
/usr/include/dbus-1.0/dbus/dbus.h:40:30: error: dbus/dbus-shared.h: Nie ma takiego pliku ani katalogu                                                                                   
/usr/include/dbus-1.0/dbus/dbus.h:41:33: error: dbus/dbus-signature.h: Nie ma takiego pliku ani katalogu                                                                                
/usr/include/dbus-1.0/dbus/dbus.h:42:31: error: dbus/dbus-threads.h: Nie ma takiego pliku ani katalogu                                                                                  
/usr/include/dbus-1.0/dbus/dbus.h:43:29: error: dbus/dbus-types.h: Nie ma takiego pliku ani katalogu                                                                                    
In file included from /home/bartek/Desktop/sysinfo-2.0/src/sysinfo.cpp:51:                  
/usr/include/hal/libhal.h:88: error: ‘DBUS_TYPE_INVALID’ was not declared in this scope     
/usr/include/hal/libhal.h:91: error: ‘DBUS_TYPE_INT32’ was not declared in this scope       
/usr/include/hal/libhal.h:94: error: ‘DBUS_TYPE_UINT64’ was not declared in this scope      
/usr/include/hal/libhal.h:97: error: ‘DBUS_TYPE_DOUBLE’ was not declared in this scope      
/usr/include/hal/libhal.h:100: error: ‘DBUS_TYPE_BOOLEAN’ was not declared in this scope    
/usr/include/hal/libhal.h:103: error: ‘DBUS_TYPE_STRING’ was not declared in this scope     
/usr/include/hal/libhal.h:106: error: ‘DBUS_TYPE_STRING’ was not declared in this scope     
/usr/include/hal/libhal.h:124: error: ‘DBusConnection’ has not been declared                
/usr/include/hal/libhal.h:185: error: ‘dbus_bool_t’ has not been declared                   
/usr/include/hal/libhal.h:186: error: ‘dbus_bool_t’ has not been declared                   
/usr/include/hal/libhal.h:292: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:295: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:298: error: expected constructor, destructor, or type conversion before ‘*’ token                                                                             
/usr/include/hal/libhal.h:301: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:307: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:310: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:313: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:316: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:319: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:322: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:325: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:328: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:331: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:334: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:337: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:340: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:343: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:346: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:349: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:352: error: ‘DBusError’ was not declared in this scope            
/usr/include/hal/libhal.h:352: error: ‘error’ was not declared in this scope                
/usr/include/hal/libhal.h:355: error: ‘DBusError’ has not been declared                     
/usr/include/hal/libhal.h:358: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:361: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:364: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:373: error: ‘DBusError’ has not been declared                     
/usr/include/hal/libhal.h:376: error: ‘dbus_int32_t’ does not name a type                   
/usr/include/hal/libhal.h:382: error: ‘dbus_uint64_t’ does not name a type                  
/usr/include/hal/libhal.h:391: error: ‘DBusError’ has not been declared                     
/usr/include/hal/libhal.h:394: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:403: error: ‘DBusError’ has not been declared                     
/usr/include/hal/libhal.h:406: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:413: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:420: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:427: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:434: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:441: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:448: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:455: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:462: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:469: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:478: error: ‘DBusError’ has not been declared                     
/usr/include/hal/libhal.h:485: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:489: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:493: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:497: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:501: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:505: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:509: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:519: error: ‘DBusError’ has not been declared                     
/usr/include/hal/libhal.h:522: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:544: error: ‘dbus_int32_t’ does not name a type                   
/usr/include/hal/libhal.h:547: error: ‘dbus_uint64_t’ does not name a type                  
/usr/include/hal/libhal.h:553: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:580: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:595: error: ‘dbus_int32_t’ does not name a type                   
/usr/include/hal/libhal.h:598: error: ‘dbus_uint64_t’ does not name a type                  
/usr/include/hal/libhal.h:604: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:621: error: ‘DBusError’ has not been declared                     
/usr/include/hal/libhal.h:627: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:636: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:641: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:647: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:660: error: ‘DBusError’ has not been declared                     
/usr/include/hal/libhal.h:663: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:671: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:680: error: ‘DBusError’ has not been declared                     
/usr/include/hal/libhal.h:685: error: ‘dbus_bool_t’ does not name a type                    
/usr/include/hal/libhal.h:691: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:696: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:701: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:708: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:712: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:716: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:721: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:728: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:735: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:737: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:740: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:747: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:753: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:759: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:764: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:771: error: ‘dbus_bool_t’ does not name a type
/usr/include/hal/libhal.h:781: error: ‘DBusError’ has not been declared
/home/bartek/Desktop/sysinfo-2.0/src/sysinfo.cpp: In member function ‘virtual void kio_sysinfoProtocol::get(const KUrl&)’:
/home/bartek/Desktop/sysinfo-2.0/src/sysinfo.cpp:286: warning: comparison between signed and unsigned integer expressions
/home/bartek/Desktop/sysinfo-2.0/src/sysinfo.cpp: At global scope:
/home/bartek/Desktop/sysinfo-2.0/src/sysinfo.cpp:596: warning: unused parameter ‘name’
make[2]: *** [CMakeFiles/kio_sysinfo.dir/sysinfo.o] Błąd 1
make[2]: Opuszczenie katalogu `/home/bartek/Desktop/sysinfo-2.0'
make[1]: *** [CMakeFiles/kio_sysinfo.dir/all] Błąd 2
make[1]: Opuszczenie katalogu `/home/bartek/Desktop/sysinfo-2.0'
make: *** [all] Błąd 2
Shade:/home/bartek/Desktop/sysinfo-2.0#

Jak to teraz rozważać, a może ktoś mi to zrobi u siebie dam paczkę z kio sysinfo 2.0?

Cmake b

Cmake błąd przy kompilacji kio sysinfo