Witam.
Dziś po instalacji sterowników do mojej karty graficznej Geforce 8400 GS napotkałem na mały problem.
Przy logowaniu się do systemu ekran przygasa na 2-3 sekundy po czym wszystko wraca do normy. Tak samo dzieje się z niektórymi aplikacjami uruchamiam np. ustawienia systemu ekran gaśnie na 2-3 sekundy i znów wszystko działa prawidłowo.
Mój system to Debian Wheezy amd64 ze środowiskiem graficznym Gnome 3.
Karta grafiki GeForce 8400 GS
Zainstalowany sterownik to: NVIDIA-Linux-x86_64-310.32
Nie wiem jakie jeszcze informacje podać na ten temat.
Podczas instalacji sterowników dodałem wpis do gruba "nomodeset" w celu pozbycia się sterownika nouveau.
Jeżeli ktoś zna odpowiedz na ten problem to z góry dziękuję.
Pozdrawiam Dawid
Nvidia Geforce 8400 GS - gasn
-
holiday0110
- Posty: 9
- Rejestracja: 07 stycznia 2013, 22:10
- Lokalizacja: Bielsko Biała
Proszę dostarczyć informacji według wzoru: http://debian.linux.pl/threads/12771-Za ... #post81406
Do tego wynik polecenia:
Do tego wynik polecenia:
Kod: Zaznacz cały
dmesg
-
holiday0110
- Posty: 9
- Rejestracja: 07 stycznia 2013, 22:10
- Lokalizacja: Bielsko Biała
Witam.
Ekran robi się czarny na chwilę, po czym wszystko wraca do normy. Wina pewnie leży gdzieś po stronie sterowników lub karty graficznej. Przed instalacją sterowników takiego problemu nie miałem.
log Xorg
dmesg
Ekran robi się czarny na chwilę, po czym wszystko wraca do normy. Wina pewnie leży gdzieś po stronie sterowników lub karty graficznej. Przed instalacją sterowników takiego problemu nie miałem.
Kod: Zaznacz cały
uname -a
Linux easy 3.2.0-4-amd64 #1 SMP Debian 3.2.35-2 x86_64 GNU/Linux
Kod: Zaznacz cały
[ 13.616] X.Org X Server 1.12.4
Release Date: 2012-08-27
[ 13.616] X Protocol Version 11, Revision 0
[ 13.616] Build Operating System: Linux 3.2.0-4.drm-amd64 x86_64 Debian
[ 13.616] Current Operating System: Linux easy 3.2.0-4-amd64 #1 SMP Debian 3.2.35-2 x86_64
[ 13.616] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=98561119-097b-4b9f-bc6c-eaa69fa0356f ro quiet nomodeset
[ 13.616] Build Date: 29 November 2012 07:18:16PM
[ 13.616] xorg-server 2:1.12.4-4 (Julien Cristau <jcristau@debian.org>)
[ 13.616] Current version of pixman: 0.26.0
[ 13.616] Before reporting problems, check [URL]http://wiki.x.org[/URL]
to make sure that you have the latest version.
[ 13.616] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 13.616] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 30 22:40:13 2013
[ 13.639] (==) Using config file: "/etc/X11/xorg.conf"
[ 13.639] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 13.730] (==) ServerLayout "Layout0"
[ 13.730] (**) |-->Screen "Screen0" (0)
[ 13.730] (**) | |-->Monitor "Monitor0"
[ 13.730] (**) | |-->Device "Device0"
[ 13.730] (**) |-->Input Device "Keyboard0"
[ 13.730] (**) |-->Input Device "Mouse0"
[ 13.730] (==) Automatically adding devices
[ 13.730] (==) Automatically enabling devices
[ 13.780] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 13.780] Entry deleted from font path.
[ 13.801] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 13.801] Entry deleted from font path.
