Kod: Zaznacz cały
root@alfa:/home/witek# more 1.txt
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-2-686 (Debian 2.6.26-21lenny4) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Tue Mar 9 17:35:51 UTC 2010
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
[ 0.000000] BIOS-e820: 000000007ffb0000 - 000000007ffc0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ffc0000 - 000000007fff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
[ 0.000000] 1151MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at [c00ff780] 000ff780
[ 0.000000] Entering add_active_range(0, 0, 524208) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 524208
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 524208
[ 0.000000] On node 0 totalpages: 524208
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2304 pages used for memmap
[ 0.000000] HighMem zone: 292528 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F8060, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 7FFB0000, 0034 (r1 A M I OEMRSDT 6000726 MSFT 97)
[ 0.000000] ACPI: FACP 7FFB0200, 0084 (r2 A M I OEMFACP 6000726 MSFT 97)
[ 0.000000] ACPI: DSDT 7FFB0450, 5319 (r1 4CDS2 4CDS2121 121 INTL 2002026)
[ 0.000000] ACPI: FACS 7FFC0000, 0040
[ 0.000000] ACPI: APIC 7FFB0390, 0078 (r1 A M I OEMAPIC 6000726 MSFT 97)
[ 0.000000] ACPI: MCFG 7FFB0410, 003C (r1 A M I OEMMCFG 6000726 MSFT 97)
[ 0.000000] ACPI: OEMB 7FFC0040, 0051 (r1 A M I AMI_OEM 6000726 MSFT 97)
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 2 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
[ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37992 bytes of per cpu data
[ 0.000000] NR_CPUS: 8, nr_cpu_ids: 4
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520112
[ 0.000000] Kernel command line: root=/dev/hda1 ro quiet
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] mapped IOAPIC to ffff9000 (fecc0000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1795.691 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Memory: 2068928k/2096832k available (1771k kernel code, 26708k reserved, 750k data, 244k init, 1179328k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
[ 0.004000] .data : 0xc02bac75 - 0xc0376620 ( 750 kB)
[ 0.004000] .text : 0xc0100000 - 0xc02bac75 (1771 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.084111] Calibrating delay using timer specific routine.. 3594.10 BogoMIPS (lpj=7188201)
[ 0.084149] Security Framework initialized
[ 0.084155] SELinux: Disabled at boot.
[ 0.084159] Capability LSM initialized
[ 0.084173] Mount-cache hash table entries: 512
[ 0.084331] Initializing cgroup subsys ns
[ 0.084336] Initializing cgroup subsys cpuacct
[ 0.084338] Initializing cgroup subsys devices
[ 0.084358] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.084361] CPU: L2 cache: 1024K
[ 0.084364] CPU: Physical Processor ID: 0
[ 0.084366] CPU: Processor Core ID: 0
[ 0.084369] Intel machine check architecture supported.
[ 0.084373] Intel machine check reporting enabled on CPU#0.
[ 0.084375] using mwait in idle threads.
[ 0.084385] Checking 'hlt' instruction... OK.
[ 0.101334] ACPI: Core revision 20080321
[ 0.109022] ENABLING IO-APIC IRQs
[ 0.109210] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.148907] CPU0: Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz stepping 0d
[ 0.152009] Booting processor 1/1 ip 6000
[ 0.160010] Initializing CPU#1
[ 0.160010] Calibrating delay using timer specific routine.. 3591.20 BogoMIPS (lpj=7182403)
[ 0.160010] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.160010] CPU: L2 cache: 1024K
[ 0.160010] CPU: Physical Processor ID: 0
[ 0.160010] CPU: Processor Core ID: 1
[ 0.160010] Intel machine check architecture supported.
[ 0.160010] Intel machine check reporting enabled on CPU#1.
[ 0.240015] CPU1: Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz stepping 0d
[ 0.240015] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.244015] Brought up 2 CPUs
[ 0.244015] Total of 2 processors activated (7185.30 BogoMIPS).
[ 0.244015] CPU0 attaching sched-domain:
[ 0.244015] domain 0: span 0-1
[ 0.244015] groups: 0 1
[ 0.244015] CPU1 attaching sched-domain:
[ 0.244015] domain 0: span 0-1
[ 0.244015] groups: 1 0
[ 0.244015] net_namespace: 660 bytes
[ 0.244015] Booting paravirtualized kernel on bare hardware
[ 0.244015] NET: Registered protocol family 16
[ 0.244015] ACPI: bus type pci registered
[ 0.244015] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.244015] PCI: Not using MMCONFIG.
