Niedzia - Polskie Forum Użytkowników Debiana

Niedzia

ODPOWIEDZ

Posty: 13

PiotrQ: Posty: 7; Rejestracja: 03 marca 2014, 14:40

Niedziałające wifi z lenovo b5400

Cytuj

Post autor: PiotrQ » 06 marca 2014, 23:43

Dzisiaj chciałem zainstalować na lapku mojej dziewczyny linuxa (najpierw minta potem debiana jessie) ale wogóle nie chce się uruchomić karta wifi.

Model w tym laptopie to realtek rtl8723. Próbowałem już sposobów z tej str http://askubuntu.com/questions/139632/w ... recognized jak i instalowałem pakiet firmware-realtek. Wszystko zakończyło się fiaskiem aż straciłem cierpliwość do tego systemu. W między czasie w googlach znalazłem info że niby ten konkretny model karty nie jest jeszcze wspierany w linuxie i trzeba czekać. Ktoś ma pamysł jak uruchomić tego realteka?

Rafal_F: Moderator; Posty: 2350; Rejestracja: 29 sierpnia 2008, 16:45

Cytuj

Post autor: Rafal_F » 06 marca 2014, 23:56

Spróbuj zainstalować ten pakiet: https://packages.debian.org/wheezy-back ... re-realtek - dodaj backporty i zainstaluj przez apt-get/aptitude, albo ściągnij plik deb i zainstaluj:

Kod: Zaznacz cały

dpkg -i nazwa_pliku.deb

Jak nie zadziała uzupełnij informacje: threads/12771-Zakładając-temat-przeczyt ... #post81406

PiotrQ: Posty: 7; Rejestracja: 03 marca 2014, 14:40

Cytuj

Post autor: PiotrQ » 07 marca 2014, 10:22

Mam już zainstalowany ten pakiet z gałęzi testing i dalej nic. Jest w debianie prog podobny do tego z minta w którym można zainstalować sterowniki windowsowe do karty wifi?

uname -a

Kod: Zaznacz cały

Linux aga-lenovo 3.12-1-amd64 #1 SMP Debian 3.12.9-1 (2014-02-01) x86_64 GNU/Linux

dpkg --print-architecture

Kod: Zaznacz cały

amd64

lspci -k

Kod: Zaznacz cały

00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
        Subsystem: Lenovo Device 5024
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
        Subsystem: Lenovo Device 5024
        Kernel driver in use: i915
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
        Subsystem: Lenovo Device 5024
        Kernel driver in use: snd_hda_intel
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 04)
        Subsystem: Lenovo Device 5024
        Kernel driver in use: xhci_hcd
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
        Subsystem: Lenovo Device 5024
        Kernel driver in use: mei_me
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 04)
        Subsystem: Lenovo Device 5024
        Kernel driver in use: ehci-pci
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 04)
        Subsystem: Lenovo Device 5024
        Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d4)
        Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d4)
        Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 (rev d4)
        Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 04)
        Subsystem: Lenovo Device 5024
        Kernel driver in use: ehci-pci
00:1f.0 ISA bridge: Intel Corporation HM86 Express LPC Controller (rev 04)
        Subsystem: Lenovo Device 5024
        Kernel driver in use: lpc_ich
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 04)
        Subsystem: Lenovo Device 5024
        Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 04)
        Subsystem: Lenovo Device 5024
04:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter
        Subsystem: Lenovo Device b728
05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 10)
        Subsystem: Lenovo Device 5024
        Kernel driver in use: r8169

lspci -n

Kod: Zaznacz cały

00:00.0 0600: 8086:0c04 (rev 06)
00:02.0 0300: 8086:0416 (rev 06)
00:03.0 0403: 8086:0c0c (rev 06)
00:14.0 0c03: 8086:8c31 (rev 04)
00:16.0 0780: 8086:8c3a (rev 04)
00:1a.0 0c03: 8086:8c2d (rev 04)
00:1b.0 0403: 8086:8c20 (rev 04)
00:1c.0 0604: 8086:8c10 (rev d4)
00:1c.2 0604: 8086:8c14 (rev d4)
00:1c.3 0604: 8086:8c16 (rev d4)
00:1d.0 0c03: 8086:8c26 (rev 04)
00:1f.0 0601: 8086:8c49 (rev 04)
00:1f.2 0106: 8086:8c03 (rev 04)
00:1f.3 0c05: 8086:8c22 (rev 04)
04:00.0 0280: 10ec:b723
05:00.0 0200: 10ec:8168 (rev 10)

ifconfig -a

Kod: Zaznacz cały

eth0      Link encap:Ethernet  HWaddr c4:54:44:26:a9:99  
          inet addr:192.168.178.40  Bcast:192.168.178.255  Mask:255.255.255.0
          inet6 addr: fe80::c654:44ff:fe26:a999/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:5145 errors:0 dropped:0 overruns:0 frame:0
          TX packets:4035 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:5487442 (5.2 MiB)  TX bytes:530908 (518.4 KiB)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:122 errors:0 dropped:0 overruns:0 frame:0
          TX packets:122 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:9364 (9.1 KiB)  TX bytes:9364 (9.1 KiB)

iwconfig

Kod: Zaznacz cały

th0      no wireless extensions.

lo        no wireless extensions.

Jeszcze dorzucę wynik komendy lshw -c network

Kod: Zaznacz cały

*-network UNCLAIMED     
       description: Network controller
       product: RTL8723BE PCIe Wireless Network Adapter
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:04:00.0
       version: 00
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list
       configuration: latency=0
       resources: ioport:4000(size=256) memory:f0500000-f0503fff
  *-network
       description: Ethernet interface
       product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:05:00.0
       logical name: eth0
       version: 10
       serial: c4:54:44:26:a9:99
       size: 100Mbit/s
       capacity: 1Gbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168g-3_0.0.1 04/23/13 ip=192.168.178.40 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
       resources: irq:41 ioport:3000(size=256) memory:f0404000-f0404fff memory:f0400000-f0403fff

Rafal_F: Moderator; Posty: 2350; Rejestracja: 29 sierpnia 2008, 16:45

Cytuj

Post autor: Rafal_F » 07 marca 2014, 14:39

PiotrQ pisze:Jest w debianie prog podobny do tego z minta w którym można zainstalować sterowniki windowsowe do karty wifi?

