Co pewien czas samoistnie resetuje mi się komputer, ale mam tak tylko pod systemem Linux, tzn. miałem tak na Kubuntu 8.04 i teraz mam tak na Debianie 5.0.
Pod Windowsem mi się to nie zdarza.
Macie jakieś propozycje? Co może być powodem?
Samoistny reset komputera po róznym czasie - Lenny
Zauważyłem, że resetuje się zazwyczaj gdy przeglądam internet lub słucham muzyki.
Tak jakby zachodziło jakieś przeciążenie, ale to mało prawdopodobne, na Windowsie robię 100 rzeczy i nic się nie wyłącza.
Tutaj dołączam parę informacji:
Tak jakby zachodziło jakieś przeciążenie, ale to mało prawdopodobne, na Windowsie robię 100 rzeczy i nic się nie wyłącza.
Tutaj dołączam parę informacji:
Kod: Zaznacz cały
uname -a
Linux shad0w193alfa1pl 2.6.26-2-686 #1 SMP Wed Aug 19 06:06:52 UTC 2009 i686 GNU/LinuxKod: Zaznacz cały
dpkg --print-architecture
i386Kod: Zaznacz cały
lspci -k
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 03)
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:01.0 PCI bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE Host-to-AGP Bridge (rev 03)
Kernel modules: shpchp
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 02)
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 02)
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 02)
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 02)
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 82)
Kernel modules: shpchp
00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge (rev 02)
Kernel modules: iTCO_wdt, intel-rng
00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 02)
Kernel driver in use: PIIX_IDE
Kernel modules: piix
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 02)
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (rev 01)
Kernel modules: radeonfb
01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (Secondary) (rev 01)
02:0a.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
Kernel driver in use: EMU10K1_Audigy
Kernel modules: snd-emu10k1
02:0a.1 Input device controller: Creative Labs SB Live! Game Port (rev 07)
Kernel driver in use: Emu10k1_gameport
Kernel modules: emu10k1-gp
02:0b.0 Communication controller: Conexant HSF 56k Data/Fax/Voice/Spkp (w/Handset) Modem (WorldW SmartDAA) (rev 01)
02:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Kernel driver in use: 8139too
Kernel modules: 8139too, 8139cpKod: Zaznacz cały
cat /var/log/messages
cat /var/log/kern.logcat /var/log/messages:
Kod: Zaznacz cały
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 1.576304] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 1.581513] brd: module loaded
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 1.581823] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 1.581829] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 1.582406] serio: i8042 KBD port at 0x60,0x64 irq 1
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 1.582817] mice: PS/2 mouse device common for all mice
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 1.583190] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 1.583218] rtc0: alarms up to one month
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 1.583356] cpuidle: using governor ladder
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 1.583362] cpuidle: using governor menu
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 1.583375] No iBFT detected.
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 1.584200] TCP cubic registered
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 1.584207] NET: Registered protocol family 17
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 1.584223] Using IPI No-Shortcut mode
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 1.584666] registered taskstats version 1
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 1.584898] rtc_cmos 00:02: setting system clock to 2010-01-01 21:05:46 UTC (1262379946)
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 1.585304] Freeing unused kernel memory: 244k freed
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 1.602550] input: AT Translated Set 2 keyboard as /class/input/input0
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 1.779934] ACPI: ACPI0007:00 is registered as cooling_device0
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 2.982427] usbcore: registered new interface driver usbfs
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 2.982481] usbcore: registered new interface driver hub
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 2.982579] usbcore: registered new device driver usb
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 2.998515] USB Universal Host Controller Interface driver v3.0
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 2.998594] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 2.998623] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 2.998860] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 2.998912] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000b800
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 2.999078] usb usb1: configuration #1 chosen from 1 choice
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 2.999136] hub 1-0:1.0: USB hub found
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 2.999154] hub 1-0:1.0: 2 ports detected
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.079957] Uniform Multi-Platform E-IDE driver
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.079968] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.100274] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.100283] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.100289] usb usb1: Product: UHCI Host Controller
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.100292] usb usb1: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.100296] usb usb1: SerialNumber: 0000:00:1d.0
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.100420] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.100445] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.100516] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.100562] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b000
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.100717] usb usb2: configuration #1 chosen from 1 choice
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.100784] hub 2-0:1.0: USB hub found
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.100802] hub 2-0:1.0: 2 ports detected
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.183784] 8139too Fast Ethernet driver 0.9.28
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.204245] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.204253] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.204258] usb usb2: Product: UHCI Host Controller
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.204262] usb usb2: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.204266] usb usb2: SerialNumber: 0000:00:1d.1
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.204369] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.204395] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.204460] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.204503] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.204663] usb usb3: configuration #1 chosen from 1 choice
