Spróbuj zablokować moduł do tej drugiej karty.
Pokaż
Kod: Zaznacz cały
lsmod | grep sndKarta dźwi
Kod: Zaznacz cały
debian:/home/mer# lsmod | grep snd
snd_ca0106 23755 0
snd_intel8x0 19523 3
snd_ac97_codec 79140 2 snd_ca0106,snd_intel8x0
ac97_bus 710 1 snd_ac97_codec
snd_pcm_oss 28671 0
snd_mixer_oss 10461 1 snd_pcm_oss
snd_pcm 47362 5 snd_ca0106,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_seq_midi 3576 0
snd_rawmidi 12505 2 snd_ca0106,snd_seq_midi
snd_seq_midi_event 3684 1 snd_seq_midi
snd_seq 35459 2 snd_seq_midi,snd_seq_midi_event
snd_timer 12258 2 snd_pcm,snd_seq
snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq
snd 34363 15 snd_ca0106,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 3450 1 snd
snd_page_alloc 5041 3 snd_ca0106,snd_intel8x0,snd_pcm
debian:/home/mer#
Ty masz sterownik od ca0106 w jądrze.
Zablokuj tamtą dopisując do pliku /etc/modprobe.d/blacklist.conf
poten zrestartuj kompa i zobacz jakie masz karty.
Zablokuj tamtą dopisując do pliku /etc/modprobe.d/blacklist.conf
Kod: Zaznacz cały
blacklist snd_intel8x0
Po:dalej się karta nie pojawia?
Szukaj w /var/log/dmesg czy nie ma coś na ten temat.
Kod: Zaznacz cały
modprobe snd-ca0106Szukaj w /var/log/dmesg czy nie ma coś na ten temat.
Kod: Zaznacz cały
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-3-686 (Debian 2.6.32-9) (maks@debian.org) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Thu Feb 25 06:14:20 UTC 2010
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff70000 (usable)
[ 0.000000] BIOS-e820: 000000003ff70000 - 000000003ff72000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ff72000 - 000000003ff93000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ff93000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0x3ff70 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037000000 page 2M
[ 0.000000] 0037000000 - 00373fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 7000-d000
[ 0.000000] RAMDISK: 3787e000 - 37fefa4b
[ 0.000000] Allocated new RAMDISK: 00100000 - 00871a4b
[ 0.000000] Move RAMDISK from 000000003787e000 - 0000000037fefa4a to 00100000 - 00871a4a
[ 0.000000] ACPI: RSDP 000feba0 00014 (v00 DELL )
[ 0.000000] ACPI: RSDT 000fd192 00038 (v01 DELL GX270 00000007 ASL 00000061)
[ 0.000000] ACPI: FACP 000fd1ca 00074 (v01 DELL GX270 00000007 ASL 00000061)
[ 0.000000] ACPI: DSDT fffd2759 02795 (v01 DELL dt_ex 00001000 MSFT 0100000D)
[ 0.000000] ACPI: FACS 3ff70000 00040
[ 0.000000] ACPI: SSDT fffd4eee 000A7 (v01 DELL st_ex 00001000 MSFT 0100000D)
[ 0.000000] ACPI: APIC 000fd23e 0006C (v01 DELL GX270 00000007 ASL 00000061)
[ 0.000000] ACPI: BOOT 000fd2aa 00028 (v01 DELL GX270 00000007 ASL 00000061)
[ 0.000000] ACPI: ASF! 000fd2d2 00067 (v16 DELL GX270 00000007 ASL 00000061)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 139MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 0 - 373fe000
[ 0.000000] node 0 low ram: 00000000 - 373fe000
[ 0.000000] node 0 bootmap 00009000 - 0000fe80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 00014a9314] TEXT DATA BSS ==> [0001000000 - 00014a9314]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [00014aa000 - 00014b0198] BRK ==> [00014aa000 - 00014b0198]
[ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
[ 0.000000] #7 [0000100000 - 0000871a4b] NEW RAMDISK ==> [0000100000 - 0000871a4b]
[ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
[ 0.000000] found SMP MP-table at [c00fe710] fe710
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0003ff70
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x0003ff70
[ 0.000000] On node 0 totalpages: 261904
[ 0.000000] free_area_init_node: node 0, pgdat c1396fc0, node_mem_map c14b2000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3968 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 279 pages used for memmap
[ 0.000000] HighMem zone: 35419 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s34072 r0 d23272 u1048576
[ 0.000000] pcpu-alloc: s34072 r0 d23272 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259857
[ 0.000000] Kernel command line: root=/dev/hda3 ro
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000373fe:0003ff70)
[ 0.000000] Memory: 1025336k/1048000k available (2429k kernel code, 21700k reserved, 1284k data, 368k init, 142792k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.000000] .init : 0xc13a1000 - 0xc13fd000 ( 368 kB)
[ 0.000000] .data : 0xc125f44d - 0xc13a0760 (1284 kB)
[ 0.000000] .text : 0xc1000000 - 0xc125f44d (2429 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2793.492 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5586.98 BogoMIPS (lpj=11173968)
[ 0.004122] Security Framework initialized
[ 0.004176] SELinux: Disabled at boot.
