Mam problem z wyświetleniem obrazu po HDMI. Mój laptop to: Dell XPS 15 l502x, który posiada 2 karty graficzne (zintegrowaną oraz dedykowaną). Problem polega na tym, że po podłączeniu do portu HDMI monitora xrandr nie wykrywa go stąd nawet w nvidia-settings nie ma drugiego monitora. Na co dzień korzystam z bumblebee w celu przełączania się z karty zintegrowanej na kartę od nvidii. Próbowałem edytować pliki od bumblebee według tego: https://github.com/Bumblebee-Project/Bu ... itor-setup jednakże to nie pomogło. Proszę o pomoc bo xorg jest dla mnie czarną magią a chciałbym mieć możliwość pracy na 2 monitorach.
Wynik polecenia: lspci
Kod: Zaznacz cały
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5)
00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5)
00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5)
00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation HM67 Express Chipset Family LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05)
01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 540M] (rev a1)
03:00.0 Network controller: Intel Corporation Centrino Wireless-N 1030 [Rainbow Peak] (rev 34)
04:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04)
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)Kod: Zaznacz cały
Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192LVDS1 connected primary 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 193mm
1366x768 60.01*+
1360x768 59.80 59.96
1024x768 60.00
800x600 60.32 56.25
640x480 59.94
VGA1 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
DP1 disconnected (normal left inverted right x axis y axis)Kod: Zaznacz cały
Linux sebek 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt4-3 (2015-02-03) x86_64 GNU/LinuxKod: Zaznacz cały
[ 19.474]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[ 19.474] X Protocol Version 11, Revision 0
[ 19.474] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[ 19.474] Current Operating System: Linux sebek 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt4-3 (2015-02-03) x86_64
[ 19.474] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=7ca2dbb9-a296-4d3a-b290-ecc13ec7cbd0 ro quiet
[ 19.474] Build Date: 11 February 2015 12:32:02AM
[ 19.474] xorg-server 2:1.16.4-1 ([URL]http://www.debian.org/support[/URL])
[ 19.474] Current version of pixman: 0.32.6
[ 19.474] Before reporting problems, check [URL]http://wiki.x.org[/URL]
to make sure that you have the latest version.
[ 19.474] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 19.475] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 7 13:10:38 2015
[ 19.523] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 19.617] (==) No Layout section. Using the first Screen section.
[ 19.618] (==) No screen section available. Using defaults.
[ 19.618] (**) |-->Screen "Default Screen Section" (0)
[ 19.618] (**) | |-->Monitor "<default monitor>"
[ 19.782] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 19.782] (==) Automatically adding devices
[ 19.782] (==) Automatically enabling devices
[ 19.782] (==) Automatically adding GPU devices
[ 19.819] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 19.819] Entry deleted from font path.
[ 19.927] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 19.927] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 19.927] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 19.964] (II) Loader magic: 0x7fb1ff46dd80
[ 19.964] (II) Module ABI versions:
[ 19.964] X.Org ANSI C Emulation: 0.4
[ 19.964] X.Org Video Driver: 18.0
[ 19.964] X.Org XInput driver : 21.0
[ 19.964] X.Org Server Extension : 8.0
[ 19.965] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 19.967] (--) PCI:*(0:0:2:0) 8086:0116:1028:050e rev 9, Mem @ 0xf1400000/4194304, 0xe0000000/268435456, I/O @ 0x00004000/64
[ 19.967] (--) PCI: (0:1:0:0) 10de:0df4:1028:050e rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[ 20.016] (II) LoadModule: "glx"
[ 20.047] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 20.504] (II) Module glx: vendor="X.Org Foundation"
[ 20.504] compiled for 1.16.4, module version = 1.0.0
[ 20.504] ABI class: X.Org Server Extension, version 8.0
[ 20.504] (==) AIGLX enabled
[ 20.504] (==) Matched intel as autoconfigured driver 0
[ 20.504] (==) Matched intel as autoconfigured driver 1
[ 20.504] (==) Matched modesetting as autoconfigured driver 2
[ 20.504] (==) Matched fbdev as autoconfigured driver 3
[ 20.504] (==) Matched vesa as autoconfigured driver 4
