[+] Mysz A4Tech X750 Snake Fire nie uruchamia si

gaco504 · Post autor: **gaco504** » 18 stycznia 2011, 07:57

Witam!
Cały czas próbuje zdobyć jakieś informacje o tym, dlaczego ta myszka nie włącza się na Debianie, chociażby w chwili włączenia X serwera. Czasami muszę wielokrotnie uruchamiać system, aby mysz zaskoczyła - jest to bardzo uciążliwe i niewygodne. Dzisiaj wydłubałem takie coś:

Kod: Zaznacz cały

(EE) A4TECH USB Device: failed to initialize for relative axes.

Takich linijek jest o wiele więcej i następują one kolejno po sobie, zakładam, że każda z tych linijek to próba podłączenia urządzenia USB - mojej myszy. Może jest jakieś polecenie albo skrypt, dzięki któremu urządzenie byłoby zawsze wykrywane przy wczytaniu pulpitu?

Edycja:
Problem z wykrywaniem myszki jest chyba rozwiązany, wystarczyło postawić gwiazdki w brakujących miejscach przy Dbus w programie sysv-rc-conf. Teraz mysz jest wykrywana od razu po ekranie biosu i działa za każdym uruchomieniem komputera. Spotkał się ktoś z opóźnieniami podczas przenoszenia okien? Jest na to jakaś rada? Na innej myszy tego nie ma.

diabolic3 · Post autor: **diabolic3** » 27 maja 2011, 23:54

Podepnę się pod temat. Otóż mam podobną sytuację z podobną myszką, z tym, że ona powoduje zamarzanie kursora. W logach z kdm i Xorga występuje taki sam błąd jak u kolegi gaco504. Dodam, że mysz działa bez zarzutu pod windowsem. Na stanie mam też drugą starą myszkę A4techa, i ona nie powoduje takich problemów. Zwiechy występują różnie czasami zaraz na początku, czasami trochę później, a czasami gdy są podpięte obie myszki nie występują w ogóle, zaś po wystąpieniu zamrożenie jak się podłączy starą mysz to kursor normalnie już chodzi. Już normalnie mi ręce od niej opadają bo to trochę wkurzające jest że trzeba się ze starą myszką męczyć.

fnmirk · Post autor: **fnmirk** » 28 maja 2011, 00:12

Jaki sterownik jest wykorzystywany do obsługi myszy?

diabolic3 · Post autor: **diabolic3** » 28 maja 2011, 00:22

Próbowałem zarówno mice jak i evdev. Efekt ten sam

fnmirk · Post autor: **fnmirk** » 28 maja 2011, 00:38

Wspomniane sterowniki inaczej się konfiguruje. Czy masz w systemie zainstalowany i skonfigurowany pakiet hal?

diabolic3 · Post autor: **diabolic3** » 28 maja 2011, 00:49

Hal zainstalowany z racji używania kde

fnmirk · Post autor: **fnmirk** » 28 maja 2011, 14:47

Nie wiem co jest powodem takiego zachowania, ale przedstaw:

Kod: Zaznacz cały

dpkg -l | grep xserver

i plik:

Kod: Zaznacz cały

/var/log/Xorg.0.log

diabolic3 · Post autor: **diabolic3** » 28 maja 2011, 15:49

Kod: Zaznacz cały

ii  x11-xserver-utils                     7.6+2                             X server utilities
ii  xserver-common                        2:1.10.1-2                        common files used by various X servers
ii  xserver-xorg                          1:7.6+6                           the X.Org X server
ii  xserver-xorg-core                     2:1.10.1-2                        Xorg X server - core server
ii  xserver-xorg-input-all                1:7.6+6                           the X.Org X server -- input driver metapackage
ii  xserver-xorg-input-evdev              1:2.6.0-2+b1                      X.Org X server -- evdev input driver
ii  xserver-xorg-input-mouse              1:1.7.0-2+b1                      X.Org X server -- mouse input driver
ii  xserver-xorg-input-synaptics          1.4.0-1+b1                        Synaptics TouchPad driver for X.Org server
ii  xserver-xorg-input-wacom              0.10.10+20110203-1+b1             X.Org X server -- Wacom input driver
ii  xserver-xorg-video-all                1:7.6+6                           the X.Org X server -- output driver metapackage
ii  xserver-xorg-video-apm                1:1.2.3-2+b1                      X.Org X server -- APM display driver
ii  xserver-xorg-video-ark                1:0.7.3-2+b1                      X.Org X server -- ark display driver
ii  xserver-xorg-video-ati                1:6.14.1-1+b1                     X.Org X server -- AMD/ATI display driver wrapper
ii  xserver-xorg-video-chips              1:1.2.4-1+b1                      X.Org X server -- Chips display driver
ii  xserver-xorg-video-cirrus             1:1.3.2-4+b1                      X.Org X server -- Cirrus display driver
ii  xserver-xorg-video-fbdev              1:0.4.2-4+b1                      X.Org X server -- fbdev display driver
ii  xserver-xorg-video-geode              2.11.12-1+b1                      X.Org X server -- Geode GX2/LX display driver
ii  xserver-xorg-video-i128               1:1.3.4-2+b1                      X.Org X server -- i128 display driver
ii  xserver-xorg-video-i740               1:1.3.2-4+b1                      X.Org X server -- i740 display driver
ii  xserver-xorg-video-intel              2:2.15.0-3                        X.Org X server -- Intel i8xx, i9xx display driver
ii  xserver-xorg-video-mach64             6.9.0-1                           X.Org X server -- ATI Mach64 display driver
ii  xserver-xorg-video-mga                1:1.4.13.dfsg-3+b1                X.Org X server -- MGA display driver
ii  xserver-xorg-video-neomagic           1:1.2.5-2+b1                      X.Org X server -- Neomagic display driver
ii  xserver-xorg-video-nouveau            1:0.0.16+git20110411+8378443-1+b1 X.Org X server -- Nouveau display driver (experimental)
ii  xserver-xorg-video-openchrome         1:0.2.904+svn920-1                X.Org X server -- VIA display driver
ii  xserver-xorg-video-r128               6.8.1-5+b1                        X.Org X server -- ATI r128 display driver
ii  xserver-xorg-video-radeon             1:6.14.1-1+b1                     X.Org X server -- AMD/ATI Radeon display driver
ii  xserver-xorg-video-rendition          1:4.2.4-2+b1                      X.Org X server -- Rendition display driver
ii  xserver-xorg-video-s3                 1:0.6.3-4+b1                      X.Org X server -- legacy S3 display driver
ii  xserver-xorg-video-s3virge            1:1.10.4-4+b1                     X.Org X server -- S3 ViRGE display driver
ii  xserver-xorg-video-savage             1:2.3.2-3+b1                      X.Org X server -- Savage display driver
ii  xserver-xorg-video-siliconmotion      1:1.7.5-1+b1                      X.Org X server -- SiliconMotion display driver
ii  xserver-xorg-video-sis                1:0.10.3-3+b1                     X.Org X server -- SiS display driver
ii  xserver-xorg-video-sisusb             1:0.9.4-2+b1                      X.Org X server -- SiS USB display driver
ii  xserver-xorg-video-tdfx               1:1.4.3-4+b1                      X.Org X server -- tdfx display driver
ii  xserver-xorg-video-trident            1:1.3.4-2+b1                      X.Org X server -- Trident display driver
ii  xserver-xorg-video-tseng              1:1.2.4-2+b1                      X.Org X server -- Tseng display driver
ii  xserver-xorg-video-vesa               1:2.3.0-5+b1                      X.Org X server -- VESA display driver 
ii  xserver-xorg-video-vmware             1:11.0.3-2+b1                     X.Org X server -- VMware display driver
ii  xserver-xorg-video-voodoo             1:1.2.4-2+b1                      X.Org X server -- Voodoo display driver

