[+] Debian Wheezy 7.2 Xfce4 - Radeon 4500 HD problem z grafik

uboot · Post autor: **uboot** » 05 grudnia 2013, 20:44

Witam
Nie daje już rady czwarty dzień i druga instlacja systemu. Czym bardziej grzebę tym gorzej wychodzi. Nie mogę uzyskać akceleracji 3D, nie wiem co jest z kartą. Proszę o pomoc

Kod: Zaznacz cały

uname -r
3.2.0-4-amd64

kartę instalowałem z https://wiki.debian.org/ATIProprietary

Kod: Zaznacz cały


# aptitude update # aptitude install linux-headers-$(uname -r|sed 's,[^-]*-[^-]*-,,') # aptitude -r -t wheezy-backports install fglrx-legacy-driver

Kod: Zaznacz cały

fglrxinfo | grep direct
X Error of failed request:  BadRequest (invalid request code or no such operation)
  Major opcode of failed request:  135 (GLX)
  Minor opcode of failed request:  19 (X_GLXQueryServerString)
  Serial number of failed request:  12
  Current serial number in output stream:  12

Kod: Zaznacz cały

lspci -k
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
    Subsystem: Hewlett-Packard Company Device 3060
00:02.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (ext gfx port 0)
    Kernel driver in use: pcieport
00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0)
    Kernel driver in use: pcieport
00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 1)
    Kernel driver in use: pcieport
00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2)
    Kernel driver in use: pcieport
00:0a.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 5)
    Kernel driver in use: pcieport
00:11.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
    Subsystem: Hewlett-Packard Company Device 3060
    Kernel driver in use: ahci
00:12.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
    Subsystem: Hewlett-Packard Company Device 3060
    Kernel driver in use: ohci_hcd
00:12.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller
    Subsystem: Hewlett-Packard Company Device 3060
    Kernel driver in use: ohci_hcd
00:12.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
    Subsystem: Hewlett-Packard Company Device 3060
    Kernel driver in use: ehci_hcd
00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
    Subsystem: Hewlett-Packard Company Device 3060
    Kernel driver in use: ohci_hcd
00:13.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller
    Subsystem: Hewlett-Packard Company Device 3060
    Kernel driver in use: ohci_hcd
00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller
    Subsystem: Hewlett-Packard Company Device 3060
    Kernel driver in use: ehci_hcd
00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 3a)
    Subsystem: Hewlett-Packard Company Device 3060
00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 IDE Controller
    Subsystem: Hewlett-Packard Company Device 3060
    Kernel driver in use: pata_atiixp
00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA)
    Subsystem: Hewlett-Packard Company Device 3060
    Kernel driver in use: snd_hda_intel
00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 LPC host controller
    Subsystem: Hewlett-Packard Company Device 3060
00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor HyperTransport Configuration (rev 40)
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Miscellaneous Control
    Kernel driver in use: k10temp
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 11h Processor Link Control
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV710 [Mobility Radeon HD 4500/5100 Series]
    Subsystem: Hewlett-Packard Company Device 3060
    Kernel driver in use: fglrx_pci
01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI RV710/730 HDMI Audio [Radeon HD 4000 series]
    Subsystem: Hewlett-Packard Company Device 3060
    Kernel driver in use: snd_hda_intel
08:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
    Subsystem: Hewlett-Packard Company U98Z062.12 802.11bgn Wireless Half-size Mini PCIe Card
    Kernel driver in use: ath9k
09:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
    Subsystem: Hewlett-Packard Company Device 3060
    Kernel driver in use: r8169

Plik /etc/X11/xorg.conf jest pusty

Proszę o poradę jak coś to jeszcze dodam jakieś wyniki.
pozdrawiam

Rafal_F · Post autor: **Rafal_F** » 05 grudnia 2013, 21:12

Plik xorg.conf jest pusty a w instrukcji w punkcie trzecim wyraźnie napisali:

https://wiki.debian.org/ATIProprietary pisze:Create an Xorg server configuration file.

I jest nawet link do tego jak to zrobić: https://wiki.debian.org/ATIProprietary#configure

Skoro instalujesz sterowniki z backportów to spróbuj zaktualizować jądro do tego z backportów

Jak nie zadziała załącz log: /var/log/Xorg.0.log.

uboot · Post autor: **uboot** » 06 grudnia 2013, 05:40

zrobiłem tak

Kod: Zaznacz cały

/etc/X11/xorg.conf.d/20-fglrx.conf 

Section "Device"         Identifier "My GPU"         Driver "fglrx" EndSection

i po wpisaniu nic się nie dzieje

Kod: Zaznacz cały

root@debian:/home/michal# fglrxinfo | grep direct
root@debian:/home/michal#

Kod: Zaznacz cały

/var/log/Xorg.0.log.

[    19.658]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[    19.658] X Protocol Version 11, Revision 0
[    19.658] Build Operating System: Linux 3.10-3-amd64 x86_64 Debian
[    19.658] Current Operating System: Linux debian 3.2.0-4-amd64 #1 SMP Debian$
[    19.658] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=U$
[    19.658] Build Date: 21 October 2013  04:49:48PM
[    19.658] xorg-server 2:1.12.4-6+deb7u1 (Moritz Muehlenhoff <jmm@debian.org>$
[    19.658] Current version of pixman: 0.26.0
[    19.658]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[    19.658] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    19.659] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec  6 05:31:17 20$
[    19.725] (==) Using config file: "/etc/X11/xorg.conf"
[    19.725] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    19.725] (==) Using system config directory "/usr/share/X11/xorg.conf.d"

może nie powinienem takich sterów instalować, co do jądra to wolał był pozostać w wersji stabilnej

Rafal_F · Post autor: **Rafal_F** » 06 grudnia 2013, 13:49

To cały plik /var/log/Xorg.0.log?

uboot · Post autor: **uboot** » 06 grudnia 2013, 18:55

przepraszam. Teraz jest cały :

Kod: Zaznacz cały

cat /var/log/Xorg.0.log
[    18.927] 
X.Org X Server 1.12.4
Release Date: 2012-08-27
[    18.927] X Protocol Version 11, Revision 0
[    18.927] Build Operating System: Linux 3.10-3-amd64 x86_64 Debian
[    18.927] Current Operating System: Linux debian 3.2.0-4-amd64 #1 SMP Debian 3.2.51-1 x86_64
[    18.927] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=000ffb68-190a-4269-b266-f9ecef852601 ro quiet
[    18.927] Build Date: 21 October 2013  04:49:48PM
[    18.927] xorg-server 2:1.12.4-6+deb7u1 (Moritz Muehlenhoff <jmm@debian.org>) 
[    18.927] Current version of pixman: 0.26.0
[    18.927]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    18.927] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    18.928] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec  6 18:49:25 2013
[    19.060] (==) Using config file: "/etc/X11/xorg.conf"
[    19.060] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    19.060] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    19.108] (==) No Layout section.  Using the first Screen section.
[    19.108] (==) No screen section available. Using defaults.
[    19.108] (**) |-->Screen "Default Screen Section" (0)
[    19.108] (**) |   |-->Monitor "<default monitor>"
[    19.108] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
[    19.108] (**) |   |-->Device "My GPU"
[    19.109] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[    19.109] (==) Automatically adding devices
[    19.109] (==) Automatically enabling devices
[    19.183] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    19.183]     Entry deleted from font path.
[    19.200] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    19.200]     Entry deleted from font path.
[    19.200] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    built-ins
[    19.200] (==) ModulePath set to "/usr/lib/xorg/modules"
[    19.200] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    19.200] (II) Loader magic: 0x7f779e331ae0
[    19.200] (II) Module ABI versions:
[    19.200]     X.Org ANSI C Emulation: 0.4
[    19.200]     X.Org Video Driver: 12.1
[    19.200]     X.Org XInput driver : 16.0
[    19.200]     X.Org Server Extension : 6.0
[    19.202] (--) PCI:*(0:1:0:0) 1002:9553:103c:3060 rev 0, Mem @ 0xc0000000/268435456, 0xd2300000/65536, I/O @ 0x00005000/256, BIOS @ 0x????????/131072
[    19.202] (II) Open ACPI successful (/var/run/acpid.socket)
[    19.202] (II) LoadModule: "extmod"
[    19.243] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    19.265] (II) Module extmod: vendor="X.Org Foundation"
[    19.265]     compiled for 1.12.4, module version = 1.0.0
[    19.265]     Module class: X.Org Server Extension
[    19.265]     ABI class: X.Org Server Extension, version 6.0
[    19.265] (II) Loading extension SELinux
[    19.265] (II) Loading extension MIT-SCREEN-SAVER
[    19.265] (II) Loading extension XFree86-VidModeExtension
[    19.265] (II) Loading extension XFree86-DGA
[    19.265] (II) Loading extension DPMS
[    19.265] (II) Loading extension XVideo
[    19.265] (II) Loading extension XVideo-MotionCompensation
[    19.265] (II) Loading extension X-Resource
[    19.265] (II) LoadModule: "dbe"
[    19.266] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    19.275] (II) Module dbe: vendor="X.Org Foundation"
[    19.275]     compiled for 1.12.4, module version = 1.0.0
[    19.275]     Module class: X.Org Server Extension
[    19.275]     ABI class: X.Org Server Extension, version 6.0
[    19.275] (II) Loading extension DOUBLE-BUFFER
[    19.275] (II) LoadModule: "glx"
[    19.275] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[    19.533] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[    19.533]     compiled for 6.9.0, module version = 1.0.0
[    19.534] (II) Loading extension GLX
[    19.534] (II) LoadModule: "record"
[    19.535] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    19.543] (II) Module record: vendor="X.Org Foundation"
[    19.543]     compiled for 1.12.4, module version = 1.13.0
[    19.543]     Module class: X.Org Server Extension
[    19.543]     ABI class: X.Org Server Extension, version 6.0
[    19.543] (II) Loading extension RECORD
[    19.543] (II) LoadModule: "dri"
[    19.544] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    19.571] (II) Module dri: vendor="X.Org Foundation"
[    19.571]     compiled for 1.12.4, module version = 1.0.0
[    19.571]     ABI class: X.Org Server Extension, version 6.0
[    19.571] (II) Loading extension XFree86-DRI
[    19.571] (II) LoadModule: "dri2"
[    19.572] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    19.573] (II) Module dri2: vendor="X.Org Foundation"
[    19.573]     compiled for 1.12.4, module version = 1.2.0
[    19.573]     ABI class: X.Org Server Extension, version 6.0
[    19.573] (II) Loading extension DRI2
[    19.573] (II) LoadModule: "fglrx"
[    19.573] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[    20.139] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[    20.140]     compiled for 1.4.99.906, module version = 8.97.2
[    20.140]     Module class: X.Org Video Driver
[    20.142] (II) Loading sub module "fglrxdrm"
[    20.142] (II) LoadModule: "fglrxdrm"
[    20.142] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    20.163] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[    20.163]     compiled for 1.4.99.906, module version = 8.97.2
[    20.164] (II) ATI Proprietary Linux Driver Version Identifier:8.97.2
[    20.164] (II) ATI Proprietary Linux Driver Release Identifier: 8.97.100.7                           
[    20.164] (II) ATI Proprietary Linux Driver Build Date: Nov 16 2012 14:45:00
[    20.164] (++) using VT number 7