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.204727] hub 3-0:1.0: USB hub found
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.204748] hub 3-0:1.0: 2 ports detected
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.253056] Floppy drive(s): fd0 is 1.44M
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.271927] FDC 0 is a post-1991 82077
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.308248] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.308257] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.308262] usb usb3: Product: UHCI Host Controller
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.308266] usb usb3: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.308270] usb usb3: SerialNumber: 0000:00:1d.2
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.308436] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.308469] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.308544] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.312488] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe6100000
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.340067] usb 1-2: new low speed USB device using uhci_hcd and address 2
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.352053] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.352224] usb usb4: configuration #1 chosen from 1 choice
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.352284] hub 4-0:1.0: USB hub found
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.352302] hub 4-0:1.0: 6 ports detected
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.456269] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.456277] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.456282] usb usb4: Product: EHCI Host Controller
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.456285] usb usb4: Manufacturer: Linux 2.6.26-2-686 ehci_hcd
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.456289] usb usb4: SerialNumber: 0000:00:1d.7
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.461325] ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 17 (level, low) -> IRQ 17
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.462233] eth0: RealTek RTL8139 at 0xac00, 00:11:2f:8d:33:14, IRQ 17
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.463048] ICH4: IDE controller (0x8086:0x24cb rev 0x02) at PCI slot 0000:00:1f.1
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.463068] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.463087] ICH4: not 100% native mode: will probe irqs later
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.463106] ide0: BM-DMA at 0xf000-0xf007
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.463122] ide1: BM-DMA at 0xf008-0xf00f
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.477318] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 3.976193] hdb: ST3320620A, ATA DISK drive
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 4.032559] hdb: UDMA/100 mode selected
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 4.328023] usb 4-4: new high speed USB device using ehci_hcd and address 4
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 4.461545] usb 4-4: configuration #1 chosen from 1 choice
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 4.461942] hub 4-4:1.0: USB hub found
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 4.462335] hub 4-4:1.0: 4 ports detected
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 4.568242] usb 4-4: New USB device found, idVendor=05e3, idProduct=0606
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 4.568249] usb 4-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 4.568253] usb 4-4: Product: USB2.0 Hub
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 4.768192] hdc: HL-DT-ST GCE-8320B, ATAPI CD/DVD-ROM drive
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 4.808024] usb 1-2: new low speed USB device using uhci_hcd and address 3
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 4.960004] usb 1-2: configuration #1 chosen from 1 choice
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 4.995269] usb 1-2: New USB device found, idVendor=09da, idProduct=000e
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 4.995277] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 4.995282] usb 1-2: Product: PS/2+USB Mouse
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 4.995285] usb 1-2: Manufacturer: A4Tech
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 5.232024] usb 2-1: new full speed USB device using uhci_hcd and address 2
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 5.392006] usb 2-1: configuration #1 chosen from 1 choice
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 5.446642] usb 2-1: New USB device found, idVendor=1110, idProduct=9031
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 5.446642] usb 2-1: New USB device strings: Mfr=0, Product=2, SerialNumber=3
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 5.446642] usb 2-1: Product: ADSL-USB Modem
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 5.446642] usb 2-1: SerialNumber: 0015569427B1
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 5.552284] hdd: HL-DT-ST DVDRAM GSA-H10N, ATAPI CD/DVD-ROM drive
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 5.608213] hdc: MWDMA2 mode selected
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 5.609069] hdd: UDMA/33 mode selected
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 5.609559] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 5.611038] ide1 at 0x170-0x177,0x376 on irq 15
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 5.619760] No dock devices found.
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 5.637410] SCSI subsystem initialized
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 5.656632] usb 4-4.1: new full speed USB device using ehci_hcd and address 5
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 5.723768] hdb: max request size: 512KiB
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 5.752728] usb 4-4.1: configuration #1 chosen from 1 choice
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 5.753244] usb 4-4.1: New USB device found, idVendor=1019, idProduct=0c55
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 5.753251] usb 4-4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 5.753257] usb 4-4.1: Product: USB Storage Device
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 5.753260] usb 4-4.1: Manufacturer: ICneric
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 5.753263] usb 4-4.1: SerialNumber: 0AEC305000001A000
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 5.766827] hdb: 625142448 sectors (320072 MB) w/16384KiB Cache, CHS=38913/255/63
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 5.791209] hdb: cache flushes supported
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 5.791307] hdb: hdb1 hdb2 < hdb5 hdb6<6>Initializing USB Mass Storage driver...
