[+] Zmiana menadżera okien

Zagadnienia dotyczące menadżerów okien, środowisk graficznych - X, KDE, GNOME, Fluxbox, XFCE., Compiz itp.
Kubala95
Posty: 3
Rejestracja: 29 stycznia 2012, 16:30

[+] Zmiana menadżera okien

Post autor: Kubala95 »

Witam.
Chciałem sobie zamienić metacity na inny menedżer okien (zainstalowałem Compiz), no ale do jego instalacji potrzebny jest xorg.conf, ale niestety po wydaniu polecenia:

Kod: Zaznacz cały

X -configure
otrzymuję w wyniku:

Kod: Zaznacz cały

FATAL: module fbcon not found
Dane techniczne
Jądro:

Kod: Zaznacz cały

Linux debian 3.1.0-1-486 #1 Tue Jan 10 04:55:10 UTC 2012 i686 GNU/Linux
Architektura:

Kod: Zaznacz cały

i386
Sprzęt:

Kod: Zaznacz cały

00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
    Subsystem: Toshiba America Info Systems Device ff00
    Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
    Subsystem: Toshiba America Info Systems Device ff01
    Kernel driver in use: i915
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
    Subsystem: Toshiba America Info Systems Device ff01
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
    Subsystem: Toshiba America Info Systems Device ff00
    Kernel driver in use: uhci_hcd
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
    Subsystem: Toshiba America Info Systems Device ff00
    Kernel driver in use: uhci_hcd
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
    Subsystem: Toshiba America Info Systems Device ff00
    Kernel driver in use: uhci_hcd
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
    Subsystem: Toshiba America Info Systems Device ff00
    Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
    Subsystem: Toshiba America Info Systems Device ff00
    Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
    Kernel driver in use: pcieport
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
    Kernel driver in use: pcieport
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
    Kernel driver in use: pcieport
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
    Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
    Subsystem: Toshiba America Info Systems Device ff00
    Kernel driver in use: uhci_hcd
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
    Subsystem: Toshiba America Info Systems Device ff00
    Kernel driver in use: uhci_hcd
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
    Subsystem: Toshiba America Info Systems Device ff00
    Kernel driver in use: uhci_hcd
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
    Subsystem: Toshiba America Info Systems Device ff00
    Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
    Subsystem: Toshiba America Info Systems Device ff00
00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03)
    Subsystem: Toshiba America Info Systems Device ff00
    Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
    Subsystem: Toshiba America Info Systems Device ff00
    Kernel driver in use: i801_smbus
0e:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
    Subsystem: Toshiba America Info Systems Device ff00
    Kernel driver in use: r8169
I dodatkowe info do grafiki:

Kod: Zaznacz cały

00:00.0 0600: 8086:2a40 (rev 07)
00:02.0 0300: 8086:2a42 (rev 07)
00:02.1 0380: 8086:2a43 (rev 07)
00:1a.0 0c03: 8086:2937 (rev 03)
00:1a.1 0c03: 8086:2938 (rev 03)
00:1a.2 0c03: 8086:2939 (rev 03)
00:1a.7 0c03: 8086:293c (rev 03)
00:1b.0 0403: 8086:293e (rev 03)
00:1c.0 0604: 8086:2940 (rev 03)
00:1c.2 0604: 8086:2944 (rev 03)
00:1c.3 0604: 8086:2946 (rev 03)
00:1c.5 0604: 8086:294a (rev 03)
00:1d.0 0c03: 8086:2934 (rev 03)
00:1d.1 0c03: 8086:2935 (rev 03)
00:1d.2 0c03: 8086:2936 (rev 03)
00:1d.7 0c03: 8086:293a (rev 03)
00:1e.0 0604: 8086:2448 (rev 93)
00:1f.0 0601: 8086:2919 (rev 03)
00:1f.2 0106: 8086:2929 (rev 03)
00:1f.3 0c05: 8086:2930 (rev 03)
0e:00.0 0200: 10ec:8136 (rev 02)
Xorg log:

Kod: Zaznacz cały

[   717.308] 
X.Org X Server 1.11.3.901 (1.11.4 RC 1)
Release Date: 2012-01-06
[   717.308] X Protocol Version 11, Revision 0
[   717.308] Build Operating System: Linux 2.6.32-5-amd64 i686 Debian
[   717.308] Current Operating System: Linux debian 3.1.0-1-486 #1 Tue Jan 10 04:55:10 UTC 2012 i686
[   717.308] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.1.0-1-486 root=UUID=98680868-504a-4f5d-8823-9e2f01614a38 ro quiet
[   717.308] Build Date: 19 January 2012  10:32:06AM
[   717.308] xorg-server 2:1.11.3.901-2 (Cyril Brulebois <kibi@debian.org>) 
[   717.308] Current version of pixman: 0.24.2
[   717.308] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   717.308] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   717.309] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 30 22:38:57 2012
[   717.309] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   717.309] (==) No Layout section.  Using the first Screen section.
[   717.309] (==) No screen section available. Using defaults.
[   717.309] (**) |-->Screen "Default Screen Section" (0)
[   717.309] (**) |   |-->Monitor "<default monitor>"
[   717.309] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   717.309] (==) Automatically adding devices
[   717.309] (==) Automatically enabling devices
[   717.309] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   717.309] 	Entry deleted from font path.
[   717.309] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[   717.309] 	Entry deleted from font path.
[   717.309] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[   717.309] 	Entry deleted from font path.
[   717.309] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[   717.309] 	Entry deleted from font path.
[   717.309] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[   717.309] 	Entry deleted from font path.
[   717.309] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[   717.309] 	Entry deleted from font path.
[   717.309] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[   717.310] 	Entry deleted from font path.
[   717.310] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	built-ins
[   717.310] (==) ModulePath set to "/usr/lib/xorg/modules"
[   717.310] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   717.310] (II) Loader magic: 0xb786c580
[   717.310] (II) Module ABI versions:
[   717.310] 	X.Org ANSI C Emulation: 0.4
[   717.310] 	X.Org Video Driver: 11.0
[   717.310] 	X.Org XInput driver : 13.0
[   717.310] 	X.Org Server Extension : 6.0
[   717.310] (--) PCI:*(0:0:2:0) 8086:2a42:1179:ff01 rev 7, Mem @ 0xf2400000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
[   717.311] (--) PCI: (0:0:2:1) 8086:2a43:1179:ff01 rev 7, Mem @ 0xf2100000/1048576
[   717.311] (II) Open ACPI successful (/var/run/acpid.socket)
[   717.311] (II) LoadModule: "extmod"
[   717.311] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[   717.311] (II) Module extmod: vendor="X.Org Foundation"
[   717.311] 	compiled for 1.11.3.901, module version = 1.0.0
[   717.311] 	Module class: X.Org Server Extension
[   717.311] 	ABI class: X.Org Server Extension, version 6.0
[   717.311] (II) Loading extension SELinux
[   717.311] (II) Loading extension MIT-SCREEN-SAVER
[   717.311] (II) Loading extension XFree86-VidModeExtension
[   717.311] (II) Loading extension XFree86-DGA
[   717.311] (II) Loading extension DPMS
[   717.311] (II) Loading extension XVideo
[   717.311] (II) Loading extension XVideo-MotionCompensation
[   717.311] (II) Loading extension X-Resource
[   717.311] (II) LoadModule: "dbe"
[   717.312] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[   717.312] (II) Module dbe: vendor="X.Org Foundation"
[   717.312] 	compiled for 1.11.3.901, module version = 1.0.0
[   717.312] 	Module class: X.Org Server Extension
[   717.312] 	ABI class: X.Org Server Extension, version 6.0
[   717.312] (II) Loading extension DOUBLE-BUFFER
[   717.312] (II) LoadModule: "glx"
[   717.312] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   717.312] (II) Module glx: vendor="X.Org Foundation"
[   717.312] 	compiled for 1.11.3.901, module version = 1.0.0
[   717.312] 	ABI class: X.Org Server Extension, version 6.0
[   717.312] (==) AIGLX enabled
[   717.312] (II) Loading extension GLX
[   717.312] (II) LoadModule: "record"
[   717.312] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[   717.312] (II) Module record: vendor="X.Org Foundation"
[   717.312] 	compiled for 1.11.3.901, module version = 1.13.0
[   717.312] 	Module class: X.Org Server Extension
[   717.312] 	ABI class: X.Org Server Extension, version 6.0
[   717.312] (II) Loading extension RECORD
[   717.312] (II) LoadModule: "dri"
[   717.312] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[   717.313] (II) Module dri: vendor="X.Org Foundation"
[   717.313] 	compiled for 1.11.3.901, module version = 1.0.0
[   717.313] 	ABI class: X.Org Server Extension, version 6.0
[   717.313] (II) Loading extension XFree86-DRI
[   717.313] (II) LoadModule: "dri2"
[   717.313] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[   717.313] (II) Module dri2: vendor="X.Org Foundation"
[   717.313] 	compiled for 1.11.3.901, module version = 1.2.0
[   717.313] 	ABI class: X.Org Server Extension, version 6.0
[   717.313] (II) Loading extension DRI2
[   717.313] (==) Matched intel as autoconfigured driver 0
[   717.313] (==) Matched vesa as autoconfigured driver 1
[   717.313] (==) Matched fbdev as autoconfigured driver 2
[   717.313] (==) Assigned the driver to the xf86ConfigLayout
[   717.313] (II) LoadModule: "intel"
[   717.313] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[   717.313] (II) Module intel: vendor="X.Org Foundation"
[   717.313] 	compiled for 1.11.1.902, module version = 2.17.0
[   717.313] 	Module class: X.Org Video Driver
[   717.313] 	ABI class: X.Org Video Driver, version 11.0
[   717.313] (II) LoadModule: "vesa"
[   717.313] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   717.313] (II) Module vesa: vendor="X.Org Foundation"
[   717.313] 	compiled for 1.11.0, module version = 2.3.0
[   717.313] 	Module class: X.Org Video Driver
[   717.313] 	ABI class: X.Org Video Driver, version 11.0
[   717.313] (II) LoadModule: "fbdev"
[   717.314] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   717.314] (II) Module fbdev: vendor="X.Org Foundation"
[   717.314] 	compiled for 1.11.0, module version = 0.4.2
[   717.314] 	ABI class: X.Org Video Driver, version 11.0
[   717.314] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
	i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
	E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
	965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
	4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
	Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
	Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
	Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
	Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
	Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[   717.314] (II) VESA: driver for VESA chipsets: vesa
[   717.314] (II) FBDEV: driver for framebuffer: fbdev
[   717.314] (++) using VT number 8