[ 13.801] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 13.801] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 13.801] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 13.801] (WW) Disabling Keyboard0
[ 13.801] (WW) Disabling Mouse0
[ 13.801] (II) Loader magic: 0x7f57c8734ae0
[ 13.801] (II) Module ABI versions:
[ 13.802] X.Org ANSI C Emulation: 0.4
[ 13.802] X.Org Video Driver: 12.1
[ 13.802] X.Org XInput driver : 16.0
[ 13.802] X.Org Server Extension : 6.0
[ 13.803] (--) PCI:*(0:1:0:0) 10de:0422:10b0:1401 rev 161, Mem @ 0xfd000000/16777216, 0xe0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000dc00/128, BIOS @ 0x????????/131072
[ 13.803] (II) Open ACPI successful (/var/run/acpid.socket)
[ 13.803] (II) LoadModule: "extmod"
[ 13.827] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 13.837] (II) Module extmod: vendor="X.Org Foundation"
[ 13.838] compiled for 1.12.4, module version = 1.0.0
[ 13.838] Module class: X.Org Server Extension
[ 13.838] ABI class: X.Org Server Extension, version 6.0
[ 13.838] (II) Loading extension SELinux
[ 13.838] (II) Loading extension MIT-SCREEN-SAVER
[ 13.838] (II) Loading extension XFree86-VidModeExtension
[ 13.838] (II) Loading extension XFree86-DGA
[ 13.838] (II) Loading extension DPMS
[ 13.838] (II) Loading extension XVideo
[ 13.838] (II) Loading extension XVideo-MotionCompensation
[ 13.838] (II) Loading extension X-Resource
[ 13.838] (II) LoadModule: "dbe"
[ 13.838] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 13.839] (II) Module dbe: vendor="X.Org Foundation"
[ 13.839] compiled for 1.12.4, module version = 1.0.0
[ 13.839] Module class: X.Org Server Extension
[ 13.839] ABI class: X.Org Server Extension, version 6.0
[ 13.839] (II) Loading extension DOUBLE-BUFFER
[ 13.839] (II) LoadModule: "glx"
[ 13.839] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 14.538] (II) Module glx: vendor="NVIDIA Corporation"
[ 14.538] compiled for 4.0.2, module version = 1.0.0
[ 14.538] Module class: X.Org Server Extension
[ 14.538] (II) NVIDIA GLX Module 310.32 Mon Jan 14 15:02:04 PST 2013
[ 14.538] (II) Loading extension GLX
[ 14.538] (II) LoadModule: "record"
[ 14.538] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 14.551] (II) Module record: vendor="X.Org Foundation"
[ 14.551] compiled for 1.12.4, module version = 1.13.0
[ 14.551] Module class: X.Org Server Extension
[ 14.551] ABI class: X.Org Server Extension, version 6.0
[ 14.551] (II) Loading extension RECORD
[ 14.551] (II) LoadModule: "dri"
[ 14.551] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 14.559] (II) Module dri: vendor="X.Org Foundation"
[ 14.559] compiled for 1.12.4, module version = 1.0.0
[ 14.559] ABI class: X.Org Server Extension, version 6.0
[ 14.559] (II) Loading extension XFree86-DRI
[ 14.559] (II) LoadModule: "dri2"
[ 14.560] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 14.560] (II) Module dri2: vendor="X.Org Foundation"
[ 14.560] compiled for 1.12.4, module version = 1.2.0
[ 14.560] ABI class: X.Org Server Extension, version 6.0
[ 14.560] (II) Loading extension DRI2
[ 14.560] (II) LoadModule: "nvidia"
[ 14.561] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 14.661] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 14.661] compiled for 4.0.2, module version = 1.0.0
[ 14.661] Module class: X.Org Video Driver
[ 14.668] (II) NVIDIA dlloader X Driver 310.32 Mon Jan 14 14:42:46 PST 2013
[ 14.668] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 14.669] (++) using VT number 7
[ 14.678] (II) Loading sub module "wfb"
[ 14.678] (II) LoadModule: "wfb"
[ 14.678] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 14.692] (II) Module wfb: vendor="X.Org Foundation"
[ 14.692] compiled for 1.12.4, module version = 1.0.0
[ 14.692] ABI class: X.Org ANSI C Emulation, version 0.4
[ 14.692] (II) Loading sub module "ramdac"
[ 14.692] (II) LoadModule: "ramdac"
[ 14.692] (II) Module "ramdac" already built-in
[ 14.695] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 14.695] (==) NVIDIA(0): RGB weight 888
[ 14.695] (==) NVIDIA(0): Default visual is TrueColor
[ 14.695] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 14.697] (**) NVIDIA(0): Enabling 2D acceleration
[ 15.857] (II) NVIDIA(GPU-0): Display (LG Electronics L1919S (CRT-1)) does not support
[ 15.857] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
[ 15.858] (II) NVIDIA(0): NVIDIA GPU GeForce 8400 GS (G86) at PCI:1:0:0 (GPU-0)
[ 15.858] (--) NVIDIA(0): Memory: 524288 kBytes
[ 15.858] (--) NVIDIA(0): VideoBIOS: 60.86.65.00.00
[ 15.858] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 15.861] (--) NVIDIA(0): Valid display device(s) on GeForce 8400 GS at PCI:1:0:0
[ 15.861] (--) NVIDIA(0): CRT-0
[ 15.861] (--) NVIDIA(0): LG Electronics L1919S (CRT-1) (connected)
[ 15.861] (--) NVIDIA(0): DFP-0
[ 15.861] (--) NVIDIA(0): DFP-1
[ 15.861] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 15.861] (--) NVIDIA(0): LG Electronics L1919S (CRT-1): 400.0 MHz maximum pixel clock
[ 15.861] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[ 15.861] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 15.861] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[ 15.861] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 15.861] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 15.861] (**) NVIDIA(0): device LG Electronics L1919S (CRT-1) (Using EDID
[ 15.862] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 15.864] (==) NVIDIA(0):
[ 15.864] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 15.864] (==) NVIDIA(0): will be used as the requested mode.
