Kamerka CNR-WCAM43 - jak uruchomi

[cesqad]

Witam.
Mam taką kamerkę: CNR-WCAM43. Kupiłem ją w realu. Zadziwiła mnie bardzo dobra jakość obrazu i nie żartuję. Naprawdę, kumple mają jakieś creativy i gorszy obraz.

Nie wiem jak ją zainstalować aby działała ze skypem pod Linuksem. Pod Windows nie było żadnych problemów z tym, a tutaj naprawdę nie wiem. Dlatego piszę z prośbą o pomoc.
Pozdrawiam.

[DadaD]

Witaj!

Tu masz przykładowo opisane, (mniej wiecej) jak zabierać się do instalacji kamerki.
Wszystkie kamerki instaluje się lub nie, bardzo podobnie.

pozdrowienia

[cesqad]

Niestety nie poradziłem sobie chyba kamerka nie będzie działać.

[DadaD]

Niestety nie poradziłem sobie chyba kamerka nie będzie działać.

W takim razie w czym jest problem?
Podaj co robiłeś, dokąd doszedłeś?

Będziemy szukać rozwiązania.

pozdrowienia

[cesqad]

Robiłem to co było napisane na stronie ale pewnie coś pomieszałem bo nie działa. Teraz nie wiem jak cofnąć wprowadzone zmiany? Zainstalowałem któryś z tych modułów nawet nie pamiętam bo nie wiedziałem, który do mojej kamerki. Jakby ktoś był tak miły i zechciał pomóc mi z tym.
Pozdrawiam

[DadaD]

WitaJ!
Na stronę wchodziłeś i sprawdzałeś?
Pewno nie.
Do instalacji kamerek jest dużo stron, ale potrzebne są następujące dane:
podłącz kamerkę i podaj

Kod: Zaznacz cały

# lsusb

następnie

Kod: Zaznacz cały

#dmesg  

następnie

Kod: Zaznacz cały

$ uname -r

oraz

Kod: Zaznacz cały

#aptitude search gspca*

To co robiłeś w konsoli można w prosty sposób prześledzić np naciskając strzałkę do góry co pokaże nam ostatnio wklepane polecenia ...

pozdrowienia

[cesqad]

Po wpisaniu:

Kod: Zaznacz cały

lsusb

wyszło:

Kod: Zaznacz cały

debian:/home/maciek# lsusb
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 0c45:612a Microdia PC Camera (SN9C325)
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Po wpisaniu

Kod: Zaznacz cały

dmesg

wyszło:

