[+] Polecenie lspci nie pokazuje karty wifi, która dzia

Wszystko związane z jądrem systemowym, sterownikami, sprzętem itp.
jacetyh
Posty: 13
Rejestracja: 08 maja 2012, 18:17
Lokalizacja: Wrocław

[+] Polecenie lspci nie pokazuje karty wifi, która działa

Post autor: jacetyh »

Witam.

Pierwszy post i już stwarzam problemy. Mam taki mały sprzęt, specyfikacja:
[INDENT]Procesor: zainstalowany dwurdzeniowy procesor Intel Atom D525, 1,8 GHz, 512 KB L2
Częstotliwość magistrali: 667/8020 MHz
RAM: Brak (gniazdo wsparcia z SO-DIMM DDR3 1066 MHz,do 2GB)
HDD: Brak (możliwość instalacji wewnętrznego dysku SATA 2.5 HDD / SSD Interfejs dysku 1 x SATA-II)
Karta graficzna: NVIDIA GT218-ION, 512MB DDR3
Karta dźwiękowa: dwa kanały audio z Realtek ALC662 wsparcie 7.1 przez HDMI
Karta sieciowa: Realtek RTL8111DL/8111E, LAN 10/100/1000 WiFi 802.11b/g/n z anteną[/INDENT]

Idąc dalej Polecenie:

Kod: Zaznacz cały

lspci
pokazuje:

Kod: Zaznacz cały

00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge (rev 02)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02)
00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 4 (rev 02)
00:1d.0 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA Controller [IDE mode] (rev 02)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
04:00.0 VGA compatible controller: NVIDIA Corporation GT218 [ION] (rev a2)
04:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1)
Mój ogólny zamysł jest taki żeby z tego zrobić ruter/serwer dla domowego użytku.
Jestem właśnie na etapie zmiany wifi z klienta na punkt dostępu jednak nie wiem nawet jaki sterownik to obsługuje.
fnmirk
Senior Member
Posty: 8324
Rejestracja: 03 grudnia 2007, 06:37

Post autor: fnmirk »

Przedstaw wyniki:

Kod: Zaznacz cały

lspci -vnn
lspci -n
I jako root:

Kod: Zaznacz cały

ifconfig -a
jacetyh
Posty: 13
Rejestracja: 08 maja 2012, 18:17
Lokalizacja: Wrocław

Post autor: jacetyh »

Polecenie:

Kod: Zaznacz cały

lspci -vnn
pokazuje:

Kod: Zaznacz cały

00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a000] (rev 02)
        Subsystem: Device [1b0a:0111]
        Flags: bus master, fast devsel, latency 0
        Capabilities: [e0] Vendor Specific Information: Len=08 <?>

00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
        I/O behind bridge: 0000e000-0000efff
        Memory behind bridge: fd000000-febfffff
        Prefetchable memory behind bridge: 00000000ce000000-00000000dfffffff
        Capabilities: [40] Express Root Port (Slot+), MSI 00
        Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
        Capabilities: [90] Subsystem: Device [1b0a:0111]
        Capabilities: [a0] Power Management version 2
        Capabilities: [100] Virtual Channel
        Capabilities: [180] Root Complex Link
        Kernel driver in use: pcieport

00:1c.2 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        I/O behind bridge: 00001000-00001fff
        Memory behind bridge: c0500000-c06fffff
        Prefetchable memory behind bridge: 00000000c0700000-00000000c08fffff
        Capabilities: [40] Express Root Port (Slot+), MSI 00
        Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
        Capabilities: [90] Subsystem: Device [1b0a:0111]
        Capabilities: [a0] Power Management version 2
        Capabilities: [100] Virtual Channel
        Capabilities: [180] Root Complex Link
        Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: c0100000-c04fffff
        Prefetchable memory behind bridge: 00000000cdf00000-00000000cdffffff
        Capabilities: [40] Express Root Port (Slot+), MSI 00
        Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
        Capabilities: [90] Subsystem: Device [1b0a:0111]
        Capabilities: [a0] Power Management version 2
        Capabilities: [100] Virtual Channel
        Capabilities: [180] Root Complex Link
        Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
        Subsystem: Device [1b0a:0111]
        Flags: bus master, medium devsel, latency 0, IRQ 23
        I/O ports at c480 [size=200]
        Kernel driver in use: uhci_hcd

