Instalacja Sterowników reallink RT2870 usb
W jaki sposób się zamyka? Aplikacja się wyłącza (znika z paska), czy tylko minimalizuje?
Jeżeli się wyłącza, to po wyłączeniu otwórz emulator terminala i wpisz:
Ponownie spróbuj się połączyć i wklej to co wyświetli się w terminalu. Wklej też ponownie (po tym jak spróbujesz się połączyć):
Jeżeli się wyłącza, to po wyłączeniu otwórz emulator terminala i wpisz:
Kod: Zaznacz cały
nm-appletKod: Zaznacz cały
dmesgApplet nie znika tylko się minimalizuje. Teraz czasami jest lista sieci w applecie, czasami nie.
Po wpisaniu pojawił się dodatkowy applet, który zamknęłem.
dmesg:
Kod: Zaznacz cały
demiu@SybilSys-Debian:~$ nm-applet
** (nm-applet:2780): WARNING **: Couldn't register with accessibility bus: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
^Cnm-applet-Message: PID 0 (we are 2780) sent signal 2, shutting down...dmesg:
Kod: Zaznacz cały
demiu@SybilSys-Debian:~$ dmesg[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-16) ) #1 SMP Debian 3.13.7-1 (2014-03-25)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13-1-amd64 root=UUID=a5df41f1-f3ce-472e-8b73-32669bdb8a75 ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dd700fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dd701000-0x00000000ddb80fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ddb81000-0x00000000ddc0bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ddc0c000-0x00000000ddca9fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ddcaa000-0x00000000dedc8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dedc9000-0x00000000dedc9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dedca000-0x00000000dee0cfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dee0d000-0x00000000df232fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000df233000-0x00000000df7f3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000df7f4000-0x00000000df7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: MSI MS-7752/Z77A-G45 (MS-7752), BIOS V2.10 02/28/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FF0000000 write-back
[ 0.000000] 2 base 210000000 mask FF8000000 write-back
[ 0.000000] 3 base 218000000 mask FFC000000 write-back
[ 0.000000] 4 base 21C000000 mask FFE000000 write-back
[ 0.000000] 5 base 21E000000 mask FFF000000 write-back
[ 0.000000] 6 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd770-0x000fd77f] mapped at [ffff8800000fd770]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01a9b000, 0x01a9bfff] PGTABLE
[ 0.000000] BRK [0x01a9c000, 0x01a9cfff] PGTABLE
[ 0.000000] BRK [0x01a9d000, 0x01a9dfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21ee00000-0x21effffff]
[ 0.000000] [mem 0x21ee00000-0x21effffff] page 2M
[ 0.000000] BRK [0x01a9e000, 0x01a9efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21edfffff]
[ 0.000000] [mem 0x21c000000-0x21edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
[ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xdd700fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xdd5fffff] page 2M
[ 0.000000] [mem 0xdd600000-0xdd700fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xddb81000-0xddc0bfff]
[ 0.000000] [mem 0xddb81000-0xddc0bfff] page 4k
[ 0.000000] BRK [0x01a9f000, 0x01a9ffff] PGTABLE
[ 0.000000] BRK [0x01aa0000, 0x01aa0fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xdedc9000-0xdedc9fff]
[ 0.000000] [mem 0xdedc9000-0xdedc9fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xdee0d000-0xdf232fff]
[ 0.000000] [mem 0xdee0d000-0xdeffffff] page 4k
[ 0.000000] [mem 0xdf000000-0xdf1fffff] page 2M
[ 0.000000] [mem 0xdf200000-0xdf232fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xdf7f4000-0xdf7fffff]
[ 0.000000] [mem 0xdf7f4000-0xdf7fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x36752000-0x373a0fff]
[ 0.000000] ACPI: RSDP 00000000000f0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 00000000ddc9a078 000074 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000ddca42d8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000ddc9a188 00A14C (v02 ALASKA A M I 00000024 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000ddca8080 000040
[ 0.000000] ACPI: APIC 00000000ddca43e8 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 00000000ddca4460 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 00000000ddca44a8 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000ddca44e8 00081B (v01 Intel_ AoacTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: HPET 00000000ddca4d08 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 00000000ddca4d40 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000ddca50b0 0005CC (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000ddca5680 000B22 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: BGRT 00000000ddca61a8 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21effffff]
[ 0.000000] NODE_DATA [mem 0x21efef000-0x21eff3fff]
[ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880216600000-ffff88021d7fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x21effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xdd700fff]
[ 0.000000] node 0: [mem 0xddb81000-0xddc0bfff]
[ 0.000000] node 0: [mem 0xdedc9000-0xdedc9fff]
[ 0.000000] node 0: [mem 0xdee0d000-0xdf232fff]
[ 0.000000] node 0: [mem 0xdf7f4000-0xdf7fffff]
