Kod: Zaznacz cały
./Configure
make
(Nie pamiętam czy wpisywałem make install)Kod: Zaznacz cały
apt-get install apache2Kod: Zaznacz cały
make: *** No rule to make target `uninstall'. Stop.Kod: Zaznacz cały
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
#
# [url]http://www.apache.org/licenses/LICENSE-2.0[/url]
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
##
## Makefile -- Apache Autoconf-style Interface (APACI)
## top-level control Makefile for out-of-the-box
## build and installation procedure.
##
## Written by Ralf S. Engelschall <rse@apache.org>
##
## ======================
## Options
## ======================
# safe environment
SHELL = @SHELL@
# what platform are we on
PLATFORM = @PLATFORM@
# paths to the source tree parts
TOP = .
SRC = @SRC@
MKF = @MKF@
AUX = @AUX@
# build tools
CP = cp
LN = ln
RM = rm -f
MKDIR = $(TOP)/$(AUX)/mkdir.sh
INSTALL = $(TOP)/$(AUX)/install.sh -c
IFLAGS_PROGRAM = @IFLAGS_PROGRAM@
IFLAGS_CORE = @IFLAGS_CORE@
IFLAGS_DSO = @IFLAGS_DSO@
IFLAGS_SCRIPT = @IFLAGS_SCRIPT@
IFLAGS_DATA = @IFLAGS_DATA@
INSTALL_PROGRAM = $(INSTALL) $(IFLAGS_PROGRAM)
INSTALL_CORE = $(INSTALL) $(IFLAGS_CORE)
INSTALL_DSO = $(INSTALL) $(IFLAGS_DSO)
INSTALL_SCRIPT = $(INSTALL) $(IFLAGS_SCRIPT)
INSTALL_DATA = $(INSTALL) $(IFLAGS_DATA)
PERL = @PERL@
TAR = @TAR@
TAROPT = @TAROPT@
# installation name of Apache webserver
TARGET = @TARGET@
# installation root
# (overrideable by package maintainers for
# rolling packages without bristling the system)
root =
# installation paths
prefix = @prefix@
exec_prefix = @exec_prefix@
bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
mandir = @mandir@
sysconfdir = @sysconfdir@
datadir = @datadir@
iconsdir = @iconsdir@
htdocsdir = @htdocsdir@
manualdir = @manualdir@
cgidir = @cgidir@
includedir = @includedir@
localstatedir = @localstatedir@
runtimedir = @runtimedir@
logfiledir = @logfiledir@
proxycachedir = @proxycachedir@
libexecdir_relative = @libexecdir_relative@
# suexec details (optional)
suexec = @suexec@
suexec_caller = @suexec_caller@
suexec_docroot = @suexec_docroot@
suexec_logexec = @suexec_logexec@
suexec_userdir = @suexec_userdir@
suexec_uidmin = @suexec_uidmin@
suexec_gidmin = @suexec_gidmin@
suexec_safepath = @suexec_safepath@
suexec_umask = @suexec_umask@
# some substituted configuration parameters
conf_user = @conf_user@
conf_group = @conf_group@
conf_port = @conf_port@
conf_serveradmin = @conf_serveradmin@
conf_servername = @conf_servername@
# usage of src/support stuff
build-support = @build_support@
install-support = @install_support@
clean-support = @clean_support@
distclean-support = @distclean_support@
# forwarding arguments
MFWD = root=$(root)
## ======================
## Targets
## ======================
# default target
all: build
## -------------------------------------------
## Build Target
## -------------------------------------------
# build the package
build:
@echo "===> $(SRC)"
@$(MAKE) -f $(TOP)/$(MKF) $(MFLAGS) $(MFWD) build-std
@if [ "x$(build-support)" != "x" ]; then \
$(MAKE) -f $(TOP)/$(MKF) $(MFLAGS) $(MFWD) $(build-support); \
fi
@touch $(TOP)/$(SRC)/.apaci.build.ok
@echo "<=== $(SRC)"
# the non-verbose variant for package maintainers
build-quiet:
@$(MAKE) -f $(TOP)/$(MKF) $(MFLAGS) $(MFWD) QUIET=1 build
# build the standard stuff
build-std:
@case "x$(PLATFORM)" in \