Tak, ale to ostateczność. https://wiki.debian.org/NdisWrapper

Jest też natywny sterownik, ale nie dołączony do źródeł jądra, więc musisz go skompilować samemu:

Zainstaluj wymagane pakiety:

Kod: Zaznacz cały

aptitude isntall linux-headers-amd64 build-essential

Ściągnij i rozpakuj źródła: https://github.com/lwfinger/rtl8723be - po prawej stronie jest przycisk "Download ZIP".
Skompiluj źródła, w tym celu wejdź do katalogu ze źródłami i wydaj polecenie:
Kod: Zaznacz cały
```
make
```
Zainstaluj, jako root wpisz:
Kod: Zaznacz cały
```
make install
```
Pozostaje restart systemu, lub jako root wydaj polecenie:
Kod: Zaznacz cały
```
modprobe rtl8723be
```

Niestety po każdej aktualizacji jądra proces trzeba będzie powtarzać:

Kod: Zaznacz cały

$ make clean
$ make
# make install
# modprobe rtl8723be

LinXbro: Posty: 8; Rejestracja: 26 sierpnia 2008, 15:54

Cytuj

Post autor: LinXbro » 08 marca 2014, 13:37

Po wykonaniu czynności jak wyżej pojawia się komunikat :

Kod: Zaznacz cały

[INDENT]make -C /lib/modules/3.2.0-4-amd64/build M=/home/madixon/Pobrane/rtl8723be-master modules
make[1]: Wejście do katalogu `/usr/src/linux-headers-3.2.0-4-amd64'
  CC [M]  /home/madixon/Pobrane/rtl8723be-master/base.o
/home/madixon/Pobrane/rtl8723be-master/base.c: In function ‘rtl_beacon_statistic’:
/home/madixon/Pobrane/rtl8723be-master/base.c:1179:2: error: implicit declaration of function ‘ether_addr_equal’ [-Werror=implicit-function-declaration]
cc1: some warnings being treated as errors
make[4]: *** [/home/madixon/Pobrane/rtl8723be-master/base.o] Błąd 1
make[3]: *** [_module_/home/madixon/Pobrane/rtl8723be-master] Błąd 2
make[2]: *** [sub-make] Błąd 2
make[1]: *** [all] Błąd 2
make[1]: Opuszczenie katalogu `/usr/src/linux-headers-3.2.0-4-amd64'
make: *** [all] Błąd 2
[/INDENT]

Co teraz?
Co dalej bo już powoli tracę chęć do próby uruchominia WiFi

Rafal_F: Moderator; Posty: 2350; Rejestracja: 29 sierpnia 2008, 16:45

Cytuj

Post autor: Rafal_F » 08 marca 2014, 14:01

Tamte źródła zostały zmodyfikowane do działania z wersją jądra 3.14, i w rezultacie przestały się kompilować dla starszych wersji. Spróbuj z tym commitem: https://github.com/lwfinger/rtl8723be/t ... 81f8fc8b9b (kliknij w link po prawej stronie "Download ZIP).

LinXbro: Posty: 8; Rejestracja: 26 sierpnia 2008, 15:54

Cytuj

Post autor: LinXbro » 08 marca 2014, 16:14

Dzięki piękne powoli coś trybi Wicd reaguje na przycisk włącz/wyłącz Wifi jednak nie znajduje sieci bezprzewodowych :/ What now ?

Kod: Zaznacz cały

[INDENT]lo        no wireless extensions.

wlan0     IEEE 802.11bgn  ESSID :o ff/any  
          Mode:Managed  Access Point: Not-Associated   Tx-Power=off   
          Retry  long limit:7   RTS thr=2347 B   Fragment thr :o ff
          Encryption key :o ff
          Power Management :o n
          
eth0      no wireless extensions.
[/INDENT]

Rafal_F: Moderator; Posty: 2350; Rejestracja: 29 sierpnia 2008, 16:45

Cytuj

Post autor: Rafal_F » 08 marca 2014, 17:27

Spróbuj wpisać:

Kod: Zaznacz cały

iwconfig wlan0 txpower auto

Ewentualnie wklej wynik:

