Problem z logowaniem Lightdm.

syngromu88 · Post autor: **syngromu88** » 10 października 2015, 16:04

Witam!
Korzystam z Debiana 8 Jessie (po aktualizacji 8.2).
Już od dłuższego czasu pracuję z pulpitem LXQt i nigdy nie było problemów.
Dzisiaj zrobiłem aktualizację podczas której zostały zainstalowane albo zaktualizowane biblioteki qt z repozytorium:

Kod: Zaznacz cały

deb http://packages.siduction.org/lxqt  jessie-backports  main
deb-src http://packages.siduction.org/lxqt  jessie-backports  main

Pomimo tego że ustawiłem w lightdm autologowanie to otrzymuję ekran logowania, wpisuję użytkownika i hasło po czym mam czarny ekran i znowu muszę się logować.
Nie mogę się dostać ani jako użytkownik, ani root.
W trybie tekstowym nie mam takiego problemu.
Próbowałem też zmianę lightdm na slim, ale efekt był taki sam.
Próbowałem też z poleceniami:

Kod: Zaznacz cały

apt-get install --reinstall lightdm
dpkg -reconfigure lightdm

Ale niestety nie pomogło.
Polecenie startx nie działa.
Proszę o pomoc.

Post autor: **marcin1982** » 10 października 2015, 16:24

Pokaż jakiś log LightDM oraz /var/log/Xorg.0.log.

syngromu88 · Post autor: **syngromu88** » 10 października 2015, 16:33

Zawartość /var/log/Xorg.0.log:

Kod: Zaznacz cały

[   103.360] 
X.Org X Server 1.16.4
Release Date: 2014-12-20
[   103.360] X Protocol Version 11, Revision 0
[   103.360] Build Operating System: Linux 3.2.0-4-amd64 i686 Debian
[   103.360] Current Operating System: Linux debian 3.16.0-4-686-pae #1 SMP Debian 3.16.7-ckt11-1+deb8u4 (2015-09-19) i686
[   103.360] Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-686-pae root=UUID=1eee5066-de6a-4e25-98f2-b136754e5860 ro quiet
[   103.360] Build Date: 11 February 2015  01:14:26AM
[   103.360] xorg-server 2:1.16.4-1 (http://www.debian.org/support) 
[   103.360] Current version of pixman: 0.32.6
[   103.360]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[   103.360] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   103.360] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 10 15:38:32 2015
[   103.361] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   103.361] (==) No Layout section.  Using the first Screen section.
[   103.361] (==) No screen section available. Using defaults.
[   103.361] (**) |-->Screen "Default Screen Section" (0)
[   103.361] (**) |   |-->Monitor "<default monitor>"
[   103.362] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[   103.362] (==) Automatically adding devices
[   103.362] (==) Automatically enabling devices
[   103.362] (==) Automatically adding GPU devices
[   103.362] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   103.362]     Entry deleted from font path.
[   103.362] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[   103.362]     Entry deleted from font path.
[   103.362] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[   103.362]     Entry deleted from font path.
[   103.362] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[   103.362]     Entry deleted from font path.
[   103.362] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[   103.362]     Entry deleted from font path.
[   103.362] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[   103.362]     Entry deleted from font path.
[   103.362] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    built-ins
[   103.362] (==) ModulePath set to "/usr/lib/xorg/modules"
[   103.362] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[   103.362] (II) Loader magic: 0xb770f700
[   103.362] (II) Module ABI versions:
[   103.362]     X.Org ANSI C Emulation: 0.4
[   103.362]     X.Org Video Driver: 18.0
[   103.362]     X.Org XInput driver : 21.0
[   103.362]     X.Org Server Extension : 8.0
[   103.363] (II) xfree86: Adding drm device (/dev/dri/card0)
[   103.365] (--) PCI:*(0:0:2:0) 8086:0106:17aa:5011 rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00003000/64
[   103.365] (II) LoadModule: "glx"
[   103.366] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   103.368] (II) Module glx: vendor="X.Org Foundation"
[   103.368]     compiled for 1.16.4, module version = 1.0.0
[   103.368]     ABI class: X.Org Server Extension, version 8.0
[   103.368] (==) AIGLX enabled
[   103.368] (==) Matched intel as autoconfigured driver 0
[   103.368] (==) Matched intel as autoconfigured driver 1
[   103.368] (==) Matched modesetting as autoconfigured driver 2
[   103.368] (==) Matched fbdev as autoconfigured driver 3
[   103.368] (==) Matched vesa as autoconfigured driver 4
[   103.368] (==) Assigned the driver to the xf86ConfigLayout
[   103.368] (II) LoadModule: "intel"
[   103.368] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[   103.369] (II) Module intel: vendor="X.Org Foundation"
[   103.369]     compiled for 1.15.99.904, module version = 2.21.15
[   103.369]     Module class: X.Org Video Driver
[   103.369]     ABI class: X.Org Video Driver, version 18.0
[   103.369] (II) LoadModule: "modesetting"
[   103.369] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   103.369] (II) Module modesetting: vendor="X.Org Foundation"
[   103.369]     compiled for 1.16.4, module version = 0.9.0
[   103.369]     Module class: X.Org Video Driver
[   103.369]     ABI class: X.Org Video Driver, version 18.0
[   103.369] (II) LoadModule: "fbdev"
[   103.369] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   103.370] (II) Module fbdev: vendor="X.Org Foundation"
[   103.370]     compiled for 1.15.99.904, module version = 0.4.4
[   103.370]     Module class: X.Org Video Driver
[   103.370]     ABI class: X.Org Video Driver, version 18.0
[   103.370] (II) LoadModule: "vesa"
[   103.370] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   103.370] (II) Module vesa: vendor="X.Org Foundation"
[   103.370]     compiled for 1.15.99.904, module version = 2.3.3
[   103.370]     Module class: X.Org Video Driver
[   103.370]     ABI class: X.Org Video Driver, version 18.0
[   103.370] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
    i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
    915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
    Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
    HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
    HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
    HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
    HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[   103.371] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   103.371] (II) FBDEV: driver for framebuffer: fbdev
[   103.371] (II) VESA: driver for VESA chipsets: vesa
[   103.371] (++) using VT number 7