Kod: Zaznacz cały

debian:/home/maciek# dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-13) (waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 18:29:31 UTC 2009
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000afee0000 (usable)
[    0.000000]  BIOS-e820: 00000000afee0000 - 00000000afee3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000afee3000 - 00000000afef0000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000afef0000 - 00000000aff00000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000150000000 (usable)
[    0.000000] Warning only 4GB will be used.
[    0.000000] Use a HIGHMEM64G enabled kernel.
[    0.000000] 3200MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at [c00f55d0] 000f55d0
[    0.000000] Entering add_active_range(0, 0, 1048576) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->  1048576
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->  1048576
[    0.000000] On node 0 totalpages: 1048576
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 6400 pages used for memmap
[    0.000000]   HighMem zone: 812800 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI 2.4 present.
[    0.000000] ACPI: RSDP 000F6FC0, 0014 (r0 GBT   )
[    0.000000] ACPI: RSDT AFEE3000, 0038 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
[    0.000000] ACPI: FACP AFEE3040, 0074 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
[    0.000000] ACPI: DSDT AFEE30C0, 66F8 (r1 GBT    GBTUACPI     1000 MSFT  3000000)
[    0.000000] ACPI: FACS AFEE0000, 0040
[    0.000000] ACPI: SSDT AFEE9880, 0350 (r1 PTLTD  POWERNOW        1  LTP        1)
[    0.000000] ACPI: HPET AFEE9C00, 0038 (r1 GBT    GBTUACPI 42302E31 GBTU       98)
[    0.000000] ACPI: MCFG AFEE9C40, 003C (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
[    0.000000] ACPI: APIC AFEE97C0, 0084 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
[    0.000000] ATI board detected. Disabling timer routing over 8254.
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at b0000000 (gap: aff00000:30100000)
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PERCPU: Allocating 37960 bytes of per cpu data
[    0.000000] NR_CPUS: 8, nr_cpu_ids: 4
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1040384
[    0.000000] Kernel command line: root=/dev/hdj8 ro quiet
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 3214.736 MHz processor.
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [tty0] enabled
[    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.004000] Memory: 2838208k/4194304k available (1769k kernel code, 43100k reserved, 752k data, 244k init, 1964928k highmem)
[    0.004000] virtual kernel memory layout:
[    0.004000]     fixmap  : 0xfff4c000 - 0xfffff000   ( 716 kB)
[    0.004000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.004000]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[    0.004000]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[    0.004000]       .init : 0xc037f000 - 0xc03bc000   ( 244 kB)
[    0.004000]       .data : 0xc02ba4ab - 0xc0376620   ( 752 kB)
[    0.004000]       .text : 0xc0100000 - 0xc02ba4ab   (1769 kB)
[    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[    0.004000] hpet clockevent registered
[    0.084007] Calibrating delay using timer specific routine.. 6434.02 BogoMIPS (lpj=12868049)
[    0.084028] Security Framework initialized
[    0.084032] SELinux:  Disabled at boot.
[    0.084034] Capability LSM initialized
[    0.084044] Mount-cache hash table entries: 512
[    0.084129] Initializing cgroup subsys ns
[    0.084132] Initializing cgroup subsys cpuacct
[    0.084134] Initializing cgroup subsys devices
[    0.084145] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.084146] CPU: L2 Cache: 1024K (64 bytes/line)
[    0.084148] CPU 0(2) -> Core 0
[    0.084150] Intel machine check architecture supported.
[    0.084152] Intel machine check reporting enabled on CPU#0.
[    0.084158] Checking 'hlt' instruction... OK.
[    0.100644] ACPI: Core revision 20080321
[    0.112007] ENABLING IO-APIC IRQs
[    0.112007] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.151654] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6400+ stepping 03
[    0.152009] Booting processor 1/1 ip 6000
[    0.160010] Initializing CPU#1
[    0.160010] Calibrating delay using timer specific routine.. 6429.26 BogoMIPS (lpj=12858521)
[    0.160010] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.160010] CPU: L2 Cache: 1024K (64 bytes/line)
[    0.160010] CPU 1(2) -> Core 1
[    0.160010] Intel machine check architecture supported.
[    0.160010] Intel machine check reporting enabled on CPU#1.
[    0.239932] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 6400+ stepping 03
[    0.239946] Brought up 2 CPUs
[    0.239947] Total of 2 processors activated (12863.28 BogoMIPS).
[    0.239982] CPU0 attaching sched-domain:
[    0.239984]  domain 0: span 0-1
[    0.239985]   groups: 0 1
[    0.239988] CPU1 attaching sched-domain:
[    0.239989]  domain 0: span 0-1
[    0.239990]   groups: 1 0
[    0.240015] net_namespace: 660 bytes
[    0.240015] Booting paravirtualized kernel on bare hardware
[    0.240015] NET: Registered protocol family 16
[    0.240015] ACPI: bus type pci registered