Kod: Zaznacz cały

dmesg

LinXbro: Posty: 8; Rejestracja: 26 sierpnia 2008, 15:54

Cytuj

Post autor: LinXbro » 08 marca 2014, 17:53

iwonfig wlan0 txpower auto - power 20dB

dmesg

Kod: Zaznacz cały

[INDENT][    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.54-2
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=UUID=624b0f9e-87eb-453d-8e12-d432017195ef ro quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009d000 (usable)
[    0.000000]  BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000d2386000 (usable)
[    0.000000]  BIOS-e820: 00000000d2386000 - 00000000dceef000 (reserved)
[    0.000000]  BIOS-e820: 00000000dceef000 - 00000000dcf9f000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000dcf9f000 - 00000000dcfff000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000dcfff000 - 00000000dfa00000 (reserved)
[    0.000000]  BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed08000 - 00000000fed09000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 000000021f600000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 20278  /20278  QB0, BIOS J7ET57WW (2.02 ) 11/07/2013
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x21f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00E0000000 mask 7FE0000000 uncachable
[    0.000000]   1 base 00DE000000 mask 7FFE000000 uncachable
[    0.000000]   2 base 00DD000000 mask 7FFF000000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] last_pfn = 0xd2386 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000f0100] f0100
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: 0000000000000000-00000000d2386000
[    0.000000]  0000000000 - 00c0000000 page 1G
[    0.000000]  00c0000000 - 00d2200000 page 2M
[    0.000000]  00d2200000 - 00d2386000 page 4k
[    0.000000] kernel direct mapping tables up to d2386000 @ 1fffd000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-000000021f600000
[    0.000000]  0100000000 - 0200000000 page 1G
[    0.000000]  0200000000 - 021f600000 page 2M
[    0.000000] kernel direct mapping tables up to 21f600000 @ d2384000-d2386000
[    0.000000] RAMDISK: 36bf0000 - 375f0000
[    0.000000] ACPI: RSDP 00000000000f0120 00024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 00000000dcffe170 000B4 (v01 LENOVO TP-J7    00002020 PTEC 00000002)
[    0.000000] ACPI: FACP 00000000dcffb000 0010C (v05 LENOVO TP-J7    00002020 PTEC 00000002)
[    0.000000] ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 268 to 244 (20110623/tbfadt-288)
[    0.000000] ACPI: DSDT 00000000dcfe7000 102D9 (v02 LENOVO  HSW-LPT 00000000 INTL 20120711)
[    0.000000] ACPI: FACS 00000000dcf97000 00040
[    0.000000] ACPI: ASF! 00000000dcffd000 000A5 (v32 LENOVO TP-J7    00002020 PTEC 00000002)
[    0.000000] ACPI: HPET 00000000dcffa000 00038 (v01 LENOVO TP-J7    00002020 PTEC 00000002)
[    0.000000] ACPI: APIC 00000000dcff9000 00098 (v01 LENOVO TP-J7    00002020 PTEC 00000002)
[    0.000000] ACPI: MCFG 00000000dcff8000 0003C (v01 LENOVO TP-J7    00002020 PTEC 00000002)
[    0.000000] ACPI: SSDT 00000000dcfe5000 01664 (v01 LENOVO PtidDevc 00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 00000000dcfe4000 004E1 (v01 LENOVO SataAhci 00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 00000000dcfe3000 00539 (v01 LENOVO  Cpu0Ist 00003000 INTL 20120711)
[    0.000000] ACPI: SSDT 00000000dcfe2000 00AD8 (v01 LENOVO    CpuPm 00003000 INTL 20120711)
[    0.000000] ACPI: SSDT 00000000dcfde000 0355E (v01 LENOVO  SaSsdt  00003000 INTL 20120711)
[    0.000000] ACPI: SSDT 00000000dcfdd000 0036F (v01 LENOVO CppcTabl 00001000 INTL 20120711)
[    0.000000] ACPI: PCCT 00000000dcfdc000 0006E (v05 LENOVO TP-J7    00002020 PTEC 00000002)
[    0.000000] ACPI: SSDT 00000000dcfdb000 00AC4 (v01 LENOVO Cpc_Tabl 00001000 INTL 20120711)
[    0.000000] ACPI: UEFI 00000000dcfda000 00042 (v01 LENOVO TP-J7    00002020 PTEC 00000002)
[    0.000000] ACPI: POAT 00000000dcf6f000 00055 (v03 LENOVO TP-J7    00002020 PTEC 00000002)
[    0.000000] ACPI: UEFI 00000000dcfd9000 0003E (v01 LENOVO TP-J7    00002020 PTEC 00000002)
[    0.000000] ACPI: FPDT 00000000dcfd8000 00064 (v01 LENOVO TP-J7    00002020 PTEC 00000002)
[    0.000000] ACPI: UEFI 00000000dcfd7000 002E2 (v01 LENOVO TP-J7    00002020 PTEC 00000002)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000021f600000
[    0.000000] Initmem setup node 0 0000000000000000-000000021f600000
[    0.000000]   NODE_DATA [000000021f5fb000 - 000000021f5fffff]
[    0.000000]  [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880216e00000-ffff88021ddfffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x0021f600
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x000d2386
[    0.000000]     0: 0x00100000 -> 0x0021f600
[    0.000000] On node 0 totalpages: 2038035
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3920 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 842686 pages, LIFO batch:31
[    0.000000]   Normal zone: 16093 pages used for memmap
[    0.000000]   Normal zone: 1160995 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 6 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000d2386000 - 00000000dceef000
[    0.000000] PM: Registered nosave memory: 00000000dceef000 - 00000000dcf9f000
[    0.000000] PM: Registered nosave memory: 00000000dcf9f000 - 00000000dcfff000
[    0.000000] PM: Registered nosave memory: 00000000dcfff000 - 00000000dfa00000
[    0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
[    0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[    0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000
[    0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
[    0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
[    0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[    0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffc00000
[    0.000000] PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at dfa00000 (gap: dfa00000:18600000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021f200000 s82944 r8192 d23552 u262144
[    0.000000] pcpu-alloc: s82944 r8192 d23552 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2007601
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=UUID=624b0f9e-87eb-453d-8e12-d432017195ef ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7951732k/8902656k available (3429k kernel code, 750516k absent, 200408k reserved, 3309k data, 576k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.004000] Detected 2294.986 MHz processor.
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.97 BogoMIPS (lpj=9179944)
[    0.000005] pid_max: default: 32768 minimum: 301
[    0.000036] Security Framework initialized
[    0.000039] AppArmor: AppArmor disabled by boot time parameter
[    0.000472] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.001852] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.002435] Mount-cache hash table entries: 256
[    0.002521] Initializing cgroup subsys cpuacct
[    0.002525] Initializing cgroup subsys memory
[    0.002534] Initializing cgroup subsys devices
[    0.002536] Initializing cgroup subsys freezer
[    0.002537] Initializing cgroup subsys net_cls
[    0.002539] Initializing cgroup subsys blkio
[    0.002544] Initializing cgroup subsys perf_event
[    0.002570] CPU: Physical Processor ID: 0
[    0.002571] CPU: Processor Core ID: 0
[    0.002575] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.002576] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.003494] mce: CPU supports 7 MCE banks
[    0.003503] CPU0: Thermal monitoring handled by SMI
[    0.003512] using mwait in idle threads.
[    0.003841] ACPI: Core revision 20110623
[    0.021769] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.061437] CPU0: Intel(R) Pentium(R) CPU 3550M @ 2.30GHz stepping 03
