Przeinstalowanie systemu

Pomoc dotycząca instalacji systemu
szaman
Posty: 55
Rejestracja: 24 stycznia 2007, 12:36

Post autor: szaman »

Dzięki wielkie za pomoc udało się.

Mam jeszcze dwa pytania:
1.Czy da się spolszczyć KDE 3.5
2.Jak zainstalować np.Firefox-a
Kaka'
Senior Member
Posty: 3018
Rejestracja: 30 lipca 2006, 13:17
Lokalizacja: Kartuzy

Post autor: Kaka' »

1.Cy da się spolszczyć KDE 3.5

Kod: Zaznacz cały

aptitude update && aptitude install kde-i18n-pl
2.Jak zainstalować np.Firefox-a

Kod: Zaznacz cały

aptitude update && aptitude install firefox
szaman
Posty: 55
Rejestracja: 24 stycznia 2007, 12:36

Post autor: szaman »

Witam

Problem naprawiłęm poprzez przeinstalowanie systemu. Dopuki nie zrestartuje po instalcji kde kompa wszystko dziala a pozniej juz nie chce sie włączyć kde, wpisuje startx pokazuje sie czarny ekran i po chwili wraca do lini komend ponowna konfiguracja xorga nic nie daje

Oto moj plik Xorg

Kod: Zaznacz cały

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
	FontPath	"/usr/share/fonts/X11/misc"
	FontPath	"/usr/X11R6/lib/X11/fonts/misc"
	FontPath	"/usr/share/fonts/X11/cyrillic"
	FontPath	"/usr/X11R6/lib/X11/fonts/cyrillic"
	FontPath	"/usr/share/fonts/X11/100dpi/:unscaled"
	FontPath	"/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
	FontPath	"/usr/share/fonts/X11/75dpi/:unscaled"
	FontPath	"/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
	FontPath	"/usr/share/fonts/X11/Type1"
	FontPath	"/usr/X11R6/lib/X11/fonts/Type1"
	FontPath	"/usr/share/fonts/X11/100dpi"
	FontPath	"/usr/X11R6/lib/X11/fonts/100dpi"
	FontPath	"/usr/share/fonts/X11/75dpi"
	FontPath	"/usr/X11R6/lib/X11/fonts/75dpi"
	# path to defoma fonts
	FontPath	"/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
	Load	"bitmap"
	Load	"dbe"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"record"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"pl"
	Option		"XkbVariant"	"ad"
	Option		"XkbOptions"	"pl"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ImPS/2"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "Device"
	Identifier	"ATI Technologies Inc RV350 AP [Radeon 9600]"
	Driver		"ati"
	BusID		"PCI:1:0:0"
	Option		"UseFBDev"		"true"
EndSection

Section "Monitor"
	Identifier	"SyncMaster"
	Option		"DPMS"
	HorizSync	30-70
	VertRefresh	50-160
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI Technologies Inc RV350 AP [Radeon 9600]"
	Monitor		"SyncMaster"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1280x1024" "1152x864" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1280x1024" "1152x864" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1280x1024" "1152x864" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1280x1024" "1152x864" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1280x1024" "1152x864" "1024x768" "800x600" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1280x1024" "1152x864" "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
EndSection

