Po uruchomieniu system jest szybki, responsywny, ale po kilku dniach pracy (zwykłe przeglądanie stron, youtube, filmy itp) system zaczyna zwalniać - pojawiają się zacięcia przy przewijaniu stron, zmianie aktywnego okna, czegokolwiek co ma związek ze zmianą grafiki. Wygląda jakby coś się "zapychało" po kilku dniach, komputer nigdy nie jest przełączany w stan uśpienia/hibernacji, jedynie ekran jest wygaszany. Pomaga restart systemu, po kilku dniach znów system zaczyna zwalniać. Problem istnieje od kiedy posiadam tego laptopa - 2,5 roku, przechodził kilka reinstalacji systemu ale nic nie zmieniło tej przypadłości. Sterowniki do grafiki są te z repozytorium, próbowałem tez te ze strony Nvidia - bez zmian.
Jeszcze jedno zauważyłem, po kilku dniach wszelkie operacje graficzne (przewijanie stron, filmy, youtube) sprawiają więcej kłopotów obliczeniowych, jeśli tak to mogę nazwać, gdyż zaczyna pracować bardzo mocno wentylator na procesorze, podczas gdy na "świeżym" systemie zaraz po restarcie nie ma nic takiego.
Wykorzystanie pamięci nigdy nie przekracza połowy pojemności, partycja wymiany jest zazwyczaj nietknięta.
Nadmienię, że nie ma podobnych problemów pod Windows7 lub Windows8.
Konfiguracja laptopa: Intel Core i5 i5-520M 4GB 500GB 15,6'' GFGT330M
partycja główna "/" 32GB (15GB wolne),
partycja wymiany 1,5GB
jądro: 3.2.0-4-amd64
Kod: Zaznacz cały
lspci -k
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 12)
Subsystem: Samsung Electronics Co Ltd Device c06a
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 12)
Kernel driver in use: pcieport
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
Subsystem: Samsung Electronics Co Ltd Device c06a
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
Subsystem: Samsung Electronics Co Ltd Device c06a
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06)
Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 06)
Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 06)
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
Subsystem: Samsung Electronics Co Ltd Device c06a
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06)
Subsystem: Samsung Electronics Co Ltd Device c06a
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 06)
Subsystem: Samsung Electronics Co Ltd Device c06a
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
Subsystem: Samsung Electronics Co Ltd Device c06a
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06)
Subsystem: Samsung Electronics Co Ltd Device c06a
Kernel driver in use: intel ips
02:00.0 VGA compatible controller: NVIDIA Corporation GT216M [GeForce GT 330M] (rev a2)
Subsystem: Samsung Electronics Co Ltd Device c06a
Kernel driver in use: nvidia
02:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1)
Subsystem: Samsung Electronics Co Ltd Device c06a
Kernel driver in use: snd_hda_intel
03:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
Subsystem: Foxconn International, Inc. Device e025
Kernel driver in use: ath9k
07:00.0 Ethernet controller: Marvell Technology Group Ltd. Yukon Optima 88E8059 [PCIe Gigabit Ethernet Controller with AVB] (rev 11)
Subsystem: Samsung Electronics Co Ltd Device c06a
Kernel driver in use: sky2
3f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
Subsystem: Intel Corporation Device 8086
3f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
Subsystem: Intel Corporation Device 8086
3f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
Subsystem: Intel Corporation Device 8086
3f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
Subsystem: Intel Corporation Device 8086
3f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
Subsystem: Intel Corporation Device 8086
3f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
Subsystem: Intel Corporation Device 8086
/var/log/Xorg.0.log
Kod: Zaznacz cały
[ 34.450]
X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 34.450] X Protocol Version 11, Revision 0
[ 34.450] Build Operating System: Linux 3.2.0-4-amd64 x86_64 Debian
[ 34.450] Current Operating System: Linux R580 3.2.0-4-amd64 #1 SMP Debian 3.2.41-2 x86_64
[ 34.450] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=5dafb73e-e891-40ee-9a86-c49550423631 ro quiet
[ 34.450] Build Date: 17 April 2013 10:22:47AM
[ 34.450] xorg-server 2:1.12.4-6 (Julien Cristau <jcristau@debian.org>)
[ 34.450] Current version of pixman: 0.26.0
[ 34.450] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 34.450] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 34.450] (==) Log file: "/var/log/Xorg.0.log", Time: Fri May 24 16:13:59 2013
[ 34.510] (==) Using config file: "/etc/X11/xorg.conf"
[ 34.510] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 34.720] (==) ServerLayout "Layout0"
[ 34.720] (**) |-->Screen "Screen0" (0)
[ 34.720] (**) | |-->Monitor "Monitor0"
[ 34.720] (**) | |-->Device "Device0"
[ 34.720] (**) |-->Input Device "Keyboard0"
[ 34.720] (**) |-->Input Device "Mouse0"
[ 34.720] (==) Automatically adding devices
[ 34.720] (==) Automatically enabling devices
[ 34.846] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 34.846] Entry deleted from font path.
[ 34.869] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 34.869] Entry deleted from font path.
[ 34.869] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 34.869] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 34.869] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 34.869] (WW) Disabling Keyboard0
[ 34.869] (WW) Disabling Mouse0
[ 34.869] (II) Loader magic: 0x7f8526f9bae0
[ 34.869] (II) Module ABI versions:
[ 34.869] X.Org ANSI C Emulation: 0.4
[ 34.869] X.Org Video Driver: 12.1
[ 34.869] X.Org XInput driver : 16.0
[ 34.869] X.Org Server Extension : 6.0
[ 34.870] (--) PCI:*(0:2:0:0) 10de:0a29:144d:c06a rev 162, Mem @ 0xdc000000/16777216, 0xe0000000/268435456, 0xde000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
[ 34.870] (II) Open ACPI successful (/var/run/acpid.socket)
[ 34.870] (II) LoadModule: "extmod"
[ 34.913] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 34.956] (II) Module extmod: vendor="X.Org Foundation"
[ 34.956] compiled for 1.12.4, module version = 1.0.0
[ 34.956] Module class: X.Org Server Extension
[ 34.956] ABI class: X.Org Server Extension, version 6.0
[ 34.956] (II) Loading extension SELinux
[ 34.956] (II) Loading extension MIT-SCREEN-SAVER
[ 34.956] (II) Loading extension XFree86-VidModeExtension
[ 34.956] (II) Loading extension XFree86-DGA
[ 34.956] (II) Loading extension DPMS
[ 34.956] (II) Loading extension XVideo
[ 34.956] (II) Loading extension XVideo-MotionCompensation
[ 34.956] (II) Loading extension X-Resource
[ 34.956] (II) LoadModule: "dbe"
[ 34.957] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 34.994] (II) Module dbe: vendor="X.Org Foundation"
[ 34.994] compiled for 1.12.4, module version = 1.0.0
[ 34.994] Module class: X.Org Server Extension
[ 34.994] ABI class: X.Org Server Extension, version 6.0
[ 34.994] (II) Loading extension DOUBLE-BUFFER
[ 34.994] (II) LoadModule: "glx"
[ 34.994] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[ 36.507] (II) Module glx: vendor="NVIDIA Corporation"
[ 36.507] compiled for 4.0.2, module version = 1.0.0
[ 36.507] Module class: X.Org Server Extension
[ 36.507] (II) NVIDIA GLX Module 304.88 Wed Mar 27 14:46:57 PDT 2013
[ 36.507] (II) Loading extension GLX
[ 36.507] (II) LoadModule: "record"
[ 36.507] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 36.515] (II) Module record: vendor="X.Org Foundation"
[ 36.515] compiled for 1.12.4, module version = 1.13.0
[ 36.515] Module class: X.Org Server Extension
[ 36.515] ABI class: X.Org Server Extension, version 6.0
[ 36.515] (II) Loading extension RECORD
[ 36.515] (II) LoadModule: "dri"
[ 36.515] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 36.526] (II) Module dri: vendor="X.Org Foundation"
[ 36.526] compiled for 1.12.4, module version = 1.0.0
[ 36.526] ABI class: X.Org Server Extension, version 6.0
[ 36.526] (II) Loading extension XFree86-DRI
[ 36.526] (II) LoadModule: "dri2"
[ 36.526] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 36.527] (II) Module dri2: vendor="X.Org Foundation"
[ 36.527] compiled for 1.12.4, module version = 1.2.0
[ 36.527] ABI class: X.Org Server Extension, version 6.0
[ 36.527] (II) Loading extension DRI2
[ 36.527] (II) LoadModule: "nvidia"
[ 36.528] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 36.817] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 36.817] compiled for 4.0.2, module version = 1.0.0
[ 36.817] Module class: X.Org Video Driver
[ 36.860] (II) NVIDIA dlloader X Driver 304.88 Wed Mar 27 14:28:14 PDT 2013
[ 36.860] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 36.861] (++) using VT number 7
[ 36.892] (II) Loading sub module "fb"
[ 36.892] (II) LoadModule: "fb"
[ 36.893] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 36.920] (II) Module fb: vendor="X.Org Foundation"
[ 36.920] compiled for 1.12.4, module version = 1.0.0
[ 36.920] ABI class: X.Org ANSI C Emulation, version 0.4
[ 36.920] (II) Loading sub module "wfb"
[ 36.920] (II) LoadModule: "wfb"
[ 36.920] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 36.945] (II) Module wfb: vendor="X.Org Foundation"
[ 36.945] compiled for 1.12.4, module version = 1.0.0
[ 36.945] ABI class: X.Org ANSI C Emulation, version 0.4
[ 36.945] (II) Loading sub module "ramdac"
[ 36.945] (II) LoadModule: "ramdac"
[ 36.945] (II) Module "ramdac" already built-in
[ 37.005] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 37.005] (==) NVIDIA(0): RGB weight 888
[ 37.005] (==) NVIDIA(0): Default visual is TrueColor
[ 37.005] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 37.005] (**) NVIDIA(0): Enabling 2D acceleration
[ 38.152] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[ 38.152] (II) NVIDIA(GPU-0): Vision stereo.