[    0.168719] Performance Events: no PEBS fmt2+, generic architected perfmon, Intel PMU driver.
[    0.168725] ... version:                3
[    0.168727] ... bit width:              48
[    0.168728] ... generic registers:      8
[    0.168729] ... value mask:             0000ffffffffffff
[    0.168730] ... max period:             000000007fffffff
[    0.168731] ... fixed-purpose events:   3
[    0.168732] ... event mask:             00000007000000ff
[    0.168850] NMI watchdog enabled, takes one hw-pmu counter.
[    0.168937] Booting Node   0, Processors  #1
[    0.168939] smpboot cpu 1: start_ip = 98000
[    0.257630] CPU1: Thermal monitoring handled by SMI
[    0.277749] NMI watchdog enabled, takes one hw-pmu counter.
[    0.277767] Brought up 2 CPUs
[    0.277769] Total of 2 processors activated (9179.36 BogoMIPS).
[    0.279117] devtmpfs: initialized
[    0.281349] PM: Registering ACPI NVS region at dceef000 (720896 bytes)
[    0.281477] print_constraints: dummy: 
[    0.281521] NET: Registered protocol family 16
[    0.281598] ACPI: bus type pci registered
[    0.281654] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.281656] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.285235] PCI: Using configuration type 1 for base access
[    0.285834] bio: create slab <bio-0> at 0
[    0.285911] ACPI: Added _OSI(Module Device)
[    0.285913] ACPI: Added _OSI(Processor Device)
[    0.285915] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.285916] ACPI: Added _OSI(Processor Aggregator Device)
[    0.287852] ACPI: EC: Look up EC in DSDT
[    0.289760] ACPI: Executed 1 blocks of module-level executable AML code
[    0.301898] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.312770] ACPI: SSDT 00000000dcedea18 00474 (v01  PmRef  Cpu0Cst 00003001 INTL 20120711)
[    0.313265] ACPI: Dynamic OEM Table Load:
[    0.313267] ACPI: SSDT           (null) 00474 (v01  PmRef  Cpu0Cst 00003001 INTL 20120711)
[    0.324892] ACPI: SSDT 00000000dcedf618 005AA (v01  PmRef    ApIst 00003000 INTL 20120711)
[    0.325469] ACPI: Dynamic OEM Table Load:
[    0.325470] ACPI: SSDT           (null) 005AA (v01  PmRef    ApIst 00003000 INTL 20120711)
[    0.336737] ACPI: SSDT 00000000dceddd98 00119 (v01  PmRef    ApCst 00003000 INTL 20120711)
[    0.337225] ACPI: Dynamic OEM Table Load:
[    0.337227] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20120711)
[    0.364220] ACPI: Interpreter enabled
[    0.364224] ACPI: (supports S0 S3 S4 S5)
[    0.364256] ACPI: Using IOAPIC for interrupt routing
[    0.386603] ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
[    0.386990] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[    0.386992] HEST: Table not found.
[    0.386995] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.387307] \_SB_.PCI0:_OSC invalid UUID
[    0.387308] _OSC request data:1 8 0 
[    0.387312] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.387839] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.387841] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.387843] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.387845] pci_root PNP0A08:00: host bridge window [mem 0xdfa00000-0xfeafffff]
[    0.387855] pci 0000:00:00.0: [8086:0c04] type 0 class 0x000600
[    0.387891] pci 0000:00:02.0: [8086:0406] type 0 class 0x000300
[    0.387902] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
[    0.387908] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.387912] pci 0000:00:02.0: reg 20: [io  0x5000-0x503f]
[    0.387944] pci 0000:00:03.0: [8086:0c0c] type 0 class 0x000403
[    0.387952] pci 0000:00:03.0: reg 10: [mem 0xf0610000-0xf0613fff 64bit]
[    0.388012] pci 0000:00:14.0: [8086:8c31] type 0 class 0x000c03
[    0.388031] pci 0000:00:14.0: reg 10: [mem 0xf0600000-0xf060ffff 64bit]
[    0.388091] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.388113] pci 0000:00:16.0: [8086:8c3a] type 0 class 0x000780
[    0.388133] pci 0000:00:16.0: reg 10: [mem 0xf0619000-0xf061900f 64bit]
[    0.388195] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.388228] pci 0000:00:1a.0: [8086:8c2d] type 0 class 0x000c03
[    0.388247] pci 0000:00:1a.0: reg 10: [mem 0xf061e000-0xf061e3ff]
[    0.388333] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.388360] pci 0000:00:1b.0: [8086:8c20] type 0 class 0x000403
[    0.388374] pci 0000:00:1b.0: reg 10: [mem 0xf0614000-0xf0617fff 64bit]
[    0.388438] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.388459] pci 0000:00:1c.0: [8086:8c10] type 1 class 0x000604
[    0.388524] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.388546] pci 0000:00:1c.2: [8086:8c14] type 1 class 0x000604
[    0.388617] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.388640] pci 0000:00:1c.3: [8086:8c16] type 1 class 0x000604
[    0.388704] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.388735] pci 0000:00:1d.0: [8086:8c26] type 0 class 0x000c03
[    0.388756] pci 0000:00:1d.0: reg 10: [mem 0xf061d000-0xf061d3ff]
[    0.388842] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.388868] pci 0000:00:1f.0: [8086:8c49] type 0 class 0x000601
[    0.388988] pci 0000:00:1f.2: [8086:8c03] type 0 class 0x000106
[    0.389003] pci 0000:00:1f.2: reg 10: [io  0x5088-0x508f]
[    0.389011] pci 0000:00:1f.2: reg 14: [io  0x5094-0x5097]
[    0.389019] pci 0000:00:1f.2: reg 18: [io  0x5080-0x5087]
[    0.389027] pci 0000:00:1f.2: reg 1c: [io  0x5090-0x5093]
[    0.389035] pci 0000:00:1f.2: reg 20: [io  0x5060-0x507f]
[    0.389043] pci 0000:00:1f.2: reg 24: [mem 0xf061c000-0xf061c7ff]
[    0.389079] pci 0000:00:1f.2: PME# supported from D3hot
[    0.389097] pci 0000:00:1f.3: [8086:8c22] type 0 class 0x000c05
[    0.389112] pci 0000:00:1f.3: reg 10: [mem 0xf0618000-0xf06180ff 64bit]
[    0.389132] pci 0000:00:1f.3: reg 20: [io  0xefa0-0xefbf]
[    0.389197] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.389274] pci 0000:04:00.0: [10ec:b723] type 0 class 0x000280
[    0.389301] pci 0000:04:00.0: reg 10: [io  0x4000-0x40ff]
[    0.389348] pci 0000:04:00.0: reg 18: [mem 0xf0500000-0xf0503fff 64bit]
[    0.389492] pci 0000:04:00.0: supports D1 D2
[    0.389493] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.396623] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[    0.396627] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.396631] pci 0000:00:1c.2:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.396692] pci 0000:05:00.0: [10ec:8168] type 0 class 0x000200
[    0.396709] pci 0000:05:00.0: reg 10: [io  0x3000-0x30ff]
[    0.396738] pci 0000:05:00.0: reg 18: [mem 0xf0404000-0xf0404fff 64bit]
[    0.396756] pci 0000:05:00.0: reg 20: [mem 0xf0400000-0xf0403fff 64bit]
[    0.396833] pci 0000:05:00.0: supports D1 D2
[    0.396834] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.404611] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
[    0.404615] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
[    0.404619] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff]
[    0.404639] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.404764] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.404814] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    0.404864] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    0.404981] \_SB_.PCI0:_OSC invalid UUID
[    0.404982] _OSC request data:1 1f 0 
[    0.404985]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.405027] \_SB_.PCI0:_OSC invalid UUID
[    0.405028] _OSC request data:1 0 1d 
[    0.405031]  pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[    0.405032] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.410287] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.410328] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.410369] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.410407] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *7