[    20.167] (WW) Falling back to old probe method for fglrx
[    20.229] (II) Loading PCS database from /etc/ati/amdpcsdb
[    20.246] (--) Assigning device section with no busID to primary device
[    20.246] (--) Chipset Supported AMD Graphics Processor (0x9553) found
[    20.258] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[    20.258] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[    20.259] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:1) found
[    20.259] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[    20.259] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[    20.259] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:1) found
[    20.259] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[    20.259] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[    20.259] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found
[    20.259] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[    20.259] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[    20.259] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[    20.259] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[    20.260] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[    20.261] (II) AMD Video driver is signed
[    20.261] (II) fglrx(0): pEnt->device->identifier=0x7f779ee4a250
[    20.261] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin
[    20.262] (II) Loading sub module "vgahw"
[    20.262] (II) LoadModule: "vgahw"
[    20.262] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[    20.274] (II) Module vgahw: vendor="X.Org Foundation"
[    20.274]     compiled for 1.12.4, module version = 0.1.0
[    20.274]     ABI class: X.Org Video Driver, version 12.1
[    20.274] (II) fglrx(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[    20.274] (==) fglrx(0): Depth 24, (==) framebuffer bpp 32
[    20.274] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    20.275] (==) fglrx(0): Default visual is TrueColor
[    20.275] (==) fglrx(0): RGB weight 888
[    20.275] (II) fglrx(0): Using 8 bits per RGB 
[    20.275] (==) fglrx(0): Buffer Tiling is ON
[    20.276] (II) Loading sub module "fglrxdrm"
[    20.276] (II) LoadModule: "fglrxdrm"
[    20.276] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    20.276] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[    20.276]     compiled for 1.4.99.906, module version = 8.97.2
[    20.282] ukiDynamicMajor: found major device number 250
[    20.282] ukiDynamicMajor: found major device number 250
[    20.282] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    20.282] ukiOpenDevice: node name is /dev/ati/card0
[    20.282] ukiOpenDevice: open result is 12, (OK)
[    20.282] ukiOpenByBusid: ukiOpenMinor returns 12
[    20.282] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    20.283] (**) fglrx(0): NoAccel = NO
[    20.283] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
[    20.283] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 4500/5100 Series" (Chipset = 0x9553)
[    20.283] (--) fglrx(0): (PciSubVendor = 0x103c, PciSubDevice = 0x3060)
[    20.283] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[    20.283] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[    20.283] (--) fglrx(0): MMIO registers at 0xd2300000
[    20.283] (--) fglrx(0): I/O port at 0x00005000
[    20.283] (==) fglrx(0): ROM-BIOS at 0x000c0000
[    20.293] (II) fglrx(0): AC Adapter is used
[    20.319] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[    20.448] (II) Loading sub module "vbe"
[    20.449] (II) LoadModule: "vbe"
[    20.449] (II) Loading /usr/lib/xorg/modules/libvbe.so
[    20.464] (II) Module vbe: vendor="X.Org Foundation"
[    20.464]     compiled for 1.12.4, module version = 1.1.0
[    20.464]     ABI class: X.Org Video Driver, version 12.1
[    20.465] (II) fglrx(0): VESA BIOS detected
[    20.466] (II) fglrx(0): VESA VBE Version 3.0
[    20.466] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[    20.466] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[    20.466] (II) fglrx(0): VESA VBE OEM Software Rev: 11.22
[    20.466] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
[    20.466] (II) fglrx(0): VESA VBE OEM Product: M92
[    20.466] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[    20.514] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[    20.514] (--) fglrx(0): Video RAM: 524288 kByte, Type: DDR3
[    20.514] (II) fglrx(0): PCIE card detected
[    20.514] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[    20.514] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[    20.515] (II) fglrx(0): Using adapter: 1:0.0.
[    20.547] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
[    20.719] (II) fglrx(0): Interrupt handler installed at IRQ 47.
[    20.719] (II) fglrx(0): RandR 1.2 support is enabled!
[    20.719] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[    20.719] (==) fglrx(0): Center Mode is disabled 
[    20.719] (II) Loading sub module "fb"
[    20.719] (II) LoadModule: "fb"
[    20.719] (II) Loading /usr/lib/xorg/modules/libfb.so
[    20.733] (II) Module fb: vendor="X.Org Foundation"
[    20.733]     compiled for 1.12.4, module version = 1.0.0
[    20.733]     ABI class: X.Org ANSI C Emulation, version 0.4
[    20.733] (II) Loading sub module "ddc"
[    20.733] (II) LoadModule: "ddc"
[    20.733] (II) Module "ddc" already built-in
[    20.996] (II) fglrx(0): Finished Initialize PPLIB!
[    21.026] (II) fglrx(0): Output LVDS has no monitor section
[    21.026] (II) fglrx(0): Output DFP1 has no monitor section
[    21.026] (II) fglrx(0): Output CRT1 has no monitor section
[    21.026] (II) Loading sub module "ddc"
[    21.026] (II) LoadModule: "ddc"
[    21.026] (II) Module "ddc" already built-in
[    21.026] (II) fglrx(0): Connected Display0: LVDS
[    21.027] (II) fglrx(0): Display0 EDID data ---------------------------
[    21.027] (II) fglrx(0): Manufacturer: LGD  Model: 1c2  Serial#: 0
[    21.027] (II) fglrx(0): Year: 2008  Week: 0
[    21.027] (II) fglrx(0): EDID Version: 1.3
[    21.027] (II) fglrx(0): Digital Display Input
[    21.027] (II) fglrx(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    21.027] (II) fglrx(0): Gamma: 2.20
[    21.027] (II) fglrx(0): No DPMS capabilities specified
[    21.027] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    21.027] (II) fglrx(0): First detailed timing is preferred mode
[    21.027] (II) fglrx(0): redX: 0.608 redY: 0.338   greenX: 0.283 greenY: 0.586
[    21.027] (II) fglrx(0): blueX: 0.150 blueY: 0.103   whiteX: 0.313 whiteY: 0.329
[    21.027] (II) fglrx(0): Manufacturer's mask: 0
[    21.027] (II) fglrx(0): Supported detailed timing:
[    21.027] (II) fglrx(0): clock: 72.3 MHz   Image Size:  344 x 194 mm
[    21.027] (II) fglrx(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1526 h_border: 0
[    21.027] (II) fglrx(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 790 v_border: 0
[    21.027] (II) fglrx(0):  LG Display
[    21.027] (II) fglrx(0): Monitor name: LP156WH1-TLA3
[    21.027] (II) fglrx(0): EDID (in hex):
[    21.027] (II) fglrx(0):     00ffffffffffff0030e4c20100000000
[    21.027] (II) fglrx(0):     00120103802213780ae8959b56489626
[    21.027] (II) fglrx(0):     1a505400000001010101010101010101
[    21.027] (II) fglrx(0):     0101010101013e1c56a0500016303020
[    21.027] (II) fglrx(0):     350058c2100000190000000000000000
[    21.027] (II) fglrx(0):     00000000000000000000000000fe004c
[    21.027] (II) fglrx(0):     4720446973706c61790a2020000000fc
[    21.027] (II) fglrx(0):     004c503135365748312d544c413300de
[    21.027] (II) fglrx(0): End of Display0 EDID data --------------------
[    21.064] (II) fglrx(0): EDID for output LVDS
[    21.064] (II) fglrx(0): Manufacturer: LGD  Model: 1c2  Serial#: 0
[    21.064] (II) fglrx(0): Year: 2008  Week: 0
[    21.064] (II) fglrx(0): EDID Version: 1.3
[    21.064] (II) fglrx(0): Digital Display Input
[    21.064] (II) fglrx(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    21.065] (II) fglrx(0): Gamma: 2.20
[    21.065] (II) fglrx(0): No DPMS capabilities specified
[    21.065] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    21.065] (II) fglrx(0): First detailed timing is preferred mode
[    21.065] (II) fglrx(0): redX: 0.608 redY: 0.338   greenX: 0.283 greenY: 0.586
[    21.065] (II) fglrx(0): blueX: 0.150 blueY: 0.103   whiteX: 0.313 whiteY: 0.329
[    21.065] (II) fglrx(0): Manufacturer's mask: 0
[    21.065] (II) fglrx(0): Supported detailed timing:
[    21.065] (II) fglrx(0): clock: 72.3 MHz   Image Size:  344 x 194 mm
[    21.065] (II) fglrx(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1526 h_border: 0
[    21.065] (II) fglrx(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 790 v_border: 0
[    21.065] (II) fglrx(0):  LG Display
[    21.065] (II) fglrx(0): Monitor name: LP156WH1-TLA3
[    21.065] (II) fglrx(0): EDID (in hex):
[    21.065] (II) fglrx(0):     00ffffffffffff0030e4c20100000000
[    21.065] (II) fglrx(0):     00120103802213780ae8959b56489626
[    21.065] (II) fglrx(0):     1a505400000001010101010101010101
[    21.065] (II) fglrx(0):     0101010101013e1c56a0500016303020
[    21.065] (II) fglrx(0):     350058c2100000190000000000000000
[    21.065] (II) fglrx(0):     00000000000000000000000000fe004c
[    21.065] (II) fglrx(0):     4720446973706c61790a2020000000fc
[    21.065] (II) fglrx(0):     004c503135365748312d544c413300de
[    21.065] (II) fglrx(0): EDID vendor "LGD", prod id 450
[    21.065] (II) fglrx(0): Printing DDC gathered Modelines:
[    21.065] (II) fglrx(0): Modeline "1366x768"x0.0   72.30  1366 1414 1446 1526  768 771 776 790 -hsync -vsync (47.4 kHz eP)
[    21.065] (II) fglrx(0): Printing probed modes for output LVDS
[    21.065] (II) fglrx(0): Modeline "1366x768"x60.0   72.30  1366 1414 1446 1526  768 771 776 790 +hsync +vsync (47.4 kHz)
[    21.065] (II) fglrx(0): Modeline "1280x768"x60.0   72.30  1280 1414 1446 1526  768 771 776 790 +hsync +vsync (47.4 kHz)
[    21.065] (II) fglrx(0): Modeline "1280x720"x60.0   72.30  1280 1414 1446 1526  720 771 776 790 +hsync +vsync (47.4 kHz)
[    21.065] (II) fglrx(0): Modeline "1024x768"x60.0   72.30  1024 1414 1446 1526  768 771 776 790 +hsync +vsync (47.4 kHz)
[    21.065] (II) fglrx(0): Modeline "1024x600"x60.0   72.30  1024 1414 1446 1526  600 771 776 790 +hsync +vsync (47.4 kHz)
[    21.065] (II) fglrx(0): Modeline "800x600"x60.0   72.30  800 1414 1446 1526  600 771 776 790 +hsync +vsync (47.4 kHz)
[    21.065] (II) fglrx(0): Modeline "800x480"x60.0   72.30  800 1414 1446 1526  480 771 776 790 +hsync +vsync (47.4 kHz)
[    21.065] (II) fglrx(0): Modeline "720x480"x60.0   72.30  720 1414 1446 1526  480 771 776 790 +hsync +vsync (47.4 kHz)
[    21.065] (II) fglrx(0): Modeline "640x480"x60.0   72.30  640 1414 1446 1526  480 771 776 790 +hsync +vsync (47.4 kHz)
[    21.065] (II) fglrx(0): EDID for output DFP1
[    21.065] (II) fglrx(0): EDID for output CRT1
[    21.065] (II) fglrx(0): Output LVDS connected
[    21.065] (II) fglrx(0): Output DFP1 disconnected
[    21.065] (II) fglrx(0): Output CRT1 disconnected
[    21.065] (II) fglrx(0): Using exact sizes for initial modes
[    21.065] (II) fglrx(0): Output LVDS using initial mode 1366x768
[    21.065] (II) fglrx(0): Display dimensions: (340, 190) mm
[    21.065] (II) fglrx(0): DPI set to (102, 102)
[    21.066] (II) fglrx(0): Adapter ATI Mobility Radeon HD 4500/5100 Series has 2 configurable heads and 1 displays connected.
[    21.066] (==) fglrx(0):  PseudoColor visuals disabled
[    21.066] (II) Loading sub module "ramdac"
[    21.066] (II) LoadModule: "ramdac"
[    21.066] (II) Module "ramdac" already built-in
[    21.066] (==) fglrx(0): NoDRI = NO
[    21.066] (==) fglrx(0): Capabilities: 0x00000000
[    21.066] (==) fglrx(0): CapabilitiesEx: 0x00000000
[    21.066] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[    21.066] (==) fglrx(0): UseFastTLS=0
[    21.066] (==) fglrx(0): BlockSignalsOnLock=1
[    21.066] (--) Depth 24 pixmap format is 32 bpp
[    21.066] (II) Loading extension ATIFGLRXDRI
[    21.066] (II) fglrx(0): doing swlDriScreenInit
[    21.066] (II) fglrx(0): swlDriScreenInit for fglrx driver
[    21.066] ukiDynamicMajor: found major device number 250
[    21.066] ukiDynamicMajor: found major device number 250
[    21.067] ukiDynamicMajor: found major device number 250
[    21.067] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    21.067] ukiOpenDevice: node name is /dev/ati/card0
[    21.067] ukiOpenDevice: open result is 13, (OK)
[    21.067] ukiOpenByBusid: ukiOpenMinor returns 13
[    21.067] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    21.067] (II) fglrx(0): [uki] DRM interface version 1.0
[    21.067] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[    21.067] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[    21.067] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f7798874000
[    21.067] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[    21.067] (II) fglrx(0): [uki] added 1 reserved context for kernel
[    21.067] (II) fglrx(0): swlDriScreenInit done
[    21.067] (II) fglrx(0): Kernel Module Version Information:
[    21.067] (II) fglrx(0):     Name: fglrx
[    21.067] (II) fglrx(0):     Version: 8.97.2
[    21.067] (II) fglrx(0):     Date: Nov 16 2012
[    21.067] (II) fglrx(0):     Desc: ATI FireGL DRM kernel module
[    21.067] (II) fglrx(0): Kernel Module version matches driver.
[    21.067] (II) fglrx(0): Kernel Module Build Time Information:
[    21.067] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        3.2.0-4-amd64
[    21.067] (II) fglrx(0):     Build-Kernel MODVERSIONS:        no
[    21.067] (II) fglrx(0):     Build-Kernel __SMP__:            no
[    21.067] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
[    21.067] (II) fglrx(0): [uki] register handle = 0x00004000
[    21.108] (II) fglrx(0): DRI initialization successfull
[    21.134] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01004000
[    21.139] (==) fglrx(0): Backing store disabled
[    21.139] (II) Loading extension FGLRXEXTENSION
[    21.139] (==) fglrx(0): DPMS enabled
[    21.140] (II) fglrx(0): Initialized in-driver Xinerama extension
[    21.140] (**) fglrx(0): Textured Video is enabled.
[    21.141] (II) LoadModule: "glesx"
[    21.141] (II) Loading /usr/lib/xorg/modules/glesx.so
[    21.292] (II) Module glesx: vendor="X.Org Foundation"
[    21.292]     compiled for 1.4.99.906, module version = 1.0.0
[    21.292] (II) Loading extension GLESX
[    21.292] (II) fglrx(0): GLESX enableFlags = 528
[    21.304] (II) fglrx(0): GLESX is enabled
[    21.305] (II) LoadModule: "amdxmm"
[    21.305] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[    21.396] (II) Module amdxmm: vendor="X.Org Foundation"
[    21.397]     compiled for 1.4.99.906, module version = 2.0.0
[    21.397] (II) Loading extension AMDXVOPL
[    21.397] (II) Loading extension AMDXVBA
[    21.408] (II) fglrx(0): UVD feature is enabled(II) fglrx(0): 
[    21.411] (II) fglrx(0): Enable composite support successfully
[    21.411] (II) fglrx(0): X context handle = 0x1
[    21.411] (II) fglrx(0): [DRI] installation complete
[    21.412] (==) fglrx(0): Silken mouse enabled
[    21.412] (==) fglrx(0): Using HW cursor of display infrastructure!
[    21.413] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[    21.413] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[    21.413] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[    22.466] (--) RandR disabled
[    22.466] (II) Initializing built-in extension Generic Event Extension
[    22.466] (II) Initializing built-in extension SHAPE
[    22.466] (II) Initializing built-in extension MIT-SHM
[    22.466] (II) Initializing built-in extension XInputExtension
[    22.466] (II) Initializing built-in extension XTEST
[    22.466] (II) Initializing built-in extension BIG-REQUESTS
[    22.466] (II) Initializing built-in extension SYNC
[    22.466] (II) Initializing built-in extension XKEYBOARD
[    22.466] (II) Initializing built-in extension XC-MISC
[    22.466] (II) Initializing built-in extension SECURITY
[    22.466] (II) Initializing built-in extension XINERAMA
[    22.466] (II) Initializing built-in extension XFIXES
[    22.466] (II) Initializing built-in extension RENDER
[    22.466] (II) Initializing built-in extension RANDR
[    22.466] (II) Initializing built-in extension COMPOSITE
[    22.466] (II) Initializing built-in extension DAMAGE
[    22.466] (II) SELinux: Disabled on system
[    22.470] ukiDynamicMajor: found major device number 250
[    22.470] ukiDynamicMajor: found major device number 250
[    22.470] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    22.470] ukiOpenDevice: node name is /dev/ati/card0
[    22.470] ukiOpenDevice: open result is 14, (OK)
[    22.470] ukiOpenByBusid: ukiOpenMinor returns 14
[    22.470] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    23.844] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[    24.160] (II) fglrx(0): Enable the clock gating!
[    24.160] (II) fglrx(0): Setting screen physical size to 361 x 203
[    24.798] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    24.799] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    24.799] (II) LoadModule: "evdev"
[    24.799] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    24.809] (II) Module evdev: vendor="X.Org Foundation"
[    24.809]     compiled for 1.12.1, module version = 2.7.0
[    24.809]     Module class: X.Org XInput Driver
[    24.809]     ABI class: X.Org XInput driver, version 16.0
[    24.809] (II) Using input driver 'evdev' for 'Power Button'
[    24.809] (**) Power Button: always reports core events
[    24.809] (**) evdev: Power Button: Device: "/dev/input/event4"
[    24.809] (--) evdev: Power Button: Vendor 0 Product 0x1
[    24.809] (--) evdev: Power Button: Found keys
[    24.809] (II) evdev: Power Button: Configuring as keyboard
[    24.809] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[    24.809] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    24.809] (**) Option "xkb_rules" "evdev"
[    24.809] (**) Option "xkb_model" "pc105"
[    24.809] (**) Option "xkb_layout" "pl"
[    24.866] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    24.866] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    24.866] (II) Using input driver 'evdev' for 'Video Bus'
[    24.866] (**) Video Bus: always reports core events
[    24.866] (**) evdev: Video Bus: Device: "/dev/input/event5"
[    24.866] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    24.866] (--) evdev: Video Bus: Found keys
[    24.866] (II) evdev: Video Bus: Configuring as keyboard
[    24.866] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:06/LNXVIDEO:01/input/input5/event5"
[    24.866] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    24.866] (**) Option "xkb_rules" "evdev"
[    24.866] (**) Option "xkb_model" "pc105"
[    24.866] (**) Option "xkb_layout" "pl"
[    24.867] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    24.867] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    24.867] (II) Using input driver 'evdev' for 'Power Button'
[    24.867] (**) Power Button: always reports core events
[    24.867] (**) evdev: Power Button: Device: "/dev/input/event1"
[    24.867] (--) evdev: Power Button: Vendor 0 Product 0x1
[    24.867] (--) evdev: Power Button: Found keys
[    24.867] (II) evdev: Power Button: Configuring as keyboard
[    24.867] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[    24.867] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    24.867] (**) Option "xkb_rules" "evdev"
[    24.867] (**) Option "xkb_model" "pc105"
[    24.867] (**) Option "xkb_layout" "pl"
[    24.868] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[    24.868] (II) No input driver specified, ignoring this device.
[    24.868] (II) This device may have been added with another device file.
[    24.869] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    24.869] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    24.869] (II) Using input driver 'evdev' for 'Sleep Button'
[    24.869] (**) Sleep Button: always reports core events
[    24.869] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[    24.869] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    24.869] (--) evdev: Sleep Button: Found keys
[    24.869] (II) evdev: Sleep Button: Configuring as keyboard
[    24.869] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[    24.869] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    24.869] (**) Option "xkb_rules" "evdev"
[    24.869] (**) Option "xkb_model" "pc105"
[    24.869] (**) Option "xkb_layout" "pl"
[    24.870] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event15)
[    24.870] (II) No input driver specified, ignoring this device.
[    24.870] (II) This device may have been added with another device file.
[    24.870] (II) config/udev: Adding input device HP Webcam (/dev/input/event8)
[    24.870] (**) HP Webcam: Applying InputClass "evdev keyboard catchall"
[    24.870] (II) Using input driver 'evdev' for 'HP Webcam'
[    24.870] (**) HP Webcam: always reports core events
[    24.870] (**) evdev: HP Webcam: Device: "/dev/input/event8"
[    24.870] (--) evdev: HP Webcam: Vendor 0x64e Product 0xc107
[    24.870] (--) evdev: HP Webcam: Found keys
[    24.870] (II) evdev: HP Webcam: Configuring as keyboard
[    24.870] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input8/event8"
[    24.870] (II) XINPUT: Adding extended input device "HP Webcam" (type: KEYBOARD, id 10)
[    24.870] (**) Option "xkb_rules" "evdev"
[    24.870] (**) Option "xkb_model" "pc105"
[    24.871] (**) Option "xkb_layout" "pl"
[    24.871] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event12)
[    24.871] (II) No input driver specified, ignoring this device.
[    24.871] (II) This device may have been added with another device file.
[    24.872] (II) config/udev: Adding input device HDA ATI SB Mic (/dev/input/event13)
[    24.872] (II) No input driver specified, ignoring this device.
[    24.872] (II) This device may have been added with another device file.
[    24.872] (II) config/udev: Adding input device HDA ATI SB Line-out (/dev/input/event14)
[    24.872] (II) No input driver specified, ignoring this device.
[    24.872] (II) This device may have been added with another device file.
[    24.873] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    24.873] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    24.873] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    24.873] (**) AT Translated Set 2 keyboard: always reports core events
[    24.873] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    24.873] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    24.873] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    24.873] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    24.873] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    24.873] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[    24.873] (**) Option "xkb_rules" "evdev"
[    24.873] (**) Option "xkb_model" "pc105"
[    24.873] (**) Option "xkb_layout" "pl"
[    24.874] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event16)
[    24.874] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    24.874] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    24.874] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    24.874] (II) LoadModule: "synaptics"
[    24.874] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    24.887] (II) Module synaptics: vendor="X.Org Foundation"
[    24.887]     compiled for 1.12.4, module version = 1.6.2
[    24.888]     Module class: X.Org XInput Driver
[    24.888]     ABI class: X.Org XInput driver, version 16.0
[    24.888] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    24.888] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    24.888] (**) Option "Device" "/dev/input/event16"
[    24.928] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[    24.928] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[    24.928] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    24.928] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    24.928] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right
[    24.928] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    24.928] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    24.928] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    24.936] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input16/event16"
[    24.936] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[    24.936] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    24.936] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    24.936] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
[    24.937] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    24.937] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    24.937] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    24.937] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    24.937] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    24.938] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[    24.938] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    24.939] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event10)
[    24.939] (II) No input driver specified, ignoring this device.
[    24.939] (II) This device may have been added with another device file.
[    24.939] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[    24.940] (II) No input driver specified, ignoring this device.
[    24.940] (II) This device may have been added with another device file.
[    24.940] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    24.940] (II) No input driver specified, ignoring this device.
[    24.940] (II) This device may have been added with another device file.
[    24.942] (II) config/udev: Adding input device MCE IR Keyboard/Mouse (ene_ir) (/dev/input/event11)
[    24.942] (**) MCE IR Keyboard/Mouse (ene_ir): Applying InputClass "evdev pointer catchall"
[    24.942] (**) MCE IR Keyboard/Mouse (ene_ir): Applying InputClass "evdev keyboard catchall"
[    24.942] (II) Using input driver 'evdev' for 'MCE IR Keyboard/Mouse (ene_ir)'
[    24.942] (**) MCE IR Keyboard/Mouse (ene_ir): always reports core events
[    24.942] (**) evdev: MCE IR Keyboard/Mouse (ene_ir): Device: "/dev/input/event11"
[    24.942] (--) evdev: MCE IR Keyboard/Mouse (ene_ir): Vendor 0 Product 0
[    24.942] (--) evdev: MCE IR Keyboard/Mouse (ene_ir): Found 3 mouse buttons
[    24.942] (--) evdev: MCE IR Keyboard/Mouse (ene_ir): Found relative axes
[    24.942] (--) evdev: MCE IR Keyboard/Mouse (ene_ir): Found x and y relative axes
[    24.942] (--) evdev: MCE IR Keyboard/Mouse (ene_ir): Found keys
[    24.942] (II) evdev: MCE IR Keyboard/Mouse (ene_ir): Configuring as mouse
[    24.942] (II) evdev: MCE IR Keyboard/Mouse (ene_ir): Configuring as keyboard
[    24.942] (**) evdev: MCE IR Keyboard/Mouse (ene_ir): YAxisMapping: buttons 4 and 5
[    24.942] (**) evdev: MCE IR Keyboard/Mouse (ene_ir): EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    24.942] (**) Option "config_info" "udev:/sys/devices/virtual/input/input11/event11"
[    24.942] (II) XINPUT: Adding extended input device "MCE IR Keyboard/Mouse (ene_ir)" (type: KEYBOARD, id 13)
[    24.942] (**) Option "xkb_rules" "evdev"
[    24.942] (**) Option "xkb_model" "pc105"
[    24.942] (**) Option "xkb_layout" "pl"
[    24.943] (II) evdev: MCE IR Keyboard/Mouse (ene_ir): initialized for relative axes.
[    24.944] (**) MCE IR Keyboard/Mouse (ene_ir): (accel) keeping acceleration scheme 1
[    24.944] (**) MCE IR Keyboard/Mouse (ene_ir): (accel) acceleration profile 0
[    24.944] (**) MCE IR Keyboard/Mouse (ene_ir): (accel) acceleration factor: 2.000
[    24.944] (**) MCE IR Keyboard/Mouse (ene_ir): (accel) acceleration threshold: 4
[    24.945] (II) config/udev: Adding input device MCE IR Keyboard/Mouse (ene_ir) (/dev/input/mouse0)
[    24.945] (II) No input driver specified, ignoring this device.
[    24.945] (II) This device may have been added with another device file.
[    24.946] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event9)
[    24.946] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    24.946] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[    24.946] (**) HP WMI hotkeys: always reports core events
[    24.946] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event9"
[    24.946] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[    24.946] (--) evdev: HP WMI hotkeys: Found keys
[    24.946] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[    24.946] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event9"
[    24.946] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 14)
[    24.946] (**) Option "xkb_rules" "evdev"
[    24.946] (**) Option "xkb_model" "pc105"
[    24.946] (**) Option "xkb_layout" "pl"
[    24.948] (II) config/udev: Adding input device ENE eHome Infrared Remote Receiver (/dev/input/event7)
[    24.948] (**) ENE eHome Infrared Remote Receiver: Applying InputClass "evdev keyboard catchall"
[    24.948] (II) Using input driver 'evdev' for 'ENE eHome Infrared Remote Receiver'
[    24.948] (**) ENE eHome Infrared Remote Receiver: always reports core events
[    24.948] (**) evdev: ENE eHome Infrared Remote Receiver: Device: "/dev/input/event7"
[    24.948] (--) evdev: ENE eHome Infrared Remote Receiver: Vendor 0 Product 0
[    24.948] (--) evdev: ENE eHome Infrared Remote Receiver: Found keys
[    24.948] (II) evdev: ENE eHome Infrared Remote Receiver: Configuring as keyboard
[    24.948] (**) Option "config_info" "udev:/sys/devices/virtual/rc/rc0/input7/event7"
[    24.948] (II) XINPUT: Adding extended input device "ENE eHome Infrared Remote Receiver" (type: KEYBOARD, id 15)
[    24.949] (**) Option "xkb_rules" "evdev"
[    24.949] (**) Option "xkb_model" "pc105"
[    24.949] (**) Option "xkb_layout" "pl"
[    25.434] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[    50.031] (II) fglrx(0): AC Offline
[    50.788] (II) fglrx(0): EDID vendor "LGD", prod id 450
[    50.788] (II) fglrx(0): Printing DDC gathered Modelines:
[    50.788] (II) fglrx(0): Modeline "1366x768"x0.0   72.30  1366 1414 1446 1526  768 771 776 790 -hsync -vsync (47.4 kHz eP)
[    50.805] (II) fglrx(0): EDID vendor "LGD", prod id 450
[    50.805] (II) fglrx(0): Printing DDC gathered Modelines:
[    50.805] (II) fglrx(0): Modeline "1366x768"x0.0   72.30  1366 1414 1446 1526  768 771 776 790 -hsync -vsync (47.4 kHz eP)
[    52.871] (II) fglrx(0): EDID vendor "LGD", prod id 450
[    52.871] (II) fglrx(0): Printing DDC gathered Modelines:
[    52.871] (II) fglrx(0): Modeline "1366x768"x0.0   72.30  1366 1414 1446 1526  768 771 776 790 -hsync -vsync (47.4 kHz eP)