[ 20.504] (==) Assigned the driver to the xf86ConfigLayout
[ 20.504] (II) LoadModule: "intel"
[ 20.504] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 20.625] (II) Module intel: vendor="X.Org Foundation"
[ 20.625] compiled for 1.15.99.904, module version = 2.21.15
[ 20.625] Module class: X.Org Video Driver
[ 20.625] ABI class: X.Org Video Driver, version 18.0
[ 20.625] (II) LoadModule: "modesetting"
[ 20.625] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 20.646] (II) Module modesetting: vendor="X.Org Foundation"
[ 20.646] compiled for 1.15.99.904, module version = 0.9.0
[ 20.646] Module class: X.Org Video Driver
[ 20.646] ABI class: X.Org Video Driver, version 18.0
[ 20.646] (II) LoadModule: "fbdev"
[ 20.646] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 20.685] (II) Module fbdev: vendor="X.Org Foundation"
[ 20.685] compiled for 1.15.99.904, module version = 0.4.4
[ 20.685] Module class: X.Org Video Driver
[ 20.685] ABI class: X.Org Video Driver, version 18.0
[ 20.685] (II) LoadModule: "vesa"
[ 20.685] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 20.743] (II) Module vesa: vendor="X.Org Foundation"
[ 20.743] compiled for 1.15.99.904, module version = 2.3.3
[ 20.743] Module class: X.Org Video Driver
[ 20.743] ABI class: X.Org Video Driver, version 18.0
[ 20.743] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[ 20.745] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 20.745] (II) FBDEV: driver for framebuffer: fbdev
[ 20.745] (II) VESA: driver for VESA chipsets: vesa
[ 20.745] (++) using VT number 7
[ 20.752] (WW) Falling back to old probe method for modesetting
[ 20.753] (WW) Falling back to old probe method for fbdev
[ 20.753] (II) Loading sub module "fbdevhw"
[ 20.753] (II) LoadModule: "fbdevhw"
[ 20.753] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 20.780] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 20.780] compiled for 1.16.4, module version = 0.0.2
[ 20.780] ABI class: X.Org Video Driver, version 18.0
[ 20.780] (WW) Falling back to old probe method for vesa
[ 20.781] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 20.781] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 20.781] (==) intel(0): RGB weight 888
[ 20.781] (==) intel(0): Default visual is TrueColor
[ 20.781] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000
[ 20.781] (**) intel(0): Relaxed fencing enabled
[ 20.781] (**) intel(0): Wait on SwapBuffers? enabled
[ 20.781] (**) intel(0): Triple buffering? enabled
[ 20.781] (**) intel(0): Framebuffer tiled
[ 20.781] (**) intel(0): Pixmaps tiled
[ 20.781] (**) intel(0): 3D buffers tiled
[ 20.781] (**) intel(0): SwapBuffers wait enabled
[ 20.781] (==) intel(0): video overlay key set to 0x101fe
[ 20.781] (II) intel(0): Output LVDS1 has no monitor section
[ 20.781] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 20.812] (II) intel(0): Output VGA1 has no monitor section
[ 20.812] (II) intel(0): Output HDMI1 has no monitor section
[ 20.812] (II) intel(0): Output DP1 has no monitor section
[ 20.812] (II) intel(0): EDID for output LVDS1
[ 20.812] (II) intel(0): Manufacturer: AUO Model: 22ec Serial#: 0
[ 20.812] (II) intel(0): Year: 2009 Week: 1
[ 20.812] (II) intel(0): EDID Version: 1.3
[ 20.812] (II) intel(0): Digital Display Input
[ 20.812] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 20.812] (II) intel(0): Gamma: 2.20
[ 20.812] (II) intel(0): No DPMS capabilities specified
[ 20.812] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 20.812] (II) intel(0): First detailed timing is preferred mode
[ 20.812] (II) intel(0): redX: 0.620 redY: 0.340 greenX: 0.330 greenY: 0.570
[ 20.812] (II) intel(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 20.812] (II) intel(0): Manufacturer's mask: 0
[ 20.812] (II) intel(0): Supported detailed timing:
[ 20.812] (II) intel(0): clock: 65.1 MHz Image Size: 344 x 193 mm
[ 20.812] (II) intel(0): h_active: 1366 h_sync: 1382 h_sync_end 1390 h_blank_end 1398 h_border: 0
[ 20.812] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 775 v_blanking: 776 v_border: 0
[ 20.812] (II) intel(0): Supported detailed timing:
[ 20.812] (II) intel(0): clock: 65.1 MHz Image Size: 344 x 193 mm
[ 20.812] (II) intel(0): h_active: 1366 h_sync: 1382 h_sync_end 1390 h_blank_end 1398 h_border: 0
[ 20.812] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 775 v_blanking: 776 v_border: 0
[ 20.812] (II) intel(0): 1JC2N�B156XW2
[ 20.812] (II) intel(0): Unknown vendor-specific block 0