[    0.410445] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.410484] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.410522] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.410560] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.410643] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.410649] vgaarb: loaded
[    0.410651] vgaarb: bridge control possible 0000:00:02.0
[    0.410681] PCI: Using ACPI for IRQ routing
[    0.412074] PCI: pci_cache_line_size set to 64 bytes
[    0.412149] reserve RAM buffer: 000000000009d000 - 000000000009ffff 
[    0.412151] reserve RAM buffer: 00000000d2386000 - 00000000d3ffffff 
[    0.412153] reserve RAM buffer: 000000021f600000 - 000000021fffffff 
[    0.412245] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.412250] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.414265] Switching to clocksource hpet
[    0.415686] pnp: PnP ACPI init
[    0.415695] ACPI: bus type pnp registered
[    0.415971] pnp 00:00: [bus 00-3e]
[    0.415973] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.415975] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.415977] pnp 00:00: [io  0x0d00-0xffff window]
[    0.415978] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.415980] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.415982] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.415983] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.415985] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.415987] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.415988] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.415990] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.415991] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.415993] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.415994] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.415996] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.415998] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.415999] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    0.416001] pnp 00:00: [mem 0xdfa00000-0xfeafffff window]
[    0.416054] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.416064] pnp 00:01: [io  0x0060]
[    0.416066] pnp 00:01: [io  0x0064]
[    0.416073] pnp 00:01: [irq 1]
[    0.416092] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.416102] pnp 00:02: [irq 12]
[    0.416119] pnp 00:02: Plug and Play ACPI device, IDs SYN2a14 SYN2a00 PNP0f13 (active)
[    0.416232] pnp 00:03: [mem 0xfed1c000-0xfed1ffff]
[    0.416234] pnp 00:03: [mem 0xfed10000-0xfed17fff]
[    0.416235] pnp 00:03: [mem 0xfed18000-0xfed18fff]
[    0.416237] pnp 00:03: [mem 0xfed19000-0xfed19fff]
[    0.416238] pnp 00:03: [mem 0xf8000000-0xfbffffff]
[    0.416240] pnp 00:03: [mem 0xfed20000-0xfed3ffff]
[    0.416241] pnp 00:03: [mem 0xfed90000-0xfed93fff]
[    0.416243] pnp 00:03: [mem 0xfed45000-0xfed8ffff]
[    0.416245] pnp 00:03: [mem 0xff000000-0xffffffff]
[    0.416246] pnp 00:03: [mem 0xfee00000-0xfeefffff]
[    0.416248] pnp 00:03: [mem 0x00000000-0xffffffffffffffff disabled]
[    0.416250] pnp 00:03: [mem 0xdfa10000-0xdfa1ffff]
[    0.416283] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.416285] system 00:03: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.416287] system 00:03: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.416289] system 00:03: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.416291] system 00:03: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.416293] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.416295] system 00:03: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.416298] system 00:03: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.416300] system 00:03: [mem 0xff000000-0xffffffff] could not be reserved
[    0.416302] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.416304] system 00:03: [mem 0xdfa10000-0xdfa1ffff] has been reserved
[    0.416306] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.420296] pnp: PnP ACPI: found 4 devices
[    0.420297] ACPI: ACPI bus type pnp unregistered
[    0.426414] PCI: max bus depth: 1 pci_try_num: 2
[    0.426440] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.426451] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[    0.426454] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.426460] pci 0000:00:1c.2:   bridge window [mem 0xf0500000-0xf05fffff]
[    0.426467] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
[    0.426471] pci 0000:00:1c.3:   bridge window [io  0x3000-0x3fff]
[    0.426475] pci 0000:00:1c.3:   bridge window [mem 0xf0400000-0xf04fffff]
[    0.426496] pci 0000:00:1c.0: setting latency timer to 64
[    0.426506] pci 0000:00:1c.2: setting latency timer to 64
[    0.426516] pci 0000:00:1c.3: setting latency timer to 64
[    0.426520] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.426522] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.426524] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.426525] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff]
[    0.426527] pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
[    0.426529] pci_bus 0000:04: resource 1 [mem 0xf0500000-0xf05fffff]
[    0.426531] pci_bus 0000:05: resource 0 [io  0x3000-0x3fff]
[    0.426532] pci_bus 0000:05: resource 1 [mem 0xf0400000-0xf04fffff]
[    0.426583] NET: Registered protocol family 2
[    0.426744] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.427422] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.428437] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.428559] TCP: Hash tables configured (established 524288 bind 65536)
[    0.428561] TCP reno registered
[    0.428575] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.428602] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.428700] NET: Registered protocol family 1
[    0.428710] pci 0000:00:02.0: Boot video device
[    0.429040] pci 0000:00:14.0: power state changed by ACPI to D0
[    0.429048] pci 0000:00:14.0: power state changed by ACPI to D0
[    0.429055] pci 0000:00:14.0: can't derive routing for PCI INT A
[    0.429056] pci 0000:00:14.0: PCI INT A: no GSI - using ISA IRQ 11
[    0.429106] pci 0000:00:14.0: can't derive routing for PCI INT A
[    0.429186] PCI: CLS 64 bytes, default 64
[    0.429223] Unpacking initramfs...
[    0.622396] Freeing initrd memory: 10240k freed
[    0.623352] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.623355] Placing 64MB software IO TLB between ffff8800ce384000 - ffff8800d2384000
[    0.623357] software IO TLB at phys 0xce384000 - 0xd2384000
[    0.623403] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.623696] audit: initializing netlink socket (disabled)
[    0.623704] type=2000 audit(1394291274.496:1): initialized
[    0.637067] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.637701] VFS: Disk quotas dquot_6.5.2
[    0.637725] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.637781] msgmni has been set to 15550
[    0.637905] alg: No test for stdrng (krng)
[    0.637928] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.637930] io scheduler noop registered
[    0.637932] io scheduler deadline registered
[    0.637946] io scheduler cfq registered (default)
[    0.638122] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.638147] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.638148] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.638595] intel_idle: does not run on family 6 model 60
[    0.638617] ERST: Table is not found!
[    0.638618] GHES: HEST is not enabled!
[    0.638660] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.686353] Linux agpgart interface v0.103