Rafal_F · Post autor: **Rafal_F** » 06 grudnia 2013, 20:09

Wygląda na to, że akceleracja działa:

Kod: Zaznacz cały

[    21.411] (II) fglrx(0): [DRI] installation complete

Może wywal ten xorg który utworzyłeś i spróbuj tak (jako root):

Kod: Zaznacz cały

aticonfig --initial

uboot · Post autor: **uboot** » 06 grudnia 2013, 20:21

zrobiłem tak:

Kod: Zaznacz cały

rm /etc/X11/xorg.conf.d/20-fglrx.conf

Kod: Zaznacz cały

# aticonfig --initial
Uninitialised file found, configuring.
Using /etc/X11/xorg.conf
Saving back-up to /etc/X11/xorg.conf.original-0

Kod: Zaznacz cały

fglrxinfo | grep direct
michal@debian:~$

a w tym moim pliku

Kod: Zaznacz cały


/var/log/Xorg.0.log

to nie ma za dużo błędów ?

Rafal_F · Post autor: **Rafal_F** » 06 grudnia 2013, 21:12

To są ostrzeżenia, a nie błędy. Z loga wynika, że nie są one krytyczne.

Teraz dostarcz:

jeszcze raz log /var/log/Xorg.0.log
nowy xorg.conf
wyniki polecenia:
Kod: Zaznacz cały
```
dmesg
```
wyniki samego:
Kod: Zaznacz cały
```
fglrxinfo
```
bez greep.

uboot · Post autor: **uboot** » 06 grudnia 2013, 22:09

ok:

Kod: Zaznacz cały


 cat /var/log/Xorg.0.log
[    20.647] 
X.Org X Server 1.12.4
Release Date: 2012-08-27
[    20.647] X Protocol Version 11, Revision 0
[    20.647] Build Operating System: Linux 3.10-3-amd64 x86_64 Debian
[    20.647] Current Operating System: Linux debian 3.2.0-4-amd64 #1 SMP Debian 3.2.51-1 x86_64
[    20.647] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=000ffb68-190a-4269-b266-f9ecef852601 ro quiet
[    20.647] Build Date: 21 October 2013  04:49:48PM
[    20.647] xorg-server 2:1.12.4-6+deb7u1 (Moritz Muehlenhoff <jmm@debian.org>) 
[    20.647] Current version of pixman: 0.26.0
[    20.647]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    20.647] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    20.647] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec  6 20:42:38 2013
[    20.735] (==) Using config file: "/etc/X11/xorg.conf"
[    20.735] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    20.805] (==) ServerLayout "aticonfig Layout"
[    20.806] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[    20.806] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[    20.806] (**) |   |-->Device "aticonfig-Device[0]-0"
[    20.806] (==) Automatically adding devices
[    20.806] (==) Automatically enabling devices
[    20.947] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    20.947]     Entry deleted from font path.
[    20.962] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[    20.962]     Entry deleted from font path.
[    20.962] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    built-ins
[    20.962] (==) ModulePath set to "/usr/lib/xorg/modules"
[    20.962] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    20.962] (II) Loader magic: 0x7fccadc86ae0
[    20.962] (II) Module ABI versions:
[    20.962]     X.Org ANSI C Emulation: 0.4
[    20.962]     X.Org Video Driver: 12.1
[    20.962]     X.Org XInput driver : 16.0
[    20.962]     X.Org Server Extension : 6.0
[    20.964] (--) PCI:*(0:1:0:0) 1002:9553:103c:3060 rev 0, Mem @ 0xc0000000/268435456, 0xd2300000/65536, I/O @ 0x00005000/256, BIOS @ 0x????????/131072
[    20.964] (II) Open ACPI successful (/var/run/acpid.socket)
[    20.964] (II) "extmod" will be loaded by default.
[    20.964] (II) "dbe" will be loaded by default.
[    20.964] (II) "glx" will be loaded by default.
[    20.964] (II) "record" will be loaded by default.
[    20.964] (II) "dri" will be loaded by default.
[    20.964] (II) "dri2" will be loaded by default.
[    20.964] (II) LoadModule: "extmod"
[    20.994] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    21.018] (II) Module extmod: vendor="X.Org Foundation"
[    21.018]     compiled for 1.12.4, module version = 1.0.0
[    21.018]     Module class: X.Org Server Extension
[    21.018]     ABI class: X.Org Server Extension, version 6.0
[    21.018] (II) Loading extension SELinux
[    21.018] (II) Loading extension MIT-SCREEN-SAVER
[    21.018] (II) Loading extension XFree86-VidModeExtension
[    21.018] (II) Loading extension XFree86-DGA
[    21.018] (II) Loading extension DPMS
[    21.018] (II) Loading extension XVideo
[    21.018] (II) Loading extension XVideo-MotionCompensation
[    21.018] (II) Loading extension X-Resource
[    21.018] (II) LoadModule: "dbe"
[    21.019] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    21.028] (II) Module dbe: vendor="X.Org Foundation"
[    21.028]     compiled for 1.12.4, module version = 1.0.0
[    21.028]     Module class: X.Org Server Extension
[    21.028]     ABI class: X.Org Server Extension, version 6.0
[    21.028] (II) Loading extension DOUBLE-BUFFER
[    21.028] (II) LoadModule: "glx"
[    21.028] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[    21.054] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[    21.054]     compiled for 6.9.0, module version = 1.0.0
[    21.054] (II) Loading extension GLX
[    21.054] (II) LoadModule: "record"
[    21.055] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    21.056] (II) Module record: vendor="X.Org Foundation"
[    21.056]     compiled for 1.12.4, module version = 1.13.0
[    21.057]     Module class: X.Org Server Extension
[    21.057]     ABI class: X.Org Server Extension, version 6.0
[    21.057] (II) Loading extension RECORD
[    21.057] (II) LoadModule: "dri"
[    21.057] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    21.080] (II) Module dri: vendor="X.Org Foundation"
[    21.080]     compiled for 1.12.4, module version = 1.0.0
[    21.080]     ABI class: X.Org Server Extension, version 6.0
[    21.080] (II) Loading extension XFree86-DRI
[    21.080] (II) LoadModule: "dri2"
[    21.081] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    21.082] (II) Module dri2: vendor="X.Org Foundation"
[    21.082]     compiled for 1.12.4, module version = 1.2.0
[    21.082]     ABI class: X.Org Server Extension, version 6.0
[    21.082] (II) Loading extension DRI2
[    21.082] (II) LoadModule: "fglrx"
[    21.082] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[    21.404] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[    21.404]     compiled for 1.4.99.906, module version = 8.97.2
[    21.404]     Module class: X.Org Video Driver
[    21.406] (II) Loading sub module "fglrxdrm"
[    21.406] (II) LoadModule: "fglrxdrm"
[    21.406] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    21.439] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[    21.439]     compiled for 1.4.99.906, module version = 8.97.2
[    21.439] (II) ATI Proprietary Linux Driver Version Identifier:8.97.2
[    21.439] (II) ATI Proprietary Linux Driver Release Identifier: 8.97.100.7                           
[    21.439] (II) ATI Proprietary Linux Driver Build Date: Nov 16 2012 14:45:00
[    21.439] (++) using VT number 7