[    0.240015] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.240015] PCI: MCFG area at e0000000 reserved in E820
[    0.240015] PCI: Using MMCONFIG for extended config space
[    0.240015] PCI: Using configuration type 1 for base access
[    0.240015] Setting up standard PCI resources
[    0.240015] ACPI: EC: Look up EC in DSDT
[    0.244015] ACPI: Interpreter enabled
[    0.244015] ACPI: (supports S0 S3 S4 S5)
[    0.244015] ACPI: Using IOAPIC for interrupt routing
[    0.248015] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.248015] pci 0000:00:12.0: set SATA to AHCI mode
[    0.249590] PCI: Transparent bridge - 0000:00:14.4
[    0.249612] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.249858] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[    0.249950] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[    0.250016] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
[    0.250079] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
[    0.250141] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
[    0.268016] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.268016] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.268016] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.268016] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.268016] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.268016] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.268016] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.268016] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[    0.268016] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.268016] pnp: PnP ACPI init
[    0.268016] ACPI: bus type pnp registered
[    0.268017] pnp 00:0d: mem resource (0xe0000000-0xefffffff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling
[    0.268017] pnp 00:0e: mem resource (0xffff0000-0xffffffff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling
[    0.268017] pnp 00:0e: mem resource (0xfec00000-0xfec00fff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling
[    0.268017] pnp 00:0e: mem resource (0xfee00000-0xfee00fff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling
[    0.268017] pnp 00:0e: mem resource (0xfff80000-0xfffeffff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling
[    0.268017] pnp: PnP ACPI: found 15 devices
[    0.268017] ACPI: ACPI bus type pnp unregistered
[    0.268017] PnPBIOS: Disabled by ACPI PNP
[    0.268017] PCI: Using ACPI for IRQ routing
[    0.268017] PCI: Cannot allocate resource region 3 of device 0000:00:00.0
[    0.268017] PCI: Cannot allocate resource region 5 of device 0000:00:12.0
[    0.272061] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.272064] hpet0: 4 32-bit timers, 14318180 Hz
[    0.273099] ACPI: RTC can wake from S4
[    0.276056] Switched to high resolution mode on CPU 0
[    0.276798] Switched to high resolution mode on CPU 1
[    0.280037] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[    0.280040] system 00:01: ioport range 0x220-0x225 has been reserved
[    0.280041] system 00:01: ioport range 0x290-0x294 has been reserved
[    0.280046] system 00:02: ioport range 0x4100-0x411f has been reserved
[    0.280048] system 00:02: ioport range 0x228-0x22f has been reserved
[    0.280049] system 00:02: ioport range 0x40b-0x40b has been reserved
[    0.280051] system 00:02: ioport range 0x4d6-0x4d6 has been reserved
[    0.280053] system 00:02: ioport range 0xc00-0xc01 has been reserved
[    0.280055] system 00:02: ioport range 0xc14-0xc14 has been reserved
[    0.280057] system 00:02: ioport range 0xc50-0xc52 has been reserved
[    0.280059] system 00:02: ioport range 0xc6c-0xc6d has been reserved
[    0.280061] system 00:02: ioport range 0xc6f-0xc6f has been reserved
[    0.280062] system 00:02: ioport range 0xcd0-0xcd1 has been reserved
[    0.280064] system 00:02: ioport range 0xcd2-0xcd3 has been reserved
[    0.280066] system 00:02: ioport range 0xcd4-0xcdf has been reserved
[    0.280068] system 00:02: ioport range 0x4000-0x40fe has been reserved
[    0.280070] system 00:02: ioport range 0x4210-0x4217 has been reserved
[    0.280072] system 00:02: ioport range 0xb00-0xb1f could not be reserved
[    0.280074] system 00:02: ioport range 0x238-0x23f has been reserved
[    0.280084] system 00:0e: iomem range 0xcf800-0xcffff has been reserved
[    0.280085] system 00:0e: iomem range 0xf0000-0xf7fff could not be reserved
[    0.280087] system 00:0e: iomem range 0xf8000-0xfbfff could not be reserved
[    0.280089] system 00:0e: iomem range 0xfc000-0xfffff could not be reserved
[    0.280091] system 00:0e: iomem range 0xafee0000-0xafefffff could not be reserved
[    0.280093] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[    0.280095] system 00:0e: iomem range 0x100000-0xafedffff could not be reserved
[    0.312004] PCI: Bridge: 0000:02:00.0
[    0.312004]   IO window: d000-dfff
[    0.312004]   MEM window: 0xfd800000-0xfd8fffff
[    0.312004]   PREFETCH window: 0x00000000c0000000-0x00000000cfffffff
[    0.312004] PCI: Bridge: 0000:02:0c.0
[    0.312004]   IO window: c000-cfff
[    0.312004]   MEM window: 0xfd700000-0xfd7fffff
[    0.312004]   PREFETCH window: 0x00000000b0000000-0x00000000bfffffff