[ 0.004231] Mount-cache hash table entries: 512
[ 0.004422] Initializing cgroup subsys ns
[ 0.004475] Initializing cgroup subsys cpuacct
[ 0.004528] Initializing cgroup subsys devices
[ 0.004579] Initializing cgroup subsys freezer
[ 0.004630] Initializing cgroup subsys net_cls
[ 0.004702] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.004789] CPU: L2 cache: 512K
[ 0.004838] CPU: Physical Processor ID: 0
[ 0.004888] CPU: Processor Core ID: 0
[ 0.004940] mce: CPU supports 4 MCE banks
[ 0.004999] CPU0: Thermal monitoring enabled (TM1)
[ 0.005059] Performance Events: no PMU driver, software events only.
[ 0.005151] Checking 'hlt' instruction... OK.
[ 0.021305] ACPI: Core revision 20090903
[ 0.057505] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.097252] CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
[ 0.100001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 0.008000] CPU: L2 cache: 512K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 0
[ 0.008000] CPU1: Thermal monitoring enabled (TM1)
[ 0.184057] CPU1: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
[ 0.184484] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.188114] Brought up 2 CPUs
[ 0.188170] Total of 2 processors activated (11173.68 BogoMIPS).
[ 0.188416] CPU0 attaching sched-domain:
[ 0.188422] domain 0: span 0-1 level SIBLING
[ 0.188426] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 0.188434] domain 1: span 0-1 level MC
[ 0.188437] groups: 0-1 (cpu_power = 1178)
[ 0.188445] CPU1 attaching sched-domain:
[ 0.188448] domain 0: span 0-1 level SIBLING
[ 0.188451] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 0.188458] domain 1: span 0-1 level MC
[ 0.188462] groups: 0-1 (cpu_power = 1178)
[ 0.188695] devtmpfs: initialized
[ 0.189265] regulator: core version 0.5
[ 0.189387] NET: Registered protocol family 16
[ 0.189547] ACPI: bus type pci registered
[ 0.189732] PCI: PCI BIOS revision 2.10 entry at 0xfbab0, last bus=2
[ 0.189786] PCI: Using configuration type 1 for base access
[ 0.190399] bio: create slab <bio-0> at 0
[ 0.191029] ACPI: EC: Look up EC in DSDT
[ 0.219621] ACPI: Interpreter enabled
[ 0.219684] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.219936] ACPI: Using IOAPIC for interrupt routing
[ 0.246872] ACPI: No dock devices found.
[ 0.250988] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.251085] pci 0000:00:00.0: Enabling MCH 'Overflow' Device
[ 0.251146] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe0000000-0xefffffff]
[ 0.251237] pci 0000:00:06.0: reg 10 32bit mmio: [0xfecf0000-0xfecf0fff]
[ 0.251328] pci 0000:00:1d.0: reg 20 io port: [0xff80-0xff9f]
[ 0.251384] pci 0000:00:1d.1: reg 20 io port: [0xff60-0xff7f]
[ 0.251438] pci 0000:00:1d.2: reg 20 io port: [0xff40-0xff5f]
[ 0.251491] pci 0000:00:1d.3: reg 20 io port: [0xff20-0xff3f]
[ 0.251552] pci 0000:00:1d.7: reg 10 32bit mmio: [0xffa80800-0xffa80bff]
[ 0.251611] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.251667] pci 0000:00:1d.7: PME# disabled
[ 0.251802] pci 0000:00:1f.0: HPET at 0xfed00000
[ 0.251809] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
[ 0.251874] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH4 GPIO
[ 0.251951] pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
[ 0.251959] pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
[ 0.251967] pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
[ 0.251974] pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
[ 0.251982] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[ 0.251990] pci 0000:00:1f.1: reg 24 32bit mmio: [0xfebffc00-0xfebfffff]
[ 0.252037] pci 0000:00:1f.2: reg 10 io port: [0xfe00-0xfe07]
[ 0.252044] pci 0000:00:1f.2: reg 14 io port: [0xfe10-0xfe13]
[ 0.252051] pci 0000:00:1f.2: reg 18 io port: [0xfe20-0xfe27]
[ 0.252058] pci 0000:00:1f.2: reg 1c io port: [0xfe30-0xfe33]
[ 0.252065] pci 0000:00:1f.2: reg 20 io port: [0xfea0-0xfeaf]
[ 0.252118] pci 0000:00:1f.3: reg 20 io port: [0xeda0-0xedbf]
[ 0.252163] pci 0000:00:1f.5: reg 10 io port: [0xee00-0xeeff]
[ 0.252170] pci 0000:00:1f.5: reg 14 io port: [0xedc0-0xedff]
[ 0.252178] pci 0000:00:1f.5: reg 18 32bit mmio: [0xfebffa00-0xfebffbff]
[ 0.252185] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xfebff900-0xfebff9ff]
[ 0.252215] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.252269] pci 0000:00:1f.5: PME# disabled
[ 0.252362] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
[ 0.252369] pci 0000:01:00.0: reg 14 32bit mmio pref: [0xf0000000-0xf7ffffff]
[ 0.252376] pci 0000:01:00.0: reg 18 32bit mmio pref: [0xf8000000-0xf807ffff]