x*390*) _C89_STEPS="0xffffffff"; export _C89_STEPS;; \
esac; \
cd $(TOP)/$(SRC); $(MAKE) $(MFLAGS) SDP=$(SRC)/ all
# build the additional support stuff
build-support:
@echo "===> $(SRC)/support"; \
case "x$(PLATFORM)" in \
x*390*) _C89_STEPS="0xffffffff"; export _C89_STEPS;; \
esac; \
cd $(TOP)/$(SRC)/support; $(MAKE) $(MFLAGS) all || exit 1; \
if [ ".$(suexec)" = .1 ]; then \
$(MAKE) $(MFLAGS) \
EXTRA_CFLAGS='\
$(suexec_umask) \
-DHTTPD_USER=\"$(suexec_caller)\" \
-DUID_MIN=$(suexec_uidmin) \
-DGID_MIN=$(suexec_gidmin) \
-DUSERDIR_SUFFIX=\"$(suexec_userdir)\" \
-DLOG_EXEC=\"$(suexec_logexec)\" \
-DDOC_ROOT=\"$(suexec_docroot)\" \
-DSAFE_PATH=\"$(suexec_safepath)\"' \
suexec; \
fi
@echo "<=== $(SRC)/support"
## --------------------------------------------------------
## Installation Targets
## --------------------------------------------------------
# indirection step to avoid conflict with INSTALL document
# on case-insenstive filesystems, for instance on OS/2
install: install-all
# the install target for installing the complete Apache
# package. This is implemented by running subtargets for the
# separate parts of the installation process.
install-all:
@if [ ! -f $(TOP)/$(SRC)/.apaci.build.ok ]; then \
$(MAKE) -f $(TOP)/$(MKF) $(MFLAGS) $(MFWD) build; \
else \
:; \
fi
@$(MAKE) -f $(TOP)/$(MKF) $(MFLAGS) $(MFWD) \
install-mktree install-programs $(install-support) \
install-include install-data install-config
-@$(RM) $(SRC)/.apaci.install.tmp
-@$(RM) $(SRC)/.apaci.install.conf
-@if [ ".$(QUIET)" != .1 ]; then \
if [ ".$(TARGET)" = .httpd ]; then \
apachectl='apachectl'; \
else \
apachectl="$(TARGET)ctl"; \
fi; \
echo "+--------------------------------------------------------+"; \
echo "| You now have successfully built and installed the |"; \
echo "| Apache 1.3 HTTP server. To verify that Apache actually |"; \
echo "| works correctly you now should first check the |"; \
echo "| (initially created or preserved) configuration files |"; \
echo "| |"; \
echo "| $(sysconfdir)/$(TARGET).conf"; \
echo "| |"; \
echo "| and then you should be able to immediately fire up |"; \
echo "| Apache the first time by running: |"; \
echo "| |"; \
echo "| $(sbindir)/$${apachectl} start"; \
echo "| |"; \
echo "| Thanks for using Apache. The Apache Group |"; \
echo "| [url]http://www.apache.org/[/url] |"; \
echo "+--------------------------------------------------------+"; \
fi
# the non-verbose variant for package maintainers
install-quiet:
@$(MAKE) -f $(TOP)/$(MKF) $(MFLAGS) $(MFWD) QUIET=1 install-all
# create the installation tree
install-mktree:
@echo "===> [mktree: Creating Apache installation tree]"
$(MKDIR) $(root)$(bindir)
$(MKDIR) $(root)$(sbindir)
$(MKDIR) $(root)$(libexecdir)
$(MKDIR) $(root)$(mandir)/man1
$(MKDIR) $(root)$(mandir)/man8
$(MKDIR) $(root)$(sysconfdir)
$(MKDIR) $(root)$(htdocsdir)
$(MKDIR) $(root)$(manualdir)
$(MKDIR) $(root)$(iconsdir)
$(MKDIR) $(root)$(cgidir)
$(MKDIR) $(root)$(includedir)
$(MKDIR) $(root)$(includedir)/xml
$(MKDIR) $(root)$(runtimedir)
$(MKDIR) $(root)$(logfiledir)
$(MKDIR) $(root)$(proxycachedir)
-@if [ "x`$(AUX)/getuid.sh`" = "x0" ]; then \
echo "chown $(conf_user) $(root)$(proxycachedir)"; \
chown $(conf_user) $(root)$(proxycachedir); \
echo "chgrp $(conf_group) $(root)$(proxycachedir)"; \
chgrp "$(conf_group)" $(root)$(proxycachedir); \
fi
@echo "<=== [mktree]"