[    21.443] (WW) Falling back to old probe method for fglrx
[    21.505] (II) Loading PCS database from /etc/ati/amdpcsdb
[    21.522] (--) Chipset Supported AMD Graphics Processor (0x9553) found
[    21.523] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
[    21.523] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
[    21.523] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:1) found
[    21.523] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
[    21.523] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
[    21.523] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:1) found
[    21.523] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
[    21.523] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
[    21.523] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found
[    21.523] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
[    21.523] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
[    21.523] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
[    21.523] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[    21.525] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[    21.525] (II) AMD Video driver is signed
[    21.526] (II) fglrx(0): pEnt->device->identifier=0x7fccaf384c20
[    21.526] (II) fglrx(0): === [xdl_xs112_atiddxPreInit] === begin
[    21.526] (II) Loading sub module "vgahw"
[    21.526] (II) LoadModule: "vgahw"
[    21.527] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[    21.538] (II) Module vgahw: vendor="X.Org Foundation"
[    21.539]     compiled for 1.12.4, module version = 0.1.0
[    21.539]     ABI class: X.Org Video Driver, version 12.1
[    21.539] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[    21.539] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    21.539] (==) fglrx(0): Default visual is TrueColor
[    21.539] (**) fglrx(0): Option "DPMS" "true"
[    21.539] (==) fglrx(0): RGB weight 888
[    21.539] (II) fglrx(0): Using 8 bits per RGB 
[    21.539] (==) fglrx(0): Buffer Tiling is ON
[    21.541] (II) Loading sub module "fglrxdrm"
[    21.541] (II) LoadModule: "fglrxdrm"
[    21.541] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    21.541] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[    21.541]     compiled for 1.4.99.906, module version = 8.97.2
[    21.546] ukiDynamicMajor: found major device number 252
[    21.546] ukiDynamicMajor: found major device number 252
[    21.547] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    21.547] ukiOpenDevice: node name is /dev/ati/card0
[    21.547] ukiOpenDevice: open result is 12, (OK)
[    21.547] ukiOpenByBusid: ukiOpenMinor returns 12
[    21.547] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    21.547] (**) fglrx(0): NoAccel = NO
[    21.547] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
[    21.547] (--) fglrx(0): Chipset: "ATI Mobility Radeon HD 4500/5100 Series" (Chipset = 0x9553)
[    21.547] (--) fglrx(0): (PciSubVendor = 0x103c, PciSubDevice = 0x3060)
[    21.547] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[    21.547] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[    21.547] (--) fglrx(0): MMIO registers at 0xd2300000
[    21.548] (--) fglrx(0): I/O port at 0x00005000
[    21.548] (==) fglrx(0): ROM-BIOS at 0x000c0000
[    21.557] (II) fglrx(0): AC Adapter is used
[    21.584] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[    21.778] (II) Loading sub module "vbe"
[    21.778] (II) LoadModule: "vbe"
[    21.778] (II) Loading /usr/lib/xorg/modules/libvbe.so
[    21.795] (II) Module vbe: vendor="X.Org Foundation"
[    21.795]     compiled for 1.12.4, module version = 1.1.0
[    21.795]     ABI class: X.Org Video Driver, version 12.1
[    21.796] (II) fglrx(0): VESA BIOS detected
[    21.796] (II) fglrx(0): VESA VBE Version 3.0
[    21.796] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[    21.796] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[    21.796] (II) fglrx(0): VESA VBE OEM Software Rev: 11.22
[    21.796] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
[    21.796] (II) fglrx(0): VESA VBE OEM Product: M92
[    21.796] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[    21.831] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[    21.831] (--) fglrx(0): Video RAM: 524288 kByte, Type: DDR3
[    21.831] (II) fglrx(0): PCIE card detected
[    21.831] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[    21.831] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[    21.833] (II) fglrx(0): Using adapter: 1:0.0.
[    21.864] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
[    21.913] (II) fglrx(0): Interrupt handler installed at IRQ 47.
[    21.913] (II) fglrx(0): RandR 1.2 support is enabled!
[    21.913] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[    21.913] (==) fglrx(0): Center Mode is disabled 
[    21.913] (II) Loading sub module "fb"
[    21.913] (II) LoadModule: "fb"
[    21.913] (II) Loading /usr/lib/xorg/modules/libfb.so
[    21.931] (II) Module fb: vendor="X.Org Foundation"
[    21.931]     compiled for 1.12.4, module version = 1.0.0
[    21.931]     ABI class: X.Org ANSI C Emulation, version 0.4
[    21.931] (II) Loading sub module "ddc"
[    21.931] (II) LoadModule: "ddc"
[    21.931] (II) Module "ddc" already built-in
[    22.180] (II) fglrx(0): Finished Initialize PPLIB!
[    22.198] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[    22.198] (II) fglrx(0): Output DFP1 has no monitor section
[    22.198] (II) fglrx(0): Output CRT1 has no monitor section
[    22.198] (II) Loading sub module "ddc"
[    22.198] (II) LoadModule: "ddc"
[    22.198] (II) Module "ddc" already built-in
[    22.198] (II) fglrx(0): Connected Display0: LVDS
[    22.198] (II) fglrx(0): Display0 EDID data ---------------------------
[    22.198] (II) fglrx(0): Manufacturer: LGD  Model: 1c2  Serial#: 0
[    22.198] (II) fglrx(0): Year: 2008  Week: 0
[    22.198] (II) fglrx(0): EDID Version: 1.3
[    22.198] (II) fglrx(0): Digital Display Input
[    22.198] (II) fglrx(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    22.198] (II) fglrx(0): Gamma: 2.20
[    22.198] (II) fglrx(0): No DPMS capabilities specified
[    22.198] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    22.198] (II) fglrx(0): First detailed timing is preferred mode
[    22.199] (II) fglrx(0): redX: 0.608 redY: 0.338   greenX: 0.283 greenY: 0.586
[    22.199] (II) fglrx(0): blueX: 0.150 blueY: 0.103   whiteX: 0.313 whiteY: 0.329
[    22.199] (II) fglrx(0): Manufacturer's mask: 0
[    22.199] (II) fglrx(0): Supported detailed timing:
[    22.199] (II) fglrx(0): clock: 72.3 MHz   Image Size:  344 x 194 mm
[    22.199] (II) fglrx(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1526 h_border: 0
[    22.199] (II) fglrx(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 790 v_border: 0
[    22.199] (II) fglrx(0):  LG Display
[    22.199] (II) fglrx(0): Monitor name: LP156WH1-TLA3
[    22.199] (II) fglrx(0): EDID (in hex):
[    22.199] (II) fglrx(0):     00ffffffffffff0030e4c20100000000
[    22.199] (II) fglrx(0):     00120103802213780ae8959b56489626
[    22.199] (II) fglrx(0):     1a505400000001010101010101010101
[    22.199] (II) fglrx(0):     0101010101013e1c56a0500016303020
[    22.199] (II) fglrx(0):     350058c2100000190000000000000000
[    22.199] (II) fglrx(0):     00000000000000000000000000fe004c
[    22.199] (II) fglrx(0):     4720446973706c61790a2020000000fc
[    22.199] (II) fglrx(0):     004c503135365748312d544c413300de
[    22.199] (II) fglrx(0): End of Display0 EDID data --------------------
[    22.234] (II) fglrx(0): EDID for output LVDS
[    22.234] (II) fglrx(0): Manufacturer: LGD  Model: 1c2  Serial#: 0
[    22.234] (II) fglrx(0): Year: 2008  Week: 0
[    22.234] (II) fglrx(0): EDID Version: 1.3
[    22.234] (II) fglrx(0): Digital Display Input
[    22.234] (II) fglrx(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    22.234] (II) fglrx(0): Gamma: 2.20
[    22.234] (II) fglrx(0): No DPMS capabilities specified
[    22.234] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    22.234] (II) fglrx(0): First detailed timing is preferred mode
[    22.234] (II) fglrx(0): redX: 0.608 redY: 0.338   greenX: 0.283 greenY: 0.586
[    22.234] (II) fglrx(0): blueX: 0.150 blueY: 0.103   whiteX: 0.313 whiteY: 0.329
[    22.234] (II) fglrx(0): Manufacturer's mask: 0
[    22.234] (II) fglrx(0): Supported detailed timing:
[    22.234] (II) fglrx(0): clock: 72.3 MHz   Image Size:  344 x 194 mm
[    22.234] (II) fglrx(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1526 h_border: 0
[    22.234] (II) fglrx(0): v_active: 768  v_sync: 771  v_sync_end 776 v_blanking: 790 v_border: 0
[    22.234] (II) fglrx(0):  LG Display
[    22.234] (II) fglrx(0): Monitor name: LP156WH1-TLA3
[    22.234] (II) fglrx(0): EDID (in hex):
[    22.234] (II) fglrx(0):     00ffffffffffff0030e4c20100000000
[    22.234] (II) fglrx(0):     00120103802213780ae8959b56489626
[    22.234] (II) fglrx(0):     1a505400000001010101010101010101
[    22.234] (II) fglrx(0):     0101010101013e1c56a0500016303020
[    22.234] (II) fglrx(0):     350058c2100000190000000000000000
[    22.234] (II) fglrx(0):     00000000000000000000000000fe004c
[    22.234] (II) fglrx(0):     4720446973706c61790a2020000000fc
[    22.234] (II) fglrx(0):     004c503135365748312d544c413300de
[    22.234] (II) fglrx(0): EDID vendor "LGD", prod id 450
[    22.234] (II) fglrx(0): Printing DDC gathered Modelines:
[    22.234] (II) fglrx(0): Modeline "1366x768"x0.0   72.30  1366 1414 1446 1526  768 771 776 790 -hsync -vsync (47.4 kHz eP)
[    22.234] (II) fglrx(0): Printing probed modes for output LVDS
[    22.234] (II) fglrx(0): Modeline "1366x768"x60.0   72.30  1366 1414 1446 1526  768 771 776 790 +hsync +vsync (47.4 kHz)
[    22.234] (II) fglrx(0): Modeline "1280x768"x60.0   72.30  1280 1414 1446 1526  768 771 776 790 +hsync +vsync (47.4 kHz)
[    22.234] (II) fglrx(0): Modeline "1280x720"x60.0   72.30  1280 1414 1446 1526  720 771 776 790 +hsync +vsync (47.4 kHz)
[    22.234] (II) fglrx(0): Modeline "1024x768"x60.0   72.30  1024 1414 1446 1526  768 771 776 790 +hsync +vsync (47.4 kHz)
[    22.234] (II) fglrx(0): Modeline "1024x600"x60.0   72.30  1024 1414 1446 1526  600 771 776 790 +hsync +vsync (47.4 kHz)
[    22.234] (II) fglrx(0): Modeline "800x600"x60.0   72.30  800 1414 1446 1526  600 771 776 790 +hsync +vsync (47.4 kHz)
[    22.234] (II) fglrx(0): Modeline "800x480"x60.0   72.30  800 1414 1446 1526  480 771 776 790 +hsync +vsync (47.4 kHz)
[    22.234] (II) fglrx(0): Modeline "720x480"x60.0   72.30  720 1414 1446 1526  480 771 776 790 +hsync +vsync (47.4 kHz)
[    22.234] (II) fglrx(0): Modeline "640x480"x60.0   72.30  640 1414 1446 1526  480 771 776 790 +hsync +vsync (47.4 kHz)
[    22.234] (II) fglrx(0): EDID for output DFP1
[    22.234] (II) fglrx(0): EDID for output CRT1
[    22.234] (II) fglrx(0): Output LVDS connected
[    22.234] (II) fglrx(0): Output DFP1 disconnected
[    22.235] (II) fglrx(0): Output CRT1 disconnected
[    22.235] (II) fglrx(0): Using exact sizes for initial modes
[    22.235] (II) fglrx(0): Output LVDS using initial mode 1366x768
[    22.235] (II) fglrx(0): Display dimensions: (340, 190) mm
[    22.235] (II) fglrx(0): DPI set to (102, 102)
[    22.235] (II) fglrx(0): Adapter ATI Mobility Radeon HD 4500/5100 Series has 2 configurable heads and 1 displays connected.
[    22.235] (==) fglrx(0):  PseudoColor visuals disabled
[    22.235] (II) Loading sub module "ramdac"
[    22.235] (II) LoadModule: "ramdac"
[    22.235] (II) Module "ramdac" already built-in
[    22.235] (==) fglrx(0): NoDRI = NO
[    22.235] (==) fglrx(0): Capabilities: 0x00000000
[    22.235] (==) fglrx(0): CapabilitiesEx: 0x00000000
[    22.235] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[    22.235] (==) fglrx(0): UseFastTLS=0
[    22.235] (==) fglrx(0): BlockSignalsOnLock=1
[    22.235] (--) Depth 24 pixmap format is 32 bpp
[    22.235] (II) Loading extension ATIFGLRXDRI
[    22.235] (II) fglrx(0): doing swlDriScreenInit
[    22.235] (II) fglrx(0): swlDriScreenInit for fglrx driver
[    22.235] ukiDynamicMajor: found major device number 252
[    22.235] ukiDynamicMajor: found major device number 252
[    22.235] ukiDynamicMajor: found major device number 252
[    22.235] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    22.235] ukiOpenDevice: node name is /dev/ati/card0
[    22.235] ukiOpenDevice: open result is 13, (OK)
[    22.235] ukiOpenByBusid: ukiOpenMinor returns 13
[    22.236] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    22.236] (II) fglrx(0): [uki] DRM interface version 1.0
[    22.236] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[    22.236] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[    22.236] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7fccad6a2000
[    22.236] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[    22.236] (II) fglrx(0): [uki] added 1 reserved context for kernel
[    22.236] (II) fglrx(0): swlDriScreenInit done
[    22.236] (II) fglrx(0): Kernel Module Version Information:
[    22.236] (II) fglrx(0):     Name: fglrx
[    22.236] (II) fglrx(0):     Version: 8.97.2
[    22.236] (II) fglrx(0):     Date: Nov 16 2012
[    22.236] (II) fglrx(0):     Desc: ATI FireGL DRM kernel module
[    22.236] (II) fglrx(0): Kernel Module version matches driver.
[    22.236] (II) fglrx(0): Kernel Module Build Time Information:
[    22.236] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        3.2.0-4-amd64
[    22.236] (II) fglrx(0):     Build-Kernel MODVERSIONS:        no
[    22.236] (II) fglrx(0):     Build-Kernel __SMP__:            no
[    22.236] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
[    22.236] (II) fglrx(0): [uki] register handle = 0x00004000
[    22.263] (II) fglrx(0): DRI initialization successfull
[    22.277] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01004000
[    22.282] (==) fglrx(0): Backing store disabled
[    22.282] (II) Loading extension FGLRXEXTENSION
[    22.282] (**) fglrx(0): DPMS enabled
[    22.282] (II) fglrx(0): Initialized in-driver Xinerama extension
[    22.282] (**) fglrx(0): Textured Video is enabled.
[    22.282] (II) LoadModule: "glesx"
[    22.283] (II) Loading /usr/lib/xorg/modules/glesx.so
[    22.434] (II) Module glesx: vendor="X.Org Foundation"
[    22.435]     compiled for 1.4.99.906, module version = 1.0.0
[    22.435] (II) Loading extension GLESX
[    22.435] (II) fglrx(0): GLESX enableFlags = 528
[    22.447] (II) fglrx(0): GLESX is enabled
[    22.447] (II) LoadModule: "amdxmm"
[    22.448] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[    22.465] (II) Module amdxmm: vendor="X.Org Foundation"
[    22.465]     compiled for 1.4.99.906, module version = 2.0.0
[    22.466] (II) Loading extension AMDXVOPL
[    22.466] (II) Loading extension AMDXVBA
[    22.483] (II) fglrx(0): UVD feature is enabled(II) fglrx(0): 
[    22.487] (II) fglrx(0): Enable composite support successfully
[    22.487] (WW) fglrx(0): Option "VendorName" is not used
[    22.487] (WW) fglrx(0): Option "ModelName" is not used
[    22.487] (II) fglrx(0): X context handle = 0x1
[    22.487] (II) fglrx(0): [DRI] installation complete
[    22.487] (==) fglrx(0): Silken mouse enabled
[    22.488] (==) fglrx(0): Using HW cursor of display infrastructure!
[    22.488] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[    22.488] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[    22.488] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[    23.483] (--) RandR disabled
[    23.483] (II) Initializing built-in extension Generic Event Extension
[    23.483] (II) Initializing built-in extension SHAPE
[    23.483] (II) Initializing built-in extension MIT-SHM
[    23.483] (II) Initializing built-in extension XInputExtension
[    23.483] (II) Initializing built-in extension XTEST
[    23.483] (II) Initializing built-in extension BIG-REQUESTS
[    23.483] (II) Initializing built-in extension SYNC
[    23.483] (II) Initializing built-in extension XKEYBOARD
[    23.483] (II) Initializing built-in extension XC-MISC
[    23.483] (II) Initializing built-in extension SECURITY
[    23.483] (II) Initializing built-in extension XINERAMA
[    23.483] (II) Initializing built-in extension XFIXES
[    23.483] (II) Initializing built-in extension RENDER
[    23.483] (II) Initializing built-in extension RANDR
[    23.483] (II) Initializing built-in extension COMPOSITE
[    23.483] (II) Initializing built-in extension DAMAGE
[    23.483] (II) SELinux: Disabled on system
[    23.486] ukiDynamicMajor: found major device number 252
[    23.486] ukiDynamicMajor: found major device number 252
[    23.486] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    23.486] ukiOpenDevice: node name is /dev/ati/card0
[    23.486] ukiOpenDevice: open result is 14, (OK)
[    23.486] ukiOpenByBusid: ukiOpenMinor returns 14
[    23.486] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    25.297] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[    25.557] (II) fglrx(0): Enable the clock gating!
[    25.557] (II) fglrx(0): Setting screen physical size to 361 x 203
[    26.047] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    26.047] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    26.047] (II) LoadModule: "evdev"
[    26.047] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    26.062] (II) Module evdev: vendor="X.Org Foundation"
[    26.062]     compiled for 1.12.1, module version = 2.7.0
[    26.062]     Module class: X.Org XInput Driver
[    26.062]     ABI class: X.Org XInput driver, version 16.0
[    26.062] (II) Using input driver 'evdev' for 'Power Button'
[    26.062] (**) Power Button: always reports core events
[    26.062] (**) evdev: Power Button: Device: "/dev/input/event4"
[    26.063] (--) evdev: Power Button: Vendor 0 Product 0x1
[    26.063] (--) evdev: Power Button: Found keys
[    26.063] (II) evdev: Power Button: Configuring as keyboard
[    26.063] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[    26.063] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    26.063] (**) Option "xkb_rules" "evdev"
[    26.063] (**) Option "xkb_model" "pc105"
[    26.063] (**) Option "xkb_layout" "pl"