[   717.321] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[   717.321] (WW) Falling back to old probe method for vesa
[   717.321] (WW) Falling back to old probe method for fbdev
[   717.321] (II) Loading sub module "fbdevhw"
[   717.321] (II) LoadModule: "fbdevhw"
[   717.321] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[   717.321] (II) Module fbdevhw: vendor="X.Org Foundation"
[   717.321] 	compiled for 1.11.3.901, module version = 0.0.2
[   717.321] 	ABI class: X.Org Video Driver, version 11.0
[   717.321] drmOpenDevice: node name is /dev/dri/card0
[   717.321] drmOpenDevice: open result is 9, (OK)
[   717.321] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[   717.321] drmOpenDevice: node name is /dev/dri/card0
[   717.321] drmOpenDevice: open result is 9, (OK)
[   717.321] drmOpenByBusid: drmOpenMinor returns 9
[   717.321] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[   717.321] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   717.321] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[   717.321] (==) intel(0): RGB weight 888
[   717.321] (==) intel(0): Default visual is TrueColor
[   717.321] (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[   717.321] (--) intel(0): Chipset: "GM45"
[   717.322] (**) intel(0): Relaxed fencing enabled
[   717.322] (**) intel(0): Wait on SwapBuffers? enabled
[   717.322] (**) intel(0): Triple buffering? enabled
[   717.322] (**) intel(0): Framebuffer tiled
[   717.322] (**) intel(0): Pixmaps tiled
[   717.322] (**) intel(0): 3D buffers tiled
[   717.322] (**) intel(0): SwapBuffers wait enabled
[   717.322] (==) intel(0): video overlay key set to 0x101fe
[   717.322] (II) intel(0): Output LVDS1 has no monitor section
[   717.336] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[   717.352] (II) intel(0): Output VGA1 has no monitor section
[   717.371] (II) intel(0): Output HDMI1 has no monitor section
[   717.371] (II) intel(0): Output DP1 has no monitor section
[   717.420] (II) intel(0): Output DP2 has no monitor section
[   717.728] (II) intel(0): Output TV1 has no monitor section
[   717.729] (II) intel(0): EDID for output LVDS1
[   717.729] (II) intel(0): Manufacturer: SEC  Model: 5441  Serial#: 0
[   717.729] (II) intel(0): Year: 2008  Week: 0
[   717.729] (II) intel(0): EDID Version: 1.3
[   717.729] (II) intel(0): Digital Display Input
[   717.729] (II) intel(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[   717.729] (II) intel(0): Gamma: 2.20
[   717.729] (II) intel(0): No DPMS capabilities specified
[   717.729] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[   717.729] (II) intel(0): First detailed timing is preferred mode
[   717.729] (II) intel(0): redX: 0.620 redY: 0.355   greenX: 0.300 greenY: 0.580
[   717.729] (II) intel(0): blueX: 0.150 blueY: 0.090   whiteX: 0.313 whiteY: 0.329
[   717.729] (II) intel(0): Manufacturer's mask: 0
[   717.729] (II) intel(0): Supported detailed timing:
[   717.729] (II) intel(0): clock: 72.3 MHz   Image Size:  344 x 193 mm
[   717.729] (II) intel(0): h_active: 1366  h_sync: 1414  h_sync_end 1446 h_blank_end 1526 h_border: 0
[   717.729] (II) intel(0): v_active: 768  v_sync: 770  v_sync_end 775 v_blanking: 790 v_border: 0
[   717.729] (II) intel(0): Unknown vendor-specific block f
[   717.729] (II) intel(0):  SAMSUNG
[   717.729] (II) intel(0):  156AT01-U01
[   717.729] (II) intel(0): EDID (in hex):
[   717.729] (II) intel(0): 	00ffffffffffff004ca3415400000000
[   717.729] (II) intel(0): 	00120103802213780ace859e5b4c9426
[   717.729] (II) intel(0): 	17505400000001010101010101010101
[   717.729] (II) intel(0): 	010101010101411c56a0500016303020
[   717.729] (II) intel(0): 	250058c1100000190000000f00000000
[   717.729] (II) intel(0): 	00000000001eb4027400000000fe0053
[   717.729] (II) intel(0): 	414d53554e470a2020202020000000fe
[   717.729] (II) intel(0): 	00313536415430312d5530310a2000be
[   717.729] (II) intel(0): EDID vendor "SEC", prod id 21569
[   717.729] (II) intel(0): Printing DDC gathered Modelines:
[   717.729] (II) intel(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz)