[   103.372] (WW) Falling back to old probe method for modesetting
[   103.372] (WW) Falling back to old probe method for fbdev
[   103.372] (II) Loading sub module "fbdevhw"
[   103.372] (II) LoadModule: "fbdevhw"
[   103.372] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[   103.372] (II) Module fbdevhw: vendor="X.Org Foundation"
[   103.372]     compiled for 1.16.4, module version = 0.0.2
[   103.372]     ABI class: X.Org Video Driver, version 18.0
[   103.372] (WW) Falling back to old probe method for vesa
[   103.373] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[   103.373] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[   103.373] (==) intel(0): RGB weight 888
[   103.373] (==) intel(0): Default visual is TrueColor
[   103.373] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 2000
[   103.373] (**) intel(0): Relaxed fencing enabled
[   103.373] (**) intel(0): Wait on SwapBuffers? enabled
[   103.373] (**) intel(0): Triple buffering? enabled
[   103.373] (**) intel(0): Framebuffer tiled
[   103.373] (**) intel(0): Pixmaps tiled
[   103.373] (**) intel(0): 3D buffers tiled
[   103.373] (**) intel(0): SwapBuffers wait enabled
[   103.373] (==) intel(0): video overlay key set to 0x101fe
[   103.373] (II) intel(0): Output LVDS1 has no monitor section
[   103.373] (--) intel(0): found backlight control interface /sys/class/backlight/intel_backlight
[   103.375] (II) intel(0): Output VGA1 has no monitor section
[   103.375] (II) intel(0): Output HDMI1 has no monitor section
[   103.375] (II) intel(0): Output DP1 has no monitor section
[   103.375] (II) intel(0): EDID for output LVDS1
[   103.375] (II) intel(0): Manufacturer: CMO  Model: 15a3  Serial#: 0
[   103.375] (II) intel(0): Year: 2010  Week: 31
[   103.375] (II) intel(0): EDID Version: 1.3
[   103.375] (II) intel(0): Digital Display Input
[   103.375] (II) intel(0): Max Image Size [cm]: horiz.: 35  vert.: 19
[   103.375] (II) intel(0): Gamma: 2.20
[   103.375] (II) intel(0): No DPMS capabilities specified
[   103.375] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[   103.375] (II) intel(0): First detailed timing is preferred mode
[   103.375] (II) intel(0): redX: 0.617 redY: 0.340   greenX: 0.320 greenY: 0.598
[   103.375] (II) intel(0): blueX: 0.160 blueY: 0.084   whiteX: 0.313 whiteY: 0.329
[   103.375] (II) intel(0): Manufacturer's mask: 0
[   103.375] (II) intel(0): Supported detailed timing:
[   103.375] (II) intel(0): clock: 69.3 MHz   Image Size:  344 x 193 mm
[   103.376] (II) intel(0): h_active: 1366  h_sync: 1382  h_sync_end 1416 h_blank_end 1466 h_border: 0
[   103.376] (II) intel(0): v_active: 768  v_sync: 770  v_sync_end 776 v_blanking: 788 v_border: 0
[   103.376] (II) intel(0):  N156BGE-L11
[   103.376] (II) intel(0):  CMO
[   103.376] (II) intel(0):  N156BGE-L11
[   103.376] (II) intel(0): EDID (in hex):
[   103.376] (II) intel(0):     00ffffffffffff000dafa31500000000
[   103.376] (II) intel(0):     1f140103802313780a00259e57529929
[   103.376] (II) intel(0):     15505400000001010101010101010101
[   103.376] (II) intel(0):     010101010101121b5664500014301022
[   103.376] (II) intel(0):     260058c110000018000000fe004e3135
[   103.376] (II) intel(0):     364247452d4c31310a20000000fe0043
[   103.376] (II) intel(0):     4d4f0a202020202020202020000000fe
[   103.376] (II) intel(0):     004e3135364247452d4c31310a20009b
[   103.376] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[   103.376] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   103.376] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   103.376] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[   103.376] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[   103.376] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[   103.376] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[   103.376] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[   103.376] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[   103.376] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[   103.376] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[   103.376] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[   103.376] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[   103.376] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[   103.376] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[   103.376] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[   103.376] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[   103.376] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[   103.376] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[   103.376] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[   103.376] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[   103.377] (II) intel(0): Printing probed modes for output LVDS1
[   103.377] (II) intel(0): Modeline "1366x768"x60.0   69.30  1366 1382 1416 1466  768 770 776 788 -hsync -vsync (47.3 kHz eP)
[   103.377] (II) intel(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz d)
[   103.377] (II) intel(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz d)
[   103.377] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[   103.377] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[   103.377] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[   103.377] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[   103.378] (II) intel(0): EDID for output VGA1
[   103.378] (II) intel(0): EDID for output HDMI1
[   103.378] (II) intel(0): EDID for output DP1
[   103.378] (II) intel(0): Output LVDS1 connected
[   103.378] (II) intel(0): Output VGA1 disconnected
[   103.378] (II) intel(0): Output HDMI1 disconnected
[   103.378] (II) intel(0): Output DP1 disconnected
[   103.378] (II) intel(0): Using exact sizes for initial modes
[   103.378] (II) intel(0): Output LVDS1 using initial mode 1366x768
[   103.379] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   103.379] (II) intel(0): Kernel page flipping support detected, enabling
[   103.379] (==) intel(0): DPI set to (96, 96)
[   103.379] (II) Loading sub module "fb"
[   103.379] (II) LoadModule: "fb"
[   103.379] (II) Loading /usr/lib/xorg/modules/libfb.so
[   103.379] (II) Module fb: vendor="X.Org Foundation"
[   103.379]     compiled for 1.16.4, module version = 1.0.0
[   103.379]     ABI class: X.Org ANSI C Emulation, version 0.4
[   103.379] (II) Loading sub module "dri2"
[   103.379] (II) LoadModule: "dri2"
[   103.379] (II) Module "dri2" already built-in
[   103.379] (II) UnloadModule: "modesetting"
[   103.379] (II) Unloading modesetting
[   103.379] (II) UnloadModule: "fbdev"
[   103.379] (II) Unloading fbdev
[   103.379] (II) UnloadSubModule: "fbdevhw"
[   103.379] (II) Unloading fbdevhw
[   103.379] (II) UnloadModule: "vesa"
[   103.379] (II) Unloading vesa