[    26.117] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    26.117] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    26.117] (II) Using input driver 'evdev' for 'Video Bus'
[    26.117] (**) Video Bus: always reports core events
[    26.117] (**) evdev: Video Bus: Device: "/dev/input/event5"
[    26.117] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    26.117] (--) evdev: Video Bus: Found keys
[    26.117] (II) evdev: Video Bus: Configuring as keyboard
[    26.117] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:06/LNXVIDEO:01/input/input5/event5"
[    26.117] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    26.117] (**) Option "xkb_rules" "evdev"
[    26.118] (**) Option "xkb_model" "pc105"
[    26.118] (**) Option "xkb_layout" "pl"
[    26.118] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    26.118] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    26.118] (II) Using input driver 'evdev' for 'Power Button'
[    26.118] (**) Power Button: always reports core events
[    26.118] (**) evdev: Power Button: Device: "/dev/input/event1"
[    26.118] (--) evdev: Power Button: Vendor 0 Product 0x1
[    26.118] (--) evdev: Power Button: Found keys
[    26.118] (II) evdev: Power Button: Configuring as keyboard
[    26.118] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[    26.118] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    26.118] (**) Option "xkb_rules" "evdev"
[    26.119] (**) Option "xkb_model" "pc105"
[    26.119] (**) Option "xkb_layout" "pl"
[    26.119] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[    26.119] (II) No input driver specified, ignoring this device.
[    26.119] (II) This device may have been added with another device file.
[    26.120] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    26.120] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    26.120] (II) Using input driver 'evdev' for 'Sleep Button'
[    26.120] (**) Sleep Button: always reports core events
[    26.120] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[    26.120] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    26.120] (--) evdev: Sleep Button: Found keys
[    26.120] (II) evdev: Sleep Button: Configuring as keyboard
[    26.120] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[    26.120] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    26.120] (**) Option "xkb_rules" "evdev"
[    26.120] (**) Option "xkb_model" "pc105"
[    26.120] (**) Option "xkb_layout" "pl"
[    26.121] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event15)
[    26.121] (II) No input driver specified, ignoring this device.
[    26.121] (II) This device may have been added with another device file.
[    26.121] (II) config/udev: Adding input device HP Webcam (/dev/input/event10)
[    26.121] (**) HP Webcam: Applying InputClass "evdev keyboard catchall"
[    26.121] (II) Using input driver 'evdev' for 'HP Webcam'
[    26.121] (**) HP Webcam: always reports core events
[    26.121] (**) evdev: HP Webcam: Device: "/dev/input/event10"
[    26.121] (--) evdev: HP Webcam: Vendor 0x64e Product 0xc107
[    26.121] (--) evdev: HP Webcam: Found keys
[    26.121] (II) evdev: HP Webcam: Configuring as keyboard
[    26.121] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input10/event10"
[    26.121] (II) XINPUT: Adding extended input device "HP Webcam" (type: KEYBOARD, id 10)
[    26.121] (**) Option "xkb_rules" "evdev"
[    26.121] (**) Option "xkb_model" "pc105"
[    26.121] (**) Option "xkb_layout" "pl"
[    26.122] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
[    26.122] (II) No input driver specified, ignoring this device.
[    26.122] (II) This device may have been added with another device file.
[    26.123] (II) config/udev: Adding input device HDA ATI SB Mic (/dev/input/event12)
[    26.123] (II) No input driver specified, ignoring this device.
[    26.123] (II) This device may have been added with another device file.
[    26.123] (II) config/udev: Adding input device HDA ATI SB Line-out (/dev/input/event13)
[    26.123] (II) No input driver specified, ignoring this device.
[    26.123] (II) This device may have been added with another device file.
[    26.123] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    26.123] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    26.123] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    26.123] (**) AT Translated Set 2 keyboard: always reports core events
[    26.123] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    26.123] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    26.123] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    26.123] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    26.124] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    26.124] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[    26.124] (**) Option "xkb_rules" "evdev"
[    26.124] (**) Option "xkb_model" "pc105"
[    26.124] (**) Option "xkb_layout" "pl"
[    26.124] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event16)
[    26.124] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    26.124] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    26.124] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    26.124] (II) LoadModule: "synaptics"
[    26.125] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    26.141] (II) Module synaptics: vendor="X.Org Foundation"
[    26.141]     compiled for 1.12.4, module version = 1.6.2
[    26.141]     Module class: X.Org XInput Driver
[    26.141]     ABI class: X.Org XInput driver, version 16.0
[    26.141] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    26.141] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    26.141] (**) Option "Device" "/dev/input/event16"
[    26.172] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[    26.172] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[    26.172] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    26.172] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    26.172] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right
[    26.172] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    26.172] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    26.172] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    26.180] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input16/event16"
[    26.180] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[    26.180] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    26.180] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[    26.180] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
[    26.181] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    26.181] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    26.181] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    26.181] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    26.181] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    26.182] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[    26.182] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    26.182] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event14)
[    26.182] (II) No input driver specified, ignoring this device.
[    26.182] (II) This device may have been added with another device file.
[    26.183] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[    26.183] (II) No input driver specified, ignoring this device.
[    26.183] (II) This device may have been added with another device file.
[    26.184] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[    26.184] (II) No input driver specified, ignoring this device.
[    26.184] (II) This device may have been added with another device file.
[    26.185] (II) config/udev: Adding input device MCE IR Keyboard/Mouse (ene_ir) (/dev/input/event8)
[    26.185] (**) MCE IR Keyboard/Mouse (ene_ir): Applying InputClass "evdev pointer catchall"
[    26.185] (**) MCE IR Keyboard/Mouse (ene_ir): Applying InputClass "evdev keyboard catchall"
[    26.185] (II) Using input driver 'evdev' for 'MCE IR Keyboard/Mouse (ene_ir)'
[    26.185] (**) MCE IR Keyboard/Mouse (ene_ir): always reports core events
[    26.185] (**) evdev: MCE IR Keyboard/Mouse (ene_ir): Device: "/dev/input/event8"
[    26.185] (--) evdev: MCE IR Keyboard/Mouse (ene_ir): Vendor 0 Product 0
[    26.185] (--) evdev: MCE IR Keyboard/Mouse (ene_ir): Found 3 mouse buttons
[    26.185] (--) evdev: MCE IR Keyboard/Mouse (ene_ir): Found relative axes
[    26.185] (--) evdev: MCE IR Keyboard/Mouse (ene_ir): Found x and y relative axes
[    26.185] (--) evdev: MCE IR Keyboard/Mouse (ene_ir): Found keys
[    26.185] (II) evdev: MCE IR Keyboard/Mouse (ene_ir): Configuring as mouse
[    26.185] (II) evdev: MCE IR Keyboard/Mouse (ene_ir): Configuring as keyboard
[    26.186] (**) evdev: MCE IR Keyboard/Mouse (ene_ir): YAxisMapping: buttons 4 and 5
[    26.186] (**) evdev: MCE IR Keyboard/Mouse (ene_ir): EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    26.186] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event8"
[    26.186] (II) XINPUT: Adding extended input device "MCE IR Keyboard/Mouse (ene_ir)" (type: KEYBOARD, id 13)
[    26.186] (**) Option "xkb_rules" "evdev"
[    26.186] (**) Option "xkb_model" "pc105"
[    26.186] (**) Option "xkb_layout" "pl"
[    26.186] (II) evdev: MCE IR Keyboard/Mouse (ene_ir): initialized for relative axes.
[    26.187] (**) MCE IR Keyboard/Mouse (ene_ir): (accel) keeping acceleration scheme 1
[    26.187] (**) MCE IR Keyboard/Mouse (ene_ir): (accel) acceleration profile 0
[    26.187] (**) MCE IR Keyboard/Mouse (ene_ir): (accel) acceleration factor: 2.000
[    26.187] (**) MCE IR Keyboard/Mouse (ene_ir): (accel) acceleration threshold: 4
[    26.188] (II) config/udev: Adding input device MCE IR Keyboard/Mouse (ene_ir) (/dev/input/mouse0)
[    26.188] (II) No input driver specified, ignoring this device.
[    26.188] (II) This device may have been added with another device file.
[    26.189] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event9)
[    26.189] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    26.189] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[    26.189] (**) HP WMI hotkeys: always reports core events
[    26.189] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event9"
[    26.189] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[    26.189] (--) evdev: HP WMI hotkeys: Found keys
[    26.189] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[    26.189] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event9"
[    26.189] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 14)
[    26.189] (**) Option "xkb_rules" "evdev"
[    26.189] (**) Option "xkb_model" "pc105"
[    26.189] (**) Option "xkb_layout" "pl"
[    26.191] (II) config/udev: Adding input device ENE eHome Infrared Remote Receiver (/dev/input/event6)
[    26.191] (**) ENE eHome Infrared Remote Receiver: Applying InputClass "evdev keyboard catchall"
[    26.191] (II) Using input driver 'evdev' for 'ENE eHome Infrared Remote Receiver'
[    26.191] (**) ENE eHome Infrared Remote Receiver: always reports core events
[    26.191] (**) evdev: ENE eHome Infrared Remote Receiver: Device: "/dev/input/event6"
[    26.191] (--) evdev: ENE eHome Infrared Remote Receiver: Vendor 0 Product 0
[    26.191] (--) evdev: ENE eHome Infrared Remote Receiver: Found keys
[    26.191] (II) evdev: ENE eHome Infrared Remote Receiver: Configuring as keyboard
[    26.191] (**) Option "config_info" "udev:/sys/devices/virtual/rc/rc0/input6/event6"
[    26.191] (II) XINPUT: Adding extended input device "ENE eHome Infrared Remote Receiver" (type: KEYBOARD, id 15)
[    26.191] (**) Option "xkb_rules" "evdev"
[    26.191] (**) Option "xkb_model" "pc105"
[    26.191] (**) Option "xkb_layout" "pl"
[    26.684] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[    48.111] (II) fglrx(0): EDID vendor "LGD", prod id 450
[    48.111] (II) fglrx(0): Printing DDC gathered Modelines:
[    48.111] (II) fglrx(0): Modeline "1366x768"x0.0   72.30  1366 1414 1446 1526  768 771 776 790 -hsync -vsync (47.4 kHz eP)
[    48.130] (II) fglrx(0): EDID vendor "LGD", prod id 450
[    48.130] (II) fglrx(0): Printing DDC gathered Modelines:
[    48.130] (II) fglrx(0): Modeline "1366x768"x0.0   72.30  1366 1414 1446 1526  768 771 776 790 -hsync -vsync (47.4 kHz eP)
[    51.270] (II) fglrx(0): EDID vendor "LGD", prod id 450
[    51.270] (II) fglrx(0): Printing DDC gathered Modelines:
[    51.270] (II) fglrx(0): Modeline "1366x768"x0.0   72.30  1366 1414 1446 1526  768 771 776 790 -hsync -vsync (47.4 kHz eP)
[   493.728] (II) config/udev: Adding input device Microsoft Bluetooth Notebook Mouse 5000 (/dev/input/mouse2)
[   493.728] (II) No input driver specified, ignoring this device.
[   493.728] (II) This device may have been added with another device file.
[   493.729] (II) config/udev: Adding input device Microsoft Bluetooth Notebook Mouse 5000 (/dev/input/event17)
[   493.729] (**) Microsoft Bluetooth Notebook Mouse 5000: Applying InputClass "evdev pointer catchall"
[   493.729] (II) Using input driver 'evdev' for 'Microsoft Bluetooth Notebook Mouse 5000'
[   493.729] (**) Microsoft Bluetooth Notebook Mouse 5000: always reports core events
[   493.729] (**) evdev: Microsoft Bluetooth Notebook Mouse 5000: Device: "/dev/input/event17"
[   493.736] (--) evdev: Microsoft Bluetooth Notebook Mouse 5000: Vendor 0x45e Product 0x700
[   493.736] (--) evdev: Microsoft Bluetooth Notebook Mouse 5000: Found 8 mouse buttons
[   493.736] (--) evdev: Microsoft Bluetooth Notebook Mouse 5000: Found scroll wheel(s)
[   493.736] (--) evdev: Microsoft Bluetooth Notebook Mouse 5000: Found relative axes
[   493.736] (--) evdev: Microsoft Bluetooth Notebook Mouse 5000: Found x and y relative axes
[   493.736] (--) evdev: Microsoft Bluetooth Notebook Mouse 5000: Found absolute axes
[   493.736] (II) evdev: Microsoft Bluetooth Notebook Mouse 5000: Forcing absolute x/y axes to exist.
[   493.736] (II) evdev: Microsoft Bluetooth Notebook Mouse 5000: Configuring as mouse
[   493.736] (II) evdev: Microsoft Bluetooth Notebook Mouse 5000: Adding scrollwheel support
[   493.736] (**) evdev: Microsoft Bluetooth Notebook Mouse 5000: YAxisMapping: buttons 4 and 5
[   493.736] (**) evdev: Microsoft Bluetooth Notebook Mouse 5000: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   493.736] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.0/bluetooth/hci0/hci0:11/input17/event17"
[   493.736] (II) XINPUT: Adding extended input device "Microsoft Bluetooth Notebook Mouse 5000" (type: MOUSE, id 16)
[   493.737] (II) evdev: Microsoft Bluetooth Notebook Mouse 5000: initialized for relative axes.
[   493.737] (WW) evdev: Microsoft Bluetooth Notebook Mouse 5000: ignoring absolute axes.
[   493.738] (**) Microsoft Bluetooth Notebook Mouse 5000: (accel) keeping acceleration scheme 1
[   493.738] (**) Microsoft Bluetooth Notebook Mouse 5000: (accel) acceleration profile 0
[   493.738] (**) Microsoft Bluetooth Notebook Mouse 5000: (accel) acceleration factor: 2.000
[   493.738] (**) Microsoft Bluetooth Notebook Mouse 5000: (accel) acceleration threshold: 4
[   531.356] (II) fglrx(0): AC Offline
[   592.621] (II) fglrx(0): AC Online
[  1230.692] (II) config/udev: removing device Microsoft Bluetooth Notebook Mouse 5000
[  1230.693] (II) evdev: Microsoft Bluetooth Notebook Mouse 5000: Close
[  1230.693] (II) UnloadModule: "evdev"
[  1391.624] (II) fglrx(0): AC Offline
[  1429.070] (II) config/udev: Adding input device Microsoft Bluetooth Notebook Mouse 5000 (/dev/input/mouse2)
[  1429.070] (II) No input driver specified, ignoring this device.
[  1429.070] (II) This device may have been added with another device file.
[  1429.070] (II) config/udev: Adding input device Microsoft Bluetooth Notebook Mouse 5000 (/dev/input/event17)
[  1429.070] (**) Microsoft Bluetooth Notebook Mouse 5000: Applying InputClass "evdev pointer catchall"
[  1429.070] (II) Using input driver 'evdev' for 'Microsoft Bluetooth Notebook Mouse 5000'
[  1429.070] (**) Microsoft Bluetooth Notebook Mouse 5000: always reports core events
[  1429.070] (**) evdev: Microsoft Bluetooth Notebook Mouse 5000: Device: "/dev/input/event17"
[  1429.076] (--) evdev: Microsoft Bluetooth Notebook Mouse 5000: Vendor 0x45e Product 0x700
[  1429.076] (--) evdev: Microsoft Bluetooth Notebook Mouse 5000: Found 8 mouse buttons
[  1429.076] (--) evdev: Microsoft Bluetooth Notebook Mouse 5000: Found scroll wheel(s)
[  1429.076] (--) evdev: Microsoft Bluetooth Notebook Mouse 5000: Found relative axes
[  1429.076] (--) evdev: Microsoft Bluetooth Notebook Mouse 5000: Found x and y relative axes
[  1429.076] (--) evdev: Microsoft Bluetooth Notebook Mouse 5000: Found absolute axes
[  1429.076] (II) evdev: Microsoft Bluetooth Notebook Mouse 5000: Forcing absolute x/y axes to exist.
[  1429.076] (II) evdev: Microsoft Bluetooth Notebook Mouse 5000: Configuring as mouse
[  1429.076] (II) evdev: Microsoft Bluetooth Notebook Mouse 5000: Adding scrollwheel support
[  1429.076] (**) evdev: Microsoft Bluetooth Notebook Mouse 5000: YAxisMapping: buttons 4 and 5
[  1429.076] (**) evdev: Microsoft Bluetooth Notebook Mouse 5000: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  1429.076] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.0/bluetooth/hci0/hci0:11/input18/event17"
[  1429.076] (II) XINPUT: Adding extended input device "Microsoft Bluetooth Notebook Mouse 5000" (type: MOUSE, id 16)
[  1429.077] (II) evdev: Microsoft Bluetooth Notebook Mouse 5000: initialized for relative axes.
[  1429.077] (WW) evdev: Microsoft Bluetooth Notebook Mouse 5000: ignoring absolute axes.
[  1429.077] (**) Microsoft Bluetooth Notebook Mouse 5000: (accel) keeping acceleration scheme 1
[  1429.077] (**) Microsoft Bluetooth Notebook Mouse 5000: (accel) acceleration profile 0
[  1429.077] (**) Microsoft Bluetooth Notebook Mouse 5000: (accel) acceleration factor: 2.000
[  1429.077] (**) Microsoft Bluetooth Notebook Mouse 5000: (accel) acceleration threshold: 4
[  1433.550] (II) fglrx(0): AC Online
[  4288.492] (II) fglrx(0): AC Offline
[  4315.207] (II) config/udev: removing device Microsoft Bluetooth Notebook Mouse 5000
[  4315.208] (II) evdev: Microsoft Bluetooth Notebook Mouse 5000: Close
[  4315.209] (II) UnloadModule: "evdev"
[  4343.311] (II) fglrx(0): AC Online

