HP ML110G6 z kontrolerem Smart Array P212 - losowa niemożliwo

Jarod · Post autor: **Jarod** » 16 stycznia 2012, 22:11

Posiadam serwer HP ProLiant ML110G6 ze sprzętowym kontrolerem raid Smart Array P212 (dwa dyski 2TB w macierzy RAID1).

lscpi -k

Kod: Zaznacz cały

20:00.0 RAID bus controller: Hewlett-Packard Company Smart Array G6 controllers (rev 01)
        Subsystem: Hewlett-Packard Company Smart Array P212
00:1f.2 RAID bus controller: Intel Corporation 5 Series/3400 Series Chipset SATA RAID Controller (rev 05)
20:00.0 RAID bus controller: Hewlett-Packard Company Smart Array G6 controllers (rev 01)

Kod: Zaznacz cały

array-info -d /dev/cciss/c0d0 -A

Kod: Zaznacz cały

Unknown Controller id 0x3241103c
        Firmware revision : 3.00
        Rom revision      : 3.00
        1  logical drive configured.

        Logical drive  0 :
          Fault tolerance : RAID 1 (Mirroring)
          Size            : 1862.99 GiB (-388003664 blocks of 512 bytes)
          Status          : Logical drive is ok

Informacja o systemie

Kod: Zaznacz cały

uname -a

Kod: Zaznacz cały

Linux serwer 2.6.32-5-amd64 #1 SMP Mon Jan 9 20:49:59 UTC 2012 x86_64 GNU/Linux

Opis problemu
Podczas restartu maszyny lub wyłączeniu i ponownym włączeniu zamiast załadowania programu rozruchowego grub, pojawia się informacja:

Kod: Zaznacz cały

Loading ....

i nic się nie dzieje tzn, nie pojawia na ekranie (Ctrl + Alt + Del nie działa), serwer trzeba wyłączyć przyciskiem i włączyć jeszcze raz. Dzieje się to w losowo wybranych uruchomieniach, czasem 3x pod rząd.
W logach oczywiście nic nie ma, ponieważ jeszcze system nie zdąży się uruchomić. W biosie, w logach jest "czysto".

Podejrzewam, że powodem jest to, że pomimo tego iż dyski są w konfiguracji raid1, to grub jest tylko na pierwszym dysku, a kontroler próbuje ładować z drugiego. Niestety nie znalazłem sposobu aby grub został zainstalowany na obydwu dyskach.

Jeżeli są potrzebne jeszcze jakieś szczegóły dotyczące konfiguracji, chętnie ich udzielę.
Proszę o pomoc.

mariaczi · Post autor: **mariaczi** » 18 stycznia 2012, 08:44

Jeśli jest to w pełni sprzętowy kontroler to system widzi dyski jako jedno urządzenie. Proponowałbym popatrzeć czy nie ma aktualizacji firmware dla serwera (a tym samym kontrolera).

Jarod · Post autor: **Jarod** » 18 stycznia 2012, 15:25

Nie jestem tego pewny. Gdzieś kiedyś czytałem (postaram się to znaleźć), że przy sprzętowym raidzie grub naprawdę jest tylko na jednym dysku.

Pojawił się jeszcze jeden problem. Gdy zaczynam kopiować duże pliki z katalogu do innego katalogu i/lub na inną partycję, albo tworzę archiwum dużego katalogu, to na czas wykonywania tych operacji serwer jest praktycznie niedostępny, apache jakby wisiał (oczekiwanie na załadowanie stron). Co dziwne użycie pamięci i procka w normie, tzn. nie widać żeby coś obciążało serwer mocno (w oparciu o htop).

Jest jeden procesor:

Kod: Zaznacz cały

cat /proc/cpuinfo

Kod: Zaznacz cały

model name      : Intel(R) Xeon(R) CPU           X3470  @ 2.93GHz

Kod: Zaznacz cały

hdparm -Tt /dev/cciss/c0d0

Kod: Zaznacz cały

/dev/cciss/c0d0:
 Timing cached reads:   19848 MB in  2.00 seconds = 9934.93 MB/sec
 Timing buffered disk reads: 316 MB in  3.01 seconds = 105.06 MB/sec

Kod: Zaznacz cały

smartctl -d sat+cciss,0 -a /dev/cciss/c0d0

Kod: Zaznacz cały

smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, [URL]http://smartmontools.sourceforge.net[/URL]

=== START OF INFORMATION SECTION ===
Device Model:     WDC WD2003FYYS-02W0B0
Serial Number:    WD-WMAY03199480
Firmware Version: 01.01D01
User Capacity:    2,000,398,934,016 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Wed Jan 18 15:16:35 2012 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
Error SMART Status command failed
Please get assistance from [URL]http://smartmontools.sourceforge.net/[/URL]
Register values returned from SMART Status command are:
 ERR=...., SC=...., LL=...., LM=...., LH=...., DEV=...., STS=....
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.

General SMART Values:
Offline data collection status:  (0x84) Offline data collection activity
                                        was suspended by an interrupting command from host.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                 (30660) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.

SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        ( 255) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.
SCT capabilities:              (0x303f) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   253   253   021    Pre-fail  Always       -       7825
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       45
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       280
 10 Spin_Retry_Count        0x0032   100   253   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       44
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       43
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       1
194 Temperature_Celsius     0x0022   122   110   000    Old_age   Always       -       30
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   100   253   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Jeszcze podam vmstat (pogrubione linie - wtedy na kilka sekund włączyłem tarowanie katalogu z danymi):

Kod: Zaznacz cały

vmstat 2 100

Kod: Zaznacz cały

procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu----
 r  b   swpd   free   buff  cache   si   so    bi    bo   in   cs us sy id wa
 0  0   1252 999028 240336 14786504    0    0    53    26    5   25  1  0 98  0
 0  0   1252 993888 240336 14786504    0    0     0    24  230  174  0  0 100  0
 0  0   1252 995872 240336 14786508    0    0     0     0  192   44  0  0 100  0
 0  0   1252 994648 240336 14786508    0    0     0   152  197  207  0  0 100  0
 0  0   1252 994524 240336 14786512    0    0     0     2  112   68  0  0 100  0
 0  0   1252 995152 240336 14786512    0    0     0     0  148   57  0  0 100  0
 0  0   1252 996044 240336 14786512    0    0     0     6  167   48  0  0 100  0
 0  0   1252 998416 240336 14786512    0    0     0     0  151   42  0  0 100  0
 0  0   1252 1002896 240344 14786512    0    0     0    26  164  212  0  0 100  0
 0  0   1252 1006252 240344 14786512    0    0     0     0  144   36  0  0 100  0
 0  0   1252 1010120 240348 14786508    0    0     0    18  190  110  0  0 100  0
 0  0   1252 1011004 240348 14786516    0    0     0    26  345  198  0  0 100  0
 0  0   1252 1012872 240348 14786528    0    0     0     0  407   68  0  0 100  0
 0  0   1252 1011392 240348 14786528    0    0     0   162  115  170  0  0 100  0
 0  0   1252 1011392 240348 14786528    0    0     0     0   89   32  0  0 100  0
 0  0   1252 1010400 240348 14786528    0    0     0    16   72   94  0  0 100  0
[B] 0  1   1252  89860 240496 15680296    0    0 24860    38 1191  892  0  7 89  4
 0  1   1252  91900 240908 15674848    0    0 76564     0 1730 2017  0  2 87 11
 0  3   1252  92228 241544 15673996    0    0 37102  9522 1691 2098  0  1 83 16
 0  4   1252  91548 242224 15675756    0    0 37746     2 1474 1905  0  1 77 22
 0  3   1252  93660 242820 15672920    0    0 31406  1926 1356 1789  0  1 67 32
 0  3   1252  90492 243312 15676104    0    0 34966  1924 1499 2157  0  1 80 20
 0  2   1252  92456 243548 15678508    0    0 10028 71256 1473 1992  0  1 70 29[/B]
 0  1   1252  97696 243548 15678536    0    0     0 81324  804  583  0  0 85 15
 0  1   1252 101556 243548 15678536    0    0     0 78760  749   88  0  0 86 14
 0  2   1252 102936 243556 15678536    0    0     0 79890  768  792  0  0 85 14
 0  2   1252 102904 243560 15678540    0    0   128 83690  676  808  0  0 78 22
 0  1   1252 102564 243564 15678924    0    0    64 75542  655  893  0  0 89 11
 0  1   1252 100332 243564 15679052    0    0   116 54196  641  652  0  0 84 16
 0  2   1252 129472 243576 15679160    0    0     0 80886  724  754  0  0 86 13

Proszę o jakieś wskazówki bo nie mam pojęcia w czym problem.

mariaczi · Post autor: **mariaczi** » 18 stycznia 2012, 19:19

Jarod pisze:Nie jestem tego pewny. Gdzieś kiedyś czytałem (postaram się to znaleźć), że przy sprzętowym raidzie grub naprawdę jest tylko na jednym dysku.

Wydaje mi się to nieprawdopodobne, a to z racji tego, że sprzętowy kontroler RAID wystawia do systemu operacyjnego już gotową macierz - jedno urządzenie.
Co "mówi" dmesg zaraz po uruchomieniu systemu?

Jarod · Post autor: **Jarod** » 02 lutego 2012, 11:23

mariaczi pisze: Co "mówi" dmesg zaraz po uruchomieniu systemu?

Mała poprawka. Uruchamiam serwer, pojawia się grub i przy próbie ładowania jądra czasami zawiesza się w momencie wyswietlania komunikatu:

Kod: Zaznacz cały

[    0.720532] i8042.c: No controller found.

Jako ciekawostkę podam, że jak się system ładuje poprawnie powyższy komunikat także jest wyświetlany.