[ 0.244015] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=128
[ 0.244015] PCI: Using configuration type 1 for base access
[ 0.244015] Setting up standard PCI resources
[ 0.248015] ACPI: EC: Look up EC in DSDT
[ 0.256016] ACPI: Interpreter enabled
[ 0.256016] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.256016] ACPI: Using IOAPIC for interrupt routing
[ 0.256016] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.261918] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.261921] PCI: Using MMCONFIG for extended config space
[ 0.272854] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.272854] PCI: Transparent bridge - 0000:00:13.1
[ 0.272854] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.272854] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.272854] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
[ 0.272854] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
[ 0.288855] ACPI: PCI Root Bridge [PCI1] (0000:80)
[ 0.288855] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
[ 0.288855] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.288855] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.288855] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.288855] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.288855] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.288855] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.288855] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.288855] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.288855] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 8C, should be 7F [20080321]
[ 0.288855] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.288855] pnp: PnP ACPI init
[ 0.288855] ACPI: bus type pnp registered
[ 0.296855] pnp: PnP ACPI: found 15 devices
[ 0.296855] ACPI: ACPI bus type pnp unregistered
[ 0.296855] PnPBIOS: Disabled by ACPI PNP
[ 0.296855] PCI: Using ACPI for IRQ routing
[ 0.303021] ACPI: RTC can wake from S4
[ 0.306990] system 00:06: ioport range 0x295-0x296 has been reserved
[ 0.306993] system 00:06: ioport range 0x3e0-0x3e7 has been reserved
[ 0.306996] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.306999] system 00:06: ioport range 0x800-0x87f has been reserved
[ 0.307002] system 00:06: ioport range 0x400-0x41f has been reserved
[ 0.307005] system 00:06: iomem range 0xfecc0000-0xfecc0fff has been reserved
[ 0.307013] system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.307016] system 00:08: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.307024] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.307031] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.307034] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
[ 0.307037] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 0.307039] system 00:0d: iomem range 0x100000-0x7fffffff could not be reserved
[ 0.307043] system 00:0d: iomem range 0xfeb00000-0xffffffff could not be reserved
[ 0.336856] PCI: Bridge: 0000:00:01.0
[ 0.336856] IO window: e000-efff
[ 0.336856] MEM window: 0xfea00000-0xfeafffff
[ 0.336856] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
[ 0.336856] PCI: Bridge: 0000:00:02.0
[ 0.336856] IO window: disabled.
[ 0.336856] MEM window: disabled.
[ 0.336856] PREFETCH window: 0x00000000fdf00000-0x00000000fdffffff
[ 0.336856] PCI: Bridge: 0000:00:13.1
[ 0.336856] IO window: disabled.
[ 0.336856] MEM window: disabled.
[ 0.336856] PREFETCH window: disabled.
[ 0.336856] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.336856] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 27
[ 0.336856] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 0.336856] PCI: Setting latency timer of device 0000:00:13.1 to 64
[ 0.336856] NET: Registered protocol family 2
[ 0.350266] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.350502] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.352406] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.352716] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.352720] TCP reno registered
[ 0.359756] NET: Registered protocol family 1
[ 0.359878] checking if image is initramfs... it is
[ 0.835757] Switched to high resolution mode on CPU 1
[ 0.839331] Switched to high resolution mode on CPU 0
[ 0.882270] Freeing initrd memory: 6076k freed
[ 0.887755] audit: initializing netlink socket (disabled)
[ 0.887755] type=2000 audit(1270318024.880:1): initialized
[ 0.887755] highmem bounce pool size: 64 pages
[ 0.887755] Total HugeTLB memory allocated, 0
[ 0.887755] VFS: Disk quotas dquot_6.5.1
[ 0.887755] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.887755] msgmni has been set to 1750
[ 0.887755] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.887755] io scheduler noop registered
[ 0.887755] io scheduler anticipatory registered
[ 0.887755] io scheduler deadline registered
[ 0.887755] io scheduler cfq registered (default)
[ 0.887755] PCI: VIA PCI bridge detected.Disabling DAC.