[   717.730] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[   717.730] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   717.730] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   717.730] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[   717.730] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[   717.730] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[   717.730] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[   717.730] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[   717.730] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[   717.730] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[   717.730] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[   717.730] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[   717.730] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[   717.730] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[   717.730] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[   717.730] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[   717.730] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[   717.730] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[   717.730] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[   717.730] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[   717.730] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[   717.730] (II) intel(0): Printing probed modes for output LVDS1
[   717.730] (II) intel(0): Modeline "1366x768"x60.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz)
[   717.730] (II) intel(0): Modeline "1360x768"x59.8   84.75  1360 1432 1568 1776  768 771 781 798 -hsync +vsync (47.7 kHz)
[   717.730] (II) intel(0): Modeline "1360x768"x60.0   72.00  1360 1408 1440 1520  768 771 781 790 +hsync -vsync (47.4 kHz)
[   717.730] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[   717.730] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[   717.730] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[   717.730] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[   717.752] (II) intel(0): EDID for output VGA1
[   717.771] (II) intel(0): EDID for output HDMI1
[   717.771] (II) intel(0): EDID for output DP1
[   717.820] (II) intel(0): EDID for output DP2
[   718.224] (II) intel(0): EDID for output TV1
[   718.224] (II) intel(0): Output LVDS1 connected
[   718.224] (II) intel(0): Output VGA1 disconnected
[   718.224] (II) intel(0): Output HDMI1 disconnected
[   718.224] (II) intel(0): Output DP1 disconnected
[   718.224] (II) intel(0): Output DP2 disconnected
[   718.224] (II) intel(0): Output TV1 disconnected
[   718.225] (II) intel(0): Using exact sizes for initial modes
[   718.225] (II) intel(0): Output LVDS1 using initial mode 1366x768
[   718.225] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   718.225] (II) intel(0): Kernel page flipping support detected, enabling
[   718.225] (**) intel(0): Display dimensions: (340, 190) mm
[   718.225] (**) intel(0): DPI set to (102, 102)
[   718.225] (II) Loading sub module "fb"
[   718.225] (II) LoadModule: "fb"
[   718.225] (II) Loading /usr/lib/xorg/modules/libfb.so
[   718.225] (II) Module fb: vendor="X.Org Foundation"
[   718.225] 	compiled for 1.11.3.901, module version = 1.0.0
[   718.225] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   718.225] (II) Loading sub module "dri2"
[   718.225] (II) LoadModule: "dri2"
[   718.225] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[   718.225] (II) Module dri2: vendor="X.Org Foundation"
[   718.225] 	compiled for 1.11.3.901, module version = 1.2.0
[   718.225] 	ABI class: X.Org Server Extension, version 6.0
[   718.226] (II) UnloadModule: "vesa"
[   718.226] (II) Unloading vesa
[   718.226] (II) UnloadModule: "fbdev"
[   718.226] (II) Unloading fbdev
[   718.226] (II) UnloadModule: "fbdevhw"
[   718.226] (II) Unloading fbdevhw
[   718.226] (==) Depth 24 pixmap format is 32 bpp
[   718.226] (II) intel(0): [DRI2] Setup complete
[   718.226] (II) intel(0): [DRI2]   DRI driver: i965
[   718.226] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[   718.240] (II) UXA(0): Driver registered support for the following operations:
[   718.240] (II)         solid
[   718.240] (II)         copy
[   718.240] (II)         composite (RENDER acceleration)
[   718.240] (II)         put_image
[   718.240] (II)         get_image
[   718.240] (==) intel(0): Backing store disabled
[   718.240] (==) intel(0): Silken mouse enabled
[   718.240] (II) intel(0): Initializing HW Cursor
[   718.300] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   718.344] (==) intel(0): DPMS enabled
[   718.344] (==) intel(0): Intel XvMC decoder enabled
[   718.344] (II) intel(0): Set up textured video
[   718.345] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[   718.345] (II) intel(0): direct rendering: DRI2 Enabled
[   718.345] (==) intel(0): hotplug detection: "enabled"
[   718.345] (--) RandR disabled
[   718.345] (II) Initializing built-in extension Generic Event Extension