[ 20.812] (II) intel(0): EDID (in hex):
[ 20.812] (II) intel(0): 00ffffffffffff0006afec2200000000
[ 20.812] (II) intel(0): 01130103902213780ac8959e57549226
[ 20.812] (II) intel(0): 0f505400000001010101010101010101
[ 20.812] (II) intel(0): 0101010101016e195620500008301008
[ 20.812] (II) intel(0): 340058c11000001a6e19562050000830
[ 20.812] (II) intel(0): 1008340058c11000001a000000fe0031
[ 20.812] (II) intel(0): 4a43324e804231353658573200000000
[ 20.812] (II) intel(0): 00000000000000000001010a202000d4
[ 20.813] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 20.813] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 20.813] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 20.813] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 20.813] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 20.813] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 20.813] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 20.813] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 20.813] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 20.813] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 20.813] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 20.813] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 20.813] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 20.813] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 20.813] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 20.813] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 20.813] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 20.813] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 20.813] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 20.813] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 20.813] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 20.813] (II) intel(0): Printing probed modes for output LVDS1
[ 20.813] (II) intel(0): Modeline "1366x768"x60.0 65.10 1366 1382 1390 1398 768 771 775 776 +hsync -vsync (46.6 kHz eP)
[ 20.813] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d)
[ 20.813] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d)
[ 20.813] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 20.813] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 20.813] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 20.813] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 20.844] (II) intel(0): EDID for output VGA1
[ 20.844] (II) intel(0): EDID for output HDMI1
[ 20.844] (II) intel(0): EDID for output DP1
[ 20.844] (II) intel(0): Output LVDS1 connected
[ 20.844] (II) intel(0): Output VGA1 disconnected
[ 20.844] (II) intel(0): Output HDMI1 disconnected
[ 20.844] (II) intel(0): Output DP1 disconnected
[ 20.844] (II) intel(0): Using exact sizes for initial modes
[ 20.844] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 20.844] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 20.844] (II) intel(0): Kernel page flipping support detected, enabling
[ 20.844] (==) intel(0): DPI set to (96, 96)
[ 20.844] (II) Loading sub module "fb"
[ 20.844] (II) LoadModule: "fb"
[ 20.844] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 21.051] (II) Module fb: vendor="X.Org Foundation"
[ 21.051] compiled for 1.16.4, module version = 1.0.0
[ 21.051] ABI class: X.Org ANSI C Emulation, version 0.4
[ 21.051] (II) Loading sub module "dri2"
[ 21.051] (II) LoadModule: "dri2"
[ 21.051] (II) Module "dri2" already built-in
[ 21.051] (II) UnloadModule: "modesetting"
[ 21.051] (II) Unloading modesetting
[ 21.051] (II) UnloadModule: "fbdev"
[ 21.051] (II) Unloading fbdev
[ 21.051] (II) UnloadSubModule: "fbdevhw"
[ 21.051] (II) Unloading fbdevhw
[ 21.051] (II) UnloadModule: "vesa"
[ 21.051] (II) Unloading vesa
[ 21.051] (==) Depth 24 pixmap format is 32 bpp
[ 21.060] (II) intel(0): [DRI2] Setup complete
[ 21.060] (II) intel(0): [DRI2] DRI driver: i965
[ 21.061] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 21.087] (II) UXA(0): Driver registered support for the following operations:
[ 21.087] (II) solid
[ 21.087] (II) copy
[ 21.087] (II) composite (RENDER acceleration)
[ 21.087] (II) put_image
[ 21.087] (II) get_image
[ 21.087] (==) intel(0): Backing store enabled
[ 21.087] (==) intel(0): Silken mouse enabled
[ 21.104] (II) intel(0): Initializing HW Cursor
[ 21.105] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 21.143] (==) intel(0): DPMS enabled
[ 21.143] (==) intel(0): Intel XvMC decoder enabled
[ 21.143] (II) intel(0): Set up textured video