[ 0.887755] pci 0000:01:00.0: Boot video device
[ 0.887755] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 0.887755] assign_interrupt_mode Found MSI capability
[ 0.887755] Allocate Port Service[0000:00:02.:p cie00]
[ 0.887755] Allocate Port Service[0000:00:02.:p cie01]
[ 0.887755] Allocate Port Service[0000:00:02.:p cie02]
[ 0.887755] Allocate Port Service[0000:00:02.:p cie03]
[ 0.889472] Load service driver aer on pcie device 0000:00:02.:p cie01
[ 0.891755] isapnp: Scanning for PnP cards...
[ 1.243570] isapnp: No Plug & Play device found
[ 1.247875] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.247875] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.247876] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.247876] brd: module loaded
[ 1.247876] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.247876] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.247876] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.247876] mice: PS/2 mouse device common for all mice
[ 1.247876] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.247876] rtc0: alarms up to one year, y3k
[ 1.247876] cpuidle: using governor ladder
[ 1.247876] cpuidle: using governor menu
[ 1.247876] No iBFT detected.
[ 1.248304] TCP cubic registered
[ 1.248304] NET: Registered protocol family 17
[ 1.248304] Using IPI No-Shortcut mode
[ 1.248304] registered taskstats version 1
[ 1.248426] rtc_cmos 00:07: setting system clock to 2010-04-03 18:07:06 UTC (1270318026)
[ 1.248536] Freeing unused kernel memory: 244k freed
[ 1.299523] input: AT Translated Set 2 keyboard as /class/input/input0
[ 1.335765] ACPI: ACPI0007:00 is registered as cooling_device0
[ 1.335765] ACPI: Processor [CPU1] (supports 16 throttling states)
[ 1.337327] ACPI: ACPI0007:01 is registered as cooling_device1
[ 1.337327] ACPI: Processor [CPU2] (supports 16 throttling states)
[ 1.652494] No dock devices found.
[ 1.660340] SCSI subsystem initialized
[ 1.693725] usbcore: registered new interface driver usbfs
[ 1.693752] usbcore: registered new interface driver hub
[ 1.693780] usbcore: registered new device driver usb
[ 1.694262] USB Universal Host Controller Interface driver v3.0
[ 1.694262] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 1.694262] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 1.694262] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 1.694262] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000c480
[ 1.694262] usb usb1: configuration #1 chosen from 1 choice
[ 1.694262] hub 1-0:1.0: USB hub found
[ 1.694262] hub 1-0:1.0: 2 ports detected
[ 1.694262] libata version 3.00 loaded.
[ 1.744768] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 1.788168] Floppy drive(s): fd0 is 1.44M
[ 1.796973] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.796976] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.796979] usb usb1: Product: UHCI Host Controller
[ 1.796981] usb usb1: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 1.796983] usb usb1: SerialNumber: 0000:00:10.0
[ 1.800765] ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 22 (level, low) -> IRQ 22
[ 1.800765] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 1.800765] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 1.800765] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000c800
[ 1.800765] usb usb2: configuration #1 chosen from 1 choice
[ 1.800765] hub 2-0:1.0: USB hub found
[ 1.800765] hub 2-0:1.0: 2 ports detected
[ 1.808074] FDC 0 is a post-1991 82077
[ 1.904691] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.904694] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.904697] usb usb2: Product: UHCI Host Controller
[ 1.904699] usb usb2: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 1.904701] usb usb2: SerialNumber: 0000:00:10.1
[ 1.907885] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 21
[ 1.907885] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 1.907885] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 1.907885] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c880
[ 1.907885] usb usb3: configuration #1 chosen from 1 choice
[ 1.907885] hub 3-0:1.0: USB hub found
[ 1.907885] hub 3-0:1.0: 2 ports detected
[ 2.036831] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.036831] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.036831] usb usb3: Product: UHCI Host Controller
[ 2.036831] usb usb3: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 2.036831] usb usb3: SerialNumber: 0000:00:10.2
[ 2.036831] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 23
[ 2.036831] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 2.036831] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 2.036831] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000cc00
[ 2.036831] usb usb4: configuration #1 chosen from 1 choice
[ 2.036831] hub 4-0:1.0: USB hub found
[ 2.036831] hub 4-0:1.0: 2 ports detected
[ 2.184829] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.184829] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.184829] usb usb4: Product: UHCI Host Controller
[ 2.184829] usb usb4: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 2.184829] usb usb4: SerialNumber: 0000:00:10.3
[ 2.233365] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21
[ 2.233365] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 2.233365] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[ 2.233365] ehci_hcd 0000:00:10.4: debug port 1
[ 2.233365] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfe9ffc00
[ 2.241380] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 2.241469] usb usb5: configuration #1 chosen from 1 choice
[ 2.241501] hub 5-0:1.0: USB hub found
[ 2.241509] hub 5-0:1.0: 8 ports detected
[ 2.345249] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.345252] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.345255] usb usb5: Product: EHCI Host Controller
[ 2.345257] usb usb5: Manufacturer: Linux 2.6.26-2-686 ehci_hcd
[ 2.345259] usb usb5: SerialNumber: 0000:00:10.4
[ 2.349142] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 2.349142] eth0: VIA Rhine II at 0x1c000, 00:19:66:37:db:b0, IRQ 23.