[ 0.252393] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfea00000-0xfea1ffff]
[ 0.252455] pci 0000:00:01.0: bridge 32bit mmio: [0xfd000000-0xfeafffff]
[ 0.252460] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf0000000-0xf80fffff]
[ 0.252503] pci 0000:02:07.0: reg 10 io port: [0xdf20-0xdf3f]
[ 0.252545] pci 0000:02:07.0: supports D1 D2
[ 0.252598] pci 0000:02:0c.0: reg 10 32bit mmio: [0xfcfe0000-0xfcffffff]
[ 0.252610] pci 0000:02:0c.0: reg 18 io port: [0xdf40-0xdf7f]
[ 0.252651] pci 0000:02:0c.0: PME# supported from D0 D3hot D3cold
[ 0.252707] pci 0000:02:0c.0: PME# disabled
[ 0.252793] pci 0000:00:1e.0: transparent bridge
[ 0.252847] pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff]
[ 0.252852] pci 0000:00:1e.0: bridge 32bit mmio: [0xfcf00000-0xfcffffff]
[ 0.252867] pci_bus 0000:00: on NUMA node 0
[ 0.252874] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.253179] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.367229] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 0.368011] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 0.368782] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 0.369549] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 0.370319] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 0.371165] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 0.372021] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 0.372873] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 0.374248] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.374315] vgaarb: loaded
[ 0.374463] PCI: Using ACPI for IRQ routing
[ 0.374791] hpet clockevent registered
[ 0.374796] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.374853] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.375046] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.380019] Switching to clocksource tsc
[ 0.381790] pnp: PnP ACPI init
[ 0.381863] ACPI: bus type pnp registered
[ 0.408484] pnp 00:0a: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling
[ 0.408553] pnp 00:0a: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 13 (0x800-0x87f), disabling
[ 0.409288] pnp: PnP ACPI: found 11 devices
[ 0.409340] ACPI: ACPI bus type pnp unregistered
[ 0.409393] PnPBIOS: Disabled by ACPI PNP
[ 0.409455] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.409511] system 00:00: iomem range 0x100000-0xffffff could not be reserved
[ 0.409566] system 00:00: iomem range 0x1000000-0x3ff6ffff could not be reserved
[ 0.409630] system 00:00: iomem range 0xc0000-0xfffff could not be reserved
[ 0.409685] system 00:00: iomem range 0xfec00000-0xfec0ffff could not be reserved
[ 0.409749] system 00:00: iomem range 0xfee00000-0xfee0ffff has been reserved
[ 0.409805] system 00:00: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.409859] system 00:00: iomem range 0xfecf0000-0xfecf0fff has been reserved
[ 0.409914] system 00:00: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.409969] system 00:00: iomem range 0xffc00000-0xffffffff has been reserved
[ 0.410032] system 00:0a: ioport range 0xc00-0xc7f has been reserved
[ 0.444922] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.444977] pci 0000:00:01.0: IO window: disabled
[ 0.445032] pci 0000:00:01.0: MEM window: 0xfd000000-0xfeafffff
[ 0.445087] pci 0000:00:01.0: PREFETCH window: 0xf0000000-0xf80fffff
[ 0.445145] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.445198] pci 0000:00:1e.0: IO window: 0xd000-0xdfff
[ 0.445254] pci 0000:00:1e.0: MEM window: 0xfcf00000-0xfcffffff
[ 0.445308] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.445375] pci 0000:00:1e.0: setting latency timer to 64
[ 0.445381] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.445385] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.445389] pci_bus 0000:01: resource 1 mem: [0xfd000000-0xfeafffff]
[ 0.445393] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf80fffff]
[ 0.445397] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 0.445401] pci_bus 0000:02: resource 1 mem: [0xfcf00000-0xfcffffff]
[ 0.445404] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.445408] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.445451] NET: Registered protocol family 2
[ 0.445624] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.446116] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.446719] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.447272] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.447332] TCP reno registered
[ 0.447523] NET: Registered protocol family 1
[ 0.447692] pci 0000:01:00.0: Boot video device
[ 0.447769] Unpacking initramfs...