[   718.345] (II) Initializing built-in extension SHAPE
[   718.345] (II) Initializing built-in extension MIT-SHM
[   718.345] (II) Initializing built-in extension XInputExtension
[   718.345] (II) Initializing built-in extension XTEST
[   718.345] (II) Initializing built-in extension BIG-REQUESTS
[   718.345] (II) Initializing built-in extension SYNC
[   718.345] (II) Initializing built-in extension XKEYBOARD
[   718.345] (II) Initializing built-in extension XC-MISC
[   718.345] (II) Initializing built-in extension SECURITY
[   718.345] (II) Initializing built-in extension XINERAMA
[   718.345] (II) Initializing built-in extension XFIXES
[   718.345] (II) Initializing built-in extension RENDER
[   718.345] (II) Initializing built-in extension RANDR
[   718.345] (II) Initializing built-in extension COMPOSITE
[   718.345] (II) Initializing built-in extension DAMAGE
[   718.345] (II) SELinux: Disabled on system
[   718.364] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   718.364] (II) AIGLX: enabled GLX_INTEL_swap_event
[   718.364] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[   718.364] (II) AIGLX: enabled GLX_SGI_make_current_read
[   718.364] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   718.364] (II) AIGLX: Loaded and initialized i965
[   718.364] (II) GLX: Initialized DRI2 GL provider for screen 0
[   718.365] (II) intel(0): Setting screen physical size to 361 x 203
[   718.396] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[   718.396] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   718.396] (II) LoadModule: "evdev"
[   718.396] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   718.396] (II) Module evdev: vendor="X.Org Foundation"
[   718.396] 	compiled for 1.11.0, module version = 2.6.0
[   718.396] 	Module class: X.Org XInput Driver
[   718.396] 	ABI class: X.Org XInput driver, version 13.0
[   718.396] (II) Using input driver 'evdev' for 'Power Button'
[   718.396] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   718.396] (**) Power Button: always reports core events
[   718.397] (**) Power Button: Device: "/dev/input/event3"
[   718.397] (--) Power Button: Found keys
[   718.397] (II) Power Button: Configuring as keyboard
[   718.397] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[   718.397] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   718.397] (**) Option "xkb_rules" "evdev"
[   718.397] (**) Option "xkb_model" "pc105"
[   718.397] (**) Option "xkb_layout" "pl"
[   718.418] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[   718.418] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   718.418] (II) Using input driver 'evdev' for 'Video Bus'
[   718.418] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   718.418] (**) Video Bus: always reports core events
[   718.418] (**) Video Bus: Device: "/dev/input/event11"
[   718.418] (--) Video Bus: Found keys
[   718.418] (II) Video Bus: Configuring as keyboard
[   718.418] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input11/event11"
[   718.418] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   718.418] (**) Option "xkb_rules" "evdev"
[   718.418] (**) Option "xkb_model" "pc105"
[   718.418] (**) Option "xkb_layout" "pl"
[   718.418] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[   718.418] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   718.418] (II) Using input driver 'evdev' for 'Power Button'
[   718.418] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   718.418] (**) Power Button: always reports core events
[   718.418] (**) Power Button: Device: "/dev/input/event2"
[   718.418] (--) Power Button: Found keys
[   718.418] (II) Power Button: Configuring as keyboard
[   718.419] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[   718.419] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[   718.419] (**) Option "xkb_rules" "evdev"
[   718.419] (**) Option "xkb_model" "pc105"
[   718.419] (**) Option "xkb_layout" "pl"
[   718.419] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[   718.419] (II) No input driver/identifier specified (ignoring)
[   718.419] (II) config/udev: Adding input device USB2.0 UVC WebCam (/dev/input/event9)
[   718.419] (**) USB2.0 UVC WebCam: Applying InputClass "evdev keyboard catchall"
[   718.419] (II) Using input driver 'evdev' for 'USB2.0 UVC WebCam'
[   718.419] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   718.420] (**) USB2.0 UVC WebCam: always reports core events
[   718.420] (**) USB2.0 UVC WebCam: Device: "/dev/input/event9"
