Kod: Zaznacz cały
nocrs" and report a bug
[ 0.193850] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.198508] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.198528] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.198547] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.199452] PCI host bridge to bus 0000:00
[ 0.199464] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.199473] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.199481] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.199489] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.199496] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.199504] pci_bus 0000:00: root bus resource [mem 0x7f800000-0xdfffffff]
[ 0.199512] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff]
[ 0.199538] pci 0000:00:00.0: [8086:8100] type 00 class 0x060000
[ 0.199853] pci 0000:00:02.0: [8086:8108] type 00 class 0x030000
[ 0.199886] pci 0000:00:02.0: reg 0x10: [mem 0xf3f80000-0xf3ffffff]
[ 0.199903] pci 0000:00:02.0: reg 0x14: [io 0xc880-0xc887]
[ 0.199919] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff]
[ 0.199935] pci 0000:00:02.0: reg 0x1c: [mem 0xf3f40000-0xf3f7ffff]
[ 0.200311] pci 0000:00:1b.0: [8086:811b] type 00 class 0x040300
[ 0.200343] pci 0000:00:1b.0: reg 0x10: [mem 0xf3f38000-0xf3f3bfff 64bit]
[ 0.200438] pci 0000:00:1b.0: PME# supported from D0 D3hot
[ 0.200726] pci 0000:00:1c.0: [8086:8110] type 01 class 0x060400
[ 0.200821] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.200931] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.201128] pci 0000:00:1c.1: [8086:8112] type 01 class 0x060400
[ 0.201222] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.201328] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.201535] pci 0000:00:1d.0: [8086:8114] type 00 class 0x0c0300
[ 0.201587] pci 0000:00:1d.0: reg 0x20: [io 0xb880-0xb89f]
[ 0.201758] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.201947] pci 0000:00:1d.1: [8086:8115] type 00 class 0x0c0300
[ 0.202000] pci 0000:00:1d.1: reg 0x20: [io 0xc080-0xc09f]
[ 0.202164] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.202356] pci 0000:00:1d.2: [8086:8116] type 00 class 0x0c0300
[ 0.202408] pci 0000:00:1d.2: reg 0x20: [io 0xc480-0xc49f]
[ 0.202572] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.202779] pci 0000:00:1d.7: [8086:8117] type 00 class 0x0c0320
[ 0.202817] pci 0000:00:1d.7: reg 0x10: [mem 0xf3f37c00-0xf3f37fff]
[ 0.202954] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.203062] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.203250] pci 0000:00:1f.0: [8086:8119] type 00 class 0x060100
[ 0.203556] pci 0000:00:1f.1: [8086:811a] type 00 class 0x010180
[ 0.203610] pci 0000:00:1f.1: reg 0x20: [io 0xffa0-0xffaf]
[ 0.203638] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.203645] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.203652] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.203659] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.204089] pci 0000:03:00.0: [1969:1062] type 00 class 0x020000
[ 0.204132] pci 0000:03:00.0: reg 0x10: [mem 0xfbfc0000-0xfbffffff 64bit]
[ 0.204153] pci 0000:03:00.0: reg 0x18: [io 0xe880-0xe8ff]
[ 0.204295] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.212046] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.212059] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.212069] pci 0000:00:1c.0: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.212280] pci 0000:01:00.0: [168c:002b] type 00 class 0x028000
[ 0.212322] pci 0000:01:00.0: reg 0x10: [mem 0xfbef0000-0xfbefffff 64bit]
[ 0.212479] pci 0000:01:00.0: supports D1
[ 0.212486] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.220035] pci 0000:00:1c.1: PCI bridge to [bus 01-02]
[ 0.220047] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 0.220057] pci 0000:00:1c.1: bridge window [mem 0xf4000000-0xfbefffff]
[ 0.220068] pci 0000:00:1c.1: bridge window [mem 0xcc000000-0xcfffffff pref]
[ 0.220094] pci_bus 0000:00: on NUMA node 0
[ 0.222428] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.222632] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.222832] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.223032] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.223232] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 0.223431] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.223631] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.223831] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[ 0.224061] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.224283] ACPI : EC: GPE = 0xd, I/O: command/status = 0x66, data = 0x62
[ 0.224637] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.224637] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.224637] vgaarb: loaded