[ 0.000000] node 0: [mem 0x100000000-0x21effffff]
[ 0.000000] On node 0 totalpages: 2083675
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12362 pages used for memmap
[ 0.000000] DMA32 zone: 904127 pages, LIFO batch:31
[ 0.000000] Normal zone: 16072 pages used for memmap
[ 0.000000] Normal zone: 1175552 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdd701000-0xddb80fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xddc0c000-0xddca9fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xddcaa000-0xdedc8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdedca000-0xdee0cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf233000-0xdf7f3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021ec00000 s85824 r8192 d20672 u524288
[ 0.000000] pcpu-alloc: s85824 r8192 d20672 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2055164
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13-1-amd64 root=UUID=a5df41f1-f3ce-472e-8b73-32669bdb8a75 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8127572K/8334700K available (4809K kernel code, 693K rwdata, 1620K rodata, 988K init, 952K bss, 207128K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 3399.873 MHz processor
[ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6799.74 BogoMIPS (lpj=13599492)
[ 0.000003] pid_max: default: 32768 minimum: 301
[ 0.000016] Security Framework initialized
[ 0.000018] AppArmor: AppArmor disabled by boot time parameter
[ 0.000019] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.000271] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.001428] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001955] Mount-cache hash table entries: 256
[ 0.002052] Initializing cgroup subsys memory
[ 0.002055] Initializing cgroup subsys devices
[ 0.002056] Initializing cgroup subsys freezer
[ 0.002056] Initializing cgroup subsys blkio
[ 0.002057] Initializing cgroup subsys perf_event
[ 0.002072] CPU: Physical Processor ID: 0
[ 0.002072] CPU: Processor Core ID: 0
[ 0.002076] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.002076] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.002287] mce: CPU supports 9 MCE banks
[ 0.002295] CPU0: Thermal monitoring enabled (TM1)
[ 0.002301] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[ 0.002301] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.002301] tlb_flushall_shift: 2
[ 0.002365] Freeing SMP alternatives memory: 20K (ffffffff819a6000 - ffffffff819ab000)
[ 0.002990] ACPI: Core revision 20131115
[ 0.005852] ACPI: All ACPI Tables successfully acquired
[ 0.017345] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.057003] smpboot: CPU0: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz (fam: 06, model: 3a, stepping: 09)
[ 0.057007] TSC deadline timer enabled
[ 0.057012] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.057016] ... version: 3
[ 0.057016] ... bit width: 48
[ 0.057016] ... generic registers: 8
[ 0.057017] ... value mask: 0000ffffffffffff
[ 0.057017] ... max period: 0000ffffffffffff
[ 0.057018] ... fixed-purpose events: 3
[ 0.057018] ... event mask: 00000007000000ff
[ 0.057165] x86: Booting SMP configuration:
[ 0.070525] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.057166] .... node #0, CPUs: #1 #2 #3
[ 0.097302] x86: Booted up 1 node, 4 CPUs
[ 0.097305] smpboot: Total of 4 processors activated (27198.98 BogoMIPS)
[ 0.099178] devtmpfs: initialized
[ 0.100672] PM: Registering ACPI NVS region [mem 0xddc0c000-0xddca9fff] (647168 bytes)
[ 0.100685] PM: Registering ACPI NVS region [mem 0xdedca000-0xdee0cfff] (274432 bytes)
[ 0.100774] NET: Registered protocol family 16
[ 0.100822] cpuidle: using governor ladder
[ 0.100822] cpuidle: using governor menu
[ 0.100835] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.100836] ACPI: bus type PCI registered
[ 0.100837] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.100874] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.100876] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.104414] PCI: Using configuration type 1 for base access
[ 0.104738] bio: create slab <bio-0> at 0
[ 0.104795] ACPI: Added _OSI(Module Device)
[ 0.104795] ACPI: Added _OSI(Processor Device)
[ 0.104796] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.104797] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.106248] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.117480] ACPI: SSDT 00000000ddb2e018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.117653] ACPI: Dynamic OEM Table Load:
[ 0.117654] ACPI: SSDT (null) 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.129385] ACPI: SSDT 00000000ddb2fa98 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.129572] ACPI: Dynamic OEM Table Load:
[ 0.129573] ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.141306] ACPI: SSDT 00000000ddb30c18 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.141474] ACPI: Dynamic OEM Table Load:
[ 0.141475] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.153568] ACPI: Interpreter enabled
[ 0.153572] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.153574] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.153581] ACPI: (supports S0 S3 S4 S5)
[ 0.153582] ACPI: Using IOAPIC for interrupt routing
[ 0.153596] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.153680] ACPI: No dock devices found.