[   103.379] (==) Depth 24 pixmap format is 32 bpp
[   103.380] (II) intel(0): [DRI2] Setup complete
[   103.380] (II) intel(0): [DRI2]   DRI driver: i965
[   103.380] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[   103.381] (II) UXA(0): Driver registered support for the following operations:
[   103.381] (II)         solid
[   103.381] (II)         copy
[   103.381] (II)         composite (RENDER acceleration)
[   103.381] (II)         put_image
[   103.381] (II)         get_image
[   103.382] (==) intel(0): Backing store enabled
[   103.382] (==) intel(0): Silken mouse enabled
[   103.382] (II) intel(0): Initializing HW Cursor
[   103.382] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   103.382] (==) intel(0): DPMS enabled
[   103.382] (==) intel(0): Intel XvMC decoder enabled
[   103.382] (II) intel(0): Set up textured video
[   103.382] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[   103.382] (II) intel(0): direct rendering: DRI2 Enabled
[   103.382] (==) intel(0): hotplug detection: "enabled"
[   103.396] (--) RandR disabled
[   103.410] (II) SELinux: Disabled on system
[   103.419] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   103.419] (II) AIGLX: enabled GLX_ARB_create_context
[   103.419] (II) AIGLX: enabled GLX_ARB_create_context_profile
[   103.419] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[   103.419] (II) AIGLX: enabled GLX_INTEL_swap_event
[   103.419] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[   103.419] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[   103.419] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[   103.419] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   103.419] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[   103.419] (II) AIGLX: Loaded and initialized i965
[   103.419] (II) GLX: Initialized DRI2 GL provider for screen 0
[   103.420] (II) intel(0): Setting screen physical size to 361 x 203
[   103.461] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[   103.461] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   103.461] (II) LoadModule: "evdev"
[   103.462] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   103.462] (II) Module evdev: vendor="X.Org Foundation"
[   103.462]     compiled for 1.16.0, module version = 2.9.0
[   103.462]     Module class: X.Org XInput Driver
[   103.462]     ABI class: X.Org XInput driver, version 21.0
[   103.462] (II) Using input driver 'evdev' for 'Power Button'
[   103.462] (**) Power Button: always reports core events
[   103.462] (**) evdev: Power Button: Device: "/dev/input/event3"
[   103.462] (--) evdev: Power Button: Vendor 0 Product 0x1
[   103.462] (--) evdev: Power Button: Found keys
[   103.462] (II) evdev: Power Button: Configuring as keyboard
[   103.462] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
[   103.462] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   103.462] (**) Option "xkb_rules" "evdev"
[   103.462] (**) Option "xkb_model" "pc105"
[   103.462] (**) Option "xkb_layout" "pl"
[   103.486] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[   103.486] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   103.486] (II) Using input driver 'evdev' for 'Video Bus'
[   103.486] (**) Video Bus: always reports core events
[   103.486] (**) evdev: Video Bus: Device: "/dev/input/event11"
[   103.486] (--) evdev: Video Bus: Vendor 0 Product 0x6
[   103.486] (--) evdev: Video Bus: Found keys
[   103.486] (II) evdev: Video Bus: Configuring as keyboard
[   103.486] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input13/event11"
[   103.486] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   103.486] (**) Option "xkb_rules" "evdev"
[   103.486] (**) Option "xkb_model" "pc105"
[   103.486] (**) Option "xkb_layout" "pl"
[   103.487] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[   103.487] (II) No input driver specified, ignoring this device.
[   103.487] (II) This device may have been added with another device file.
[   103.487] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[   103.487] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   103.487] (II) Using input driver 'evdev' for 'Sleep Button'
[   103.487] (**) Sleep Button: always reports core events
[   103.487] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[   103.487] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[   103.487] (--) evdev: Sleep Button: Found keys
[   103.487] (II) evdev: Sleep Button: Configuring as keyboard
[   103.487] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event2"
[   103.487] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[   103.487] (**) Option "xkb_rules" "evdev"
[   103.487] (**) Option "xkb_model" "pc105"
[   103.487] (**) Option "xkb_layout" "pl"
[   103.488] (II) config/udev: Adding input device Integrated Camera (/dev/input/event12)
[   103.488] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
[   103.488] (II) Using input driver 'evdev' for 'Integrated Camera'
[   103.488] (**) Integrated Camera: always reports core events
[   103.488] (**) evdev: Integrated Camera: Device: "/dev/input/event12"
[   103.488] (--) evdev: Integrated Camera: Vendor 0x5986 Product 0x295
[   103.488] (--) evdev: Integrated Camera: Found keys
[   103.488] (II) evdev: Integrated Camera: Configuring as keyboard
[   103.488] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input14/event12"
[   103.488] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 9)
[   103.488] (**) Option "xkb_rules" "evdev"
[   103.488] (**) Option "xkb_model" "pc105"
[   103.488] (**) Option "xkb_layout" "pl"
[   103.489] (II) config/udev: Adding input device A4Tech PS/2+USB Mouse (/dev/input/event13)
[   103.489] (**) A4Tech PS/2+USB Mouse: Applying InputClass "evdev pointer catchall"
[   103.489] (II) Using input driver 'evdev' for 'A4Tech PS/2+USB Mouse'
[   103.489] (**) A4Tech PS/2+USB Mouse: always reports core events
[   103.489] (**) evdev: A4Tech PS/2+USB Mouse: Device: "/dev/input/event13"
[   103.549] (--) evdev: A4Tech PS/2+USB Mouse: Vendor 0x9da Product 0xa
[   103.549] (--) evdev: A4Tech PS/2+USB Mouse: Found 12 mouse buttons
[   103.549] (--) evdev: A4Tech PS/2+USB Mouse: Found scroll wheel(s)
[   103.549] (--) evdev: A4Tech PS/2+USB Mouse: Found relative axes
[   103.549] (--) evdev: A4Tech PS/2+USB Mouse: Found x and y relative axes
[   103.549] (II) evdev: A4Tech PS/2+USB Mouse: Configuring as mouse
[   103.549] (II) evdev: A4Tech PS/2+USB Mouse: Adding scrollwheel support
[   103.549] (**) evdev: A4Tech PS/2+USB Mouse: YAxisMapping: buttons 4 and 5
[   103.549] (**) evdev: A4Tech PS/2+USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   103.549] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:09DA:000A.0001/input/input15/event13"