[ 21.143] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 21.143] (II) intel(0): direct rendering: DRI2 Enabled
[ 21.144] (==) intel(0): hotplug detection: "enabled"
[ 21.160] (--) RandR disabled
[ 21.168] (II) SELinux: Disabled on system
[ 21.747] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 21.747] (II) AIGLX: enabled GLX_ARB_create_context
[ 21.747] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 21.747] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 21.747] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 21.747] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 21.747] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 21.747] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 21.747] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 21.747] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 21.747] (II) AIGLX: Loaded and initialized i965
[ 21.747] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 21.748] (II) intel(0): Setting screen physical size to 361 x 203
[ 22.221] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 22.221] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 22.221] (II) LoadModule: "evdev"
[ 22.222] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 22.252] (II) Module evdev: vendor="X.Org Foundation"
[ 22.253] compiled for 1.16.0, module version = 2.9.0
[ 22.253] Module class: X.Org XInput Driver
[ 22.253] ABI class: X.Org XInput driver, version 21.0
[ 22.253] (II) Using input driver 'evdev' for 'Power Button'
[ 22.253] (**) Power Button: always reports core events
[ 22.253] (**) evdev: Power Button: Device: "/dev/input/event6"
[ 22.253] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 22.253] (--) evdev: Power Button: Found keys
[ 22.253] (II) evdev: Power Button: Configuring as keyboard
[ 22.253] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event6"
[ 22.253] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 22.253] (**) Option "xkb_rules" "evdev"
[ 22.253] (**) Option "xkb_model" "pc105"
[ 22.253] (**) Option "xkb_layout" "pl"
[ 22.299] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[ 22.300] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 22.300] (II) Using input driver 'evdev' for 'Video Bus'
[ 22.300] (**) Video Bus: always reports core events
[ 22.300] (**) evdev: Video Bus: Device: "/dev/input/event11"
[ 22.300] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 22.300] (--) evdev: Video Bus: Found keys
[ 22.300] (II) evdev: Video Bus: Configuring as keyboard
[ 22.300] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input12/event11"
[ 22.300] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 22.300] (**) Option "xkb_rules" "evdev"
[ 22.300] (**) Option "xkb_model" "pc105"
[ 22.300] (**) Option "xkb_layout" "pl"
[ 22.300] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[ 22.300] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 22.300] (II) Using input driver 'evdev' for 'Video Bus'
[ 22.300] (**) Video Bus: always reports core events
[ 22.300] (**) evdev: Video Bus: Device: "/dev/input/event10"
[ 22.300] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 22.301] (--) evdev: Video Bus: Found keys
[ 22.301] (II) evdev: Video Bus: Configuring as keyboard
[ 22.301] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:32/LNXVIDEO:00/input/input11/event10"
[ 22.301] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 22.301] (**) Option "xkb_rules" "evdev"
[ 22.301] (**) Option "xkb_model" "pc105"
[ 22.301] (**) Option "xkb_layout" "pl"
[ 22.301] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 22.301] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 22.301] (II) Using input driver 'evdev' for 'Power Button'
[ 22.301] (**) Power Button: always reports core events
[ 22.301] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 22.301] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 22.301] (--) evdev: Power Button: Found keys
[ 22.301] (II) evdev: Power Button: Configuring as keyboard
[ 22.301] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event3"
[ 22.301] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 22.301] (**) Option "xkb_rules" "evdev"
[ 22.301] (**) Option "xkb_model" "pc105"
[ 22.301] (**) Option "xkb_layout" "pl"
[ 22.302] (II) config/udev: Adding input device Lid Switch (/dev/input/event5)
[ 22.302] (II) No input driver specified, ignoring this device.
[ 22.302] (II) This device may have been added with another device file.