[ 38.192] (II) NVIDIA(0): NVIDIA GPU GeForce GT 330M (GT216) at PCI:2:0:0 (GPU-0)
[ 38.193] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 38.193] (--) NVIDIA(0): VideoBIOS: 70.16.3f.00.ed
[ 38.193] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 38.193] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 38.320] (--) NVIDIA(0): Valid display device(s) on GeForce GT 330M at PCI:2:0:0
[ 38.320] (--) NVIDIA(0): CRT-0
[ 38.320] (--) NVIDIA(0): Seiko/Epson (DFP-0) (connected)
[ 38.320] (--) NVIDIA(0): DFP-1
[ 38.320] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 38.320] (--) NVIDIA(0): Seiko/Epson (DFP-0): 330.0 MHz maximum pixel clock
[ 38.320] (--) NVIDIA(0): Seiko/Epson (DFP-0): Internal Dual Link LVDS
[ 38.320] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[ 38.320] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 38.320] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 38.320] (**) NVIDIA(0): device Seiko/Epson (DFP-0) (Using EDID frequencies has
[ 38.320] (**) NVIDIA(0): been enabled on all display devices.)
[ 38.320] (==) NVIDIA(0):
[ 38.320] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 38.320] (==) NVIDIA(0): will be used as the requested mode.
[ 38.320] (==) NVIDIA(0):
[ 38.321] (II) NVIDIA(0): Validated MetaModes:
[ 38.321] (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
[ 38.321] (II) NVIDIA(0): Virtual screen size determined to be 1366 x 768
[ 39.418] (--) NVIDIA(0): DPI set to (102, 102); computed from "UseEdidDpi" X config
[ 39.418] (--) NVIDIA(0): option
[ 39.418] (--) Depth 24 pixmap format is 32 bpp
[ 39.418] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 39.427] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[ 39.786] (II) Loading extension NV-GLX
[ 39.849] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 39.849] (==) NVIDIA(0): Backing store disabled
[ 39.849] (==) NVIDIA(0): Silken mouse enabled
[ 39.850] (**) NVIDIA(0): DPMS enabled
[ 39.850] (II) Loading extension NV-CONTROL
[ 39.850] (II) Loading extension XINERAMA
[ 39.850] (II) Loading sub module "dri2"
[ 39.850] (II) LoadModule: "dri2"
[ 39.850] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 39.850] (II) Module dri2: vendor="X.Org Foundation"
[ 39.850] compiled for 1.12.4, module version = 1.2.0
[ 39.850] ABI class: X.Org Server Extension, version 6.0
[ 39.850] (II) NVIDIA(0): [DRI2] Setup complete
[ 39.850] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 39.850] (--) RandR disabled
[ 39.850] (II) Initializing built-in extension Generic Event Extension
[ 39.850] (II) Initializing built-in extension SHAPE
[ 39.850] (II) Initializing built-in extension MIT-SHM
[ 39.850] (II) Initializing built-in extension XInputExtension
[ 39.850] (II) Initializing built-in extension XTEST
[ 39.850] (II) Initializing built-in extension BIG-REQUESTS
[ 39.850] (II) Initializing built-in extension SYNC
[ 39.850] (II) Initializing built-in extension XKEYBOARD
[ 39.850] (II) Initializing built-in extension XC-MISC
[ 39.850] (II) Initializing built-in extension SECURITY
[ 39.850] (II) Initializing built-in extension XINERAMA
[ 39.850] (II) Initializing built-in extension XFIXES
[ 39.850] (II) Initializing built-in extension RENDER
[ 39.850] (II) Initializing built-in extension RANDR
[ 39.850] (II) Initializing built-in extension COMPOSITE
[ 39.850] (II) Initializing built-in extension DAMAGE
[ 39.850] (II) SELinux: Disabled on system
[ 39.851] (II) Initializing extension GLX
[ 40.376] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 40.376] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 40.376] (II) LoadModule: "evdev"
[ 40.377] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 40.389] (II) Module evdev: vendor="X.Org Foundation"
[ 40.389] compiled for 1.12.1, module version = 2.7.0
[ 40.389] Module class: X.Org XInput Driver
[ 40.389] ABI class: X.Org XInput driver, version 16.0
[ 40.389] (II) Using input driver 'evdev' for 'Power Button'
[ 40.389] (**) Power Button: always reports core events
[ 40.389] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 40.389] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 40.389] (--) evdev: Power Button: Found keys
[ 40.389] (II) evdev: Power Button: Configuring as keyboard
[ 40.389] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[ 40.389] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 40.389] (**) Option "xkb_rules" "evdev"
[ 40.389] (**) Option "xkb_model" "pc105"
[ 40.389] (**) Option "xkb_layout" "pl"
[ 40.431] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 40.431] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 40.431] (II) Using input driver 'evdev' for 'Video Bus'
[ 40.431] (**) Video Bus: always reports core events
[ 40.431] (**) evdev: Video Bus: Device: "/dev/input/event6"
[ 40.431] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 40.431] (--) evdev: Video Bus: Found keys
[ 40.431] (II) evdev: Video Bus: Configuring as keyboard
[ 40.431] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input6/event6"
[ 40.431] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 40.431] (**) Option "xkb_rules" "evdev"
[ 40.431] (**) Option "xkb_model" "pc105"
[ 40.431] (**) Option "xkb_layout" "pl"
[ 40.432] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 40.432] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 40.432] (II) Using input driver 'evdev' for 'Power Button'
[ 40.432] (**) Power Button: always reports core events
[ 40.432] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 40.432] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 40.432] (--) evdev: Power Button: Found keys
[ 40.432] (II) evdev: Power Button: Configuring as keyboard
[ 40.432] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3"
[ 40.432] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 40.432] (**) Option "xkb_rules" "evdev"
[ 40.432] (**) Option "xkb_model" "pc105"
[ 40.432] (**) Option "xkb_layout" "pl"
[ 40.433] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 40.433] (II) No input driver specified, ignoring this device.
[ 40.433] (II) This device may have been added with another device file.
[ 40.434] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 40.434] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 40.434] (II) Using input driver 'evdev' for 'Sleep Button'
[ 40.434] (**) Sleep Button: always reports core events
[ 40.434] (**) evdev: Sleep Button: Device: "/dev/input/event4"
[ 40.434] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 40.434] (--) evdev: Sleep Button: Found keys
[ 40.434] (II) evdev: Sleep Button: Configuring as keyboard
[ 40.434] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event4"
[ 40.434] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 40.434] (**) Option "xkb_rules" "evdev"
[ 40.434] (**) Option "xkb_model" "pc105"
[ 40.434] (**) Option "xkb_layout" "pl"
[ 40.435] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event11)
[ 40.435] (II) No input driver specified, ignoring this device.
[ 40.435] (II) This device may have been added with another device file.
[ 40.435] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event12)
[ 40.435] (II) No input driver specified, ignoring this device.
[ 40.435] (II) This device may have been added with another device file.
[ 40.436] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event13)
[ 40.436] (II) No input driver specified, ignoring this device.
[ 40.436] (II) This device may have been added with another device file.
[ 40.436] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event14)
[ 40.436] (II) No input driver specified, ignoring this device.
[ 40.436] (II) This device may have been added with another device file.
[ 40.437] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event1)
[ 40.437] (**) USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[ 40.437] (II) Using input driver 'evdev' for ' USB OPTICAL MOUSE'
[ 40.437] (**) USB OPTICAL MOUSE: always reports core events
[ 40.437] (**) evdev: USB OPTICAL MOUSE: Device: "/dev/input/event1"
[ 40.437] (--) evdev: USB OPTICAL MOUSE: Vendor 0x2188 Product 0xae1
[ 40.437] (--) evdev: USB OPTICAL MOUSE: Found 3 mouse buttons
[ 40.437] (--) evdev: USB OPTICAL MOUSE: Found scroll wheel(s)
[ 40.437] (--) evdev: USB OPTICAL MOUSE: Found relative axes
[ 40.437] (--) evdev: USB OPTICAL MOUSE: Found x and y relative axes
[ 40.437] (II) evdev: USB OPTICAL MOUSE: Configuring as mouse
[ 40.437] (II) evdev: USB OPTICAL MOUSE: Adding scrollwheel support
[ 40.437] (**) evdev: USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[ 40.437] (**) evdev: USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 40.437] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input1/event1"
[ 40.437] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE, id 10)
[ 40.437] (II) evdev: USB OPTICAL MOUSE: initialized for relative axes.
[ 40.437] (**) USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[ 40.437] (**) USB OPTICAL MOUSE: (accel) acceleration profile 0
[ 40.437] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[ 40.437] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[ 40.438] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
[ 40.438] (II) No input driver specified, ignoring this device.
[ 40.438] (II) This device may have been added with another device file.
[ 40.438] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event10)
[ 40.438] (II) No input driver specified, ignoring this device.
[ 40.438] (II) This device may have been added with another device file.
[ 40.439] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event9)
[ 40.439] (II) No input driver specified, ignoring this device.
[ 40.439] (II) This device may have been added with another device file.