i Xorg.0.log

Kod: Zaznacz cały

[    15.872] 
X.Org X Server 1.10.1
Release Date: 2011-04-15
[    15.886] X Protocol Version 11, Revision 0
[    15.886] Build Operating System: Linux 2.6.32-5-686-bigmem i686 Debian
[    15.886] Current Operating System: Linux rigel 2.6.38-2-686 #1 SMP Sun May 8 14:49:45 UTC 2011 i686
[    15.886] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.38-2-686 root=UUID=f71eda8c-d09a-4490-852b-ca38a6b8fb65 ro quiet
[    15.886] Build Date: 01 May 2011  10:14:44AM
[    15.886] xorg-server 2:1.10.1-2 (Julien Cristau <jcristau@debian.org>) 
[    15.886] Current version of pixman: 0.21.8
[    15.886] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    15.886] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    15.886] (==) Log file: "/var/log/Xorg.0.log", Time: Sat May 28 15:45:26 2011
[    15.921] (==) Using config file: "/etc/X11/xorg.conf"
[    15.921] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    15.944] (==) ServerLayout "X.org Configured"
[    15.944] (**) |-->Screen "Screen0" (0)
[    15.944] (**) |   |-->Monitor "Monitor0"
[    15.944] (**) |   |-->Device "Card0"
[    15.944] (**) |-->Input Device "Configured Mouse"
[    15.944] (**) |-->Input Device "Keyboard0"
[    15.944] (==) Automatically adding devices
[    15.944] (==) Automatically enabling devices
[    15.974] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    15.974] 	Entry deleted from font path.
[    15.974] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    15.974] 	Entry deleted from font path.
[    15.974] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    15.974] 	Entry deleted from font path.
[    15.975] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    15.975] 	Entry deleted from font path.
[    15.975] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    15.975] 	Entry deleted from font path.
[    15.995] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    15.995] 	Entry deleted from font path.
[    15.995] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[    15.995] 	Entry deleted from font path.
[    15.995] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[    15.995] 	Entry deleted from font path.
[    15.995] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[    15.995] 	Entry deleted from font path.
[    15.995] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[    15.995] 	Entry deleted from font path.
[    15.995] (**) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins,
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
	built-ins
[    15.995] (**) ModulePath set to "/usr/lib/xorg/modules"
[    15.995] (**) Extension "Composite" is enabled
[    15.995] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    15.995] (WW) Disabling Keyboard0
[    15.995] (II) Loader magic: 0x8232ac0
[    15.995] (II) Module ABI versions:
[    15.995] 	X.Org ANSI C Emulation: 0.4
[    15.995] 	X.Org Video Driver: 10.0
[    15.995] 	X.Org XInput driver : 12.2
[    15.995] 	X.Org Server Extension : 5.0
[    15.996] (--) PCI:*(0:2:0:0) 10de:0848:1043:82f2 rev 162, Mem @ 0xfd000000/16777216, 0xf0000000/134217728, 0xfa000000/33554432, I/O @ 0x0000ec00/128, BIOS @ 0x????????/131072
[    15.996] (II) Open ACPI successful (/var/run/acpid.socket)
[    15.996] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[    15.996] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[    15.996] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[    15.996] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[    15.996] (II) "dri" will be loaded by default.