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 5.851864] hdb7 hdb8 >
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 5.863009] hdc: ATAPI 40X CD-ROM CD-R/RW drive, 8192kB Cache
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 5.863021] Uniform CD-ROM driver Revision: 3.20
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 5.866531] hdd: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 5.952356] usb 4-4.3: new high speed USB device using ehci_hcd and address 6
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 6.053110] usb 4-4.3: configuration #1 chosen from 1 choice
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 6.053571] usb 4-4.3: New USB device found, idVendor=13fe, idProduct=1f23
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 6.053578] usb 4-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 6.053582] usb 4-4.3: Product: STORE N GO
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 6.053585] usb 4-4.3: Manufacturer: Verbatim
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 6.053587] usb 4-4.3: SerialNumber: 078710E30476
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 6.252358] usb 4-4.4: new full speed USB device using ehci_hcd and address 7
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 6.345718] usb 4-4.4: configuration #1 chosen from 1 choice
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 6.346175] usb 4-4.4: New USB device found, idVendor=0ac8, idProduct=303b
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 6.346182] usb 4-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 6.346187] usb 4-4.4: Product: PC Camera
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 6.346190] usb 4-4.4: Manufacturer: Vimicro Corp.
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 6.346285] usbcore: registered new interface driver hiddev
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 6.347186] scsi0 : SCSI emulation for USB Mass Storage devices
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 6.347552] scsi1 : SCSI emulation for USB Mass Storage devices
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 6.347737] usbcore: registered new interface driver usb-storage
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 6.347747] USB Mass Storage support registered.
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 6.360847] input: A4Tech PS/2+USB Mouse as /class/input/input1
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 6.372164] input,hidraw0: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:1d.0-2
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 6.372210] usbcore: registered new interface driver usbhid
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 6.372217] usbhid: v2.6:USB HID core driver
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 6.708101] PM: Starting manual resume from disk
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 6.767585] kjournald starting. Commit interval 5 seconds
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 6.767616] EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 8.261084] udevd version 125 started
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 10.579086] Linux agpgart interface v0.103
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 10.600102] agpgart: Detected an Intel 830M Chipset.
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 10.604101] agpgart: AGP aperture is 64M @ 0xe0000000
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 10.615031] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 10.625994] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 10.955349] input: Power Button (FF) as /class/input/input2
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 10.987608] ACPI: Power Button (FF) [PWRF]
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 10.987745] input: Power Button (CM) as /class/input/input3
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 11.012149] ACPI: Power Button (CM) [PWRB]
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 11.353605] scsi 1:0:0:0: Direct-Access Verbatim STORE N GO 5.00 PQ: 0 ANSI: 0 CCS
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 11.357598] scsi 0:0:0:0: Direct-Access IC USB Storage-CFC 322E PQ: 0 ANSI: 0 CCS
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 11.358592] scsi 0:0:0:1: Direct-Access IC USB Storage-SMC 322E PQ: 0 ANSI: 0 CCS
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 11.359611] scsi 0:0:0:2: Direct-Access IC USB Storage-MMC 322E PQ: 0 ANSI: 0 CCS
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 11.360726] scsi 0:0:0:3: Direct-Access IC USB Storage-MSC 322E PQ: 0 ANSI: 0 CCS
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 12.474722] NET: Registered protocol family 8
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 12.474728] NET: Registered protocol family 20
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 12.551535] [ueagle-atm] driver ueagle 1.4 loaded
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 12.551577] usb 2-1: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X9031) Rev (0X200B): Eagle III
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 12.660065] usb 2-1: reset full speed USB device using uhci_hcd and address 2
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 12.742907] intel_rng: FWH not detected
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 12.871941] usb 2-1: [ueagle-atm] using iso mode