[ 40.439] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 40.439] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 40.439] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 40.439] (**) AT Translated Set 2 keyboard: always reports core events
[ 40.439] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 40.439] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 40.439] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 40.439] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 40.439] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 40.439] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 40.439] (**) Option "xkb_rules" "evdev"
[ 40.439] (**) Option "xkb_model" "pc105"
[ 40.439] (**) Option "xkb_layout" "pl"
[ 40.440] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[ 40.440] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 40.440] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 40.440] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 40.440] (II) LoadModule: "synaptics"
[ 40.440] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 40.461] (II) Module synaptics: vendor="X.Org Foundation"
[ 40.461] compiled for 1.12.4, module version = 1.6.2
[ 40.461] Module class: X.Org XInput Driver
[ 40.461] ABI class: X.Org XInput driver, version 16.0
[ 40.461] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 40.461] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 40.461] (**) Option "Device" "/dev/input/event8"
[ 40.588] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 40.588] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5672
[ 40.588] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4910
[ 40.588] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 40.588] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 40.588] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 40.588] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 40.588] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 40.588] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 40.596] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event8"
[ 40.596] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[ 40.596] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 40.596] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 40.596] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
[ 40.596] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 40.596] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 40.596] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 40.596] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 40.596] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 40.597] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 40.597] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 40.597] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 40.597] (II) No input driver specified, ignoring this device.
[ 40.597] (II) This device may have been added with another device file.
[ 40.598] (II) config/udev: Adding input device ACPI Virtual Keyboard Device (/dev/input/event15)
[ 40.598] (**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
[ 40.598] (II) Using input driver 'evdev' for 'ACPI Virtual Keyboard Device'
[ 40.598] (**) ACPI Virtual Keyboard Device: always reports core events
[ 40.598] (**) evdev: ACPI Virtual Keyboard Device: Device: "/dev/input/event15"
[ 40.598] (--) evdev: ACPI Virtual Keyboard Device: Vendor 0 Product 0
[ 40.598] (--) evdev: ACPI Virtual Keyboard Device: Found keys
[ 40.598] (II) evdev: ACPI Virtual Keyboard Device: Configuring as keyboard
[ 40.598] (**) Option "config_info" "udev:/sys/devices/virtual/input/input15/event15"
[ 40.598] (II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type: KEYBOARD, id 13)
[ 40.598] (**) Option "xkb_rules" "evdev"
[ 40.598] (**) Option "xkb_model" "pc105"
[ 40.598] (**) Option "xkb_layout" "pl"
[ 40.619] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[ 40.619] (II) NVIDIA(GPU-0): Vision stereo.
[ 40.619] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 40.619] (**) NVIDIA(0): device Seiko/Epson (DFP-0) (Using EDID frequencies has
[ 40.619] (**) NVIDIA(0): been enabled on all display devices.)
[ 44.130] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[ 44.130] (II) NVIDIA(GPU-0): Vision stereo.
[ 44.130] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 44.130] (**) NVIDIA(0): device Seiko/Epson (DFP-0) (Using EDID frequencies has
[ 44.130] (**) NVIDIA(0): been enabled on all display devices.)
[ 110.191] (II) NVIDIA(GPU-0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[ 110.191] (II) NVIDIA(GPU-0): Vision stereo.
[ 110.191] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 110.191] (**) NVIDIA(0): device Seiko/Epson (DFP-0) (Using EDID frequencies has
[ 110.191] (**) NVIDIA(0): been enabled on all display devices.)
[131805.992] (II) config/udev: removing device USB OPTICAL MOUSE
[131806.053] (II) evdev: USB OPTICAL MOUSE: Close
[131806.116] (II) UnloadModule: "evdev"
[131808.887] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event1)
[131808.887] (**) USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[131808.888] (II) Using input driver 'evdev' for ' USB OPTICAL MOUSE'
[131808.888] (**) USB OPTICAL MOUSE: always reports core events
[131808.888] (**) evdev: USB OPTICAL MOUSE: Device: "/dev/input/event1"
[131808.888] (--) evdev: USB OPTICAL MOUSE: Vendor 0x2188 Product 0xae1
[131808.888] (--) evdev: USB OPTICAL MOUSE: Found 3 mouse buttons
[131808.888] (--) evdev: USB OPTICAL MOUSE: Found scroll wheel(s)
[131808.888] (--) evdev: USB OPTICAL MOUSE: Found relative axes
[131808.888] (--) evdev: USB OPTICAL MOUSE: Found x and y relative axes
[131808.888] (II) evdev: USB OPTICAL MOUSE: Configuring as mouse
[131808.888] (II) evdev: USB OPTICAL MOUSE: Adding scrollwheel support
[131808.888] (**) evdev: USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[131808.888] (**) evdev: USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[131808.888] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input16/event1"
[131808.888] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE, id 10)
[131808.888] (II) evdev: USB OPTICAL MOUSE: initialized for relative axes.
[131808.888] (**) USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[131808.888] (**) USB OPTICAL MOUSE: (accel) acceleration profile 0
[131808.888] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[131808.888] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[131808.952] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
[131808.952] (II) No input driver specified, ignoring this device.
[131808.953] (II) This device may have been added with another device file.
Kod: Zaznacz cały
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-15) ) #1 SMP Debian 3.2.41-2
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=5dafb73e-e891-40ee-9a86-c49550423631 ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c400 (usable)
[ 0.000000] BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000d727c000 (usable)
[ 0.000000] BIOS-e820: 00000000d727c000 - 00000000d7282000 (reserved)
[ 0.000000] BIOS-e820: 00000000d7282000 - 00000000d73ec000 (usable)
[ 0.000000] BIOS-e820: 00000000d73ec000 - 00000000d740f000 (reserved)
[ 0.000000] BIOS-e820: 00000000d740f000 - 00000000d746f000 (usable)
[ 0.000000] BIOS-e820: 00000000d746f000 - 00000000d7470000 (reserved)
[ 0.000000] BIOS-e820: 00000000d7470000 - 00000000d74f1000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000d74f1000 - 00000000d770f000 (reserved)
[ 0.000000] BIOS-e820: 00000000d770f000 - 00000000d7716000 (usable)
[ 0.000000] BIOS-e820: 00000000d7716000 - 00000000d771f000 (reserved)
[ 0.000000] BIOS-e820: 00000000d771f000 - 00000000d7780000 (usable)
[ 0.000000] BIOS-e820: 00000000d7780000 - 00000000d779f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000d779f000 - 00000000d77e2000 (usable)
[ 0.000000] BIOS-e820: 00000000d77e2000 - 00000000d77ff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000d77ff000 - 00000000d7800000 (usable)
[ 0.000000] BIOS-e820: 00000000d7800000 - 00000000d8000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f7fff000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fcb04000 - 00000000fcb05000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. R580/R590 /R580/R590 , BIOS 11JB.M044.20100622.hkk 06/22/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 disabled
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FF0000000 write-back
[ 0.000000] 4 base 0D0000000 mask FF8000000 write-back
[ 0.000000] 5 base 100000000 mask FE0000000 write-back
[ 0.000000] 6 base 120000000 mask FF8000000 write-back
[ 0.000000] 7 base 120000000 mask FF8000000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d8000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xd7800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000f6690] f6690
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000d7800000
[ 0.000000] 0000000000 - 00d7800000 page 2M
[ 0.000000] kernel direct mapping tables up to d7800000 @ 1fffb000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000120000000
[ 0.000000] 0100000000 - 0120000000 page 2M
[ 0.000000] kernel direct mapping tables up to 120000000 @ d77e0000-d77e2000
[ 0.000000] RAMDISK: 36ac0000 - 37558000
[ 0.000000] ACPI: RSDP 00000000000f65d0 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 00000000d77f45ea 0005C (v01 SECCSD LH43STAR 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000d77e4000 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 00000000d77e5000 0A584 (v02 Intel CALPELLA 06040000 INTL 20060912)
[ 0.000000] ACPI: FACS 00000000d779bfc0 00040
[ 0.000000] ACPI: HPET 00000000d77fed6a 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 00000000d77feda2 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: APIC 00000000d77fedde 00084 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000d77fee62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 00000000d77fee8a 00176 (v01 SECCSD LH43STAR 06040000 LTP 00000000)
[ 0.000000] ACPI: SSDT 00000000d77e3000 009F1 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000120000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000120000000
[ 0.000000] NODE_DATA [000000011fffb000 - 000000011fffffff]
[ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011b800000-ffff88011effffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00120000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[9] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009c
[ 0.000000] 0: 0x00000100 -> 0x000d727c
[ 0.000000] 0: 0x000d7282 -> 0x000d73ec
[ 0.000000] 0: 0x000d740f -> 0x000d746f
[ 0.000000] 0: 0x000d770f -> 0x000d7716
[ 0.000000] 0: 0x000d771f -> 0x000d7780
[ 0.000000] 0: 0x000d779f -> 0x000d77e2
[ 0.000000] 0: 0x000d77ff -> 0x000d7800
[ 0.000000] 0: 0x00100000 -> 0x00120000
[ 0.000000] On node 0 totalpages: 1012862
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3919 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 863530 pages, LIFO batch:31
[ 0.000000] Normal zone: 1792 pages used for memmap
[ 0.000000] Normal zone: 129280 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000d727c000 - 00000000d7282000
[ 0.000000] PM: Registered nosave memory: 00000000d73ec000 - 00000000d740f000
[ 0.000000] PM: Registered nosave memory: 00000000d746f000 - 00000000d7470000
[ 0.000000] PM: Registered nosave memory: 00000000d7470000 - 00000000d74f1000
[ 0.000000] PM: Registered nosave memory: 00000000d74f1000 - 00000000d770f000
[ 0.000000] PM: Registered nosave memory: 00000000d7716000 - 00000000d771f000
[ 0.000000] PM: Registered nosave memory: 00000000d7780000 - 00000000d779f000
[ 0.000000] PM: Registered nosave memory: 00000000d77e2000 - 00000000d77ff000
[ 0.000000] PM: Registered nosave memory: 00000000d7800000 - 00000000d8000000
[ 0.000000] PM: Registered nosave memory: 00000000d8000000 - 00000000f7fff000
[ 0.000000] PM: Registered nosave memory: 00000000f7fff000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fcb04000
[ 0.000000] PM: Registered nosave memory: 00000000fcb04000 - 00000000fcb05000
[ 0.000000] PM: Registered nosave memory: 00000000fcb05000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d8000000 (gap: d8000000:1ffff000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011fc00000 s82944 r8192 d23552 u524288
[ 0.000000] pcpu-alloc: s82944 r8192 d23552 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 996729
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=5dafb73e-e891-40ee-9a86-c49550423631 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3908224k/4718592k available (3420k kernel code, 667144k absent, 143224k reserved, 3318k data, 576k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 2393.971 MHz processor.