[ 0.722720] Freeing initrd memory: 7622k freed
[ 0.729288] Simple Boot Flag value 0x87 read from CMOS RAM was invalid
[ 0.729345] Simple Boot Flag at 0x7a set to 0x1
[ 0.729667] audit: initializing netlink socket (disabled)
[ 0.729732] type=2000 audit(1270563481.727:1): initialized
[ 0.729987] highmem bounce pool size: 64 pages
[ 0.730042] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.732026] VFS: Disk quotas dquot_6.5.2
[ 0.732160] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.732309] msgmni has been set to 1739
[ 0.732612] alg: No test for stdrng (krng)
[ 0.732737] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.732801] io scheduler noop registered
[ 0.732851] io scheduler anticipatory registered
[ 0.732902] io scheduler deadline registered
[ 0.733000] io scheduler cfq registered (default)
[ 0.733277] isapnp: Scanning for PnP cards...
[ 1.086970] isapnp: No Plug & Play device found
[ 1.088869] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.089019] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.089441] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.089663] PNP: PS/2 Controller [PNP0303:KBD] at 0x60,0x64 irq 1
[ 1.089716] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.090497] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.090659] mice: PS/2 mouse device common for all mice
[ 1.090778] rtc_cmos 00:05: RTC can wake from S4
[ 1.090875] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.090948] rtc0: alarms up to one day, 242 bytes nvram, hpet irqs
[ 1.091013] cpuidle: using governor ladder
[ 1.091064] cpuidle: using governor menu
[ 1.091117] No iBFT detected.
[ 1.091687] TCP cubic registered
[ 1.091914] NET: Registered protocol family 10
[ 1.092678] lo: Disabled Privacy Extensions
[ 1.093201] Mobile IPv6
[ 1.093252] NET: Registered protocol family 17
[ 1.093319] Using IPI No-Shortcut mode
[ 1.093478] PM: Resume from disk failed.
[ 1.093487] registered taskstats version 1
[ 1.093831] rtc_cmos 00:05: setting system clock to 2010-04-06 14:18:03 UTC (1270563483)
[ 1.093968] Freeing unused kernel memory: 368k freed
[ 1.094335] Write protecting the kernel text: 2432k
[ 1.094415] Write protecting the kernel read-only data: 888k
[ 1.125096] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.336368] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 1.336455] ACPI: Power Button [VBTN]
[ 1.336681] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.336758] ACPI: Power Button [PWRF]
[ 1.419864] usbcore: registered new interface driver usbfs
[ 1.420282] usbcore: registered new interface driver hub
[ 1.420632] usbcore: registered new device driver usb
[ 1.440584] SCSI subsystem initialized
[ 1.461503] Uniform Multi-Platform E-IDE driver
[ 1.467302] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
[ 1.467380] Copyright (c) 1999-2006 Intel Corporation.
[ 1.467495] e1000 0000:02:0c.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.475858] Linux agpgart interface v0.103
[ 1.480200] Floppy drive(s): fd0 is 1.44M
[ 1.516219] piix 0000:00:1f.1: IDE controller (0x8086:0x24db rev 0x02)
[ 1.516289] PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.516367] piix 0000:00:1f.1: not 100% native mode: will probe irqs later
[ 1.516428] ide0: BM-DMA at 0xffa0-0xffa7
[ 1.516488] ide1: BM-DMA at 0xffa8-0xffaf
[ 1.516548] Probing IDE interface ide0...
[ 1.533848] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.539815] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.542136] libata version 3.00 loaded.