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 12.872319] usb 2-1: [ueagle-atm] (re)booting started
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 12.873855] usbcore: registered new interface driver ueagle-atm
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 13.069103] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 13.123937] input: PC Speaker as /class/input/input4
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 13.296003] Linux video capture interface: v2.00
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 13.354044] zc0301: V4L2 driver for ZC0301[P] Image Processor and Control Chip v1:1.10
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 13.354116] usb 4-4.4: ZC0301[P] Image Processor and Control Chip detected (vid/pid 0x0AC8:0x303B)
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 13.464458] usb 4-4.4: PB-0330 image sensor detected
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 13.561177] gameport: EMU10K1 is pci0000:02:0a.1/gameport0, io 0xa400, speed 903kHz
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 13.744499] usb 4-4.4: Initialization succeeded
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 13.744576] usb 4-4.4: V4L2 device registered as /dev/video0
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 13.744617] usbcore: registered new interface driver zc0301
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 13.913219] parport_pc 00:08: reported by Plug and Play ACPI
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 13.913326] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 14.110518] gameport: NS558 PnP Gameport is pnp00:0a/gameport0, io 0x201, speed 806kHz
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 14.328058] firmware: requesting ueagle-atm/DSPep.bin
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 14.799727] Driver 'sd' needs updating - please use bus_type methods
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 14.800505] sd 1:0:0:0: [sda] 7827456 512-byte hardware sectors (4008 MB)
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 14.801284] sd 1:0:0:0: [sda] Write Protect is off
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 14.804105] sd 1:0:0:0: [sda] 7827456 512-byte hardware sectors (4008 MB)
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 14.804755] sd 1:0:0:0: [sda] Write Protect is off
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 14.804842] sda: sda1
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 14.805875] sd 1:0:0:0: [sda] Attached SCSI removable disk
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 14.807665] sd 0:0:0:0: [sdb] Attached SCSI removable disk
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 14.809425] sd 0:0:0:1: [sdc] Attached SCSI removable disk
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 14.811195] sd 0:0:0:2: [sdd] Attached SCSI removable disk
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 14.813035] sd 0:0:0:3: [sde] Attached SCSI removable disk
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 16.200836] usb 2-1: [ueagle-atm] ATU-R firmware version : 44e2ea17
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 16.200847] firmware: requesting ueagle-atm/CMVep.bin.v2
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 16.207143] ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 22
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 16.620637] usb 2-1: [Ueagle-atm] requesting firmware ueagle-atm/CMVep.bin.v2 failed, try to get older cmvs
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 16.620647] firmware: requesting ueagle-atm/CMVep.bin
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 16.769648] usb 2-1: [Ueagle-atm] use deprecated cmvs version, please update your firmware
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 16.816848] usb 2-1: [ueagle-atm] modem started, waiting synchronization...
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 17.423946] Adding 3903752k swap on /dev/hdb7. Priority:-1 extents:1 across:3903752k
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 17.706017] EXT3 FS on hdb6, internal journal
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 18.329966] loop: module loaded
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 18.844067] kjournald starting. Commit interval 5 seconds
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 18.844322] EXT3 FS on hdb8, internal journal
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 18.844333] EXT3-fs: mounted filesystem with ordered data mode.
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 19.778608] PPP generic driver version 2.4.2
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 19.947156] NET: Registered protocol family 10
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 19.947959] lo: Disabled Privacy Extensions
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 21.820432] usb 2-1: [ueagle-atm] modem synchronization failed (may be try other cmv/dsp)
Jan 1 21:06:07 shad0w193alfa1pl kernel: [ 21.820442] usb 2-1: [ueagle-atm] (re)booting started
Jan 1 21:06:07 shad0w193alfa1pl rsyslogd: [origin software="rsyslogd" swVersion="3.18.6" x-pid="2531" x-info="http://www.rsyslog.com"] restart
Jan 1 21:06:08 shad0w193alfa1pl kernel: [ 23.232125] firmware: requesting ueagle-atm/DSPep.bin
Jan 1 21:06:08 shad0w193alfa1pl kernel: [ 23.413168] lp0: using parport0 (interrupt-driven).