[   103.549] (II) XINPUT: Adding extended input device "A4Tech PS/2+USB Mouse" (type: MOUSE, id 10)
[   103.549] (II) evdev: A4Tech PS/2+USB Mouse: initialized for relative axes.
[   103.550] (**) A4Tech PS/2+USB Mouse: (accel) keeping acceleration scheme 1
[   103.550] (**) A4Tech PS/2+USB Mouse: (accel) acceleration profile 0
[   103.550] (**) A4Tech PS/2+USB Mouse: (accel) acceleration factor: 2.000
[   103.550] (**) A4Tech PS/2+USB Mouse: (accel) acceleration threshold: 4
[   103.550] (II) config/udev: Adding input device A4Tech PS/2+USB Mouse (/dev/input/mouse0)
[   103.551] (II) No input driver specified, ignoring this device.
[   103.551] (II) This device may have been added with another device file.
[   103.551] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[   103.551] (II) No input driver specified, ignoring this device.
[   103.551] (II) This device may have been added with another device file.
[   103.552] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event9)
[   103.552] (II) No input driver specified, ignoring this device.
[   103.552] (II) This device may have been added with another device file.
[   103.552] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[   103.552] (II) No input driver specified, ignoring this device.
[   103.552] (II) This device may have been added with another device file.
[   103.553] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event8)
[   103.553] (II) No input driver specified, ignoring this device.
[   103.553] (II) This device may have been added with another device file.
[   103.554] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   103.554] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   103.554] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   103.554] (**) AT Translated Set 2 keyboard: always reports core events
[   103.554] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[   103.554] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[   103.554] (--) evdev: AT Translated Set 2 keyboard: Found keys
[   103.554] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[   103.554] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[   103.554] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[   103.554] (**) Option "xkb_rules" "evdev"
[   103.554] (**) Option "xkb_model" "pc105"
[   103.554] (**) Option "xkb_layout" "pl"
[   103.555] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event14)
[   103.555] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[   103.555] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[   103.555] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[   103.555] (II) LoadModule: "synaptics"
[   103.556] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[   103.556] (II) Module synaptics: vendor="X.Org Foundation"
[   103.556]     compiled for 1.16.0.901, module version = 1.8.99
[   103.556]     Module class: X.Org XInput Driver
[   103.556]     ABI class: X.Org XInput driver, version 21.0
[   103.556] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[   103.556] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   103.556] (**) Option "Device" "/dev/input/event14"
[   103.604] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[   103.604] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1184 - 5760 (res 52)
[   103.604] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1022 - 4828 (res 70)
[   103.604] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[   103.604] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[   103.604] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[   103.604] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[   103.604] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   103.604] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   103.668] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input12/event14"
[   103.668] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[   103.668] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[   103.668] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[   103.668] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.034
[   103.668] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[   103.668] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[   103.668] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[   103.668] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[   103.669] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   103.669] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[   103.669] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[   103.670] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[   103.670] (II) No input driver specified, ignoring this device.
[   103.670] (II) This device may have been added with another device file.
[   103.671] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event4)
[   103.671] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[   103.671] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[   103.671] (**) ThinkPad Extra Buttons: always reports core events
[   103.671] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event4"
[   103.671] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
[   103.671] (--) evdev: ThinkPad Extra Buttons: Found keys
[   103.671] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
[   103.671] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input5/event4"
[   103.671] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 13)
[   103.671] (**) Option "xkb_rules" "evdev"
[   103.671] (**) Option "xkb_model" "pc105"
[   103.671] (**) Option "xkb_layout" "pl"
[   103.672] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event6)
[   103.673] (II) No input driver specified, ignoring this device.
[   103.673] (II) This device may have been added with another device file.
[   103.673] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0)
[   103.673] (II) No input driver specified, ignoring this device.
[   103.673] (II) This device may have been added with another device file.
[   135.156] (II) evdev: ThinkPad Extra Buttons: Close
[   135.156] (II) UnloadModule: "evdev"
[   135.156] (II) UnloadModule: "synaptics"
[   135.156] (II) evdev: AT Translated Set 2 keyboard: Close
[   135.156] (II) UnloadModule: "evdev"
[   135.156] (II) evdev: A4Tech PS/2+USB Mouse: Close
[   135.156] (II) UnloadModule: "evdev"
[   135.156] (II) evdev: Integrated Camera: Close
[   135.156] (II) UnloadModule: "evdev"
[   135.156] (II) evdev: Sleep Button: Close
[   135.156] (II) UnloadModule: "evdev"
[   135.156] (II) evdev: Video Bus: Close
[   135.156] (II) UnloadModule: "evdev"
[   135.156] (II) evdev: Power Button: Close
[   135.156] (II) UnloadModule: "evdev"
[   135.886] (EE) Server terminated successfully (0). Closing log file.