Poniżej cały wynik polecenia:

Kod: Zaznacz cały

dmesg

do momentu zawieszenia systemu i kila wierszy dalej:

Kod: Zaznacz cały

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-41) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Jan 16 16:22:28 UTC 2012
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=dedc0788-8411-43b4-acd7-63cacdd308cc ro quiet
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 0000000000097c00 (usable)
[    0.000000]  BIOS-e820: 0000000000097c00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000bf7a0000 (usable)
[    0.000000]  BIOS-e820: 00000000bf7a0000 - 00000000bf7ad000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000bf7ad000 - 00000000bf7ae000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000bf7ae000 - 00000000bf7ff000 (reserved)
[    0.000000]  BIOS-e820: 00000000bf800000 - 00000000c0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000240000000 (usable)
[    0.000000] DMI 2.6 present.
[    0.000000] last_pfn = 0x240000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   1 base 000000000 mask E00000000 write-back
[    0.000000]   2 base 200000000 mask FC0000000 write-back
[    0.000000]   3 base 0BF800000 mask FFF800000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xbf7a0 max_arch_pfn = 0x400000000
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] init_memory_mapping: 0000000000000000-00000000bf7a0000
[    0.000000]  0000000000 - 00bf600000 page 2M
[    0.000000]  00bf600000 - 00bf7a0000 page 4k
[    0.000000] kernel direct mapping tables up to bf7a0000 @ 8000-d000
[    0.000000] init_memory_mapping: 0000000100000000-0000000240000000
[    0.000000]  0100000000 - 0240000000 page 2M
[    0.000000] kernel direct mapping tables up to 240000000 @ b000-15000
[    0.000000] RAMDISK: 3770f000 - 37fef300
[    0.000000] ACPI: RSDP 00000000000f6de0 00024 (v02 PTLTD )
[    0.000000] ACPI: XSDT 00000000bf7a8407 00094 (v01 HP     ProLiant 06040000  LTP 00000000)
[    0.000000] ACPI: FACP 00000000bf7ac6ad 000F4 (v03 HP     LYNNFLD  06040000 PTL  00000002)
[    0.000000] ACPI: DSDT 00000000bf7a849b 0418E (v01 HP     ProLiant 06040000 MSFT 03000000)
[    0.000000] ACPI: FACS 00000000bf7adfc0 00040
[    0.000000] ACPI: TCPA 00000000bf7ac7a1 00032 (v01 HP     ProLiant 06040000 LOHR 0000005A)
[    0.000000] ACPI: SSDT 00000000bf7a03ab 01488 (v01  INTEL PPM RCM  80000001 INTL 20061109)
[    0.000000] ACPI: SPMI 00000000bf7ac7f7 00040 (v05 HP     ProLiant 06040000 PTL  00000001)
[    0.000000] ACPI: EINJ 00000000bf7ac837 001B0 (v01 HP     ProLiant 06040000 PTL  00000001)
[    0.000000] ACPI: HEST 00000000bf7ac9e7 00128 (v01 HP     ProLiant 06040000 PTL  00000001)
[    0.000000] ACPI: BERT 00000000bf7acb0f 00030 (v01 HP     ProLiant 06040000 PTL  00000001)
[    0.000000] ACPI: SSDT 00000000bf7acb3f 000E1 (v01 HP     ProLiant 06040000 INTL 20050624)
[    0.000000] ACPI: ERST 00000000bf7acc20 00270 (v01 HP     ProLiant 06040000 PTL  00000001)
[    0.000000] ACPI: APIC 00000000bf7ace90 00084 (v01 HP     ProLiant 06040000  LTP 00000000)
[    0.000000] ACPI: MCFG 00000000bf7acf14 0003C (v01 HP     ProLiant 06040000  LTP 00000000)
[    0.000000] ACPI: HPET 00000000bf7acf50 00038 (v01 PTLTD  HPETTBL  06040000  LTP 00000001)
[    0.000000] ACPI: BOOT 00000000bf7acf88 00028 (v01 HP     ProLiant 06040000  LTP 00000001)
[    0.000000] ACPI: SPCR 00000000bf7acfb0 00050 (v01 HP     ProLiant 06040000 PTL  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000240000000
[    0.000000] Bootmem setup node 0 0000000000000000-0000000240000000
[    0.000000]   NODE_DATA [0000000000010000 - 0000000000017fff]
[    0.000000]   bootmap [0000000000018000 -  000000000005ffff] pages 48
[    0.000000] (8 early reservations) ==> bootmem [0000000000 - 0240000000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
[    0.000000]   #2 [0001000000 - 00016d95c4]    TEXT DATA BSS ==> [0001000000 - 00016d95c4]
[    0.000000]   #3 [003770f000 - 0037fef300]          RAMDISK ==> [003770f000 - 0037fef300]
[    0.000000]   #4 [0000097c00 - 0000100000]    BIOS reserved ==> [0000097c00 - 0000100000]
[    0.000000]   #5 [00016da000 - 00016da180]              BRK ==> [00016da000 - 00016da180]
[    0.000000]   #6 [0000008000 - 000000b000]          PGTABLE ==> [0000008000 - 000000b000]
[    0.000000]   #7 [000000b000 - 0000010000]          PGTABLE ==> [000000b000 - 0000010000]
[    0.000000] found SMP MP-table at [ffff8800000f6e10] f6e10
[    0.000000]  [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880001800000-ffff8800087fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00240000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00000097
[    0.000000]     0: 0x00000100 -> 0x000bf7a0
[    0.000000]     0: 0x00100000 -> 0x00240000