[    0.312004] PCI: Bridge: 0000:01:00.0
[    0.312004]   IO window: c000-dfff
[    0.312004]   MEM window: 0xfd700000-0xfd8fffff
[    0.312004]   PREFETCH window: 0x00000000b0000000-0x00000000cfffffff
[    0.312004] PCI: Bridge: 0000:00:02.0
[    0.312004]   IO window: c000-dfff
[    0.312004]   MEM window: 0xfd700000-0xfd9fffff
[    0.312004]   PREFETCH window: 0x00000000b0000000-0x00000000cfffffff
[    0.312004] PCI: Bridge: 0000:00:07.0
[    0.312004]   IO window: b000-bfff
[    0.312004]   MEM window: 0xfdf00000-0xfdffffff
[    0.312004]   PREFETCH window: 0x00000000fde00000-0x00000000fdefffff
[    0.312004] PCI: Bridge: 0000:00:09.0
[    0.312004]   IO window: a000-afff
[    0.312004]   MEM window: 0xfdd00000-0xfddfffff
[    0.312004]   PREFETCH window: 0x00000000fdc00000-0x00000000fdcfffff
[    0.312004] PCI: Bridge: 0000:00:0a.0
[    0.312004]   IO window: e000-efff
[    0.312004]   MEM window: 0xfdb00000-0xfdbfffff
[    0.312004]   PREFETCH window: 0x00000000fda00000-0x00000000fdafffff
[    0.312004] PCI: Bridge: 0000:00:14.4
[    0.312004]   IO window: 9000-9fff
[    0.312004]   MEM window: 0xfd600000-0xfd6fffff
[    0.312004]   PREFETCH window: 0x00000000fd500000-0x00000000fd5fffff
[    0.312004] PCI: Setting latency timer of device 0000:00:02.0 to 64
[    0.312004] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[    0.312004] PCI: Setting latency timer of device 0000:01:00.0 to 64
[    0.312004] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[    0.312004] PCI: Setting latency timer of device 0000:02:00.0 to 64
[    0.312004] ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 18 (level, low) -> IRQ 18
[    0.312004] PCI: Setting latency timer of device 0000:02:0c.0 to 64
[    0.312004] PCI: Setting latency timer of device 0000:00:07.0 to 64
[    0.312004] PCI: Setting latency timer of device 0000:00:09.0 to 64
[    0.312004] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[    0.312004] NET: Registered protocol family 2
[    0.324058] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.324259] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.328005] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.328005] TCP: Hash tables configured (established 131072 bind 65536)
[    0.328005] TCP reno registered
[    0.332071] NET: Registered protocol family 1
[    0.332140] checking if image is initramfs... it is
[    0.624005] Freeing initrd memory: 6060k freed
[    0.625106] audit: initializing netlink socket (disabled)
[    0.625106] type=2000 audit(1236631202.624:1): initialized
[    0.625106] highmem bounce pool size: 64 pages
[    0.625106] Total HugeTLB memory allocated, 0
[    0.625125] VFS: Disk quotas dquot_6.5.1
[    0.625148] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.625177] msgmni has been set to 1718
[    0.629065] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.629065] io scheduler noop registered
[    0.629065] io scheduler anticipatory registered
[    0.629065] io scheduler deadline registered
[    0.629065] io scheduler cfq registered (default)
[    0.767730] pci 0000:04:00.0: Boot video device
[    0.768567] PCI: Setting latency timer of device 0000:00:02.0 to 64
[    0.768567] assign_interrupt_mode Found MSI capability
[    0.768567] Allocate Port Service[0000:00:02.:p cie00]
[    0.768567] PCI: Setting latency timer of device 0000:00:07.0 to 64
[    0.768567] assign_interrupt_mode Found MSI capability
[    0.768567] Allocate Port Service[0000:00:07.:p cie00]
[    0.768567] PCI: Setting latency timer of device 0000:00:09.0 to 64
[    0.768567] assign_interrupt_mode Found MSI capability
[    0.768567] Allocate Port Service[0000:00:09.:p cie00]
[    0.768567] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[    0.768567] assign_interrupt_mode Found MSI capability
[    0.768567] Allocate Port Service[0000:00:0a.:p cie00]
[    0.768567] PCI: Setting latency timer of device 0000:01:00.0 to 64
[    0.768567] assign_interrupt_mode Found MSI capability
[    0.768630] PCI: Setting latency timer of device 0000:02:00.0 to 64
[    0.768661] assign_interrupt_mode Found MSI capability
[    0.768725] PCI: Setting latency timer of device 0000:02:0c.0 to 64
[    0.768755] assign_interrupt_mode Found MSI capability
[    0.769066] isapnp: Scanning for PnP cards...
[    1.215209] isapnp: No Plug & Play device found
[    1.219204] hpet_resources: 0xfed00000 is busy
[    1.220242] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[    1.221050] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.221050] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.221051] brd: module loaded
[    1.221051] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.221051] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.221051] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.221051] mice: PS/2 mouse device common for all mice
[    1.221051] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.221051] rtc0: alarms up to one month
[    1.221051] cpuidle: using governor ladder
[    1.221051] cpuidle: using governor menu
[    1.221051] No iBFT detected.
[    1.221051] TCP cubic registered
[    1.221051] NET: Registered protocol family 17
[    1.221051] Using IPI No-Shortcut mode
[    1.221051] registered taskstats version 1
