B

Andrzej123 · Post autor: **Andrzej123** » 27 grudnia 2014, 13:58

Witam. Podczas uruchamiania debiana pojawia się (widoczny na załącznikach) biały prostokąt na którym kilka razy wyświetla się nazwa błędu. Po wystąpieniu tego błędu system jak gdyby nigdy nic uruchamia się poprawnie. Błąd występuje od instalacji systemu. System po raz drugi jest instalowany na tym samym komputerze. Po pierwszej instalacji nie występował taki błąd. Co może być przyczyną?

Rafal_F · Post autor: **Rafal_F** » 27 grudnia 2014, 14:41

Zobacz czy po wpisaniu:

Kod: Zaznacz cały

dmesg

gdzieś tam w logu nie ma czegoś więcej na temat tego błędu.

Andrzej123 · Post autor: **Andrzej123** » 27 grudnia 2014, 14:57

Dzięki za odpowiedź. Po wpisaniu tego do terminala wyświetla mi się bardzo długa lista. Znalazłem coś takiego [ 2325.540820] floppy0: disk absent or changed during operation. Nie jestem zaawansowanym użytkownikiem linuxa ale obstawiam że to coś z dyskiem. Czy może to mieć związek z tym, ze ten debian był instalowany "jeden na drugi" czyli na starego debiana? Niby z formatem ale nie za bardzo się znam i nie poprawnie wykonałem tą operacje

Cały log:

Kod: Zaznacz cały

[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000005fffc000 (usable)
[    0.000000]  BIOS-e820: 000000005fffc000 - 000000005ffff000 (ACPI data)
[    0.000000]  BIOS-e820: 000000005ffff000 - 0000000060000000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] SMBIOS 2.3 present.
[    0.000000] DMI: System Manufacturer System Name/A7V8X-X, BIOS ASUS A7V8X-X ACPI BIOS Revision 1014 Beta 002 06/23/2005
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] last_pfn = 0x5fffc max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 base 040000000 mask FE0000000 write-back
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 base 0F8000000 mask FFC000000 write-combining
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] initial memory mapped : 0 - 01a00000
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[    0.000000]  0000000000 - 0000200000 page 4k
[    0.000000]  0000200000 - 0037800000 page 2M
[    0.000000]  0037800000 - 00379fe000 page 4k
[    0.000000] kernel direct mapping tables up to 379fe000 @ 19f9000-1a00000
[    0.000000] RAMDISK: 36c86000 - 3763b000
[    0.000000] ACPI: RSDP 000f5e20 00014 (v00 ASUS  )
[    0.000000] ACPI: RSDT 5fffc000 00030 (v01 ASUS   A7V8X-X  42302E31 MSFT 31313031)
[    0.000000] ACPI: FACP 5fffc0b2 00074 (v01 ASUS   A7V8X-X  42302E31 MSFT 31313031)
[    0.000000] ACPI: DSDT 5fffc126 02A13 (v01   ASUS A7V8X-X  00001000 MSFT 0100000B)
[    0.000000] ACPI: FACS 5ffff000 00040
[    0.000000] ACPI: BOOT 5fffc030 00028 (v01 ASUS   A7V8X-X  42302E31 MSFT 31313031)
[    0.000000] ACPI: APIC 5fffc058 0005A (v01 ASUS   A7V8X-X  42302E31 MSFT 31313031)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 645MB HIGHMEM available.
[    0.000000] 889MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 379fe000
[    0.000000]   low ram: 0 - 379fe000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000379fe
[    0.000000]   HighMem  0x000379fe -> 0x0005fffc
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0005fffc
[    0.000000] On node 0 totalpages: 393099
[    0.000000] free_area_init_node: node 0, pgdat c1412800, node_mem_map f6086200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1748 pages used for memmap
[    0.000000]   Normal zone: 221994 pages, LIFO batch:31
[    0.000000]   HighMem zone: 1292 pages used for memmap
[    0.000000]   HighMem zone: 164082 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0xe408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 60000000 (gap: 60000000:9ec00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @f79e6000 s33280 r0 d24064 u57344
[    0.000000] pcpu-alloc: s33280 r0 d24064 u57344 alloc=14*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 390027
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=293489e5-df2d-4f94-b81c-e8a252d324a5 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000379fe:0005fffc)
[    0.000000] Memory: 1544040k/1572848k available (2858k kernel code, 28356k reserved, 1342k data, 420k init, 661496k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
[    0.000000]     pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
[    0.000000]     vmalloc : 0xf81fe000 - 0xff9fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf79fe000   ( 889 MB)
[    0.000000]       .init : 0xc141b000 - 0xc1484000   ( 420 kB)
[    0.000000]       .data : 0xc12ca980 - 0xc141a200   (1342 kB)
[    0.000000]       .text : 0xc1000000 - 0xc12ca980   (2858 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=f5c06000 soft=f5c08000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2070.922 MHz processor.
[    0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4141.84 BogoMIPS (lpj=8283688)
[    0.004010] pid_max: default: 32768 minimum: 301
[    0.004071] Security Framework initialized
[    0.004084] AppArmor: AppArmor disabled by boot time parameter
[    0.004105] Mount-cache hash table entries: 512
[    0.004327] Initializing cgroup subsys cpuacct
[    0.004334] Initializing cgroup subsys memory
[    0.004349] Initializing cgroup subsys devices
[    0.004353] Initializing cgroup subsys freezer
[    0.004356] Initializing cgroup subsys net_cls
[    0.004360] Initializing cgroup subsys blkio
[    0.004369] Initializing cgroup subsys perf_event
[    0.004413] mce: CPU supports 4 MCE banks
[    0.004463] SMP alternatives: switching to UP code
[    0.006748] Freeing SMP alternatives: 8k freed
[    0.006756] ACPI: Core revision 20110623
[    0.011150] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.012437] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.052141] CPU0: AMD Athlon(TM) XP 2600+ stepping 01
[    0.056003] Performance Events: AMD PMU driver.
[    0.056003] ... version:                0
[    0.056003] ... bit width:              48
[    0.056003] ... generic registers:      4
[    0.056003] ... value mask:             0000ffffffffffff
[    0.056003] ... max period:             00007fffffffffff
[    0.056003] ... fixed-purpose events:   0
[    0.056003] ... event mask:             000000000000000f
[    0.056003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.056003] Brought up 1 CPUs
[    0.056003] Total of 1 processors activated (4141.84 BogoMIPS).
[    0.056003] devtmpfs: initialized
[    0.056003] PM: Registering ACPI NVS region at 5ffff000 (4096 bytes)
[    0.056003] print_constraints: dummy: 
[    0.056003] NET: Registered protocol family 16
[    0.056003] ACPI: bus type pci registered
[    0.056003] PCI: PCI BIOS revision 2.10 entry at 0xf1960, last bus=1
[    0.056003] PCI: Using configuration type 1 for base access
[    0.056321] bio: create slab <bio-0> at 0
[    0.056436] ACPI: Added _OSI(Module Device)
[    0.056439] ACPI: Added _OSI(Processor Device)
[    0.056442] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.056445] ACPI: Added _OSI(Processor Aggregator Device)
[    0.057016] ACPI: EC: Look up EC in DSDT
[    0.061634] ACPI: Interpreter enabled
[    0.061647] ACPI: (supports S0 S1 S4 S5)
[    0.061674] ACPI: Using IOAPIC for interrupt routing
[    0.067458] ACPI: No dock devices found.
[    0.067462] HEST: Table not found.
[    0.067470] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.067564] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.067753] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.067758] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.067762] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.067765] pci_root PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff] (ignored)
[    0.067769] pci_root PNP0A03:00: host bridge window [mem 0x60000000-0xfebfffff] (ignored)
[    0.067793] pci 0000:00:00.0: [1106:3189] type 0 class 0x000600
[    0.067805] pci 0000:00:00.0: reg 10: [mem 0xf8000000-0xfbffffff pref]
[    0.067876] pci 0000:00:01.0: [1106:b168] type 1 class 0x000604
[    0.067918] pci 0000:00:01.0: supports D1
[    0.067950] pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03
[    0.067990] pci 0000:00:10.0: reg 20: [io  0xd800-0xd81f]
[    0.068041] pci 0000:00:10.0: supports D1 D2
[    0.068045] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.068069] pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03
[    0.068109] pci 0000:00:10.1: reg 20: [io  0xd400-0xd41f]
[    0.068144] pci 0000:00:10.1: supports D1 D2
[    0.068147] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.068168] pci 0000:00:10.2: [1106:3038] type 0 class 0x000c03
[    0.068207] pci 0000:00:10.2: reg 20: [io  0xd000-0xd01f]
[    0.068242] pci 0000:00:10.2: supports D1 D2
[    0.068245] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.068267] pci 0000:00:10.3: [1106:3104] type 0 class 0x000c03
[    0.068282] pci 0000:00:10.3: reg 10: [mem 0xed800000-0xed8000ff]
[    0.068342] pci 0000:00:10.3: supports D1 D2
[    0.068344] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.068369] pci 0000:00:11.0: [1106:3177] type 0 class 0x000601
[    0.068424] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.068433] pci 0000:00:11.0: quirk: [io  0xe400-0xe47f] claimed by vt8235 PM
[    0.068438] pci 0000:00:11.0: quirk: [io  0xe800-0xe80f] claimed by vt8235 SMB
[    0.068478] pci 0000:00:11.1: [1106:0571] type 0 class 0x000101
[    0.068520] pci 0000:00:11.1: reg 20: [io  0xb800-0xb80f]
[    0.068578] pci 0000:00:11.5: [1106:3059] type 0 class 0x000401
[    0.068593] pci 0000:00:11.5: reg 10: [io  0xe000-0xe0ff]
[    0.068656] pci 0000:00:11.5: supports D1 D2
[    0.068678] pci 0000:00:12.0: [1106:3065] type 0 class 0x000200
[    0.068694] pci 0000:00:12.0: reg 10: [io  0xb400-0xb4ff]