[ 22.302] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 22.302] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 22.302] (II) Using input driver 'evdev' for 'Sleep Button'
[ 22.302] (**) Sleep Button: always reports core events
[ 22.302] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[ 22.302] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 22.302] (--) evdev: Sleep Button: Found keys
[ 22.302] (II) evdev: Sleep Button: Configuring as keyboard
[ 22.302] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5/event4"
[ 22.302] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 22.302] (**) Option "xkb_rules" "evdev"
[ 22.302] (**) Option "xkb_model" "pc105"
[ 22.303] (**) Option "xkb_layout" "pl"
[ 22.303] (II) config/udev: Adding input device Laptop_Integrated_Webcam_2HDM (/dev/input/event12)
[ 22.303] (**) Laptop_Integrated_Webcam_2HDM: Applying InputClass "evdev keyboard catchall"
[ 22.303] (II) Using input driver 'evdev' for 'Laptop_Integrated_Webcam_2HDM'
[ 22.303] (**) Laptop_Integrated_Webcam_2HDM: always reports core events
[ 22.303] (**) evdev: Laptop_Integrated_Webcam_2HDM: Device: "/dev/input/event12"
[ 22.303] (--) evdev: Laptop_Integrated_Webcam_2HDM: Vendor 0x408 Product 0x2fb1
[ 22.304] (--) evdev: Laptop_Integrated_Webcam_2HDM: Found keys
[ 22.304] (II) evdev: Laptop_Integrated_Webcam_2HDM: Configuring as keyboard
[ 22.304] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/input/input14/event12"
[ 22.304] (II) XINPUT: Adding extended input device "Laptop_Integrated_Webcam_2HDM" (type: KEYBOARD, id 11)
[ 22.304] (**) Option "xkb_rules" "evdev"
[ 22.304] (**) Option "xkb_model" "pc105"
[ 22.304] (**) Option "xkb_layout" "pl"
[ 22.304] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event13)
[ 22.304] (II) No input driver specified, ignoring this device.
[ 22.304] (II) This device may have been added with another device file.
[ 22.304] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event14)
[ 22.305] (II) No input driver specified, ignoring this device.
[ 22.305] (II) This device may have been added with another device file.
[ 22.305] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event15)
[ 22.305] (II) No input driver specified, ignoring this device.
[ 22.305] (II) This device may have been added with another device file.
[ 22.305] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event16)
[ 22.305] (II) No input driver specified, ignoring this device.
[ 22.305] (II) This device may have been added with another device file.
[ 22.305] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event17)
[ 22.305] (II) No input driver specified, ignoring this device.
[ 22.305] (II) This device may have been added with another device file.
[ 22.306] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/event1)
[ 22.306] (**) A4TECH USB Device: Applying InputClass "evdev keyboard catchall"
[ 22.306] (II) Using input driver 'evdev' for 'A4TECH USB Device'
[ 22.306] (**) A4TECH USB Device: always reports core events
[ 22.306] (**) evdev: A4TECH USB Device: Device: "/dev/input/event1"
[ 22.306] (--) evdev: A4TECH USB Device: Vendor 0x9da Product 0x54f
[ 22.306] (--) evdev: A4TECH USB Device: Found 1 mouse buttons
[ 22.306] (--) evdev: A4TECH USB Device: Found scroll wheel(s)
[ 22.306] (--) evdev: A4TECH USB Device: Found relative axes
[ 22.306] (--) evdev: A4TECH USB Device: Found absolute axes
[ 22.306] (--) evdev: A4TECH USB Device: Found absolute multitouch axes
[ 22.306] (--) evdev: A4TECH USB Device: Found x and y absolute axes
[ 22.306] (--) evdev: A4TECH USB Device: Found keys
[ 22.306] (II) evdev: A4TECH USB Device: Forcing relative x/y axes to exist.
[ 22.306] (II) evdev: A4TECH USB Device: Configuring as mouse
[ 22.306] (II) evdev: A4TECH USB Device: Configuring as keyboard
[ 22.306] (II) evdev: A4TECH USB Device: Adding scrollwheel support
[ 22.306] (**) evdev: A4TECH USB Device: YAxisMapping: buttons 4 and 5
[ 22.306] (**) evdev: A4TECH USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 22.306] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb1/1-2/1-2:1.0/0003:09DA:054F.0001/input/input2/event1"
[ 22.306] (II) XINPUT: Adding extended input device "A4TECH USB Device" (type: KEYBOARD, id 12)
[ 22.306] (**) Option "xkb_rules" "evdev"
[ 22.306] (**) Option "xkb_model" "pc105"
[ 22.306] (**) Option "xkb_layout" "pl"
[ 22.307] (II) evdev: A4TECH USB Device: initialized for relative axes.
[ 22.307] (WW) evdev: A4TECH USB Device: ignoring absolute axes.