[ 2.349643] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[ 2.349643] sata_via 0000:00:0f.0: version 2.3
[ 2.349643] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 21
[ 2.349643] sata_via 0000:00:0f.0: routed to hard irq line 5
[ 2.361642] scsi0 : sata_via
[ 2.361642] scsi1 : sata_via
[ 2.361642] Uniform Multi-Platform E-IDE driver
[ 2.361642] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 2.361642] ata1: SATA max UDMA/133 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 21
[ 2.361642] ata2: SATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 21
[ 2.563321] ata1: SATA link up 1.5 Gbps (SStatus 123 SControl 300)
[ 2.739646] ata1.00: HPA detected: current 1465147055, native 1465149168
[ 2.739646] ata1.00: ATA-8: WDC WD7501AALS-00J7B0, 05.00K05, max UDMA/133
[ 2.739646] ata1.00: 1465147055 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.755895] ata1.00: configured for UDMA/133
[ 2.959318] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 2.970155] scsi 0:0:0:0: Direct-Access ATA WDC WD7501AALS-0 05.0 PQ: 0 ANSI: 5
[ 3.429736] VP_IDE: IDE controller (0x1106:0x0571 rev 0x07) at PCI slot 0000:00:0f.1
[ 3.429768] VP_IDE: not 100% native mode: will probe irqs later
[ 3.429787] VP_IDE: VIA vt8237s (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
[ 3.429798] ide0: BM-DMA at 0xfc00-0xfc07
[ 3.429805] ide1: BM-DMA at 0xfc08-0xfc0f
[ 3.429808] Probing IDE interface ide0...
[ 3.439706] Driver 'sd' needs updating - please use bus_type methods
[ 3.439706] sd 0:0:0:0: [sda] 1465147055 512-byte hardware sectors (750155 MB)
[ 3.439706] sd 0:0:0:0: [sda] Write Protect is off
[ 3.439706] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.439706] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.439706] sd 0:0:0:0: [sda] 1465147055 512-byte hardware sectors (750155 MB)
[ 3.439706] sd 0:0:0:0: [sda] Write Protect is off
[ 3.439706] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.439706] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.439706] sda: sda1
[ 3.443969] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.859584] hda: ExcelStor Technology J880, ATA DISK drive
[ 3.976088] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 4.218059] hdb: WDC WD2000JB-00KFA0, ATA DISK drive
[ 4.218059] usb 3-1: configuration #1 chosen from 1 choice
[ 4.268655] usb 3-1: New USB device found, idVendor=09da, idProduct=0006
[ 4.268659] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.268662] usb 3-1: Product: PS/2+USB Mouse
[ 4.268664] usb 3-1: Manufacturer: A4Tech
[ 4.286398] usbcore: registered new interface driver hiddev
[ 4.298392] input: A4Tech PS/2+USB Mouse as /class/input/input1
[ 4.298427] input,hidraw0: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:10.2-1
[ 4.298445] usbcore: registered new interface driver usbhid
[ 4.298449] usbhid: v2.6:USB HID core driver
[ 4.311548] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 4.311686] hda: UDMA/133 mode selected
[ 4.311821] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 4.311908] hdb: UDMA/100 mode selected
[ 4.311988] Probing IDE interface ide1...