[    0.068704] pci 0000:00:12.0: reg 14: [mem 0xed000000-0xed0000ff]
[    0.068759] pci 0000:00:12.0: supports D1 D2
[    0.068762] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.068815] pci 0000:01:00.0: [10de:0110] type 0 class 0x000300
[    0.068829] pci 0000:01:00.0: reg 10: [mem 0xee000000-0xeeffffff]
[    0.068837] pci 0000:01:00.0: reg 14: [mem 0xf0000000-0xf7ffffff pref]
[    0.068865] pci 0000:01:00.0: reg 30: [mem 0xefff0000-0xefffffff pref]
[    0.068918] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.068925] pci 0000:00:01.0:   bridge window [mem 0xee000000-0xefefffff]
[    0.068930] pci 0000:00:01.0:   bridge window [mem 0xeff00000-0xf7ffffff pref]
[    0.068938] pci_bus 0000:00: on NUMA node 0
[    0.068943] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.069199] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[    0.069279]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[    0.071095] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
[    0.071172] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
[    0.071245] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
[    0.071316] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
[    0.071396] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12)
[    0.071515] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12)
[    0.071593] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    0.071802] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.071806] vgaarb: loaded
[    0.071808] vgaarb: bridge control possible 0000:01:00.0
[    0.071885] PCI: Using ACPI for IRQ routing
[    0.071890] PCI: pci_cache_line_size set to 32 bytes
[    0.071937] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    0.071941] reserve RAM buffer: 000000005fffc000 - 000000005fffffff 
[    0.074993] pnp: PnP ACPI init
[    0.075030] ACPI: bus type pnp registered
[    0.075204] pnp 00:00: [mem 0x00000000-0x0009ffff]
[    0.075209] pnp 00:00: [mem 0x000f0000-0x000fffff]
[    0.075213] pnp 00:00: [mem 0x00100000-0x5fffffff]
[    0.075216] pnp 00:00: [mem 0xfec00000-0xfec000ff]
[    0.075219] pnp 00:00: [mem 0xfee00000-0xfee00fff]
[    0.075306] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.075311] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.075315] system 00:00: [mem 0x00100000-0x5fffffff] could not be reserved
[    0.075320] system 00:00: [mem 0xfec00000-0xfec000ff] could not be reserved
[    0.075324] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.075330] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.075629] pnp 00:01: [bus 00-ff]
[    0.075634] pnp 00:01: [io  0x0cf8-0x0cff]
[    0.075638] pnp 00:01: [io  0x0000-0x0cf7 window]
[    0.075641] pnp 00:01: [io  0x0d00-0xffff window]
[    0.075645] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[    0.075648] pnp 00:01: [mem 0x000c8000-0x000dffff window]
[    0.075651] pnp 00:01: [mem 0x60000000-0xfebfffff window]
[    0.075722] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[    0.075773] pnp 00:02: [io  0xe400-0xe47f]
[    0.075777] pnp 00:02: [io  0xe800-0xe81f]
[    0.075780] pnp 00:02: [mem 0xfff80000-0xffffffff]
[    0.075783] pnp 00:02: [mem 0xffb80000-0xffbfffff]
[    0.075842] system 00:02: [io  0xe400-0xe47f] has been reserved
[    0.075847] system 00:02: [io  0xe800-0xe81f] could not be reserved
[    0.075851] system 00:02: [mem 0xfff80000-0xffffffff] could not be reserved
[    0.075855] system 00:02: [mem 0xffb80000-0xffbfffff] has been reserved
[    0.075860] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.075894] pnp 00:03: [io  0x0010-0x001f]
[    0.075898] pnp 00:03: [io  0x0022-0x002d]
[    0.075901] pnp 00:03: [io  0x0030-0x003f]
[    0.075904] pnp 00:03: [io  0x0044-0x005f]
[    0.075907] pnp 00:03: [io  0x0062-0x0063]
[    0.075910] pnp 00:03: [io  0x0065-0x006f]
[    0.075913] pnp 00:03: [io  0x0074-0x007f]
[    0.075916] pnp 00:03: [io  0x0091-0x0093]
[    0.075918] pnp 00:03: [io  0x00a2-0x00bf]
[    0.075921] pnp 00:03: [io  0x00e0-0x00ef]
[    0.075924] pnp 00:03: [io  0x04d0-0x04d1]
[    0.075983] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.076025] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.076110] pnp 00:04: [dma 4]
[    0.076114] pnp 00:04: [io  0x0000-0x000f]
[    0.076117] pnp 00:04: [io  0x0080-0x0090]
[    0.076120] pnp 00:04: [io  0x0094-0x009f]
[    0.076123] pnp 00:04: [io  0x00c0-0x00df]
[    0.076170] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.076188] pnp 00:05: [io  0x0070-0x0073]
[    0.076207] pnp 00:05: [irq 8]
[    0.076251] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.076265] pnp 00:06: [io  0x0061]
[    0.076308] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.076323] pnp 00:07: [io  0x00f0-0x00ff]
[    0.076331] pnp 00:07: [irq 13]
[    0.076376] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.076601] pnp 00:08: [io  0x03f2-0x03f5]
[    0.076605] pnp 00:08: [io  0x03f7]
[    0.076613] pnp 00:08: [irq 6]
[    0.076616] pnp 00:08: [dma 2]
[    0.076678] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.077267] pnp 00:09: [io  0x0378-0x037f]
[    0.077274] pnp 00:09: [io  0x0778-0x077b]
[    0.077282] pnp 00:09: [irq 7]
[    0.077285] pnp 00:09: [dma 3]
[    0.077369] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.077782] pnp 00:0a: [io  0x03f8-0x03ff]
[    0.077791] pnp 00:0a: [irq 4]
[    0.077871] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.078275] pnp 00:0b: [io  0x0060]
[    0.078279] pnp 00:0b: [io  0x0064]
[    0.078286] pnp 00:0b: [irq 1]
[    0.078333] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.078948] pnp 00:0c: [io  0x0200-0x0207]
[    0.079008] pnp 00:0c: Plug and Play ACPI device, IDs PNPb02f (active)
[    0.079038] pnp 00:0d: [io  0x002e-0x002f]
[    0.079042] pnp 00:0d: [io  0x0290-0x0297]
[    0.079045] pnp 00:0d: [io  0x0370-0x0375]
[    0.079106] system 00:0d: [io  0x0290-0x0297] has been reserved
[    0.079111] system 00:0d: [io  0x0370-0x0375] has been reserved
[    0.079115] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.079138] pnp: PnP ACPI: found 14 devices
[    0.079140] ACPI: ACPI bus type pnp unregistered
[    0.079145] PnPBIOS: Disabled by ACPI PNP
[    0.116750] Switching to clocksource acpi_pm
[    0.116786] PCI: max bus depth: 1 pci_try_num: 2
[    0.116812] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.116822] pci 0000:00:01.0:   bridge window [mem 0xee000000-0xefefffff]
[    0.116827] pci 0000:00:01.0:   bridge window [mem 0xeff00000-0xf7ffffff pref]
[    0.116848] pci 0000:00:01.0: setting latency timer to 64
[    0.116854] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.116857] pci_bus 0000:00: resource 1 [mem 0x00000000-0x3ffffffff]
[    0.116861] pci_bus 0000:01: resource 1 [mem 0xee000000-0xefefffff]
[    0.116865] pci_bus 0000:01: resource 2 [mem 0xeff00000-0xf7ffffff pref]
[    0.116956] NET: Registered protocol family 2
[    0.119776] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.119776] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.121572] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.122559] TCP: Hash tables configured (established 131072 bind 65536)
[    0.122564] TCP reno registered
[    0.122572] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.122602] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.122789] NET: Registered protocol family 1
[    0.122815] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[    0.122987] pci 0000:01:00.0: Boot video device
[    0.122992] PCI: CLS 32 bytes, default 32
[    0.123096] Unpacking initramfs...
[    0.462614] Freeing initrd memory: 9940k freed
[    0.479448] Simple Boot Flag at 0x3a set to 0x1
[    0.480113] audit: initializing netlink socket (disabled)
[    0.480137] type=2000 audit(1419683915.480:1): initialized
[    0.496880] highmem bounce pool size: 64 pages
[    0.496889] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.497428] VFS: Disk quotas dquot_6.5.2
[    0.497469] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.497569] msgmni has been set to 1743
[    0.497805] alg: No test for stdrng (krng)
[    0.497848] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.497853] io scheduler noop registered
[    0.497856] io scheduler deadline registered
[    0.497866] io scheduler cfq registered (default)
[    0.498010] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.498043] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.498047] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.498417] ERST: Table is not found!
