Posiadam kartę sieciową Cisco AIR-CB21AG-E-K9 na złącze PCMCIA. Zainstalowałem do obsługi karty pakiet madwifi.
Ale po instalacji madwifi karta nadal nie pojawia się, gdy wywołuję polecenie ifconfig lub iwconfig.
lspci
Kod: Zaznacz cały
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
02:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02)
04:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01)
0f:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
0f:06.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller
0f:06.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
0f:06.3 SD Host controller: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller
10:00.0 Ethernet controller: Atheros Communications Inc. Atheros AR5001X+ Wireless Network Adapter (rev 01)
Kod: Zaznacz cały
Module Size Used by
aes_x86_64 7340 1
aes_generic 25714 1 aes_x86_64
ath5k 112002 0
ath 7974 1 ath5k
acpi_cpufreq 5539 1
cpufreq_conservative 5162 0
cpufreq_powersave 902 0
cpufreq_stats 2740 0
cpufreq_userspace 1960 0
parport_pc 18855 1
ppdev 5030 0
lp 7462 0
parport 27954 3 parport_pc,ppdev,lp
vboxnetadp 4193 0
vboxnetflt 12525 0
vboxdrv 1723671 2 vboxnetadp,vboxnetflt
binfmt_misc 6399 1
fuse 50716 1
coretemp 4325 0
uvesafb 18980 0
cn 4531 2 uvesafb
loop 11767 0
firewire_sbp2 11434 0
snd_hda_codec_realtek 235618 1
snd_hda_intel 20003 1
snd_hda_codec 54244 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 5380 1 snd_hda_codec
snd_pcm 60487 2 snd_hda_intel,snd_hda_codec
snd_seq 42737 0
snd_timer 15598 2 snd_pcm,snd_seq
snd_seq_device 4493 1 snd_seq
joydev 8459 0
tifm_7xx1 3850 0
i915 255806 2
yenta_socket 19115 2
drm_kms_helper 20337 1 i915
tifm_core 4308 1 tifm_7xx1
snd 46494 10 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
rsrc_nonstatic 7294 1 yenta_socket
drm 142071 3 i915,drm_kms_helper
i2c_algo_bit 4225 1 i915
soundcore 4598 1 snd
snd_page_alloc 6169 2 snd_hda_intel,snd_pcm
i2c_i801 7830 0
i2c_core 15787 5 i915,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
arc4 1274 2
ecb 1841 2
nsc_ircc 12091 0
psmouse 49905 0
irda 90098 1 nsc_ircc
b43 145996 0
rng_core 3006 1 b43
video 17445 1 i915
acer_wmi 12640 0
mac80211 136636 2 ath5k,b43
cfg80211 100792 4 ath5k,ath,b43,mac80211
pcspkr 1699 0
evdev 7352 18
serio_raw 3752 0
crc_ccitt 1323 1 irda
output 1692 1 video
rfkill 12964 2 acer_wmi,cfg80211
wmi 4323 1 acer_wmi
container 2389 0
battery 4998 0
ac 2192 0
button 4650 1 i915
processor 29871 3 acpi_cpufreq
ext4 287742 2
mbcache 5050 1 ext4
jbd2 66759 1 ext4
crc16 1319 1 ext4
dm_mod 53738 0
sg 24037 0
sr_mod 12602 0
usbhid 33148 0
hid 63193 1 usbhid
cdrom 29415 1 sr_mod
sd_mod 29857 4
crc_t10dif 1276 1 sd_mod
firewire_ohci 19612 0
ata_generic 3239 0
sdhci_pci 5565 0
sdhci 13918 1 sdhci_pci
ssb 38570 1 b43
uhci_hcd 18457 0
mmc_core 45270 3 b43,sdhci,ssb
firewire_core 36704 2 firewire_sbp2,firewire_ohci
thermal 11674 0
ata_piix 21092 0
ahci 32502 3
led_class 2433 4 ath5k,b43,acer_wmi,sdhci
crc_itu_t 1307 1 firewire_core
tg3 104190 0
libphy 14006 1 tg3
thermal_sys 11942 3 video,processor,thermal
ehci_hcd 31825 0
pcmcia 19474 2 b43,ssb
pcmcia_core 24070 5 yenta_socket,rsrc_nonstatic,b43,ssb,pcmcia
libata 133520 3 ata_generic,ata_piix,ahci
usbcore 122434 4 usbhid,uhci_hcd,ehci_hcd
nls_base 6377 1 usbcore
scsi_mod 126293 5 firewire_sbp2,sg,sr_mod,sd_mod,libata
Kod: Zaznacz cały
[ 9.456612] loop: module loaded
[ 9.769767] uvesafb: Intel Corporation, Intel(r)Crestline Graphics Controller, Hardware Version 0.0, OEM: Intel(r)Crestline Graphics Chip Accelerated VGA BIOS, VBE v3.0
[ 9.777896] uvesafb: VBIOS/hardware supports DDC2 transfers
[ 9.790066] uvesafb: monitor limits: vf = 60 Hz, hf = 49 kHz, clk = 71 MHz
[ 9.790183] uvesafb: scrolling: redraw
[ 9.790507] uvesafb: framebuffer at 0xd0000000, mapped to 0xffffc90021e00000, using 7616k, total 7616k
[ 9.790510] fb1: VESA VGA frame buffer device
[ 10.454154] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 11.959892] fuse init (API version 7.13)
[ 13.243720] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 13.243723] vboxdrv: Successfully done.