[ 0.157268] ACPI: Power Resource [FN00] (off)
[ 0.157312] ACPI: Power Resource [FN01] (off)
[ 0.157353] ACPI: Power Resource [FN02] (off)
[ 0.157393] ACPI: Power Resource [FN03] (off)
[ 0.157434] ACPI: Power Resource [FN04] (off)
[ 0.157739] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.157742] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.157862] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.157934] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.158286] PCI host bridge to bus 0000:00
[ 0.158287] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.158288] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.158289] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.158290] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.158291] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.158292] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.158293] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.158294] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.158294] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.158295] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.158296] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff]
[ 0.158300] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
[ 0.158353] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.158371] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.158399] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.158437] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.158455] pci 0000:00:14.0: reg 0x10: [mem 0xf7200000-0xf720ffff 64bit]
[ 0.158515] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.158545] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.158565] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.158585] pci 0000:00:16.0: reg 0x10: [mem 0xf7219000-0xf721900f 64bit]
[ 0.158650] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.158708] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.158725] pci 0000:00:1a.0: reg 0x10: [mem 0xf7217000-0xf72173ff]
[ 0.158802] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.158842] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.158864] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.158875] pci 0000:00:1b.0: reg 0x10: [mem 0xf7210000-0xf7213fff 64bit]
[ 0.158931] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.158964] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.158982] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.159048] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.159082] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.159101] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.159167] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.159201] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.159228] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.159245] pci 0000:00:1d.0: reg 0x10: [mem 0xf7216000-0xf72163ff]
[ 0.159323] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.159362] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.159382] pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100
[ 0.159519] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
[ 0.159533] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
[ 0.159538] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
[ 0.159544] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
[ 0.159550] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
[ 0.159555] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
[ 0.159561] pci 0000:00:1f.2: reg 0x24: [mem 0xf7215000-0xf72157ff]
[ 0.159597] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.159640] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.159652] pci 0000:00:1f.3: reg 0x10: [mem 0xf7214000-0xf72140ff 64bit]
[ 0.159669] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.159749] pci 0000:01:00.0: [10de:1187] type 00 class 0x030000
[ 0.159756] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.159764] pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
[ 0.159771] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.159776] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.159781] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.159833] pci 0000:01:00.1: [10de:0e0a] type 00 class 0x040300
[ 0.159840] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[ 0.165269] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.165270] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.165272] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.165274] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 0.165319] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.165392] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[ 0.165409] pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.165440] pci 0000:03:00.0: reg 0x18: [mem 0xf7104000-0xf7104fff 64bit pref]
[ 0.165459] pci 0000:03:00.0: reg 0x20: [mem 0xf7100000-0xf7103fff 64bit pref]
[ 0.165542] pci 0000:03:00.0: supports D1 D2
[ 0.165543] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.165575] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.173270] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.173272] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 0.173275] pci 0000:00:1c.1: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.173293] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.173525] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.173554] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.173582] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.173609] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.173637] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.173664] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.173692] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.173719] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.173835] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.173839] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.173867] Found 1 acpi root devices
[ 0.173909] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.173910] vgaarb: loaded
[ 0.173910] vgaarb: bridge control possible 0000:01:00.0
[ 0.173928] PCI: Using ACPI for IRQ routing
[ 0.175232] PCI: pci_cache_line_size set to 64 bytes
[ 0.175262] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.175262] e820: reserve RAM buffer [mem 0xdd701000-0xdfffffff]
[ 0.175263] e820: reserve RAM buffer [mem 0xddc0c000-0xdfffffff]
[ 0.175264] e820: reserve RAM buffer [mem 0xdedca000-0xdfffffff]
[ 0.175265] e820: reserve RAM buffer [mem 0xdf233000-0xdfffffff]
[ 0.175266] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
[ 0.175267] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
[ 0.175320] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.175322] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.177333] Switched to clocksource hpet
[ 0.178130] pnp: PnP ACPI init
[ 0.178135] ACPI: bus type PNP registered
[ 0.178166] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.178167] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.178173] pnp 00:01: [dma 4]
[ 0.178181] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.178190] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.178237] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.178256] system 00:04: [io 0x0680-0x069f] has been reserved
[ 0.178257] system 00:04: [io 0x1000-0x100f] has been reserved
[ 0.178258] system 00:04: [io 0xffff] has been reserved
[ 0.178259] system 00:04: [io 0xffff] has been reserved
[ 0.178261] system 00:04: [io 0x0400-0x0453] could not be reserved