[    0.498420] GHES: HEST is not enabled!
[    0.498438] isapnp: Scanning for PnP cards...
[    0.851730] isapnp: No Plug & Play device found
[    0.851840] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.872097] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.892724] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.892975] Linux agpgart interface v0.103
[    0.893141] agpgart: Detected VIA KT400/KT400A/KT600 chipset
[    0.897254] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[    0.897420] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.897424] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.898195] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.898367] mousedev: PS/2 mouse device common for all mice
[    0.898438] rtc_cmos 00:05: RTC can wake from S4
[    0.898585] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.898634] rtc0: alarms up to one month, 242 bytes nvram
[    0.898652] cpuidle: using governor ladder
[    0.898655] cpuidle: using governor menu
[    0.898972] TCP cubic registered
[    0.899004] NET: Registered protocol family 10
[    0.899695] Mobile IPv6
[    0.899700] NET: Registered protocol family 17
[    0.899707] Registering the dns_resolver key type
[    0.899750] Using IPI No-Shortcut mode
[    0.899907] PM: Hibernation image not present or could not be loaded.
[    0.899924] registered taskstats version 1
[    0.900464] rtc_cmos 00:05: setting system clock to 2014-12-27 12:38:36 UTC (1419683916)
[    0.900520] Initializing network drop monitor service
[    0.900697] Freeing unused kernel memory: 420k freed
[    0.901407] Write protecting the kernel text: 2860k
[    0.901448] Write protecting the kernel read-only data: 1084k
[    0.917969] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.932322] udevd[44]: starting version 175
[    1.054783] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[    1.055577] via-rhine 0000:00:12.0: eth0: VIA Rhine II at 0x1b400, 00:0c:6e:15:e6:58, IRQ 23
[    1.056332] via-rhine 0000:00:12.0: eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1
[    1.086880] Floppy drive(s): fd0 is 1.44M
[    1.092515] usbcore: registered new interface driver usbfs
[    1.092558] usbcore: registered new interface driver hub
[    1.111430] usbcore: registered new device driver usb
[    1.112343] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.119050] ehci_hcd 0000:00:10.3: EHCI Host Controller
[    1.119104] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
[    1.119199] ehci_hcd 0000:00:10.3: irq 21, io mem 0xed800000
[    1.124129] SCSI subsystem initialized
[    1.136110] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00
[    1.136179] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.136184] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.136187] usb usb1: Product: EHCI Host Controller
[    1.136190] usb usb1: Manufacturer: Linux 3.2.0-4-686-pae ehci_hcd
[    1.136193] usb usb1: SerialNumber: 0000:00:10.3
[    1.136413] hub 1-0:1.0: USB hub found
[    1.136422] hub 1-0:1.0: 6 ports detected
[    1.137185] uhci_hcd: USB Universal Host Controller Interface driver
[    1.137280] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    1.137303] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    1.137340] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d800
[    1.137414] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.137418] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.137422] usb usb2: Product: UHCI Host Controller
[    1.137425] usb usb2: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[    1.137428] usb usb2: SerialNumber: 0000:00:10.0
[    1.142578] hub 2-0:1.0: USB hub found
[    1.142592] hub 2-0:1.0: 2 ports detected
[    1.142735] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    1.142751] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[    1.142787] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d400
[    1.142849] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.142853] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.142857] usb usb3: Product: UHCI Host Controller
[    1.142859] usb usb3: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[    1.142862] usb usb3: SerialNumber: 0000:00:10.1
[    1.143045] hub 3-0:1.0: USB hub found
[    1.143052] hub 3-0:1.0: 2 ports detected
[    1.143144] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    1.143155] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[    1.143178] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d000
[    1.143228] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.143233] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.143236] usb usb4: Product: UHCI Host Controller
[    1.143239] usb usb4: Manufacturer: Linux 3.2.0-4-686-pae uhci_hcd
[    1.143242] usb usb4: SerialNumber: 0000:00:10.2
[    1.143401] hub 4-0:1.0: USB hub found
[    1.143407] hub 4-0:1.0: 2 ports detected
[    1.147940] FDC 0 is a post-1991 82077
[    1.148118] libata version 3.00 loaded.
[    1.149748] pata_via 0000:00:11.1: version 0.3.4
[    1.149772] pata_via 0000:00:11.1: can't derive routing for PCI INT A
[    1.154673] scsi0 : pata_via
[    1.158401] scsi1 : pata_via
[    1.159075] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xb800 irq 14
[    1.159080] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xb808 irq 15
[    1.324524] ata1.00: native sectors (78165359) is smaller than sectors (78165360)
[    1.324534] ata1.00: ATA-5: ST340823A, 3.39, max UDMA/100
[    1.324538] ata1.00: 78165360 sectors, multi 16: LBA 
[    1.340365] ata1.00: configured for UDMA/100
[    1.340578] scsi 0:0:0:0: Direct-Access     ATA      ST340823A        3.39 PQ: 0 ANSI: 5
[    1.507168] Refined TSC clocksource calibration: 2071.022 MHz.
[    1.507176] Switching to clocksource tsc
[    1.512332] ata2.01: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL11, max UDMA/33
[    1.528189] ata2.01: configured for UDMA/33
[    1.536975] scsi 1:0:1:0: CD-ROM            HL-DT-ST DVDRAM GSA-4167B DL11 PQ: 0 ANSI: 5
[    1.552061] sd 0:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
[    1.552142] sd 0:0:0:0: [sda] Write Protect is off
[    1.552147] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.552181] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.559320] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.559328] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.559996] sr 1:0:1:0: Attached scsi CD-ROM sr0
[    1.643895]  sda: sda1 sda2 < sda5 >
[    1.644634] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.653921] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.654637] sr 1:0:1:0: Attached scsi generic sg1 type 5
[    1.744032] usb 2-2: new low-speed USB device number 2 using uhci_hcd
[    1.912279] usb 2-2: New USB device found, idVendor=15ca, idProduct=00c3
[    1.912285] usb 2-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    1.912289] usb 2-2: Product: USB Optical Mouse
[    1.944537] input: USB Optical Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input1
[    1.944858] generic-usb 0003:15CA:00C3.0001: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:10.0-2/input0
[    1.945166] usbcore: registered new interface driver usbhid
[    1.945170] usbhid: USB HID core driver
[    2.156058] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[    2.355569] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    2.368680] usb 3-2: New USB device found, idVendor=03f0, idProduct=0604
[    2.368687] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.368691] usb 3-2: Product: DeskJet 840C
[    2.368694] usb 3-2: Manufacturer: Hewlett-Packard 
[    2.368697] usb 3-2: SerialNumber: CN0BF1P2XJKV
[    5.230496] udevd[291]: starting version 175
[    5.775232] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    5.775244] ACPI: Power Button [PWRB]
[    5.775362] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    5.775367] ACPI: Power Button [PWRF]
[    6.443733] NET: Registered protocol family 23
[    6.527705] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    6.900369] gameport gameport0: NS558 PnP Gameport is pnp00:0c/gameport0, io 0x200, speed 1169kHz
[    7.008432] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    7.030776] [drm] Initialized drm 1.1.0 20060810
[    7.153141] parport_pc 00:09: reported by Plug and Play ACPI
[    7.153218] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[    7.370569] wmi: Mapper loaded