[    1.221051] rtc_cmos 00:05: setting system clock to 2009-03-09 20:40:04 UTC (1236631204)
[    1.221051] Freeing unused kernel memory: 244k freed
[    1.249373] input: AT Translated Set 2 keyboard as /class/input/input0
[    1.281372] ACPI: ACPI0007:00 is registered as cooling_device0
[    1.281372] ACPI: ACPI0007:01 is registered as cooling_device1
[    1.485373] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
[    1.485373] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 19 (level, low) -> IRQ 19
[    1.485373] PCI: Setting latency timer of device 0000:05:00.0 to 64
[    1.485373] eth0: RTL8168b/8111b at 0xf883e000, 00:1d:7d:05:6f:e5, XID 38000000 IRQ 216
[    1.505767] No dock devices found.
[    1.509769] SCSI subsystem initialized
[    1.525191] Uniform Multi-Platform E-IDE driver
[    1.525195] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[    1.531653] libata version 3.00 loaded.
[    1.532431] JMB: IDE controller (0x197b:0x2363 rev 0x02) at  PCI slot 0000:06:00.1
[    1.532444] JMicron IDE 0000:06:00.1: enabling device (0000 -> 0001)
[    1.532450] ACPI: PCI Interrupt 0000:06:00.1[B] -> GSI 18 (level, low) -> IRQ 18
[    1.532457] JMB: 100% native mode on irq 18
[    1.532469] PCI: Setting latency timer of device 0000:06:00.1 to 64
[    1.532473]     ide0: BM-DMA at 0xab00-0xab07
[    1.532481]     ide1: BM-DMA at 0xab08-0xab0f
[    1.532486] Probing IDE interface ide0...
[    1.545006] usbcore: registered new interface driver usbfs
[    1.545021] usbcore: registered new interface driver hub
[    1.545051] usbcore: registered new device driver usb
[    1.546082] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.646265] Floppy drive(s): fd0 is 1.44M
[    1.666264] FDC 0 is a post-1991 82077
[    2.098299] Probing IDE interface ide1...
[    2.670187] ide0 at 0xaf00-0xaf07,0xae02 on irq 18
[    2.670196] ide1 at 0xad00-0xad07,0xac02 on irq 18
[    2.670213] JMB: IDE controller (0x197b:0x2363 rev 0x02) at  PCI slot 0000:07:00.1
[    2.670226] JMicron IDE 0000:07:00.1: enabling device (0000 -> 0001)
[    2.670232] ACPI: PCI Interrupt 0000:07:00.1[B] -> GSI 19 (level, low) -> IRQ 19
[    2.670240] JMB: 100% native mode on irq 19
[    2.670251] PCI: Setting latency timer of device 0000:07:00.1 to 64
[    2.670255]     ide2: BM-DMA at 0xeb00-0xeb07
[    2.670263]     ide3: BM-DMA at 0xeb08-0xeb0f
[    2.670268] Probing IDE interface ide2...
[    3.238174] Probing IDE interface ide3...
[    3.936008] ide2 at 0xef00-0xef07,0xee02 on irq 19
[    3.936014] ide3 at 0xed00-0xed07,0xec02 on irq 19
[    3.939978] ahci 0000:00:12.0: version 3.0
[    3.939978] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22
[    3.939978] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[    5.399577] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    5.399579] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part 
[    5.403530] scsi0 : ahci
[    5.403530] scsi1 : ahci
[    5.403530] scsi2 : ahci
[    5.403530] scsi3 : ahci
[    5.403553] ata1: SATA max UDMA/133 abar m1024@0xd0000000 port 0xd0000100 irq 22
[    5.403556] ata2: SATA max UDMA/133 abar m1024@0xd0000000 port 0xd0000180 irq 22
[    5.403559] ata3: SATA max UDMA/133 abar m1024@0xd0000000 port 0xd0000200 irq 22
[    5.403562] ata4: SATA max UDMA/133 abar m1024@0xd0000000 port 0xd0000280 irq 22
[    5.915512] ata1: SATA link down (SStatus 0 SControl 300)
[    6.251533] ata2: SATA link down (SStatus 0 SControl 300)
[    6.655178] ata3: SATA link down (SStatus 0 SControl 300)
[    7.154664] ata4: softreset failed (device not ready)
[    7.154708] ata4: failed due to HW bug, retry pmp=0
[    7.318676] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    7.319548] ata4.00: ATAPI: TSSTcorp CDDVDW SH-S203B, SB00, max UDMA/100, ATAPI AN
[    7.319554] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[    7.320689] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[    7.320691] ata4.00: configured for UDMA/100
[    7.335316] scsi 3:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S203B  SB00 PQ: 0 ANSI: 5
[    7.338659] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 16
[    7.338659] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    7.338659] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[    7.338659] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02f000
[    7.579056] usb usb1: configuration #1 chosen from 1 choice
[    7.579073] hub 1-0:1.0: USB hub found
[    7.579082] hub 1-0:1.0: 2 ports detected
[    7.690689] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    7.690691] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.690693] usb usb1: Product: OHCI Host Controller
[    7.690694] usb usb1: Manufacturer: Linux 2.6.26-1-686 ohci_hcd
[    7.690695] usb usb1: SerialNumber: 0000:00:13.0
[    7.694627] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17
[    7.694627] ohci_hcd 0000:00:13.1: OHCI Host Controller
[    7.694627] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[    7.694627] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02e000
[    7.754629] usb usb2: configuration #1 chosen from 1 choice
[    7.754629] hub 2-0:1.0: USB hub found
[    7.754629] hub 2-0:1.0: 2 ports detected