[ 0.178262] system 00:04: [io 0x0458-0x047f] has been reserved
[ 0.178263] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.178264] system 00:04: [io 0x164e-0x164f] has been reserved
[ 0.178265] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.178279] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.178301] system 00:06: [io 0x0454-0x0457] has been reserved
[ 0.178302] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.178399] system 00:07: [io 0x0a00-0x0a0f] has been reserved
[ 0.178401] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.178489] pnp 00:08: [dma 0 disabled]
[ 0.178512] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.178535] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.178536] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.178549] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.178675] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.178676] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.178677] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.178678] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.178680] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.178681] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.178682] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.178683] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.178684] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
[ 0.178685] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.178686] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.178755] pnp: PnP ACPI: found 12 devices
[ 0.178755] ACPI: bus type PNP unregistered
[ 0.184045] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.184047] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.184048] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.184050] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 0.184051] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.184060] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.184062] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff]
[ 0.184065] pci 0000:00:1c.1: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.184072] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.184073] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.184073] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.184074] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.184075] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.184076] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.184077] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 0.184078] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.184078] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.184079] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff]
[ 0.184080] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.184081] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.184082] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 0.184083] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.184083] pci_bus 0000:03: resource 1 [mem 0xf7100000-0xf71fffff]
[ 0.184117] NET: Registered protocol family 2
[ 0.184219] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.184302] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.184391] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.184401] TCP: reno registered
[ 0.184407] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.184425] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.184473] NET: Registered protocol family 1
[ 0.184765] pci 0000:01:00.0: Boot video device
[ 0.184775] PCI: CLS 64 bytes, default 64
[ 0.184799] Unpacking initramfs...
[ 0.310911] Freeing initrd memory: 12604K (ffff880036752000 - ffff8800373a1000)
[ 0.310916] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.310917] software IO TLB [mem 0xd9701000-0xdd701000] (64MB) mapped at [ffff8800d9701000-ffff8800dd700fff]
[ 0.311054] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x17
[ 0.311058] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x17
[ 0.311061] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x17
[ 0.311064] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x17
[ 0.311102] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.311231] audit: initializing netlink socket (disabled)
[ 0.311239] type=2000 audit(1397248531.304:1): initialized
[ 0.318536] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.318876] VFS: Disk quotas dquot_6.5.2
[ 0.318889] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.318930] msgmni has been set to 15898
[ 0.319106] alg: No test for stdrng (krng)
[ 0.319121] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.319143] io scheduler noop registered
[ 0.319143] io scheduler deadline registered
[ 0.319154] io scheduler cfq registered (default)
[ 0.319262] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.319436] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.319443] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.319457] intel_idle: MWAIT substates: 0x1120
[ 0.319458] intel_idle: v0.4 model 0x3A
[ 0.319458] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.319520] GHES: HEST is not enabled!
[ 0.319545] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.339918] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.340202] Linux agpgart interface v0.103
[ 0.340242] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.340571] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.340574] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.340676] mousedev: PS/2 mouse device common for all mice
[ 0.340701] rtc_cmos 00:05: RTC can wake from S4
[ 0.340820] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.340843] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.340848] Intel P-state driver initializing.
[ 0.340854] Intel pstate controlling: cpu 0
[ 0.340861] Intel pstate controlling: cpu 1
[ 0.340867] Intel pstate controlling: cpu 2
[ 0.340872] Intel pstate controlling: cpu 3
[ 0.340883] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 0.340884] AMD IOMMUv2 functionality not available on this system
[ 0.340935] TCP: cubic registered
[ 0.340985] NET: Registered protocol family 10
[ 0.341084] mip6: Mobile IPv6
[ 0.341086] NET: Registered protocol family 17
[ 0.341087] mpls_gso: MPLS GSO support
[ 0.341216] registered taskstats version 1
[ 0.341646] rtc_cmos 00:05: setting system clock to 2014-04-11 20:35:31 UTC (1397248531)
[ 0.341668] PM: Hibernation image not present or could not be loaded.
[ 0.341973] Freeing unused kernel memory: 988K (ffffffff818af000 - ffffffff819a6000)
[ 0.341973] Write protecting the kernel read-only data: 8192k
[ 0.343480] Freeing unused kernel memory: 1324K (ffff8800014b5000 - ffff880001600000)
[ 0.344082] Freeing unused kernel memory: 428K (ffff880001795000 - ffff880001800000)
[ 0.350295] systemd-udevd[67]: starting version 204
[ 0.359375] ACPI: bus type USB registered
[ 0.359389] usbcore: registered new interface driver usbfs
[ 0.359393] usbcore: registered new interface driver hub
[ 0.359624] usbcore: registered new device driver usb
[ 0.359843] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.359925] ehci-pci: EHCI PCI platform driver
[ 0.360024] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.360027] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.360037] ehci-pci 0000:00:1a.0: debug port 2
[ 0.363937] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.363983] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7217000
[ 0.370428] SCSI subsystem initialized
[ 0.371122] libata version 3.00 loaded.