[    7.612959] [drm] nouveau 0000:01:00.0: Detected an NV10 generation card (0x011000b2)
[    7.613680] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
[    7.641843] [drm] nouveau 0000:01:00.0: ... appears to be valid
[    7.641847] [drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN
[    7.642695] [drm] nouveau 0000:01:00.0: BMP BIOS found
[    7.642698] [drm] nouveau 0000:01:00.0: BMP version 5.20
[    7.642703] [drm] nouveau 0000:01:00.0: Bios version 03.11.01.24
[    7.642708] [drm] nouveau 0000:01:00.0: No useful DCB data in VBIOS
[    7.643933] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
[    7.645865] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xAAD2
[    7.645885] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xB1AE
[    7.645893] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xAAED
[    7.645912] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xB155
[    7.645921] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xAB80
[    7.645926] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xACC2
[    7.645948] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xABA5
[    7.663170] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 7 at offset 0xAC5D
[    7.664143] [TTM] Zone  kernel: Available graphics memory: 446456 kiB
[    7.664149] [TTM] Zone highmem: Available graphics memory: 777204 kiB
[    7.664152] [TTM] Initializing pool allocator
[    7.664161] [TTM] Initializing DMA pool allocator
[    7.664184] [drm] nouveau 0000:01:00.0: Detected 32MiB VRAM (SDRAM)
[    7.666356] agpgart-via 0000:00:00.0: AGP 2.0 bridge
[    7.666380] agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode
[    7.666428] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
[    7.666433] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
[    7.666551] [drm] nouveau 0000:01:00.0: Saving VGA fonts
[    7.705958] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    7.705964] [drm] No driver support for vblank timestamp query.
[    7.706054] [drm] nouveau 0000:01:00.0: 0 available performance level(s)
[    7.706060] [drm] nouveau 0000:01:00.0: c: core 174MHz memory 286MHz
[    7.707634] [drm] nouveau 0000:01:00.0: 0xB3C6: Parsing digital output script table
[    7.759493] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x48000, bo f7059600
[    7.759754] fbcon: nouveaufb (fb0) is primary device
[    7.773971] Console: switching to colour frame buffer device 160x64
[    7.775393] fb0: nouveaufb frame buffer device
[    7.775396] drm: registered panic notifier
[    7.775406] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
[    7.824071] snd_via82xx 0000:00:11.5: setting latency timer to 64
[    8.338359] codec_read: codec 0 is not valid [0xfe0000]
[    8.344605] codec_read: codec 0 is not valid [0xfe0000]
[    8.350783] codec_read: codec 0 is not valid [0xfe0000]
[    8.356855] codec_read: codec 0 is not valid [0xfe0000]
[    9.556694] usblp0: Disabling reads from problematic bidirectional printer
[    9.567997] usblp0: USB Unidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0604
[    9.568478] usbcore: registered new interface driver usblp
[   11.292222] EXT4-fs (sda1): re-mounted. Opts: (null)
[   11.670972] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   11.905060] loop: module loaded
[   13.619713] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   15.161700] RPC: Registered named UNIX socket transport module.
[   15.161707] RPC: Registered udp transport module.
[   15.161710] RPC: Registered tcp transport module.
[   15.161712] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   15.237705] FS-Cache: Loaded
[   15.334099] FS-Cache: Netfs 'nfs' registered for caching
[   15.354707] Installing knfsd (copyright (C) 1996 [EMAIL="okir@monad.swb.de"]okir@monad.swb.de[/EMAIL]).
[   17.739394] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input5
[   20.459892] Bluetooth: Core ver 2.16
[   20.459942] NET: Registered protocol family 31
[   20.459945] Bluetooth: HCI device and connection manager initialized
[   20.459951] Bluetooth: HCI socket layer initialized
[   20.459954] Bluetooth: L2CAP socket layer initialized
[   20.460872] Bluetooth: SCO socket layer initialized
[   20.503447] Bluetooth: RFCOMM TTY layer initialized
[   20.503467] Bluetooth: RFCOMM socket layer initialized
[   20.503470] Bluetooth: RFCOMM ver 1.11
[   20.659730] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   20.659736] Bluetooth: BNEP filters: protocol multicast
[   20.772962] lp0: using parport0 (interrupt-driven).
[   20.788765] ppdev: user-space parallel port driver
[   24.526907] usblp0: removed
[   24.553073] usblp0: Disabling reads from problematic bidirectional printer
[   24.573627] usblp0: USB Unidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0604
[   28.669541] via-rhine 0000:00:12.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   40.064035] eth0: no IPv6 routers present
[  340.432017] usb 2-1: new low-speed USB device number 3 using uhci_hcd
[  340.552014] usb 2-1: device descriptor read/64, error -71
[  340.776065] usb 2-1: device descriptor read/64, error -71
[  340.992014] usb 2-1: new low-speed USB device number 4 using uhci_hcd
[  341.112012] usb 2-1: device descriptor read/64, error -71
[  341.336038] usb 2-1: device descriptor read/64, error -71
[  341.552014] usb 2-1: new low-speed USB device number 5 using uhci_hcd
[  341.960023] usb 2-1: device not accepting address 5, error -71
[  342.072021] usb 2-1: new low-speed USB device number 6 using uhci_hcd
[  342.480050] usb 2-1: device not accepting address 6, error -71
[  342.480082] hub 2-0:1.0: unable to enumerate USB device on port 1
[  343.432042] usb 1-1: new high-speed USB device number 5 using ehci_hcd
[  343.564911] usb 1-1: New USB device found, idVendor=0fce, idProduct=0161
[  343.564916] usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[  343.564919] usb 1-1: Product: MT11i
[  343.564922] usb 1-1: Manufacturer: Sony
[  343.564924] usb 1-1: SerialNumber: BX90300U76
[  425.772595] usb 1-1: USB disconnect, device number 5
[  429.612050] hub 1-0:1.0: over-current condition on port 1
[  429.820022] hub 1-0:1.0: over-current condition on port 2
[  430.028042] hub 1-0:1.0: over-current condition on port 1
[  430.236056] hub 2-0:1.0: over-current condition on port 1
[  430.444019] hub 2-0:1.0: over-current condition on port 2
[  430.444029] usb 2-2: USB disconnect, device number 2
[  432.176018] usb 2-2: new low-speed USB device number 7 using uhci_hcd
[  432.344515] usb 2-2: New USB device found, idVendor=15ca, idProduct=00c3
[  432.344522] usb 2-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[  432.344526] usb 2-2: Product: USB Optical Mouse
[  432.363328] input: USB Optical Mouse as /devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/input/input6
[  432.363776] generic-usb 0003:15CA:00C3.0002: input,hidraw0: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:10.0-2/input0
[ 2324.244046] floppy0: disk absent or changed during operation
[ 2324.244056] end_request: I/O error, dev fd0, sector 0
[ 2324.244066] Buffer I/O error on device fd0, logical block 0
[ 2324.244177] floppy0: disk absent or changed during operation
[ 2324.244182] end_request: I/O error, dev fd0, sector 0
[ 2324.244186] Buffer I/O error on device fd0, logical block 0
[ 2324.258582] sr 1:0:1:0: [sr0] Device not ready
[ 2324.258588] sr 1:0:1:0: [sr0]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2324.258593] sr 1:0:1:0: [sr0]  Sense Key : Not Ready [current] 
[ 2324.258599] sr 1:0:1:0: [sr0]  Add. Sense: Medium not present
[ 2324.258608] sr 1:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 2324.258618] end_request: I/O error, dev sr0, sector 0
[ 2324.258625] Buffer I/O error on device sr0, logical block 0
[ 2324.258631] Buffer I/O error on device sr0, logical block 1
[ 2324.258634] Buffer I/O error on device sr0, logical block 2
[ 2324.258637] Buffer I/O error on device sr0, logical block 3
[ 2324.258640] Buffer I/O error on device sr0, logical block 4
[ 2324.258643] Buffer I/O error on device sr0, logical block 5
[ 2324.258647] Buffer I/O error on device sr0, logical block 6
[ 2324.258650] Buffer I/O error on device sr0, logical block 7
[ 2324.258691] sr 1:0:1:0: [sr0] unaligned transfer
[ 2324.258709] sr 1:0:1:0: [sr0] unaligned transfer
[ 2324.258726] sr 1:0:1:0: [sr0] unaligned transfer
[ 2324.258742] sr 1:0:1:0: [sr0] unaligned transfer
[ 2324.258758] sr 1:0:1:0: [sr0] unaligned transfer
[ 2324.258774] sr 1:0:1:0: [sr0] unaligned transfer