[ 15.864] (==) NVIDIA(0):
[ 15.865] (II) NVIDIA(0): Validated MetaModes:
[ 15.865] (II) NVIDIA(0): "CRT-1:nvidia-auto-select"
[ 15.865] (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
[ 15.884] (--) NVIDIA(0): DPI set to (85, 86); computed from "UseEdidDpi" X config
[ 15.884] (--) NVIDIA(0): option
[ 15.884] (--) Depth 24 pixmap format is 32 bpp
[ 15.885] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 15.900] (II) NVIDIA(0): Setting mode "CRT-1:nvidia-auto-select"
[ 15.950] (II) Loading extension NV-GLX
[ 16.008] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 16.008] (==) NVIDIA(0): Backing store disabled
[ 16.008] (==) NVIDIA(0): Silken mouse enabled
[ 16.009] (**) NVIDIA(0): DPMS enabled
[ 16.078] (II) Loading extension NV-CONTROL
[ 16.091] (II) Loading extension XINERAMA
[ 16.091] (II) Loading sub module "dri2"
[ 16.091] (II) LoadModule: "dri2"
[ 16.091] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 16.091] (II) Module dri2: vendor="X.Org Foundation"
[ 16.091] compiled for 1.12.4, module version = 1.2.0
[ 16.091] ABI class: X.Org Server Extension, version 6.0
[ 16.091] (II) NVIDIA(0): [DRI2] Setup complete
[ 16.092] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 16.092] (--) RandR disabled
[ 16.092] (II) Initializing built-in extension Generic Event Extension
[ 16.092] (II) Initializing built-in extension SHAPE
[ 16.092] (II) Initializing built-in extension MIT-SHM
[ 16.092] (II) Initializing built-in extension XInputExtension
[ 16.092] (II) Initializing built-in extension XTEST
[ 16.092] (II) Initializing built-in extension BIG-REQUESTS
[ 16.092] (II) Initializing built-in extension SYNC
[ 16.092] (II) Initializing built-in extension XKEYBOARD
[ 16.092] (II) Initializing built-in extension XC-MISC
[ 16.092] (II) Initializing built-in extension SECURITY
[ 16.092] (II) Initializing built-in extension XINERAMA
[ 16.092] (II) Initializing built-in extension XFIXES
[ 16.092] (II) Initializing built-in extension RENDER
[ 16.092] (II) Initializing built-in extension RANDR
[ 16.092] (II) Initializing built-in extension COMPOSITE
[ 16.092] (II) Initializing built-in extension DAMAGE
[ 16.092] (II) SELinux: Disabled on system
[ 16.095] (II) Initializing extension GLX
[ 16.584] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 16.584] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.585] (II) LoadModule: "evdev"
[ 16.585] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 16.604] (II) Module evdev: vendor="X.Org Foundation"
[ 16.604] compiled for 1.12.1, module version = 2.7.0
[ 16.604] Module class: X.Org XInput Driver
[ 16.604] ABI class: X.Org XInput driver, version 16.0
[ 16.604] (II) Using input driver 'evdev' for 'Power Button'
[ 16.604] (**) Power Button: always reports core events
[ 16.604] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 16.604] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 16.604] (--) evdev: Power Button: Found keys
[ 16.604] (II) evdev: Power Button: Configuring as keyboard
[ 16.604] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 16.604] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 16.604] (**) Option "xkb_rules" "evdev"
[ 16.604] (**) Option "xkb_model" "pc105"
[ 16.604] (**) Option "xkb_layout" "pl"
[ 16.732] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 16.732] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.732] (II) Using input driver 'evdev' for 'Power Button'
[ 16.732] (**) Power Button: always reports core events
[ 16.732] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 16.732] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 16.732] (--) evdev: Power Button: Found keys
[ 16.732] (II) evdev: Power Button: Configuring as keyboard
[ 16.732] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 16.732] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 16.732] (**) Option "xkb_rules" "evdev"
[ 16.732] (**) Option "xkb_model" "pc105"
[ 16.732] (**) Option "xkb_layout" "pl"
[ 16.733] (II) config/udev: Adding input device zc3xx (/dev/input/event5)
[ 16.733] (**) zc3xx: Applying InputClass "evdev keyboard catchall"
[ 16.733] (II) Using input driver 'evdev' for 'zc3xx'
[ 16.733] (**) zc3xx: always reports core events
[ 16.733] (**) evdev: zc3xx: Device: "/dev/input/event5"
[ 16.733] (--) evdev: zc3xx: Vendor 0xac8 Product 0x305b
[ 16.733] (--) evdev: zc3xx: Found keys
[ 16.733] (II) evdev: zc3xx: Configuring as keyboard
[ 16.733] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/input/input5/event5"
[ 16.733] (II) XINPUT: Adding extended input device "zc3xx" (type: KEYBOARD, id 8)
[ 16.733] (**) Option "xkb_rules" "evdev"
[ 16.733] (**) Option "xkb_model" "pc105"
[ 16.733] (**) Option "xkb_layout" "pl"
[ 16.734] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3)
[ 16.734] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 16.734] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 16.734] (**) Logitech USB Receiver: always reports core events
[ 16.734] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event3"
[ 16.734] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52e
[ 16.734] (--) evdev: Logitech USB Receiver: Found keys
[ 16.734] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 16.734] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input3/event3"
[ 16.735] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
[ 16.735] (**) Option "xkb_rules" "evdev"
[ 16.735] (**) Option "xkb_model" "pc105"
[ 16.735] (**) Option "xkb_layout" "pl"
[ 16.736] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event4)
[ 16.736] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 16.736] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 16.736] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 16.736] (**) Logitech USB Receiver: always reports core events
[ 16.736] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event4"