[ 22.307] (**) A4TECH USB Device: (accel) keeping acceleration scheme 1
[ 22.307] (**) A4TECH USB Device: (accel) acceleration profile 0
[ 22.307] (**) A4TECH USB Device: (accel) acceleration factor: 2.000
[ 22.307] (**) A4TECH USB Device: (accel) acceleration threshold: 4
[ 22.307] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/js0)
[ 22.307] (II) No input driver specified, ignoring this device.
[ 22.307] (II) This device may have been added with another device file.
[ 22.307] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/event2)
[ 22.308] (**) A4TECH USB Device: Applying InputClass "evdev pointer catchall"
[ 22.308] (II) Using input driver 'evdev' for 'A4TECH USB Device'
[ 22.308] (**) A4TECH USB Device: always reports core events
[ 22.308] (**) evdev: A4TECH USB Device: Device: "/dev/input/event2"
[ 22.308] (--) evdev: A4TECH USB Device: Vendor 0x9da Product 0x54f
[ 22.308] (--) evdev: A4TECH USB Device: Found 20 mouse buttons
[ 22.308] (--) evdev: A4TECH USB Device: Found scroll wheel(s)
[ 22.308] (--) evdev: A4TECH USB Device: Found relative axes
[ 22.308] (--) evdev: A4TECH USB Device: Found x and y relative axes
[ 22.308] (II) evdev: A4TECH USB Device: Configuring as mouse
[ 22.308] (II) evdev: A4TECH USB Device: Adding scrollwheel support
[ 22.308] (**) evdev: A4TECH USB Device: YAxisMapping: buttons 4 and 5
[ 22.308] (**) evdev: A4TECH USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 22.308] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.3/0000:04:00.0/usb1/1-2/1-2:1.1/0003:09DA:054F.0002/input/input3/event2"
[ 22.308] (II) XINPUT: Adding extended input device "A4TECH USB Device" (type: MOUSE, id 13)
[ 22.308] (II) evdev: A4TECH USB Device: initialized for relative axes.
[ 22.308] (**) A4TECH USB Device: (accel) keeping acceleration scheme 1
[ 22.308] (**) A4TECH USB Device: (accel) acceleration profile 0
[ 22.308] (**) A4TECH USB Device: (accel) acceleration factor: 2.000
[ 22.308] (**) A4TECH USB Device: (accel) acceleration threshold: 4
[ 22.308] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/mouse0)
[ 22.308] (II) No input driver specified, ignoring this device.
[ 22.308] (II) This device may have been added with another device file.
[ 22.309] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 22.309] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 22.309] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 22.309] (**) AT Translated Set 2 keyboard: always reports core events
[ 22.309] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 22.309] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 22.309] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 22.309] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 22.309] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 22.309] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 22.309] (**) Option "xkb_rules" "evdev"
[ 22.309] (**) Option "xkb_model" "pc105"
[ 22.309] (**) Option "xkb_layout" "pl"
[ 22.309] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[ 22.309] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 22.309] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 22.309] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 22.309] (II) LoadModule: "synaptics"
[ 22.310] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 22.325] (II) Module synaptics: vendor="X.Org Foundation"
[ 22.325] compiled for 1.16.0.901, module version = 1.8.99
[ 22.325] Module class: X.Org XInput Driver
[ 22.325] ABI class: X.Org XInput driver, version 21.0
[ 22.325] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 22.325] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 22.325] (**) Option "Device" "/dev/input/event9"
[ 22.380] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 22.380] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5398 (res 42)
[ 22.380] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4728 (res 70)
[ 22.380] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 22.380] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 22.380] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 22.380] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 22.380] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 22.380] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 22.436] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
[ 22.436] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
[ 22.436] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 22.436] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 22.436] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.039
[ 22.436] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 22.437] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 22.437] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 22.437] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 22.437] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 22.437] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 22.437] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 22.438] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 22.438] (II) No input driver specified, ignoring this device.
[ 22.438] (II) This device may have been added with another device file.