[ 2324.258790] sr 1:0:1:0: [sr0] unaligned transfer
[ 2324.258806] sr 1:0:1:0: [sr0] unaligned transfer
[ 2325.540820] floppy0: disk absent or changed during operation
[ 2325.540830] end_request: I/O error, dev fd0, sector 0
[ 2325.540900] floppy0: disk absent or changed during operation
[ 2325.540905] end_request: I/O error, dev fd0, sector 0
[ 2325.553315] sr 1:0:1:0: [sr0] Device not ready
[ 2325.553321] sr 1:0:1:0: [sr0]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2325.553326] sr 1:0:1:0: [sr0]  Sense Key : Not Ready [current] 
[ 2325.553332] sr 1:0:1:0: [sr0]  Add. Sense: Medium not present
[ 2325.553341] sr 1:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 2325.553352] end_request: I/O error, dev sr0, sector 0
[ 2325.553401] sr 1:0:1:0: [sr0] unaligned transfer
[ 2325.553419] sr 1:0:1:0: [sr0] unaligned transfer
[ 2325.553436] sr 1:0:1:0: [sr0] unaligned transfer
[ 2325.553452] sr 1:0:1:0: [sr0] unaligned transfer
[ 2325.553467] sr 1:0:1:0: [sr0] unaligned transfer
[ 2325.553483] sr 1:0:1:0: [sr0] unaligned transfer
[ 2325.553499] sr 1:0:1:0: [sr0] unaligned transfer
[ 2325.553515] sr 1:0:1:0: [sr0] unaligned transfer
[ 2372.368044] floppy0: disk absent or changed during operation
[ 2372.368054] end_request: I/O error, dev fd0, sector 0
[ 2372.368061] quiet_error: 58 callbacks suppressed
[ 2372.368065] Buffer I/O error on device fd0, logical block 0
[ 2372.368133] floppy0: disk absent or changed during operation
[ 2372.368138] end_request: I/O error, dev fd0, sector 0
[ 2372.368141] Buffer I/O error on device fd0, logical block 0
[ 2372.382412] sr 1:0:1:0: [sr0] Device not ready
[ 2372.382418] sr 1:0:1:0: [sr0]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2372.382423] sr 1:0:1:0: [sr0]  Sense Key : Not Ready [current] 
[ 2372.382429] sr 1:0:1:0: [sr0]  Add. Sense: Medium not present
[ 2372.382438] sr 1:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 2372.382449] end_request: I/O error, dev sr0, sector 0
[ 2372.382455] Buffer I/O error on device sr0, logical block 0
[ 2372.382460] Buffer I/O error on device sr0, logical block 1
[ 2372.382463] Buffer I/O error on device sr0, logical block 2
[ 2372.382466] Buffer I/O error on device sr0, logical block 3
[ 2372.382469] Buffer I/O error on device sr0, logical block 4
[ 2372.382473] Buffer I/O error on device sr0, logical block 5
[ 2372.382476] Buffer I/O error on device sr0, logical block 6
[ 2372.382479] Buffer I/O error on device sr0, logical block 7
[ 2372.382517] sr 1:0:1:0: [sr0] unaligned transfer
[ 2372.382535] sr 1:0:1:0: [sr0] unaligned transfer
[ 2372.382551] sr 1:0:1:0: [sr0] unaligned transfer
[ 2372.382567] sr 1:0:1:0: [sr0] unaligned transfer
[ 2372.382583] sr 1:0:1:0: [sr0] unaligned transfer
[ 2372.382598] sr 1:0:1:0: [sr0] unaligned transfer
[ 2372.382613] sr 1:0:1:0: [sr0] unaligned transfer
[ 2372.382629] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.252619] floppy0: disk absent or changed during operation
[ 2373.252629] end_request: I/O error, dev fd0, sector 0
[ 2373.252697] floppy0: disk absent or changed during operation
[ 2373.252701] end_request: I/O error, dev fd0, sector 0
[ 2373.265848] sr 1:0:1:0: [sr0] Device not ready
[ 2373.265855] sr 1:0:1:0: [sr0]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2373.265860] sr 1:0:1:0: [sr0]  Sense Key : Not Ready [current] 
[ 2373.265866] sr 1:0:1:0: [sr0]  Add. Sense: Medium not present
[ 2373.265875] sr 1:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 2373.265885] end_request: I/O error, dev sr0, sector 0
[ 2373.265932] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.265949] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.265966] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.265981] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.265997] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.266012] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.266028] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.266043] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.460466] floppy0: disk absent or changed during operation
[ 2373.460476] end_request: I/O error, dev fd0, sector 0
[ 2373.460544] floppy0: disk absent or changed during operation
[ 2373.460549] end_request: I/O error, dev fd0, sector 0
[ 2373.473690] sr 1:0:1:0: [sr0] Device not ready
[ 2373.473697] sr 1:0:1:0: [sr0]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2373.473702] sr 1:0:1:0: [sr0]  Sense Key : Not Ready [current] 
[ 2373.473708] sr 1:0:1:0: [sr0]  Add. Sense: Medium not present
[ 2373.473717] sr 1:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 2373.473728] end_request: I/O error, dev sr0, sector 0
[ 2373.473774] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.473792] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.473808] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.473824] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.473839] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.473855] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.473870] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.473886] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.620434] floppy0: disk absent or changed during operation
[ 2373.620443] end_request: I/O error, dev fd0, sector 0
[ 2373.620511] floppy0: disk absent or changed during operation
[ 2373.620515] end_request: I/O error, dev fd0, sector 0
[ 2373.633653] sr 1:0:1:0: [sr0] Device not ready
[ 2373.633660] sr 1:0:1:0: [sr0]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2373.633665] sr 1:0:1:0: [sr0]  Sense Key : Not Ready [current] 
[ 2373.633670] sr 1:0:1:0: [sr0]  Add. Sense: Medium not present
[ 2373.633680] sr 1:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 2373.633690] end_request: I/O error, dev sr0, sector 0
[ 2373.633736] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.633753] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.633769] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.633785] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.633800] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.633816] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.633831] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.633846] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.781602] floppy0: disk absent or changed during operation
[ 2373.781612] end_request: I/O error, dev fd0, sector 0
[ 2373.781680] floppy0: disk absent or changed during operation
[ 2373.781684] end_request: I/O error, dev fd0, sector 0
[ 2373.794895] sr 1:0:1:0: [sr0] Device not ready
[ 2373.794901] sr 1:0:1:0: [sr0]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2373.794906] sr 1:0:1:0: [sr0]  Sense Key : Not Ready [current] 
[ 2373.794911] sr 1:0:1:0: [sr0]  Add. Sense: Medium not present
[ 2373.794921] sr 1:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 2373.794931] end_request: I/O error, dev sr0, sector 0
[ 2373.795251] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.795277] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.795295] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.795311] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.795326] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.795342] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.795357] sr 1:0:1:0: [sr0] unaligned transfer
[ 2373.795373] sr 1:0:1:0: [sr0] unaligned transfer
[ 2387.812048] floppy0: disk absent or changed during operation
[ 2387.812058] end_request: I/O error, dev fd0, sector 0
[ 2387.812065] quiet_error: 160 callbacks suppressed
[ 2387.812069] Buffer I/O error on device fd0, logical block 0
[ 2387.812139] floppy0: disk absent or changed during operation
[ 2387.812144] end_request: I/O error, dev fd0, sector 0
[ 2387.812147] Buffer I/O error on device fd0, logical block 0
[ 2387.826416] sr 1:0:1:0: [sr0] Device not ready
[ 2387.826423] sr 1:0:1:0: [sr0]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2387.826428] sr 1:0:1:0: [sr0]  Sense Key : Not Ready [current] 
[ 2387.826433] sr 1:0:1:0: [sr0]  Add. Sense: Medium not present
[ 2387.826442] sr 1:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 2387.826452] end_request: I/O error, dev sr0, sector 0
[ 2387.826459] Buffer I/O error on device sr0, logical block 0
[ 2387.826464] Buffer I/O error on device sr0, logical block 1
[ 2387.826467] Buffer I/O error on device sr0, logical block 2
[ 2387.826471] Buffer I/O error on device sr0, logical block 3
[ 2387.826474] Buffer I/O error on device sr0, logical block 4