[ 1.549310] FDC 0 is a post-1991 82077
[ 1.738852] e1000: 0000:02:0c.0: e1000_probe: (PCI:33MHz:32-bit) 00:0f:1f:99:c9:e3
[ 1.774914] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 1.804153] hda: WDC WD2500AAJB-00WGA0, ATA DISK drive
[ 2.476069] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 2.476141] hda: UDMA/100 mode selected
[ 2.476276] Probing IDE interface ide1...
[ 3.212151] hdc: JLMS XJ-HD166S, ATAPI CD/DVD-ROM drive
[ 3.548061] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 3.548124] hdc: UDMA/33 mode selected
[ 3.548265] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 3.548387] ide1 at 0x170-0x177,0x376 on irq 15
[ 3.548758] agpgart-intel 0000:00:00.0: Intel 865 Chipset
[ 3.559221] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 3.559347] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 3.559431] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.559439] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.559542] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 3.559648] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.563593] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[ 3.563622] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffa80800
[ 3.580012] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.580109] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.580164] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.580227] usb usb1: Product: EHCI Host Controller
[ 3.580278] usb usb1: Manufacturer: Linux 2.6.32-3-686 ehci_hcd
[ 3.580331] usb usb1: SerialNumber: 0000:00:1d.7
[ 3.580586] usb usb1: configuration #1 chosen from 1 choice
[ 3.580726] hub 1-0:1.0: USB hub found
[ 3.580787] hub 1-0:1.0: 8 ports detected
[ 3.580943] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.581006] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.581010] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.581072] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.581164] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ff80
[ 3.581254] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.581309] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.581371] usb usb2: Product: UHCI Host Controller
[ 3.581423] usb usb2: Manufacturer: Linux 2.6.32-3-686 uhci_hcd
[ 3.581475] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.581619] usb usb2: configuration #1 chosen from 1 choice
[ 3.581708] hub 2-0:1.0: USB hub found
[ 3.581765] hub 2-0:1.0: 2 ports detected
[ 3.581969] ata_piix 0000:00:1f.2: version 2.13
[ 3.581982] ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.582039] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 3.582310] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 3.582647] scsi0 : ata_piix
[ 3.582921] scsi1 : ata_piix
[ 3.583063] ata1: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 18
[ 3.583127] ata2: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 18
[ 3.583306] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.583385] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.583393] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.583478] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 3.583603] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ff60
[ 3.583725] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.583790] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.583863] usb usb3: Product: UHCI Host Controller
[ 3.583925] usb usb3: Manufacturer: Linux 2.6.32-3-686 uhci_hcd
[ 3.583985] usb usb3: SerialNumber: 0000:00:1d.1
[ 3.584233] usb usb3: configuration #1 chosen from 1 choice
[ 3.584364] hub 3-0:1.0: USB hub found
[ 3.585280] hub 3-0:1.0: 2 ports detected
[ 3.585518] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.585596] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.585603] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.585685] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 3.585786] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[ 3.585903] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.585961] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.586027] usb usb4: Product: UHCI Host Controller
[ 3.586082] usb usb4: Manufacturer: Linux 2.6.32-3-686 uhci_hcd
[ 3.586138] usb usb4: SerialNumber: 0000:00:1d.2
[ 3.586359] usb usb4: configuration #1 chosen from 1 choice
[ 3.586485] hub 4-0:1.0: USB hub found
[ 3.586563] hub 4-0:1.0: 2 ports detected
[ 3.586724] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.586791] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 3.586799] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.586871] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 3.586964] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ff20
[ 3.587079] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.587141] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.587211] usb usb5: Product: UHCI Host Controller
[ 3.587270] usb usb5: Manufacturer: Linux 2.6.32-3-686 uhci_hcd
[ 3.587327] usb usb5: SerialNumber: 0000:00:1d.3