[ 16.736] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52e
[ 16.736] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 16.736] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 16.736] (--) evdev: Logitech USB Receiver: Found relative axes
[ 16.736] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 16.736] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 16.736] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 16.736] (--) evdev: Logitech USB Receiver: Found keys
[ 16.736] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 16.736] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 16.736] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 16.736] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 16.736] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 16.736] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input4/event4"
[ 16.736] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 10)
[ 16.736] (**) Option "xkb_rules" "evdev"
[ 16.736] (**) Option "xkb_model" "pc105"
[ 16.736] (**) Option "xkb_layout" "pl"
[ 16.737] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 16.737] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 16.737] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 16.737] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 16.737] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 16.737] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 16.737] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 16.738] (II) No input driver specified, ignoring this device.
[ 16.738] (II) This device may have been added with another device file.
[ 16.738] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 16.738] (II) No input driver specified, ignoring this device.
[ 16.738] (II) This device may have been added with another device file.
[ 16.818] (II) NVIDIA(GPU-0): Display (LG Electronics L1919S (CRT-1)) does not support
[ 16.818] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
[ 16.818] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 16.818] (**) NVIDIA(0): device LG Electronics L1919S (CRT-1) (Using EDID
[ 16.818] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 22.681] (II) NVIDIA(GPU-0): Display (LG Electronics L1919S (CRT-1)) does not support
[ 22.681] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
[ 22.681] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 22.681] (**) NVIDIA(0): device LG Electronics L1919S (CRT-1) (Using EDID
[ 22.681] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 27.134] (II) NVIDIA(GPU-0): Display (LG Electronics L1919S (CRT-1)) does not support
[ 27.134] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
[ 27.134] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 27.134] (**) NVIDIA(0): device LG Electronics L1919S (CRT-1) (Using EDID
[ 27.134] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 30.886] (II) NVIDIA(GPU-0): Display (LG Electronics L1919S (CRT-1)) does not support
[ 30.886] (II) NVIDIA(GPU-0): NVIDIA 3D Vision stereo.
[ 30.886] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 30.886] (**) NVIDIA(0): device LG Electronics L1919S (CRT-1) (Using EDID
[ 30.886] (**) NVIDIA(0): frequencies has been enabled on all display devices.)Kod: Zaznacz cały
[ 0.205662] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0290 (mask 0007)[ 0.205714] pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101
[ 0.205730] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.205742] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.205753] pci 0000:00:1f.1: reg 18: [io 0x08f0-0x08f7]
[ 0.205765] pci 0000:00:1f.1: reg 1c: [io 0x08f8-0x08fb]
[ 0.205776] pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf]
[ 0.205823] pci 0000:00:1f.2: [8086:27c0] type 0 class 0x000101
[ 0.205840] pci 0000:00:1f.2: reg 10: [io 0xc400-0xc407]
[ 0.205851] pci 0000:00:1f.2: reg 14: [io 0xc080-0xc083]
[ 0.205861] pci 0000:00:1f.2: reg 18: [io 0xc000-0xc007]
[ 0.205871] pci 0000:00:1f.2: reg 1c: [io 0xbc00-0xbc03]
[ 0.205881] pci 0000:00:1f.2: reg 20: [io 0xb880-0xb88f]
[ 0.205923] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.205946] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[ 0.206004] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.206100] pci 0000:01:00.0: [10de:0422] type 0 class 0x000300
[ 0.206114] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
[ 0.206129] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.206143] pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
[ 0.206153] pci 0000:01:00.0: reg 24: [io 0xdc00-0xdc7f]
[ 0.206164] pci 0000:01:00.0: reg 30: [mem 0xfeae0000-0xfeafffff pref]
[ 0.206233] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.206239] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.206244] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff]
[ 0.206250] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.206300] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[ 0.206388] pci 0000:02:00.0: [10ec:8136] type 0 class 0x000200
[ 0.206410] pci 0000:02:00.0: reg 10: [io 0xe800-0xe8ff]
[ 0.206446] pci 0000:02:00.0: reg 18: [mem 0xfebff000-0xfebfffff 64bit]
[ 0.206487] pci 0000:02:00.0: reg 30: [mem 0xfebc0000-0xfebdffff pref]
[ 0.206578] pci 0000:02:00.0: supports D1 D2
[ 0.206581] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.206611] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.206624] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.206630] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.206635] pci 0000:00:1c.1: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.206714] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.206727] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.206731] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.206735] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.206740] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.206744] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode)