Kod: Zaznacz cały

cat /etc/X11/xorg.conf
Section "ServerLayout"
    Identifier     "aticonfig Layout"
    Screen      0  "aticonfig-Screen[0]-0" 0 0
EndSection

Section "Module"
EndSection

Section "Monitor"
    Identifier   "aticonfig-Monitor[0]-0"
    Option        "VendorName" "ATI Proprietary Driver"
    Option        "ModelName" "Generic Autodetecting Monitor"
    Option        "DPMS" "true"
EndSection

Section "Device"
    Identifier  "aticonfig-Device[0]-0"
    Driver      "fglrx"
    BusID       "PCI:1:0:0"
EndSection

Section "Screen"
    Identifier "aticonfig-Screen[0]-0"
    Device     "aticonfig-Device[0]-0"
    Monitor    "aticonfig-Monitor[0]-0"
    DefaultDepth     24
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

uboot · Post autor: **uboot** » 06 grudnia 2013, 22:13

Kod: Zaznacz cały

dmesg
[    0.000000]  0100000000 - 0140000000 page 2M
[    0.000000] kernel direct mapping tables up to 140000000 @ bfeeb000-bfeed000
[    0.000000] RAMDISK: 36c8c000 - 3763e000
[    0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HP    )
[    0.000000] ACPI: XSDT 00000000bfefe120 0005C (v01 HPQOEM SLIC-MPC 00000003      01000013)
[    0.000000] ACPI: FACP 00000000bfefd000 000F4 (v04 HP     3060     00000003 MSFT 01000013)
[    0.000000] ACPI: DSDT 00000000bfef0000 09666 (v01 HP     3060     F0000000 MSFT 01000013)
[    0.000000] ACPI: FACS 00000000bfe61000 00040
[    0.000000] ACPI: HPET 00000000bfefc000 00038 (v01 HP     3060     00000001 MSFT 01000013)
[    0.000000] ACPI: APIC 00000000bfefb000 00084 (v02 HP     3060     00000001 MSFT 01000013)
[    0.000000] ACPI: MCFG 00000000bfefa000 0003C (v01 HP     3060     00000001 MSFT 01000013)
[    0.000000] ACPI: BOOT 00000000bfeef000 00028 (v01 HP     3060     00000001 MSFT 01000013)
[    0.000000] ACPI: SLIC 00000000bfeee000 00176 (v01 HPQOEM SLIC-MPC 06040000 MSFT 01000013)
[    0.000000] ACPI: SSDT 00000000bfeed000 002B4 (v01 AMD    PowerNow 00000001 AMD  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000140000000
[    0.000000] Initmem setup node 0 0000000000000000-0000000140000000
[    0.000000]   NODE_DATA [000000013fffb000 - 000000013fffffff]
[    0.000000]  [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013b600000-ffff88013edfffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00140000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[6] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x000bfd70
[    0.000000]     0: 0x000bfdbf -> 0x000bfe58
[    0.000000]     0: 0x000bfebf -> 0x000bfeed
[    0.000000]     0: 0x000bfeff -> 0x000bff00
[    0.000000]     0: 0x00100000 -> 0x00140000
[    0.000000] On node 0 totalpages: 1048007
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3922 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 767600 pages, LIFO batch:31
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 258560 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x1002a201 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000bfd70000 - 00000000bfdbf000
[    0.000000] PM: Registered nosave memory: 00000000bfe58000 - 00000000bfebf000
[    0.000000] PM: Registered nosave memory: 00000000bfeed000 - 00000000bfeff000
[    0.000000] PM: Registered nosave memory: 00000000bff00000 - 00000000e0000000
[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000e4000000
[    0.000000] PM: Registered nosave memory: 00000000e4000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
[    0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at bff00000 (gap: bff00000:20100000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013fc00000 s82944 r8192 d23552 u524288
[    0.000000] pcpu-alloc: s82944 r8192 d23552 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1030082
[    0.000000] Policy zone: Normal
[     0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64  root=UUID=000ffb68-190a-4269-b266-f9ecef852601 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 4049724k/5242880k available (3426k kernel code, 1050852k absent, 142304k reserved, 3312k data, 576k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:33024 nr_irqs:712 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2099.019 MHz processor.
[    0.008010] Calibrating delay loop (skipped), value calculated using timer frequency.. 4198.03 BogoMIPS (lpj=8396076)
[    0.008022] pid_max: default: 32768 minimum: 301
[    0.008193] Security Framework initialized
[    0.008206] AppArmor: AppArmor disabled by boot time parameter
[    0.008946] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.014514] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.016818] Mount-cache hash table entries: 256
[    0.017177] Initializing cgroup subsys cpuacct
[    0.017190] Initializing cgroup subsys memory
[    0.017228] Initializing cgroup subsys devices
[    0.017237] Initializing cgroup subsys freezer
[    0.017243] Initializing cgroup subsys net_cls
[    0.017249] Initializing cgroup subsys blkio
[    0.017273] Initializing cgroup subsys perf_event
[    0.017352] tseg: 00bff00000
[    0.017358] CPU: Physical Processor ID: 0
[    0.017361] CPU: Processor Core ID: 0
[    0.017366] mce: CPU supports 5 MCE banks
[    0.018250] ACPI: Core revision 20110623
[    0.028677] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.070240] CPU0: AMD Athlon(tm) X2 Dual-Core QL-64 stepping 01
[    0.072003] APIC calibration not consistent with PM-Timer: 714ms instead of 100ms
[    0.072003] APIC delta adjusted to PM-Timer: 1249483 (8927454)
[    0.072003] Performance Events: AMD PMU driver.
[    0.072003] ... version:                0
[    0.072003] ... bit width:              48
[    0.072003] ... generic registers:      4
[    0.072003] ... value mask:             0000ffffffffffff
[    0.072003] ... max period:             00007fffffffffff
[    0.072003] ... fixed-purpose events:   0
[    0.072003] ... event mask:             000000000000000f
[    0.072003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.072003] Booting Node   0, Processors  #1
[    0.072003] smpboot cpu 1: start_ip = 9a000
[    0.160009] TSC synchronization [CPU#0 -> CPU#1]:
[    0.160009] Measured 61597107 cycles TSC warp between CPUs, turning off TSC clock.
[    0.160009] Marking TSC unstable due to check_tsc_sync_source failed
[    0.160056] NMI watchdog enabled, takes one hw-pmu counter.
[    0.160107] Brought up 2 CPUs
[    0.160114] Total of 2 processors activated (8396.54 BogoMIPS).
[    0.161072] devtmpfs: initialized
[    0.165136] PM: Registering ACPI NVS region at bfe58000 (421888 bytes)
[    0.165136] print_constraints: dummy: 
[    0.165136] NET: Registered protocol family 16
[    0.165136] TOM: 00000000c0000000 aka 3072M
[    0.165136] Fam 10h mmconf [mem 0xe0000000-0xe0ffffff]
[    0.165136] TOM2: 0000000140000000 aka 5120M
[    0.165137] Extended Config Space enabled on 0 nodes
[    0.165166] ACPI: bus type pci registered
[    0.165410] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.165418] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[    0.186475] PCI: Using configuration type 1 for base access
[    0.186985] mtrr: your CPUs had inconsistent fixed MTRR settings
[    0.186990] mtrr: probably your BIOS does not setup all CPUs.
[    0.186995] mtrr: corrected configuration.
[    0.188525] bio: create slab <bio-0> at 0
[    0.188525] ACPI: Added _OSI(Module Device)
[    0.188525] ACPI: Added _OSI(Processor Device)
[    0.188525] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.188525] ACPI: Added _OSI(Processor Aggregator Device)
[    0.190452] ACPI: EC: Look up EC in DSDT
[    0.193823] ACPI: Executed 1 blocks of module-level executable AML code
[    0.200757] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.208118] ACPI: Interpreter enabled
[    0.208118] ACPI: (supports S0 S3 S4 S5)
[    0.208134] ACPI: Using IOAPIC for interrupt routing
[    0.218251] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
[    0.218251] ACPI: No dock devices found.
[    0.218251] HEST: Table not found.
[    0.218251] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.220504] \_SB_.PCI0:_OSC request failed
[    0.220507] _OSC request data:1 8 0 
[    0.220513] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.221782] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.221786] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.221789] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.221792] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
[    0.221796] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
[    0.221799] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
[    0.221802] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
[    0.221806] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[    0.221809] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[    0.221812] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[    0.221816] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[    0.221820] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[    0.221823] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[    0.221827] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
[    0.221830] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
[    0.221833] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
[    0.221836] pci_root PNP0A08:00: host bridge window [mem 0xe4000000-0xffffffff]
[     0.221847] pci_root PNP0A08:00: ignoring host bridge window [mem  0x000cc000-0x000cffff] (conflicts with Video ROM [mem  0x000c0000-0x000cf7ff])
[    0.221873] pci 0000:00:00.0: [1022:9600] type 0 class 0x000600
[    0.222004] pci 0000:00:02.0: [1022:9603] type 1 class 0x000604
[    0.222066] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.222129] pci 0000:00:04.0: [1022:9604] type 1 class 0x000604
[    0.222185] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.222212] pci 0000:00:05.0: [1022:9605] type 1 class 0x000604
[    0.222269] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[    0.222294] pci 0000:00:06.0: [1022:9606] type 1 class 0x000604
[    0.222351] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[    0.222380] pci 0000:00:0a.0: [1022:9609] type 1 class 0x000604
[    0.222437] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
[    0.222478] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[    0.222504] pci 0000:00:11.0: reg 10: [io  0x6038-0x603f]
[    0.222517] pci 0000:00:11.0: reg 14: [io  0x604c-0x604f]
[    0.222530] pci 0000:00:11.0: reg 18: [io  0x6030-0x6037]
[    0.222543] pci 0000:00:11.0: reg 1c: [io  0x6048-0x604b]
[    0.222555] pci 0000:00:11.0: reg 20: [io  0x6010-0x601f]
[    0.222568] pci 0000:00:11.0: reg 24: [mem 0xd2408000-0xd24083ff]
[    0.222644] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[    0.222662] pci 0000:00:12.0: reg 10: [mem 0xd2407000-0xd2407fff]
[    0.222748] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03
[    0.222765] pci 0000:00:12.1: reg 10: [mem 0xd2406000-0xd2406fff]
[    0.222857] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[    0.222857] pci 0000:00:12.2: reg 10: [mem 0xd2408500-0xd24085ff]
[    0.222857] pci 0000:00:12.2: supports D1 D2
[    0.222857] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.222857] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[    0.222857] pci 0000:00:13.0: reg 10: [mem 0xd2405000-0xd2405fff]
[    0.222938] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03
[    0.222955] pci 0000:00:13.1: reg 10: [mem 0xd2404000-0xd2404fff]
[    0.223049] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[    0.224903] pci 0000:00:13.2: reg 10: [mem 0xd2408400-0xd24084ff]
[    0.224903] pci 0000:00:13.2: supports D1 D2
[    0.224903] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.224903] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[    0.224903] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101
[    0.224903] pci 0000:00:14.1: reg 10: [io  0x0000-0x0007]
[    0.224903] pci 0000:00:14.1: reg 14: [io  0x0000-0x0003]
[    0.224903] pci 0000:00:14.1: reg 18: [io  0x0000-0x0007]
[    0.224903] pci 0000:00:14.1: reg 1c: [io  0x0000-0x0003]
[    0.224903] pci 0000:00:14.1: reg 20: [io  0x6000-0x600f]
[    0.224903] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[    0.224903] pci 0000:00:14.2: reg 10: [mem 0xd2400000-0xd2403fff 64bit]
[    0.224903] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.224903] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[    0.224903] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[    0.224903] pci 0000:00:18.0: [1022:1300] type 0 class 0x000600
[    0.224903] pci 0000:00:18.1: [1022:1301] type 0 class 0x000600
[    0.224903] pci 0000:00:18.2: [1022:1302] type 0 class 0x000600
[    0.224903] pci 0000:00:18.3: [1022:1303] type 0 class 0x000600
[    0.224903] pci 0000:00:18.4: [1022:1304] type 0 class 0x000600
[    0.225016] pci 0000:01:00.0: [1002:9553] type 0 class 0x000300
[    0.225031] pci 0000:01:00.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
[    0.225041] pci 0000:01:00.0: reg 14: [io  0x5000-0x50ff]
[    0.225052] pci 0000:01:00.0: reg 18: [mem 0xd2300000-0xd230ffff]
[    0.225083] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[    0.225125] pci 0000:01:00.0: supports D1 D2
[    0.225156] pci 0000:01:00.1: [1002:aa38] type 0 class 0x000403
[    0.225169] pci 0000:01:00.1: reg 10: [mem 0xd2310000-0xd2313fff]
[    0.225252] pci 0000:01:00.1: supports D1 D2
[    0.236038] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[    0.236044] pci 0000:00:02.0:   bridge window [io  0x5000-0x5fff]
[    0.236049] pci 0000:00:02.0:   bridge window [mem 0xd2300000-0xd23fffff]
[    0.236055] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.236098] pci 0000:00:04.0: PCI bridge to [bus 02-07]
[    0.236104] pci 0000:00:04.0:   bridge window [io  0x3000-0x4fff]
[    0.236108] pci 0000:00:04.0:   bridge window [mem 0xd1300000-0xd22fffff]
[    0.236114] pci 0000:00:04.0:   bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
[    0.236176] pci 0000:08:00.0: [168c:002b] type 0 class 0x000280
[    0.236199] pci 0000:08:00.0: reg 10: [mem 0xd1200000-0xd120ffff 64bit]
[    0.236296] pci 0000:08:00.0: supports D1
[    0.236298] pci 0000:08:00.0: PME# supported from D0 D1 D3hot
[    0.244036] pci 0000:00:05.0: PCI bridge to [bus 08-08]
[    0.244044] pci 0000:00:05.0:   bridge window [mem 0xd1200000-0xd12fffff]
[    0.244108] pci 0000:09:00.0: [10ec:8168] type 0 class 0x000200
[    0.244125] pci 0000:09:00.0: reg 10: [io  0x2000-0x20ff]
[    0.244152] pci 0000:09:00.0: reg 18: [mem 0xd1004000-0xd1004fff 64bit pref]
[    0.244169] pci 0000:09:00.0: reg 20: [mem 0xd1000000-0xd1003fff 64bit pref]
[    0.244181] pci 0000:09:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
[    0.244241] pci 0000:09:00.0: supports D1 D2
[    0.244244] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.252036] pci 0000:00:06.0: PCI bridge to [bus 09-09]
[    0.252042] pci 0000:00:06.0:   bridge window [io  0x2000-0x2fff]
[    0.252050] pci 0000:00:06.0:   bridge window [mem 0xd1000000-0xd10fffff 64bit pref]
[    0.252090] pci 0000:00:0a.0: PCI bridge to [bus 0a-0a]
[    0.252097] pci 0000:00:0a.0:   bridge window [mem 0xd1100000-0xd11fffff]
[    0.252203] pci 0000:00:14.4: PCI bridge to [bus 80-8f] (subtractive decode)
[    0.252209] pci 0000:00:14.4:   bridge window [io  0x1000-0x1fff]
[    0.252219] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.252223] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.252227] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.252231] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[    0.252235] pci 0000:00:14.4:   bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[    0.252239] pci 0000:00:14.4:   bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[    0.252242] pci 0000:00:14.4:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[    0.252246] pci 0000:00:14.4:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.252249] pci 0000:00:14.4:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.252253] pci 0000:00:14.4:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[    0.252256] pci 0000:00:14.4:   bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[    0.252260] pci 0000:00:14.4:   bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[    0.252263] pci 0000:00:14.4:   bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[    0.252267] pci 0000:00:14.4:   bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[    0.252271] pci 0000:00:14.4:   bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[    0.252274] pci 0000:00:14.4:   bridge window [mem 0xe4000000-0xffffffff] (subtractive decode)
[    0.252340] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.252740] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB2_._PRT]
[    0.252820] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
[    0.252888] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
[    0.252950] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[    0.253018] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB10._PRT]