[ 0.373237] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.373279] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.373281] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.373282] usb usb1: Product: EHCI Host Controller
[ 0.373282] usb usb1: Manufacturer: Linux 3.13-1-amd64 ehci_hcd
[ 0.373283] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.373791] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.373797] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 0.381469] hub 1-0:1.0: USB hub found
[ 0.381474] hub 1-0:1.0: 2 ports detected
[ 0.381521] r8169 0000:03:00.0: irq 41 for MSI/MSI-X
[ 0.381648] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc90004e10000, d4:3d:7e:b4:62:f8, XID 0c900800 IRQ 41
[ 0.381649] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 0.381727] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.381729] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.381735] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.381738] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.381748] ehci-pci 0000:00:1d.0: debug port 2
[ 0.381825] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.381826] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.385248] ACPI: Fan [FAN0] (off)
[ 0.385268] ACPI: Fan [FAN1] (off)
[ 0.385289] ACPI: Fan [FAN2] (off)
[ 0.385306] ACPI: Fan [FAN3] (off)
[ 0.385320] ACPI: Fan [FAN4] (off)
[ 0.385623] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.385713] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7216000
[ 0.397225] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.397242] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.397243] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.397244] usb usb2: Product: EHCI Host Controller
[ 0.397245] usb usb2: Manufacturer: Linux 3.13-1-amd64 ehci_hcd
[ 0.397245] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.397305] hub 2-0:1.0: USB hub found
[ 0.397309] hub 2-0:1.0: 2 ports detected
[ 0.397433] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.397436] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.397514] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.397527] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
[ 0.397616] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.397618] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.397618] usb usb3: Product: xHCI Host Controller
[ 0.397619] usb usb3: Manufacturer: Linux 3.13-1-amd64 xhci_hcd
[ 0.397620] usb usb3: SerialNumber: 0000:00:14.0
[ 0.397695] hub 3-0:1.0: USB hub found
[ 0.397724] hub 3-0:1.0: 4 ports detected
[ 0.397936] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.397939] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.397994] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.397995] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.397996] usb usb4: Product: xHCI Host Controller
[ 0.397997] usb usb4: Manufacturer: Linux 3.13-1-amd64 xhci_hcd
[ 0.397997] usb usb4: SerialNumber: 0000:00:14.0
[ 0.398045] hub 4-0:1.0: USB hub found
[ 0.398051] hub 4-0:1.0: 4 ports detected
[ 0.417218] ahci 0000:00:1f.2: version 3.0
[ 0.417284] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 0.433233] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
[ 0.433239] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 0.449690] scsi0 : ahci
[ 0.449896] scsi1 : ahci
[ 0.450046] scsi2 : ahci
[ 0.450171] scsi3 : ahci
[ 0.450297] scsi4 : ahci
[ 0.450394] scsi5 : ahci
[ 0.450424] ata1: SATA max UDMA/133 abar m2048@0xf7215000 port 0xf7215100 irq 43
[ 0.450426] ata2: SATA max UDMA/133 abar m2048@0xf7215000 port 0xf7215180 irq 43
[ 0.450427] ata3: SATA max UDMA/133 abar m2048@0xf7215000 port 0xf7215200 irq 43
[ 0.450428] ata4: DUMMY
[ 0.450428] ata5: DUMMY
[ 0.450429] ata6: DUMMY
[ 0.693118] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.769048] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.769071] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.769093] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.769842] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
[ 0.769848] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff880215cb5920), AE_NOT_FOUND (20131115/psparse-536)
[ 0.769892] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
[ 0.769898] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff880215cb58a8), AE_NOT_FOUND (20131115/psparse-536)
[ 0.770006] ata1.00: ATA-8: WDC WD10EZEX-00RKKA0, 80.00A80, max UDMA/133
[ 0.770018] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.770034] ata2.00: ATA-9: WDC WD10EZEX-60ZF5A0, 80.00A80, max UDMA/100
[ 0.770037] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.770273] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
[ 0.770279] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff880215cb5830), AE_NOT_FOUND (20131115/psparse-536)
[ 0.770286] ata3.00: ATAPI: HL-DT-STDVD-RAM GH22LS30, 1.01, max UDMA/100
[ 0.770863] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
[ 0.770868] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node ffff880215cb5920), AE_NOT_FOUND (20131115/psparse-536)
[ 0.770913] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
[ 0.770919] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff880215cb58a8), AE_NOT_FOUND (20131115/psparse-536)
[ 0.771339] ata1.00: configured for UDMA/133
[ 0.771529] scsi 0:0:0:0: Direct-Access ATA WDC WD10EZEX-00R 80.0 PQ: 0 ANSI: 5
[ 0.771718] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
[ 0.771725] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT2._GTF] (Node ffff880215cb5830), AE_NOT_FOUND (20131115/psparse-536)