[    7.854178] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    7.854180] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.854182] usb usb2: Product: OHCI Host Controller
[    7.854183] usb usb2: Manufacturer: Linux 2.6.26-1-686 ohci_hcd
[    7.854185] usb usb2: SerialNumber: 0000:00:13.1
[    7.858130] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18
[    7.858130] ohci_hcd 0000:00:13.2: OHCI Host Controller
[    7.858130] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[    7.858130] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02d000
[    7.918128] usb usb3: configuration #1 chosen from 1 choice
[    7.918143] hub 3-0:1.0: USB hub found
[    7.918150] hub 3-0:1.0: 2 ports detected
[    8.018161] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    8.018163] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.018164] usb usb3: Product: OHCI Host Controller
[    8.018166] usb usb3: Manufacturer: Linux 2.6.26-1-686 ohci_hcd
[    8.018167] usb usb3: SerialNumber: 0000:00:13.2
[    8.022111] ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17
[    8.022111] ohci_hcd 0000:00:13.3: OHCI Host Controller
[    8.022111] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4
[    8.022111] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02c000
[    8.082107] usb usb4: configuration #1 chosen from 1 choice
[    8.082123] hub 4-0:1.0: USB hub found
[    8.082130] hub 4-0:1.0: 2 ports detected
[    8.182147] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    8.182149] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.182151] usb usb4: Product: OHCI Host Controller
[    8.182152] usb usb4: Manufacturer: Linux 2.6.26-1-686 ohci_hcd
[    8.182153] usb usb4: SerialNumber: 0000:00:13.3
[    8.186095] ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 18
[    8.186095] ohci_hcd 0000:00:13.4: OHCI Host Controller
[    8.186095] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5
[    8.186095] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02b000
[    8.262215] usb usb5: configuration #1 chosen from 1 choice
[    8.262230] hub 5-0:1.0: USB hub found
[    8.262237] hub 5-0:1.0: 2 ports detected
[    8.362255] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    8.362257] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.362259] usb usb5: Product: OHCI Host Controller
[    8.362260] usb usb5: Manufacturer: Linux 2.6.26-1-686 ohci_hcd
[    8.362261] usb usb5: SerialNumber: 0000:00:13.4
[    8.362255] ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19
[    8.362255] ehci_hcd 0000:00:13.5: EHCI Host Controller
[    8.362255] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6
[    8.362255] ehci_hcd 0000:00:13.5: debug port 1
[    8.362255] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe02a000
[    8.378250] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    8.378250] usb usb6: configuration #1 chosen from 1 choice
[    8.378250] hub 6-0:1.0: USB hub found
[    8.378250] hub 6-0:1.0: 10 ports detected
[    8.481640] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[    8.481640] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.481640] usb usb6: Product: EHCI Host Controller
[    8.481640] usb usb6: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
[    8.481640] usb usb6: SerialNumber: 0000:00:13.5
[    8.481640] SB600_PATA: IDE controller (0x1002:0x438c rev 0x00) at  PCI slot 0000:00:14.1
[    8.481640] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
[    8.481640] SB600_PATA: 100% native mode on irq 16
[    8.481640]     ide4: BM-DMA at 0xf900-0xf907
[    8.481640] Probing IDE interface ide4...
[    9.073248] hdj: SAMSUNG SV4003H, ATA DISK drive
[    9.277686] hdj: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[    9.277773] hdj: UDMA/100 mode selected
[    9.277870] ide4 at 0xfd00-0xfd07,0xfc02 on irq 16
[    9.277773] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[   10.394133] ahci 0000:06:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[   10.394136] ahci 0000:06:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[   10.394140] PCI: Setting latency timer of device 0000:06:00.0 to 64
[   10.398104] scsi4 : ahci
[   10.398104] scsi5 : ahci
[   10.398104] ata5: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe100 irq 17
[   10.398104] ata6: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe180 irq 17
[   10.714585] ata5: SATA link down (SStatus 0 SControl 300)
[   11.174615] ata6: SATA link down (SStatus 0 SControl 300)
[   11.426589] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[   12.870732] ahci 0000:07:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[   12.870734] ahci 0000:07:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[   12.870738] PCI: Setting latency timer of device 0000:07:00.0 to 64
[   12.874704] scsi6 : ahci
[   12.874704] scsi7 : ahci
[   12.874704] ata7: SATA max UDMA/133 abar m8192@0xfdbfe000 port 0xfdbfe100 irq 18
[   12.874704] ata8: SATA max UDMA/133 abar m8192@0xfdbfe000 port 0xfdbfe180 irq 18
[   13.193193] ata7: SATA link down (SStatus 0 SControl 300)
[   13.530724] ata8: SATA link down (SStatus 0 SControl 300)
[   13.711199] ACPI: PCI Interrupt 0000:08:0e.0[A] -> GSI 22 (level, low) -> IRQ 22