[ 0.206767] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.207015] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.207169] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.207251] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.207355] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.207362] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.207365] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.219347] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.219453] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.219556] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.219661] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.219763] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.219866] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.219971] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.220094] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.220280] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.220280] vgaarb: loaded
[ 0.220280] vgaarb: bridge control possible 0000:01:00.0
[ 0.220280] PCI: Using ACPI for IRQ routing
[ 0.221890] PCI: pci_cache_line_size set to 64 bytes
[ 0.221982] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.221987] reserve RAM buffer: 00000000dff90000 - 00000000dfffffff
[ 0.222211] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.222219] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.222226] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.228198] Switching to clocksource hpet
[ 0.231544] pnp: PnP ACPI init
[ 0.231578] ACPI: bus type pnp registered
[ 0.231757] pnp 00:00: [bus 00-ff]
[ 0.231762] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.231766] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.231771] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.231778] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.231782] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.231785] pnp 00:00: [mem 0xe0000000-0xffffffff window]
[ 0.231883] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.231906] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.231994] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.232000] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.232080] pnp 00:02: [dma 4]
[ 0.232085] pnp 00:02: [io 0x0000-0x000f]
[ 0.232088] pnp 00:02: [io 0x0081-0x0083]
[ 0.232091] pnp 00:02: [io 0x0087]
[ 0.232094] pnp 00:02: [io 0x0089-0x008b]
[ 0.232097] pnp 00:02: [io 0x008f]
[ 0.232100] pnp 00:02: [io 0x00c0-0x00df]
[ 0.232154] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.232179] pnp 00:03: [io 0x0070-0x0071]
[ 0.232194] pnp 00:03: [irq 8]
[ 0.232248] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.232270] pnp 00:04: [io 0x0061]
[ 0.232322] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.232342] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.232351] pnp 00:05: [irq 13]
[ 0.232406] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.232754] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
[ 0.232759] pnp 00:06: [io 0x0c00-0x0c0f]
[ 0.232762] pnp 00:06: [io 0x0290-0x029f]
[ 0.232765] pnp 00:06: [io 0x0a20-0x0a2f]
[ 0.232769] pnp 00:06: [io 0x0a30-0x0a3f]
[ 0.232860] system 00:06: [io 0x0c00-0x0c0f] has been reserved
[ 0.232865] system 00:06: [io 0x0290-0x029f] has been reserved
[ 0.232870] system 00:06: [io 0x0a20-0x0a2f] has been reserved
[ 0.232874] system 00:06: [io 0x0a30-0x0a3f] has been reserved
[ 0.232880] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.233055] pnp 00:07: [io 0x0010-0x001f]
[ 0.233059] pnp 00:07: [io 0x0022-0x003f]
[ 0.233063] pnp 00:07: [io 0x0044-0x005f]
[ 0.233066] pnp 00:07: [io 0x0062-0x0063]
[ 0.233069] pnp 00:07: [io 0x0065-0x006f]
[ 0.233073] pnp 00:07: [io 0x0072-0x007f]
[ 0.233076] pnp 00:07: [io 0x0080]
[ 0.233079] pnp 00:07: [io 0x0084-0x0086]
[ 0.233082] pnp 00:07: [io 0x0088]
[ 0.233087] pnp 00:07: [io 0x008c-0x008e]
[ 0.233091] pnp 00:07: [io 0x0090-0x009f]
[ 0.233094] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.233097] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.233100] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.233104] pnp 00:07: [io 0x0800-0x087f]
[ 0.233107] pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
[ 0.233111] pnp 00:07: [io 0x0480-0x04bf]
[ 0.233115] pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
[ 0.233118] pnp 00:07: [mem 0xfed20000-0xfed8ffff]
[ 0.233217] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.233223] system 00:07: [io 0x0800-0x087f] has been reserved
[ 0.233227] system 00:07: [io 0x0480-0x04bf] has been reserved
[ 0.233233] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.233237] system 00:07: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.233243] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.233386] pnp 00:08: [mem 0xfed00000-0xfed003ff]
[ 0.233457] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.233563] pnp 00:09: [mem 0xffb00000-0xffbfffff]
[ 0.233568] pnp 00:09: [mem 0xfff00000-0xffffffff]
[ 0.233627] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.233719] pnp 00:0a: [mem 0xffc00000-0xffefffff]
[ 0.233804] system 00:0a: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.233810] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.234038] pnp 00:0b: [io 0x0060]
[ 0.234042] pnp 00:0b: [io 0x0064]
[ 0.234046] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
[ 0.234049] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
[ 0.234138] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.234144] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.234149] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.235595] pnp 00:0c: [io 0x03f8-0x03ff]
[ 0.235605] pnp 00:0c: [irq 4]