[ 3.587544] usb usb5: configuration #1 chosen from 1 choice
[ 3.587670] hub 5-0:1.0: USB hub found
[ 3.587737] hub 5-0:1.0: 2 ports detected
[ 4.188018] usb 2-2: new low speed USB device using uhci_hcd and address 2
[ 4.354035] usb 2-2: New USB device found, idVendor=15d9, idProduct=0a33
[ 4.354091] usb 2-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.354145] usb 2-2: Product: USB Mouse
[ 4.354309] usb 2-2: configuration #1 chosen from 1 choice
[ 4.596014] usb 5-2: new full speed USB device using uhci_hcd and address 2
[ 4.784730] usb 5-2: New USB device found, idVendor=03f0, idProduct=3e02
[ 4.784785] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.784840] usb 5-2: Product: photosmart 7550
[ 4.784891] usb 5-2: Manufacturer: hp
[ 4.784941] usb 5-2: SerialNumber: CN2CP410W162
[ 4.785106] usb 5-2: configuration #1 chosen from 1 choice
[ 5.435337] usbcore: registered new interface driver hiddev
[ 5.436565] ide-gd driver 1.18
[ 5.436683] hda: max request size: 512KiB
[ 5.448242] input: USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input3
[ 5.448437] ide-cd driver 5.00
[ 5.448480] generic-usb 0003:15D9:0A33.0001: input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:1d.0-2/input0
[ 5.448572] usbcore: registered new interface driver usbhid
[ 5.448637] usbhid: v2.6:USB HID core driver
[ 5.461796] hda: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63
[ 5.462024] hda: cache flushes supported
[ 5.462142] hda: hda1 hda2 < hda5 hda6 hda7 hda8 > hda3
[ 5.518395] ide-cd: hdc: ATAPI 48X DVD-ROM drive, 512kB Cache
[ 5.518606] Uniform CD-ROM driver Revision: 3.20
[ 6.021740] PM: Starting manual resume from disk
[ 6.021795] PM: Resume from partition 3:8
[ 6.021797] PM: Checking hibernation image.
[ 6.022162] PM: Error -22 checking image file
[ 6.022165] PM: Resume from disk failed.
[ 6.051815] kjournald starting. Commit interval 5 seconds
[ 6.051880] EXT3-fs: mounted filesystem with ordered data mode.
[ 7.656035] udev: starting version 151
[ 8.104543] processor LNXCPU:00: registered as cooling_device0
[ 8.104981] processor LNXCPU:01: registered as cooling_device1
[ 8.179164] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 8.249135] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 8.299168] parport_pc 00:09: reported by Plug and Play ACPI
[ 8.299286] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 8.307483] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 8.319258] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.732579] intel_rng: FWH not detected
[ 9.133151] nvidia: module license 'NVIDIA' taints kernel.
[ 9.133209] Disabling lock debugging due to kernel taint
[ 9.305301] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 9.382833] usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x3E02
[ 9.382933] usbcore: registered new interface driver usblp
[ 9.551752] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.551819] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none :o wns=io+mem
[ 9.552202] NVRM: loading NVIDIA Linux x86 Kernel Module 96.43.16 Thu Jan 28 15:58:20 PST 2010
[ 9.950154] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 9.950295] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 9.955307] cannot find the slot for index 0 (range 0-0), error: -16
[ 9.955381] CA0106: probe of 0000:02:07.0 failed with error -16
[ 10.372015] intel8x0_measure_ac97_clock: measured 54551 usecs (2629 samples)
[ 10.372073] intel8x0: clocking to 48000
[ 11.099226] Adding 1349420k swap on /dev/hda8. Priority:-1 extents:1 across:1349420k
[ 11.233047] EXT3 FS on hda3, internal journal
[ 11.406551] loop: module loaded
[ 11.550236] fuse init (API version 7.13)
[ 14.334685] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.336393] e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 14.336705] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 23.121364] Bluetooth: Core ver 2.15
[ 23.121513] NET: Registered protocol family 31
[ 23.121559] Bluetooth: HCI device and connection manager initialized
[ 23.121610] Bluetooth: HCI socket layer initialized
[ 23.158434] Bluetooth: L2CAP ver 2.14
[ 23.158488] Bluetooth: L2CAP socket layer initialized
[ 23.306723] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 23.306789] Bluetooth: BNEP filters: protocol multicast
[ 23.377291] Bridge firewalling registered
[ 23.618294] Bluetooth: SCO (Voice Link) ver 0.6
[ 23.618355] Bluetooth: SCO socket layer initialized
[ 24.422044] lp0: using parport0 (interrupt-driven).
[ 24.529028] ppdev: user-space parallel port driver
[ 25.116009] eth0: no IPv6 routers present
[ 26.426122] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
[ 26.426141] agpgart-intel 0000:00:00.0: bridge is in legacy mode, falling back to 2.x
[ 26.426151] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[ 26.426197] nvidia 0000:01:00.0: putting AGP V2 device into 4x modeKod: Zaznacz cały
CA0106: probe of 0000:02:07.0 failed with error -16Możesz spróbować wsadzić tę kartę w inny slot pci albo zainstalować nowszy sterownik.