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.94 BogoMIPS (lpj=9575884)
[ 0.000006] pid_max: default: 32768 minimum: 301
[ 0.000040] Security Framework initialized
[ 0.000044] AppArmor: AppArmor disabled by boot time parameter
[ 0.000257] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001201] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001599] Mount-cache hash table entries: 256
[ 0.001705] Initializing cgroup subsys cpuacct
[ 0.001709] Initializing cgroup subsys memory
[ 0.001719] Initializing cgroup subsys devices
[ 0.001722] Initializing cgroup subsys freezer
[ 0.001724] Initializing cgroup subsys net_cls
[ 0.001726] Initializing cgroup subsys blkio
[ 0.001732] Initializing cgroup subsys perf_event
[ 0.001756] CPU: Physical Processor ID: 0
[ 0.001757] CPU: Processor Core ID: 0
[ 0.001762] mce: CPU supports 9 MCE banks
[ 0.001771] CPU0: Thermal monitoring handled by SMI
[ 0.001778] using mwait in idle threads.
[ 0.002134] ACPI: Core revision 20110623
[ 0.016544] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056159] CPU0: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz stepping 02
[ 0.160022] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
[ 0.160029] ... version: 3
[ 0.160030] ... bit width: 48
[ 0.160031] ... generic registers: 4
[ 0.160032] ... value mask: 0000ffffffffffff
[ 0.160034] ... max period: 000000007fffffff
[ 0.160035] ... fixed-purpose events: 3
[ 0.160036] ... event mask: 000000070000000f
[ 0.160201] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.160307] Booting Node 0, Processors #1
[ 0.160310] smpboot cpu 1: start_ip = 97000
[ 0.247889] CPU1: Thermal monitoring handled by SMI
[ 0.268002] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.268117] #2
[ 0.268119] smpboot cpu 2: start_ip = 97000
[ 0.355700] CPU2: Thermal monitoring handled by SMI
[ 0.375774] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.375899] #3 Ok.
[ 0.375901] smpboot cpu 3: start_ip = 97000
[ 0.463510] CPU3: Thermal monitoring handled by SMI
[ 0.483588] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.483625] Brought up 4 CPUs
[ 0.483627] Total of 4 processors activated (19151.63 BogoMIPS).
[ 0.486017] devtmpfs: initialized
[ 0.489510] PM: Registering ACPI NVS region at d7470000 (528384 bytes)
[ 0.489530] PM: Registering ACPI NVS region at d7780000 (126976 bytes)
[ 0.489669] print_constraints: dummy:
[ 0.489725] NET: Registered protocol family 16
[ 0.489815] ACPI: bus type pci registered
[ 0.489898] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf8000000-0x107ffffff] (base 0xf8000000)
[ 0.489901] PCI: MMCONFIG at [mem 0xf8000000-0x107ffffff] reserved in E820
[ 0.489904] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) (size reduced!)
[ 0.500841] PCI: Using configuration type 1 for base access
[ 0.501526] bio: create slab <bio-0> at 0
[ 0.501616] ACPI: Added _OSI(Module Device)
[ 0.501618] ACPI: Added _OSI(Processor Device)
[ 0.501620] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.501622] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.502989] ACPI: EC: Look up EC in DSDT
[ 0.509427] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.511190] ACPI: SSDT 00000000d7719918 003E2 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.511522] ACPI: Dynamic OEM Table Load:
[ 0.511525] ACPI: SSDT (null) 003E2 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.511669] ACPI: SSDT 00000000d7717698 005EB (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.511977] ACPI: Dynamic OEM Table Load:
[ 0.511980] ACPI: SSDT (null) 005EB (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.535706] ACPI: SSDT 00000000d7718a98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.536092] ACPI: Dynamic OEM Table Load:
[ 0.536094] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.547518] ACPI: SSDT 00000000d7716d98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.547860] ACPI: Dynamic OEM Table Load:
[ 0.547862] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.560883] ACPI: Interpreter enabled
[ 0.560889] ACPI: (supports S0 S3 S4 S5)
[ 0.560911] ACPI: Using IOAPIC for interrupt routing
[ 0.561323] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.561474] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.567371] ACPI: Power Resource [FN00] (off)
[ 0.567464] ACPI: Power Resource [FN01] (off)
[ 0.567885] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.568178] ACPI: No dock devices found.
[ 0.568180] HEST: Table not found.
[ 0.568184] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.568608] \_SB_.PCI0:_OSC invalid UUID
[ 0.568610] _OSC request data:1 8 1f
[ 0.568613] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.569302] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.569304] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.569307] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.569309] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.569311] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.569313] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.569315] pci_root PNP0A08:00: host bridge window [mem 0xd8000000-0xfeafffff]
[ 0.569327] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
[ 0.569343] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 0.569364] pci 0000:00:01.0: [8086:0045] type 1 class 0x000604
[ 0.569394] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.569449] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
[ 0.569474] pci 0000:00:1a.0: reg 10: [mem 0xfcb06000-0xfcb063ff]
[ 0.569581] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.569615] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
[ 0.569636] pci 0000:00:1b.0: reg 10: [mem 0xfcb00000-0xfcb03fff 64bit]
[ 0.569731] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.569763] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[ 0.569861] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.569894] pci 0000:00:1c.2: [8086:3b46] type 1 class 0x000604
[ 0.569992] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.570024] pci 0000:00:1c.3: [8086:3b48] type 1 class 0x000604
[ 0.570123] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.570164] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[ 0.570188] pci 0000:00:1d.0: reg 10: [mem 0xfcb06400-0xfcb067ff]
[ 0.570295] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.570322] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.570408] pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601
[ 0.570537] pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106
[ 0.570564] pci 0000:00:1f.2: reg 10: [io 0x1830-0x1837]
[ 0.570575] pci 0000:00:1f.2: reg 14: [io 0x1824-0x1827]
[ 0.570586] pci 0000:00:1f.2: reg 18: [io 0x1828-0x182f]
[ 0.570596] pci 0000:00:1f.2: reg 1c: [io 0x1820-0x1823]
[ 0.570607] pci 0000:00:1f.2: reg 20: [io 0x1800-0x181f]
[ 0.570618] pci 0000:00:1f.2: reg 24: [mem 0xfcb05000-0xfcb057ff]
[ 0.570683] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.570708] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[ 0.570729] pci 0000:00:1f.3: reg 10: [mem 0xfcb06800-0xfcb068ff 64bit]
[ 0.570758] pci 0000:00:1f.3: reg 20: [io 0x1840-0x185f]
[ 0.570808] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
[ 0.570835] pci 0000:00:1f.6: reg 10: [mem 0xfcb04000-0xfcb04fff 64bit]
[ 0.570964] pci 0000:02:00.0: [10de:0a29] type 0 class 0x000300
[ 0.570973] pci 0000:02:00.0: reg 10: [mem 0xdc000000-0xdcffffff]
[ 0.570982] pci 0000:02:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.570991] pci 0000:02:00.0: reg 1c: [mem 0xde000000-0xdfffffff 64bit pref]
[ 0.570998] pci 0000:02:00.0: reg 24: [io 0x2000-0x207f]
[ 0.571004] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0007ffff pref]
[ 0.571052] pci 0000:02:00.1: [10de:0be2] type 0 class 0x000403
[ 0.571061] pci 0000:02:00.1: reg 10: [mem 0xddefc000-0xddefffff]
[ 0.571139] pci 0000:00:01.0: PCI bridge to [bus 02-02]
[ 0.571142] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.571144] pci 0000:00:01.0: bridge window [mem 0xdc000000-0xddefffff]
[ 0.571147] pci 0000:00:01.0: bridge window [mem 0xde000000-0xefffffff 64bit pref]
[ 0.571221] pci 0000:03:00.0: [168c:002b] type 0 class 0x000280
[ 0.571243] pci 0000:03:00.0: reg 10: [mem 0xfc700000-0xfc70ffff 64bit]
[ 0.571346] pci 0000:03:00.0: supports D1
[ 0.571347] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.579423] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[ 0.579431] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.579438] pci 0000:00:1c.0: bridge window [mem 0xfc700000-0xfc7fffff]
[ 0.579449] pci 0000:00:1c.0: bridge window [mem 0xfc000000-0xfc1fffff 64bit pref]
[ 0.579516] pci 0000:00:1c.2: PCI bridge to [bus 05-06]
[ 0.579520] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.579525] pci 0000:00:1c.2: bridge window [mem 0xfc600000-0xfc6fffff]
[ 0.579532] pci 0000:00:1c.2: bridge window [mem 0xfc200000-0xfc3fffff 64bit pref]
[ 0.579813] pci 0000:07:00.0: [11ab:4381] type 0 class 0x000200
[ 0.580031] pci 0000:07:00.0: reg 10: [mem 0xfc800000-0xfc803fff 64bit]
[ 0.580139] pci 0000:07:00.0: reg 18: [io 0x5000-0x50ff]
[ 0.580567] pci 0000:07:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.581107] pci 0000:07:00.0: supports D1 D2
[ 0.581109] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.587548] pci 0000:00:1c.3: PCI bridge to [bus 07-08]
[ 0.587553] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
[ 0.587558] pci 0000:00:1c.3: bridge window [mem 0xfc800000-0xfc8fffff]
[ 0.587565] pci 0000:00:1c.3: bridge window [mem 0xfc400000-0xfc5fffff 64bit pref]
[ 0.587637] pci 0000:00:1e.0: PCI bridge to [bus 09-09] (subtractive decode)
[ 0.587650] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.587652] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.587654] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.587657] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.587659] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.587661] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.587664] pci 0000:00:1e.0: bridge window [mem 0xd8000000-0xfeafffff] (subtractive decode)