[    15.996] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[    15.996] (II) LoadModule: "dbe"
[    16.007] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    16.015] (II) Module dbe: vendor="X.Org Foundation"
[    16.015] 	compiled for 1.10.1, module version = 1.0.0
[    16.015] 	Module class: X.Org Server Extension
[    16.015] 	ABI class: X.Org Server Extension, version 5.0
[    16.015] (II) Loading extension DOUBLE-BUFFER
[    16.016] (II) LoadModule: "dri2"
[    16.016] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    16.028] (II) Module dri2: vendor="X.Org Foundation"
[    16.028] 	compiled for 1.10.1, module version = 1.2.0
[    16.028] 	ABI class: X.Org Server Extension, version 5.0
[    16.028] (II) Loading extension DRI2
[    16.028] (II) LoadModule: "glx"
[    16.028] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    16.500] (II) Module glx: vendor="NVIDIA Corporation"
[    16.500] 	compiled for 4.0.2, module version = 1.0.0
[    16.500] 	Module class: X.Org Server Extension
[    16.500] (II) NVIDIA GLX Module  270.41.06  Mon Apr 18 15:11:28 PDT 2011
[    16.500] (II) Loading extension GLX
[    16.500] (II) LoadModule: "extmod"
[    16.501] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    16.507] (II) Module extmod: vendor="X.Org Foundation"
[    16.507] 	compiled for 1.10.1, module version = 1.0.0
[    16.507] 	Module class: X.Org Server Extension
[    16.507] 	ABI class: X.Org Server Extension, version 5.0
[    16.507] (II) Loading extension SELinux
[    16.507] (II) Loading extension MIT-SCREEN-SAVER
[    16.507] (II) Loading extension XFree86-VidModeExtension
[    16.507] (II) Loading extension XFree86-DGA
[    16.507] (II) Loading extension DPMS
[    16.507] (II) Loading extension XVideo
[    16.507] (II) Loading extension XVideo-MotionCompensation
[    16.507] (II) Loading extension X-Resource
[    16.507] (II) LoadModule: "record"
[    16.507] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    16.515] (II) Module record: vendor="X.Org Foundation"
[    16.515] 	compiled for 1.10.1, module version = 1.13.0
[    16.515] 	Module class: X.Org Server Extension
[    16.516] 	ABI class: X.Org Server Extension, version 5.0
[    16.516] (II) Loading extension RECORD
[    16.516] (II) LoadModule: "glcore"
[    16.516] (WW) Warning, couldn't open module glcore
[    16.516] (II) UnloadModule: "glcore"
[    16.516] (II) Unloading glcore
[    16.516] (EE) Failed to load module "glcore" (module does not exist, 0)
[    16.516] (II) LoadModule: "dri"
[    16.516] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    16.523] (II) Module dri: vendor="X.Org Foundation"
[    16.524] 	compiled for 1.10.1, module version = 1.0.0
[    16.524] 	ABI class: X.Org Server Extension, version 5.0
[    16.524] (II) Loading extension XFree86-DRI
[    16.524] (II) LoadModule: "nvidia"
[    16.524] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    16.557] (II) Module nvidia: vendor="NVIDIA Corporation"
[    16.557] 	compiled for 4.0.2, module version = 1.0.0
[    16.557] 	Module class: X.Org Video Driver
[    16.583] (II) LoadModule: "evdev"
[    16.583] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    16.655] (II) Module evdev: vendor="X.Org Foundation"
[    16.655] 	compiled for 1.10.1, module version = 2.6.0
[    16.655] 	Module class: X.Org XInput Driver
[    16.655] 	ABI class: X.Org XInput driver, version 12.2
[    16.655] (II) NVIDIA dlloader X Driver  270.41.06  Mon Apr 18 14:55:51 PDT 2011
[    16.655] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    16.656] (++) using VT number 7