[    0.000000] On node 0 totalpages: 2094903
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 115 pages reserved
[    0.000000]   DMA zone: 3820 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 765912 pages, LIFO batch:31
[    0.000000]   Normal zone: 17920 pages used for memmap
[    0.000000]   Normal zone: 1292800 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 0000000000097000 - 0000000000098000
[    0.000000] PM: Registered nosave memory: 0000000000098000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[    0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000bf7a0000 - 00000000bf7ad000
[    0.000000] PM: Registered nosave memory: 00000000bf7ad000 - 00000000bf7ae000
[    0.000000] PM: Registered nosave memory: 00000000bf7ae000 - 00000000bf7ff000
[    0.000000] PM: Registered nosave memory: 00000000bf7ff000 - 00000000bf800000
[    0.000000] PM: Registered nosave memory: 00000000bf800000 - 00000000c0000000
[    0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[    0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[    0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 30 pages/cpu @ffff880008a00000 s90328 r8192 d24360 u524288
[    0.000000] pcpu-alloc: s90328 r8192 d24360 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2062532
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=dedc0788-8411-43b4-acd7-63cacdd308cc ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.000000] Placing 64MB software IO TLB between ffff880008b9e000 - ffff88000cb9e000
[    0.000000] software IO TLB at phys 0x8b9e000 - 0xcb9e000
[    0.000000] Memory: 8181928k/9437184k available (3083k kernel code, 1057572k absent, 197684k reserved, 2048k data, 592k init)
[    0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:4352 nr_irqs:440
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.004000] Detected 2394.040 MHz processor.
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.08 BogoMIPS (lpj=9576160)
[    0.000014] Security Framework initialized
[    0.000017] SELinux:  Disabled at boot.
[    0.000483] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.002001] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.002728] Mount-cache hash table entries: 256
[    0.002816] Initializing cgroup subsys ns
[    0.002818] Initializing cgroup subsys cpuacct
[    0.002821] Initializing cgroup subsys devices
[    0.002823] Initializing cgroup subsys freezer
[    0.002824] Initializing cgroup subsys net_cls
[    0.002839] CPU: Physical Processor ID: 0
[    0.002840] CPU: Processor Core ID: 0
[    0.002843] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.002844] CPU: L2 cache: 256K
[    0.002845] CPU: L3 cache: 8192K
[    0.002848] CPU 0/0x0 -> Node 0
[    0.002850] mce: CPU supports 9 MCE banks
[    0.002858] CPU0: Thermal monitoring enabled (TM1)
[    0.002861] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 CMCI:8
[    0.002867] using mwait in idle threads.
[    0.002869] Performance Events: Nehalem/Corei7 events, Intel PMU driver.
[    0.002872] ... version:                3
[    0.002873] ... bit width:              48
[    0.002874] ... generic registers:      4
[    0.002875] ... value mask:             0000ffffffffffff
[    0.002877] ... max period:             000000007fffffff
[    0.002878] ... fixed-purpose events:   3
[    0.002879] ... event mask:             000000070000000f
[    0.003600] ACPI: Core revision 20090903
[    0.015574] Setting APIC routing to flat
[    0.015901] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.055517] CPU0: Intel(R) Xeon(R) CPU           X3430  @ 2.40GHz stepping 05
[    0.160407] Booting processor 1 APIC 0x2 ip 0x6000
[    0.170950] Initializing CPU#1
[    0.248168] CPU: Physical Processor ID: 0
[    0.248169] CPU: Processor Core ID: 1
[    0.248171] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.248172] CPU: L2 cache: 256K
[    0.248173] CPU: L3 cache: 8192K
[    0.248175] CPU 1/0x2 -> Node 0
[    0.248184] CPU1: Thermal monitoring enabled (TM1)
[    0.248187] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[    0.248284] CPU1: Intel(R) Xeon(R) CPU           X3430  @ 2.40GHz stepping 05
[    0.248291] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.268327] Booting processor 2 APIC 0x4 ip 0x6000
[    0.278590] Initializing CPU#2
[    0.355975] CPU: Physical Processor ID: 0
[    0.355976] CPU: Processor Core ID: 2
[    0.355978] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.355980] CPU: L2 cache: 256K
[    0.355981] CPU: L3 cache: 8192K
[    0.355983] CPU 2/0x4 -> Node 0
[    0.355992] CPU2: Thermal monitoring enabled (TM1)
[    0.355995] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[    0.356013] CPU2: Intel(R) Xeon(R) CPU           X3430  @ 2.40GHz stepping 05