[ 13.243725] vboxdrv: Found 2 processor cores.
[ 13.243919] VBoxDrv: dbg - g_abExecMemory=ffffffffa05e06c0
[ 13.243944] vboxdrv: fAsync=0 offMin=0x1a7 offMax=0x1bbd
[ 13.244366] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 13.244369] vboxdrv: Successfully loaded version 3.2.10_OSE (interface 0x00140001).
[ 18.140054] lp: driver loaded but no devices found
[ 18.145423] ppdev: user-space parallel port driver
[ 18.149532] parport 0x378 (WARNING): CTR: wrote 0x0c, read 0xff
[ 18.149539] parport 0x378 (WARNING): DATA: wrote 0xaa, read 0xff
[ 18.149542] parport 0x378: You gave this address, but there is probably no parallel port there!
[ 18.149570] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 18.245320] lp0: using parport0 (interrupt-driven).
[ 22.985072] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[ 23.022548] b43 ssb0:0: firmware: requesting b43/pcm5.fw
[ 23.041742] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
[ 23.056050] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
[ 23.180084] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[ 23.301148] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 28.668970] alloc irq_desc for 29 on node -1
[ 28.668979] alloc kstat_irqs on node -1
[ 28.669012] tg3 0000:02:00.0: irq 29 for MSI/MSI-X
[ 28.704320] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 32.512060] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[ 32.609166] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 32.865549] tg3 0000:02:00.0: PME# enabled
[ 32.865577] tg3 0000:02:00.0: wake-up capability enabled by ACPI
[ 32.905261] tg3 0000:02:00.0: irq 29 for MSI/MSI-X
[ 32.940775] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 33.272089] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[ 33.369146] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 52.892112] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[ 52.892209] pci 0000:10:00.0: reg 10 32bit mmio: [0x000000-0x00ffff]
[ 53.140230] ath5k 0000:10:00.0: enabling device (0000 -> 0002)
[ 53.140252] ath5k 0000:10:00.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 53.140513] ath5k 0000:10:00.0: registered as 'phy1'
[ 53.145380] ath5k phy1: POST Failed !!!
[ 53.145413] ath5k 0000:10:00.0: PCI INT A disabled
[ 53.145858] ath5k: probe of 0000:10:00.0 failed with error -11
[ 73.945087] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[ 74.042207] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 81.852073] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[ 81.942187] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 82.176223] tg3 0000:02:00.0: irq 29 for MSI/MSI-X
[ 82.211665] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 82.536290] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[ 82.626118] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 85.152224] wlan0: direct probe to AP 00:19:e0:65:e3:1e (try 1)
[ 85.154806] wlan0: direct probe responded
[ 85.154814] wlan0: authenticate with AP 00:19:e0:65:e3:1e (try 1)
[ 85.156571] wlan0: authenticated
[ 85.156627] wlan0: associate with AP 00:19:e0:65:e3:1e (try 1)
[ 85.158874] wlan0: RX AssocResp from 00:19:e0:65:e3:1e (capab=0x431 status=0 aid=1)
[ 85.158881] wlan0: associated
[ 85.160559] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 85.160677] cfg80211: Calling CRDA for country: SA
[ 85.708428] padlock: VIA PadLock not detected.
[ 95.453016] wlan0: no IPv6 routers present
[ 289.521655] pcmcia_socket pcmcia_socket0: pccard: card ejected from slot 0
[ 314.876071] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[ 314.876156] pci 0000:10:00.0: reg 10 32bit mmio: [0x000000-0x00ffff]
[ 314.876533] ath5k 0000:10:00.0: enabling device (0000 -> 0002)
[ 314.876551] ath5k 0000:10:00.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 314.877078] ath5k 0000:10:00.0: registered as 'phy2'
[ 314.881929] ath5k phy2: POST Failed !!!
[ 314.881979] ath5k 0000:10:00.0: PCI INT A disabled
[ 314.882687] ath5k: probe of 0000:10:00.0 failed with error -11
[ 807.769767] pcmcia_socket pcmcia_socket0: pccard: card ejected from slot 0
[ 809.928064] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[ 809.928163] pci 0000:10:00.0: reg 10 32bit mmio: [0x000000-0x00ffff]
[ 809.928540] ath5k 0000:10:00.0: enabling device (0000 -> 0002)
[ 809.928559] ath5k 0000:10:00.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 809.928903] ath5k 0000:10:00.0: registered as 'phy3'
[ 809.933784] ath5k phy3: POST Failed !!!
[ 809.933832] ath5k 0000:10:00.0: PCI INT A disabled
[ 809.934722] ath5k: probe of 0000:10:00.0 failed with error -11
Kod: Zaznacz cały
*-network
description: Network controller
product: BCM4311 802.11b/g WLAN
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:04:00.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: driver=b43-pci-bridge latency=0
resources: irq:17 memory:f8000000-f8003fff
*-network UNCLAIMED
description: Ethernet controller
product: Atheros AR5001X+ Wireless Network Adapter
vendor: Atheros Communications Inc.
physical id: 1
bus info: pci@0000:10:00.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: pm cap_list
configuration: latency=168 maxlatency=28 mingnt=10
resources: memory:88000000-8800ffff
P.S.
Używam sytem operacyjny Debian Squeeze 64-bit.
W komputerze posiadam jeszcze jedną kartę bezprzewodową firmy Broadcom.