[    0.253149] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[    0.253325] \_SB_.PCI0:_OSC request failed
[    0.253327] _OSC request data:1 1f 0 
[    0.253332]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.253378] \_SB_.PCI0:_OSC request failed
[    0.253380] _OSC request data:1 0 1d 
[    0.253387]  pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[    0.253389] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.264249] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    0.264317] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    0.264377] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    0.264437] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    0.264497] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    0.264557] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    0.264617] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    0.264678] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[    0.264950] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.264950] vgaarb: loaded
[    0.264950] vgaarb: bridge control possible 0000:01:00.0
[    0.264950] PCI: Using ACPI for IRQ routing
[    0.266542] PCI: pci_cache_line_size set to 64 bytes
[    0.266703] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
[    0.266707] reserve RAM buffer: 00000000bfd70000 - 00000000bfffffff 
[    0.266710] reserve RAM buffer: 00000000bfe58000 - 00000000bfffffff 
[    0.266714] reserve RAM buffer: 00000000bfeed000 - 00000000bfffffff 
[    0.266718] reserve RAM buffer: 00000000bff00000 - 00000000bfffffff 
[    0.266939] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.266946] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[    0.269051] Switching to clocksource hpet
[    0.270506] pnp: PnP ACPI init
[    0.270534] ACPI: bus type pnp registered
[    0.271218] pnp 00:00: [bus 00-ff]
[    0.271225] pnp 00:00: [io  0x0000-0x0cf7 window]
[    0.271228] pnp 00:00: [io  0x0d00-0xffff window]
[    0.271232] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    0.271235] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    0.271238] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    0.271242] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    0.271247] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    0.271251] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    0.271255] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    0.271259] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    0.271263] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    0.271267] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    0.271271] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    0.271275] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    0.271280] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    0.271284] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
[    0.271288] pnp 00:00: [mem 0xe4000000-0xffffffff window]
[    0.271292] pnp 00:00: [io  0x0cf8-0x0cff]
[    0.271402] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.271470] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[    0.271474] pnp 00:01: [mem 0xfee00000-0xfee00fff]
[    0.271569] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.271573] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.271577] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.271806] pnp 00:02: [irq 0 disabled]
[    0.271822] pnp 00:02: [irq 8]
[    0.271826] pnp 00:02: [mem 0xfed00000-0xfed003ff]
[    0.271876] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.271934] pnp 00:03: [io  0x0000-0x000f]
[    0.271937] pnp 00:03: [io  0x0081-0x008f]
[    0.271941] pnp 00:03: [io  0x00c0-0x00df]
[    0.271945] pnp 00:03: [dma 4]
[    0.271993] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.272068] pnp 00:04: [io  0x00f0-0x00fe]
[    0.272075] pnp 00:04: [irq 13]
[    0.272127] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.272171] pnp 00:05: [io  0x0070-0x0071]
[    0.272224] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.272239] pnp 00:06: [io  0x0061]
[    0.272290] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.272307] pnp 00:07: [io  0x0060]
[    0.272310] pnp 00:07: [io  0x0064]
[    0.272344] pnp 00:07: [irq 1]
[    0.272404] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.272435] pnp 00:08: [irq 12]
[    0.272501] pnp 00:08: Plug and Play ACPI device, IDs SYN1e0a SYN1e00 SYN0002 PNP0f13 (active)
[    0.272520] pnp 00:09: [io  0x0010-0x001f]
[    0.272524] pnp 00:09: [io  0x002e-0x002f]
[    0.272528] pnp 00:09: [io  0x0072-0x0073]
[    0.272531] pnp 00:09: [io  0x0080]
[    0.272533] pnp 00:09: [io  0x00b0-0x00b1]
[    0.272537] pnp 00:09: [io  0x0092]
[    0.272540] pnp 00:09: [io  0x0400-0x04cf]
[    0.272543] pnp 00:09: [io  0x04d0-0x04d1]
[    0.272546] pnp 00:09: [io  0x04d6]
[    0.272549] pnp 00:09: [io  0x0680-0x06ff]
[    0.272552] pnp 00:09: [io  0x077a]
[    0.272555] pnp 00:09: [io  0x0c00-0x0c01]
[    0.272558] pnp 00:09: [io  0x0c14]
[    0.272560] pnp 00:09: [io  0x0c50-0x0c52]
[    0.272563] pnp 00:09: [io  0x0c6c]
[    0.272567] pnp 00:09: [io  0x0c6f]
[    0.272570] pnp 00:09: [io  0x0cd0-0x0cdb]
[    0.272572] pnp 00:09: [io  0x0380-0x0387]
[    0.272680] system 00:09: [io  0x0400-0x04cf] has been reserved
[    0.272685] system 00:09: [io  0x04d0-0x04d1] has been reserved
[    0.272689] system 00:09: [io  0x04d6] has been reserved
[    0.272693] system 00:09: [io  0x0680-0x06ff] has been reserved
[    0.272697] system 00:09: [io  0x077a] has been reserved
[    0.272700] system 00:09: [io  0x0c00-0x0c01] has been reserved
[    0.272703] system 00:09: [io  0x0c14] has been reserved
[    0.272707] system 00:09: [io  0x0c50-0x0c52] has been reserved
[    0.272711] system 00:09: [io  0x0c6c] has been reserved
[    0.272714] system 00:09: [io  0x0c6f] has been reserved
[    0.272718] system 00:09: [io  0x0cd0-0x0cdb] has been reserved
[    0.272722] system 00:09: [io  0x0380-0x0387] has been reserved
[    0.272726] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.272750] pnp 00:0a: [mem 0x000e0000-0x000fffff]
[    0.272754] pnp 00:0a: [mem 0xfff00000-0xffffffff]
[    0.272835] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.272839] system 00:0a: [mem 0xfff00000-0xffffffff] has been reserved
[    0.272843] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.272886] pnp 00:0b: [io  0x0380-0x0387]
[    0.272927] pnp 00:0b: [irq 4]
[    0.272984] pnp 00:0b: Plug and Play ACPI device, IDs ENE0100 (active)
[    0.273048] pnp 00:0c: [irq 23]
[    0.273107] pnp 00:0c: Plug and Play ACPI device, IDs HPQ0004 (active)
[    0.273583] pnp: PnP ACPI: found 13 devices
[    0.273586] ACPI: ACPI bus type pnp unregistered
[    0.283226] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[    0.283234] pci 0000:09:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[    0.283242] PCI: max bus depth: 1 pci_try_num: 2
[    0.283329] pci 0000:00:06.0: BAR 14: assigned [mem 0xd2500000-0xd25fffff]
[    0.283336] pci 0000:01:00.0: BAR 6: assigned [mem 0xd2320000-0xd233ffff pref]
[    0.283340] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[    0.283345] pci 0000:00:02.0:   bridge window [io  0x5000-0x5fff]
[    0.283350] pci 0000:00:02.0:   bridge window [mem 0xd2300000-0xd23fffff]
[    0.283355] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.283363] pci 0000:00:04.0: PCI bridge to [bus 02-07]
[    0.283366] pci 0000:00:04.0:   bridge window [io  0x3000-0x4fff]
[    0.283371] pci 0000:00:04.0:   bridge window [mem 0xd1300000-0xd22fffff]
[    0.283375] pci 0000:00:04.0:   bridge window [mem 0xd0000000-0xd0ffffff 64bit pref]
[    0.283381] pci 0000:00:05.0: PCI bridge to [bus 08-08]
[    0.283386] pci 0000:00:05.0:   bridge window [mem 0xd1200000-0xd12fffff]
[    0.283394] pci 0000:09:00.0: BAR 6: assigned [mem 0xd1010000-0xd101ffff pref]
[    0.283398] pci 0000:00:06.0: PCI bridge to [bus 09-09]
[    0.283401] pci 0000:00:06.0:   bridge window [io  0x2000-0x2fff]
[    0.283406] pci 0000:00:06.0:   bridge window [mem 0xd2500000-0xd25fffff]
[    0.283410] pci 0000:00:06.0:   bridge window [mem 0xd1000000-0xd10fffff 64bit pref]
[    0.283417] pci 0000:00:0a.0: PCI bridge to [bus 0a-0a]
[    0.283421] pci 0000:00:0a.0:   bridge window [mem 0xd1100000-0xd11fffff]
[    0.283429] pci 0000:00:14.4: PCI bridge to [bus 80-8f]
[    0.283433] pci 0000:00:14.4:   bridge window [io  0x1000-0x1fff]
[    0.283471] pci 0000:00:02.0: setting latency timer to 64
[    0.283483] pci 0000:00:04.0: setting latency timer to 64
[    0.283495] pci 0000:00:05.0: setting latency timer to 64
[    0.283502] pci 0000:00:06.0: setting latency timer to 64
[    0.283510] pci 0000:00:0a.0: setting latency timer to 64
[    0.283521] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.283524] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.283527] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.283529] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.283532] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.283535] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.283538] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[    0.283541] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[    0.283544] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[    0.283547] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[    0.283550] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[    0.283553] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[    0.283556] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[    0.283559] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[    0.283562] pci_bus 0000:00: resource 18 [mem 0xc0000000-0xdfffffff]
[    0.283565] pci_bus 0000:00: resource 19 [mem 0xe4000000-0xffffffff]
[    0.283568] pci_bus 0000:01: resource 0 [io  0x5000-0x5fff]
[    0.283571] pci_bus 0000:01: resource 1 [mem 0xd2300000-0xd23fffff]
[    0.283575] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.283579] pci_bus 0000:02: resource 0 [io  0x3000-0x4fff]
[    0.283581] pci_bus 0000:02: resource 1 [mem 0xd1300000-0xd22fffff]
[    0.283584] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd0ffffff 64bit pref]
[    0.283589] pci_bus 0000:08: resource 1 [mem 0xd1200000-0xd12fffff]
[    0.283593] pci_bus 0000:09: resource 0 [io  0x2000-0x2fff]
[    0.283596] pci_bus 0000:09: resource 1 [mem 0xd2500000-0xd25fffff]
[    0.283599] pci_bus 0000:09: resource 2 [mem 0xd1000000-0xd10fffff 64bit pref]
[    0.283603] pci_bus 0000:0a: resource 1 [mem 0xd1100000-0xd11fffff]
[    0.283607] pci_bus 0000:80: resource 0 [io  0x1000-0x1fff]
[    0.283610] pci_bus 0000:80: resource 4 [io  0x0000-0x0cf7]
[    0.283613] pci_bus 0000:80: resource 5 [io  0x0d00-0xffff]
[    0.283615] pci_bus 0000:80: resource 6 [mem 0x000a0000-0x000bffff]
[    0.283618] pci_bus 0000:80: resource 7 [mem 0x000c0000-0x000c3fff]
[    0.283622] pci_bus 0000:80: resource 8 [mem 0x000c4000-0x000c7fff]
[    0.283625] pci_bus 0000:80: resource 9 [mem 0x000c8000-0x000cbfff]
[    0.283628] pci_bus 0000:80: resource 10 [mem 0x000d0000-0x000d3fff]
[    0.283631] pci_bus 0000:80: resource 11 [mem 0x000d4000-0x000d7fff]
[    0.283634] pci_bus 0000:80: resource 12 [mem 0x000d8000-0x000dbfff]
[    0.283638] pci_bus 0000:80: resource 13 [mem 0x000dc000-0x000dffff]
[    0.283641] pci_bus 0000:80: resource 14 [mem 0x000e0000-0x000e3fff]
[    0.283644] pci_bus 0000:80: resource 15 [mem 0x000e4000-0x000e7fff]
[    0.283647] pci_bus 0000:80: resource 16 [mem 0x000e8000-0x000ebfff]
[    0.283650] pci_bus 0000:80: resource 17 [mem 0x000ec000-0x000effff]
[    0.283654] pci_bus 0000:80: resource 18 [mem 0xc0000000-0xdfffffff]
[    0.283658] pci_bus 0000:80: resource 19 [mem 0xe4000000-0xffffffff]
[    0.283770] NET: Registered protocol family 2
[    0.284065] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.285990] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.291074] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.291692] TCP: Hash tables configured (established 524288 bind 65536)
[    0.291696] TCP reno registered
[    0.291721] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.291770] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.292095] NET: Registered protocol family 1
[    1.220194] pci 0000:01:00.0: Boot video device
[    1.220216] PCI: CLS 64 bytes, default 64
[    1.220312] Unpacking initramfs...
[    1.523747] Freeing initrd memory: 9928k freed
[    1.530327] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.530333] Placing 64MB software IO TLB between ffff8800bbd70000 - ffff8800bfd70000
[    1.530336] software IO TLB at phys 0xbbd70000 - 0xbfd70000
[    1.530385] Simple Boot Flag at 0x44 set to 0x1
[    1.531279] audit: initializing netlink socket (disabled)
[    1.531298] type=2000 audit(1386358937.528:1): initialized
[    1.549007] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.550633] VFS: Disk quotas dquot_6.5.2
[    1.550719] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.550873] msgmni has been set to 7929
[    1.551269] alg: No test for stdrng (krng)
[    1.551345] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.551353] io scheduler noop registered
[    1.551358] io scheduler deadline registered
[    1.551440] io scheduler cfq registered (default)
[    1.551720] pcieport 0000:00:02.0: setting latency timer to 64
[    1.551794] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
[    1.551918] pcieport 0000:00:04.0: setting latency timer to 64
[    1.551973] pcieport 0000:00:04.0: irq 41 for MSI/MSI-X
[    1.552146] pcieport 0000:00:05.0: setting latency timer to 64
[    1.552199] pcieport 0000:00:05.0: irq 42 for MSI/MSI-X
[    1.552312] pcieport 0000:00:06.0: setting latency timer to 64
[    1.552367] pcieport 0000:00:06.0: irq 43 for MSI/MSI-X
[    1.552478] pcieport 0000:00:0a.0: setting latency timer to 64
[    1.552530] pcieport 0000:00:0a.0: irq 44 for MSI/MSI-X
[    1.552732] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.552799] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.552805] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    1.553240] acpiphp: Slot [1] registered
[    1.553818] ERST: Table is not found!
[    1.553823] GHES: HEST is not enabled!
[    1.554039] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.589570] Linux agpgart interface v0.103
[    1.589967] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.615009] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.615029] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.615454] mousedev: PS/2 mouse device common for all mice
[    1.616332] rtc_cmos 00:05: RTC can wake from S4
[    1.616644] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.616723] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
[    1.616755] cpuidle: using governor ladder
[    1.616760] cpuidle: using governor menu
[    1.617290] TCP cubic registered
[    1.617441] NET: Registered protocol family 10
[    1.618680] Mobile IPv6
[    1.618687] NET: Registered protocol family 17
[    1.618698] Registering the dns_resolver key type
[    1.619145] PM: Hibernation image not present or could not be loaded.
[    1.619172] registered taskstats version 1
[    1.620647] rtc_cmos 00:05: setting system clock to 2013-12-06 19:42:19 UTC (1386358939)
[    1.620794] Initializing network drop monitor service
[    1.623965] Freeing unused kernel memory: 576k freed
[    1.624638] Write protecting the kernel read-only data: 6144k
[    1.633330] Freeing unused kernel memory: 652k freed
[    1.645137] Freeing unused kernel memory: 688k freed
[    1.653135] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.677974] udevd[49]: starting version 175
[    1.756769] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.756847] r8169 0000:09:00.0: setting latency timer to 64
[    1.756905] r8169 0000:09:00.0: irq 45 for MSI/MSI-X
[    1.757445] r8169 0000:09:00.0: eth0: RTL8168d/8111d at 0xffffc90000650000, 00:26:9e:e7:9b:03, XID 081000c0 IRQ 45
[    1.757450] r8169 0000:09:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.771176] usbcore: registered new interface driver usbfs
[    1.771211] usbcore: registered new interface driver hub
[    1.787967] usbcore: registered new device driver usb
[    1.789203] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.789381] ehci_hcd 0000:00:12.2: setting latency timer to 64
[    1.789389] ehci_hcd 0000:00:12.2: EHCI Host Controller
[    1.789450] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.789504] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.789575] QUIRK: Enable AMD PLL fix
[    1.789583] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
[    1.789649] ehci_hcd 0000:00:12.2: debug port 1
[    1.789705] ehci_hcd 0000:00:12.2: irq 17, io mem 0xd2408500
[    1.798274] SCSI subsystem initialized
[    1.804126] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.804200] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.804207] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.804214] usb usb1: Product: EHCI Host Controller