[    0.356019] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[    0.376053] Booting processor 3 APIC 0x6 ip 0x6000
[    0.386316] Initializing CPU#3
[    0.463783] CPU: Physical Processor ID: 0
[    0.463784] CPU: Processor Core ID: 3
[    0.463786] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.463787] CPU: L2 cache: 256K
[    0.463788] CPU: L3 cache: 8192K
[    0.463790] CPU 3/0x6 -> Node 0
[    0.463800] CPU3: Thermal monitoring enabled (TM1)
[    0.463802] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8
[    0.463839] CPU3: Intel(R) Xeon(R) CPU           X3430  @ 2.40GHz stepping 05
[    0.463845] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[    0.483828] Brought up 4 CPUs
[    0.483830] Total of 4 processors activated (19151.35 BogoMIPS).
[    0.485454] CPU0 attaching sched-domain:
[    0.485457]  domain 0: span 0-3 level MC
[    0.485459]   groups: group ffff880008a0fbf0 cpus 0 group ffff880008a8fbf0 cpus 1 group ffff880008b0fbf0 cpus 2 group ffff880008b8fbf0 cpus 3
[    0.485466] CPU1 attaching sched-domain:
[    0.485468]  domain 0: span 0-3 level MC
[    0.485469]   groups: group ffff880008a8fbf0 cpus 1 group ffff880008b0fbf0 cpus 2 group ffff880008b8fbf0 cpus 3 group ffff880008a0fbf0 cpus 0
[    0.485475] CPU2 attaching sched-domain:
[    0.485476]  domain 0: span 0-3 level MC
[    0.485477]   groups: group ffff880008b0fbf0 cpus 2 group ffff880008b8fbf0 cpus 3 group ffff880008a0fbf0 cpus 0 group ffff880008a8fbf0 cpus 1
[    0.485483] CPU3 attaching sched-domain:
[    0.485484]  domain 0: span 0-3 level MC
[    0.485486]   groups: group ffff880008b8fbf0 cpus 3 group ffff880008a0fbf0 cpus 0 group ffff880008a8fbf0 cpus 1 group ffff880008b0fbf0 cpus 2
[    0.485652] devtmpfs: initialized
[    0.489458] regulator: core version 0.5
[    0.489492] NET: Registered protocol family 16
[    0.489556] ACPI: bus type pci registered
[    0.489607] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 47
[    0.489609] PCI: MCFG area at e0000000 reserved in E820
[    0.490827] PCI: Using MMCONFIG at e0000000 - e2ffffff
[    0.490829] PCI: Using configuration type 1 for base access
[    0.491232] bio: create slab <bio-0> at 0
[    0.491636] ACPI: EC: Look up EC in DSDT
[    0.492279] ACPI Warning for \_SB_._OSC: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006)
[    0.492284] \_SB_:_OSC evaluation returned wrong type
[    0.492285] _OSC request data:1 7
[    0.493296] ACPI: Interpreter enabled
[    0.493298] ACPI: (supports S0 S4 S5)
[    0.493308] ACPI: Using IOAPIC for interrupt routing
[    0.495904] ACPI: No dock devices found.
[    0.496624] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.496726] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.496729] pci 0000:00:03.0: PME# disabled
[    0.496970] pci 0000:00:1a.0: reg 10 32bit mmio: [0xdf202000-0xdf2023ff]
[    0.497018] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.497022] pci 0000:00:1a.0: PME# disabled
[    0.497078] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.497081] pci 0000:00:1c.0: PME# disabled
[    0.497137] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.497140] pci 0000:00:1c.1: PME# disabled
[    0.497195] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.497198] pci 0000:00:1c.2: PME# disabled
[    0.497252] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.497255] pci 0000:00:1c.3: PME# disabled
[    0.497310] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.497313] pci 0000:00:1c.4: PME# disabled
[    0.497361] pci 0000:00:1d.0: reg 10 32bit mmio: [0xdf202400-0xdf2027ff]
[    0.497409] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.497412] pci 0000:00:1d.0: PME# disabled
[    0.497576] pci 0000:00:1f.2: reg 10 io port: [0x1830-0x1837]
[    0.497581] pci 0000:00:1f.2: reg 14 io port: [0x1824-0x1827]
[    0.497586] pci 0000:00:1f.2: reg 18 io port: [0x1828-0x182f]
[    0.497590] pci 0000:00:1f.2: reg 1c io port: [0x1820-0x1823]
[    0.497595] pci 0000:00:1f.2: reg 20 io port: [0x1800-0x181f]
[    0.497600] pci 0000:00:1f.2: reg 24 32bit mmio: [0xdf201000-0xdf2017ff]
[    0.497627] pci 0000:00:1f.2: PME# supported from D3hot
[    0.497630] pci 0000:00:1f.2: PME# disabled
[    0.497654] pci 0000:00:1f.3: reg 10 64bit mmio: [0xdf202800-0xdf2028ff]
[    0.497666] pci 0000:00:1f.3: reg 20 io port: [0x1840-0x185f]
[    0.497763] pci 0000:10:00.0: reg 10 32bit mmio: [0xde920000-0xde93ffff]
[    0.497774] pci 0000:10:00.0: reg 14 32bit mmio: [0xde900000-0xde91ffff]
[    0.497784] pci 0000:10:00.0: reg 18 io port: [0x2000-0x201f]
[    0.497820] pci 0000:10:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[    0.497867] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold
[    0.497873] pci 0000:10:00.0: PME# disabled