[ 0.771736] ata3.00: configured for UDMA/100
[ 0.771747] ata2.00: configured for UDMA/100
[ 0.771928] scsi 1:0:0:0: Direct-Access ATA WDC WD10EZEX-60Z 80.0 PQ: 0 ANSI: 5
[ 0.773323] scsi 2:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22LS30 1.01 PQ: 0 ANSI: 5
[ 0.778074] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 0.778077] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 0.778092] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 0.778094] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 0.778154] sd 0:0:0:0: [sda] Write Protect is off
[ 0.778157] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.778158] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.778159] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.778172] sd 1:0:0:0: [sdb] Write Protect is off
[ 0.778175] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.778184] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.778197] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.778268] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 0.779401] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.779456] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 0.779487] sr 2:0:0:0: Attached scsi generic sg2 type 5
[ 0.805437] sda: sda1 sda2
[ 0.806057] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.822011] sdb: sdb1 sdb2 < sdb5 sdb6 >
[ 0.822910] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 0.825299] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 0.825312] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.825556] hub 1-1:1.0: USB hub found
[ 0.825639] hub 1-1:1.0: 6 ports detected
[ 0.936931] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.069279] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.069292] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.069535] hub 2-1:1.0: USB hub found
[ 1.069632] hub 2-1:1.0: 8 ports detected
[ 1.140818] usb 1-1.5: new full-speed USB device number 3 using ehci-pci
[ 1.146988] PM: Starting manual resume from disk
[ 1.146991] PM: Hibernation image partition 8:21 present
[ 1.146992] PM: Looking for hibernation image.
[ 1.147140] PM: Image not found (code -22)
[ 1.147142] PM: Hibernation image not present or could not be loaded.
[ 1.191797] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.236637] usb 1-1.5: New USB device found, idVendor=1532, idProduct=0016
[ 1.236640] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.236642] usb 1-1.5: Product: Razer DeathAdder
[ 1.236643] usb 1-1.5: Manufacturer: Razer
[ 1.308711] tsc: Refined TSC clocksource calibration: 3400.024 MHz
[ 1.308869] usb 1-1.6: new low-speed USB device number 4 using ehci-pci
[ 1.407182] usb 1-1.6: New USB device found, idVendor=046d, idProduct=c312
[ 1.407186] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.407187] usb 1-1.6: Product: USB Multimedia Keyboard
[ 1.407189] usb 1-1.6: Manufacturer: BTC
[ 1.476749] usb 2-1.5: new high-speed USB device number 3 using ehci-pci
[ 1.586226] usb 2-1.5: New USB device found, idVendor=7392, idProduct=7711
[ 1.586230] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.586232] usb 2-1.5: Product: 802.11 n WLAN
[ 1.586234] usb 2-1.5: Manufacturer: Ralink
[ 1.586235] usb 2-1.5: SerialNumber: 1.0
[ 1.660683] usb 2-1.6: new high-speed USB device number 4 using ehci-pci
[ 1.765351] usb 2-1.6: New USB device found, idVendor=13fe, idProduct=4200
[ 1.765354] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.765356] usb 2-1.6: Product: GOODRAM 4GB
[ 1.765358] usb 2-1.6: Manufacturer: Wilk
[ 1.765359] usb 2-1.6: SerialNumber: 07073B5767B2A197
[ 1.796826] systemd-udevd[369]: starting version 204
[ 1.862291] random: nonblocking pool is initialized
[ 2.161749] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 2.161755] ACPI: Power Button [PWRB]
[ 2.161783] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 2.161785] ACPI: Power Button [PWRF]
[ 2.197206] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[ 2.197211] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.197214] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 2.197216] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.197217] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
[ 2.197219] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.197220] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.200999] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
[ 2.267133] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 2.272010] wmi: Mapper loaded
[ 2.293419] usb-storage 2-1.6:1.0: USB Mass Storage device detected
[ 2.293537] scsi6 : usb-storage 2-1.6:1.0
[ 2.293568] usbcore: registered new interface driver usb-storage
[ 2.294623] ACPI Warning: 0x000000000000f000-0x000000000000f01f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20131115/utaddress-251)
[ 2.294627] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.308165] Switched to clocksource tsc
[ 2.310978] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.513908] [drm] Initialized drm 1.1.0 20060810
[ 2.521694] usbcore: registered new interface driver usbhid
[ 2.521695] usbhid: USB HID core driver
[ 2.523566] cfg80211: Calling CRDA to update world regulatory domain
[ 2.575613] MXM: GUID detected in BIOS
[ 2.575832] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0e4070a2
[ 2.575833] nouveau [ DEVICE][0000:01:00.0] Chipset: GK104 (NVE4)
[ 2.575834] nouveau [ DEVICE][0000:01:00.0] Family : NVE0
[ 2.576897] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 2.576901] nouveau [ VBIOS][0000:01:00.0] ... signature not found
[ 2.576902] nouveau [ VBIOS][0000:01:00.0] checking PROM for image...