[   718.420] (--) USB2.0 UVC WebCam: Found keys
[   718.420] (II) USB2.0 UVC WebCam: Configuring as keyboard
[   718.420] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input9/event9"
[   718.420] (II) XINPUT: Adding extended input device "USB2.0 UVC WebCam" (type: KEYBOARD, id 9)
[   718.420] (**) Option "xkb_rules" "evdev"
[   718.420] (**) Option "xkb_model" "pc105"
[   718.420] (**) Option "xkb_layout" "pl"
[   718.420] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
[   718.420] (II) No input driver/identifier specified (ignoring)
[   718.420] (II) config/udev: Adding input device HDA Intel HDMI/DP (/dev/input/event6)
[   718.420] (II) No input driver/identifier specified (ignoring)
[   718.421] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event7)
[   718.421] (II) No input driver/identifier specified (ignoring)
[   718.421] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event8)
[   718.421] (II) No input driver/identifier specified (ignoring)
[   718.421] (II) config/udev: Adding input device Genius Optical Mouse (/dev/input/event10)
[   718.421] (**) Genius Optical Mouse: Applying InputClass "evdev pointer catchall"
[   718.421] (II) Using input driver 'evdev' for 'Genius Optical Mouse'
[   718.421] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   718.421] (**) Genius Optical Mouse: always reports core events
[   718.421] (**) Genius Optical Mouse: Device: "/dev/input/event10"
[   718.421] (--) Genius Optical Mouse: Found 3 mouse buttons
[   718.422] (--) Genius Optical Mouse: Found scroll wheel(s)
[   718.422] (--) Genius Optical Mouse: Found relative axes
[   718.422] (--) Genius Optical Mouse: Found x and y relative axes
[   718.422] (II) Genius Optical Mouse: Configuring as mouse
[   718.422] (II) Genius Optical Mouse: Adding scrollwheel support
[   718.422] (**) Genius Optical Mouse: YAxisMapping: buttons 4 and 5
[   718.422] (**) Genius Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   718.422] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input10/event10"
[   718.422] (II) XINPUT: Adding extended input device "Genius Optical Mouse" (type: MOUSE, id 10)
[   718.422] (II) Genius Optical Mouse: initialized for relative axes.
[   718.422] (**) Genius Optical Mouse: (accel) keeping acceleration scheme 1
[   718.422] (**) Genius Optical Mouse: (accel) acceleration profile 0
[   718.422] (**) Genius Optical Mouse: (accel) acceleration factor: 2.000
[   718.422] (**) Genius Optical Mouse: (accel) acceleration threshold: 4
[   718.422] (II) config/udev: Adding input device Genius Optical Mouse (/dev/input/mouse0)
[   718.422] (II) No input driver/identifier specified (ignoring)
[   718.422] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   718.422] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   718.422] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   718.422] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   718.423] (**) AT Translated Set 2 keyboard: always reports core events
[   718.423] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[   718.423] (--) AT Translated Set 2 keyboard: Found keys
[   718.423] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[   718.423] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[   718.423] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[   718.423] (**) Option "xkb_rules" "evdev"
[   718.423] (**) Option "xkb_model" "pc105"
[   718.423] (**) Option "xkb_layout" "pl"
[   718.423] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event12)
[   718.423] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[   718.423] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[   718.423] (II) LoadModule: "synaptics"
[   718.424] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[   718.424] (II) Module synaptics: vendor="X.Org Foundation"
[   718.424] 	compiled for 1.11.2.902, module version = 1.5.0
[   718.424] 	Module class: X.Org XInput Driver
[   718.424] 	ABI class: X.Org XInput driver, version 13.0
[   718.424] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[   718.424] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[   718.424] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   718.424] (**) Option "Device" "/dev/input/event12"
[   718.424] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5772
[   718.424] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5086
[   718.424] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[   718.424] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 0