[    0.497954] pci 0000:10:00.1: reg 10 32bit mmio: [0xde960000-0xde97ffff]
[    0.497964] pci 0000:10:00.1: reg 14 32bit mmio: [0xde940000-0xde95ffff]
[    0.497974] pci 0000:10:00.1: reg 18 io port: [0x2020-0x203f]
[    0.498010] pci 0000:10:00.1: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[    0.498057] pci 0000:10:00.1: PME# supported from D0 D3hot D3cold
[    0.498063] pci 0000:10:00.1: PME# disabled
[    0.498113] pci 0000:10:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.498201] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
[    0.498205] pci 0000:00:1c.0: bridge 32bit mmio: [0xde900000-0xde9fffff]
[    0.498241] pci 0000:00:1c.1: bridge io port: [0x00-0xfff]
[    0.498290] pci 0000:1c:00.0: reg 10 32bit mmio pref: [0xdd000000-0xddffffff]
[    0.498299] pci 0000:1c:00.0: reg 14 32bit mmio: [0xde800000-0xde803fff]
[    0.498308] pci 0000:1c:00.0: reg 18 32bit mmio: [0xde000000-0xde7fffff]
[    0.498338] pci 0000:1c:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[    0.498401] pci 0000:1c:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.498458] pci 0000:00:1c.2: bridge 32bit mmio: [0xde000000-0xde8fffff]
[    0.498463] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xdd000000-0xddffffff]
[    0.498525] pci 0000:1e:00.0: reg 10 64bit mmio: [0xdea00000-0xdea0ffff]
[    0.498598] pci 0000:1e:00.0: PME# supported from D3hot D3cold
[    0.498602] pci 0000:1e:00.0: PME# disabled
[    0.503799] pci 0000:00:1c.3: bridge 32bit mmio: [0xdea00000-0xdeafffff]
[    0.503850] pci 0000:20:00.0: reg 10 64bit mmio: [0xdec00000-0xdeffffff]
[    0.503863] pci 0000:20:00.0: reg 18 64bit mmio: [0xdeb00000-0xdeb00fff]
[    0.503870] pci 0000:20:00.0: reg 20 io port: [0x3000-0x30ff]
[    0.503883] pci 0000:20:00.0: reg 30 32bit mmio pref: [0x000000-0x07ffff]
[    0.503917] pci 0000:20:00.0: supports D1
[    0.503918] pci 0000:20:00.0: PME# supported from D0
[    0.503922] pci 0000:20:00.0: PME# disabled
[    0.511761] pci 0000:00:1c.4: bridge io port: [0x3000-0x3fff]
[    0.511765] pci 0000:00:1c.4: bridge 32bit mmio: [0xdeb00000-0xdeffffff]
[    0.511809] pci 0000:00:1e.0: transparent bridge
[    0.511841] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.512194] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[    0.512255] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[    0.512308] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[    0.512361] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[    0.512413] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[    0.512466] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[    0.512535] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.517061] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
[    0.517137] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 14 15)
[    0.517210] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
[    0.517284] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15)
[    0.517358] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[    0.517432] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
[    0.517506] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[    0.517580] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 *7 10 11 14 15)
[    0.517658] vgaarb: device added: PCI:0000:1c:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.517661] vgaarb: loaded
[    0.517696] PCI: Using ACPI for IRQ routing
[    0.517699] pci 0000:00:1c.1: BAR 13: can't allocate resource
[    0.517824]   alloc irq_desc for 24 on node -1
[    0.517826]   alloc kstat_irqs on node -1
[    0.517831]   alloc irq_desc for 25 on node -1
[    0.517832]   alloc kstat_irqs on node -1
[    0.517835]   alloc irq_desc for 26 on node -1
[    0.517837]   alloc kstat_irqs on node -1
[    0.517840]   alloc irq_desc for 27 on node -1
[    0.517841]   alloc kstat_irqs on node -1
[    0.517843] HPET: 8 timers in total, 4 timers will be used for per-cpu timer
[    0.517850] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 0, 0
[    0.517854] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.523684] hpet: hpet2 irq 24 for MSI
[    0.523825] hpet: hpet3 irq 25 for MSI
[    0.527743] hpet: hpet4 irq 26 for MSI
[    0.531755] hpet: hpet5 irq 27 for MSI
[    0.531771] Switching to clocksource tsc
[    0.532615] pnp: PnP ACPI init
[    0.532621] ACPI: bus type pnp registered
[    0.534419] pnp: PnP ACPI: found 10 devices
[    0.534420] ACPI: ACPI bus type pnp unregistered
[    0.534427] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[    0.534430] system 00:01: ioport range 0x800-0x80f has been reserved
[    0.534432] system 00:01: ioport range 0x1000-0x107f has been reserved
[    0.534434] system 00:01: ioport range 0x1180-0x11bf has been reserved