[ 0.587692] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.587936] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.588006] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.588158] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.588223] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.588284] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.588411] \_SB_.PCI0:_OSC invalid UUID
[ 0.588412] _OSC request data:1 1f 1f
[ 0.588416] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.588453] \_SB_.PCI0:_OSC invalid UUID
[ 0.588454] _OSC request data:1 0 1d
[ 0.588458] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[ 0.588459] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.593533] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 3f])
[ 0.593606] pci 0000:3f:00.0: [8086:2c62] type 0 class 0x000600
[ 0.593625] pci 0000:3f:00.1: [8086:2d01] type 0 class 0x000600
[ 0.593643] pci 0000:3f:02.0: [8086:2d10] type 0 class 0x000600
[ 0.593659] pci 0000:3f:02.1: [8086:2d11] type 0 class 0x000600
[ 0.593675] pci 0000:3f:02.2: [8086:2d12] type 0 class 0x000600
[ 0.593691] pci 0000:3f:02.3: [8086:2d13] type 0 class 0x000600
[ 0.593720] pci0000:3f: Requesting ACPI _OSC control (0x1d)
[ 0.593722] pci0000:3f: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.593724] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.593963] ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
[ 0.594009] ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
[ 0.594053] ACPI: PCI Interrupt Link [LNKC] (IRQs 5) *10
[ 0.594098] ACPI: PCI Interrupt Link [LNKD] (IRQs *5)
[ 0.594143] ACPI: PCI Interrupt Link [LNKE] (IRQs 11) *0, disabled.
[ 0.594188] ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled.
[ 0.594232] ACPI: PCI Interrupt Link [LNKG] (IRQs 5) *7
[ 0.594277] ACPI: PCI Interrupt Link [LNKH] (IRQs 5) *11
[ 0.594388] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.594393] vgaarb: loaded
[ 0.594394] vgaarb: bridge control possible 0000:02:00.0
[ 0.594434] PCI: Using ACPI for IRQ routing
[ 0.597124] PCI: pci_cache_line_size set to 64 bytes
[ 0.597314] reserve RAM buffer: 000000000009c400 - 000000000009ffff
[ 0.597316] reserve RAM buffer: 00000000d727c000 - 00000000d7ffffff
[ 0.597319] reserve RAM buffer: 00000000d73ec000 - 00000000d7ffffff
[ 0.597321] reserve RAM buffer: 00000000d746f000 - 00000000d7ffffff
[ 0.597324] reserve RAM buffer: 00000000d7716000 - 00000000d7ffffff
[ 0.597326] reserve RAM buffer: 00000000d7780000 - 00000000d7ffffff
[ 0.597328] reserve RAM buffer: 00000000d77e2000 - 00000000d7ffffff
[ 0.597330] reserve RAM buffer: 00000000d7800000 - 00000000d7ffffff
[ 0.597443] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.597448] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.599466] Switching to clocksource hpet
[ 0.601057] pnp: PnP ACPI init
[ 0.601071] ACPI: bus type pnp registered
[ 0.601437] pnp 00:00: [bus 00-3e]
[ 0.601439] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.601442] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.601444] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.601446] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.601448] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.601450] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.601452] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.601454] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.601456] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.601458] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.601460] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.601461] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.601463] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.601465] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.601467] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.601469] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.601471] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.601473] pnp 00:00: [mem 0xd8000000-0xfeafffff window]
[ 0.601475] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.601536] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.601834] pnp 00:01: [io 0x0000-0x001f]
[ 0.601836] pnp 00:01: [io 0x0081-0x0091]
[ 0.601838] pnp 00:01: [io 0x0093-0x009f]
[ 0.601840] pnp 00:01: [io 0x00c0-0x00df]
[ 0.601842] pnp 00:01: [dma 4]
[ 0.601879] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.601888] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 0.601914] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.602000] pnp 00:03: [irq 0 disabled]
[ 0.602010] pnp 00:03: [irq 8]
[ 0.602012] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.602040] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.602051] pnp 00:04: [io 0x00f0]
[ 0.602056] pnp 00:04: [irq 13]
[ 0.602081] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.602092] pnp 00:05: [io 0x002e-0x002f]
[ 0.602094] pnp 00:05: [io 0x004e-0x004f]
[ 0.602096] pnp 00:05: [io 0x0061]
[ 0.602097] pnp 00:05: [io 0x0063]
[ 0.602099] pnp 00:05: [io 0x0065]
[ 0.602100] pnp 00:05: [io 0x0067]
[ 0.602102] pnp 00:05: [io 0x0070]
[ 0.602103] pnp 00:05: [io 0x0080]
[ 0.602105] pnp 00:05: [io 0x0092]
[ 0.602106] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.602108] pnp 00:05: [io 0x0680-0x069f]
[ 0.602110] pnp 00:05: [io 0x0500-0x050f]
[ 0.602111] pnp 00:05: [io 0x0600-0x0603]
[ 0.602113] pnp 00:05: [io 0xffff]
[ 0.602114] pnp 00:05: [io 0x0400-0x047f]
[ 0.602116] pnp 00:05: [io 0x1180-0x11ff]
[ 0.602118] pnp 00:05: [io 0x164e-0x164f]
[ 0.602119] pnp 00:05: [io 0xfe00]
[ 0.602171] system 00:05: [io 0x0680-0x069f] has been reserved
[ 0.602174] system 00:05: [io 0x0500-0x050f] has been reserved
[ 0.602176] system 00:05: [io 0x0600-0x0603] has been reserved
[ 0.602179] system 00:05: [io 0xffff] has been reserved
[ 0.602181] system 00:05: [io 0x0400-0x047f] has been reserved
[ 0.602183] system 00:05: [io 0x1180-0x11ff] has been reserved
[ 0.602186] system 00:05: [io 0x164e-0x164f] has been reserved
[ 0.602189] system 00:05: [io 0xfe00] has been reserved
[ 0.602191] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.602226] pnp 00:06: [io 0x06a0-0x06af]
[ 0.602228] pnp 00:06: [io 0x06b0-0x06ff]
[ 0.602269] system 00:06: [io 0x06a0-0x06af] has been reserved
[ 0.602271] system 00:06: [io 0x06b0-0x06ff] has been reserved
[ 0.602274] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.602304] pnp 00:07: [io 0x0070-0x0077]
[ 0.602333] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.602343] pnp 00:08: [io 0x0060]
[ 0.602345] pnp 00:08: [io 0x0064]
[ 0.602350] pnp 00:08: [irq 1]
[ 0.602376] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.602387] pnp 00:09: [irq 12]
[ 0.602414] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.602749] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 0.602751] pnp 00:0a: [mem 0xfed10000-0xfed13fff]
[ 0.602753] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[ 0.602755] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[ 0.602757] pnp 00:0a: [mem 0xf8000000-0xfbffffff]
[ 0.602759] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.602761] pnp 00:0a: [mem 0xf7fff000-0xf7ffffff]
[ 0.602763] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[ 0.602765] pnp 00:0a: [mem 0xfed90000-0xfed8ffff disabled]
[ 0.602766] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
[ 0.602768] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
[ 0.602770] pnp 00:0a: [mem 0xff000000-0xffffffff]
[ 0.602772] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[ 0.602838] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.602841] system 00:0a: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.602843] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.602846] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.602849] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.602851] system 00:0a: [mem 0xf7fff000-0xf7ffffff] has been reserved
[ 0.602854] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.602856] system 00:0a: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.602859] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.602861] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[ 0.602864] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.602867] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.603625] pnp 00:0b: [bus 3f]
[ 0.603677] pnp 00:0b: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.603689] pnp: PnP ACPI: found 12 devices
[ 0.603690] ACPI: ACPI bus type pnp unregistered
[ 0.610774] PCI: max bus depth: 1 pci_try_num: 2
[ 0.610819] pci 0000:02:00.0: BAR 6: assigned [mem 0xdd000000-0xdd07ffff pref]
[ 0.610822] pci 0000:00:01.0: PCI bridge to [bus 02-02]
[ 0.610824] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.610827] pci 0000:00:01.0: bridge window [mem 0xdc000000-0xddefffff]
[ 0.610830] pci 0000:00:01.0: bridge window [mem 0xde000000-0xefffffff 64bit pref]
[ 0.610834] pci 0000:00:1c.0: PCI bridge to [bus 03-04]
[ 0.610837] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.610843] pci 0000:00:1c.0: bridge window [mem 0xfc700000-0xfc7fffff]
[ 0.610848] pci 0000:00:1c.0: bridge window [mem 0xfc000000-0xfc1fffff 64bit pref]
[ 0.610855] pci 0000:00:1c.2: PCI bridge to [bus 05-06]
[ 0.610858] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.610864] pci 0000:00:1c.2: bridge window [mem 0xfc600000-0xfc6fffff]
[ 0.610869] pci 0000:00:1c.2: bridge window [mem 0xfc200000-0xfc3fffff 64bit pref]
[ 0.610877] pci 0000:07:00.0: BAR 6: assigned [mem 0xfc400000-0xfc41ffff pref]
[ 0.610879] pci 0000:00:1c.3: PCI bridge to [bus 07-08]
[ 0.610883] pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
[ 0.610889] pci 0000:00:1c.3: bridge window [mem 0xfc800000-0xfc8fffff]
[ 0.610894] pci 0000:00:1c.3: bridge window [mem 0xfc400000-0xfc5fffff 64bit pref]
[ 0.610901] pci 0000:00:1e.0: PCI bridge to [bus 09-09]