[   718.424] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[   718.424] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[   718.424] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   718.424] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   718.424] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input12/event12"
[   718.424] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[   718.424] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[   718.424] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[   718.424] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.035
[   718.424] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[   718.424] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[   718.424] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[   718.424] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[   718.424] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   718.425] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[   718.425] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[   718.425] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[   718.425] (II) No input driver/identifier specified (ignoring)
[   718.431] (II) intel(0): EDID vendor "SEC", prod id 21569
[   718.431] (II) intel(0): Printing DDC gathered Modelines:
[   718.431] (II) intel(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz)
[   718.966] (II) intel(0): EDID vendor "SEC", prod id 21569
[   718.966] (II) intel(0): Printing DDC gathered Modelines:
[   718.966] (II) intel(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz)
[   719.561] (II) intel(0): EDID vendor "SEC", prod id 21569
[   719.561] (II) intel(0): Printing DDC gathered Modelines:
[   719.561] (II) intel(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz)
[   720.028] (II) intel(0): EDID vendor "SEC", prod id 21569
[   720.028] (II) intel(0): Printing DDC gathered Modelines:
[   720.028] (II) intel(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz)
[   720.584] (II) intel(0): EDID vendor "SEC", prod id 21569
[   720.584] (II) intel(0): Printing DDC gathered Modelines:
[   720.584] (II) intel(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz)
[   720.991] (II) intel(0): EDID vendor "SEC", prod id 21569
[   720.991] (II) intel(0): Printing DDC gathered Modelines:
[   720.991] (II) intel(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz)
[   721.367] (II) intel(0): EDID vendor "SEC", prod id 21569
[   721.367] (II) intel(0): Printing DDC gathered Modelines:
[   721.367] (II) intel(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz)
[   721.911] (II) intel(0): EDID vendor "SEC", prod id 21569
[   721.911] (II) intel(0): Printing DDC gathered Modelines:
[   721.911] (II) intel(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz)
[   732.955] (II) intel(0): EDID vendor "SEC", prod id 21569
[   732.955] (II) intel(0): Printing DDC gathered Modelines:
[   732.955] (II) intel(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz)
[   733.518] (II) intel(0): EDID vendor "SEC", prod id 21569
[   733.518] (II) intel(0): Printing DDC gathered Modelines:
[   733.518] (II) intel(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz)
[   733.918] (II) intel(0): EDID vendor "SEC", prod id 21569
[   733.918] (II) intel(0): Printing DDC gathered Modelines:
[   733.918] (II) intel(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz)
[   734.289] (II) intel(0): EDID vendor "SEC", prod id 21569
[   734.289] (II) intel(0): Printing DDC gathered Modelines:
[   734.289] (II) intel(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz)
[   734.847] (II) intel(0): EDID vendor "SEC", prod id 21569
[   734.847] (II) intel(0): Printing DDC gathered Modelines:
[   734.847] (II) intel(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz)
[   735.195] (II) intel(0): EDID vendor "SEC", prod id 21569
[   735.195] (II) intel(0): Printing DDC gathered Modelines:
[   735.195] (II) intel(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz)
[   735.865] (II) intel(0): EDID vendor "SEC", prod id 21569
[   735.865] (II) intel(0): Printing DDC gathered Modelines:
[   735.865] (II) intel(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz)
[   737.822] (II) intel(0): EDID vendor "SEC", prod id 21569
[   737.822] (II) intel(0): Printing DDC gathered Modelines:
[   737.822] (II) intel(0): Modeline "1366x768"x0.0   72.33  1366 1414 1446 1526  768 770 775 790 -hsync -vsync (47.4 kHz)
Proszę o pomoc, z góry dziękuję.
fnmirk
Senior Member
Posty: 8324
Rejestracja: 03 grudnia 2007, 06:37