# install the server program and optionally corresponding
# shared object files.
install-programs:
@echo "===> [programs: Installing Apache $(TARGET) program and shared objects]"
-@if [ ".`grep '^[ ]*AddModule.*mod_so\.o' $(TOP)/$(SRC)/Configuration.apaci`" != . ]; then \
echo "$(INSTALL_CORE) $(TOP)/$(SRC)/$(TARGET) $(root)$(sbindir)/$(TARGET)"; \
$(INSTALL_CORE) $(TOP)/$(SRC)/$(TARGET) $(root)$(sbindir)/$(TARGET); \
SHLIB_EXPORT_FILES="`grep '^SHLIB_EXPORT_FILES=' $(TOP)/$(SRC)/Makefile | sed -e 's:^.*=::'`"; \
if [ ".$${SHLIB_EXPORT_FILES}" != . ]; then \
$(CP) $(TOP)/$(SRC)/support/httpd.exp $(root)$(libexecdir)/; \
chmod 644 $(root)$(libexecdir)/httpd.exp; \
fi; \
else \
echo "$(INSTALL_PROGRAM) $(TOP)/$(SRC)/$(TARGET) $(root)$(sbindir)/$(TARGET)"; \
$(INSTALL_PROGRAM) $(TOP)/$(SRC)/$(TARGET) $(root)$(sbindir)/$(TARGET); \
fi
-@if [ ".`grep 'SUBTARGET=target_shared' $(TOP)/$(SRC)/Makefile`" != . ]; then \
SHLIB_SUFFIX_NAME="`grep '^SHLIB_SUFFIX_NAME=' $(TOP)/$(SRC)/Makefile | sed -e 's:^.*=::'`"; \
SHLIB_SUFFIX_LIST="`grep '^SHLIB_SUFFIX_LIST=' $(TOP)/$(SRC)/Makefile | sed -e 's:^.*=::'`"; \
echo "$(INSTALL_CORE) $(TOP)/$(SRC)/lib$(TARGET).ep $(root)$(libexecdir)/lib$(TARGET).ep"; \
$(INSTALL_CORE) $(TOP)/$(SRC)/lib$(TARGET).ep $(root)$(libexecdir)/lib$(TARGET).ep; \
echo "$(INSTALL_DSO) $(TOP)/$(SRC)/lib$(TARGET).$${SHLIB_SUFFIX_NAME} $(root)$(libexecdir)/lib$(TARGET).$${SHLIB_SUFFIX_NAME}"; \
$(INSTALL_DSO) $(TOP)/$(SRC)/lib$(TARGET).$${SHLIB_SUFFIX_NAME} $(root)$(libexecdir)/lib$(TARGET).$${SHLIB_SUFFIX_NAME}; \
if [ ".$${SHLIB_SUFFIX_LIST}" != . ]; then \
echo "$(RM) $(libexecdir)/lib$(TARGET).$${SHLIB_SUFFIX_NAME}.*"; \
$(RM) $(libexecdir)/lib$(TARGET).$${SHLIB_SUFFIX_NAME}.*; \
for suffix in $${SHLIB_SUFFIX_LIST} ""; do \
[ ".$${suffix}" = . ] && continue; \
echo "$(LN) $(root)$(libexecdir)/lib$(TARGET).$${SHLIB_SUFFIX_NAME} $(root)$(libexecdir)/lib$(TARGET).$${SHLIB_SUFFIX_NAME}.$${suffix}"; \
$(LN) $(root)$(libexecdir)/lib$(TARGET).$${SHLIB_SUFFIX_NAME} $(root)$(libexecdir)/lib$(TARGET).$${SHLIB_SUFFIX_NAME}.$${suffix}; \
done; \
fi; \
fi
$(INSTALL_DATA) $(TOP)/$(SRC)/support/httpd.8 $(root)$(mandir)/man8/$(TARGET).8
-@$(RM) $(SRC)/.apaci.install.conf; touch $(SRC)/.apaci.install.conf
-@if [ ".`grep '^[ ]*SharedModule' $(TOP)/$(SRC)/Configuration.apaci`" != . ]; then \
for mod in `egrep '^[ ]*SharedModule' $(TOP)/$(SRC)/Configuration.apaci |\
sed -e 's/^[ ]*SharedModule[ ]*//'`; do \
file=`echo $${mod} | sed -e 's;^.*/\([^/]*\);\1;'`; \