[    0.534436] system 00:01: ioport range 0xfe00-0xfe00 has been reserved
[    0.534439] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[    0.534441] system 00:01: iomem range 0xfe710000-0xfe710fff has been reserved
[    0.534443] system 00:01: iomem range 0xfe711000-0xfe711fff has been reserved
[    0.534445] system 00:01: iomem range 0xfe713000-0xfe713fff has been reserved
[    0.534447] system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved
[    0.534450] system 00:01: iomem range 0xfee00000-0xfeefffff could not be reserved
[    0.534452] system 00:01: iomem range 0xfe800000-0xfe9fffff has been reserved
[    0.534454] system 00:01: iomem range 0xfeb00000-0xfebfffff has been reserved
[    0.534457] system 00:01: iomem range 0xfed20000-0xfed44fff has been reserved
[    0.534459] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
[    0.539111] pci 0000:00:03.0: PCI bridge, secondary bus 0000:01
[    0.539113] pci 0000:00:03.0:   IO window: disabled
[    0.539116] pci 0000:00:03.0:   MEM window: disabled
[    0.539118] pci 0000:00:03.0:   PREFETCH window: disabled
[    0.539123] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:10
[    0.539125] pci 0000:00:1c.0:   IO window: 0x2000-0x2fff
[    0.539129] pci 0000:00:1c.0:   MEM window: 0xde900000-0xde9fffff
[    0.539133] pci 0000:00:1c.0:   PREFETCH window: 0xc0000000-0xc01fffff
[    0.539138] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:1a
[    0.539140] pci 0000:00:1c.1:   IO window: 0x4000-0x4fff
[    0.539144] pci 0000:00:1c.1:   MEM window: 0xc0200000-0xc03fffff
[    0.539147] pci 0000:00:1c.1:   PREFETCH window: 0x000000c0400000-0x000000c05fffff
[    0.539152] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:1c
[    0.539155] pci 0000:00:1c.2:   IO window: 0x5000-0x5fff
[    0.539158] pci 0000:00:1c.2:   MEM window: 0xde000000-0xde8fffff
[    0.539162] pci 0000:00:1c.2:   PREFETCH window: 0x000000dd000000-0x000000ddffffff
[    0.539167] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:1e
[    0.539169] pci 0000:00:1c.3:   IO window: 0x6000-0x6fff
[    0.539173] pci 0000:00:1c.3:   MEM window: 0xdea00000-0xdeafffff
[    0.539176] pci 0000:00:1c.3:   PREFETCH window: 0x000000c0600000-0x000000c07fffff
[    0.539181] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:20
[    0.539183] pci 0000:00:1c.4:   IO window: 0x3000-0x3fff
[    0.539187] pci 0000:00:1c.4:   MEM window: 0xdeb00000-0xdeffffff
[    0.539190] pci 0000:00:1c.4:   PREFETCH window: 0xc0800000-0xc09fffff
[    0.539195] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:30
[    0.539196] pci 0000:00:1e.0:   IO window: disabled
[    0.539200] pci 0000:00:1e.0:   MEM window: disabled
[    0.539202] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.539212]   alloc irq_desc for 16 on node -1
[    0.539213]   alloc kstat_irqs on node -1
[    0.539217] pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.539220] pci 0000:00:03.0: setting latency timer to 64
[    0.539228]   alloc irq_desc for 17 on node -1
[    0.539229]   alloc kstat_irqs on node -1
[    0.539232] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.539235] pci 0000:00:1c.0: setting latency timer to 64
[    0.539241] pci 0000:00:1c.1: enabling device (0000 -> 0003)
[    0.539244] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.539248] pci 0000:00:1c.1: setting latency timer to 64
[    0.539254]   alloc irq_desc for 18 on node -1
[    0.539255]   alloc kstat_irqs on node -1
[    0.539259] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.539262] pci 0000:00:1c.2: setting latency timer to 64
[    0.539268]   alloc irq_desc for 19 on node -1
[    0.539270]   alloc kstat_irqs on node -1
[    0.539273] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.539276] pci 0000:00:1c.3: setting latency timer to 64
[    0.539282] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.539285] pci 0000:00:1c.4: setting latency timer to 64
[    0.539290] pci 0000:00:1e.0: setting latency timer to 64
[    0.539293] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.539295] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    0.539297] pci_bus 0000:10: resource 0 io:  [0x2000-0x2fff]
[    0.539298] pci_bus 0000:10: resource 1 mem: [0xde900000-0xde9fffff]
[    0.539300] pci_bus 0000:10: resource 2 pref mem [0xc0000000-0xc01fffff]
[    0.539302] pci_bus 0000:1a: resource 0 io:  [0x4000-0x4fff]
[    0.539304] pci_bus 0000:1a: resource 1 mem: [0xc0200000-0xc03fffff]
[    0.539305] pci_bus 0000:1a: resource 2 pref mem [0xc0400000-0xc05fffff]
[    0.539307] pci_bus 0000:1c: resource 0 io:  [0x5000-0x5fff]
[    0.539309] pci_bus 0000:1c: resource 1 mem: [0xde000000-0xde8fffff]
[    0.539311] pci_bus 0000:1c: resource 2 pref mem [0xdd000000-0xddffffff]