Section "DRI"
	Mode	0666
EndSection


a to sa ostanie linijki loga

Kod: Zaznacz cały

(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0xf9000000 - 0xf900ffff (0x10000) MX[B]
	[1] 0	0	0xd0000000 - 0xdfffffff (0x10000000) MX[B]
	[2] -1	0	0x00100000 - 0x1fffffff (0x1ff00000) MX[B]E(B)
	[3] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[4] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[5] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[6] -1	0	0xfa005000 - 0xfa0050ff (0x100) MX[B]
	[7] -1	0	0xfa000000 - 0xfa003fff (0x4000) MX[B]
	[8] -1	0	0xfa004000 - 0xfa0047ff (0x800) MX[B]
	[9] -1	0	0xfa102000 - 0xfa1020ff (0x100) MX[B]
	[10] -1	0	0xfa101000 - 0xfa1011ff (0x200) MX[B]
	[11] -1	0	0x20000000 - 0x200003ff (0x400) MX[B]
	[12] -1	0	0xfa100000 - 0xfa1003ff (0x400) MX[B]
	[13] -1	0	0xf0000000 - 0xefffffff (0x0) MX[B]O
	[14] -1	0	0xf9000000 - 0xf900ffff (0x10000) MX[B](B)
	[15] -1	0	0xd0000000 - 0xdfffffff (0x10000000) MX[B](B)
	[16] -1	0	0xf9010000 - 0xf901ffff (0x10000) MX[B](B)
	[17] -1	0	0xe0000000 - 0xefffffff (0x10000000) MX[B](B)
	[18] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
	[19] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
	[20] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
	[21] 0	0	0x00009000 - 0x000090ff (0x100) IX[B]
	[22] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[23] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[24] -1	0	0x0000a800 - 0x0000a8ff (0x100) IX[B]
	[25] -1	0	0x0000a400 - 0x0000a407 (0x8) IX[B]
	[26] -1	0	0x0000a000 - 0x0000a03f (0x40) IX[B]
	[27] -1	0	0x0000dc00 - 0x0000dc3f (0x40) IX[B]
	[28] -1	0	0x0000d800 - 0x0000d8ff (0x100) IX[B]
	[29] -1	0	0x00000500 - 0x0000051f (0x20) IX[B]
	[30] -1	0	0x0000d000 - 0x0000d00f (0x10) IX[B]
	[31] -1	0	0x0000cc00 - 0x0000cc03 (0x4) IX[B]
	[32] -1	0	0x0000c800 - 0x0000c807 (0x8) IX[B]
	[33] -1	0	0x0000c400 - 0x0000c403 (0x4) IX[B]
	[34] -1	0	0x0000c000 - 0x0000c007 (0x8) IX[B]
	[35] -1	0	0x0000f000 - 0x0000f00f (0x10) IX[B]
	[36] -1	0	0x0000b800 - 0x0000b81f (0x20) IX[B]
	[37] -1	0	0x0000b400 - 0x0000b41f (0x20) IX[B]
	[38] -1	0	0x0000b000 - 0x0000b01f (0x20) IX[B]
	[39] -1	0	0x0000bc00 - 0x0000bc1f (0x20) IX[B]
	[40] -1	0	0x00009000 - 0x000090ff (0x100) IX[B](B)
	[41] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[42] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(**) RADEON(0): RADEONScreenInit d0000000 0
(**) RADEON(0): Map: 0xd0000000, 0x10000000
(**) RADEON(0): RADEONSave
(**) RADEON(0): RADEONSaveMode(0x81fda40)
(**) RADEON(0): Read: 0x0030000c 0x00030065 0x00000000
(**) RADEON(0): Read: rd=12, fd=101, pd=3
(**) RADEON(0): RADEONSaveMode returns 0x81fda40
(**) RADEON(0): RADEONInitMemoryMap() : 
(**) RADEON(0):   mem_size         : 0x10000000
(**) RADEON(0):   MC_FB_LOCATION   : 0xdfffd000
(**) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(**) RADEON(0): RADEONModeInit()
1280x1024     108.00  1280 1328 1440 1688  1024 1025 1028 1066 (24,32) +H +V
1280x1024     108.00  1280 1328 1440 1688  1024 1025 1028 1066 (24,32) +H +V
(**) RADEON(0): Pitch = 10485920 bytes (virtualX = 1280, displayWidth = 1280)
(**) RADEON(0): dc=10800, of=21600, fd=96, pd=2
(**) RADEON(0): RADEONInit returns 0x81fe3f0
(**) RADEON(0): RADEONRestoreMode()
(**) RADEON(0): RADEONRestoreMode(0x81fe3f0)
(**) RADEON(0): RADEONRestoreMemMapRegisters() : 
(**) RADEON(0):   MC_FB_LOCATION   : 0xdfffd000
(**) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(**) RADEON(0):   Map Changed ! Applying ...