[ 0.610926] pci 0000:00:01.0: setting latency timer to 64
[ 0.610937] pci 0000:00:1c.0: setting latency timer to 64
[ 0.610949] pci 0000:00:1c.2: setting latency timer to 64
[ 0.610963] pci 0000:00:1c.3: setting latency timer to 64
[ 0.610971] pci 0000:00:1e.0: setting latency timer to 64
[ 0.610975] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.610976] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.610978] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.610980] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.610982] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.610984] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.610986] pci_bus 0000:00: resource 10 [mem 0xd8000000-0xfeafffff]
[ 0.610988] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.610990] pci_bus 0000:02: resource 1 [mem 0xdc000000-0xddefffff]
[ 0.610992] pci_bus 0000:02: resource 2 [mem 0xde000000-0xefffffff 64bit pref]
[ 0.610994] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.610995] pci_bus 0000:03: resource 1 [mem 0xfc700000-0xfc7fffff]
[ 0.610997] pci_bus 0000:03: resource 2 [mem 0xfc000000-0xfc1fffff 64bit pref]
[ 0.610999] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
[ 0.611001] pci_bus 0000:05: resource 1 [mem 0xfc600000-0xfc6fffff]
[ 0.611003] pci_bus 0000:05: resource 2 [mem 0xfc200000-0xfc3fffff 64bit pref]
[ 0.611005] pci_bus 0000:07: resource 0 [io 0x5000-0x5fff]
[ 0.611007] pci_bus 0000:07: resource 1 [mem 0xfc800000-0xfc8fffff]
[ 0.611009] pci_bus 0000:07: resource 2 [mem 0xfc400000-0xfc5fffff 64bit pref]
[ 0.611011] pci_bus 0000:09: resource 4 [io 0x0000-0x0cf7]
[ 0.611013] pci_bus 0000:09: resource 5 [io 0x0d00-0xffff]
[ 0.611015] pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.611017] pci_bus 0000:09: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.611018] pci_bus 0000:09: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.611020] pci_bus 0000:09: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.611022] pci_bus 0000:09: resource 10 [mem 0xd8000000-0xfeafffff]
[ 0.611105] NET: Registered protocol family 2
[ 0.611222] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.612014] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.614344] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.614627] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.614629] TCP reno registered
[ 0.614636] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.614668] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.614813] NET: Registered protocol family 1
[ 0.614952] pci 0000:02:00.0: Boot video device
[ 0.615055] PCI: CLS 64 bytes, default 64
[ 0.615100] Unpacking initramfs...
[ 0.824805] Freeing initrd memory: 10848k freed
[ 0.827091] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.827096] Placing 64MB software IO TLB between ffff8800d327c000 - ffff8800d727c000
[ 0.827097] software IO TLB at phys 0xd327c000 - 0xd727c000
[ 0.827115] Simple Boot Flag at 0x37 set to 0x1
[ 0.827617] audit: initializing netlink socket (disabled)
[ 0.827628] type=2000 audit(1369412004.672:1): initialized
[ 0.840507] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.841378] VFS: Disk quotas dquot_6.5.2
[ 0.841408] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.841484] msgmni has been set to 7654
[ 0.841651] alg: No test for stdrng (krng)
[ 0.841685] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.841688] io scheduler noop registered
[ 0.841690] io scheduler deadline registered
[ 0.841711] io scheduler cfq registered (default)
[ 0.841799] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.841825] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.842042] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.842059] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.842061] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.842312] acpiphp: Slot [1] registered
[ 0.842430] intel_idle: MWAIT substates: 0x1120
[ 0.842432] intel_idle: v0.4 model 0x25
[ 0.842433] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.842478] ERST: Table is not found!
[ 0.842480] GHES: HEST is not enabled!
[ 0.842538] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.015115] Linux agpgart interface v0.103
[ 1.015291] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.018914] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.018920] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.019040] mousedev: PS/2 mouse device common for all mice
[ 1.019089] rtc_cmos 00:07: RTC can wake from S4
[ 1.019199] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.019231] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.019298] cpuidle: using governor ladder
[ 1.019379] cpuidle: using governor menu
[ 1.019547] TCP cubic registered
[ 1.019729] NET: Registered protocol family 10
[ 1.020251] Mobile IPv6
[ 1.020254] NET: Registered protocol family 17
[ 1.020257] Registering the dns_resolver key type
[ 1.020983] PM: Hibernation image not present or could not be loaded.
[ 1.021002] registered taskstats version 1
[ 1.022049] rtc_cmos 00:07: setting system clock to 2013-05-24 16:13:25 UTC (1369412005)
[ 1.022119] Initializing network drop monitor service
[ 1.023354] Freeing unused kernel memory: 576k freed
[ 1.023453] Write protecting the kernel read-only data: 6144k
[ 1.025776] Freeing unused kernel memory: 660k freed
[ 1.028243] Freeing unused kernel memory: 680k freed
[ 1.047426] udevd[56]: starting version 175
[ 1.051899] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.073534] sky2: driver version 1.30
[ 1.073765] sky2 0000:07:00.0: setting latency timer to 64
[ 1.073901] sky2 0000:07:00.0: Yukon-2 Optima chip revision 1
[ 1.074659] sky2 0000:07:00.0: irq 41 for MSI/MSI-X
[ 1.079891] SCSI subsystem initialized
[ 1.090194] usbcore: registered new interface driver usbfs
[ 1.090227] usbcore: registered new interface driver hub
[ 1.092123] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.092127] ACPI: Thermal Zone [TZ00] (69 C)
[ 1.094127] sky2 0000:07:00.0: eth0: addr 00:24:54:5e:a2:4b
[ 1.095424] usbcore: registered new device driver usb
[ 1.095510] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.095513] ACPI: Thermal Zone [TZ01] (69 C)
[ 1.095867] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.095926] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.095931] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.095948] ACPI: Fan [FAN0] (off)
[ 1.095960] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.096000] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.096003] ACPI: Fan [FAN1] (off)
[ 1.099988] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.104395] libata version 3.00 loaded.
[ 1.106939] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xfcb06000
[ 1.122608] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.122645] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.122648] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.122651] usb usb1: Product: EHCI Host Controller
[ 1.122653] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 1.122655] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.123051] hub 1-0:1.0: USB hub found
[ 1.123058] hub 1-0:1.0: 3 ports detected
[ 1.123256] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.123262] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.123273] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.123310] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.127296] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.127322] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfcb06400
[ 1.142549] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.142607] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.142612] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.142617] usb usb2: Product: EHCI Host Controller
[ 1.142620] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 1.142624] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.142927] hub 2-0:1.0: USB hub found
[ 1.142936] hub 2-0:1.0: 3 ports detected
[ 1.143076] ahci 0000:00:1f.2: version 3.0
[ 1.143203] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[ 1.143254] ahci: SSS flag set, parallel bus scan disabled
[ 1.143307] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x13 impl SATA mode
[ 1.143314] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[ 1.143323] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.159617] scsi0 : ahci
[ 1.159819] scsi1 : ahci
[ 1.159953] scsi2 : ahci
[ 1.160084] scsi3 : ahci
[ 1.160221] scsi4 : ahci
[ 1.160321] ata1: SATA max UDMA/133 abar m2048@0xfcb05000 port 0xfcb05100 irq 42
[ 1.160327] ata2: SATA max UDMA/133 abar m2048@0xfcb05000 port 0xfcb05180 irq 42
[ 1.160330] ata3: DUMMY
[ 1.160332] ata4: DUMMY
[ 1.160336] ata5: SATA max UDMA/133 abar m2048@0xfcb05000 port 0xfcb05300 irq 42
[ 1.434103] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.478041] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.480161] ata1.00: ATA-8: WDC WD5000BEVT-35ZAT0, 01.01A01, max UDMA/133
[ 1.480166] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.482444] ata1.00: configured for UDMA/133
[ 1.482780] scsi 0:0:0:0: Direct-Access ATA WDC WD5000BEVT-3 01.0 PQ: 0 ANSI: 5
[ 1.566368] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.566373] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.566789] hub 1-1:1.0: USB hub found
[ 1.566975] hub 1-1:1.0: 6 ports detected
[ 1.677686] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 1.801481] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.803941] ata2.00: ATAPI: SlimtypeDVD A DS8A4S, JS21, max UDMA/100
[ 1.805347] ata2.00: configured for UDMA/100
[ 1.809393] scsi 1:0:0:0: CD-ROM Slimtype DVD A DS8A4S JS21 PQ: 0 ANSI: 5
[ 1.809784] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 1.809791] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.810216] hub 2-1:1.0: USB hub found
[ 1.810425] hub 2-1:1.0: 8 ports detected
[ 1.825435] Refined TSC clocksource calibration: 2393.984 MHz.