[    16.675] (II) Loading sub module "fb"
[    16.675] (II) LoadModule: "fb"
[    16.675] (II) Loading /usr/lib/xorg/modules/libfb.so
[    16.688] (II) Module fb: vendor="X.Org Foundation"
[    16.688] 	compiled for 1.10.1, module version = 1.0.0
[    16.688] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    16.688] (II) Loading sub module "wfb"
[    16.688] (II) LoadModule: "wfb"
[    16.688] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    16.695] (II) Module wfb: vendor="X.Org Foundation"
[    16.695] 	compiled for 1.10.1, module version = 1.0.0
[    16.695] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    16.695] (II) Loading sub module "ramdac"
[    16.695] (II) LoadModule: "ramdac"
[    16.695] (II) Module "ramdac" already built-in
[    16.696] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    16.696] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    16.696] (II) Loading /usr/lib/xorg/modules/libfb.so
[    16.707] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    16.707] (==) NVIDIA(0): RGB weight 888
[    16.707] (==) NVIDIA(0): Default visual is TrueColor
[    16.707] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    16.707] (**) NVIDIA(0): Option "AllowGLXWithComposite" "true"
[    17.243] (II) NVIDIA(GPU-0): Display (LG Electronics W2343 (DFP-0)) does not support NVIDIA
[    17.243] (II) NVIDIA(GPU-0):     3D Vision stereo.
[    17.250] (II) NVIDIA(0): NVIDIA GPU GeForce 8300 (C77) at PCI:2:0:0 (GPU-0)
[    17.250] (--) NVIDIA(0): Memory: 524288 kBytes
[    17.250] (--) NVIDIA(0): VideoBIOS: 62.77.2b.00.00
[    17.250] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[    17.250] (--) NVIDIA(0): Connected display device(s) on GeForce 8300 at PCI:2:0:0
[    17.250] (--) NVIDIA(0):     LG Electronics W2343 (DFP-0)
[    17.250] (--) NVIDIA(0): LG Electronics W2343 (DFP-0): 165.0 MHz maximum pixel clock
[    17.250] (--) NVIDIA(0): LG Electronics W2343 (DFP-0): Internal Single Link TMDS
[    17.281] (II) NVIDIA(0): Assigned Display Device: DFP-0
[    17.281] (==) NVIDIA(0): 
[    17.281] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    17.281] (==) NVIDIA(0):     will be used as the requested mode.
[    17.281] (==) NVIDIA(0): 
[    17.281] (II) NVIDIA(0): Validated modes:
[    17.281] (II) NVIDIA(0):     "nvidia-auto-select"
[    17.281] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[    17.314] (--) NVIDIA(0): DPI set to (95, 94); computed from "UseEdidDpi" X config
[    17.314] (--) NVIDIA(0):     option
[    17.314] (--) Depth 24 pixmap format is 32 bpp
[    17.314] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[    17.319] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[    17.472] (II) Loading extension NV-GLX
[    17.573] (==) NVIDIA(0): Disabling shared memory pixmaps
[    17.573] (==) NVIDIA(0): Backing store disabled
[    17.573] (==) NVIDIA(0): Silken mouse enabled
[    17.574] (==) NVIDIA(0): DPMS enabled
[    17.574] (II) Loading extension NV-CONTROL
[    17.575] (II) Loading extension XINERAMA
[    17.575] (II) Loading sub module "dri2"
[    17.575] (II) LoadModule: "dri2"
[    17.575] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    17.575] (II) Module dri2: vendor="X.Org Foundation"
[    17.575] 	compiled for 1.10.1, module version = 1.2.0
[    17.575] 	ABI class: X.Org Server Extension, version 5.0
[    17.575] (II) NVIDIA(0): [DRI2] Setup complete
[    17.575] (==) RandR enabled
[    17.575] (II) Initializing built-in extension Generic Event Extension
[    17.575] (II) Initializing built-in extension SHAPE
[    17.575] (II) Initializing built-in extension MIT-SHM
[    17.575] (II) Initializing built-in extension XInputExtension
[    17.575] (II) Initializing built-in extension XTEST
[    17.575] (II) Initializing built-in extension BIG-REQUESTS
[    17.575] (II) Initializing built-in extension SYNC
[    17.575] (II) Initializing built-in extension XKEYBOARD
[    17.575] (II) Initializing built-in extension XC-MISC
[    17.575] (II) Initializing built-in extension SECURITY
[    17.575] (II) Initializing built-in extension XINERAMA
[    17.575] (II) Initializing built-in extension XFIXES
[    17.575] (II) Initializing built-in extension RENDER
[    17.575] (II) Initializing built-in extension RANDR
[    17.575] (II) Initializing built-in extension COMPOSITE
[    17.575] (II) Initializing built-in extension DAMAGE
[    17.576] (II) Initializing extension GLX
[    17.577] (II) SELinux: Disabled on system
[    17.998] (II) Using input driver 'evdev' for 'Configured Mouse'
[    17.998] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    17.998] (**) Option "SendCoreEvents" "true"
[    17.998] (**) Option "CorePointer"
[    17.998] (**) Configured Mouse: always reports core events
[    17.998] (**) Configured Mouse: Device: "/dev/input/mice"
[    18.016] (EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
[    18.060] (EE) PreInit returned 8 for "Configured Mouse"
[    18.060] (II) UnloadModule: "evdev"