[ 0.224637] vgaarb: bridge control possible 0000:00:02.0
[ 0.224637] PCI: Using ACPI for IRQ routing
[ 0.224637] PCI: pci_cache_line_size set to 64 bytes
[ 0.224637] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.224637] e820: reserve RAM buffer [mem 0x7f650000-0x7fffffff]
[ 0.225064] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.225075] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.225088] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.228064] Switched to clocksource hpet
[ 0.248161] pnp: PnP ACPI init
[ 0.248234] ACPI: bus type PNP registered
[ 0.248757] system 00:00: [mem 0x7f800000-0x7fffffff] has been reserved
[ 0.248771] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.248956] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.249162] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.249725] system 00:03: [io 0x0374-0x0375] has been reserved
[ 0.249736] system 00:03: [io 0x03f4-0x03f5] has been reserved
[ 0.249745] system 00:03: [io 0x0380-0x0387] has been reserved
[ 0.249753] system 00:03: [io 0x09f4-0x09ff] has been reserved
[ 0.249762] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.249771] system 00:03: [io 0x0900-0x09f3] has been reserved
[ 0.249779] system 00:03: [io 0x0400-0x043f] has been reserved
[ 0.249788] system 00:03: [io 0x0480-0x04bf] has been reserved
[ 0.249798] system 00:03: [mem 0xf0000000-0xf0003fff] has been reserved
[ 0.249807] system 00:03: [mem 0x00000384-0x00000387] could not be reserved
[ 0.249817] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.250129] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.250538] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.250549] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.250559] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.250819] pnp 00:06: Plug and Play ACPI device, IDs SYN0a13 SYN0a01 SYN0a04 SYN0002 PNP0f13 (active)
[ 0.251068] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.251080] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.251774] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.251785] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.251795] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.251803] system 00:08: [mem 0x00100000-0x7f7fffff] could not be reserved
[ 0.251813] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.252402] pnp: PnP ACPI: found 9 devices
[ 0.252408] ACPI: bus type PNP unregistered
[ 0.252428] PnPBIOS: Disabled by ACPI PNP
[ 0.297084] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff pref] to [bus 03] add_size 200000
[ 0.297110] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff pref] get_res_add_size add_size 200000
[ 0.297133] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff pref]
[ 0.297142] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.297151] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.297164] pci 0000:00:1c.0: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.297174] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff pref]
[ 0.297188] pci 0000:00:1c.1: PCI bridge to [bus 01-02]
[ 0.297196] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 0.297207] pci 0000:00:1c.1: bridge window [mem 0xf4000000-0xfbefffff]
[ 0.297217] pci 0000:00:1c.1: bridge window [mem 0xcc000000-0xcfffffff pref]
[ 0.297231] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.297239] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.297246] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.297254] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.297261] pci_bus 0000:00: resource 8 [mem 0x7f800000-0xdfffffff]
[ 0.297269] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff]
[ 0.297277] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.297285] pci_bus 0000:03: resource 1 [mem 0xfbf00000-0xfbffffff]
[ 0.297292] pci_bus 0000:03: resource 2 [mem 0x80000000-0x801fffff pref]
[ 0.297300] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.297308] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xfbefffff]
[ 0.297315] pci_bus 0000:01: resource 2 [mem 0xcc000000-0xcfffffff pref]
[ 0.297454] NET: Registered protocol family 2
[ 0.298133] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.298185] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.298256] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.298368] TCP: reno registered
[ 0.298376] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.298397] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.298594] NET: Registered protocol family 1
[ 0.298651] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.299710] PCI: CLS 32 bytes, default 64
[ 0.299887] Unpacking initramfs...