[   13.760808] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]  MMIO=[fd6ff000-fd6ff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[   13.787200] Driver 'sr' needs updating - please use bus_type methods
[   13.788906] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[   13.788910] Uniform CD-ROM driver Revision: 3.20
[   13.788961] sr 3:0:0:0: Attached scsi CD-ROM sr0
[   13.807597] hdj: max request size: 128KiB
[   13.807597] hdj: Host Protected Area detected.
[   13.807597] 	current capacity is 78240077 sectors (40058 MB)
[   13.807597] 	native  capacity is 78242190 sectors (40060 MB)
[   13.807597] hdj: Host Protected Area disabled.
[   13.807597] hdj: 78242190 sectors (40060 MB) w/468KiB Cache, CHS=65535/16/63
[   13.807597] hdj: cache flushes supported
[   13.807597]  hdj: hdj1 < hdj5 hdj6<5>sr 3:0:0:0: Attached scsi generic sg0 type 5
[   13.827598]  hdj7 hdj8 >
[   14.481745] PM: Starting manual resume from disk
[   14.513980] EXT3-fs: INFO: recovery required on readonly filesystem.
[   14.513980] EXT3-fs: write access will be enabled during recovery.
[   15.042312] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[000e150500001d7d]
[   22.373140] kjournald starting.  Commit interval 5 seconds
[   22.373140] EXT3-fs: recovery complete.
[   22.373140] EXT3-fs: mounted filesystem with ordered data mode.
[   24.673582] udevd version 125 started
[   25.081169] Linux agpgart interface v0.103
[   25.171335] input: Power Button (FF) as /class/input/input1
[   25.223394] ACPI: Power Button (FF) [PWRF]
[   25.223442] input: Power Button (CM) as /class/input/input2
[   25.287413] ACPI: Power Button (CM) [PWRB]
[   25.294853] ACPI: WMI: Mapper loaded
[   25.461007] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[   25.719252] input: PC Speaker as /class/input/input3
[   26.373476] input: ImPS/2 Generic Wheel Mouse as /class/input/input4
[   26.387645] parport_pc 00:0a: reported by Plug and Play ACPI
[   26.387711] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[   26.472682] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
[   26.501323] hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
[   26.534646] ACPI: PCI Interrupt 0000:04:00.1[B] -> GSI 19 (level, low) -> IRQ 19
[   26.534666] PCI: Setting latency timer of device 0000:04:00.1 to 64
[   27.765997] Adding 1951888k swap on /dev/hdj5.  Priority:-1 extents:1 across:1951888k
[   28.131860] EXT3 FS on hdj8, internal journal
[   28.315926] loop: module loaded
[   31.130062] kjournald starting.  Commit interval 5 seconds
[   31.131811] EXT3 FS on hdj6, internal journal
[   31.131811] EXT3-fs: mounted filesystem with ordered data mode.
[   31.174658] kjournald starting.  Commit interval 5 seconds
[   31.185719] EXT3 FS on hdj7, internal journal
[   31.185719] EXT3-fs: mounted filesystem with ordered data mode.
[   32.471518] NET: Registered protocol family 10
[   32.471518] lo: Disabled Privacy Extensions
[   32.513527] r8169: eth0: link up
[   32.513797] r8169: eth0: link up
[   33.845663] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6400+ processors (2 cpu cores) (version 2.20.00)
[   33.852469] powernow-k8:    0 : fid 0x18 (3200 MHz), vid 0x8
[   33.852469] powernow-k8:    1 : fid 0x16 (3000 MHz), vid 0xa
[   33.852469] powernow-k8:    2 : fid 0x14 (2800 MHz), vid 0xc
[   33.852469] powernow-k8:    3 : fid 0x12 (2600 MHz), vid 0xe
[   33.852469] powernow-k8:    4 : fid 0x10 (2400 MHz), vid 0x10
[   33.852469] powernow-k8:    5 : fid 0xe (2200 MHz), vid 0x10
[   33.852469] powernow-k8:    6 : fid 0xc (2000 MHz), vid 0x10
[   33.852469] powernow-k8:    7 : fid 0xa (1800 MHz), vid 0x10
[   33.852469] powernow-k8:    8 : fid 0x2 (1000 MHz), vid 0x12
[   39.565706] lp0: using parport0 (interrupt-driven).
[   39.584926] ppdev: user-space parallel port driver
[   40.592851] Clocksource tsc unstable (delta = -214237229 ns)
[   43.965230] eth0: no IPv6 routers present
[   47.082813] RPC: Registered udp transport module.
[   47.082817] RPC: Registered tcp transport module.
[   47.138143] Installing knfsd (copyright (C) 1996 [email]okir@monad.swb.de[/email]).
[   47.207942] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   47.217254] NFSD: starting 90-second grace period
[   51.602612] Bluetooth: Core ver 2.11
[   51.602847] NET: Registered protocol family 31
[   51.602851] Bluetooth: HCI device and connection manager initialized
[   51.602853] Bluetooth: HCI socket layer initialized
[   51.738771] Bluetooth: L2CAP ver 2.9
[   51.738774] Bluetooth: L2CAP socket layer initialized
[   52.090166] Bluetooth: RFCOMM socket layer initialized
[   52.090174] Bluetooth: RFCOMM TTY layer initialized
[   52.090176] Bluetooth: RFCOMM ver 1.8
[   54.037445] NET: Registered protocol family 5
[   71.426837] eth0: no IPv6 routers present
[  389.362504] hda-intel: Invalid position buffer, using LPIB read method instead.
[ 3466.424504] usb 5-2: new full speed USB device using ohci_hcd and address 2
[ 3466.589608] usb 5-2: configuration #1 chosen from 1 choice
[ 3466.589608] usb 5-2: New USB device found, idVendor=0c45, idProduct=612a
[ 3466.589608] usb 5-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3466.589608] usb 5-2: Product: USB camera
debian:/home/maciek# 