[    1.804218] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[    1.804223] usb usb1: SerialNumber: 0000:00:12.2
[    1.804558] hub 1-0:1.0: USB hub found
[    1.804569] hub 1-0:1.0: 6 ports detected
[    1.804967] ehci_hcd 0000:00:13.2: setting latency timer to 64
[    1.804975] ehci_hcd 0000:00:13.2: EHCI Host Controller
[    1.804998] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.805016] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.805057] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
[    1.805121] ehci_hcd 0000:00:13.2: debug port 1
[    1.805181] ehci_hcd 0000:00:13.2: irq 19, io mem 0xd2408400
[    1.823998] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.824137] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.824144] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.824150] usb usb2: Product: EHCI Host Controller
[    1.824155] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[    1.824160] usb usb2: SerialNumber: 0000:00:13.2
[    1.824483] hub 2-0:1.0: USB hub found
[    1.824495] hub 2-0:1.0: 6 ports detected
[    1.838429] libata version 3.00 loaded.
[    1.839561] ahci 0000:00:11.0: version 3.0
[    1.839798] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[    1.839804] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc 
[    1.843113] scsi0 : ahci
[    1.843464] scsi1 : ahci
[    1.843714] scsi2 : ahci
[    1.843901] ata1: SATA max UDMA/133 abar m1024@0xd2408000 port 0xd2408100 irq 22
[    1.843909] ata2: SATA max UDMA/133 abar m1024@0xd2408000 port 0xd2408180 irq 22
[    1.843917] ata3: SATA max UDMA/133 abar m1024@0xd2408000 port 0xd2408200 irq 22
[    1.844702] pata_atiixp 0000:00:14.1: setting latency timer to 64
[    1.847118] [Firmware Bug]: Invalid critical threshold (0)
[    1.849189] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.849333] thermal LNXTHERM:00: registered as thermal_zone0
[    1.849339] ACPI: Thermal Zone [THRM] (65 C)
[    1.869747] scsi3 : pata_atiixp
[    1.877709] scsi4 : pata_atiixp
[    1.878546] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6000 irq 14
[    1.878551] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6008 irq 15
[    1.878796] ohci_hcd 0000:00:12.0: setting latency timer to 64
[    1.878808] ohci_hcd 0000:00:12.0: OHCI Host Controller
[    1.878841] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[    1.878965] ohci_hcd 0000:00:12.0: irq 16, io mem 0xd2407000
[    1.936318] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.936328] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.936335] usb usb3: Product: OHCI Host Controller
[    1.936340] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
[    1.936346] usb usb3: SerialNumber: 0000:00:12.0
[    1.936727] hub 3-0:1.0: USB hub found
[    1.936763] hub 3-0:1.0: 3 ports detected
[    1.937659] ohci_hcd 0000:00:12.1: setting latency timer to 64
[    1.937667] ohci_hcd 0000:00:12.1: OHCI Host Controller
[    1.937688] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[    1.937777] ohci_hcd 0000:00:12.1: irq 16, io mem 0xd2406000
[    1.996189] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.996201] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.996208] usb usb4: Product: OHCI Host Controller
[    1.996213] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
[    1.996219] usb usb4: SerialNumber: 0000:00:12.1
[    1.996591] hub 4-0:1.0: USB hub found
[    1.996608] hub 4-0:1.0: 3 ports detected
[    1.996990] ohci_hcd 0000:00:13.0: setting latency timer to 64
[    1.996998] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    1.997026] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[    1.997134] ohci_hcd 0000:00:13.0: irq 18, io mem 0xd2405000
[    2.056142] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    2.056149] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.056154] usb usb5: Product: OHCI Host Controller
[    2.056159] usb usb5: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
[    2.056164] usb usb5: SerialNumber: 0000:00:13.0
[    2.056499] hub 5-0:1.0: USB hub found
[    2.056542] hub 5-0:1.0: 3 ports detected
[    2.056876] ohci_hcd 0000:00:13.1: setting latency timer to 64
[    2.056883] ohci_hcd 0000:00:13.1: OHCI Host Controller
[    2.056904] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[    2.056990] ohci_hcd 0000:00:13.1: irq 18, io mem 0xd2404000
[    2.116085] usb 1-3: new high-speed USB device number 2 using ehci_hcd
[    2.116109] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    2.116116] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.116122] usb usb6: Product: OHCI Host Controller
[    2.116126] usb usb6: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
[    2.116131] usb usb6: SerialNumber: 0000:00:13.1
[    2.116409] hub 6-0:1.0: USB hub found
[    2.116421] hub 6-0:1.0: 3 ports detected
[    2.164159] ata3: SATA link down (SStatus 0 SControl 300)
[    2.282794] usb 1-3: New USB device found, idVendor=064e, idProduct=c107
[    2.282798] usb 1-3: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    2.282802] usb 1-3: Product: HP Webcam
[    2.282805] usb 1-3: Manufacturer: SuYin
[    2.282807] usb 1-3: SerialNumber: CN0314-S30C-OV04-VH-R02.02.01
[    2.336096] ata1: softreset failed (device not ready)
[    2.336164] ata1: applying PMP SRST workaround and retrying
[    2.336191] ata2: softreset failed (device not ready)
[    2.336253] ata2: applying PMP SRST workaround and retrying
[    2.508170] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.508292] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.510017] ata1.00: ATA-8: ST9250320AS, HP07, max UDMA/100
[    2.510021] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    2.512103] ata1.00: configured for UDMA/100
[    2.512267] ata2.00: ATAPI: HL-DT-ST DVDRAM GT20L, DC03, max UDMA/100
[    2.512464] scsi 0:0:0:0: Direct-Access     ATA      ST9250320AS      HP07 PQ: 0 ANSI: 5
[    2.517175] ata2.00: configured for UDMA/100
[    2.522768] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GT20L     DC03 PQ: 0 ANSI: 5
[    2.533705] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    2.533764] sd 0:0:0:0: [sda] Write Protect is off
[    2.533767] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.533792] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.598225]  sda: sda1 sda2 sda3 < sda5 >
[    2.598853] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.602134] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.602394] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.606487] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.606495] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.607213] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.772094] usb 5-1: new full-speed USB device number 2 using ohci_hcd
[    2.933173] usb 5-1: New USB device found, idVendor=138a, idProduct=0001
[    2.933180] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.196099] usb 6-1: new full-speed USB device number 2 using ohci_hcd
[    3.378184] usb 6-1: New USB device found, idVendor=03f0, idProduct=171d
[    3.378190] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.378194] usb 6-1: Product: HP Integrated Module
[    3.378197] usb 6-1: Manufacturer: Broadcom Corp
[    3.435466] PM: Starting manual resume from disk
[    3.435473] PM: Hibernation image partition 8:5 present
[    3.435477] PM: Looking for hibernation image.
[    3.497853] PM: Image not found (code -22)
[    3.497857] PM: Hibernation image not present or could not be loaded.
[    3.613549] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    5.665079] udevd[350]: starting version 175
[    6.292265] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    6.292275] ACPI: Power Button [PWRB]
[    6.292371] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    6.292375] ACPI: Sleep Button [SLPB]
[    6.292491] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[    6.292883] ACPI: Lid Switch [LID]
[    6.292965] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    6.292970] ACPI: Power Button [PWRF]
[    6.732751] wmi: Mapper loaded
[    6.852304] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[    6.852311] Disabling lock debugging due to kernel taint
[    7.044226] ACPI: Battery Slot [BAT0] (battery present)
[    7.100701] ACPI: AC Adapter [ACAD] (on-line)
[    7.109387] acpi device:09: registered as cooling_device2
[    7.109747] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:06/LNXVIDEO:01/input/input5
[    7.109763] ACPI: Video Device [DVGA] (multi-head: yes  rom: no  post: no)
[    7.148152] [fglrx] Maximum main memory to use for locked dma buffers: 3804 MBytes.
[    7.148611] [fglrx]   vendor: 1002 device: 9553 count: 1
[    7.149399] [fglrx] ioport: bar 1, base 0x5000, size: 0x100
[    7.149418] pci 0000:01:00.0: power state changed by ACPI to D0
[    7.149424] pci 0000:01:00.0: power state changed by ACPI to D0
[    7.149440] pci 0000:01:00.0: setting latency timer to 64
[    7.149770] [fglrx] Kernel PAT support is enabled
[    7.149804] [fglrx] module loaded - fglrx 8.97.2 [Nov 16 2012] with 1 minors
[    7.180810] ene_ir: chip is 0x3926 - kbver = 0x00, rev = 0xd2
[    7.180814] ene_ir: PLL freq = 1406
[    7.180817] ene_ir: KB3926D or higher detected
[    7.180831] ene_ir: Firmware regs: c0 01
[    7.180833] ene_ir: Hardware features:
[    7.180835] ene_ir: * Uses GPIO 40 for IR demodulated input
[    7.183155] IR NEC protocol handler initialized
[    7.195998] IR RC5(x) protocol handler initialized
[    7.222924] IR RC6 protocol handler initialized
[    7.226327] IR JVC protocol handler initialized
[    7.256083] Registered IR keymap rc-rc6-mce
[    7.256242] input: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0/input6
[    7.256293] rc0: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0
[    7.256343] ene_ir: driver has been successfully loaded
[    7.285968] ACPI: resource piix4_smbus [io  0x0b00-0x0b07] conflicts with ACPI region SMBI [io 0xb00-0xb0f]
[    7.285974] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.289307] powernow-k8: Found 1 AMD Athlon(tm) X2 Dual-Core QL-64 (2 cpu cores) (version 2.20.00)
[    7.289363] powernow-k8:    0 : pstate 0 (2100 MHz)
[    7.289365] powernow-k8:    1 : pstate 1 (1050 MHz)
[    7.321481] input: PC Speaker as /devices/platform/pcspkr/input/input7
[    7.371830] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[    7.372079] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[    7.384086] IR Sony protocol handler initialized
[    7.392672] input: MCE IR Keyboard/Mouse (ene_ir) as /devices/virtual/input/input8
[    7.396424] Linux media interface: v0.10
[    7.397313] IR MCE Keyboard/mouse protocol handler initialized
[    7.435834] Bluetooth: Core ver 2.16
[    7.435889] NET: Registered protocol family 31
[    7.435895] Bluetooth: HCI device and connection manager initialized
[    7.435903] Bluetooth: HCI socket layer initialized
[    7.435908] Bluetooth: L2CAP socket layer initialized
[    7.435921] Bluetooth: SCO socket layer initialized
[    7.453110] input: HP WMI hotkeys as /devices/virtual/input/input9
[    7.472105] Bluetooth: Generic Bluetooth USB driver ver 0.6
[    7.473712] usbcore: registered new interface driver btusb
[    7.478269] lirc_dev: IR Remote Control driver registered, major 250 
[    7.481529] rc rc0: lirc_dev: driver ir-lirc-codec (ene_ir) registered at minor = 0
[    7.481538] IR LIRC bridge handler initialized
[    7.534283] Linux video capture interface: v2.00
[    7.546197] uvcvideo: Found UVC 1.00 device HP Webcam (064e:c107)
[    7.562992] input: HP Webcam as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input10
[    7.563218] usbcore: registered new interface driver uvcvideo
[    7.563223] USB Video Class driver (1.1.1)
[    7.645288] snd_hda_intel 0000:00:14.2: setting latency timer to 64
[    7.710247] cfg80211: Calling CRDA to update world regulatory domain
[    7.795300] hp_accel: laptop model unknown, using default axes configuration
[    7.795995] lis3lv02d: 8 bits sensor found
[    7.813129] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input11
[    7.828520] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[    7.828787] input: HDA ATI SB Line-out as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
[    7.829511] snd_hda_intel 0000:01:00.1: irq 46 for MSI/MSI-X
[    7.829562] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[    7.836338] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input14
[    7.838258] Registered led device: hp::hddprotect
[    7.838302] hp_accel: driver loaded
[    8.101442] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[    8.101731] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
[    8.313614] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000/0x0
[    8.403419] ath9k 0000:08:00.0: setting latency timer to 64
[    8.453142] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input16
[    8.454501] ath: EEPROM regdomain: 0x6a
[    8.454510] ath: EEPROM indicates we should expect a direct regpair map
[    8.454521] ath: Country alpha2 being used: 00
[    8.454525] ath: Regpair used: 0x6a
[    8.509485] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    8.510806] Registered led device: ath9k-phy0
[    8.510825] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc900050c0000, irq=17
[   10.728805] Adding 6795260k swap on /dev/sda5.  Priority:-1 extents:1 across:6795260k 
[   10.773676] EXT4-fs (sda1): re-mounted. Opts: (null)
[   11.415491] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   11.567726] loop: module loaded
[   13.145717] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[   14.621614] RPC: Registered named UNIX socket transport module.
[   14.621623] RPC: Registered udp transport module.
[   14.621628] RPC: Registered tcp transport module.
[   14.621633] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   14.674450] FS-Cache: Loaded
[   14.762838] FS-Cache: Netfs 'nfs' registered for caching
[   14.782237] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   18.293825] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   18.293834] Bluetooth: BNEP filters: protocol multicast
[   18.602924] Bluetooth: RFCOMM TTY layer initialized
[   18.602938] Bluetooth: RFCOMM socket layer initialized
[   18.602943] Bluetooth: RFCOMM ver 1.11
[   20.195284] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   20.347700] r8169 0000:09:00.0: firmware: agent aborted loading rtl_nic/rtl8168d-1.fw (not found?)
[   20.347900] r8169 0000:09:00.0: eth0: unable to load firmware patch rtl_nic/rtl8168d-1.fw (-2)
[   20.355913] r8169 0000:09:00.0: eth0: link down
[   20.357602] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   21.911367] fglrx_pci 0000:01:00.0: irq 47 for MSI/MSI-X
[   21.912691] [fglrx] Firegl kernel thread PID: 2828
[   21.912903] [fglrx] Firegl kernel thread PID: 2829
[   21.913045] [fglrx] Firegl kernel thread PID: 2830
[   21.913266] [fglrx] IRQ 47 Enabled
[   22.236600] [fglrx] Gart USWC size:1240 M.
[   22.236606] [fglrx] Gart cacheable size:491 M.
[   22.236613] [fglrx] Reserved FB block: Shared offset:0, size:1000000 
[   22.236617] [fglrx] Reserved FB block: Unshared offset:fc1d000, size:3e3000 
[   22.236621] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000 
[   22.769272] wlan0: authenticate with 00:23:cd:c9:cb:7c (try 1)
[   22.771226] wlan0: authenticated
[   22.771689] wlan0: associate with 00:23:cd:c9:cb:7c (try 1)
[   22.773971] wlan0: RX AssocResp from 00:23:cd:c9:cb:7c (capab=0x421 status=0 aid=3)
[   22.773978] wlan0: associated
[   22.786023] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   33.712087] wlan0: no IPv6 routers present
[   66.550672] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[   493.713876] input: Microsoft Bluetooth Notebook Mouse 5000 as  /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.0/bluetooth/hci0/hci0:11/input17
[   493.714210] generic-bluetooth 0005:045E:0700.0001: input,hidraw0:  BLUETOOTH HID v1.00 Mouse [Microsoft Bluetooth Notebook Mouse 5000] on  00:24:7E:57:39:C1
[ 1429.053972] input: Microsoft Bluetooth Notebook  Mouse 5000 as  /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.0/bluetooth/hci0/hci0:11/input18
[  1429.055232] generic-bluetooth 0005:045E:0700.0002: input,hidraw0:  BLUETOOTH HID v1.00 Mouse [Microsoft Bluetooth Notebook Mouse 5000] on  00:24:7E:57:39:C1
[ 1672.763151] Bluetooth: Unexpected continuation frame (len 0)
[ 1672.799183] Bluetooth: Unexpected continuation frame (len 0)

Kod: Zaznacz cały

fglrxinfo
display: :0.0  screen: 0
OpenGL vendor string: Advanced Micro Devices, Inc.
OpenGL renderer string: ATI Mobility Radeon HD 4500/5100 Series
OpenGL version string: 3.3.11672 Compatibility Profile Context

[+] Debian Wheezy 7.2 Xfce4 - Radeon 4500 HD problem z grafik

[+] Debian Wheezy 7.2 Xfce4 - Radeon 4500 HD problem z grafiką