[ 1.131641] Freeing initrd memory: 13744K (f6518000 - f7284000)
[ 1.132477] microcode: CPU0 sig=0x106c2, pf=0x1, revision=0x211
[ 1.132501] microcode: CPU1 sig=0x106c2, pf=0x1, revision=0x211
[ 1.132744] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.133865] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 1.133963] audit: initializing netlink subsys (disabled)
[ 1.134017] audit: type=2000 audit(1420369590.132:1): initialized
[ 1.135045] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.135098] zbud: loaded
[ 1.135372] VFS: Disk quotas dquot_6.5.2
[ 1.135417] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.135605] msgmni has been set to 1722
[ 1.136749] alg: No test for stdrng (krng)
[ 1.136843] bounce: pool size: 64 pages
[ 1.136910] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.137072] io scheduler noop registered
[ 1.137083] io scheduler deadline registered
[ 1.137211] io scheduler cfq registered (default)
[ 1.138012] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.138095] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.138326] intel_idle: MWAIT substates: 0x3020220
[ 1.138344] intel_idle: v0.4 model 0x1C
[ 1.138351] intel_idle: lapic_timer_reliable_states 0x2
[ 1.138367] tsc: Marking TSC unstable due to TSC halts in idle states deeper than C2
[ 1.138828] GHES: HEST is not enabled!
[ 1.138901] isapnp: Scanning for PnP cards...
[ 1.493178] isapnp: No Plug & Play device found
[ 1.493496] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.495280] Linux agpgart interface v0.103
[ 1.496158] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.518779] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.518800] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.519436] mousedev: PS/2 mouse device common for all mice
[ 1.520570] rtc_cmos 00:01: RTC can wake from S4
[ 1.520896] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.520942] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.521006] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.521864] TCP: cubic registered
[ 1.522035] NET: Registered protocol family 10
[ 1.522775] mip6: Mobile IPv6
[ 1.522788] NET: Registered protocol family 17
[ 1.522807] mpls_gso: MPLS GSO support
[ 1.523455] Using IPI No-Shortcut mode
[ 1.524044] registered taskstats version 1
[ 1.524969] rtc_cmos 00:01: setting system clock to 2015-01-04 11:06:31 UTC (1420369591)
[ 1.525211] PM: Hibernation image not present or could not be loaded.
[ 1.525975] Freeing unused kernel memory: 656K (c166b000 - c170f000)
[ 1.526154] Write protecting the kernel text: 4596k
[ 1.526268] Write protecting the kernel read-only data: 1452k
[ 1.526274] NX-protecting the kernel data: 3596k
[ 1.547290] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.563706] systemd-udevd[59]: starting version 215
[ 1.565479] random: systemd-udevd urandom read with 2 bits of entropy available
[ 1.656131] ACPI: bus type USB registered
[ 1.656358] usbcore: registered new interface driver usbfs
[ 1.656464] usbcore: registered new interface driver hub
[ 1.659941] usbcore: registered new device driver usb
[ 1.662920] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.664695] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.665090] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.665120] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 1.665145] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.665208] ehci-pci: EHCI PCI platform driver
[ 1.665239] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000b880
[ 1.665530] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.665543] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.665554] usb usb1: Product: UHCI Host Controller
[ 1.665563] usb usb1: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[ 1.665573] usb usb1: SerialNumber: 0000:00:1d.0
[ 1.668293] hub 1-0:1.0: USB hub found
[ 1.668337] hub 1-0:1.0: 2 ports detected
[ 1.669566] atl1c 0000:03:00.0: version 1.0.1.1-NAPI
[ 1.670280] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.670318] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 1.670344] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.670440] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000c080
[ 1.671310] SCSI subsystem initialized
[ 1.671889] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.671905] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.671916] usb usb2: Product: UHCI Host Controller
[ 1.671925] usb usb2: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[ 1.671935] usb usb2: SerialNumber: 0000:00:1d.1
[ 1.673721] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.673732] ACPI: Thermal Zone [TZ00] (41 C)
[ 1.675286] hub 2-0:1.0: USB hub found
[ 1.676446] hub 2-0:1.0: 2 ports detected
[ 1.678886] libata version 3.00 loaded.