(**) RADEON(0):   Map applied, resetting engine ...
(**) RADEON(0): Updating display base addresses...
(**) RADEON(0): Memory map updated.
(**) RADEON(0): Programming CRTC1, offset: 0x00000000
(**) RADEON(0): Wrote: 0x0000000c 0x00010060 0x00000000 (0x0000a700)
(**) RADEON(0): Wrote: rd=12, fd=96, pd=1
(**) RADEON(0): GRPH_BUFFER_CNTL from 30004c4c to 20257c7c
(**) RADEON(0): RADEONSaveScreen(0)
(II) RADEON(0): Depth moves disabled by default
(**) RADEON(0): Setting up initial surfaces
(**) RADEON(0): Initializing fb layer
(**) RADEON(0): Setting up accel memmap
(II) RADEON(0): Memory manager initialized to (0,0) (1280,8191)
(II) RADEON(0): Reserved area from (0,1024) to (1280,1026)
(II) RADEON(0): Largest offscreen area available: 1280 x 7165
(**) RADEON(0): Initializing backing store
(==) RADEON(0): Backing store disabled
(WW) RADEON(0): Direct rendering disabled
(**) RADEON(0): Setting up final surfaces
(**) RADEON(0): Initializing Acceleration
(II) RADEON(0): Render acceleration unsupported on Radeon 9500/9700 and newer.
(II) RADEON(0): Render acceleration disabled
(**) RADEON(0): EngineInit (32/32)
(**) RADEON(0): Pitch for acceleration = 160
(**) RADEON(0): EngineRestore (32/32)
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Indirect CPU to Screen color expansion
	Solid Lines
	Scanline Image Writes
	Offscreen Pixmaps
	Setting up tile and stipple cache:
		32 128x128 slots
		32 256x256 slots
		16 512x512 slots
(II) RADEON(0): Acceleration enabled
(**) RADEON(0): Initializing DPMS
(**) Option "dpms"
(**) RADEON(0): DPMS enabled
(**) RADEON(0): Initializing Cursor
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor (scanline 1026)
(II) RADEON(0): Largest offscreen area available: 1280 x 7161
(**) RADEON(0): Initializing color map
(**) RADEON(0): Initializing DGA
(**) RADEON(0): Initializing Xv
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia/theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	ABI class: X.Org Video Driver, version 1.0
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(**) RADEON(0): RADEONScreenInit finished
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(EE) AIGLX: Screen 0 is not DRI capable
(II) Loading local sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions/libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(**) Option "CoreKeyboard"
(**) Generic Keyboard: Core Keyboard
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "pl"
(**) Generic Keyboard: XkbLayout: "pl"
(**) Option "XkbVariant" "ad"
(**) Generic Keyboard: XkbVariant: "ad"
(**) Option "XkbOptions" "pl"
(**) Generic Keyboard: XkbOptions: "pl"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(**) Option "Protocol" "ImPS/2"
(**) Configured Mouse: Device: "/dev/input/mice"
(**) Configured Mouse: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(EE) xf86OpenSerial: Cannot open device /dev/input/mice
	No such device.
(EE) Configured Mouse: cannot open input device
(EE) PreInit failed for input device "Configured Mouse"
(II) UnloadModule: "mouse"
(WW) No core pointer registered
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
    xkb_keycodes             { include "xfree86+aliases(qwerty)" };
    xkb_types                { include "complete" };
    xkb_compatibility        { include "complete" };
    xkb_symbols              { include "pc(pc105)+pl(ad)" };
    xkb_geometry             { include "pc(pc105)" };
No core pointer