[ 22.439] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event8)
[ 22.439] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 22.439] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 22.439] (**) Dell WMI hotkeys: always reports core events
[ 22.439] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event8"
[ 22.439] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
[ 22.439] (--) evdev: Dell WMI hotkeys: Found keys
[ 22.439] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
[ 22.439] (**) Option "config_info" "udev:/sys/devices/virtual/input/input10/event8"
[ 22.439] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 16)
[ 22.439] (**) Option "xkb_rules" "evdev"
[ 22.440] (**) Option "xkb_model" "pc105"
[ 22.440] (**) Option "xkb_layout" "pl"
[ 29.172] (II) intel(0): EDID vendor "AUO", prod id 8940
[ 29.172] (II) intel(0): Printing DDC gathered Modelines:
[ 29.172] (II) intel(0): Modeline "1366x768"x0.0 65.10 1366 1382 1390 1398 768 771 775 776 +hsync -vsync (46.6 kHz eP)
[ 34.852] (II) intel(0): EDID vendor "AUO", prod id 8940
[ 34.852] (II) intel(0): Printing DDC gathered Modelines:
[ 34.852] (II) intel(0): Modeline "1366x768"x0.0 65.10 1366 1382 1390 1398 768 771 775 776 +hsync -vsync (46.6 kHz eP)
[ 44.781] (II) intel(0): EDID vendor "AUO", prod id 8940
[ 44.781] (II) intel(0): Printing DDC gathered Modelines:
[ 44.781] (II) intel(0): Modeline "1366x768"x0.0 65.10 1366 1382 1390 1398 768 771 775 776 +hsync -vsync (46.6 kHz eP)
[ 50.449] (II) intel(0): EDID vendor "AUO", prod id 8940
[ 50.449] (II) intel(0): Printing DDC gathered Modelines:
[ 50.450] (II) intel(0): Modeline "1366x768"x0.0 65.10 1366 1382 1390 1398 768 771 775 776 +hsync -vsync (46.6 kHz eP)
[ 64.303] (II) intel(0): EDID vendor "AUO", prod id 8940
[ 64.303] (II) intel(0): Printing DDC gathered Modelines:
[ 64.303] (II) intel(0): Modeline "1366x768"x0.0 65.10 1366 1382 1390 1398 768 771 775 776 +hsync -vsync (46.6 kHz eP)
[ 68.513] removing GPU device /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card1 /dev/dri/card1
[ 68.514] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 68.514] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 68.514] (II) LoadModule: "modesetting"
[ 68.514] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 68.514] (II) Module modesetting: vendor="X.Org Foundation"
[ 68.514] compiled for 1.15.99.904, module version = 0.9.0
[ 68.514] Module class: X.Org Video Driver
[ 68.514] ABI class: X.Org Video Driver, version 18.0
[ 68.514] xf86: found device 1
[ 88.642] (II) intel(0): EDID vendor "AUO", prod id 8940
[ 88.643] (II) intel(0): Printing DDC gathered Modelines:
[ 88.643] (II) intel(0): Modeline "1366x768"x0.0 65.10 1366 1382 1390 1398 768 771 775 776 +hsync -vsync (46.6 kHz eP)
[ 408.083] (II) intel(0): EDID vendor "AUO", prod id 8940
[ 408.083] (II) intel(0): Printing DDC gathered Modelines:
[ 408.083] (II) intel(0): Modeline "1366x768"x0.0 65.10 1366 1382 1390 1398 768 771 775 776 +hsync -vsync (46.6 kHz eP)
[ 664.744] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 666.518] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 666.524] (II) intel(0): EDID vendor "AUO", prod id 8940
[ 666.524] (II) intel(0): Printing DDC gathered Modelines:
[ 666.524] (II) intel(0): Modeline "1366x768"x0.0 65.10 1366 1382 1390 1398 768 771 775 776 +hsync -vsync (46.6 kHz eP)
[ 666.557] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 666.558] (II) intel(0): EDID vendor "AUO", prod id 8940
[ 666.558] (II) intel(0): Printing DDC gathered Modelines:
[ 666.558] (II) intel(0): Modeline "1366x768"x0.0 65.10 1366 1382 1390 1398 768 771 775 776 +hsync -vsync (46.6 kHz eP)
[ 759.586] (II) intel(0): EDID vendor "AUO", prod id 8940
[ 759.587] (II) intel(0): Printing DDC gathered Modelines:
[ 759.587] (II) intel(0): Modeline "1366x768"x0.0 65.10 1366 1382 1390 1398 768 771 775 776 +hsync -vsync (46.6 kHz eP)Dodane:
Nikt nie spotkał się z podobnym problemem? Halo pomóżcie mi bo wujek Google jakos nie potrafi mi odpowiedzieć albo ja nie rozumiem go.