[ 1.679534] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.679571] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 1.679595] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.679688] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c480
[ 1.682147] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.682161] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.682171] usb usb3: Product: UHCI Host Controller
[ 1.682181] usb usb3: Manufacturer: Linux 3.16.0-4-686-pae uhci_hcd
[ 1.682190] usb usb3: SerialNumber: 0000:00:1d.2
[ 1.682917] hub 3-0:1.0: USB hub found
[ 1.682946] hub 3-0:1.0: 2 ports detected
[ 1.685351] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.685389] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 1.685432] ehci-pci 0000:00:1d.7: debug port 1
[ 1.689425] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 1.690072] ehci-pci 0000:00:1d.7: irq 19, io mem 0xf3f37c00
[ 1.702887] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.704245] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.704259] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.704270] usb usb4: Product: EHCI Host Controller
[ 1.704279] usb usb4: Manufacturer: Linux 3.16.0-4-686-pae ehci_hcd
[ 1.704288] usb usb4: SerialNumber: 0000:00:1d.7
[ 1.707034] hub 4-0:1.0: USB hub found
[ 1.707089] hub 4-0:1.0: 8 ports detected
[ 1.736423] hub 1-0:1.0: USB hub found
[ 1.736486] hub 1-0:1.0: 2 ports detected
[ 1.760431] hub 2-0:1.0: USB hub found
[ 1.760485] hub 2-0:1.0: 2 ports detected
[ 1.784624] hub 3-0:1.0: USB hub found
[ 1.784719] hub 3-0:1.0: 2 ports detected
[ 1.786027] pata_sch 0000:00:1f.1: version 0.2
[ 1.789891] scsi0 : pata_sch
[ 1.790581] scsi1 : pata_sch
[ 1.791016] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.791029] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.952916] ata1.00: ATA-8: Hitachi HTS545016B9A300, PBBOC60N, max UDMA/133
[ 1.952927] ata1.00: 312581808 sectors, multi 16: LBA48
[ 1.969273] ata1.00: configured for UDMA/100
[ 1.969844] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54501 C60N PQ: 0 ANSI: 5
[ 2.024382] usb 4-5: new high-speed USB device number 2 using ehci-pci
[ 2.146338] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.146915] sd 0:0:0:0: [sda] Write Protect is off
[ 2.146931] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.147074] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.161240] usb 4-5: New USB device found, idVendor=13d3, idProduct=5126
[ 2.161269] usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=2
[ 2.161278] usb 4-5: Product: USB 2.0 PC Cam
[ 2.161285] usb 4-5: Manufacturer: Image Processor
[ 2.161291] usb 4-5: SerialNumber: USB 2.0 PC Cam
[ 2.202217] sda: sda1 sda2 < sda5 >
[ 2.204054] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.205945] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.584308] PM: Starting manual resume from disk
[ 2.584324] PM: Hibernation image partition 8:5 present
[ 2.584329] PM: Looking for hibernation image.
[ 2.584736] PM: Image not found (code -22)
[ 2.584743] PM: Hibernation image not present or could not be loaded.