echo "$(INSTALL_DSO) $(TOP)/$(SRC)/$${mod} $(root)$(libexecdir)/$${file}"; \
$(INSTALL_DSO) $(TOP)/$(SRC)/$${mod} $(root)$(libexecdir)/$${file}; \
name=`$(TOP)/$(AUX)/fmn.sh $(TOP)/$(SRC)/$${mod}`; \
echo dummy | awk '{ printf("LoadModule %-18s %s\n", modname, modpath); }' \
modname="$${name}" modpath="$(libexecdir_relative)$${file}" >>$(SRC)/.apaci.install.conf; \
done; \
echo "" >>$(SRC)/.apaci.install.conf; \
echo "# Reconstruction of the complete module list from all available modules" >>$(SRC)/.apaci.install.conf; \
echo "# (static and shared ones) to achieve correct module execution order." >>$(SRC)/.apaci.install.conf; \
echo "# [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]" >>$(SRC)/.apaci.install.conf; \
echo "ClearModuleList" >>$(SRC)/.apaci.install.conf; \
egrep "^[ ]*(Add|Shared)Module" $(SRC)/Configuration.apaci |\
sed -e 's:SharedModule:AddModule:' \
-e 's:modules/[^/]*/::' \
-e 's:[ ]lib: mod_:' \
-e 's:\.[dsoam].*$$:.c:' >>$(SRC)/.apaci.install.conf; \
fi
@echo "<=== [programs]"
# install the support programs and scripts
install-support:
@echo "===> [support: Installing Apache support programs and scripts]"
$(INSTALL_PROGRAM) $(TOP)/$(SRC)/support/ab $(root)$(sbindir)/ab
$(INSTALL_DATA) $(TOP)/$(SRC)/support/ab.8 $(root)$(mandir)/man8/ab.8
@if [ ".$(TARGET)" = .httpd ]; then \
apachectl='apachectl'; \
else \
apachectl="$(TARGET)ctl"; \
fi; \
echo "$(INSTALL_SCRIPT) $(TOP)/$(SRC)/support/apachectl[*] $(root)$(sbindir)/$${apachectl}"; \
sed -e 's;PIDFILE=.*;PIDFILE=$(runtimedir)/$(TARGET).pid;' \
-e 's;HTTPD=.*;HTTPD=$(sbindir)/$(TARGET);' \
< $(TOP)/$(SRC)/support/apachectl > $(TOP)/$(SRC)/.apaci.install.tmp && \
$(INSTALL_SCRIPT) $(TOP)/$(SRC)/.apaci.install.tmp $(root)$(sbindir)/$${apachectl}; \
echo "$(INSTALL_DATA) $(TOP)/$(SRC)/support/apachectl.8 $(root)$(mandir)/man8/$${apachectl}.8"; \
$(INSTALL_DATA) $(TOP)/$(SRC)/support/apachectl.8 $(root)$(mandir)/man8/$${apachectl}.8
$(INSTALL_PROGRAM) $(TOP)/$(SRC)/support/checkgid $(root)$(bindir)/checkgid
$(INSTALL_PROGRAM) $(TOP)/$(SRC)/support/htpasswd $(root)$(bindir)/htpasswd
$(INSTALL_DATA) $(TOP)/$(SRC)/support/htpasswd.1 $(root)$(mandir)/man1/htpasswd.1
$(INSTALL_PROGRAM) $(TOP)/$(SRC)/support/htdigest $(root)$(bindir)/htdigest
$(INSTALL_DATA) $(TOP)/$(SRC)/support/htdigest.1 $(root)$(mandir)/man1/htdigest.1
@echo "$(INSTALL_SCRIPT) $(TOP)/$(SRC)/support/dbmmanage[*] $(root)$(bindir)/dbmmanage"; \
sed -e 's;^#!/.*;#!$(PERL);' \
< $(TOP)/$(SRC)/support/dbmmanage > $(TOP)/$(SRC)/.apaci.install.tmp && \