[    18.060] (II) Unloading evdev
[    18.066] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    18.066] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    18.066] (II) Using input driver 'evdev' for 'Power Button'
[    18.066] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    18.066] (**) Power Button: always reports core events
[    18.066] (**) Power Button: Device: "/dev/input/event3"
[    18.066] (--) Power Button: Found keys
[    18.066] (II) Power Button: Configuring as keyboard
[    18.066] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    18.066] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    18.066] (**) Option "xkb_rules" "evdev"
[    18.066] (**) Option "xkb_model" "pc105"
[    18.067] (**) Option "xkb_layout" "pl"
[    18.133] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[    18.133] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    18.133] (II) Using input driver 'evdev' for 'Video Bus'
[    18.133] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    18.133] (**) Video Bus: always reports core events
[    18.133] (**) Video Bus: Device: "/dev/input/event4"
[    18.148] (--) Video Bus: Found keys
[    18.148] (II) Video Bus: Configuring as keyboard
[    18.148] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:12/LNXVIDEO:00/input/input4/event4"
[    18.148] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[    18.148] (**) Option "xkb_rules" "evdev"
[    18.148] (**) Option "xkb_model" "pc105"
[    18.148] (**) Option "xkb_layout" "pl"
[    18.149] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    18.149] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    18.149] (II) Using input driver 'evdev' for 'Power Button'
[    18.149] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    18.149] (**) Power Button: always reports core events
[    18.149] (**) Power Button: Device: "/dev/input/event2"
[    18.172] (--) Power Button: Found keys
[    18.172] (II) Power Button: Configuring as keyboard
[    18.172] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[    18.172] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[    18.172] (**) Option "xkb_rules" "evdev"
[    18.172] (**) Option "xkb_model" "pc105"
[    18.172] (**) Option "xkb_layout" "pl"
[    18.175] (II) config/udev: Adding input device A4Tech PS/2+USB Mouse (/dev/input/event5)
[    18.175] (**) A4Tech PS/2+USB Mouse: Applying InputClass "evdev pointer catchall"
[    18.175] (II) Using input driver 'evdev' for 'A4Tech PS/2+USB Mouse'
[    18.175] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    18.175] (**) A4Tech PS/2+USB Mouse: always reports core events
[    18.175] (**) A4Tech PS/2+USB Mouse: Device: "/dev/input/event5"
[    18.216] (--) A4Tech PS/2+USB Mouse: Found 12 mouse buttons
[    18.216] (--) A4Tech PS/2+USB Mouse: Found scroll wheel(s)
[    18.216] (--) A4Tech PS/2+USB Mouse: Found relative axes
[    18.216] (--) A4Tech PS/2+USB Mouse: Found x and y relative axes
[    18.216] (II) A4Tech PS/2+USB Mouse: Configuring as mouse
[    18.216] (II) A4Tech PS/2+USB Mouse: Adding scrollwheel support
[    18.216] (**) A4Tech PS/2+USB Mouse: YAxisMapping: buttons 4 and 5
[    18.216] (**) A4Tech PS/2+USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    18.216] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb4/4-3/4-3:1.0/input/input5/event5"
[    18.216] (II) XINPUT: Adding extended input device "A4Tech PS/2+USB Mouse" (type: MOUSE)
[    18.216] (II) A4Tech PS/2+USB Mouse: initialized for relative axes.
[    18.216] (**) A4Tech PS/2+USB Mouse: (accel) keeping acceleration scheme 1
[    18.216] (**) A4Tech PS/2+USB Mouse: (accel) acceleration profile 0
[    18.216] (**) A4Tech PS/2+USB Mouse: (accel) acceleration factor: 2.000
[    18.216] (**) A4Tech PS/2+USB Mouse: (accel) acceleration threshold: 4
[    18.216] (II) config/udev: Adding input device A4Tech PS/2+USB Mouse (/dev/input/mouse0)
[    18.216] (II) No input driver/identifier specified (ignoring)
[    18.217] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[    18.217] (II) No input driver/identifier specified (ignoring)
[    18.223] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    18.223] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    18.223] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    18.223] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    18.223] (**) AT Translated Set 2 keyboard: always reports core events
[    18.223] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    18.236] (--) AT Translated Set 2 keyboard: Found keys
[    18.236] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[    18.236] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    18.236] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[    18.236] (**) Option "xkb_rules" "evdev"
[    18.236] (**) Option "xkb_model" "pc105"
[    18.236] (**) Option "xkb_layout" "pl"
[    18.236] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[    18.236] (II) No input driver/identifier specified (ignoring)