[ 5.175679] hdc: SONY DVD RW DW-Q28A, ATAPI CD/DVD-ROM drive
[ 5.843556] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 5.843556] hdc: UDMA/66 mode selected
[ 5.876055] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 5.887559] ide1 at 0x170-0x177,0x376 on irq 15
[ 5.903566] hda: max request size: 512KiB
[ 5.903566] hda: 160836480 sectors (82348 MB) w/1719KiB Cache, CHS=16383/255/63
[ 5.903586] hda: cache flushes supported
[ 5.903586] hda: hda1 hda2 hda3
[ 5.927560] hdb: max request size: 512KiB
[ 5.927560] hdb: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63
[ 5.927560] hdb: cache flushes supported
[ 5.927560] hdb: hdb1 < hdb5 >
[ 5.946934] hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[ 5.946934] Uniform CD-ROM driver Revision: 3.20
[ 6.312435] PM: Starting manual resume from disk
[ 6.341823] kjournald starting. Commit interval 5 seconds
[ 6.341823] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.217746] udevd version 125 started
[ 8.870874] Linux agpgart interface v0.103
[ 8.981931] agpgart: Detected VIA PT880 Ultra chipset
[ 8.984684] agpgart: AGP aperture is 64M @ 0xf8000000
[ 9.008978] input: Power Button (FF) as /class/input/input2
[ 9.067742] ACPI: Power Button (FF) [PWRF]
[ 9.067837] input: Sleep Button (CM) as /class/input/input3
[ 9.113325] ACPI: Sleep Button (CM) [SLPB]
[ 9.113384] input: Power Button (CM) as /class/input/input4
[ 9.177309] ACPI: Power Button (CM) [PWRB]
[ 9.406807] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 9.415803] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.665917] input: PC Speaker as /class/input/input5
[ 10.052939] ACPI: PCI Interrupt 0000:80:01.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 10.052939] PCI: Setting latency timer of device 0000:80:01.0 to 64
[ 10.052939] PCI: Disallowing DAC for device 0000:80:01.0
[ 10.083886] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 10.153634] input: ImExPS/2 Generic Explorer Mouse as /class/input/input6
[ 10.197631] parport_pc 00:05: reported by Plug and Play ACPI
[ 10.197631] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 10.205630] parport0: Printer, Hewlett-Packard HP LaserJet 6P
[ 11.079286] Adding 979956k swap on /dev/hda2. Priority:-1 extents:1 across:979956k
[ 11.357135] EXT3 FS on hda1, internal journal
[ 11.549321] loop: module loaded
[ 11.975553] fuse init (API version 7.9)
[ 12.063095] kjournald starting. Commit interval 5 seconds
[ 12.087185] EXT3 FS on hda3, internal journal
[ 12.087190] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.208860] EXT2-fs warning (device hdb5): ext2_fill_super: mounting ext3 filesystem as ext2
[ 12.208860] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
[ 12.254281] kjournald starting. Commit interval 5 seconds
[ 12.254281] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 12.255494] EXT3 FS on sda1, internal journal
[ 12.255498] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.983926] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 16.055343] NET: Registered protocol family 10
[ 16.055343] lo: Disabled Privacy Extensions
[ 18.640923] lp0: using parport0 (interrupt-driven).