[ 2387.826477] Buffer I/O error on device sr0, logical block 5
[ 2387.826480] Buffer I/O error on device sr0, logical block 6
[ 2387.826483] Buffer I/O error on device sr0, logical block 7
[ 2387.826524] sr 1:0:1:0: [sr0] unaligned transfer
[ 2387.826542] sr 1:0:1:0: [sr0] unaligned transfer
[ 2387.826559] sr 1:0:1:0: [sr0] unaligned transfer
[ 2387.826575] sr 1:0:1:0: [sr0] unaligned transfer
[ 2387.826591] sr 1:0:1:0: [sr0] unaligned transfer
[ 2387.826606] sr 1:0:1:0: [sr0] unaligned transfer
[ 2387.826622] sr 1:0:1:0: [sr0] unaligned transfer
[ 2387.826638] sr 1:0:1:0: [sr0] unaligned transfer
[ 2388.331170] floppy0: disk absent or changed during operation
[ 2388.331180] end_request: I/O error, dev fd0, sector 0
[ 2388.331250] floppy0: disk absent or changed during operation
[ 2388.331255] end_request: I/O error, dev fd0, sector 0
[ 2388.344843] sr 1:0:1:0: [sr0] Device not ready
[ 2388.344849] sr 1:0:1:0: [sr0]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2388.344854] sr 1:0:1:0: [sr0]  Sense Key : Not Ready [current] 
[ 2388.344860] sr 1:0:1:0: [sr0]  Add. Sense: Medium not present
[ 2388.344869] sr 1:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 2388.344879] end_request: I/O error, dev sr0, sector 0
[ 2388.344964] sr 1:0:1:0: [sr0] unaligned transfer
[ 2388.344984] sr 1:0:1:0: [sr0] unaligned transfer
[ 2388.345002] sr 1:0:1:0: [sr0] unaligned transfer
[ 2388.345018] sr 1:0:1:0: [sr0] unaligned transfer
[ 2388.345034] sr 1:0:1:0: [sr0] unaligned transfer
[ 2388.345050] sr 1:0:1:0: [sr0] unaligned transfer
[ 2388.345066] sr 1:0:1:0: [sr0] unaligned transfer
[ 2388.345082] sr 1:0:1:0: [sr0] unaligned transfer
[ 2449.632029] floppy0: disk absent or changed during operation
[ 2449.632039] end_request: I/O error, dev fd0, sector 0
[ 2449.632046] quiet_error: 58 callbacks suppressed
[ 2449.632050] Buffer I/O error on device fd0, logical block 0
[ 2449.632117] floppy0: disk absent or changed during operation
[ 2449.632122] end_request: I/O error, dev fd0, sector 0
[ 2449.632126] Buffer I/O error on device fd0, logical block 0
[ 2449.646419] sr 1:0:1:0: [sr0] Device not ready
[ 2449.646425] sr 1:0:1:0: [sr0]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2449.646430] sr 1:0:1:0: [sr0]  Sense Key : Not Ready [current] 
[ 2449.646436] sr 1:0:1:0: [sr0]  Add. Sense: Medium not present
[ 2449.646445] sr 1:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 2449.646456] end_request: I/O error, dev sr0, sector 0
[ 2449.646462] Buffer I/O error on device sr0, logical block 0
[ 2449.646467] Buffer I/O error on device sr0, logical block 1
[ 2449.646470] Buffer I/O error on device sr0, logical block 2
[ 2449.646474] Buffer I/O error on device sr0, logical block 3
[ 2449.646477] Buffer I/O error on device sr0, logical block 4
[ 2449.646480] Buffer I/O error on device sr0, logical block 5
[ 2449.646483] Buffer I/O error on device sr0, logical block 6
[ 2449.646486] Buffer I/O error on device sr0, logical block 7
[ 2449.646524] sr 1:0:1:0: [sr0] unaligned transfer
[ 2449.646542] sr 1:0:1:0: [sr0] unaligned transfer
[ 2449.646558] sr 1:0:1:0: [sr0] unaligned transfer
[ 2449.646574] sr 1:0:1:0: [sr0] unaligned transfer
[ 2449.646589] sr 1:0:1:0: [sr0] unaligned transfer
[ 2449.646604] sr 1:0:1:0: [sr0] unaligned transfer
[ 2449.646620] sr 1:0:1:0: [sr0] unaligned transfer
[ 2449.646635] sr 1:0:1:0: [sr0] unaligned transfer
[ 2451.015679] floppy0: disk absent or changed during operation
[ 2451.015689] end_request: I/O error, dev fd0, sector 0
[ 2451.015756] floppy0: disk absent or changed during operation
[ 2451.015760] end_request: I/O error, dev fd0, sector 0
[ 2451.029277] sr 1:0:1:0: [sr0] Device not ready
[ 2451.029284] sr 1:0:1:0: [sr0]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2451.029289] sr 1:0:1:0: [sr0]  Sense Key : Not Ready [current] 
[ 2451.029295] sr 1:0:1:0: [sr0]  Add. Sense: Medium not present
[ 2451.029303] sr 1:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 2451.029314] end_request: I/O error, dev sr0, sector 0
[ 2451.029360] sr 1:0:1:0: [sr0] unaligned transfer
[ 2451.029378] sr 1:0:1:0: [sr0] unaligned transfer
[ 2451.029393] sr 1:0:1:0: [sr0] unaligned transfer
[ 2451.029408] sr 1:0:1:0: [sr0] unaligned transfer
[ 2451.029424] sr 1:0:1:0: [sr0] unaligned transfer
[ 2451.029438] sr 1:0:1:0: [sr0] unaligned transfer
[ 2451.029453] sr 1:0:1:0: [sr0] unaligned transfer
[ 2451.029469] sr 1:0:1:0: [sr0] unaligned transfer
[ 2509.944027] floppy0: disk absent or changed during operation
[ 2509.944037] end_request: I/O error, dev fd0, sector 0
[ 2509.944044] quiet_error: 58 callbacks suppressed
[ 2509.944048] Buffer I/O error on device fd0, logical block 0
[ 2509.944116] floppy0: disk absent or changed during operation
[ 2509.944120] end_request: I/O error, dev fd0, sector 0
[ 2509.944124] Buffer I/O error on device fd0, logical block 0
[ 2509.958402] sr 1:0:1:0: [sr0] Device not ready
[ 2509.958408] sr 1:0:1:0: [sr0]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2509.958413] sr 1:0:1:0: [sr0]  Sense Key : Not Ready [current] 
[ 2509.958419] sr 1:0:1:0: [sr0]  Add. Sense: Medium not present
[ 2509.958428] sr 1:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 2509.958438] end_request: I/O error, dev sr0, sector 0
[ 2509.958445] Buffer I/O error on device sr0, logical block 0
[ 2509.958450] Buffer I/O error on device sr0, logical block 1
[ 2509.958453] Buffer I/O error on device sr0, logical block 2
[ 2509.958457] Buffer I/O error on device sr0, logical block 3
[ 2509.958460] Buffer I/O error on device sr0, logical block 4
[ 2509.958463] Buffer I/O error on device sr0, logical block 5
[ 2509.958467] Buffer I/O error on device sr0, logical block 6
[ 2509.958470] Buffer I/O error on device sr0, logical block 7
[ 2509.958510] sr 1:0:1:0: [sr0] unaligned transfer
[ 2509.958527] sr 1:0:1:0: [sr0] unaligned transfer
[ 2509.958544] sr 1:0:1:0: [sr0] unaligned transfer
[ 2509.958560] sr 1:0:1:0: [sr0] unaligned transfer
[ 2509.958575] sr 1:0:1:0: [sr0] unaligned transfer
[ 2509.958591] sr 1:0:1:0: [sr0] unaligned transfer
[ 2509.958606] sr 1:0:1:0: [sr0] unaligned transfer
[ 2509.958621] sr 1:0:1:0: [sr0] unaligned transfer
[ 2592.752782] sr 1:0:1:0: [sr0] Device not ready
[ 2592.752789] sr 1:0:1:0: [sr0]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2592.752794] sr 1:0:1:0: [sr0]  Sense Key : Not Ready [current] 
[ 2592.752799] sr 1:0:1:0: [sr0]  Add. Sense: Medium not present
[ 2592.752809] sr 1:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 08 00
[ 2592.752819] end_request: I/O error, dev sr0, sector 0
[ 2592.752825] quiet_error: 24 callbacks suppressed
[ 2592.752829] Buffer I/O error on device sr0, logical block 0
[ 2592.752834] Buffer I/O error on device sr0, logical block 1
[ 2592.752837] Buffer I/O error on device sr0, logical block 2
[ 2592.752840] Buffer I/O error on device sr0, logical block 3
[ 2592.752844] Buffer I/O error on device sr0, logical block 4
[ 2592.752847] Buffer I/O error on device sr0, logical block 5
[ 2592.752850] Buffer I/O error on device sr0, logical block 6
[ 2592.752853] Buffer I/O error on device sr0, logical block 7
[ 2592.752858] Buffer I/O error on device sr0, logical block 8
[ 2592.752862] Buffer I/O error on device sr0, logical block 9
[ 2592.752901] sr 1:0:1:0: [sr0] unaligned transfer
[ 2592.752920] sr 1:0:1:0: [sr0] unaligned transfer
[ 2592.752938] sr 1:0:1:0: [sr0] unaligned transfer
[ 2592.752954] sr 1:0:1:0: [sr0] unaligned transfer
[ 2592.752971] sr 1:0:1:0: [sr0] unaligned transfer
[ 2592.752987] sr 1:0:1:0: [sr0] unaligned transfer
[ 2592.753004] sr 1:0:1:0: [sr0] unaligned transfer
[ 2592.753020] sr 1:0:1:0: [sr0] unaligned transfer
[ 2692.367459] ISO 9660 Extensions: Microsoft Joliet Level 1
[ 2692.408198] ISOFS: changing to secondary root
[ 2793.466851] VFS: busy inodes on changed media or resized disk sr0
[ 2798.043301] iso9660: Corrupted directory entry in block 0 of inode 1792
[ 2798.043318] iso9660: Corrupted directory entry in block 0 of inode 1792
[ 3569.456584] iso9660: Corrupted directory entry in block 0 of inode 1792
[ 3569.655226] iso9660: Corrupted directory entry in block 0 of inode 1792
[ 3569.656267] iso9660: Corrupted directory entry in block 0 of inode 1792
[ 3569.656322] iso9660: Corrupted directory entry in block 0 of inode 1792
[ 3569.656540] iso9660: Corrupted directory entry in block 0 of inode 1792
[ 3569.656578] iso9660: Corrupted directory entry in block 0 of inode 1792
[ 3569.656624] iso9660: Corrupted directory entry in block 0 of inode 1792