po wpisaniu

Kod: Zaznacz cały

$ uname -r

wyszło

Kod: Zaznacz cały

debian:/home/maciek# uname -r
2.6.26-1-686

po wpisaniu

Kod: Zaznacz cały

aptitude search gspca

wyszło

Kod: Zaznacz cały

debian:/home/maciek# aptitude search gspca
v   gspca-modules                   -                                           
p   gspca-modules-2.6-486           - Driver for webcams and digicams based on s
p   gspca-modules-2.6-686           - Driver for webcams and digicams based on s
p   gspca-modules-2.6-686-bigmem    - Driver for webcams and digicams based on s
p   gspca-modules-2.6-amd64         - Driver for webcams and digicams based on s
p   gspca-modules-2.6-openvz-686    - Driver for webcams and digicams based on s
p   gspca-modules-2.6-vserver-686   - Driver for webcams and digicams based on s
p   gspca-modules-2.6-vserver-686-b - Driver for webcams and digicams based on s
i   gspca-modules-2.6.26-1-486      - Driver for webcams and digicams based on s
p   gspca-modules-2.6.26-1-686      - Driver for webcams and digicams based on s
p   gspca-modules-2.6.26-1-686-bigm - Driver for webcams and digicams based on s
p   gspca-modules-2.6.26-1-amd64    - Driver for webcams and digicams based on s
p   gspca-modules-2.6.26-1-openvz-6 - Driver for webcams and digicams based on s
p   gspca-modules-2.6.26-1-vserver- - Driver for webcams and digicams based on s
p   gspca-modules-2.6.26-1-vserver- - Driver for webcams and digicams based on s
i   gspca-source                    - source for the gspca v4l kernel module    
debian:/home/maciek#

Bardzo proszę powiedzcie co mam teraz po kolei zrobić bo dla mnie to jest chińszczyzna. Dopiero zaczynam przygodę z Debianem, zainstalowałem jakoś skypa, kadu, sterowniki Ati ale z tym nie potrafię. Na tamtą stronę wchodziłem ale przyznam się, że nie wiem o co tam chodzi. Bardzo proszę o pomoc.
Pozdrawiam.

[tydell]

Powinna według mnie zadziałać na sterowniku gspca,
Tak więc najpierw go załaduj poleceniem

Kod: Zaznacz cały

modprobe gspca

(lub gspcav, nie pamiętam dokładnie).

Sprawdź obraz z kamerki w mplayerze. Najpierw:

Kod: Zaznacz cały

LD_PRELOAD=/usr/lib/libv4l/v4l2convert.so mplayer tv:// -tv driver=v4l2:device=/dev/video0:brightness=50:gain=0 -fps 30

Potem spróbuj skypa uruchomić w konsoli poleceniem:

Kod: Zaznacz cały

LD_PRELOAD=/usr/lib/libv4l/v4l2convert.so skype

[DadaD]

Jak z poniższego widać

i gspca-modules-2.6.26-1-486 - Driver for webcams and digicams based on s

p gspca-modules-2.6.26-1-686 - Driver for webcams and digicams based o

zainstalowałeś nie ten moduł co ptrzeba bo Twój OS to wersja

uname -r
2.6.26-1-686

odinstaluj niepotrzebny gspca-modules-2.6.26-1-486 a w jego miejsce zainstaluj prawidłowy
gspca-modules-2.6.26-1-686
Polecenia które wykonałeś

lsusb
i
dmesg

podały ID Vendor oraz ID Product

Bus 005 Device 002: ID 0c45:612a Microdia PC Camera (SN9C325)
[ 3466.589608] usb 5-2: New USB device found, idVendor=0c45, idProduct=612a

Na ich podstawie sprawdzamy na stronie

mxhaard
czy nasza kamerka jest obsługiwana

Niestety nie widać.

No to dalej szukamy poprzez szukajkę - pytanie "Bus 005 Device 002: ID 0c45:612a Microdia PC Camera (SN9C325) "
i na poniższych stronach znajdujemy, że pewno nam się uda
pierwsza
druga
Instalujemy programik

cheese

i ewentualnie

camstream

Na wszelki wypadek wyłączmy komputer podłączamy kamerkę do złącza usb i uruchamiamy ponownie

uruchamiamy program do obsługi kamerki np najpierw cheese i sprawdzamy czy działa.
Nastepnie sprawdzamy camstream

Powinno działać

pozdrowienia

[cesqad]

Przepraszam może to głupie pytanie ale nie wiem, jak odinstalować moduł 2.6.26-1-486 a w jego miejsce zainstalować 2.6.26-1-686 ? teraz jestem w pracy ale jak wrócę do domu to na pewno spróbuję sobie z tym poradzić i podzielę się z wami informacją czy mi się udało :
Pozdrawiam