[ 0.235609] pnp 00:0c: [dma 0 disabled]
[ 0.235756] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.235828] pnp 00:0d: [mem 0xf0000000-0xf3ffffff]
[ 0.235914] system 00:0d: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.235920] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.236285] pnp 00:0e: [mem 0x00000000-0x0009ffff]
[ 0.236290] pnp 00:0e: [mem 0x000c0000-0x000cffff]
[ 0.236293] pnp 00:0e: [mem 0x000e0000-0x000fffff]
[ 0.236297] pnp 00:0e: [mem 0x00100000-0xdfffffff]
[ 0.236301] pnp 00:0e: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.236403] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.236409] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.236414] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.236419] system 00:0e: [mem 0x00100000-0xdfffffff] could not be reserved
[ 0.236424] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.236714] pnp: PnP ACPI: found 15 devices
[ 0.236717] ACPI: ACPI bus type pnp unregistered
[ 0.246076] PCI: max bus depth: 1 pci_try_num: 2
[ 0.246122] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf4000000-0xf41fffff 64bit pref]
[ 0.246129] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf4200000-0xf43fffff]
[ 0.246135] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf4400000-0xf45fffff 64bit pref]
[ 0.246142] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.246147] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.246152] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.246158] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff]
[ 0.246163] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.246170] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[ 0.246175] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.246181] pci 0000:00:1c.0: bridge window [mem 0xf4200000-0xf43fffff]
[ 0.246187] pci 0000:00:1c.0: bridge window [mem 0xf4400000-0xf45fffff 64bit pref]
[ 0.246196] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 0.246200] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.246207] pci 0000:00:1c.1: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.246213] pci 0000:00:1c.1: bridge window [mem 0xf4000000-0xf41fffff 64bit pref]
[ 0.246221] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[ 0.246257] pci 0000:00:01.0: setting latency timer to 64
[ 0.246266] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.246274] pci 0000:00:1c.0: setting latency timer to 64
[ 0.246291] pci 0000:00:1c.1: setting latency timer to 64
[ 0.246300] pci 0000:00:1e.0: setting latency timer to 64
[ 0.246305] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.246309] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.246312] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.246316] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.246319] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xffffffff]
[ 0.246323] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.246326] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfeafffff]
[ 0.246330] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.246333] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.246337] pci_bus 0000:03: resource 1 [mem 0xf4200000-0xf43fffff]
[ 0.246340] pci_bus 0000:03: resource 2 [mem 0xf4400000-0xf45fffff 64bit pref]
[ 0.246344] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.246347] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.246351] pci_bus 0000:02: resource 2 [mem 0xf4000000-0xf41fffff 64bit pref]
[ 0.246355] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.246358] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.246361] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.246365] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.246368] pci_bus 0000:04: resource 8 [mem 0xe0000000-0xffffffff]
[ 0.246475] NET: Registered protocol family 2
[ 0.246737] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.249069] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.252706] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.253140] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.253145] TCP reno registered
[ 0.253175] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.253216] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.253423] NET: Registered protocol family 1
[ 0.253643] pci 0000:01:00.0: Boot video device
[ 0.253653] PCI: CLS 32 bytes, default 64
[ 0.253742] Unpacking initramfs...
[ 0.617201] Freeing initrd memory: 10148k freed
[ 0.622010] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.622018] Placing 64MB software IO TLB between ffff8800dbf8e000 - ffff8800dff8e000
[ 0.622021] software IO TLB at phys 0xdbf8e000 - 0xdff8e000
[ 0.622730] audit: initializing netlink socket (disabled)
[ 0.622751] type=2000 audit(1359581999.616:1): initialized
[ 0.642467] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.643572] VFS: Disk quotas dquot_6.5.2
[ 0.643623] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.643743] msgmni has been set to 7927
[ 0.644019] alg: No test for stdrng (krng)
[ 0.644073] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.644079] io scheduler noop registered
[ 0.644082] io scheduler deadline registered
[ 0.644108] io scheduler cfq registered (default)
[ 0.644249] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.644297] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.644383] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.644431] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.644521] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.644568] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.644717] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.644776] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.644779] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.645323] ERST: Table is not found!
[ 0.645326] GHES: HEST is not enabled!