Jan 1 21:06:08 shad0w193alfa1pl kernel: [ 23.442237] ppdev: user-space parallel port driver
Jan 1 21:06:08 shad0w193alfa1pl kernel: [ 23.548877] usb 2-1: [ueagle-atm] ATU-R firmware version : 44e2ea17
Jan 1 21:06:08 shad0w193alfa1pl kernel: [ 23.548877] firmware: requesting ueagle-atm/CMVep.bin.v2
Jan 1 21:06:08 shad0w193alfa1pl kernel: [ 23.567585] usb 2-1: [Ueagle-atm] requesting firmware ueagle-atm/CMVep.bin.v2 failed, try to get older cmvs
Jan 1 21:06:08 shad0w193alfa1pl kernel: [ 23.567599] firmware: requesting ueagle-atm/CMVep.bin
Jan 1 21:06:08 shad0w193alfa1pl kernel: [ 23.598496] usb 2-1: [Ueagle-atm] use deprecated cmvs version, please update your firmware
Jan 1 21:06:08 shad0w193alfa1pl kernel: [ 23.639913] usb 2-1: [ueagle-atm] modem started, waiting synchronization...
Jan 1 21:06:10 shad0w193alfa1pl dhcdbd: Started up.
Jan 1 21:06:12 shad0w193alfa1pl kernel: [ 27.261538] eth0: link down
Jan 1 21:06:12 shad0w193alfa1pl kernel: [ 27.262581] ADDRCONF(NETDEV_UP): eth0: link is not ready
Jan 1 21:06:14 shad0w193alfa1pl kernel: [ 29.487150] [drm] Initialized drm 1.1.0 20060810
Jan 1 21:06:14 shad0w193alfa1pl kernel: [ 29.497827] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Jan 1 21:06:14 shad0w193alfa1pl kernel: [ 29.498128] [drm] Initialized radeon 1.29.0 20080528 on minor 0
Jan 1 21:06:15 shad0w193alfa1pl kernel: [ 30.091103] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
Jan 1 21:06:15 shad0w193alfa1pl kernel: [ 30.091145] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
Jan 1 21:06:15 shad0w193alfa1pl kernel: [ 30.091179] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
Jan 1 21:06:15 shad0w193alfa1pl kernel: [ 30.472518] [drm] Setting GART location based on new memory map
Jan 1 21:06:15 shad0w193alfa1pl kernel: [ 30.472518] [drm] Loading R200 Microcode
Jan 1 21:06:15 shad0w193alfa1pl kernel: [ 30.472518] [drm] writeback test succeeded in 1 usecs
Jan 1 21:06:21 shad0w193alfa1pl kernel: [ 36.676114] usb 2-1: [ueagle-atm] modem operational
Jan 1 21:06:35 shad0w193alfa1pl pppd[2190]: LCP: timeout sending Config-Requests
Jan 1 21:06:35 shad0w193alfa1pl pppd[2190]: Connection terminated.
Jan 1 21:06:35 shad0w193alfa1pl pppd[2190]: Modem hangup
Jan 1 21:06:39 shad0w193alfa1pl pppd[2190]: Using interface ppp0
Jan 1 21:06:39 shad0w193alfa1pl pppd[2190]: Connect: ppp0 <--> 0.35
Jan 1 21:06:43 shad0w193alfa1pl pppd[2190]: CHAP authentication succeeded
Jan 1 21:06:43 shad0w193alfa1pl pppd[2190]: CHAP authentication succeeded
Jan 1 21:06:43 shad0w193alfa1pl kernel: [ 58.549340] PPP BSD Compression module registered
Jan 1 21:06:43 shad0w193alfa1pl kernel: [ 58.735414] PPP Deflate Compression module registered
Jan 1 21:06:43 shad0w193alfa1pl pppd[2190]: local IP address 79.185.4.127
Jan 1 21:06:43 shad0w193alfa1pl pppd[2190]: remote IP address 213.25.2.173
Jan 1 21:06:43 shad0w193alfa1pl pppd[2190]: primary DNS address 194.204.159.1
Jan 1 21:06:43 shad0w193alfa1pl pppd[2190]: secondary DNS address 194.204.152.34
Jan 1 21:14:12 shad0w193alfa1pl kernel: [ 507.567881] UDF-fs: No VRS foundInteresuje mnie wynik poleceń:
Dlaczego, miałem już podobną sytuację przy wersji stabilnej Debiana. Powodem była zła kolejność uruchamiania usług i programów. Nie pamiętam już co zmieniałem ale było to jakieś odwołanie do crona, powiązane z wyłączaniem komputera.
Kod: Zaznacz cały
ls -l /etc/rc0.d
ls -l /etc/rc1.d
ls -l /etc/rc2.d
ls -l /etc/rc3.d
ls -l /etc/rc4.d
ls -l /etc/rc5.d
ls -l /etc/rc6.d
ls -l /etc/rcS.d