[    0.686431] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.700550] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.700554] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.700641] mousedev: PS/2 mouse device common for all mice
[    0.700731] rtc_cmos rtc_cmos: RTC can wake from S4
[    0.700827] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[    0.700852] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.700858] cpuidle: using governor ladder
[    0.700859] cpuidle: using governor menu
[    0.700988] TCP cubic registered
[    0.701034] NET: Registered protocol family 10
[    0.701351] Mobile IPv6
[    0.701353] NET: Registered protocol family 17
[    0.701356] Registering the dns_resolver key type
[    0.701448] PM: Hibernation image not present or could not be loaded.
[    0.701455] registered taskstats version 1
[    0.702053] rtc_cmos rtc_cmos: setting system clock to 2014-03-08 15:07:55 UTC (1394291275)
[    0.702102] Initializing network drop monitor service
[    0.702972] Freeing unused kernel memory: 576k freed
[    0.703031] Write protecting the kernel read-only data: 6144k
[    0.704917] Freeing unused kernel memory: 648k freed
[    0.706896] Freeing unused kernel memory: 688k freed
[    0.714682] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.715033] udevd[48]: starting version 175
[    0.739241] usbcore: registered new interface driver usbfs
[    0.739259] usbcore: registered new interface driver hub
[    0.744876] SCSI subsystem initialized
[    0.750523] usbcore: registered new device driver usb
[    0.750790] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.750825] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.750828] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    0.750849] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.750872] ehci_hcd 0000:00:1a.0: debug port 2
[    0.754135] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.754175] r8169 0000:05:00.0: (unregistered net_device): unknown MAC, using family default
[    0.754193] r8169 0000:05:00.0: setting latency timer to 64
[    0.754278] r8169 0000:05:00.0: irq 40 for MSI/MSI-X
[    0.754595] r8169 0000:05:00.0: eth0: RTL8168b/8111b at 0xffffc90000c7e000, c4:54:44:27:65:c6, XID 10900800 IRQ 40
[    0.754598] r8169 0000:05:00.0: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[    0.754763] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    0.754793] libata version 3.00 loaded.
[    0.762666] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf061e000
[    0.778073] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.778106] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.778108] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.778110] usb usb1: Product: EHCI Host Controller
[    0.778111] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[    0.778113] usb usb1: SerialNumber: 0000:00:1a.0
[    0.778216] hub 1-0:1.0: USB hub found
[    0.778222] hub 1-0:1.0: 3 ports detected
[    0.778308] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.778312] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    0.778318] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.778339] ehci_hcd 0000:00:1d.0: debug port 2
[    0.782214] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    0.782308] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf061d000
[    0.782914] thermal LNXTHERM:00: registered as thermal_zone0
[    0.782917] ACPI: Thermal Zone [TZ00] (52 C)
[    0.798066] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.798082] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.798084] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.798085] usb usb2: Product: EHCI Host Controller
[    0.798087] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[    0.798088] usb usb2: SerialNumber: 0000:00:1d.0
[    0.798174] hub 2-0:1.0: USB hub found
[    0.798177] hub 2-0:1.0: 3 ports detected
[    0.798245] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
[    0.798255] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0
[    0.798262] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[    0.798264] xhci_hcd 0000:00:14.0: PCI INT A: no GSI - using ISA IRQ 11
[    0.798294] xhci_hcd 0000:00:14.0: setting latency timer to 64
[    0.798297] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.798305] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    0.798394] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.798433] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
[    0.798473] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.798475] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.798476] usb usb3: Product: xHCI Host Controller
[    0.798478] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
[    0.798479] usb usb3: SerialNumber: 0000:00:14.0
[    0.798636] xHCI xhci_add_endpoint called for root hub
[    0.798637] xHCI xhci_check_bandwidth called for root hub
[    0.798663] hub 3-0:1.0: USB hub found
[    0.798678] hub 3-0:1.0: 14 ports detected
[    0.798759] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.798763] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    0.798781] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.798782] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.798784] usb usb4: Product: xHCI Host Controller
[    0.798785] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
[    0.798787] usb usb4: SerialNumber: 0000:00:14.0
[    0.798887] xHCI xhci_add_endpoint called for root hub
[    0.798888] xHCI xhci_check_bandwidth called for root hub
[    0.798908] hub 4-0:1.0: USB hub found
[    0.798918] hub 4-0:1.0: 4 ports detected
[    0.818071] ahci 0000:00:1f.2: version 3.0
[    0.818126] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[    0.818169] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x14 impl SATA mode
[    0.818172] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
[    0.818178] ahci 0000:00:1f.2: setting latency timer to 64
[    0.826384] scsi0 : ahci
[    0.826460] scsi1 : ahci
[    0.826504] scsi2 : ahci
[    0.826548] scsi3 : ahci
[    0.826592] scsi4 : ahci
[    0.826828] ata1: DUMMY
[    0.826830] ata2: DUMMY
[    0.826833] ata3: SATA max UDMA/133 abar m2048@0xf061c000 port 0xf061c200 irq 42
[    0.826834] ata4: DUMMY
[    0.826837] ata5: SATA max UDMA/133 abar m2048@0xf061c000 port 0xf061c300 irq 42
[    1.089903] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[    1.145879] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.145900] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.149664] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    1.149667] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.149670] ata3.00: ATAPI: MATSHITA DVD-RAM UJ8DB, 8.51, max UDMA/100
[    1.152322] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[    1.152325] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.152328] ata3.00: configured for UDMA/100
[    1.153600] scsi 2:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ8DB    8.51 PQ: 0 ANSI: 5
[    1.222219] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[    1.222221] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.222377] hub 1-1:1.0: USB hub found
[    1.222468] hub 1-1:1.0: 6 ports detected
[    1.248630] ata5.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    1.248633] ata5.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.248636] ata5.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.293185] ata5.00: ATA-9: ST500LM000-SSHD-8GB, LVD3, max UDMA/133
[    1.293187] ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.333771] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[    1.337337] ata5.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    1.337339] ata5.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.337342] ata5.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.381892] ata5.00: configured for UDMA/133