[ 0.645427] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.665855] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.720735] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.721172] Linux agpgart interface v0.103
[ 0.721575] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.721990] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.722002] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.722255] mousedev: PS/2 mouse device common for all mice
[ 0.722330] rtc_cmos 00:03: RTC can wake from S4
[ 0.722492] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.722524] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.722547] cpuidle: using governor ladder
[ 0.722550] cpuidle: using governor menu
[ 0.722864] TCP cubic registered
[ 0.722933] NET: Registered protocol family 10
[ 0.723707] Mobile IPv6
[ 0.723712] NET: Registered protocol family 17
[ 0.723719] Registering the dns_resolver key type
[ 0.723962] PM: Hibernation image not present or could not be loaded.
[ 0.723980] registered taskstats version 1
[ 0.724776] rtc_cmos 00:03: setting system clock to 2013-01-30 21:40:00 UTC (1359582000)
[ 0.724854] Initializing network drop monitor service
[ 0.726805] Freeing unused kernel memory: 576k freed
[ 0.727017] Write protecting the kernel read-only data: 6144k
[ 0.730957] Freeing unused kernel memory: 660k freed
[ 0.735170] Freeing unused kernel memory: 680k freed
[ 0.755021] udevd[49]: starting version 175
[ 0.816415] usbcore: registered new interface driver usbfs
[ 0.816460] usbcore: registered new interface driver hub
[ 0.823841] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.823914] r8169 0000:02:00.0: setting latency timer to 64
[ 0.830576] usbcore: registered new device driver usb
[ 0.831334] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.831404] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.831409] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.831449] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.831495] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.831508] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.834354] SCSI subsystem initialized
[ 0.835402] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.835437] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9ffbc00
[ 0.838403] r8169 0000:02:00.0: irq 43 for MSI/MSI-X
[ 0.839128] r8169 0000:02:00.0: eth0: RTL8101e at 0xffffc90000640000, 90:e6:ba:c9:3f:e5, XID 94200000 IRQ 43
[ 0.839716] libata version 3.00 loaded.
[ 0.852746] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.856049] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.856100] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.856105] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.856109] usb usb1: Product: EHCI Host Controller
[ 0.856112] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 0.856115] usb usb1: SerialNumber: 0000:00:1d.7
[ 0.856350] hub 1-0:1.0: USB hub found
[ 0.856359] hub 1-0:1.0: 8 ports detected
[ 0.856789] ata_piix 0000:00:1f.1: version 2.13
[ 0.856875] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.876918] scsi0 : ata_piix
[ 0.883174] scsi1 : ata_piix
[ 0.885964] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.885970] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.886057] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.886131] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.886749] scsi2 : ata_piix
[ 0.887019] scsi3 : ata_piix
[ 0.889786] ata3: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xb880 irq 19
[ 0.889790] ata4: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb888 irq 19
[ 0.889853] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.889861] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.889881] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.889919] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c480
[ 0.889987] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.889992] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.889995] usb usb2: Product: UHCI Host Controller
[ 0.889998] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 0.890001] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.890305] hub 2-0:1.0: USB hub found
[ 0.890316] hub 2-0:1.0: 2 ports detected
[ 0.890455] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.890460] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.890473] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.890508] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c800
[ 0.890566] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.890571] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.890574] usb usb3: Product: UHCI Host Controller
[ 0.890577] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 0.890580] usb usb3: SerialNumber: 0000:00:1d.1
[ 0.890807] hub 3-0:1.0: USB hub found
[ 0.890817] hub 3-0:1.0: 2 ports detected
[ 0.890960] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.890965] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.890988] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.891041] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c880
[ 0.891104] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.891108] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.891112] usb usb4: Product: UHCI Host Controller
[ 0.891115] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 0.891118] usb usb4: SerialNumber: 0000:00:1d.2
[ 0.891332] hub 4-0:1.0: USB hub found
[ 0.891341] hub 4-0:1.0: 2 ports detected
[ 0.891465] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.891470] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.891482] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.891529] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000cc00
[ 0.891586] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.891591] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.891594] usb usb5: Product: UHCI Host Controller
[ 0.891597] usb usb5: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
[ 0.891600] usb usb5: SerialNumber: 0000:00:1d.3
[ 0.891785] hub 5-0:1.0: USB hub found
[ 0.891794] hub 5-0:1.0: 2 ports detected
[ 1.056322] ata1.00: ATAPI: TSSTcorpCD/DVDW SH-S182D, SB04, max UDMA/33
[ 1.072188] ata1.00: configured for UDMA/33
[ 1.073636] scsi 0:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-S182D SB04 PQ: 0 ANSI: 5
[ 1.086954] ata3.00: ATA-7: WDC WD1600AAJS-00PSA0, 05.06H05, max UDMA/133
[ 1.086961] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.100876] ata3.00: configured for UDMA/133
[ 1.101027] scsi 2:0:0:0: Direct-Access ATA WDC WD1600AAJS-0 05.0 PQ: 0 ANSI: 5
[ 1.109962] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.110061] sd 2:0:0:0: [sda] Write Protect is off
[ 1.110066] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.110107] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.126956] sda: sda1 sda2 < sda5 sda6 >
[ 1.127751] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.131225] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.131308] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.133681] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.133688] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.134089] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.524035] usb 2-1: new full-speed USB device number 2 using uhci_hcd
[ 1.620031] Refined TSC clocksource calibration: 2799.999 MHz.
