[+] WLAN - brak interfejsu w systemie

[xmms]

Moja karta:

Kod: Zaznacz cały

cross:~# lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx)
00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0)
00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1)
00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2)
00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [IDE mode]
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3a)
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 11h HyperTransport Configuration (rev 40)
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 11h Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 11h DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 11h Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 11h Link Control
01:05.0 VGA compatible controller: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics]
01:05.1 Audio device: ATI Technologies Inc RS780 Azalia controller
[b]02:00.0 Network controller: Atheros Communications Inc. Device 002a (rev 01)[/b]
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)

Gdy wykonuję polecenie ,,modprobe'' dla ,,ndiswrappera'' otrzymuję:

Kod: Zaznacz cały

cross:~# modprobe ndiswrapper-1.9
FATAL: Module ndiswrapper_1.9 not found.
cross:~# modprobe ndiswrapper
FATAL: Module ndiswrapper not found.

Zatem:

Kod: Zaznacz cały

cross:~# iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

Kod: Zaznacz cały

cross:~# ndiswrapper -l
netathw : driver installed
	device (168C:002A) present

Jak załadować moduły ndiswrappera? O dziwo działa mi wicd ale nie widzi żadnych kart bezprzewodowych.

[tomekgreen1985]

Kod: Zaznacz cały

aptitude install module-assistant
module-assistant a-i ndiswrapper

Wykonaj te polecenia w konsoli i spróbuj jeszcze raz za instalować sterownik.

[kodzik]

Karty na atherosie ładnie działają na madwifi (starsze troszkę karty), z nowszymi mogą być pewne problemy bo sterownik w jajku ath5k troszkę szwankuje. Podaj jeszcze na wszelki wypadek wynik polecenia:

Kod: Zaznacz cały

lspci -v

Spróbuj >tego< tylko bez konfiguracji w /etc/network/interfaces oraz zainstaluj WICD.

[xmms]

Przy

Kod: Zaznacz cały

module-assistant a-i ndiswrapper

Kod: Zaznacz cały

 make[4]: *** [/usr/src/modules/ndiswrapper/iw_ndis.o] Błąd 1
 make[3]: *** [_module_/usr/src/modules/ndiswrapper] Błąd 2           
 make[3]: Opuszczenie katalogu `/usr/src/linux-2.6.29.3'              
 make[2]: *** [modules] Błąd 2                                        
 make[2]: Opuszczenie katalogu `/usr/src/modules/ndiswrapper'         
 make[1]: *** [binary-modules] Błąd 2                                 
 make[1]: Opuszczenie katalogu `/usr/src/modules/ndiswrapper'         
 make: *** [kdist_build] Błąd 2

Gdy robię 2 sposobem:

Kod: Zaznacz cały

make[5]: *** [/usr/src/modules/madwifi/ath/if_ath.o] Error 1         
 make[4]: *** [/usr/src/modules/madwifi/ath] Error 2                  
 make[3]: *** [_module_/usr/src/modules/madwifi] Error 2              
 make[3]: Leaving directory `/usr/src/linux-2.6.29.3'                 
 make[2]: *** [modules] Błąd 2
 make[2]: Opuszczenie katalogu `/usr/src/modules/madwifi'
 make[1]: *** [binary-modules] Błąd 2
 make[1]: Opuszczenie katalogu `/usr/src/modules/madwifi'
 make: *** [kdist_build] Błąd 2

Kod: Zaznacz cały

02:00.0 Network controller: Atheros Communications Inc. Device 002a (rev 01)
	Subsystem: Device 1a3b:1067
	Flags: bus master, fast devsel, latency 0, IRQ 10
	Memory at fb6f0000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: [40] Power Management version 2
	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
	Capabilities: [60] Express Legacy Endpoint, MSI 00
	Capabilities: [90] MSI-X: Enable- Mask- TabSize=1
	Capabilities: [100] Advanced Error Reporting <?>
	Capabilities: [140] Virtual Channel <?>
	Capabilities: [160] Device Serial Number 00-00-00-00-00-00-00-00

03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
	Subsystem: ASUSTeK Computer Inc. Device 11f5
	Flags: bus master, fast devsel, latency 0, IRQ 28
	I/O ports at d800 [size=200]
	Memory at f7fff000 (64-bit, prefetchable) [size=4K]
	Memory at f7fe0000 (64-bit, prefetchable) [size=64K]
	Expansion ROM at fb7f0000 [disabled] [size=64K]
	Capabilities: [40] Power Management version 3
	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
	Capabilities: [70] Express Endpoint, MSI 01
	Capabilities: [b0] MSI-X: Enable- Mask- TabSize=2
	Capabilities: [d0] Vital Product Data <?>
	Capabilities: [100] Advanced Error Reporting <?>
	Capabilities: [140] Virtual Channel <?>
	Capabilities: [160] Device Serial Number 00-e0-4c-68-12-34-56-78
	Kernel driver in use: r8169
	Kernel modules: r8169

Dziwne niby widzi kartę ale nie ma sterowników z tego co wnioskuję.

[Dodano: 2009-05-13, 20:57]
http://ulek.ovh.org/index.php?show=weblog&id=11 -- według tego opisu robię.

Kod: Zaznacz cały

cross:/home/konrad# modprobe ath_pci
FATAL: Module ath_pci not found.
cross:/home/konrad# modinfo ath_pci
modinfo: could not find module ath_pci

[Dodano: 2009-05-13, 23:25]
Poradziłem sobie.

Dla nowszych kart Atheros 802.11bgn polecam korzystanie z: Konfiguracja Kart Atheros Z nowszym chipsetem