[ 2.668452] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.411261] random: nonblocking pool is initialized
[ 6.488156] lp: driver loaded but no devices found
[ 6.608188] ppdev: user-space parallel port driver
[ 6.908566] fuse init (API version 7.23)
[ 7.183163] systemd-udevd[153]: starting version 215
[ 9.669688] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 9.674977] ACPI: Lid Switch [LID]
[ 9.675401] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 9.675420] ACPI: Sleep Button [SLPB]
[ 9.675776] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 9.675790] ACPI: Power Button [PWRB]
[ 9.686066] ACPI: AC Adapter [AC0] (on-line)
[ 9.817719] wmi: Mapper loaded
[ 9.822662] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.982424] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 9.983197] ACPI: Battery Slot [BAT0] (battery absent)
[ 10.404782] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 10.426901] systemd-journald[132]: Received request to flush runtime journal from PID 1
[ 10.522952] [drm] Initialized drm 1.1.0 20060810
[ 10.871217] asus_wmi: ASUS WMI generic driver loaded
[ 10.884220] asus_wmi: Initialization: 0x0
[ 10.884324] asus_wmi: BIOS WMI version: 0.5
[ 10.884495] asus_wmi: SFUN value: 0x0
[ 10.891110] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input7
[ 10.968976] cfg80211: Calling CRDA to update world regulatory domain
[ 11.002998] asus_wmi: Backlight controlled by ACPI video driver
[ 11.124417] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 11.133443] acpi device:0b: registered as cooling_device2
[ 11.134447] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 11.134850] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 11.134860] [drm] No driver support for vblank timestamp query.
[ 11.752497] media: Linux media interface: v0.10
[ 11.795925] Linux video capture interface: v2.00
[ 11.910575] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000, board id: 3655, fw id: 600854
[ 11.998121] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 12.282561] gma500 0000:00:02.0: trying to get vblank count for disabled pipe 0
[ 12.282641] gma500 0000:00:02.0: trying to get vblank count for disabled pipe 0
[ 12.402677] uvcvideo: Found UVC 1.00 device USB 2.0 PC Cam (13d3:5126)
[ 12.405395] input: USB 2.0 PC Cam as /devices/pci0000:00/0000:00:1d.7/usb4/4-5/4-5:1.0/input/input9
[ 12.406087] usbcore: registered new interface driver uvcvideo
[ 12.406096] USB Video Class driver (1.1.1)
[ 12.512713] fbcon: psbdrmfb (fb0) is primary device
[ 12.741719] ath: phy0: ASPM enabled: 0x42
[ 12.741725] ath: EEPROM regdomain: 0x60
[ 12.741727] ath: EEPROM indicates we should expect a direct regpair map
[ 12.741733] ath: Country alpha2 being used: 00
[ 12.741734] ath: Regpair used: 0x60
[ 12.798251] Console: switching to colour frame buffer device 170x48
[ 12.822363] gma500 0000:00:02.0: fb0: psbdrmfb frame buffer device
[ 12.822374] gma500 0000:00:02.0: registered panic notifier
[ 12.832341] gma500 0000:00:02.0: Backlight lvds set brightness 7a127a12
[ 12.832371] [drm] Initialized gma500 1.0.0 20140314 for 0000:00:02.0 on minor 0
[ 12.867081] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 12.868407] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf84e0000, irq=17
[ 12.932110] gma500 0000:00:02.0: Backlight lvds set brightness 7a127a12
[ 13.351334] cfg80211: World regulatory domain updated:
[ 13.351349] cfg80211: DFS Master region: unset
[ 13.351355] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 13.351366] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 13.351375] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 13.351382] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 13.351391] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
[ 13.351399] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 13.351409] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 13.351418] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 13.351427] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 13.417822] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 13.417836] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 13.417845] sound hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 13.417851] sound hdaudioC0D0: mono: mono_out=0x0
[ 13.417857] sound hdaudioC0D0: inputs:
[ 13.417866] sound hdaudioC0D0: Mic=0x18
[ 13.417873] sound hdaudioC0D0: Internal Mic=0x12
[ 13.424386] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input10
[ 13.425715] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 13.426252] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 13.660812] gma500 0000:00:02.0: Backlight lvds set brightness 7a127a12
[ 13.664105] gma500 0000:00:02.0: Backlight lvds set brightness 7a120138
[ 13.968894] Adding 1991676k swap on /dev/sda5. Priority:-1 extents:1 across:1991676k FS
[ 15.289191] RPC: Registered named UNIX socket transport module.
[ 15.289202] RPC: Registered udp transport module.
[ 15.289207] RPC: Registered tcp transport module.