$(INSTALL_SCRIPT) $(TOP)/$(SRC)/.apaci.install.tmp $(root)$(bindir)/dbmmanage
$(INSTALL_DATA) $(TOP)/$(SRC)/support/dbmmanage.1 $(root)$(mandir)/man1/dbmmanage.1
$(INSTALL_PROGRAM) $(TOP)/$(SRC)/support/logresolve $(root)$(sbindir)/logresolve
$(INSTALL_DATA) $(TOP)/$(SRC)/support/logresolve.8 $(root)$(mandir)/man8/logresolve.8
$(INSTALL_PROGRAM) $(TOP)/$(SRC)/support/rotatelogs $(root)$(sbindir)/rotatelogs
$(INSTALL_DATA) $(TOP)/$(SRC)/support/rotatelogs.8 $(root)$(mandir)/man8/rotatelogs.8
@echo "$(INSTALL_SCRIPT) $(TOP)/$(SRC)/support/apxs[*] $(root)$(sbindir)/apxs"; \
sed -e 's;^#!/.*;#!$(PERL);' \
-e 's;\@prefix\@;$(prefix);' \
-e 's;\@sbindir\@;$(sbindir);' \
-e 's;\@libexecdir\@;$(libexecdir);' \
-e 's;\@includedir\@;$(includedir);' \
-e 's;\@sysconfdir\@;$(sysconfdir);' \
< $(TOP)/$(SRC)/support/apxs > $(TOP)/$(SRC)/.apaci.install.tmp && \
$(INSTALL_SCRIPT) $(TOP)/$(SRC)/.apaci.install.tmp $(root)$(sbindir)/apxs
$(INSTALL_DATA) $(TOP)/$(SRC)/support/apxs.8 $(root)$(mandir)/man8/apxs.8
-@if [ ".$(suexec)" = .1 ]; then \
echo "$(INSTALL_PROGRAM) $(TOP)/$(SRC)/support/suexec $(root)$(sbindir)/suexec"; \
$(INSTALL_PROGRAM) $(TOP)/$(SRC)/support/suexec $(root)$(sbindir)/suexec; \
echo "chown root $(root)$(sbindir)/suexec"; \
chown root $(root)$(sbindir)/suexec; \
echo "chmod 4711 $(root)$(sbindir)/suexec"; \
chmod 4711 $(root)$(sbindir)/suexec; \
echo "$(INSTALL_DATA) $(TOP)/$(SRC)/support/suexec.8 $(root)$(mandir)/man8/suexec.8"; \
$(INSTALL_DATA) $(TOP)/$(SRC)/support/suexec.8 $(root)$(mandir)/man8/suexec.8; \
fi
@echo "<=== [support]"
# install the support programs and scripts for binary distribution
install-binsupport:
@echo "===> [support: Installing Apache support programs and scripts for binary distribution]"
$(INSTALL_PROGRAM) $(TOP)/$(SRC)/support/ab $(root)$(sbindir)/ab
$(INSTALL_DATA) $(TOP)/$(SRC)/support/ab.8 $(root)$(mandir)/man8/ab.8
@if [ ".$(TARGET)" = .httpd ]; then \
apachectl='apachectl'; \
else \
apachectl="$(TARGET)ctl"; \
fi; \
echo "$(INSTALL_SCRIPT) $(TOP)/$(SRC)/support/apachectl[*] $(root)$(sbindir)/$${apachectl}"; \
sed -e 's;PIDFILE=.*;PIDFILE=$(runtimedir)/$(TARGET).pid;' \
-e 's;HTTPD=.*;HTTPD=$(sbindir)/$(TARGET);' \
< $(TOP)/$(SRC)/support/apachectl > $(TOP)/$(SRC)/.apaci.install.tmp && \
$(INSTALL_SCRIPT) $(TOP)/$(SRC)/.apaci.install.tmp $(root)$(sbindir)/$${apachectl}; \
echo "$(INSTALL_DATA) $(TOP)/$(SRC)/support/apachectl.8 $(root)$(mandir)/man8/$${apachectl}.8"; \