[ 1.825442] Switching to clocksource tsc
[ 1.881430] usb 1-1.1: new high-speed USB device number 3 using ehci_hcd
[ 1.994253] usb 1-1.1: New USB device found, idVendor=0ac8, idProduct=c342
[ 1.994260] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.994264] usb 1-1.1: Product: WebCam SCB-1900N
[ 1.994268] usb 1-1.1: Manufacturer: Namuga Co.,Ltd.
[ 2.065116] usb 1-1.2: new low-speed USB device number 4 using ehci_hcd
[ 2.128866] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.135624] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.135693] sd 0:0:0:0: [sda] Write Protect is off
[ 2.135695] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.135716] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.143373] sr0: scsi3-mmc drive: 8x/8x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.143377] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.143578] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.160978] usb 1-1.2: New USB device found, idVendor=2188, idProduct=0ae1
[ 2.160984] usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.160989] usb 1-1.2: Product: USB OPTICAL MOUSE
[ 2.199370] sda: sda1 < sda5 sda6 > sda2 sda3
[ 2.201254] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.203155] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.203249] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.204574] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input1
[ 2.204697] generic-usb 0003:2188:0AE1.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1a.0-1.2/input0
[ 2.204714] usbcore: registered new interface driver usbhid
[ 2.204715] usbhid: USB HID core driver
[ 2.232849] usb 1-1.3: new full-speed USB device number 5 using ehci_hcd
[ 2.329270] usb 1-1.3: New USB device found, idVendor=0a5c, idProduct=219b
[ 2.329277] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.329282] usb 1-1.3: Product: Broadcom Bluetooth 2.1 Device
[ 2.329286] usb 1-1.3: Manufacturer: Broadcom Corp
[ 2.329289] usb 1-1.3: SerialNumber: 506313D13016
[ 3.018826] microcode: CPU0 sig=0x20652, pf=0x10, revision=0x9
[ 3.021835] platform microcode: firmware: agent loaded intel-ucode/06-25-02 into memory
[ 3.022172] microcode: CPU0 updated to revision 0xd, date = 2011-09-01
[ 3.022231] microcode: CPU1 sig=0x20652, pf=0x10, revision=0x9
[ 3.025784] platform microcode: firmware: agent loaded intel-ucode/06-25-02 into memory
[ 3.026334] microcode: CPU1 updated to revision 0xd, date = 2011-09-01
[ 3.026350] microcode: CPU2 sig=0x20652, pf=0x10, revision=0x9
[ 3.029937] platform microcode: firmware: agent loaded intel-ucode/06-25-02 into memory
[ 3.030203] microcode: CPU2 updated to revision 0xd, date = 2011-09-01
[ 3.030260] microcode: CPU3 sig=0x20652, pf=0x10, revision=0x9
[ 3.033662] platform microcode: firmware: agent loaded intel-ucode/06-25-02 into memory
[ 3.034212] microcode: CPU3 updated to revision 0xd, date = 2011-09-01
[ 3.034383] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 3.040922] device-mapper: uevent: version 1.0.3
[ 3.041043] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 3.143294] EXT4-fs (sda5): INFO: recovery required on readonly filesystem
[ 3.143300] EXT4-fs (sda5): write access will be enabled during recovery
[ 4.257994] EXT4-fs (sda5): orphan cleanup on readonly fs
[ 4.258003] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 655613
[ 4.258089] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 655024
[ 4.258101] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 655705
[ 4.258133] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 655703
[ 4.258177] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 531435
[ 4.258186] EXT4-fs (sda5): 5 orphan inodes deleted
[ 4.258188] EXT4-fs (sda5): recovery complete
[ 4.850449] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 7.591062] udevd[415]: starting version 175
[ 8.636702] iTCO_vendor_support: vendor-support=0
[ 8.692930] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 8.693633] ACPI: Lid Switch [LID0]
[ 8.693771] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 8.693788] ACPI: Power Button [PWRB]
[ 8.693878] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[ 8.693885] ACPI: Sleep Button [SLPB]
[ 8.693976] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 8.693982] ACPI: Power Button [PWRF]
[ 8.695606] ACPI: Requesting acpi_cpufreq
[ 8.732728] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 8.732872] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 8.733838] acpi device:02: registered as cooling_device6
[ 8.735237] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input6
[ 8.735244] ACPI: Video Device [ATIM] (multi-head: yes rom: no post: no)
[ 8.735254] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 8.736977] ACPI: Battery Slot [BAT1] (battery present)
[ 9.005263] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 9.005397] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
[ 9.005509] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 9.055109] ACPI: AC Adapter [ADP1] (on-line)
[ 9.237192] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[ 9.237259] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
[ 9.237484] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 9.238885] samsung_laptop: Backlight controlled by ACPI video driver
[ 9.366622] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 9.625959] cfg80211: Calling CRDA to update world regulatory domain
[ 9.967207] ath9k 0000:03:00.0: setting latency timer to 64
[ 10.018034] ath: EEPROM regdomain: 0x65
[ 10.018036] ath: EEPROM indicates we should expect a direct regpair map
[ 10.018040] ath: Country alpha2 being used: 00
[ 10.018042] ath: Regpair used: 0x65
[ 10.083069] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
[ 10.124507] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 10.153197] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 10.251909] ACPI: resource 0000:00:1f.3 [io 0x1840-0x185f] conflicts with ACPI region SMBI [io 0x1840-0x184f]
[ 10.251913] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.480605] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 10.481129] Registered led device: ath9k-phy0
[ 10.481138] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90005100000, irq=16
[ 10.537349] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 10.537381] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 10.894103] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 10.894198] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 10.894933] hda_intel: Disabling MSI
[ 10.894984] snd_hda_intel 0000:02:00.1: setting latency timer to 64
[ 11.529384] Bluetooth: Core ver 2.16
[ 11.529407] NET: Registered protocol family 31
[ 11.529409] Bluetooth: HCI device and connection manager initialized
[ 11.529412] Bluetooth: HCI socket layer initialized
[ 11.529414] Bluetooth: L2CAP socket layer initialized
[ 11.529419] Bluetooth: SCO socket layer initialized
[ 11.554570] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 11.554843] usbcore: registered new interface driver btusb
[ 11.844073] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 11.876017] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 11.907946] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 11.939908] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 11.955990] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:02:00.1/sound/card1/input11
[ 11.956223] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:02:00.1/sound/card1/input12
[ 11.956445] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:02:00.1/sound/card1/input13
[ 11.956648] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:02:00.1/sound/card1/input14
[ 12.554252] nvidia: module license 'NVIDIA' taints kernel.
[ 12.554257] Disabling lock debugging due to kernel taint
[ 12.649685] nvidia 0000:02:00.0: setting latency timer to 64
[ 12.649691] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none :o wns=io+mem
[ 12.649803] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.88 Wed Mar 27 14:26:46 PDT 2013
[ 12.863659] cfg80211: World regulatory domain updated:
[ 12.863664] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.863670] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.863674] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.863679] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.863683] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.863687] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.568351] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 16.167295] Adding 1453052k swap on /dev/sda6. Priority:-1 extents:1 across:1453052k
[ 16.188880] EXT4-fs (sda5): re-mounted. Opts: (null)
[ 16.726539] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 16.897171] loop: module loaded
[ 17.889946] fuse init (API version 7.17)
[ 19.753026] RPC: Registered named UNIX socket transport module.
[ 19.753033] RPC: Registered udp transport module.
[ 19.753037] RPC: Registered tcp transport module.
[ 19.753041] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 19.811131] FS-Cache: Loaded
[ 19.880267] FS-Cache: Netfs 'nfs' registered for caching
[ 19.895034] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 21.114027] vboxdrv: Found 4 processor cores.
[ 21.114358] vboxdrv: fAsync=0 offMin=0x22b offMax=0x2247
[ 21.114409] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 21.114411] vboxdrv: Successfully loaded version 4.1.18_Debian (interface 0x00190000).