[ 2.660069] usb 2-1.5: reset high-speed USB device number 3 using ehci-pci
[ 2.674821] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 2.674822] nouveau [ VBIOS][0000:01:00.0] using image from PROM
[ 2.674883] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 2.674884] nouveau [ VBIOS][0000:01:00.0] version 80.04.bf.00.63
[ 2.675043] nouveau 0000:01:00.0: irq 45 for MSI/MSI-X
[ 2.675051] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
[ 2.675075] nouveau [ PFB][0000:01:00.0] RAM type: GDDR5
[ 2.675076] nouveau [ PFB][0000:01:00.0] RAM size: 2048 MiB
[ 2.675077] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
[ 2.678749] nouveau [ VOLT][0000:01:00.0] GPU voltage: 875000uv
[ 2.701480] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 2.701484] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 2.701485] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 2.701508] nouveau [ CLK][0000:01:00.0] 07: core 405 MHz memory 324 MHz
[ 2.701539] nouveau [ CLK][0000:01:00.0] 0a: core 405-967 MHz memory 810 MHz
[ 2.701595] nouveau [ CLK][0000:01:00.0] 0e: core 405-1306 MHz memory 3004 MHz
[ 2.701663] nouveau [ CLK][0000:01:00.0] 0f: core 405-1306 MHz memory 3004 MHz
[ 2.701728] nouveau [ CLK][0000:01:00.0] --: core 405 MHz memory 324 MHz
[ 2.710267] iTCO_vendor_support: vendor-support=0
[ 2.712686] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 2.712704] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 2.712759] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.722114] [TTM] Zone kernel: Available graphics memory: 4071468 kiB
[ 2.722115] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 2.722115] [TTM] Initializing pool allocator
[ 2.722118] [TTM] Initializing DMA pool allocator
[ 2.722123] nouveau [ DRM] VRAM: 2048 MiB
[ 2.722124] nouveau [ DRM] GART: 1048576 MiB
[ 2.722126] nouveau [ DRM] TMDS table version 2.0
[ 2.722127] nouveau [ DRM] DCB version 4.0
[ 2.722128] nouveau [ DRM] DCB outp 00: 01000f02 00020030
[ 2.722129] nouveau [ DRM] DCB outp 01: 02000f00 00000000
[ 2.722130] nouveau [ DRM] DCB outp 02: 08011f82 00020030
[ 2.722131] nouveau [ DRM] DCB outp 03: 02022f62 00020010
[ 2.722131] nouveau [ DRM] DCB outp 04: 04833fb6 0f420010
[ 2.722132] nouveau [ DRM] DCB outp 05: 04033f72 00020010
[ 2.722133] nouveau [ DRM] DCB conn 00: 00001030
[ 2.722134] nouveau [ DRM] DCB conn 01: 00020131
[ 2.722135] nouveau [ DRM] DCB conn 02: 00010261
[ 2.722135] nouveau [ DRM] DCB conn 03: 00002346
[ 2.722919] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.722920] [drm] No driver support for vblank timestamp query.