[    1.381960] scsi 4:0:0:0: Direct-Access     ATA      ST500LM000-SSHD- LVD3 PQ: 0 ANSI: 5
[    1.384981] sd 4:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.384984] sd 4:0:0:0: [sda] 4096-byte physical blocks
[    1.385024] sd 4:0:0:0: [sda] Write Protect is off
[    1.385027] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.385047] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.385937]  sda: sda1 sda2 sda3 sda4
[    1.386172] sd 4:0:0:0: [sda] Attached SCSI disk
[    1.387433] sr 2:0:0:0: Attached scsi generic sg0 type 5
[    1.387492] sd 4:0:0:0: Attached scsi generic sg1 type 0
[    1.389926] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.389929] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.390060] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    1.466082] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[    1.466086] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.466230] hub 2-1:1.0: USB hub found
[    1.466332] hub 2-1:1.0: 8 ports detected
[    1.621608] Refined TSC clocksource calibration: 2294.685 MHz.
[    1.621612] Switching to clocksource tsc
[    1.633609] usb 3-10: new full-speed USB device number 2 using xhci_hcd
[    1.651174] usb 3-10: New USB device found, idVendor=138a, idProduct=0011
[    1.651177] usb 3-10: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    1.651178] usb 3-10: SerialNumber: 3d7380bbd210
[    1.721694] usb 1-1.3: new full-speed USB device number 3 using ehci_hcd
[    1.769384] PM: Starting manual resume from disk
[    1.769388] PM: Hibernation image partition 8:4 present
[    1.769389] PM: Looking for hibernation image.
[    1.769541] PM: Image not found (code -22)
[    1.769543] PM: Hibernation image not present or could not be loaded.
[    1.780157] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    1.815638] usb 1-1.3: New USB device found, idVendor=0bda, idProduct=b728
[    1.815641] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.815643] usb 1-1.3: Product: Bluetooth Radio 
[    1.815645] usb 1-1.3: Manufacturer: Realtek 
[    1.815646] usb 1-1.3: SerialNumber: 00e04c000001
[    1.885605] usb 2-1.1: new low-speed USB device number 3 using ehci_hcd
[    1.981796] usb 2-1.1: New USB device found, idVendor=046d, idProduct=c06c
[    1.981800] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.981801] usb 2-1.1: Product: USB Optical Mouse
[    1.981803] usb 2-1.1: Manufacturer: Logitech
[    2.053511] usb 2-1.5: new high-speed USB device number 4 using ehci_hcd
[    2.156576] usb 2-1.5: New USB device found, idVendor=04f2, idProduct=b2fa
[    2.156579] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.156581] usb 2-1.5: Product: Integrated Camera
[    2.156582] usb 2-1.5: Manufacturer: Vimicro corp.
[    2.288625] udevd[340]: starting version 175
[    2.346548] ACPI: Requesting acpi_cpufreq
[    2.348268] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    2.349499] ACPI: Lid Switch [LID]
[    2.349551] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    2.349555] ACPI: Power Button [PWRB]
[    2.349590] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[    2.349593] ACPI: Sleep Button [SLPB]
[    2.386960] wmi: Mapper loaded
[    2.404561] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    2.453505] cfg80211: Calling CRDA to update world regulatory domain
[    2.468931] iTCO_vendor_support: vendor-support=0
[    2.469538] ACPI: resource 0000:00:1f.3 [io  0xefa0-0xefbf] conflicts with ACPI region SMBI [io 0xefa0-0xefaf]
[    2.469541] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.495828] Monitor-Mwait will be used to enter C-1 state
[    2.495835] Monitor-Mwait will be used to enter C-2 state
[    2.495840] ACPI: acpi_idle registered with cpuidle
[    2.530296] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[    2.530368] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[    2.530420] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    2.541832] Linux media interface: v0.10
[    2.560031] Bluetooth: Core ver 2.16
[    2.560046] NET: Registered protocol family 31
[    2.560047] Bluetooth: HCI device and connection manager initialized
[    2.560051] Bluetooth: HCI socket layer initialized
[    2.560052] Bluetooth: L2CAP socket layer initialized
[    2.560055] Bluetooth: SCO socket layer initialized
[    2.570304] Bluetooth: Generic Bluetooth USB driver ver 0.6
[    2.570477] usbcore: registered new interface driver btusb
[    2.633824] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    2.633978] ACPI: Power Button [PWRF]
[    2.693436] ACPI: AC Adapter [ACAD] (off-line)
[    3.261361] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400
[    3.310780] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[    3.361214] ACPI: Battery Slot [BAT1] (battery present)
[    3.372196] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input7
[    3.372414] generic-usb 0003:046D:C06C.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.1/input0
[    3.372449] usbcore: registered new interface driver usbhid
[    3.372453] usbhid: USB HID core driver
[    3.381011] Non-volatile memory driver v1.3
[    3.434866] rtl8723be 0000:04:00.0: setting latency timer to 64
[    3.434894] rtlwifi-0:rtl_pci_probe():<0-0> mem mapped space: start: 0xf0500000 len:00004000 flags:00140204, after map:0xffffc900057b0000
[    3.434913] rtlwifi-0:_rtl_pci_find_adapter():<0-0> Pci Bridge Vendor is found index: 0
[    3.434916] rtlwifi-0:_rtl_pci_find_adapter():<0-0> pcidev busnumber:devnumber:funcnumber:vendor:link_ctl 4:0:0:10ec:0
[    3.434919] rtlwifi-0:_rtl_pci_find_adapter():<0-0> pci_bridge busnumber:devnumber:funcnumber:vendor :p cie_cap:link_ctl_reg:amd 0:28:2:8086:40:43:0
[    3.442080] rtl8723be-0:rtl8723be_read_eeprom_info():<0-0> Boot from EFUSE
[    3.457570] rtl8723be: 
[    3.457572] In process "modprobe" (pid 460):MAP 
[    3.457573] 29 81 00 7C  01 08 03 00  40 00 0C 35  10 01 00 00  
[    3.457579] 2D 2C 2C 2B  2B 2B 33 33  33 32 32 E0  FF FF FF FF  
[    3.457585] FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF  
[    3.457590] FF FF FF FF  FF FF FF FF  FF FF 2C 2C  2C 2C 2C 2C  
[    3.457595] 30 30 30 2F  2F E0 FF FF  FF FF FF FF  FF FF FF FF  
[    3.457601] FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF  
[    3.457606] FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF  
[    3.457611] FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF  
[    3.457617] FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF  
[    3.457622] FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF  
[    3.457627] FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF  
[    3.457633] FF FF FF FF  FF FF FF FF  20 0F 1B 00  00 00 FF FF  
[    3.457638] FF 29 20 10  00 00 00 FF  00 FF 10 FF  FF FF FF FF  
[    3.457643] 80 56 F2 A1  B9 C3 EC 10  23 B7 AA 17  28 B7 C3 FF  
[    3.457649] 80 8D 80 08  00 00 11 3C  27 00 10 20  00 E0 4C FF  
[    3.457654] FE B7 23 00  00 0C 00 80  02 00 00 FF  1F 96 79 00  
[    3.457660] 29 81 00 7C  01 08 03 00  40 00 0C 35  10 01 00 00  
[    3.457665] 2D 2C 2C 2B  2B 2B 33 33  33 32 32 E0  FF FF FF FF  
[    3.457670] FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF  
[    3.457675] FF FF FF FF  FF FF FF FF  FF FF 2C 2C  2C 2C 2C 2C  
[    3.457681] 30 30 30 2F  2F E0 FF FF  FF FF FF FF  FF FF FF FF  
[    3.457686] FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF  
[    3.457691] FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF  
[    3.457697] FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF  
[    3.457702] FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF  
[    3.457707] FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF  
[    3.457713] FF FF FF FF  FF FF FF FF  FF FF FF FF  FF FF FF FF  