[ 21.456199] vboxpci: IOMMU not found (not registered)
[ 21.993603] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input15
[ 27.132348] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 27.132353] Bluetooth: BNEP filters: protocol multicast
[ 27.454037] Bluetooth: RFCOMM TTY layer initialized
[ 27.454047] Bluetooth: RFCOMM socket layer initialized
[ 27.454050] Bluetooth: RFCOMM ver 1.11
[ 28.740535] lp: driver loaded but no devices found
[ 28.956858] ppdev: user-space parallel port driver
[ 30.471425] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 30.487898] sky2 0000:07:00.0: eth0: enabling interface
[ 30.488831] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 31.775288] Ebtables v2.0 registered
[ 32.107420] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 32.341804] ip6_tables: (C) 2000-2006 Netfilter Core Team
syslog
Kod: Zaznacz cały
May 26 05:33:15 R580 rsyslogd: [origin software="rsyslogd" swVersion="5.8.11" x-pid="3193" x-info="http://www.rsyslog.com"] rsyslogd was HUPed
May 26 05:36:01 R580 anacron[5696]: Job `cron.daily' terminated
May 26 05:36:01 R580 anacron[5696]: Normal exit (1 job run)
May 26 05:36:51 R580 rsyslogd: [origin software="rsyslogd" swVersion="7.3.15" x-pid="21223" x-info="http://www.rsyslog.com"] start
May 26 06:17:01 R580 /USR/SBIN/CRON[29386]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
May 26 06:25:01 R580 /USR/SBIN/CRON[5089]: (root) CMD (test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily ))
May 26 06:47:01 R580 /USR/SBIN/CRON[27435]: (root) CMD (test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.weekly ))
May 26 07:17:01 R580 /USR/SBIN/CRON[25523]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
May 26 07:30:01 R580 /USR/SBIN/CRON[6337]: (root) CMD (test -x /etc/init.d/anacron && /usr/sbin/invoke-rc.d anacron start >/dev/null)
May 26 07:30:01 R580 anacron[6369]: Anacron 2.3 started on 2013-05-26
May 26 07:30:01 R580 anacron[6369]: Normal exit (0 jobs run)
May 26 08:17:01 R580 /USR/SBIN/CRON[21644]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
May 26 09:17:01 R580 /USR/SBIN/CRON[17756]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
May 26 09:19:19 R580 dhclient: DHCPREQUEST on wlan0 to 192.168.0.1 port 67
May 26 09:19:20 R580 dhclient: DHCPACK from 192.168.0.1
May 26 09:19:20 R580 dhclient: bound to 192.168.0.4 -- renewal in 39059 seconds.
May 26 09:19:20 R580 NetworkManager[3975]: <info> (wlan0): DHCPv4 state changed renew -> renew
May 26 09:19:20 R580 NetworkManager[3975]: <info> address 192.168.0.4
May 26 09:19:20 R580 NetworkManager[3975]: <info> prefix 24 (255.255.255.0)
May 26 09:19:20 R580 NetworkManager[3975]: <info> gateway 192.168.0.1
May 26 09:19:20 R580 NetworkManager[3975]: <info> nameserver '194.168.4.100'
May 26 09:19:20 R580 NetworkManager[3975]: <info> nameserver '194.168.8.100'
May 26 09:19:20 R580 dbus[3830]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
May 26 09:19:20 R580 dbus[3830]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
May 26 10:17:01 R580 /USR/SBIN/CRON[13848]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
May 26 11:17:01 R580 /USR/SBIN/CRON[9939]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
May 26 11:18:56 R580 laptop-mode: Laptop mode
May 26 11:18:56 R580 laptop-mode: enabled, not active [unchanged]
May 26 11:18:56 R580 laptop-mode: Laptop mode
May 26 11:18:56 R580 laptop-mode: enabled, not active [unchanged]
May 26 12:17:01 R580 /USR/SBIN/CRON[6074]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
May 26 12:25:11 R580 dbus[3830]: [system] Activating service name='org.freedesktop.PackageKit' (using servicehelper)
May 26 12:25:11 R580 dbus[3830]: [system] Successfully activated service 'org.freedesktop.PackageKit'
May 26 13:02:41 R580 laptop-mode: Laptop mode
May 26 13:02:41 R580 laptop-mode: enabled, active
May 26 13:02:41 R580 kernel: [161078.730652] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,user_xattr,barrier=1,data=ordered,commit=600
May 26 13:02:41 R580 laptop-mode: Laptop mode
May 26 13:02:41 R580 laptop-mode: enabled, active [unchanged]
May 26 13:02:49 R580 laptop-mode: Laptop mode
May 26 13:02:49 R580 laptop-mode: enabled, active [unchanged]
May 26 13:02:49 R580 laptop-mode: Laptop mode
May 26 13:02:49 R580 laptop-mode: enabled, active [unchanged]
May 26 13:03:09 R580 laptop-mode: Laptop mode
May 26 13:03:09 R580 laptop-mode: enabled, active [unchanged]
May 26 13:03:09 R580 laptop-mode: Laptop mode
May 26 13:03:09 R580 laptop-mode: enabled, active [unchanged]
May 26 13:03:24 R580 laptop-mode: Laptop mode
May 26 13:03:24 R580 laptop-mode: enabled, active [unchanged]
May 26 13:03:24 R580 laptop-mode: Laptop mode
May 26 13:03:24 R580 laptop-mode: enabled, active [unchanged]
May 26 13:03:31 R580 laptop-mode: Laptop mode
May 26 13:03:31 R580 laptop-mode: enabled, not active
May 26 13:03:31 R580 anacron[21916]: Anacron 2.3 started on 2013-05-26
May 26 13:03:31 R580 anacron[21916]: Normal exit (0 jobs run)
May 26 13:03:31 R580 kernel: [161128.029800] NMI watchdog enabled, takes one hw-pmu counter.
May 26 13:03:31 R580 kernel: [161128.030291] NMI watchdog enabled, takes one hw-pmu counter.
May 26 13:03:31 R580 kernel: [161128.030323] NMI watchdog enabled, takes one hw-pmu counter.
May 26 13:03:31 R580 kernel: [161128.030351] NMI watchdog enabled, takes one hw-pmu counter.
May 26 13:03:31 R580 kernel: [161128.319558] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,user_xattr,barrier=1,data=ordered,commit=0
May 26 13:03:31 R580 laptop-mode: Laptop mode
May 26 13:03:31 R580 laptop-mode: enabled, not active [unchanged]
May 26 13:03:33 R580 laptop-mode: Laptop mode
May 26 13:03:33 R580 laptop-mode: enabled, not active [unchanged]
May 26 13:03:33 R580 laptop-mode: Laptop mode
May 26 13:03:33 R580 laptop-mode: enabled, not active [unchanged]
May 26 13:03:59 R580 laptop-mode: Laptop mode
May 26 13:03:59 R580 laptop-mode: enabled, not active [unchanged]
May 26 13:03:59 R580 laptop-mode: Laptop mode
May 26 13:03:59 R580 laptop-mode: enabled, not active [unchanged]
May 26 13:05:13 R580 laptop-mode: Laptop mode
May 26 13:05:13 R580 laptop-mode: enabled, not active [unchanged]
May 26 13:05:13 R580 laptop-mode: Laptop mode
May 26 13:05:13 R580 laptop-mode: enabled, not active [unchanged]
May 26 13:06:53 R580 laptop-mode: Laptop mode
May 26 13:06:53 R580 laptop-mode: enabled, not active [unchanged]
May 26 13:06:53 R580 laptop-mode: Laptop mode
May 26 13:06:53 R580 laptop-mode: enabled, not active [unchanged]
May 26 13:08:52 R580 laptop-mode: Laptop mode
May 26 13:08:52 R580 laptop-mode: enabled, not active [unchanged]
May 26 13:08:52 R580 laptop-mode: Laptop mode
May 26 13:08:52 R580 laptop-mode: enabled, not active [unchanged]
May 26 13:12:10 R580 laptop-mode: Laptop mode
May 26 13:12:10 R580 laptop-mode: enabled, not active [unchanged]
May 26 13:12:10 R580 laptop-mode: Laptop mode
May 26 13:12:10 R580 laptop-mode: enabled, not active [unchanged]
May 26 13:12:11 R580 laptop-mode: Laptop mode
May 26 13:12:11 R580 laptop-mode: enabled, not active [unchanged]
May 26 13:12:11 R580 laptop-mode: Laptop mode
May 26 13:12:11 R580 laptop-mode: enabled, not active [unchanged]
May 26 13:17:01 R580 /USR/SBIN/CRON[3914]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
May 26 14:17:01 R580 /USR/SBIN/CRON[32080]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
May 26 15:17:01 R580 /USR/SBIN/CRON[28174]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
May 26 16:17:01 R580 /USR/SBIN/CRON[24279]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
May 26 17:17:01 R580 /USR/SBIN/CRON[20344]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
May 26 18:17:01 R580 /USR/SBIN/CRON[16427]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
May 26 19:17:01 R580 /USR/SBIN/CRON[12465]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
May 26 19:20:51 R580 laptop-mode: Laptop mode
May 26 19:20:51 R580 laptop-mode: enabled, not active [unchanged]
May 26 19:20:51 R580 laptop-mode: Laptop mode
May 26 19:20:51 R580 laptop-mode: enabled, not active [unchanged]
May 26 20:10:19 R580 dhclient: DHCPREQUEST on wlan0 to 192.168.0.1 port 67
May 26 20:10:20 R580 dhclient: DHCPACK from 192.168.0.1
May 26 20:10:20 R580 NetworkManager[3975]: <info> (wlan0): DHCPv4 state changed renew -> renew
May 26 20:10:20 R580 NetworkManager[3975]: <info> address 192.168.0.4
May 26 20:10:20 R580 NetworkManager[3975]: <info> prefix 24 (255.255.255.0)
May 26 20:10:20 R580 NetworkManager[3975]: <info> gateway 192.168.0.1
May 26 20:10:20 R580 NetworkManager[3975]: <info> nameserver '194.168.4.100'
May 26 20:10:20 R580 NetworkManager[3975]: <info> nameserver '194.168.8.100'
May 26 20:10:20 R580 dhclient: bound to 192.168.0.4 -- renewal in 33577 seconds.
May 26 20:10:20 R580 dbus[3830]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
May 26 20:10:20 R580 dbus[3830]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
May 26 20:17:01 R580 /USR/SBIN/CRON[8202]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
May 26 21:17:01 R580 /USR/SBIN/CRON[3672]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