[ 15.289212] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 15.333534] FS-Cache: Loaded
[ 15.377343] FS-Cache: Netfs 'nfs' registered for caching
[ 15.452670] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 24.067990] atl1c 0000:03:00.0: irq 40 for MSI/MSI-X
[ 24.085308] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.110095] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 25.778291] gma500 0000:00:02.0: Backlight lvds set brightness 7a127a12
[ 25.801261] wlan0: authenticate with 98:fc:11:ca:5a:1b
[ 25.808370] wlan0: send auth to 98:fc:11:ca:5a:1b (try 1/3)
[ 25.811196] wlan0: authenticated
[ 25.816112] wlan0: associate with 98:fc:11:ca:5a:1b (try 1/3)
[ 25.831543] wlan0: RX AssocResp from 98:fc:11:ca:5a:1b (capab=0x431 status=0 aid=1)
[ 25.831699] wlan0: associated
[ 25.831784] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 174.740429] usb 4-3: new high-speed USB device number 3 using ehci-pci
[ 174.878300] usb 4-3: New USB device found, idVendor=13fe, idProduct=4100
[ 174.878315] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 174.878325] usb 4-3: Product: USB DISK 2.0
[ 174.878334] usb 4-3: Manufacturer:
[ 174.878342] usb 4-3: SerialNumber: 070126B938655B71
[ 174.939011] usb-storage 4-3:1.0: USB Mass Storage device detected
[ 174.939353] scsi2 : usb-storage 4-3:1.0
[ 174.939952] usbcore: registered new interface driver usb-storage
[ 176.024550] scsi 2:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 4
[ 176.027471] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 177.647708] sd 2:0:0:0: [sdb] 30283008 512-byte logical blocks: (15.5 GB/14.4 GiB)
[ 177.649376] sd 2:0:0:0: [sdb] Write Protect is off
[ 177.649407] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 177.650401] sd 2:0:0:0: [sdb] No Caching mode page found
[ 177.650435] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 177.683081] sdb: sdb1
[ 177.690686] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 179.876801] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 179.919393] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 218.852448] perf interrupt took too long (2507 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 447.114945] perf interrupt took too long (5067 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
[ 792.281675] snd_hda_intel 0000:00:1b.0: Invalid position buffer, using LPIB read method instead.
[ 1919.830914] perf interrupt took too long (10007 > 10000), lowering kernel.perf_event_max_sample_rate to 12500
[12015.889604] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[12015.894944] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[14770.621740] usb 4-3: USB disconnect, device number 3
[14775.740143] usb 4-3: new high-speed USB device number 4 using ehci-pci
[14775.879178] usb 4-3: New USB device found, idVendor=13fe, idProduct=4100
[14775.879198] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[14775.879211] usb 4-3: Product: USB DISK 2.0
[14775.879222] usb 4-3: Manufacturer:
[14775.879233] usb 4-3: SerialNumber: 070126B938655B71
[14775.880767] usb-storage 4-3:1.0: USB Mass Storage device detected
[14775.883460] scsi3 : usb-storage 4-3:1.0
[14776.972392] scsi 3:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 4
[14776.974388] sd 3:0:0:0: Attached scsi generic sg1 type 0
[14778.596632] sd 3:0:0:0: [sdb] 30283008 512-byte logical blocks: (15.5 GB/14.4 GiB)
[14778.597386] sd 3:0:0:0: [sdb] Write Protect is off
[14778.597397] sd 3:0:0:0: [sdb] Mode Sense: 23 00 00 00
[14778.598175] sd 3:0:0:0: [sdb] No Caching mode page found
[14778.598192] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[14778.623774] sdb: sdb1
[14778.630856] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[14780.922622] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[14780.931391] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
root@mania:/home/mania# Kod: Zaznacz cały
root@mania:/home/mania# cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=d16ae319-8974-46f8-b1e2-974162f851d8 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=f01d418a-8ee2-401c-b761-208bc6dea88e none swap sw 0 0
/dev/sdb1 /media/usb0 auto rw,user,noauto 0 0