00:1d.1 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
        Subsystem: Device [1b0a:0111]
        Flags: bus master, medium devsel, latency 0, IRQ 19
        I/O ports at c800 [size=200]
        Kernel driver in use: uhci_hcd

00:1d.2 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
        Subsystem: Device [1b0a:0111]
        Flags: bus master, medium devsel, latency 0, IRQ 18
        I/O ports at c880 [size=200]
        Kernel driver in use: uhci_hcd

00:1d.3 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
        Subsystem: Device [1b0a:0111]
        Flags: bus master, medium devsel, latency 0, IRQ 16
        I/O ports at cc00 [size=200]
        Kernel driver in use: uhci_hcd

00:1d.7 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
        Subsystem: Device [1b0a:0111]
        Flags: bus master, medium devsel, latency 0, IRQ 23
        Memory at fcffbc00 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
        Capabilities: [58] Debug port: BAR=1 offset=00a0
        Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
        Capabilities: [50] Subsystem: Device [1b0a:0111]

00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02)
        Subsystem: Device [1b0a:0111]
        Flags: bus master, medium devsel, latency 0
        Capabilities: [e0] Vendor Specific Information: Len=0c <?>

00:1f.2 IDE interface [0101]: Intel Corporation N10/ICH7 Family SATA Controller [IDE mode] [8086:27c0] (rev 02) (prog-if 8a [Master SecP PriP])
        Subsystem: Device [1b0a:0111]
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
        I/O ports at 01f0 [size=200]
        I/O ports at 03f4 [size=75]
        I/O ports at 0170 [size=200]
        I/O ports at 0374 [size=75]
        I/O ports at ff90 [size=200]
        Memory at c0000000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [70] Power Management version 2
        Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02)
        Subsystem: Device [1b0a:0111]
        Flags: medium devsel, IRQ 19
        I/O ports at 0400 [size=200]
        Kernel driver in use: i801_smbus

02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06)
        Subsystem: Device [1b0a:0111]
        Flags: bus master, fast devsel, latency 0, IRQ 43
        I/O ports at d800 [size=200]
        Memory at cdfff000 (64-bit, prefetchable) [size=4K]
        Memory at cdff8000 (64-bit, prefetchable) [size=16K]
        Capabilities: [40] Power Management version 3
        Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
        Capabilities: [70] Express Endpoint, MSI 01
        Capabilities: [b0] MSI-X: Enable- Count=4 Masked-
        Capabilities: [d0] Vital Product Data
        Capabilities: [100] Advanced Error Reporting
        Capabilities: [140] Virtual Channel
        Capabilities: [160] Device Serial Number 01-00-00-00-68-4c-e0-00
        Kernel driver in use: r8169

04:00.0 VGA compatible controller [0300]: NVIDIA Corporation GT218 [ION] [10de:0a64] (rev a2) (prog-if 00 [VGA controller])
        Subsystem: Device [1b0a:0111]
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
        Memory at d0000000 (64-bit, prefetchable) [size=256M]
        Memory at ce000000 (64-bit, prefetchable) [size=32M]
        I/O ports at ec00 [size=200]
        Expansion ROM at feb00000 [disabled] [size=512K]
        Capabilities: [60] Power Management version 3
        Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
        Capabilities: [78] Express Endpoint, MSI 00
        Capabilities: [b4] Vendor Specific Information: Len=14 <?>
        Capabilities: [100] Virtual Channel
        Capabilities: [128] Power Budgeting <?>
        Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
        Kernel driver in use: nouveau

04:00.1 Audio device [0403]: NVIDIA Corporation High Definition Audio Controller [10de:0be3] (rev a1)
        Subsystem: Device [1b0a:0111]
        Flags: bus master, fast devsel, latency 0, IRQ 17
        Memory at febfc000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [60] Power Management version 3
        Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
        Capabilities: [78] Express Endpoint, MSI 00
        Kernel driver in use: snd_hda_intel 

Polecenie:

Kod: Zaznacz cały

lspci -n
pokazuje:

Kod: Zaznacz cały

00:00.0 0600: 8086:a000 (rev 02)
00:1c.0 0604: 8086:27d0 (rev 02)
00:1c.2 0604: 8086:27d4 (rev 02)
00:1c.3 0604: 8086:27d6 (rev 02)
00:1d.0 0c03: 8086:27c8 (rev 02)
00:1d.1 0c03: 8086:27c9 (rev 02)
00:1d.2 0c03: 8086:27ca (rev 02)
00:1d.3 0c03: 8086:27cb (rev 02)
00:1d.7 0c03: 8086:27cc (rev 02)
00:1e.0 0604: 8086:2448 (rev e2)
00:1f.0 0601: 8086:27bc (rev 02)
00:1f.2 0101: 8086:27c0 (rev 02)
00:1f.3 0c05: 8086:27da (rev 02)
02:00.0 0200: 10ec:8168 (rev 06)
04:00.0 0300: 10de:0a64 (rev a2)
04:00.1 0403: 10de:0be3 (rev a1) 

Polecenie:

Kod: Zaznacz cały

 ifconfig -a
 
pokazuje:

Kod: Zaznacz cały

eth0      Link encap:Ethernet  HWaddr e0:69:95:f8:2d:fe
          inet addr:192.168.0.103  Bcast:192.168.0.255  Mask:255.255.255.0
          inet6 addr: fe80::e269:95ff:fef8:2dfe/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:46053 errors:0 dropped:0 overruns:0 frame:0
          TX packets:41019 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:16954162 (16.1 MiB)  TX bytes:5696018 (5.4 MiB)
          Interrupt:43 Base address:0xc000

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

wlan0     Link encap:Ethernet  HWaddr 74:2f:68:05:e1:d6
          inet addr:10.50.100.1  Bcast:10.50.100.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

Polecenie:

Kod: Zaznacz cały

  uname -a
  
pokazuje:

Kod: Zaznacz cały

Linux nettop 3.2.0-2-amd64 #1 SMP Sun Apr 15 16:47:38 UTC 2012 x86_64 GNU/Linux

Polecenie:

Kod: Zaznacz cały

 iwconfig
pokazuje:

Kod: Zaznacz cały

lo        no wireless extensions.

wlan0     unassociated  Nickname:"rtl_wifi"
          Mode:Auto  Access Point: Not-Associated   Sensitivity:0/0
          Retry :o ff   RTS thr :o ff   Fragment thr :o ff
          Encryption key :o ff
          Power Management :o ff
          Link Quality:0  Signal level:0  Noise level:0
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

eth0      no wireless extensions.

Polecenie:

Kod: Zaznacz cały

 cat /etc/network/interfaces
 
pokazuje:

Kod: Zaznacz cały

# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
allow-hotplug eth0
iface eth0 inet dhcp


#tak tak ja to konfigurowalem ;P

iface wlan0 inet static
        # Basic interface settings
        address 10.50.100.1
        netmask 255.255.255.0
        network 10.50.100.0
        broadcast 10.50.100.255
        pre-up /usr/local/bin/wlan0_preup.sh

Dodatkowe informacje.

Wykonałem:

Kod: Zaznacz cały

modprobe rtl8192se

W tej chwili polecenie:

Kod: Zaznacz cały

lsmod 
pokazuje

Kod: Zaznacz cały

Module                  Size  Used by
rtl8192se              74082  0
rtlwifi                81350  1 rtl8192se
mac80211              192768  2 rtlwifi,rtl8192se
cfg80211              137140  2 mac80211,rtlwifi
rfkill                 19012  1 cfg80211
xt_state               12503  0
ipt_MASQUERADE         12594  0
iptable_nat            12928  0
nf_nat                 18242  2 iptable_nat,ipt_MASQUERADE
nf_conntrack_ipv4      14078  3 nf_nat,iptable_nat
nf_defrag_ipv4         12483  1 nf_conntrack_ipv4
nf_conntrack           52720  5 nf_conntrack_ipv4,nf_nat,iptable_nat,ipt_MASQUERADE,xt_state
iptable_mangle         12536  0
ip6table_filter        12540  0
ip6_tables             22175  1 ip6table_filter
iptable_filter         12536  0
ip_tables              22042  3 iptable_filter,iptable_mangle,iptable_nat
x_tables               19073  8 ip_tables,iptable_filter,ip6_tables,ip6table_filter,iptable_mangle,iptable_nat,ipt_MASQUERADE,xt_state
nfsd                  211858  2
nfs                   312191  0
nfs_acl                12511  2 nfs,nfsd
auth_rpcgss            37143  2 nfs,nfsd
fscache                36739  1 nfs
lockd                  67328  2 nfs,nfsd
sunrpc                173671  6 lockd,auth_rpcgss,nfs_acl,nfs,nfsd
loop                   22641  0
snd_hda_codec_hdmi     30783  4
nouveau               545197  1
mxm_wmi                12473  1 nouveau
wmi                    13243  1 mxm_wmi
video                  17628  1 nouveau
ttm                    48725  1 nouveau
drm_kms_helper         27227  1 nouveau
drm                   167670  3 drm_kms_helper,ttm,nouveau
psmouse                64455  0
i2c_i801               16870  0
i2c_algo_bit           12841  1 nouveau
i2c_core               23876  5 i2c_algo_bit,i2c_i801,drm,drm_kms_helper,nouveau
serio_raw              12931  0
snd_hda_intel          26345  0
snd_hda_codec          78031  2 snd_hda_intel,snd_hda_codec_hdmi
snd_hwdep              13186  1 snd_hda_codec
snd_pcm                63900  3 snd_hda_codec,snd_hda_intel,snd_hda_codec_hdmi
snd_page_alloc         13003  2 snd_pcm,snd_hda_intel
snd_timer              22917  1 snd_pcm
snd                    52850  6 snd_timer,snd_pcm,snd_hwdep,snd_hda_codec,snd_hda_intel,snd_hda_codec_hdmi
soundcore              13065  1 snd
evdev                  17562  6
r8712u                142855  0
iTCO_wdt               17081  0
pcspkr                 12579  0
iTCO_vendor_support    12704  1 iTCO_wdt
processor              28106  0
button                 12937  1 nouveau
thermal_sys            18040  2 processor,video
ext3                  161867  5
mbcache                13065  1 ext3
jbd                    56902  1 ext3
sd_mod                 36136  7
crc_t10dif             12348  1 sd_mod
ata_generic            12479  0
uhci_hcd               26865  0
ata_piix               25439  6
libata                140589  2 ata_piix,ata_generic
scsi_mod              162458  2 libata,sd_mod
ehci_hcd               40215  0
usbcore               128498  5 ehci_hcd,uhci_hcd,r8712u,rtlwifi
r8169                  46980  0
usb_common             12354  1 usbcore
mii                    12675  1 r8169
I:

Kod: Zaznacz cały

iwlist wlan0 scan
pokazuje sieci wifi w mojej okolicy.

Ale przy sprawdzaniu mam komunikat:

Kod: Zaznacz cały

hostapd -dddd /etc/hostapd/hostapd.conf
Configuration file: /etc/hostapd/hostapd.conf
ctrl_interface_group=0
nl80211: Register Action command failed: ret=-19 (No such device)
nl80211: Register Action match - hexdump(len=1): 06
nl80211: Failed to register Action frame processing - ignore for now
nl80211: Add own interface ifindex 3
nl80211: Failed to set interface 3 to mode 3: -19 (No such device)
nl80211: Failed to set interface 3 to mode 3: -19 (No such device)
nl80211: Interface mode change to 3 from 0 failed
nl80211: Failed to set interface wlan0 into AP mode
nl80211 driver initialization failed.
rmdir[ctrl_interface]: No such file or directory
ELOOP: remaining socket: sock=4 eloop_data=0x26751d0 user_data=0x2677fa0 handler=0x432cf0
ELOOP: remaining socket: sock=6 eloop_data=0x267a380 user_data=(nil) handler=0x43be80

Swoją drogą, to że działa a nie widać tego mnie nie przeszkadza jednak to dziwne. Chciałbym się dowiedzieć jaki układ tam jest.