Który log LightDM?

Post autor: **marcin1982** » 10 października 2015, 16:41

W tym jest "czysto".

W katalogu /var/log masz katalog lightdm. Pokaż wszystkie pliki jakie tam są.

syngromu88 · Post autor: **syngromu88** » 10 października 2015, 16:53

lightdm.log:

Kod: Zaznacz cały

[+0.06s] DEBUG: Logging to /var/log/lightdm/lightdm.log
[+0.06s] DEBUG: Starting Light Display Manager 1.10.3, UID=0 PID=2100
[+0.06s] DEBUG: Loading configuration dirs from /usr/share/lightdm/lightdm.conf.d
[+0.06s] DEBUG: Loading configuration from /usr/share/lightdm/lightdm.conf.d/01_debian.conf
[+0.06s] DEBUG: Loading configuration dirs from /usr/local/share/lightdm/lightdm.conf.d
[+0.06s] DEBUG: Loading configuration dirs from /etc/xdg/lightdm/lightdm.conf.d
[+0.06s] DEBUG: Loading configuration from /etc/lightdm/lightdm.conf
[+0.06s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager
[+0.06s] DEBUG: Registered seat module xlocal
[+0.06s] DEBUG: Registered seat module xremote
[+0.06s] DEBUG: Registered seat module unity
[+0.06s] DEBUG: Registered seat module surfaceflinger
[+0.07s] DEBUG: Adding default seat
[+0.07s] DEBUG: Seat: Starting
[+0.07s] DEBUG: Seat: Creating greeter session
[+0.53s] DEBUG: Seat: Creating display server of type x
[+0.53s] DEBUG: Could not run plymouth --ping: Failed to execute child process "plymouth" (No such file or directory)
[+0.53s] DEBUG: Using VT 7
[+0.53s] DEBUG: Seat: Starting local X display on VT 7
[+0.53s] DEBUG: DisplayServer x-0: Logging to /var/log/lightdm/x-0.log
[+0.53s] DEBUG: DisplayServer x-0: Writing X server authority to /var/run/lightdm/root/:0
[+0.53s] DEBUG: DisplayServer x-0: Launching X Server
[+0.53s] DEBUG: Launching process 2158: /usr/bin/X :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
[+0.53s] DEBUG: DisplayServer x-0: Waiting for ready signal from X server :0
[+0.53s] DEBUG: Acquired bus name org.freedesktop.DisplayManager
[+0.53s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0
[+0.54s] DEBUG: Loading users from org.freedesktop.Accounts
[+0.54s] DEBUG: User /org/freedesktop/Accounts/User1000 added
[+4.83s] DEBUG: User /org/freedesktop/Accounts/User1000 changed
[+5.71s] DEBUG: Got signal 10 from process 2158
[+5.71s] DEBUG: DisplayServer x-0: Got signal from X server :0
[+5.71s] DEBUG: DisplayServer x-0: Connecting to XServer :0
[+5.73s] DEBUG: Seat: Display server ready, starting session authentication
[+5.73s] DEBUG: Session pid=2465: Started with service 'lightdm-greeter', username 'lightdm'
[+6.01s] DEBUG: Session pid=2465: Authentication complete with return value 0: Success
[+6.01s] DEBUG: Seat: Session authenticated, running command
[+6.01s] DEBUG: Session pid=2465: Running command /usr/sbin/lightdm-gtk-greeter
[+6.01s] DEBUG: Creating shared data directory /var/lib/lightdm/data/lightdm
[+6.01s] DEBUG: Session pid=2465: Logging to /var/log/lightdm/x-0-greeter.log
[+6.34s] DEBUG: Activating VT 7
[+6.34s] DEBUG: Activating login1 session c1
[+8.31s] DEBUG: Session pid=2465: Greeter connected version=1.10.3
[+10.78s] DEBUG: Session pid=2465: Greeter start authentication
[+10.78s] DEBUG: Session pid=2492: Started with service 'lightdm', username '(null)'
[+10.79s] DEBUG: User /org/freedesktop/Accounts/User1000 changed
[+10.96s] DEBUG: Session pid=2492: Got 1 message(s) from PAM
[+10.96s] DEBUG: Session pid=2465: Prompt greeter with 1 message(s)
[+16.50s] DEBUG: Session pid=2465: Greeter start authentication for piotrek
[+16.50s] DEBUG: Session pid=2492: Sending SIGTERM
[+16.50s] DEBUG: Session pid=2874: Started with service 'lightdm', username 'piotrek'
[+16.50s] DEBUG: Session pid=2492: Terminated with signal 15
[+16.50s] DEBUG: Session: Failed during authentication
[+16.50s] DEBUG: Seat: Session stopped
[+16.52s] DEBUG: Session pid=2874: Got 1 message(s) from PAM
[+16.52s] DEBUG: Session pid=2465: Prompt greeter with 1 message(s)
[+22.22s] DEBUG: Session pid=2465: Continue authentication
[+22.31s] DEBUG: Session pid=2874: Authentication complete with return value 0: Success
[+22.31s] DEBUG: Session pid=2465: Authenticate result for user piotrek: Success
[+22.31s] DEBUG: Session pid=2465: User piotrek authorized
[+22.31s] DEBUG: Session pid=2465: Greeter sets language pl_PL.utf8
[+22.35s] DEBUG: Session pid=2465: Greeter requests session lightdm-xsession
[+22.35s] DEBUG: Seat: Stopping greeter; display server will be re-used for user session
[+22.35s] DEBUG: Session pid=2465: Sending SIGTERM
[+22.36s] DEBUG: Session pid=2465: Greeter closed communication channel