Post autor: **marcin1982** » 27 grudnia 2014, 15:40

Podaj wynik polecenia z terminala:

Kod: Zaznacz cały

cat /etc/fstab

[ 3569.656578] iso9660: Corrupted directory entry in block 0 of inode 1792 [ 3569.656624] iso9660: Corrupted directory entry in block 0 of inode 1792

Masz jakąś nie pierwszej świeżości płytę w napędzie CD/DVD?

Rafal_F · Post autor: **Rafal_F** » 27 grudnia 2014, 17:40

Co do błędu z pierwszego postu to może spróbuj zaktualizować jądro do tego z backportów.

Andrzej123 · Post autor: **Andrzej123** » 30 grudnia 2014, 12:37

@marcin1982

Kod: Zaznacz cały

# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=293489e5-df2d-4f94-b81c-e8a252d324a5 /               ext4    errors=remount-ro 0       1
# /home was on /dev/sda5 during installation
UUID=8857a901-eea0-4d2b-b46d-f14d8fd54b9f /home           ext4    defaults        0       2
/dev/fd0        /media/floppy0  auto    rw,user,noauto  0       0

mati75 · Post autor: **mati75** » 30 grudnia 2014, 13:31

https://dug.net.pl/tekst/194

Post autor: **marcin1982** » 30 grudnia 2014, 17:14

Usuń z pliku /etc/fstab wpis dotyczący stacji dyskietek:

Kod: Zaznacz cały

/dev/fd0        /media/floppy0  auto    rw,user,noauto  0       0

Przebuduj obraz jądra:

Kod: Zaznacz cały

su -c 'update-initramfs -u'

mati75 · Post autor: **mati75** » 31 grudnia 2014, 15:01

Po co przebudowywać obraz jądra jak nic w nim nie zmienia?

Post autor: **marcin1982** » 31 grudnia 2014, 16:54

Fakt, może w tym przypadku to niepotrzebne. Ale miałem taką sytuację, że po zmianach UUID (też w /etc/fstab) system bez przebudowania initramfs nie chciał się uruchomić.

B

Bład podczas uruchamiania debiana wheezy 7.5 lxde