Dodane:
Już znalazłem. Karta wifi jest podłączona pod USB, gdzieś jest to zintegrowane na płycie głównej, więc tego nie widać.
Polecenie

Kod: Zaznacz cały

lshw -C network
pokazuje

Kod: Zaznacz cały

*-network
       description: Ethernet interface
       product: RTL8111/8168B PCI Express Gigabit Ethernet controller
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:02:00.0
       logical name: eth0
       version: 06
       serial: e0:69:95:f8:2d:fe
       size: 100Mbit/s
       capacity: 1Gbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-2.fw ip=192.168.0.103 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s
       resources: irq:43 ioport:d800(size=256) memory:cdfff000-cdffffff memory:cdff8000-cdffbfff
  *-network DISABLED
       description: Wireless interface
       physical id: 1
       bus info: usb@1:1
       logical name: wlan0
        serial: 34:2f:68:05:e1:d6
       capabilities: ethernet physical wireless
configuration: broadcast=yes driver=r8712u multicast=yes wireless=unassociated 
Awatar użytkownika
marcin1982
Moderator
Posty: 1732
Rejestracja: 05 maja 2011, 12:59
Lokalizacja: Zagłębie Dąbrowskie

Post autor: marcin1982 »

Już znalazłem. Karta wifi jest podłączona pod USB, gdzieś jest to zintegrowane na płycie głównej, więc tego nie widać.
Sprawdź czy polecenie:

Kod: Zaznacz cały

lsusb
pokaże tą kartę.
jacetyh
Posty: 13
Rejestracja: 08 maja 2012, 18:17
Lokalizacja: Wrocław

Post autor: jacetyh »

Polecenie:

Kod: Zaznacz cały

lsusb -v
dało ostatecznie wynik:

Kod: Zaznacz cały

Bus 005 Device 002: ID 13d3:3323 IMC Networks
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x13d3 IMC Networks
  idProduct          0x3323
  bcdDevice            2.00
  iManufacturer           1 Manufacturer Realtek
  iProduct                2 RTL8191S WLAN Adapter
  iSerial                 3 00e04c000001
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           46
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           4
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x04  EP 4 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x06  EP 6 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x0d  EP 13 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
Fakt faktem, że trochę wcześniej już to znalazłem, tylko czasu nie miałem żeby się pochwalić. Karta działa i ma się dobrze, jedynie mam problemy żeby przestawić z klienta na punkt dostępu ale to już raczej będzie na inny temat.

Za pomoc dziękuję.
darekmarta1975
Posty: 3
Rejestracja: 25 maja 2012, 15:24

Post autor: darekmarta1975 »

Witam moze nie na temat ale posiadam taki sam sprzęt jak zakładajacy temat i mam problem z dzwiekiem po hdmi.Opisze swój problem,otóż zainstalowalem najnowsze xbmc i nie mam dzwieku po hdmi,nie mowiąc o tym ze chciałbym miec 7.1 jak to producent zapewnia.Prosze o pomoc bo walcze z tym juz kilka dni i bez efektów
Awatar użytkownika
DaVidoSS
Junior Member
Posty: 875
Rejestracja: 06 marca 2010, 11:26
Lokalizacja: ~/

Post autor: DaVidoSS »

W alsamixer pobaw się przełącznikami S/PIDIF.
darekmarta1975
Posty: 3
Rejestracja: 25 maja 2012, 15:24

Post autor: darekmarta1975 »

W tym problem ze mam spdif/off i nie moge nic wiecej wybrac,moze masz jakies rozwiazanie na to,audio po analogu dziala z innego chipsetu a z NVIDIA po hdmi nie
Awatar użytkownika
DaVidoSS
Junior Member
Posty: 875
Rejestracja: 06 marca 2010, 11:26
Lokalizacja: ~/

Post autor: DaVidoSS »

Jeśli masz S/PIDIF OFF to go włącz [m]. Oczywiście najpierw wybierz urządzenie [F6].
darekmarta1975
Posty: 3
Rejestracja: 25 maja 2012, 15:24

Post autor: darekmarta1975 »

Wiem ale sie nie da wlaczyć,ale ja spdif nie ma w swoim sprzecie,tylko po hdmi musi isc.
Powiem tak po analogu z karty na plycie z wyjscia stereo dziala i dzilalo,a po wybraniu karty Nvidia i tam jest tylko spdif ktory ma off i nie moge wlaczyc.

DZIEKI DaVidoSS
ODPOWIEDZ