$(INSTALL_DATA) $(TOP)/$(SRC)/support/apachectl.8 $(root)$(mandir)/man8/$${apachectl}.8
$(INSTALL_PROGRAM) $(TOP)/$(SRC)/support/checkgid $(root)$(bindir)/checkgid
$(INSTALL_PROGRAM) $(TOP)/$(SRC)/support/htpasswd $(root)$(bindir)/htpasswd
$(INSTALL_DATA) $(TOP)/$(SRC)/support/htpasswd.1 $(root)$(mandir)/man1/htpasswd.1
$(INSTALL_PROGRAM) $(TOP)/$(SRC)/support/htdigest $(root)$(bindir)/htdigest
$(INSTALL_DATA) $(TOP)/$(SRC)/support/htdigest.1 $(root)$(mandir)/man1/htdigest.1
@echo "$(INSTALL_SCRIPT) $(TOP)/$(SRC)/support/dbmmanage[*] $(root)$(bindir)/dbmmanage"; \
$(INSTALL_SCRIPT) $(TOP)/$(SRC)/support/dbmmanage $(root)$(bindir)/dbmmanage
$(INSTALL_DATA) $(TOP)/$(SRC)/support/dbmmanage.1 $(root)$(mandir)/man1/dbmmanage.1
$(INSTALL_PROGRAM) $(TOP)/$(SRC)/support/logresolve $(root)$(sbindir)/logresolve
$(INSTALL_DATA) $(TOP)/$(SRC)/support/logresolve.8 $(root)$(mandir)/man8/logresolve.8
$(INSTALL_PROGRAM) $(TOP)/$(SRC)/support/rotatelogs $(root)$(sbindir)/rotatelogs
$(INSTALL_DATA) $(TOP)/$(SRC)/support/rotatelogs.8 $(root)$(mandir)/man8/rotatelogs.8
@echo "$(INSTALL_SCRIPT) $(TOP)/$(SRC)/support/apxs[*] $(root)$(sbindir)/apxs"; \
$(INSTALL_SCRIPT) $(TOP)/$(SRC)/support/apxs $(root)$(sbindir)/apxs
$(INSTALL_DATA) $(TOP)/$(SRC)/support/apxs.8 $(root)$(mandir)/man8/apxs.8
-@if [ ".$(suexec)" = .1 ]; then \
echo "$(INSTALL_PROGRAM) $(TOP)/$(SRC)/support/suexec $(root)$(sbindir)/suexec"; \
$(INSTALL_PROGRAM) $(TOP)/$(SRC)/support/suexec $(root)$(sbindir)/suexec; \
echo "chown root $(root)$(sbindir)/suexec"; \
chown root $(root)$(sbindir)/suexec; \
echo "chmod 4711 $(root)$(sbindir)/suexec"; \
chmod 4711 $(root)$(sbindir)/suexec; \
echo "$(INSTALL_DATA) $(TOP)/$(SRC)/support/suexec.8 $(root)$(mandir)/man8/suexec.8"; \
$(INSTALL_DATA) $(TOP)/$(SRC)/support/suexec.8 $(root)$(mandir)/man8/suexec.8; \
fi
@echo "<=== [support]"
# install the Apache C header files
install-include:
@echo "===> [include: Installing Apache C header files]"
$(CP) $(TOP)/$(SRC)/include/*.h $(root)$(includedir)/
$(CP) $(TOP)/$(SRC)/lib/expat-lite/*.h $(root)$(includedir)/xml/
@osdir=`grep '^OSDIR=' $(TOP)/$(SRC)/Makefile.config | sed -e 's:^OSDIR=.*/os/ :o s/:'`; \
echo "$(CP) $(TOP)/$(SRC)/$${osdir}/os.h $(root)$(includedir)/"; \
$(CP) $(TOP)/$(SRC)/$${osdir}/os.h $(root)$(includedir)/; \
echo "$(CP) $(TOP)/$(SRC)/$${osdir}/os-inline.c $(root)$(includedir)/"; \
$(CP) $(TOP)/$(SRC)/$${osdir}/os-inline.c $(root)$(includedir)/
chmod 644 $(root)$(includedir)/*.h $(root)$(includedir)/xml/*.h
@echo "<=== [include]"