[+22.36s] DEBUG: Session pid=2465: Exited with return value 0
[+22.36s] DEBUG: Seat: Session stopped
[+22.36s] DEBUG: Seat: Greeter stopped, running session
[+22.36s] DEBUG: Registering session with bus path /org/freedesktop/DisplayManager/Session0
[+22.36s] DEBUG: Session pid=2874: Running command /etc/X11/Xsession default
[+22.36s] DEBUG: Creating shared data directory /var/lib/lightdm/data/piotrek
[+22.36s] DEBUG: Session pid=2874: Logging to .xsession-errors
[+22.67s] DEBUG: Activating VT 7
[+22.67s] DEBUG: Activating login1 session 1
[+23.88s] DEBUG: User /org/freedesktop/Accounts/User1000 changed
[+24.24s] DEBUG: Session pid=2874: Exited with return value 0
[+24.24s] DEBUG: Seat: Session stopped
[+24.24s] DEBUG: Seat: Stopping display server, no sessions require it
[+24.24s] DEBUG: Sending signal 15 to process 2158
[+25.36s] DEBUG: Process 2158 exited with return value 0
[+25.36s] DEBUG: DisplayServer x-0: X server stopped
[+25.36s] DEBUG: Releasing VT 7
[+25.36s] DEBUG: DisplayServer x-0: Removing X server authority /var/run/lightdm/root/:0
[+25.36s] DEBUG: Seat: Display server stopped
[+25.36s] DEBUG: Seat: Active display server stopped, starting greeter
[+25.36s] DEBUG: Seat: Creating greeter session
[+25.36s] DEBUG: Seat: Creating display server of type x
[+25.36s] DEBUG: Using VT 7
[+25.36s] DEBUG: Seat: Starting local X display on VT 7
[+25.36s] DEBUG: DisplayServer x-0: Logging to /var/log/lightdm/x-0.log
[+25.36s] DEBUG: DisplayServer x-0: Writing X server authority to /var/run/lightdm/root/:0
[+25.36s] DEBUG: DisplayServer x-0: Launching X Server
[+25.36s] DEBUG: Launching process 2917: /usr/bin/X :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
[+25.36s] DEBUG: DisplayServer x-0: Waiting for ready signal from X server :0
[+25.69s] DEBUG: User /org/freedesktop/Accounts/User1000 changed
[+25.70s] DEBUG: Got signal 10 from process 2917
[+25.70s] DEBUG: DisplayServer x-0: Got signal from X server :0
[+25.70s] DEBUG: DisplayServer x-0: Connecting to XServer :0
[+25.70s] DEBUG: Seat: Display server ready, starting session authentication
[+25.70s] DEBUG: Session pid=2925: Started with service 'lightdm-greeter', username 'lightdm'
[+25.72s] DEBUG: Session pid=2925: Authentication complete with return value 0: Success
[+25.72s] DEBUG: Seat: Session authenticated, running command
[+25.72s] DEBUG: Session pid=2925: Running command /usr/sbin/lightdm-gtk-greeter
[+25.72s] DEBUG: Creating shared data directory /var/lib/lightdm/data/lightdm
[+25.72s] DEBUG: Session pid=2925: Logging to /var/log/lightdm/x-0-greeter.log
[+25.73s] DEBUG: Activating VT 7
[+25.73s] DEBUG: Activating login1 session c2
[+25.85s] DEBUG: Session pid=2925: Greeter connected version=1.10.3
[+26.52s] DEBUG: Session pid=2925: Greeter start authentication
[+26.52s] DEBUG: Session pid=2945: Started with service 'lightdm', username '(null)'
[+26.52s] DEBUG: Session pid=2945: Got 1 message(s) from PAM
[+26.52s] DEBUG: Session pid=2925: Prompt greeter with 1 message(s)
[+57.79s] DEBUG: Session pid=2925: Greeter start authentication for piotrek
[+57.79s] DEBUG: Session pid=2945: Sending SIGTERM
[+57.79s] DEBUG: Session pid=3704: Started with service 'lightdm', username 'piotrek'
[+57.79s] DEBUG: Session pid=2945: Terminated with signal 15
[+57.79s] DEBUG: Session: Failed during authentication
[+57.79s] DEBUG: Seat: Session stopped
[+57.80s] DEBUG: Session pid=3704: Got 1 message(s) from PAM
[+57.80s] DEBUG: Session pid=2925: Prompt greeter with 1 message(s)
[+65.63s] DEBUG: Session pid=2925: Greeter start authentication for piotrek
[+65.63s] DEBUG: Session pid=3704: Sending SIGTERM
[+65.64s] DEBUG: Session pid=3705: Started with service 'lightdm', username 'piotrek'
[+65.64s] DEBUG: Session pid=3704: Terminated with signal 15
[+65.64s] DEBUG: Session: Failed during authentication
[+65.64s] DEBUG: Seat: Session stopped
[+65.65s] DEBUG: Session pid=3705: Got 1 message(s) from PAM
[+65.65s] DEBUG: Session pid=2925: Prompt greeter with 1 message(s)
[+65.69s] DEBUG: Session pid=2925: Continue authentication
[+67.64s] DEBUG: Session pid=3705: Authentication complete with return value 7: Authentication failure
[+67.64s] DEBUG: Session pid=2925: Authenticate result for user piotrek: Authentication failure
[+67.64s] DEBUG: Session pid=3705: Exited with return value 1
[+67.64s] DEBUG: Seat: Session stopped
[+67.69s] DEBUG: Session pid=2925: Greeter start authentication for piotrek
[+67.69s] DEBUG: Session pid=3706: Started with service 'lightdm', username 'piotrek'