Fatal server error:
failed to initialize core devices
(**) RADEON(0): RADEONLeaveVT
(**) RADEON(0): RADEONRestore
(**) RADEON(0): RADEONRestoreMode()
(**) RADEON(0): RADEONRestoreMode(0x81fda40)
(**) RADEON(0): RADEONRestoreMemMapRegisters() : 
(**) RADEON(0):   MC_FB_LOCATION   : 0x1fff0000
(**) RADEON(0):   MC_AGP_LOCATION  : 0x27ff2000
(**) RADEON(0):   Map Changed ! Applying ...
(**) RADEON(0):   Map applied, resetting engine ...
(**) RADEON(0): Updating display base addresses...
(**) RADEON(0): Memory map updated.
(**) RADEON(0): Programming CRTC1, offset: 0x00000000
(**) RADEON(0): Wrote: 0x0030000c 0x00030065 0x00000000 (0x0000a700)
(**) RADEON(0): Wrote: rd=12, fd=101, pd=3
(**) RADEON(0): Ok, leaving now...
luck40
Beginner
Posty: 120
Rejestracja: 14 listopada 2006, 17:29
Lokalizacja: okolice Czêstochowy

Post autor: luck40 »

szaman pisze:(EE) xf86OpenSerial: Cannot open device /dev/input/mice
No such device.
(EE) Configured Mouse: cannot open input device
(EE) PreInit failed for input device "Configured Mouse"
problem z myszką
w tym temacie na stronie 2 coś znajdziesz
http://debian.linux.pl/viewtopic.php?t= ... z&start=15
szaman
Posty: 55
Rejestracja: 24 stycznia 2007, 12:36

Post autor: szaman »

Ale tak jak poczytałem pod tym adresem to większość osob ma tak ustawioną myszke pod usb jak ja

Kod: Zaznacz cały

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ImPS/2"
	Option		"Emulate3Buttons"	"true"
EndSection
Kaka'
Senior Member
Posty: 3018
Rejestracja: 30 lipca 2006, 13:17
Lokalizacja: Kartuzy

Post autor: Kaka' »

luck40 pisze:(EE) xf86OpenSerial: Cannot open device /dev/input/mice
No such device.
(EE) Configured Mouse: cannot open input device
(EE) PreInit failed for input device "Configured Mouse"
Przecież pisze jak byk...

Kod: Zaznacz cały

modprobe mousedev
szaman
Posty: 55
Rejestracja: 24 stycznia 2007, 12:36

Post autor: szaman »

po wpisaniu

Kod: Zaznacz cały

modprobe mousedev
pokazuje się takie coś

Kod: Zaznacz cały

mice: PS/2 mouse device common for all mice
stabio
Posty: 1
Rejestracja: 19 kwietnia 2007, 00:17

Post autor: stabio »

Witam, ja mam teki problem po odpaleniu z kota root komendy startx mam takie cos:

Kod: Zaznacz cały

sd-5557:~# startx
xauth:  creating new authority file /root/.serverauth.3688

X: warning; process set to priority -1 instead of requested priority 0

X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: UNKNOWN 
Current Operating System: Linux sd-5557 2.6.17.4dedibox_r5 #1 Thu Jul 13 22:28:23 CEST 2006 i686
Build Date: 04 April 2007
        Before reporting problems, check [url]http://wiki.x.org[/url]
        to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 19 00:45:19 2007
(==) Using config file: "/etc/X11/xorg.conf"
(EE) Failed to load module "bitmap" (module does not exist, 0)
(EE) Failed to load module "pcidata" (module does not exist, 0)

Fatal server error:
Unable to load required base modules, Exiting...

XIO:  fatal IO error 104 (Connection reset by peer) on X server ":0.0"
      after 0 requests (0 known processed) with 0 events remaining.
Widzialem, ze wielu juz sie spotkalo z tym problemem ale jakos nikt nie znalazl odpowiedzi :( Pomozecie mi ?
ODPOWIEDZ