# create an initial document root containing the Apache manual,
# icons and distributed CGI scripts.
install-data:
@echo "===> [data: Installing initial data files]"
-@if [ -f $(root)$(htdocsdir)/index.html ] || [ -f $(root)$(htdocsdir)/index.html.en ]; then \
echo "[PRESERVING EXISTING DATA SUBDIR: $(root)$(htdocsdir)/]"; \
else \
echo "Copying tree $(TOP)/htdocs/ -> $(root)$(htdocsdir)/"; \
(cd $(TOP)/htdocs/ && $(TAR) $(TAROPT) - index* apache_pb.* ) |\
(cd $(root)$(htdocsdir)/ && $(TAR) -xf -); \
find $(root)$(htdocsdir)/ -type d -exec chmod a+rx {} \; ; \
find $(root)$(htdocsdir)/ -type f -print | xargs chmod a+r ; \
fi
-@if [ -d $(TOP)/htdocs/manual ]; then \
echo "Copying tree $(TOP)/htdocs/manual -> $(root)/$(manualdir)/"; \
(cd $(TOP)/htdocs/manual/ && $(TAR) $(TAROPT) - *) |\
(cd $(root)$(manualdir)/ && $(TAR) -xf -); \
find $(root)$(manualdir)/ -type d -exec chmod a+rx {} \; ; \
find $(root)$(manualdir)/ -type f -print | xargs chmod a+r ; \
fi
-@if [ -f $(root)$(cgidir)/printenv ]; then \
echo "[PRESERVING EXISTING CGI SUBDIR: $(root)$(cgidir)/]"; \
else \
for script in printenv test-cgi; do \
cat $(TOP)/cgi-bin/$${script} |\
sed -e 's;^#!/.*perl;#!$(PERL);' \
> $(TOP)/$(SRC)/.apaci.install.tmp; \
echo "$(INSTALL_DATA) $(TOP)/conf/$${script}[*] $(root)$(cgidir)/$${script}"; \
$(INSTALL_DATA) $(TOP)/$(SRC)/.apaci.install.tmp $(root)$(cgidir)/$${script}; \
done; \
fi
@echo "Copying tree $(TOP)/icons/ -> $(root)$(iconsdir)/"; \
(cd $(TOP)/icons/ && $(TAR) $(TAROPT) - *) |\
(cd $(root)$(iconsdir)/ && $(TAR) -xf -); \
find $(root)$(iconsdir)/ -type d -exec chmod a+rx {} \; ;\
find $(root)$(iconsdir)/ -type f -exec chmod a+r {} \;
@echo "<=== [data]"
# create the initial configuration by providing default files
# and initial config files while preserving existing ones.
install-config:
@echo "===> [config: Installing Apache configuration files]"
-@for conf in httpd.conf access.conf srm.conf; do \
if [ .$$conf = .httpd.conf ]; then \
target_conf="$(TARGET).conf"; \
else \
target_conf="$$conf"; \
fi; \
if [ ".$(TARGET)" = .httpd ]; then \
target_prefix=""; \
else \
target_prefix="$(TARGET)_"; \
fi; \
(echo "##"; \
echo "## $${target_conf} -- Apache HTTP server configuration file"; \
echo "##"; \
echo ""; \
cat $(TOP)/conf/$${conf}-dist ) |\
sed -e '/# LoadModule/r $(TOP)/$(SRC)/.apaci.install.conf' \
-e 's;@@ServerRoot@@/htdocs/manual;$(manualdir);' \
-e 's;@@ServerRoot@@/htdocs;$(htdocsdir);' \
-e 's;@@ServerRoot@@/icons;$(iconsdir);' \
-e 's;@@ServerRoot@@/cgi-bin;$(cgidir);' \
-e 's;@@ServerRoot@@/proxy;$(proxycachedir);' \
-e 's;@@ServerRoot@@;$(prefix);g' \
-e 's;httpd\.conf;$(TARGET).conf;' \
-e 's;logs/accept\.lock;$(runtimedir)/$(TARGET).lock;' \
-e 's;logs/apache_runtime_status;$(runtimedir)/$(TARGET).scoreboard;' \
-e 's;logs/httpd\.pid;$(runtimedir)/$(TARGET).pid;' \
-e "s;logs/access_log;$(logfiledir)/$${target_prefix}access_log;" \
-e "s;logs/error_log;$(logfiledir)/$${target_prefix}error_log;" \
-e "s;logs/referer_log;$(logfiledir)/$${target_prefix}referer_log;" \
-e "s;logs/agent_log;$(logfiledir)/$${target_prefix}agent_log;" \
-e 's;conf/magic;$(sysconfdir)/magic;' \
-e 's;conf/srm.conf;$(sysconfdir)/srm.conf;' \
-e 's;conf/access.conf;$(sysconfdir)/access.conf;' \