[+67.70s] DEBUG: Session pid=3706: Got 1 message(s) from PAM
[+67.70s] DEBUG: Session pid=2925: Prompt greeter with 1 message(s)
[+79.20s] DEBUG: Session pid=2925: Continue authentication
[+79.29s] DEBUG: Session pid=3706: Authentication complete with return value 0: Success
[+79.29s] DEBUG: Session pid=2925: Authenticate result for user piotrek: Success
[+79.29s] DEBUG: Session pid=2925: User piotrek authorized
[+79.29s] DEBUG: Session pid=2925: Greeter sets language pl_PL.utf8
[+79.33s] DEBUG: Session pid=2925: Greeter requests session lxqt
[+79.40s] DEBUG: Writing /home/piotrek/.dmrc
[+79.52s] DEBUG: Seat: Stopping greeter; display server will be re-used for user session
[+79.52s] DEBUG: Session pid=2925: Sending SIGTERM
[+79.52s] DEBUG: User /org/freedesktop/Accounts/User1000 changed
[+79.54s] DEBUG: Session pid=2925: Greeter closed communication channel
[+79.54s] DEBUG: Session pid=2925: Exited with return value 0
[+79.54s] DEBUG: Seat: Session stopped
[+79.54s] DEBUG: Seat: Greeter stopped, running session
[+79.54s] DEBUG: Registering session with bus path /org/freedesktop/DisplayManager/Session1
[+79.55s] DEBUG: Session pid=3706: Running command /etc/X11/Xsession startlxqt
[+79.55s] DEBUG: Creating shared data directory /var/lib/lightdm/data/piotrek
[+79.55s] DEBUG: Session pid=3706: Logging to .xsession-errors
[+79.57s] DEBUG: Activating VT 7
[+79.57s] DEBUG: Activating login1 session 2
[+79.77s] DEBUG: Session pid=3706: Exited with return value 0
[+79.77s] DEBUG: Seat: Session stopped
[+79.77s] DEBUG: Seat: Stopping display server, no sessions require it
[+79.77s] DEBUG: Sending signal 15 to process 2917
[+80.89s] DEBUG: Process 2917 exited with return value 0
[+80.89s] DEBUG: DisplayServer x-0: X server stopped
[+80.89s] DEBUG: Releasing VT 7
[+80.89s] DEBUG: DisplayServer x-0: Removing X server authority /var/run/lightdm/root/:0
[+80.89s] DEBUG: Seat: Display server stopped
[+80.89s] DEBUG: Seat: Active display server stopped, starting greeter
[+80.89s] DEBUG: Seat: Creating greeter session
[+80.89s] DEBUG: Seat: Creating display server of type x
[+80.89s] DEBUG: Using VT 7
[+80.89s] DEBUG: Seat: Starting local X display on VT 7
[+80.89s] DEBUG: DisplayServer x-0: Logging to /var/log/lightdm/x-0.log
[+80.89s] DEBUG: DisplayServer x-0: Writing X server authority to /var/run/lightdm/root/:0
[+80.89s] DEBUG: DisplayServer x-0: Launching X Server
[+80.89s] DEBUG: Launching process 4125: /usr/bin/X :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
[+80.89s] DEBUG: DisplayServer x-0: Waiting for ready signal from X server :0
[+81.06s] DEBUG: User /org/freedesktop/Accounts/User1000 changed
[+81.22s] DEBUG: Got signal 10 from process 4125
[+81.22s] DEBUG: DisplayServer x-0: Got signal from X server :0
[+81.22s] DEBUG: DisplayServer x-0: Connecting to XServer :0
[+81.22s] DEBUG: Seat: Display server ready, starting session authentication
[+81.22s] DEBUG: Session pid=4133: Started with service 'lightdm-greeter', username 'lightdm'
[+81.24s] DEBUG: Session pid=4133: Authentication complete with return value 0: Success
[+81.24s] DEBUG: Seat: Session authenticated, running command
[+81.24s] DEBUG: Session pid=4133: Running command /usr/sbin/lightdm-gtk-greeter
[+81.24s] DEBUG: Creating shared data directory /var/lib/lightdm/data/lightdm
[+81.24s] DEBUG: Session pid=4133: Logging to /var/log/lightdm/x-0-greeter.log
[+81.26s] DEBUG: Activating VT 7
[+81.26s] DEBUG: Activating login1 session c3
[+81.34s] DEBUG: Session pid=4133: Greeter connected version=1.10.3
[+82.01s] DEBUG: Session pid=4133: Greeter start authentication
[+82.01s] DEBUG: Session pid=4153: Started with service 'lightdm', username '(null)'
[+82.02s] DEBUG: Session pid=4153: Got 1 message(s) from PAM
[+82.02s] DEBUG: Session pid=4133: Prompt greeter with 1 message(s)
[+112.49s] DEBUG: Session pid=4133: Terminated with signal 1
[+112.49s] DEBUG: Seat: Session stopped
[+112.49s] DEBUG: Seat: Stopping; failed to start a greeter
[+112.49s] DEBUG: Seat: Stopping
[+112.49s] DEBUG: Seat: Stopping display server
[+112.49s] DEBUG: Sending signal 15 to process 4125
[+112.49s] DEBUG: Seat: Stopping session
[+112.49s] DEBUG: Session pid=4153: Sending SIGTERM
[+112.50s] DEBUG: Session pid=4153: Terminated with signal 15
[+112.50s] DEBUG: Session: Failed during authentication
[+112.50s] DEBUG: Seat: Session stopped
[+112.50s] DEBUG: Got signal 15 from process 1
[+112.50s] DEBUG: Caught Terminated signal, shutting down
[+112.50s] DEBUG: Stopping display manager