[ 1.620040] Switching to clocksource tsc
[ 1.654091] PM: Starting manual resume from disk
[ 1.654097] PM: Hibernation image partition 8:5 present
[ 1.654100] PM: Looking for hibernation image.
[ 1.654422] PM: Image not found (code -22)
[ 1.654425] PM: Hibernation image not present or could not be loaded.
[ 1.682307] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.717987] usb 2-1: New USB device found, idVendor=0ac8, idProduct=305b
[ 1.717993] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.717997] usb 2-1: Product: PC Camera
[ 1.718000] usb 2-1: Manufacturer: Vimicro Corp.
[ 1.960027] usb 2-2: new full-speed USB device number 3 using uhci_hcd
[ 2.142988] usb 2-2: New USB device found, idVendor=046d, idProduct=c52e
[ 2.142994] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.142998] usb 2-2: Product: USB Receiver
[ 2.143001] usb 2-2: Manufacturer: Logitech
[ 3.046655] udevd[313]: starting version 175
[ 3.713138] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 3.713148] ACPI: Power Button [PWRB]
[ 3.713258] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 3.713264] ACPI: Power Button [PWRF]
[ 4.037055] intel_rng: FWH not detected
[ 4.064177] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 4.137884] iTCO_vendor_support: vendor-support=0
[ 4.147514] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 4.147662] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
[ 4.147763] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.157948] leds_ss4200: no LED devices found
[ 4.190198] [drm] Initialized drm 1.1.0 20060810
[ 4.268844] wmi: Mapper loaded
[ 4.466898] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 4.466937] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 4.578342] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input3
[ 4.578522] generic-usb 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-2/input0
[ 4.581760] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input4
[ 4.582499] generic-usb 0003:046D:C52E.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-2/input1
[ 4.582806] usbcore: registered new interface driver usbhid
[ 4.582811] usbhid: USB HID core driver
[ 4.768310] Linux media interface: v0.10
[ 4.965993] Linux video capture interface: v2.00
[ 4.986676] gspca_main: v2.14.0 registered
[ 5.001184] gspca_main: zc3xx-2.14.0 probing 0ac8:305b
[ 5.254596] nvidia: module license 'NVIDIA' taints kernel.
[ 5.254602] Disabling lock debugging due to kernel taint
[ 5.551428] nvidia 0000:01:00.0: setting latency timer to 64
[ 5.551438] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none :o wns=io+mem
[ 5.551751] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 310.32 Mon Jan 14 14:41:13 PST 2013
[ 6.225112] input: zc3xx as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/input/input5
[ 6.226784] usbcore: registered new interface driver zc3xx
[ 7.033715] Adding 248828k swap on /dev/sda5. Priority:-1 extents:1 across:248828k
[ 7.057840] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 7.396063] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 7.530663] loop: module loaded
[ 8.409153] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 9.376587] RPC: Registered named UNIX socket transport module.
[ 9.376592] RPC: Registered udp transport module.
[ 9.376595] RPC: Registered tcp transport module.
[ 9.376599] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 9.408130] FS-Cache: Loaded
[ 9.440586] FS-Cache: Netfs 'nfs' registered for caching
[ 9.454037] Installing knfsd (copyright (C) 1996 [EMAIL="okir@monad.swb.de"]okir@monad.swb.de[/EMAIL]).
[ 12.809044] Bluetooth: Core ver 2.16
[ 12.809084] NET: Registered protocol family 31
[ 12.809088] Bluetooth: HCI device and connection manager initialized
[ 12.809092] Bluetooth: HCI socket layer initialized
[ 12.809096] Bluetooth: L2CAP socket layer initialized
[ 12.809362] Bluetooth: SCO socket layer initialized
[ 12.820936] Bluetooth: RFCOMM TTY layer initialized
[ 12.820947] Bluetooth: RFCOMM socket layer initialized
[ 12.820951] Bluetooth: RFCOMM ver 1.11
[ 12.996198] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 12.996204] Bluetooth: BNEP filters: protocol multicast
[ 13.220323] r8169 0000:02:00.0: eth0: link down
[ 13.220334] r8169 0000:02:00.0: eth0: link down
[ 13.221158] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.805673] r8169 0000:02:00.0: eth0: link up
[ 14.806270] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 15.736819] NVRM: GPU at 0000:01:00: GPU-b79dde26-9896-89a0-743b-e515fcd16fb1
[ 25.808009] eth0: no IPv6 routers present