[    3.457718] FF FF FF FF  FF FF FF FF  20 0F 1B 00  00 00 FF FF  
[    3.457723] FF 29 20 10  00 00 00 FF  00 FF 10 FF  FF FF FF FF  
[    3.457729] 80 56 F2 A1  B9 C3 EC 10  23 B7 AA 17  28 B7 C3 FF  
[    3.457734] 80 8D 80 08  00 00 11 3C  27 00 10 20  00 E0 4C FF  
[    3.457739] FE B7 23 00  00 0C 00 80  02 00 00 FF  1F 96 79 00  
[    3.457745] 
[    3.457746] rtl8723be-0:_rtl8723be_read_adapter_info():<0-0> dev_addr: 80:56:f2:a1:b9:c3
[    3.457752] rtl8723be-0:_rtl8723be_hal_customized_behavior():<0-0> RT Customized ID: 0x00
[    3.461332] Linux video capture interface: v2.00
[    3.461794] snd_hda_intel 0000:00:03.0: irq 43 for MSI/MSI-X
[    3.461809] snd_hda_intel 0000:00:03.0: setting latency timer to 64
[    3.461926] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[    3.461928] thinkpad_acpi: http://ibm-acpi.sf.net/
[    3.461930] thinkpad_acpi: ThinkPad BIOS J7ET57WW (2.02 ), EC unknown
[    3.461931] thinkpad_acpi: Lenovo LENOVO, model 20278  
[    3.462198] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[    3.462591] thinkpad_acpi: radio switch found; radios are enabled
[    3.462596] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[    3.462940] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2fa)
[    3.463787] input: Integrated Camera as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input8
[    3.463828] usbcore: registered new interface driver uvcvideo
[    3.463829] USB Video Class driver (1.1.1)
[    3.478704] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[    3.480807] Registered led device: tpacpi::thinklight
[    3.480834] Registered led device: tpacpi: :p ower
[    3.480847] Registered led device: tpacpi::standby
[    3.480859] Registered led device: tpacpi::thinkvantage
[    3.481435] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[    3.481606] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[    3.484890] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input9
[    3.513163] rtl8723be 0000:04:00.0: firmware: agent loaded rtlwifi/rtl8723befw.bin into memory
[    3.513173] btcoexist-0:rtl_btc_init_hal_vars():<0-0> rtl_btc_init_hal_vars, antNum is 2
[    3.513175] btcoexist-0:rtl_btc_init_hal_vars():<0-0> rtl_btc_init_hal_vars, bt_exist is 1
[    3.513178] btcoexist-0:rtl_btc_init_hal_vars():<0-0> rtl_btc_init_hal_vars, bt_type is 8
[    3.513339] rtlwifi-0:_rtl_init_hw_ht_capab():<0-0> 1T1R
[    3.522138] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[    3.522551] rtlwifi: wireless switch is on
[    3.522603] rtl8723be 0000:04:00.0: irq 44 for MSI/MSI-X
[    3.522629] rtlwifi-0:rtl_pci_intr_mode_msi():<0-0> MSI Interrupt Mode!
[    6.486914] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x000f0000
[    7.490355] hda-intel: No response from codec, disabling MSI: last cmd=0x000f0000
[    8.493795] hda-intel: Codec #0 probe error; disabling it...
[    9.513210] hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x000f0001
[    9.517929] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[    9.517985] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[    9.565083] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[    9.568324] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[    9.570001] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[   10.002427] Adding 8893436k swap on /dev/sda4.  Priority:-1 extents:1 across:8893436k 
[   10.012952] EXT4-fs (sda2): re-mounted. Opts: (null)
[   10.123148] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[   10.146550] loop: module loaded
[   10.819615] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   10.868802] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[   11.240159] RPC: Registered named UNIX socket transport module.
[   11.240161] RPC: Registered udp transport module.
[   11.240162] RPC: Registered tcp transport module.
[   11.240164] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   11.245766] FS-Cache: Loaded
[   11.253362] FS-Cache: Netfs 'nfs' registered for caching
[   11.258391] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   11.796657] r8169 0000:05:00.0: eth0: link down
[   11.796663] r8169 0000:05:00.0: eth0: link down
[   11.797114] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   11.915047] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   11.915050] Bluetooth: BNEP filters: protocol multicast
[   11.915267] Bluetooth: RFCOMM TTY layer initialized
[   11.915270] Bluetooth: RFCOMM socket layer initialized
[   11.915271] Bluetooth: RFCOMM ver 1.11
[   11.971242] lp: driver loaded but no devices found
[   11.976044] ppdev: user-space parallel port driver
[   12.627850] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13
[   14.332181] r8169 0000:05:00.0: eth0: link up
[   14.333255] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   24.644768] eth0: no IPv6 routers present
[   43.626961] r8169 0000:05:00.0: eth0: link down
[   43.626976] r8169 0000:05:00.0: eth0: link down
[   43.628140] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   43.834852] r8169 0000:05:00.0: eth0: link down
[   43.836044] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   46.374516] r8169 0000:05:00.0: eth0: link up
[   46.375634] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   57.082692] eth0: no IPv6 routers present
[   65.048661] r8169 0000:05:00.0: eth0: link down
[  223.398769] r8169 0000:05:00.0: eth0: link down
[  223.399895] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  225.957187] r8169 0000:05:00.0: eth0: link up
[  225.958308] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  231.834052] r8169 0000:05:00.0: eth0: link down
[  231.834068] r8169 0000:05:00.0: eth0: link down
[  231.835226] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  232.645608] r8169 0000:05:00.0: eth0: link down
[  232.646774] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  235.198378] r8169 0000:05:00.0: eth0: link up
[  235.199562] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  245.817494] eth0: no IPv6 routers present
[  253.937781] r8169 0000:05:00.0: eth0: link down
[  253.937795] r8169 0000:05:00.0: eth0: link down
[  253.938991] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  254.141623] r8169 0000:05:00.0: eth0: link down
[  254.142782] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  256.666986] r8169 0000:05:00.0: eth0: link up
[  256.668100] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  266.805804] eth0: no IPv6 routers present
[ 2918.158548] thinkpad_acpi: unknown possible thermal alarm or keyboard event received
[ 2918.166910] thinkpad_acpi: temperatures (Celsius): 50 0 50 0 0 46 31 0
[ 2918.166927] thinkpad_acpi: unhandled HKEY event 0x6040
[ 2918.166932] thinkpad_acpi: please report the conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net
[ 2928.211751] thinkpad_acpi: unknown possible thermal alarm or keyboard event received
[ 2928.215592] thinkpad_acpi: temperatures (Celsius): 50 0 50 0 0 46 31 0
[ 2928.215606] thinkpad_acpi: unhandled HKEY event 0x6040
[ 2928.215611] thinkpad_acpi: please report the conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net
[ 2932.719090] thinkpad_acpi: unknown possible thermal alarm or keyboard event received
[ 2932.724425] thinkpad_acpi: temperatures (Celsius): 50 0 50 0 0 46 31 0
[ 2932.724442] thinkpad_acpi: unhandled HKEY event 0x6040
[ 2932.724448] thinkpad_acpi: please report the conditions when this event happened to ibm-acpi-devel@lists.sourceforge.net
[/INDENT]

Rafal_F: Moderator; Posty: 2350; Rejestracja: 29 sierpnia 2008, 16:45

Cytuj

Post autor: Rafal_F » 08 marca 2014, 18:35

LinXbro pisze:iwonfig wlan0 txpower auto - power 20dB

Czy po tym nadal ma problemy? dmesg wygląda OK.
Wklej ponownie wynik:

Kod: Zaznacz cały

iwconfig

ODPOWIEDZ

Posty: 13

Wróć do „Hardware”