Masz problemy z siecią bądź internetem? Zapytaj tu
metiufosky
Posty: 8 Rejestracja: 09 czerwca 2008, 20:16
Lokalizacja: Tarnobrzeg
Post
autor: metiufosky » 20 marca 2009, 21:53
Przeprowadziłem testy. Jeżeli komputer był wyłączony (listwa też) mam 100% pewności, że Debian nie będzie miał internetu. To samo z restartami(nic nie pomagają). Dopiero gdy zostanie najpierw włączony Windows, a potem (uruchom ponownie) Debian jest net.
Edit:
podaje wynik ethtool eth0. Może pomoże naprowadzić na rozwiązanie
Kod: Zaznacz cały
83-1-120-99:# ethtool eth0
Settings for eth0:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pumbg
Wake-on: g
Current message level: 0x00000033 (51)
Link detected: yes
ponton
Beginner
Posty: 406 Rejestracja: 24 stycznia 2007, 01:40
Lokalizacja: Kalisz/Wroc³aw
Post
autor: ponton » 20 marca 2009, 22:06
Gdy się zalogujesz w Debianie i będziesz miał internet, to skopiuj gdzieś sobie następujące informacje:
Kod: Zaznacz cały
$ sudo ifconfig eth0
$ sudo route -n
$ cat /etc/resolv.conf
$ ping 209.85.171.100
A następnie porównaj z sytuacją, gdy nie masz internetu.
EDIT: Dopiero zauważyłem, że adres IP masz wpisany statyczny. Na pewno tak ma być?
metiufosky
Posty: 8 Rejestracja: 09 czerwca 2008, 20:16
Lokalizacja: Tarnobrzeg
Post
autor: metiufosky » 20 marca 2009, 22:26
Tak bo adres mam statyczny, a jak mam automatycznie pobierany to internet nie działa.
Edit:
A może być coś z Wake-on?
Ister
Junior Member
Posty: 566 Rejestracja: 05 marca 2009, 12:42
Post
autor: Ister » 20 marca 2009, 22:53
Wprawdzie domyślam się wyniku, ale podrzuć jeszcze wynik route (najchętniej wersje z siecią i bez, ale bez sieci interesuje mnie bardziej).
Czy w logach zgłasza Ci link up?
metiufosky
Posty: 8 Rejestracja: 09 czerwca 2008, 20:16
Lokalizacja: Tarnobrzeg
Post
autor: metiufosky » 21 marca 2009, 16:15
Gdy jest internet:
Kod: Zaznacz cały
83-1-120-99:/home/fosky# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
83.1.120.0 * 255.255.255.0 U 0 0 0 eth0
default 83-1-120-1.tsm. 0.0.0.0 UG 0 0 0 eth0
Gdy internetu nie ma:
Kod: Zaznacz cały
83-1-120-99:/home/fosky# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
83.1.120.0 * 255.255.255.0 U 0 0 0 eth0
default 83.1.120.1 0.0.0.0 UG 0 0 0 eth0