-e 's;conf/mime\.types;$(sysconfdir)/mime.types;' \
-e 's;User nobody;User $(conf_user);' \
-e 's;Group #-1;Group $(conf_group);' \
-e 's;^Group "#-1";Group $(conf_group);' \
-e 's;Port 80;Port $(conf_port);' \
-e 's;ServerAdmin [email]you@your.addr[/email]ess;ServerAdmin $(conf_serveradmin);' \
-e 's;ServerName new.host.name;ServerName $(conf_servername);' \
> $(TOP)/$(SRC)/.apaci.install.tmp && \
echo "$(INSTALL_DATA) $(TOP)/conf/$${conf}-dist[*] $(root)$(sysconfdir)/$${target_conf}.default"; \
$(INSTALL_DATA) $(TOP)/$(SRC)/.apaci.install.tmp $(root)$(sysconfdir)/$${target_conf}.default; \
if [ ! -f "$(root)$(sysconfdir)/$${target_conf}" ]; then \
echo "$(INSTALL_DATA) $(TOP)/conf/$${conf}-dist[*] $(root)$(sysconfdir)/$${target_conf}"; \
$(INSTALL_DATA) $(TOP)/$(SRC)/.apaci.install.tmp $(root)$(sysconfdir)/$${target_conf}; \
else \
echo "[PRESERVING EXISTING CONFIG FILE: $(root)$(sysconfdir)/$${target_conf}]"; \
fi; \
done
-@for conf in mime.types magic; do \
echo "$(INSTALL_DATA) $(TOP)/conf/$${conf} $(root)$(sysconfdir)/$${conf}.default"; \
$(INSTALL_DATA) $(TOP)/conf/$${conf} $(root)$(sysconfdir)/$${conf}.default; \
if [ ! -f "$(root)$(sysconfdir)/$${conf}" ]; then \
echo "$(INSTALL_DATA) $(TOP)/conf/$${conf} $(root)$(sysconfdir)/$${conf}"; \
$(INSTALL_DATA) $(TOP)/conf/$${conf} $(root)$(sysconfdir)/$${conf}; \
else \
echo "[PRESERVING EXISTING CONFIG FILE: $(root)$(sysconfdir)/$${conf}]"; \
fi; \
done
@echo "<=== [config]"
## ------------------------------------------------------------------
## Cleanup Targets
## ------------------------------------------------------------------
# cleanup the source tree by removing anything which was
# created by the build target
clean:
@echo "===> $(SRC)"
@$(MAKE) -f $(TOP)/$(MKF) $(MFLAGS) $(MFWD) clean-std $(clean-support)
@echo "<=== $(SRC)"
@$(RM) $(TOP)/$(SRC)/.apaci.build.ok
# clean the standard stuff
clean-std:
@cd $(TOP)/$(SRC); $(MAKE) $(MFLAGS) SDP=$(SRC)/ clean
# clean additional support stuff
clean-support:
@echo "===> $(SRC)/support"; \
cd $(TOP)/$(SRC)/support; $(MAKE) $(MFLAGS) clean; \
if [ ".$(suexec)" = .1 ]; then \
echo "$(RM) suexec"; \
$(RM) suexec; \
fi; \
echo "<=== $(SRC)/support"
# cleanup the source tree by removing anything which was
# created by the configure step and the build target.
# When --shadow is used we just remove the complete shadow tree.
distclean:
@if [ ".$(SRC)" = .src ]; then \
$(MAKE) -f $(TOP)/$(MKF) $(MFLAGS) $(MFWD) distclean-normal; \
else \
$(MAKE) -f $(TOP)/$(MKF) $(MFLAGS) $(MFWD) distclean-shadow; \
fi
distclean-normal:
@echo "===> $(SRC)"
@$(MAKE) -f $(TOP)/$(MKF) $(MFLAGS) $(MFWD) distclean-std $(distclean-support)
@echo "<=== $(SRC)"
-$(RM) $(SRC)/Configuration.apaci
-$(RM) $(SRC)/apaci
@$(RM) $(SRC)/.apaci.build.ok
-$(RM) Makefile
-$(RM) config.status
# clean the standard stuff
distclean-std:
@cd $(TOP)/$(SRC); $(MAKE) $(MFLAGS) SDP=$(SRC)/ distclean
distclean-support:
@echo "===> $(SRC)/support"; \
cd $(TOP)/$(SRC)/support; $(MAKE) $(MFLAGS) distclean; \
if [ ".$(suexec)" = .1 ]; then \
echo "$(RM) suexec"; \
$(RM) suexec; \
fi; \
echo "<=== $(SRC)/support"
distclean-shadow:
$(RM) -r $(SRC)
$(RM) $(TOP)/$(MKF)
-@if [ ".`ls $(TOP)/src.* 2>/dev/null`" = . ]; then \
echo "$(RM) Makefile"; \
$(RM) Makefile; \
fi