x-0.log:

Kod: Zaznacz cały

X.Org X Server 1.16.4
Release Date: 2014-12-20
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.2.0-4-amd64 i686 Debian
Current Operating System: Linux debian 3.16.0-4-686-pae #1 SMP Debian 3.16.7-ckt11-1+deb8u4 (2015-09-19) i686
Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-686-pae root=UUID=1eee5066-de6a-4e25-98f2-b136754e5860 ro quiet
Build Date: 11 February 2015  01:14:26AM
xorg-server 2:1.16.4-1 (http://www.debian.org/support) 
Current version of pixman: 0.32.6
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Oct 10 15:38:32 2015
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
(EE) Server terminated successfully (0). Closing log file.

x-0-greeter.log:

Kod: Zaznacz cały

(lightdm-gtk-greeter:4135): Gtk-CRITICAL **: gtk_container_foreach: assertion 'GTK_IS_CONTAINER (container)' failed

(lightdm-gtk-greeter:4135): Gtk-CRITICAL **: gtk_container_foreach: assertion 'GTK_IS_CONTAINER (container)' failed

(lightdm-gtk-greeter:4135): Gtk-CRITICAL **: gtk_container_foreach: assertion 'GTK_IS_CONTAINER (container)' failed
Gtk-Message: GtkDialog mapped without a transient parent. This is discouraged.

Post autor: **marcin1982** » 10 października 2015, 17:14

Sprawdź czy na pewno w pliku lightdm.conf jest ustawione autologowanie, bo to dziwnie wygląda:

Kod: Zaznacz cały


[+82.01s] DEBUG: Session pid=4153: Started with service 'lightdm', username '(null)' [+82.02s] DEBUG: Session pid=4153: Got 1 message(s) from PAM [+82.02s] DEBUG: Session pid=4133: Prompt greeter with 1 message(s) [+112.49s] DEBUG: Session pid=4133: Terminated with signal 1 [+112.49s] DEBUG: Seat: Session stopped [+112.49s] DEBUG: Seat: Stopping; failed to start a greeter [+112.49s] DEBUG: Seat: Stopping [+112.49s] DEBUG: Seat: Stopping display server [+112.49s] DEBUG: Sending signal 15 to process 4125 [+112.49s] DEBUG: Seat: Stopping session [+112.49s] DEBUG: Session pid=4153: Sending SIGTERM [+112.50s] DEBUG: Session pid=4153: Terminated with signal 15 [+112.50s] DEBUG: Session: Failed during authentication [+112.50s] DEBUG: Seat: Session stopped [+112.50s] DEBUG: Got signal 15 from process 1 [+112.50s] DEBUG: Caught Terminated signal, shutting down [+112.50s] DEBUG: Stopping display manager

Co było dokładnie aktualizowane?

Przejrzyj od końca plik /var/log/apt/history.log . Odnajdź tą pechową aktualizację i wstaw na forum.

Sprawdź jeszcze tak - może to powie coś więcej:

Kod: Zaznacz cały

systemctl --failed

Tu jeszcze zajrzyj:
https://wiki.debian.org/systemd#Debugging .

syngromu88 · Post autor: **syngromu88** » 10 października 2015, 19:16

Autologowanie miałem chwilowo wyłączone bo próbowałem odinstalować i zainstalować ponownie lightdm.
Co to za aktualizacja nie wiem, nie ma w logach być może ze względu na skrypt który używam do aktualizacji.
Zastanawiam się czy przeinstalowanie środowiska graficznego może pomóc.

Post autor: **Yampress** » 10 października 2015, 23:00

Spróbuj się zalogować na nowo utworzonym czystym użytkowniku. Jeśli to samo to raczej aktualizacja paczek z poza repo debiana rozwaliła Ci system. I zabawa z managerami logowania nic tu nie zmieni.