fnmirk · Post autor: **fnmirk** » 28 maja 2011, 16:10

&quot pisze:

Kod: Zaznacz cały

ii  xserver-xorg-input-all                1:7.6+6                           the X.Org X server -- input driver metapackage
ii  xserver-xorg-input-evdev              1:2.6.0-2+b1                      X.Org X server -- evdev input driver
ii  xserver-xorg-input-mouse              1:1.7.0-2+b1                      X.Org X server -- mouse input driver
ii  xserver-xorg-input-synaptics          1.4.0-1+b1                        Synaptics TouchPad driver for X.Org server
ii  xserver-xorg-input-wacom              0.10.10+20110203-1+b1             X.Org X server -- Wacom input driver

Z tego zestawu zostawiłbym tylko xserver-xorg-input-evdev.

&quot pisze:

Kod: Zaznacz cały

18.060] (EE) PreInit returned 8 for "Configured Mouse"
[    18.060] (II) UnloadModule: "evdev"

Usuń plik /etc/X11/xorg.conf i sprawdź system, przedstaw go na forum.

diabolic3 · Post autor: **diabolic3** » 28 maja 2011, 17:01

Obecny Xorg:

Kod: Zaznacz cały

Section "ServerLayout"
        Identifier     "X.org Configured"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
        ModulePath   "/usr/lib/xorg/modules"
        FontPath     "/usr/share/fonts/X11/misc"
        FontPath     "/usr/share/fonts/X11/cyrillic"
        FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
        FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
        FontPath     "/usr/share/fonts/X11/Type1"
        FontPath     "/usr/share/fonts/X11/100dpi"
        FontPath     "/usr/share/fonts/X11/75dpi"
        FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
        FontPath     "built-ins"
EndSection

Section "Module"
        Load  "dbe"
        #Load  "dri2"
        Load  "glx"
        #Load  "dri"
        Load  "extmod"
        Load  "record"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "auto"
        Option      "Device" "/dev/input/mice"
        Option      "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
EndSection


Section "Device"
        Identifier  "Card0"
        Driver      "nvidia"
        BusID       "PCI:2:0:0"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Card0"
        Monitor    "Monitor0"
        SubSection "Display"
                Viewport   0 0
                Depth     1
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     4
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     8
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     15
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     16
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     24
        EndSubSection
EndSection

Section "Extensions"
Option "Composite" "Enable"
EndSection

Jest to obecny, który został zmieniony z wygenerowanego przez:

Kod: Zaznacz cały

 X -configure

(dodana została sekcja "Extensions" i zakomentowane dwa moduły). Co ciekawe powoduje on teraz w przypadku próby zmiany rozmiaru okna zamarznięcie całego pulpitu. Przed robieniem poprawek tak samo się działo.