[    0.539312] pci_bus 0000:1e: resource 0 io:  [0x6000-0x6fff]
[    0.539314] pci_bus 0000:1e: resource 1 mem: [0xdea00000-0xdeafffff]
[    0.539316] pci_bus 0000:1e: resource 2 pref mem [0xc0600000-0xc07fffff]
[    0.539317] pci_bus 0000:20: resource 0 io:  [0x3000-0x3fff]
[    0.539319] pci_bus 0000:20: resource 1 mem: [0xdeb00000-0xdeffffff]
[    0.539321] pci_bus 0000:20: resource 2 pref mem [0xc0800000-0xc09fffff]
[    0.539323] pci_bus 0000:30: resource 3 io:  [0x00-0xffff]
[    0.539324] pci_bus 0000:30: resource 4 mem: [0x000000-0xffffffffffffffff]
[    0.539342] NET: Registered protocol family 2
[    0.539516] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.540330] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.542751] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.543045] TCP: Hash tables configured (established 524288 bind 65536)
[    0.543047] TCP reno registered
[    0.543113] NET: Registered protocol family 1
[    0.543188] pci 0000:1c:00.0: Boot video device
[    0.543224] Unpacking initramfs...
[    0.710422] Freeing initrd memory: 9088k freed
[    0.711735] Simple Boot Flag at 0x38 set to 0x1
[    0.712048] audit: initializing netlink socket (disabled)
[    0.712056] type=2000 audit(1328180955.560:1): initialized
[    0.716264] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.717242] VFS: Disk quotas dquot_6.5.2
[    0.717279] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.717335] msgmni has been set to 15998
[    0.717473] alg: No test for stdrng (krng)
[    0.717509] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.717511] io scheduler noop registered
[    0.717512] io scheduler anticipatory registered
[    0.717514] io scheduler deadline registered
[    0.717553] io scheduler cfq registered (default)
[    0.717640]   alloc irq_desc for 28 on node -1
[    0.717642]   alloc kstat_irqs on node -1
[    0.717649] pcieport 0000:00:03.0: irq 28 for MSI/MSI-X
[    0.717654] pcieport 0000:00:03.0: setting latency timer to 64
[    0.717735]   alloc irq_desc for 29 on node -1
[    0.717736]   alloc kstat_irqs on node -1
[    0.717741] pcieport 0000:00:1c.0: irq 29 for MSI/MSI-X
[    0.717748] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.717833]   alloc irq_desc for 30 on node -1
[    0.717835]   alloc kstat_irqs on node -1
[    0.717840] pcieport 0000:00:1c.1: irq 30 for MSI/MSI-X
[    0.717846] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.717930]   alloc irq_desc for 31 on node -1
[    0.717931]   alloc kstat_irqs on node -1
[    0.717938] pcieport 0000:00:1c.2: irq 31 for MSI/MSI-X
[    0.717944] pcieport 0000:00:1c.2: setting latency timer to 64
[    0.718032]   alloc irq_desc for 32 on node -1
[    0.718033]   alloc kstat_irqs on node -1
[    0.718038] pcieport 0000:00:1c.3: irq 32 for MSI/MSI-X
[    0.718044] pcieport 0000:00:1c.3: setting latency timer to 64
[    0.718129]   alloc irq_desc for 33 on node -1
[    0.718130]   alloc kstat_irqs on node -1
[    0.718135] pcieport 0000:00:1c.4: irq 33 for MSI/MSI-X
[    0.718142] pcieport 0000:00:1c.4: setting latency timer to 64
[    0.718204] aer 0000:00:03.:p cie02: AER service couldn't init device: no _OSC support
[    0.719178] Linux agpgart interface v0.103
[    0.719204] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.719301] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.719550] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.719641] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    0.719680] PNP: No PS/2 controller found. Probing ports directly.
[B][    0.720532] i8042.c: No controller found.[/B]
[    0.720631] mice: PS/2 mouse device common for all mice
[    0.720654] rtc_cmos 00:05: RTC can wake from S4
[    0.720677] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.720702] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.720711] cpuidle: using governor ladder
[    0.720712] cpuidle: using governor menu
[    0.720715] No iBFT detected.
[    0.720938] TCP cubic registered
[    0.721013] NET: Registered protocol family 10
[    0.721531] Mobile IPv6
[    0.721533] NET: Registered protocol family 17
[    0.721581] PM: Resume from disk failed.
[    0.721586] registered taskstats version 1
[    0.722016] rtc_cmos 00:05: setting system clock to 2012-02-02 11:09:15 UTC (1328180955)
[    0.722052] Initalizing network drop monitor service
[    0.722072] Freeing unused kernel memory: 592k freed
[    0.722160] Write protecting the kernel read-only data: 4240k
[    0.731829] udev[76]: starting version 164
[    0.764518] SCSI subsystem initialized

HP ML110G6 z kontrolerem Smart Array P212 - losowa niemożliwo

HP ML110G6 z kontrolerem Smart Array P212 - losowa niemożliwość uruchomienia systemu