Post autor: fnmirk »

Już ci napisano abyś się nie bawił w tworzenie pliku xorg.conf. Nie jest on do niczego potrzebny. Przecież według tego co przedstawiłeś nic się z Twoim systemem nie dzieje złego.

Jak chcesz sprawdzić działanie compiza pobierz sobie Knoppiksa.
http://debian.linux.pl/threads/9479-Dys ... #post61503
i przekonasz się, że plik xorg.conf nie jest potrzebny, a compiz działa.

Przedstaw co pokazuje polecenie:

Kod: Zaznacz cały

dpkg -l grep compiz
Kubala95
Posty: 3
Rejestracja: 29 stycznia 2012, 16:30

Post autor: Kubala95 »

Proszę bardzo, oto wynik polecenia, które podałeś:

Kod: Zaznacz cały

Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Nazwa          Wersja         Opis
+++-==============-==============-============================================
ii  compiz         0.8.4-5        OpenGL window and compositing manager
ii  grep           2.10-1         GNU grep, egrep and fgrep
Jeśli znasz sposób na ominięcie xorg.conf to bardzo proszę o pomoc. Ja korzystałem z tego poradnika: http://wiki.debian.org/Compiz


PS. Po wpisaniu bez żadnego xorg.conf:

Kod: Zaznacz cały

compiz --replace
Otrzymuję błąd o niemożności zmiany menedżera okien i restartuje gdm.

Przy zrobieniu tego w trybie klasycznego GNOME (Fallback) dzieje się coś, ale jedynym efektem są przezroczyste belki. To mi wyskoczyło:

Kod: Zaznacz cały

compiz (core) - Warn: SmcOpenConnection failed: None of the authentication protocols specified are supported
Backend     : ini
Integration : true
Profile     : default
Adding plugins
Initializing core options...done
Initializing move options...done
Initializing resize options...done
Initializing place options...done
Initializing decoration options...done
Dodatkowo po wyłączeniu terminala znikają obramowania okien.

PS 2:
W tym poradniku jest mowa o niekonieczności edycji pliku w przypadku nowszych sterowników xserver-xorg-video właśnie do Intela, ale powyższa moja informacja pokazuje, że problem jest dalej.

Edycja:
GNOME 3 to jakaś pomyłka, zainstalowałem KDE i wszystko działa bez problemu, xorg.conf faktycznie jest niepotrzebny. W ogóle to środowisko wydaje mi się teraz dużo lepsze od GNOME, jest bardziej uporządkowane. Dziękuję wszystkim za wszelkie sugestie, temat można chyba zamknąć.
fnmirk
Senior Member
Posty: 8324
Rejestracja: 03 grudnia 2007, 06:37

Post autor: fnmirk »

Dopiero dzisiaj mogłem sprawdzić compiza.

Kubala95, przepraszam, błędnie podałem ostatnie polecenie. Prawidłowe zapytanie o zainstalowane pakiety, związane z copizem powinno wyglądać tak:

Kod: Zaznacz cały

dpkg -l | grep compiz
Jeżeli chcesz mieć sprawnie i wydajnie działający system z zainstalowanym compizem zainteresuj się środowiskiem LXDE.

Jak to działa, możesz sprawdzić bez instalacji, pobierając np. obraz iso wersji livecd Knoppiksa.
http://debian.linux.pl/threads/9479-Dys ... #post61503
Kubala95
Posty: 3
Rejestracja: 29 stycznia 2012, 16:30

Post autor: Kubala95 »

Wiem, że temat teoretycznie zakończony, ale muszę jednak zwrócić honor GNOME 3, przynajmniej jeśli chodzi o tryb Fallback. Compiza da się jednak uruchomić, a rozwiązanie jest bardzo proste:
Należy otworzyć plik (oczywiście na prawach roota):

Kod: Zaznacz cały

/usr/share/gnome-session/sessions/gnome-fallback.session
Odnaleźć linijkę:

Kod: Zaznacz cały

DefaultProvider-windowmanager=metacity
i zamienić ją na:

Kod: Zaznacz cały

DefaultProvider-windowmanager=compiz
Wystarczy się wylogować i ponownie zalogować, a Compiz powinien ruszyć.
ODPOWIEDZ