[ 18.667339] ppdev: user-space parallel port driver
[ 21.083995] device eth0 entered promiscuous mode
[ 26.584315] eth0: no IPv6 routers present
[ 29.118852] [drm] Initialized drm 1.1.0 20060810
[ 29.231966] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 29.231966] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[ 30.988697] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[ 30.988723] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 30.988841] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 31.415371] [drm] Setting GART location based on new memory map
[ 31.415378] [drm] Loading R200 Microcode
[ 31.415414] [drm] writeback test succeeded in 1 usecs
[ 46.081770] eth0: no IPv6 routers present
[ 469.055326] ppdev0: registered pardevice
[ 470.531339] sysctl table check failed: /dev/parport/parport0/devices/ppdev0/timeslice Sysctl already exists
[ 470.531339] Pid: 3690, comm: hpijs Not tainted 2.6.26-2-686 #1
[ 470.531339] [<c0135c4c>] set_fail+0x30/0x39
[ 470.531339] [<c0136074>] sysctl_check_table+0x41f/0x463
[ 470.531339] [<c013608b>] sysctl_check_table+0x436/0x463
[ 470.531339] [<c013608b>] sysctl_check_table+0x436/0x463
[ 470.531339] [<c013608b>] sysctl_check_table+0x436/0x463
[ 470.531339] [<c013608b>] sysctl_check_table+0x436/0x463
[ 470.531339] [<c013608b>] sysctl_check_table+0x436/0x463
[ 470.531339] [<c012817d>] __register_sysctl_paths+0xbe/0x10a
[ 470.531339] [<c01281e4>] register_sysctl_paths+0x1b/0x1d
[ 470.531339] [<f89ad1cc>] parport_device_proc_register+0xa2/0xbc [parport]
[ 470.531339] [<f89abb01>] parport_register_device+0x1a2/0x1ea [parport]
[ 470.531339] [<f8b356bc>] pp_ioctl+0x134/0x6c4 [ppdev]
[ 470.531339] [<f8b351a6>] pp_irq+0x0/0x3d [ppdev]
[ 470.531339] [<c016a58f>] free_pages_and_swap_cache+0x6a/0x7e
[ 470.531339] [<c017e81b>] vfs_ioctl+0x47/0x5d
[ 470.531339] [<c017ea7b>] do_vfs_ioctl+0x24a/0x261
[ 470.531339] [<c017ead3>] sys_ioctl+0x41/0x5a
[ 470.531339] [<c0103857>] sysenter_past_esp+0x78/0xb1
[ 470.531339] =======================
[ 470.531339] ppdev0: registered pardevice
[ 654.881577] ppdev0: unregistered pardevice
[ 665.866981] ppdev0: unregistered pardevice
[ 822.967022] ppdev0: registered pardevice
[ 823.316659] sysctl table check failed: /dev/parport/parport0/devices/ppdev0/timeslice Sysctl already exists
[ 823.316672] Pid: 3737, comm: hpijs Not tainted 2.6.26-2-686 #1
[ 823.316685] [<c0135c4c>] set_fail+0x30/0x39
[ 823.316695] [<c0136074>] sysctl_check_table+0x41f/0x463
[ 823.316702] [<c013608b>] sysctl_check_table+0x436/0x463
[ 823.316708] [<c013608b>] sysctl_check_table+0x436/0x463
[ 823.316715] [<c013608b>] sysctl_check_table+0x436/0x463
[ 823.316721] [<c013608b>] sysctl_check_table+0x436/0x463
[ 823.316727] [<c013608b>] sysctl_check_table+0x436/0x463
[ 823.316733] [<c012817d>] __register_sysctl_paths+0xbe/0x10a
[ 823.316741] [<c01281e4>] register_sysctl_paths+0x1b/0x1d
[ 823.316745] [<f89ad1cc>] parport_device_proc_register+0xa2/0xbc [parport]
[ 823.316756] [<f89abb01>] parport_register_device+0x1a2/0x1ea [parport]
[ 823.316765] [<f8b356bc>] pp_ioctl+0x134/0x6c4 [ppdev]
[ 823.316770] [<f8b351a6>] pp_irq+0x0/0x3d [ppdev]
[ 823.316775] [<c016a58f>] free_pages_and_swap_cache+0x6a/0x7e
[ 823.316782] [<c017e81b>] vfs_ioctl+0x47/0x5d
[ 823.316788] [<c017ea7b>] do_vfs_ioctl+0x24a/0x261
[ 823.316794] [<c017ead3>] sys_ioctl+0x41/0x5a
[ 823.316799] [<c0103857>] sysenter_past_esp+0x78/0xb1
[ 823.316809] =======================
[ 823.316812] ppdev0: registered pardevice
[ 1002.125308] ppdev0: unregistered pardevice
[ 1013.055389] ppdev0: unregistered pardevice
[ 1912.400464] hda-intel: Invalid position buffer, using LPIB read method instead.
[ 4488.554393] usb 3-2: new full speed USB device using uhci_hcd and address 3
[ 4488.746816] usb 3-2: configuration #1 chosen from 1 choice
[ 4488.751799] usb 3-2: New USB device found, idVendor=0ac8, idProduct=307b
[ 4488.751803] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4488.751806] usb 3-2: Product: PC Camera
[ 4488.751807] usb 3-2: Manufacturer: Vimicro Corp.
root@alfa:/home/witek#
na stronce ktora podał DadaD nie znalazlem takiego id. To znaczy ze kamerka nie jest obslugiwana i nie da sie jej uruchomic ?