[ 2.731651] nouveau [ DRM] MM: using COPY for buffer copies
[ 2.762362] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[ 2.790596] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected
[ 2.799275] nouveau [ DRM] allocated 1920x1080 fb: 0x80000, bo ffff880215704c00
[ 2.799316] fbcon: nouveaufb (fb0) is primary device
[ 2.833030] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 2.848244] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 2.871101] alg: No test for crc32 (crc32-pclmul)
[ 2.885848] Console: switching to colour frame buffer device 240x67
[ 2.886701] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 2.886702] nouveau 0000:01:00.0: registered panic notifier
[ 2.886705] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
[ 2.887702] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 2.887830] usbcore: registered new interface driver rt2800usb
[ 2.894056] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 2.894086] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 2.894111] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 2.894135] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 2.894157] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 2.894180] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 2.894202] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 2.894224] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 2.894363] hda_intel: Disabling MSI
[ 2.894366] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 2.906521] input: Razer Razer DeathAdder as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input14
[ 2.906561] hid-generic 0003:1532:0016.0001: input,hidraw0: USB HID v1.11 Mouse [Razer Razer DeathAdder] on usb-0000:00:1a.0-1.5/input0
[ 2.906630] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input15
[ 2.906660] hid-generic 0003:046D:C312.0002: input,hidraw1: USB HID v1.10 Keyboard [BTC USB Multimedia Keyboard] on usb-0000:00:1a.0-1.6/input0
[ 2.908920] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/input/input16
[ 2.908960] hid-generic 0003:046D:C312.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:1a.0-1.6/input1
[ 3.194222] cfg80211: World regulatory domain updated:
[ 3.194226] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3.194227] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 3.194228] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 3.194230] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[ 3.194231] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 3.194232] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 3.194233] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[ 3.293494] scsi 6:0:0:0: Direct-Access Wilk GOODRAM 4GB PMAP PQ: 0 ANSI: 6
[ 3.293717] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 3.297241] sd 6:0:0:0: [sdc] 7815168 512-byte logical blocks: (4.00 GB/3.72 GiB)
[ 3.299741] sd 6:0:0:0: [sdc] Write Protect is off
[ 3.299744] sd 6:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 3.301595] sd 6:0:0:0: [sdc] No Caching mode page found
[ 3.301608] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 3.311229] sd 6:0:0:0: [sdc] No Caching mode page found
[ 3.311238] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 3.313864] sdc: sdc1
[ 3.323957] sd 6:0:0:0: [sdc] No Caching mode page found
[ 3.323965] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 3.323970] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 3.367569] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input20
[ 3.367700] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input19
[ 3.367848] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input18
[ 3.367995] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[ 3.390299] intel_rapl: domain uncore energy ctr 0:0 not working, skip
[ 4.072399] Adding 16666620k swap on /dev/sdb5. Priority:-1 extents:1 across:16666620k
[ 4.090380] EXT4-fs (sdb1): re-mounted. Opts: (null)
[ 4.325993] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[ 4.746769] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null)
[ 5.197479] RPC: Registered named UNIX socket transport module.
[ 5.197481] RPC: Registered udp transport module.
[ 5.197482] RPC: Registered tcp transport module.
[ 5.197483] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 5.208004] FS-Cache: Loaded
[ 5.229569] FS-Cache: Netfs 'nfs' registered for caching
[ 5.255456] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 7.509412] systemd-logind[2281]: New seat seat0.
[ 7.509822] systemd-logind[2281]: Watching system buttons on /dev/input/event1 (Power Button)
[ 7.509881] systemd-logind[2281]: Watching system buttons on /dev/input/event0 (Power Button)
[ 7.565583] r8169 0000:03:00.0: firmware: failed to load rtl_nic/rtl8168e-3.fw (-2)
[ 7.565587] r8169 0000:03:00.0: Direct firmware load failed with error -2
[ 7.565588] r8169 0000:03:00.0: Falling back to user helper
[ 7.565977] r8169 0000:03:00.0 eth0: unable to load firmware patch rtl_nic/rtl8168e-3.fw (-2)
[ 7.579124] r8169 0000:03:00.0 eth0: link down
[ 7.579157] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.580645] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 7.615401] rt2800usb 2-1.5:1.0: firmware: direct-loading firmware rt2870.bin
[ 7.615406] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[ 7.902868] systemd-logind[2281]: New session c1 of user lightdm.
[ 7.902942] systemd-logind[2281]: Linked /tmp/.X11-unix/X0 to /run/user/106/X11-display.
[ 7.956729] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 33.713097] systemd-logind[2281]: New session 1 of user demiu.
[ 33.713173] systemd-logind[2281]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
[ 99.912786] usb 2-1.5: USB disconnect, device number 3
[ 101.510681] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0xffffffff]
[ 101.854570] usb 2-1.5: new high-speed USB device number 5 using ehci-pci
[ 101.964126] usb 2-1.5: New USB device found, idVendor=7392, idProduct=7711
[ 101.964131] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 101.964133] usb 2-1.5: Product: 802.11 n WLAN
[ 101.964135] usb 2-1.5: Manufacturer: Ralink
[ 101.964137] usb 2-1.5: SerialNumber: 1.0
[ 102.038462] usb 2-1.5: reset high-speed USB device number 5 using ehci-pci
[ 102.141154] ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[ 102.169213] ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 0005 detected
[ 102.169554] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 102.177021] ieee80211 phy1: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 102.177042] rt2800usb 2-1.5:1.0: firmware: direct-loading firmware rt2870.bin
[ 102.177046] ieee80211 phy1: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[ 102.517802] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not readyNie wiem co jest nie tak. Może zamienisz network-managera na coś innego: https://wiki.debian.org/WiFi/HowToUse